powerpc/85xx: Rename p2040_rdb.c to p2041_rdb.c

There's only p2041rdb board for official release, but the p2041 silicon
on the board can be converted to p2040 silicon without XAUI and L2 cache
function, then the board becomes p2040rdb board. so we use the file name
p2041_rdb.c to handle P2040RDB board and P2041RDB board which is also
consistent with the board name under U-Boot.

During the rename we make few other minor changes to the device tree:
* Move USB phy setting into p2041si.dtsi as its SoC not board defined
* Convert PCI clock-frequency to decimal to be more readable

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

3 files changed, 13 insertions, 13 deletions

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 1b393f40c63..1e66edb95d2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -171,8 +171,8 @@ config SBC8560
 	help
 	  This option enables support for the Wind River SBC8560 board
 
-config P2040_RDB
-	bool "Freescale P2040 RDB"
+config P2041_RDB
+	bool "Freescale P2041 RDB"
 	select DEFAULT_UIMAGE
 	select PPC_E500MC
 	select PHYS_64BIT
@@ -182,7 +182,7 @@ config P2040_RDB
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
-	  This option enables support for the P2040 RDB board
+	  This option enables support for the P2041 RDB board
 
 config P3041_DS
 	bool "Freescale P3041 DS"
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index a971b32c5c0..39e6c22f06f 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
-obj-$(CONFIG_P2040_RDB)   += p2040_rdb.o corenet_ds.o
+obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
 obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
diff --git a/arch/powerpc/platforms/85xx/p2040_rdb.c b/arch/powerpc/platforms/85xx/p2041_rdb.c
index 32b56ac73df..eda6ed5683e 100644
--- a/arch/powerpc/platforms/85xx/p2040_rdb.c
+++ b/arch/powerpc/platforms/85xx/p2041_rdb.c
@@ -1,5 +1,5 @@
 /*
- * P2040 RDB Setup
+ * P2041 RDB Setup
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,18 +35,18 @@
 /*
  * Called very early, device-tree isn't unflattened
  */
-static int __init p2040_rdb_probe(void)
+static int __init p2041_rdb_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 #ifdef CONFIG_SMP
 	extern struct smp_ops_t smp_85xx_ops;
 #endif
 
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB"))
+	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB"))
 		return 1;
 
 	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) {
+	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) {
 		ppc_md.init_IRQ = ehv_pic_init;
 		ppc_md.get_irq = ehv_pic_get_irq;
 		ppc_md.restart = fsl_hv_restart;
@@ -66,9 +66,9 @@ static int __init p2040_rdb_probe(void)
 	return 0;
 }
 
-define_machine(p2040_rdb) {
-	.name			= "P2040 RDB",
-	.probe			= p2040_rdb_probe,
+define_machine(p2041_rdb) {
+	.name			= "P2041 RDB",
+	.probe			= p2041_rdb_probe,
 	.setup_arch		= corenet_ds_setup_arch,
 	.init_IRQ		= corenet_ds_pic_init,
 #ifdef CONFIG_PCI
@@ -81,8 +81,8 @@ define_machine(p2040_rdb) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p2040_rdb, corenet_ds_publish_devices);
+machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
 #endif