Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code
  powerpc/pseries: Correct VIO bus accounting problem in CMO env.
  powerpc: More printing warning fixes for the l64 to ll64 conversion
  powerpc: Remove arch/ppc cruft from Kconfig
  powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c
  powerpc/embedded6xx: Update defconfigs
  powerpc/8xx: Update defconfigs
  powerpc/86xx: Update defconfigs
  powerpc/83xx: Update defconfigs
  powerpc/85xx: Update defconfigs
  powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed
  powerpc/4xx: Update multi-board PowerPC 4xx defconfigs
  powerpc/44x: Update PowerPC 44x defconfigs
  powerpc/40x: Update PowerPC 40x defconfigs
  powerpc/85xx: Fix typo in mpc8572ds dts
  powerpc/44x: Warp patches for the new NDFC driver
  powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info

4 files changed, 14 insertions, 149 deletions

diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 698133180ae..01f51daace1 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -3,5 +3,4 @@ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
 obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
-obj-$(CONFIG_WARP)	+= warp-nand.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
deleted file mode 100644
index 89ecd76127d..00000000000
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * PIKA Warp(tm) NAND flash specific routines
- *
- * Copyright (c) 2008 PIKA Technologies
- *   Sean MacLennan <smaclennan@pikatech.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/of.h>
-#include <asm/machdep.h>
-
-
-#ifdef CONFIG_MTD_NAND_NDFC
-
-#define CS_NAND_0	1	/* use chip select 1 for NAND device 0 */
-
-#define WARP_NAND_FLASH_REG_ADDR	0xD0000000UL
-#define WARP_NAND_FLASH_REG_SIZE	0x2000
-
-static struct resource warp_ndfc = {
-	.start = WARP_NAND_FLASH_REG_ADDR,
-	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct mtd_partition nand_parts[] = {
-	{
-		.name   = "kernel",
-		.offset = 0,
-		.size   = 0x0200000
-	},
-	{
-		.name   = "root",
-		.offset = 0x0200000,
-		.size   = 0x3E00000
-	},
-	{
-		.name   = "persistent",
-		.offset = 0x4000000,
-		.size   = 0x4000000
-	},
-	{
-		.name   = "persistent1",
-		.offset = 0x8000000,
-		.size   = 0x4000000
-	},
-	{
-		.name   = "persistent2",
-		.offset = 0xC000000,
-		.size   = 0x4000000
-	}
-};
-
-struct ndfc_controller_settings warp_ndfc_settings = {
-	.ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1),
-	.ndfc_erpn = 0,
-};
-
-static struct ndfc_chip_settings warp_chip0_settings = {
-	.bank_settings = 0x80002222,
-};
-
-struct platform_nand_ctrl warp_nand_ctrl = {
-	.priv = &warp_ndfc_settings,
-};
-
-static struct platform_device warp_ndfc_device = {
-	.name = "ndfc-nand",
-	.id = 0,
-	.dev = {
-		.platform_data = &warp_nand_ctrl,
-	},
-	.num_resources = 1,
-	.resource = &warp_ndfc,
-};
-
-/* Do NOT set the ecclayout: let it default so it is correct for both
- * 64M and 256M flash chips.
- */
-static struct platform_nand_chip warp_nand_chip0 = {
-	.nr_chips = 1,
-	.chip_offset = CS_NAND_0,
-	.nr_partitions = ARRAY_SIZE(nand_parts),
-	.partitions = nand_parts,
-	.chip_delay = 20,
-	.priv = &warp_chip0_settings,
-};
-
-static struct platform_device warp_nand_device = {
-	.name = "ndfc-chip",
-	.id = 0,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &warp_nand_chip0,
-		.parent = &warp_ndfc_device.dev,
-	}
-};
-
-static int warp_setup_nand_flash(void)
-{
-	struct device_node *np;
-
-	/* Try to detect a rev A based on NOR size. */
-	np = of_find_compatible_node(NULL, NULL, "cfi-flash");
-	if (np) {
-		struct property *pp;
-
-		pp = of_find_property(np, "reg", NULL);
-		if (pp && (pp->length == 12)) {
-			u32 *v = pp->value;
-			if (v[2] == 0x4000000) {
-				/* Rev A = 64M NAND */
-				warp_nand_chip0.nr_partitions = 3;
-
-				nand_parts[1].size   = 0x3000000;
-				nand_parts[2].offset = 0x3200000;
-				nand_parts[2].size   = 0x0e00000;
-			}
-		}
-		of_node_put(np);
-	}
-
-	platform_device_register(&warp_ndfc_device);
-	platform_device_register(&warp_nand_device);
-
-	return 0;
-}
-machine_device_initcall(warp, warp_setup_nand_flash);
-
-#endif
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 5177bdd2c62..91a2c80b9d7 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -71,6 +71,7 @@ static int __init mpc831x_rdb_probe(void)
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus" },
+	{ .compatible = "gianfar" },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
index 6cf35cd8d0b..15eb6107bcd 100644
--- a/arch/powerpc/platforms/pseries/phyp_dump.c
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -144,8 +144,8 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 		ph->first_offset_section);
 	printk(KERN_INFO "dump disk sections should be zero\n");
 	printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
-	printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
-	printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+	printk(KERN_INFO "block num = %lld\n", ph->block_num_dd);
+	printk(KERN_INFO "number of blocks = %lld\n", ph->num_of_blocks_dd);
 	printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
 	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
 
@@ -154,33 +154,33 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
 	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
 	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
-	printk(KERN_INFO "cpu source_address =%lx\n",
+	printk(KERN_INFO "cpu source_address =%llx\n",
 		ph->cpu_data.source_address);
-	printk(KERN_INFO "cpu source_length =%lx\n",
+	printk(KERN_INFO "cpu source_length =%llx\n",
 		ph->cpu_data.source_length);
-	printk(KERN_INFO "cpu length_copied =%lx\n",
+	printk(KERN_INFO "cpu length_copied =%llx\n",
 		ph->cpu_data.length_copied);
 
 	printk(KERN_INFO " HPTE AREA \n");
 	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
 	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
 	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
-	printk(KERN_INFO "HPTE source_address =%lx\n",
+	printk(KERN_INFO "HPTE source_address =%llx\n",
 		ph->hpte_data.source_address);
-	printk(KERN_INFO "HPTE source_length =%lx\n",
+	printk(KERN_INFO "HPTE source_length =%llx\n",
 		ph->hpte_data.source_length);
-	printk(KERN_INFO "HPTE length_copied =%lx\n",
+	printk(KERN_INFO "HPTE length_copied =%llx\n",
 		ph->hpte_data.length_copied);
 
 	printk(KERN_INFO " SRSD AREA \n");
 	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
 	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
 	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
-	printk(KERN_INFO "SRSD source_address =%lx\n",
+	printk(KERN_INFO "SRSD source_address =%llx\n",
 		ph->kernel_data.source_address);
-	printk(KERN_INFO "SRSD source_length =%lx\n",
+	printk(KERN_INFO "SRSD source_length =%llx\n",
 		ph->kernel_data.source_length);
-	printk(KERN_INFO "SRSD length_copied =%lx\n",
+	printk(KERN_INFO "SRSD length_copied =%llx\n",
 		ph->kernel_data.length_copied);
 #endif
 }
@@ -367,8 +367,8 @@ static ssize_t show_release_region(struct kobject *kobj,
 	/* total reserved size - start of scratch area */
 	second_addr_range = phyp_dump_info->init_reserve_size -
 				phyp_dump_info->reserved_scratch_size;
-	return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
-			    " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+	return sprintf(buf, "CPU:0x%llx-0x%llx: HPTE:0x%llx-0x%llx:"
+			    " DUMP:0x%llx-0x%llx, 0x%lx-0x%llx:\n",
 		phdr.cpu_data.destination_address,
 		phdr.cpu_data.length_copied,
 		phdr.hpte_data.destination_address,