Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

34 files changed, 502 insertions, 182 deletions

diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 7486bffd3eb..eeba0a70e46 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -1,3 +1,12 @@
+config PPC_47x
+	bool "Support for 47x variant"
+	depends on 44x
+	default n
+	select MPIC
+	help
+	  This option enables support for the 47x family of processors and is
+	  not currently compatible with other 44x or 46x varients
+
 config BAMBOO
 	bool "Bamboo"
 	depends on 44x
@@ -151,6 +160,17 @@ config YOSEMITE
 	help
 	  This option enables support for the AMCC PPC440EP evaluation board.
 
+config ISS4xx
+	bool "ISS 4xx Simulator"
+	depends on (44x || 40x)
+	default n
+	select 405GP if 40x
+	select 440GP if 44x && !PPC_47x
+	select PPC_FPU
+	select OF_RTC
+	help
+	  This option enables support for the IBM ISS simulation environment
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index ee6185aeaa3..82ff326e079 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
+obj-$(CONFIG_ISS4xx)	+= iss4xx.o
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
new file mode 100644
index 00000000000..aa46e9d1e77
--- /dev/null
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -0,0 +1,167 @@
+/*
+ * PPC476 board specific routines
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+static __initdata struct of_device_id iss4xx_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init iss4xx_device_probe(void)
+{
+	of_platform_bus_probe(NULL, iss4xx_of_bus, NULL);
+	of_instantiate_rtc();
+
+	return 0;
+}
+machine_device_initcall(iss4xx, iss4xx_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init iss4xx_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "ibm,uic")) {
+		uic_init_tree();
+		ppc_md.get_irq = uic_get_irq;
+#ifdef CONFIG_MPIC
+	} else if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+					       " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+#endif
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_iss4xx_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr",
+					       NULL);
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
+		return;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+}
+
+static struct smp_ops_t iss_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_iss4xx_setup_cpu,
+	.kick_cpu	= smp_iss4xx_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init iss4xx_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &iss_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init iss4xx_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init iss4xx_setup_arch(void)
+{
+	iss4xx_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init iss4xx_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,iss-4xx"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(iss4xx) {
+	.name			= "ISS-4xx",
+	.probe			= iss4xx_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= iss4xx_init_irq,
+	.setup_arch		= iss4xx_setup_arch,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 0b4f883b20e..ae525e4745d 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -74,6 +74,7 @@ static int __init mpc831x_rdb_probe(void)
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus" },
 	{ .compatible = "gianfar" },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index a1908d26124..e00801c4254 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -72,6 +72,7 @@ static struct of_device_id mpc837x_ids[] = {
 	{ .compatible = "soc", },
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index d95121894eb..3a2ade2e443 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -51,7 +51,7 @@ config MPC85xx_DS
 	bool "Freescale MPC85xx DS"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
@@ -60,7 +60,7 @@ config MPC85xx_RDB
 	bool "Freescale MPC85xx RDB"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx RDB (P2020 RDB) board
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index fbe9f362142..a0b5638c5dc 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -13,7 +13,7 @@ config MPC8641_HPCN
 	bool "Freescale MPC8641 HPCN"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	select HAS_RAPIDIO
 	select SWIOTLB
 	help
@@ -28,7 +28,7 @@ config SBC8641D
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5abe137f630..018cc67be42 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -83,7 +83,8 @@ static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "fsl,mpc8610-immr", },
 	{ .compatible = "fsl,mpc8610-guts", },
 	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
 	{}
 };
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index a8aae0b5457..d361f8119b1 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -43,7 +43,7 @@ config 40x
 	select PPC_PCI_CHOICE
 
 config 44x
-	bool "AMCC 44x"
+	bool "AMCC 44x, 46x or 47x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
@@ -294,7 +294,7 @@ config PPC_PERF_CTRS
          This enables the powerpc-specific perf_event back-end.
 
 config SMP
-	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
+	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE || PPC_47x
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
@@ -322,6 +322,7 @@ config NR_CPUS
 config NOT_COHERENT_CACHE
 	bool
 	depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
+	default n if PPC_47x
 	default y
 
 config CHECK_CACHE_COHERENCY
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c
index e6506cd0ff9..bfa2c0cb3d1 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c
@@ -118,7 +118,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->cur = cbe_freqs[cur_pmode].frequency;
 
 #ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, &per_cpu(cpu_sibling_map, policy->cpu));
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
 #endif
 
 	cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 57e5b608fa1..174a04ac480 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -69,10 +69,10 @@ void __init wii_memory_fixups(void)
 
 	/*
 	 * This is part of a workaround to allow the use of two
-	 * discontiguous RAM ranges on the Wii, even if this is
+	 * discontinuous RAM ranges on the Wii, even if this is
 	 * currently unsupported on 32-bit PowerPC Linux.
 	 *
-	 * We coealesce the two memory ranges of the Wii into a
+	 * We coalesce the two memory ranges of the Wii into a
 	 * single range, then create a reservation for the "hole"
 	 * between both ranges.
 	 */
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index fba5bf91507..32a56c6dfa7 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -252,8 +252,8 @@ decrementer_iSeries_masked:
 	li	r11,1
 	ld	r12,PACALPPACAPTR(r13)
 	stb	r11,LPPACADECRINT(r12)
-	LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy)
-	lwz	r12,0(r12)
+	li	r12,-1
+	clrldi	r12,r12,33	/* set DEC to 0x7fffffff */
 	mtspr	SPRN_DEC,r12
 	/* fall through */
 
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index b841c9a9db8..3fc2e6494b8 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/of.h>
+#include <linux/ratelimit.h>
 
 #include <asm/types.h>
 #include <asm/io.h>
@@ -584,14 +585,9 @@ static inline struct device_node *xlate_iomm_address(
 
 	orig_addr = (unsigned long __force)addr;
 	if ((orig_addr < BASE_IO_MEMORY) || (orig_addr >= max_io_memory)) {
-		static unsigned long last_jiffies;
-		static int num_printed;
+		static DEFINE_RATELIMIT_STATE(ratelimit, 60 * HZ, 10);
 
-		if (time_after(jiffies, last_jiffies + 60 * HZ)) {
-			last_jiffies = jiffies;
-			num_printed = 0;
-		}
-		if (num_printed++ < 10)
+		if (__ratelimit(&ratelimit))
 			printk(KERN_ERR
 				"iSeries_%s: invalid access at IO address %p\n",
 				func, addr);
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 722335e32fd..6590850045a 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -83,7 +83,7 @@ static void smp_iSeries_message_pass(int target, int msg)
 
 static int smp_iSeries_probe(void)
 {
-	return cpus_weight(cpu_possible_map);
+	return cpumask_weight(cpu_possible_mask);
 }
 
 static void smp_iSeries_kick_cpu(int nr)
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index d35e0520abf..c16537bc0c6 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -213,7 +213,7 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	pr_debug("current astate is at %d\n",cur_astate);
 
 	policy->cur = pas_freqs[cur_astate].frequency;
-	cpumask_copy(policy->cpus, &cpu_online_map);
+	cpumask_copy(policy->cpus, cpu_online_mask);
 
 	ppc_proc_freq = policy->cur * 1000ul;
 
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 3ca09d3ccce..9650c6029c8 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -362,7 +362,7 @@ static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	/* secondary CPUs are tied to the primary one by the
 	 * cpufreq core if in the secondary policy we tell it that
 	 * it actually must be one policy together with all others. */
-	cpumask_copy(policy->cpus, &cpu_online_map);
+	cpumask_copy(policy->cpus, cpu_online_mask);
 	cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
 
 	return cpufreq_frequency_table_cpuinfo(policy,
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index f45331ab97c..06a137c5b8b 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -592,7 +592,7 @@ static void __init kw_i2c_probe(void)
 	/* Probe keywest-i2c busses */
 	for_each_compatible_node(np, "i2c","keywest-i2c") {
 		struct pmac_i2c_host_kw *host;
-		int multibus, chans, i;
+		int multibus;
 
 		/* Found one, init a host structure */
 		host = kw_i2c_host_init(np);
@@ -614,6 +614,8 @@ static void __init kw_i2c_probe(void)
 		 * parent type
 		 */
 		if (multibus) {
+			int chans, i;
+
 			parent = of_get_parent(np);
 			if (parent == NULL)
 				continue;
@@ -1258,8 +1260,7 @@ static void pmac_i2c_do_end(struct pmf_function *func, void *instdata)
 	if (inst == NULL)
 		return;
 	pmac_i2c_close(inst->bus);
-	if (inst)
-		kfree(inst);
+	kfree(inst);
 }
 
 static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len)
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 3362e781b6a..f0bc08f6c1f 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -33,6 +33,8 @@ extern void pmac_setup_pci_dma(void);
 extern void pmac_check_ht_link(void);
 
 extern void pmac_setup_smp(void);
+extern void pmac32_cpu_die(void);
+extern void low_cpu_die(void) __attribute__((noreturn));
 
 extern int pmac_nvram_init(void);
 extern void pmac_pic_init(void);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 15c2241f9c7..f1d0132ebcc 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -480,7 +480,7 @@ static void __init pmac_init_early(void)
 #endif
 
 	/* SMP Init has to be done early as we need to patch up
-	 * cpu_possible_map before interrupt stacks are allocated
+	 * cpu_possible_mask before interrupt stacks are allocated
 	 * or kaboom...
 	 */
 #ifdef CONFIG_SMP
@@ -646,7 +646,7 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
 /* access per cpu vars from generic smp.c */
 DECLARE_PER_CPU(int, cpu_state);
 
-static void pmac_cpu_die(void)
+static void pmac64_cpu_die(void)
 {
 	/*
 	 * turn off as much as possible, we'll be
@@ -717,8 +717,13 @@ define_machine(powermac) {
 	.pcibios_after_init	= pmac_pcibios_after_init,
 	.phys_mem_access_prot	= pci_phys_mem_access_prot,
 #endif
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
-	.cpu_die		= pmac_cpu_die,
+#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_PPC64
+	.cpu_die		= pmac64_cpu_die,
+#endif
+#ifdef CONFIG_PPC32
+	.cpu_die		= pmac32_cpu_die,
+#endif
 #endif
 #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
 	.cpu_die		= generic_mach_cpu_die,
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 6898e8241cd..c95215f4f8b 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -53,6 +53,8 @@
 #include <asm/pmac_low_i2c.h>
 #include <asm/pmac_pfunc.h>
 
+#include "pmac.h"
+
 #undef DEBUG
 
 #ifdef DEBUG
@@ -315,7 +317,7 @@ static int __init smp_psurge_probe(void)
 	/* This is necessary because OF doesn't know about the
 	 * secondary cpu(s), and thus there aren't nodes in the
 	 * device tree for them, and smp_setup_cpu_maps hasn't
-	 * set their bits in cpu_present_map.
+	 * set their bits in cpu_present_mask.
 	 */
 	if (ncpus > NR_CPUS)
 		ncpus = NR_CPUS;
@@ -878,10 +880,9 @@ int smp_core99_cpu_disable(void)
 	return 0;
 }
 
-extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */
 static int cpu_dead[NR_CPUS];
 
-void cpu_die(void)
+void pmac32_cpu_die(void)
 {
 	local_irq_disable();
 	cpu_dead[smp_processor_id()] = 1;
@@ -944,7 +945,7 @@ void __init pmac_setup_smp(void)
 	}
 #ifdef CONFIG_PPC32
 	else {
-		/* We have to set bits in cpu_possible_map here since the
+		/* We have to set bits in cpu_possible_mask here since the
 		 * secondary CPU(s) aren't in the device tree. Various
 		 * things won't be initialized for CPUs not in the possible
 		 * map, so we really need to fix it up here.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 0ff5174ae4f..3dbef309bc8 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -7,7 +7,7 @@ EXTRA_CFLAGS		+= -DDEBUG
 endif
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
-			   setup.o iommu.o ras.o \
+			   setup.o iommu.o event_sources.o ras.o \
 			   firmware.o power.o dlpar.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_XICS)	+= xics.o
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index e1682bc168a..d71e5858408 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -79,13 +79,12 @@ static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
 	 * prepend this to the full_name.
 	 */
 	name = (char *)ccwa + ccwa->name_offset;
-	dn->full_name = kmalloc(strlen(name) + 2, GFP_KERNEL);
+	dn->full_name = kasprintf(GFP_KERNEL, "/%s", name);
 	if (!dn->full_name) {
 		kfree(dn);
 		return NULL;
 	}
 
-	sprintf(dn->full_name, "/%s", name);
 	return dn;
 }
 
@@ -410,15 +409,13 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	 * directory of the device tree.  CPUs actually live in the
 	 * cpus directory so we need to fixup the full_name.
 	 */
-	cpu_name = kzalloc(strlen(dn->full_name) + strlen("/cpus") + 1,
-			   GFP_KERNEL);
+	cpu_name = kasprintf(GFP_KERNEL, "/cpus%s", dn->full_name);
 	if (!cpu_name) {
 		dlpar_free_cc_nodes(dn);
 		rc = -ENOMEM;
 		goto out;
 	}
 
-	sprintf(cpu_name, "/cpus%s", dn->full_name);
 	kfree(dn->full_name);
 	dn->full_name = cpu_name;
 
@@ -433,6 +430,7 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	if (rc) {
 		dlpar_release_drc(drc_index);
 		dlpar_free_cc_nodes(dn);
+		goto out;
 	}
 
 	rc = dlpar_online_cpu(dn);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 7df7fbb7cac..34b7dc12e73 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -749,7 +749,7 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn)
 	/* Determine type of EEH reset required by device,
 	 * default hot reset or fundamental reset
 	 */
-	if (dev->needs_freset)
+	if (dev && dev->needs_freset)
 		rtas_pci_slot_reset(pdn, 3);
 	else
 		rtas_pci_slot_reset(pdn, 1);
diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c
new file mode 100644
index 00000000000..e889c9d9586
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/event_sources.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2001 Dave Engebretsen IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <asm/prom.h>
+
+#include "pseries.h"
+
+void request_event_sources_irqs(struct device_node *np,
+				irq_handler_t handler,
+				const char *name)
+{
+	int i, index, count = 0;
+	struct of_irq oirq;
+	const u32 *opicprop;
+	unsigned int opicplen;
+	unsigned int virqs[16];
+
+	/* Check for obsolete "open-pic-interrupt" property. If present, then
+	 * map those interrupts using the default interrupt host and default
+	 * trigger
+	 */
+	opicprop = of_get_property(np, "open-pic-interrupt", &opicplen);
+	if (opicprop) {
+		opicplen /= sizeof(u32);
+		for (i = 0; i < opicplen; i++) {
+			if (count > 15)
+				break;
+			virqs[count] = irq_create_mapping(NULL, *(opicprop++));
+			if (virqs[count] == NO_IRQ)
+				printk(KERN_ERR "Unable to allocate interrupt "
+				       "number for %s\n", np->full_name);
+			else
+				count++;
+
+		}
+	}
+	/* Else use normal interrupt tree parsing */
+	else {
+		/* First try to do a proper OF tree parsing */
+		for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
+		     index++) {
+			if (count > 15)
+				break;
+			virqs[count] = irq_create_of_mapping(oirq.controller,
+