powerpc/86xx: Renaming following split of GE Fanuc joint venture

This patch renames GE Fanuc boards following the split-up of the GE Fanuc
joint venture. These boards are now made by GE Intelligent platorms.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

6 files changed, 32 insertions, 32 deletions

diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 2bbfd530d6d..fbe9f362142 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -33,32 +33,32 @@ config MPC8610_HPCD
 	  This option enables support for the MPC8610 HPCD board.
 
 config GEF_PPC9A
-	bool "GE Fanuc PPC9A"
+	bool "GE PPC9A"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's PPC9A.
+	  This option enables support for the GE PPC9A.
 
 config GEF_SBC310
-	bool "GE Fanuc SBC310"
+	bool "GE SBC310"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's SBC310.
+	  This option enables support for the GE SBC310.
 
 config GEF_SBC610
-	bool "GE Fanuc SBC610"
+	bool "GE SBC610"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAS_RAPIDIO
 	help
-	  This option enables support for GE Fanuc's SBC610.
+	  This option enables support for the GE SBC610.
 
 endif
 
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index b2ea8875adb..11f7b2b6f49 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -1,9 +1,9 @@
 /*
- * Driver for GE Fanuc's FPGA based GPIO pins
+ * Driver for GE FPGA based GPIO
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -164,6 +164,6 @@ static int __init gef_gpio_init(void)
 };
 arch_initcall(gef_gpio_init);
 
-MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver");
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com");
+MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
 MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 7ad9c0df770..6df9e2561c0 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -1,9 +1,9 @@
 /*
- * Interrupt handling for GE Fanuc's FPGA based PIC
+ * Interrupt handling for GE FPGA based PIC
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index a792e5d8581..60ce07e3910 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc PPC9A board support
+ * GE PPC9A board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_ppc9a_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -151,7 +151,7 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
 		('A' + gef_ppc9a_get_board_rev()));
@@ -235,7 +235,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
 
 define_machine(gef_ppc9a) {
-	.name			= "GE Fanuc PPC9A",
+	.name			= "GE PPC9A",
 	.probe			= gef_ppc9a_probe,
 	.setup_arch		= gef_ppc9a_setup_arch,
 	.init_IRQ		= gef_ppc9a_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 6a1a613836c..3ecee25bf3e 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC310 board support
+ * GE SBC310 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc310_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -142,7 +142,7 @@ static void gef_sbc310_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
@@ -223,7 +223,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_sbc310, declare_of_platform_devices);
 
 define_machine(gef_sbc310) {
-	.name			= "GE Fanuc SBC310",
+	.name			= "GE SBC310",
 	.probe			= gef_sbc310_probe,
 	.setup_arch		= gef_sbc310_setup_arch,
 	.init_IRQ		= gef_sbc310_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index e10688a0fc4..5090d608d9e 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC610 board support
+ * GE SBC610 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc610_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -133,7 +133,7 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
 		('A' + gef_sbc610_get_board_rev() - 1));
@@ -212,7 +212,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_sbc610, declare_of_platform_devices);
 
 define_machine(gef_sbc610) {
-	.name			= "GE Fanuc SBC610",
+	.name			= "GE SBC610",
 	.probe			= gef_sbc610_probe,
 	.setup_arch		= gef_sbc610_setup_arch,
 	.init_IRQ		= gef_sbc610_init_irq,