aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/mm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-09-15 09:51:09 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-09-15 09:51:09 -0700
commit723e9db7a46e328527cc3da2b478b831184fe828 (patch)
treecdeda255633057dcb4c84097bed27b2bbf76970f /arch/powerpc/mm
parentada3fa15057205b7d3f727bba5cd26b5912e350f (diff)
parentd331d8305cba713605854aab63a000fb892353a7 (diff)
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits) powerpc/nvram: Enable use Generic NVRAM driver for different size chips powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline powerpc/ps3: Workaround for flash memory I/O error powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead powerpc/perf_counters: Reduce stack usage of power_check_constraints powerpc: Fix bug where perf_counters breaks oprofile powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops powerpc/irq: Improve nanodoc powerpc: Fix some late PowerMac G5 with PCIe ATI graphics powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT powerpc/book3e: Add missing page sizes powerpc/pseries: Fix to handle slb resize across migration powerpc/powermac: Thermal control turns system off too eagerly powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() powerpc/405ex: support cuImage via included dtb powerpc/405ex: provide necessary fixup function to support cuImage powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. powerpc/44x: Update Arches defconfig powerpc/44x: Update Arches dts ... Fix up conflicts in drivers/char/agp/uninorth-agp.c
Diffstat (limited to 'arch/powerpc/mm')
-rw-r--r--arch/powerpc/mm/40x_mmu.c4
-rw-r--r--arch/powerpc/mm/Makefile1
-rw-r--r--arch/powerpc/mm/fsl_booke_mmu.c2
-rw-r--r--arch/powerpc/mm/hash_low_32.S4
-rw-r--r--arch/powerpc/mm/hugetlbpage.c8
-rw-r--r--arch/powerpc/mm/init_32.c2
-rw-r--r--arch/powerpc/mm/init_64.c55
-rw-r--r--arch/powerpc/mm/mmu_context_nohash.c96
-rw-r--r--arch/powerpc/mm/mmu_decl.h37
-rw-r--r--arch/powerpc/mm/pgtable.c179
-rw-r--r--arch/powerpc/mm/pgtable_32.c2
-rw-r--r--arch/powerpc/mm/pgtable_64.c59
-rw-r--r--arch/powerpc/mm/slb.c46
-rw-r--r--arch/powerpc/mm/tlb_hash32.c3
-rw-r--r--arch/powerpc/mm/tlb_hash64.c20
-rw-r--r--arch/powerpc/mm/tlb_low_64e.S770
-rw-r--r--arch/powerpc/mm/tlb_nohash.c268
-rw-r--r--arch/powerpc/mm/tlb_nohash_low.S87
18 files changed, 1486 insertions, 157 deletions
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 29954dc2894..f5e7b9ce63d 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -105,7 +105,7 @@ unsigned long __init mmu_mapin_ram(void)
while (s >= LARGE_PAGE_SIZE_16M) {
pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+ unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE;
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
pmd_val(*pmdp++) = val;
@@ -120,7 +120,7 @@ unsigned long __init mmu_mapin_ram(void)
while (s >= LARGE_PAGE_SIZE_4M) {
pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+ unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE;
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
pmd_val(*pmdp) = val;
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 3e68363405b..6fb8fc8d2fe 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -13,6 +13,7 @@ obj-y := fault.o mem.o pgtable.o gup.o \
pgtable_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
tlb_nohash_low.o
+obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(CONFIG_WORD_SIZE)e.o
obj-$(CONFIG_PPC64) += mmap_64.o
hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index bb3d65998e6..dc93e95b256 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -161,7 +161,7 @@ unsigned long __init mmu_mapin_ram(void)
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
- while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) {
+ while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
virt += cam[tlbcam_index];
phys += cam[tlbcam_index];
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 14af8cedab7..b13d58932bf 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -40,7 +40,7 @@ mmu_hash_lock:
* The address is in r4, and r3 contains an access flag:
* _PAGE_RW (0x400) if a write.
* r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
+ * SPRG_THREAD contains the physical address of the current task's thread.
*
* Returns to the caller if the access is illegal or there is no
* mapping for the address. Otherwise it places an appropriate PTE
@@ -68,7 +68,7 @@ _GLOBAL(hash_page)
/* Get PTE (linux-style) and check access */
lis r0,KERNELBASE@h /* check if kernel address */
cmplw 0,r4,r0
- mfspr r8,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r8,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
lwz r5,PGDIR(r8) /* virt page-table root */
blt+ 112f /* assume user more likely */
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index c46ef2ffa3d..90df6ffe3a4 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -57,8 +57,10 @@ unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
#define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize])
static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
- "unused_4K", "hugepte_cache_64K", "unused_64K_AP",
- "hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+ [MMU_PAGE_64K] = "hugepte_cache_64K",
+ [MMU_PAGE_1M] = "hugepte_cache_1M",
+ [MMU_PAGE_16M] = "hugepte_cache_16M",
+ [MMU_PAGE_16G] = "hugepte_cache_16G",
};
/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
@@ -700,6 +702,8 @@ static void __init set_huge_psize(int psize)
if (mmu_huge_psizes[psize] ||
mmu_psize_defs[psize].shift == PAGE_SHIFT)
return;
+ if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL))
+ return;
hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
switch (mmu_psize_defs[psize].shift) {
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 3de6a0d9382..3ef5084b90c 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -54,8 +54,6 @@
#endif
#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
phys_addr_t total_memory;
phys_addr_t total_lowmem;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 68a821add28..31582329cd6 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -205,6 +205,47 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
return 0;
}
+/* On hash-based CPUs, the vmemmap is bolted in the hash table.
+ *
+ * On Book3E CPUs, the vmemmap is currently mapped in the top half of
+ * the vmalloc space using normal page tables, though the size of
+ * pages encoded in the PTEs can be different
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+static void __meminit vmemmap_create_mapping(unsigned long start,
+ unsigned long page_size,
+ unsigned long phys)
+{
+ /* Create a PTE encoding without page size */
+ unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED |
+ _PAGE_KERNEL_RW;
+
+ /* PTEs only contain page size encodings up to 32M */
+ BUG_ON(mmu_psize_defs[mmu_vmemmap_psize].enc > 0xf);
+
+ /* Encode the size in the PTE */
+ flags |= mmu_psize_defs[mmu_vmemmap_psize].enc << 8;
+
+ /* For each PTE for that area, map things. Note that we don't
+ * increment phys because all PTEs are of the large size and
+ * thus must have the low bits clear
+ */
+ for (i = 0; i < page_size; i += PAGE_SIZE)
+ BUG_ON(map_kernel_page(start + i, phys, flags));
+}
+#else /* CONFIG_PPC_BOOK3E */
+static void __meminit vmemmap_create_mapping(unsigned long start,
+ unsigned long page_size,
+ unsigned long phys)
+{
+ int mapped = htab_bolt_mapping(start, start + page_size, phys,
+ PAGE_KERNEL, mmu_vmemmap_psize,
+ mmu_kernel_ssize);
+ BUG_ON(mapped < 0);
+}
+#endif /* CONFIG_PPC_BOOK3E */
+
int __meminit vmemmap_populate(struct page *start_page,
unsigned long nr_pages, int node)
{
@@ -215,8 +256,11 @@ int __meminit vmemmap_populate(struct page *start_page,
/* Align to the page size of the linear mapping. */
start = _ALIGN_DOWN(start, page_size);
+ pr_debug("vmemmap_populate page %p, %ld pages, node %d\n",
+ start_page, nr_pages, node);
+ pr_debug(" -> map %lx..%lx\n", start, end);
+
for (; start < end; start += page_size) {
- int mapped;
void *p;
if (vmemmap_populated(start, page_size))
@@ -226,13 +270,10 @@ int __meminit vmemmap_populate(struct page *start_page,
if (!p)
return -ENOMEM;
- pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
- start, p, __pa(p));
+ pr_debug(" * %016lx..%016lx allocated at %p\n",
+ start, start + page_size, p);
- mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
- pgprot_val(PAGE_KERNEL),
- mmu_vmemmap_psize, mmu_kernel_ssize);
- BUG_ON(mapped < 0);
+ vmemmap_create_mapping(start, page_size, __pa(p));
}
return 0;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index b1a727def15..c2f93dc470e 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -25,10 +25,20 @@
* also clear mm->cpu_vm_mask bits when processes are migrated
*/
-#undef DEBUG
-#define DEBUG_STEAL_ONLY
-#undef DEBUG_MAP_CONSISTENCY
-/*#define DEBUG_CLAMP_LAST_CONTEXT 15 */
+#define DEBUG_MAP_CONSISTENCY
+#define DEBUG_CLAMP_LAST_CONTEXT 31
+//#define DEBUG_HARDER
+
+/* We don't use DEBUG because it tends to be compiled in always nowadays
+ * and this would generate way too much output
+ */
+#ifdef DEBUG_HARDER
+#define pr_hard(args...) printk(KERN_DEBUG args)
+#define pr_hardcont(args...) printk(KERN_CONT args)
+#else
+#define pr_hard(args...) do { } while(0)
+#define pr_hardcont(args...) do { } while(0)
+#endif
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -71,7 +81,7 @@ static DEFINE_SPINLOCK(context_lock);
static unsigned int steal_context_smp(unsigned int id)
{
struct mm_struct *mm;
- unsigned int cpu, max;
+ unsigned int cpu, max, i;
max = last_context - first_context;
@@ -89,15 +99,22 @@ static unsigned int steal_context_smp(unsigned int id)
id = first_context;
continue;
}
- pr_devel("[%d] steal context %d from mm @%p\n",
- smp_processor_id(), id, mm);
+ pr_hardcont(" | steal %d from 0x%p", id, mm);
/* Mark this mm has having no context anymore */
mm->context.id = MMU_NO_CONTEXT;
- /* Mark it stale on all CPUs that used this mm */
- for_each_cpu(cpu, mm_cpumask(mm))
- __set_bit(id, stale_map[cpu]);
+ /* Mark it stale on all CPUs that used this mm. For threaded
+ * implementations, we set it on all threads on each core
+ * represented in the mask. A future implementation will use
+ * a core map instead but this will do for now.
+ */
+ for_each_cpu(cpu, mm_cpumask(mm)) {
+ for (i = cpu_first_thread_in_core(cpu);
+ i <= cpu_last_thread_in_core(cpu); i++)
+ __set_bit(id, stale_map[i]);
+ cpu = i - 1;
+ }
return id;
}
@@ -126,7 +143,7 @@ static unsigned int steal_context_up(unsigned int id)
/* Pick up the victim mm */
mm = context_mm[id];
- pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+ pr_hardcont(" | steal %d from 0x%p", id, mm);
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
@@ -173,25 +190,20 @@ static void context_check_map(void) { }
void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
{
- unsigned int id, cpu = smp_processor_id();
+ unsigned int i, id, cpu = smp_processor_id();
unsigned long *map;
/* No lockless fast path .. yet */
spin_lock(&context_lock);
-#ifndef DEBUG_STEAL_ONLY
- pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
- cpu, next, next->context.active, next->context.id);
-#endif
+ pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
+ cpu, next, next->context.active, next->context.id);
#ifdef CONFIG_SMP
/* Mark us active and the previous one not anymore */
next->context.active++;
if (prev) {
-#ifndef DEBUG_STEAL_ONLY
- pr_devel(" old context %p active was: %d\n",
- prev, prev->context.active);
-#endif
+ pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active);
WARN_ON(prev->context.active < 1);
prev->context.active--;
}
@@ -201,8 +213,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
/* If we already have a valid assigned context, skip all that */
id = next->context.id;
- if (likely(id != MMU_NO_CONTEXT))
+ if (likely(id != MMU_NO_CONTEXT)) {
+#ifdef DEBUG_MAP_CONSISTENCY
+ if (context_mm[id] != next)
+ pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n",
+ next, id, id, context_mm[id]);
+#endif
goto ctxt_ok;
+ }
/* We really don't have a context, let's try to acquire one */
id = next_context;
@@ -235,11 +253,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
next_context = id + 1;
context_mm[id] = next;
next->context.id = id;
-
-#ifndef DEBUG_STEAL_ONLY
- pr_devel("[%d] picked up new id %d, nrf is now %d\n",
- cpu, id, nr_free_contexts);
-#endif
+ pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts);
context_check_map();
ctxt_ok:
@@ -248,15 +262,21 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
* local TLB for it and unmark it before we use it
*/
if (test_bit(id, stale_map[cpu])) {
- pr_devel("[%d] flushing stale context %d for mm @%p !\n",
- cpu, id, next);
+ pr_hardcont(" | stale flush %d [%d..%d]",
+ id, cpu_first_thread_in_core(cpu),
+ cpu_last_thread_in_core(cpu));
+
local_flush_tlb_mm(next);
/* XXX This clear should ultimately be part of local_flush_tlb_mm */
- __clear_bit(id, stale_map[cpu]);
+ for (i = cpu_first_thread_in_core(cpu);
+ i <= cpu_last_thread_in_core(cpu); i++) {
+ __clear_bit(id, stale_map[i]);
+ }
}
/* Flick the MMU and release lock */
+ pr_hardcont(" -> %d\n", id);
set_context(id, next->pgd);
spin_unlock(&context_lock);
}
@@ -266,6 +286,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
*/
int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
+ pr_hard("initing context for mm @%p\n", mm);
+
mm->context.id = MMU_NO_CONTEXT;
mm->context.active = 0;
@@ -305,7 +327,9 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned int)(long)hcpu;
-
+#ifdef CONFIG_HOTPLUG_CPU
+ struct task_struct *p;
+#endif
/* We don't touch CPU 0 map, it's allocated at aboot and kept
* around forever
*/
@@ -324,8 +348,16 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
kfree(stale_map[cpu]);
stale_map[cpu] = NULL;
- break;
-#endif
+
+ /* We also clear the cpu_vm_mask bits of CPUs going away */
+ read_lock(&tasklist_lock);
+ for_each_process(p) {
+ if (p->mm)
+ cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm));
+ }
+ read_unlock(&tasklist_lock);
+ break;
+#endif /* CONFIG_HOTPLUG_CPU */
}
return NOTIFY_OK;
}
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d1f9c62dc17..d2e5321d5ea 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -36,21 +36,37 @@ static inline void _tlbil_pid(unsigned int pid)
{
asm volatile ("sync; tlbia; isync" : : : "memory");
}
+#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
+
#else /* CONFIG_40x || CONFIG_8xx */
extern void _tlbil_all(void);
extern void _tlbil_pid(unsigned int pid);
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbil_pid_noind(unsigned int pid);
+#else
+#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
+#endif
#endif /* !(CONFIG_40x || CONFIG_8xx) */
/*
* On 8xx, we directly inline tlbie, on others, it's extern
*/
#ifdef CONFIG_8xx
-static inline void _tlbil_va(unsigned long address, unsigned int pid)
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind)
{
asm volatile ("tlbie %0; sync" : : "r" (address) : "memory");
}
-#else /* CONFIG_8xx */
-extern void _tlbil_va(unsigned long address, unsigned int pid);
+#elif defined(CONFIG_PPC_BOOK3E)
+extern void _tlbil_va(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind);
+#else
+extern void __tlbil_va(unsigned long address, unsigned int pid);
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind)
+{
+ __tlbil_va(address, pid);
+}
#endif /* CONIFG_8xx */
/*
@@ -58,10 +74,16 @@ extern void _tlbil_va(unsigned long address, unsigned int pid);
* implementation. When that becomes the case, this will be
* an extern.
*/
-static inline void _tlbivax_bcast(unsigned long address, unsigned int pid)
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind);
+#else
+static inline void _tlbivax_bcast(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind)
{
BUG();
}
+#endif
#else /* CONFIG_PPC_MMU_NOHASH */
@@ -99,7 +121,12 @@ extern unsigned int rtas_data, rtas_size;
struct hash_pte;
extern struct hash_pte *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
-#endif
+
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags);
+#endif /* CONFIG_PPC64 */
extern unsigned long ioremap_bot;
extern unsigned long __max_low_memory;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 627767d6169..83f1551ec2c 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,16 @@
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+#ifdef CONFIG_SMP
+
+/*
+ * Handle batching of page table freeing on SMP. Page tables are
+ * queued up and send to be freed later by RCU in order to avoid
+ * freeing a page table page that is being walked without locks
+ */
+
static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
static unsigned long pte_freelist_forced_free;
@@ -116,27 +126,7 @@ void pte_free_finish(void)
*batchp = NULL;
}
-/*
- * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
- */
-static pte_t do_dcache_icache_coherency(pte_t pte)
-{
- unsigned long pfn = pte_pfn(pte);
- struct page *page;
-
- if (unlikely(!pfn_valid(pfn)))
- return pte;
- page = pfn_to_page(pfn);
-
- if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
- pr_devel("do_dcache_icache_coherency... flushing\n");
- flush_dcache_icache_page(page);
- set_bit(PG_arch_1, &page->flags);
- }
- else
- pr_devel("do_dcache_icache_coherency... already clean\n");
- return __pte(pte_val(pte) | _PAGE_HWEXEC);
-}
+#endif /* CONFIG_SMP */
static inline int is_exec_fault(void)
{
@@ -145,49 +135,139 @@ static inline int is_exec_fault(void)
/* We only try to do i/d cache coherency on stuff that looks like
* reasonably "normal" PTEs. We currently require a PTE to be present
- * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE
+ * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE. We also only do that
+ * on userspace PTEs
*/
static inline int pte_looks_normal(pte_t pte)
{
return (pte_val(pte) &
- (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) ==
- (_PAGE_PRESENT);
+ (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE | _PAGE_USER)) ==
+ (_PAGE_PRESENT | _PAGE_USER);
}
-#if defined(CONFIG_PPC_STD_MMU)
+struct page * maybe_pte_to_page(pte_t pte)
+{
+ unsigned long pfn = pte_pfn(pte);
+ struct page *page;
+
+ if (unlikely(!pfn_valid(pfn)))
+ return NULL;
+ page = pfn_to_page(pfn);
+ if (PageReserved(page))
+ return NULL;
+ return page;
+}
+
+#if defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0
+
/* Server-style MMU handles coherency when hashing if HW exec permission
- * is supposed per page (currently 64-bit only). Else, we always flush
- * valid PTEs in set_pte.
+ * is supposed per page (currently 64-bit only). If not, then, we always
+ * flush the cache for valid PTEs in set_pte. Embedded CPU without HW exec
+ * support falls into the same category.
*/
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_pte_filter(pte_t pte)
{
- return set_pte && pte_looks_normal(pte) &&
- !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
- cpu_has_feature(CPU_FTR_NOEXECUTE));
+ pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+ if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
+ cpu_has_feature(CPU_FTR_NOEXECUTE))) {
+ struct page *pg = maybe_pte_to_page(pte);
+ if (!pg)
+ return pte;
+ if (!test_bit(PG_arch_1, &pg->flags)) {
+ flush_dcache_icache_page(pg);
+ set_bit(PG_arch_1, &pg->flags);
+ }
+ }
+ return pte;
}
-#elif _PAGE_HWEXEC == 0
-/* Embedded type MMU without HW exec support (8xx only so far), we flush
- * the cache for any present PTE
- */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+ int dirty)
{
- return set_pte && pte_looks_normal(pte);
+ return pte;
}
-#else
-/* Other embedded CPUs with HW exec support per-page, we flush on exec
- * fault if HWEXEC is not set
+
+#else /* defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 */
+
+/* Embedded type MMU with HW exec support. This is a bit more complicated
+ * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
+ * instead we "filter out" the exec permission for non clean pages.
*/
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+static pte_t set_pte_filter(pte_t pte)
{
- return pte_looks_normal(pte) && is_exec_fault() &&
- !(pte_val(pte) & _PAGE_HWEXEC);
+ struct page *pg;
+
+ /* No exec permission in the first place, move on */
+ if (!(pte_val(pte) & _PAGE_EXEC) || !pte_looks_normal(pte))
+ return pte;
+
+ /* If you set _PAGE_EXEC on weird pages you're on your own */
+ pg = maybe_pte_to_page(pte);
+ if (unlikely(!pg))
+ return pte;
+
+ /* If the page clean, we move on */
+ if (test_bit(PG_arch_1, &pg->flags))
+ return pte;
+
+ /* If it's an exec fault, we flush the cache and make it clean */
+ if (is_exec_fault()) {
+ flush_dcache_icache_page(pg);
+ set_bit(PG_arch_1, &pg->flags);
+ return pte;
+ }
+
+ /* Else, we filter out _PAGE_EXEC */
+ return __pte(pte_val(pte) & ~_PAGE_EXEC);
}
-#endif
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+ int dirty)
+{
+ struct page *pg;
+
+ /* So here, we only care about exec faults, as we use them
+ * to recover lost _PAGE_EXEC and perform I$/D$ coherency
+ * if necessary. Also if _PAGE_EXEC is already set, same deal,
+ * we just bail out
+ */
+ if (dirty || (pte_val(pte) & _PAGE_EXEC) || !is_exec_fault())
+ return pte;
+
+#ifdef CONFIG_DEBUG_VM
+ /* So this is an exec fault, _PAGE_EXEC is not set. If it was
+ * an error we would have bailed out earlier in do_page_fault()
+ * but let's make sure of it
+ */
+ if (WARN_ON(!(vma->vm_flags & VM_EXEC)))
+ return pte;
+#endif /* CONFIG_DEBUG_VM */
+
+ /* If you set _PAGE_EXEC on weird pages you're on your own */
+ pg = maybe_pte_to_page(pte);
+ if (unlikely(!pg))
+ goto bail;
+
+ /* If the page is already clean, we move on */
+ if (test_bit(PG_arch_1, &pg->flags))
+ goto bail;
+
+ /* Clean the page and set PG_arch_1 */
+ flush_dcache_icache_page(pg);
+ set_bit(PG_arch_1, &pg->flags);
+
+ bail:
+ return __pte(pte_val(pte) | _PAGE_EXEC);
+}
+
+#endif /* !(defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0) */
/*
* set_pte stores a linux PTE into the linux page table.
*/
-void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+ pte_t pte)
{
#ifdef CONFIG_DEBUG_VM
WARN_ON(pte_present(*ptep));
@@ -196,9 +276,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte
* this context might not have been activated yet when this
* is called.
*/
- pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
- if (pte_need_exec_flush(pte, 1))
- pte = do_dcache_icache_coherency(pte);
+ pte = set_pte_filter(pte);
/* Perform the setting of the PTE */
__set_pte_at(mm, addr, ptep, pte, 0);
@@ -215,8 +293,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
pte_t *ptep, pte_t entry, int dirty)
{
int changed;
- if (!dirty && pte_need_exec_flush(entry, 0))
- entry = do_dcache_icache_coherency(entry);
+ entry = set_access_flags_filter(entry, vma, dirty);
changed = !pte_same(*(ptep), entry);
if (changed) {
if (!(vma->vm_flags & VM_HUGETLB))
@@ -242,7 +319,7 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
BUG_ON(pud_none(*pud));
pmd = pmd_offset(pud, addr);
BUG_ON(!pmd_present(*pmd));
- BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd)));
+ assert_spin_locked(pte_lockptr(mm, pmd));
}
#endif /* CONFIG_DEBUG_VM */
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 5422169626b..cb96cb2e17c 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -142,7 +142,7 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
- flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+ flags &= ~(_PAGE_USER | _PAGE_EXEC);
return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index bfa7db6b2fd..853d5565eed 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -33,6 +33,8 @@
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
@@ -55,19 +57,36 @@
unsigned long ioremap_bot = IOREMAP_BASE;
+
+#ifdef CONFIG_PPC_MMU_NOHASH
+static void *early_alloc_pgtable(unsigned long size)
+{
+ void *pt;
+
+ if (init_bootmem_done)
+ pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
+ else
+ pt = __va(lmb_alloc_base(size, size,
+ __pa(MAX_DMA_ADDRESS)));
+ memset(pt, 0, size);
+
+ return pt;
+}
+#endif /* CONFIG_PPC_MMU_NOHASH */
+
/*
- * map_io_page currently only called by __ioremap
- * map_io_page adds an entry to the ioremap page table
+ * map_kernel_page currently only called by __ioremap
+ * map_kernel_page adds an entry to the ioremap page table
* and adds an entry to the HPT, possibly bolting it
*/
-static int map_io_page(unsigned long ea, unsigned long pa, int flags)
+int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
{
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
- if (mem_init_done) {
+ if (slab_is_available()) {
pgdp = pgd_offset_k(ea);
pudp = pud_alloc(&init_mm, pgdp, ea);
if (!pudp)
@@ -81,6 +100,35 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
} else {
+#ifdef CONFIG_PPC_MMU_NOHASH
+ /* Warning ! This will blow up if bootmem is not initialized
+ * which our ppc64 code is keen to do that, we'll need to
+ * fix it and/or be more careful
+ */
+ pgdp = pgd_offset_k(ea);
+#ifdef PUD_TABLE_SIZE
+ if (pgd_none(*pgdp)) {
+ pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
+ BUG_ON(pudp == NULL);
+ pgd_populate(&init_mm, pgdp, pudp);
+ }
+#endif /* PUD_TABLE_SIZE */
+ pudp = pud_offset(pgdp, ea);
+ if (pud_none(*pudp)) {
+ pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
+ BUG_ON(pmdp == NULL);
+ pud_populate(&init_mm, pudp, pmdp);
+ }
+ pmdp = pmd_offset(pudp, ea);
+ if (!pmd_present(*pmdp)) {
+ ptep = early_alloc_pgtable(PAGE_SIZE);
+ BUG_ON(ptep == NULL);
+ pmd_populate_kernel(&init_mm, pmdp, ptep);
+ }
+ ptep = pte_offset_kernel(pmdp, ea);
+ set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
+ __pgprot(flags)));
+#else /* CONFIG_PPC_MMU_NOHASH */
/*
* If the mm subsystem is not fully up, we cannot create a
* linux page table entry for this mapping. Simply bolt an
@@ -93,6 +141,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
"memory at %016lx !\n", pa);
return -ENOMEM;
}
+#endif /* !CONFIG_PPC_MMU_NOHASH */
}
return 0;
}
@@ -124,7 +173,7 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
WARN_ON(size & ~PAGE_MASK);
for (i = 0; i < size; i += PAGE_SIZE)
- if (map_io_page((unsigned long)ea+i, pa+i, flags))
+ if (map_kernel_page((unsigned long)ea+i, pa+i, flags))
return NULL;
return (void __iomem *)ea;
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index a685652effe..1d98ecc8eec 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -191,7 +191,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
unsigned long slbie_data = 0;
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
- unsigned long unmapped_base;
+ unsigned long exec_base;
/*
* We need interrupts hard-disabled here, not just soft-disabled,
@@ -227,42 +227,44 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
/*
* preload some userspace segments into the SLB.
+ * Almost all 32 and 64bit PowerPC executables are linked at
+ * 0x10000000 so it makes sense to preload this segment.
*/
- if (test_tsk_thread_flag(tsk, TIF_32BIT))
- unmapped_base = TASK_UNMAPPED_BASE_USER32;
- else
- unmapped_base = TASK_UNMAPPED_BASE_USER64;
+ exec_base = 0x10000000;
- if (is_kernel_addr(pc))
- return;
- slb_allocate(pc);
-
- if (esids_match(pc,stack))
+ if (is_kernel_addr(pc) || is_kernel_addr(stack) ||
+ is_kernel_addr(exec_base))
return;
- if (is_kernel_addr(stack))
- return;
- slb_allocate(stack);
+ slb_allocate(pc);
- if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base))
- return;
+ if (!esids_match(pc, stack))
+ slb_allocate(stack);
- if (is_kernel_addr(unmapped_base))
- return;
- slb_allocate(unmapped_base);
+ if (!esids_match(pc, exec_base) &&
+ !esids_match(stack, exec_base))
+ slb_allocate(exec_base);
}
static inline void patch_slb_encoding(unsigned int *insn_addr,
unsigned int immed)
{
- /* Assume the instruction had a "0" immediate value, just
- * "or" in the new value
- */
- *insn_addr |= immed;
+ *insn_addr = (*insn_addr & 0xffff0000) | immed;
flush_icache_range((unsigned long)insn_addr, 4+
(unsigned long)insn_addr);
}
+void slb_set_size(u16 size)
+{
+ extern unsigned int *slb_compare_rr_to_size;
+
+ if (mmu_slb_size == size)
+ return;
+
+ mmu_slb_size = size;
+ patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size);
+}
+
void slb_initialize(void)
{
unsigned long linear_llp, vmalloc_llp, io_llp;
diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c
index 65190587a36..8aaa8b7eb32 100644
--- a/arch/powerpc/mm/tlb_hash32.c
+++ b/arch/powerpc/mm/tlb_hash32.c
@@ -71,6 +71,9 @@ void tlb_flush(struct mmu_gather *tlb)
*/
_tlbia();
}
+
+ /* Push out batch of freed page tables */
+ pte_free_finish();
}
/*
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 937eb90677d..2b2f35f6985 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -33,11 +33,6 @@
DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
-/* This is declared as we are using the more or less generic
- * arch/powerpc/include/asm/tlb.h file -- tgall
- */
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
/*
* A linux PTE was changed and the corresponding hash table entry
* neesd to be flushed. This function will either perform the flush
@@ -154,6 +149,21 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
batch->index = 0;
}
+void tlb_flush(struct mmu_gather *tlb)
+{
+ struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
+
+ /* If there's a TLB batch pending, then we must flush it because the
+ * pages are going to be freed and we really don't want to have a CPU
+ * access a freed page because it has a stale TLB
+ */
+ if (tlbbatch->index)
+ __flush_tlb_pending(tlbbatch);
+
+ /* Push out batch of freed page tables */
+ pte_free_finish();
+}
+
/**
* __flush_hash_table_range - Flush all HPTEs for a given address range
* from the hash table (and the TLB). But keeps
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
new file mode 100644
index 00000000000..ef1cccf7117
--- /dev/null
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -0,0 +1,770 @@
+/*
+ * Low leve TLB miss handlers for Book3E
+ *
+ * Copyright (C) 2008-2009
+ * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/processor.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/pgtable.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/ppc-opcode.h>
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE+1)
+#else
+#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE)
+#endif
+#define VPTE_PUD_SHIFT (VPTE_PMD_SHIFT + PMD_INDEX_SIZE)
+#define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE)
+#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE)
+
+
+/**********************************************************************
+ * *
+ * TLB miss handling for Book3E with TLB reservation and HES support *
+ * *
+ **********************************************************************/
+
+
+/* Data TLB miss */
+ START_EXCEPTION(data_tlb_miss)
+ TLB_MISS_PROLOG
+
+ /* Now we handle the fault proper. We only save DEAR in normal
+ * fault case since that's the only interesting values here.
+ * We could probably also optimize by not saving SRR0/1 in the
+ * linear mapping case but I'll leave that for later
+ */
+ mfspr r14,SPRN_ESR
+ mfspr r16,SPRN_DEAR /* get faulting address */
+ srdi r15,r16,60 /* get region */
+ cmpldi cr0,r15,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* The page tables are mapped virtually linear. At this point, though,
+ * we don't know whether we are trying to fault in a first level
+ * virtual address or a virtual page table address. We can get that
+ * from bit 0x1 of the region ID which we have set for a page table
+ */
+ andi. r10,r15,0x1
+ bne- virt_page_table_tlb_miss
+
+ std r14,EX_TLB_ESR(r12); /* save ESR */
+ std r16,EX_TLB_DEAR(r12); /* save DEAR */
+
+ /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */
+ li r11,_PAGE_PRESENT
+ oris r11,r11,_PAGE_ACCESSED@h
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ cmpldi cr0,r15,0 /* Check for user region */
+
+ /* We pre-test some combination of permissions to avoid double
+ * faults:
+ *
+ * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
+ * ESR_ST is 0x00800000
+ * _PAGE_BAP_SW is 0x00000010
+ * So the shift is >> 19. This tests for supervisor writeability.
+ * If the page happens to be supervisor writeable and not user
+ * writeable, we will take a new fault later, but that should be
+ * a rare enough case.
+ *
+ * We also move ESR_ST in _PAGE_DIRTY position
+ * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
+ *
+ * MAS1 is preset for all we need except for TID that needs to
+ * be cleared for kernel translations
+ */
+ rlwimi r11,r14,32-19,27,27
+ rlwimi r11,r14,32-16,19,19
+ beq normal_tlb_miss
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r15,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ beq+ normal_tlb_miss
+
+ /* We got a crappy address, just fault with whatever DEAR and ESR
+ * are here
+ */
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+/* Instruction TLB miss */
+ START_EXCEPTION(instruction_tlb_miss)
+ TLB_MISS_PROLOG
+
+ /* If we take a recursive fault, the second level handler may need
+ * to know whether we are handling a data or instruction fault in
+ * order to get to the right store fault handler. We provide that
+ * info by writing a crazy value in ESR in our exception frame
+ */
+ li r14,-1 /* store to exception frame is done later */
+
+ /* Now we handle the fault proper. We only save DEAR in the non
+ * linear mapping case since we know the linear mapping case will
+ * not re-enter. We could indeed optimize and also not save SRR0/1
+ * in the linear mapping case but I'll leave that for later
+ *
+ * Faulting address is SRR0 which is already in r16
+ */
+ srdi r15,r16,60 /* get region */
+ cmpldi cr0,r15,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */
+ oris r11,r11,_PAGE_ACCESSED@h
+
+ cmpldi cr0,r15,0 /* Check for user region */
+ std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */
+ beq normal_tlb_miss
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r15,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ beq+ normal_tlb_miss
+
+ /* We got a crappy address, just fault */
+ TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+/*
+ * This is the guts of the first-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = faulting address
+ * r15 = region ID
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = PTE permission mask
+ * r10 = crap (free to use)
+ */
+normal_tlb_miss:
+ /* So we first construct the page table address. We do that by
+ * shifting the bottom of the address (not the region ID) by
+ * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and
+ * or'ing the fourth high bit.
+ *
+ * NOTE: For 64K pages, we do things slightly differently in
+ * order to handle the weird page table format used by linux
+ */
+ ori r10,r15,0x1
+#ifdef CONFIG_PPC_64K_PAGES
+ /* For the top bits, 16 bytes per PTE */
+ rldicl r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4
+ /* Now create the bottom bits as 0 in position 0x8000 and
+ * the rest calculated for 8 bytes per PTE
+ */
+ rldicl r15,r16,64-(PAGE_SHIFT-3),64-15
+ /* Insert the bottom bits in */
+ rlwimi r14,r15,0,16,31
+#else
+ rldicl r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4
+#endif
+ sldi r15,r10,60
+ clrrdi r14,r14,3
+ or r10,r15,r14
+
+BEGIN_MMU_FTR_SECTION
+ /* Set the TLB reservation and seach for existing entry. Then load
+ * the entry.
+ */
+ PPC_TLBSRX_DOT(0,r16)
+ ld r14,0(r10)
+ beq normal_tlb_miss_done
+MMU_FTR_SECTION_ELSE
+ ld r14,0(r10)
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
+
+finish_normal_tlb_miss:
+ /* Check if required permissions are met */
+ andc. r15,r11,r14
+ bne- normal_tlb_miss_access_fault
+
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE need change if !base page size, not
+ * yet implemented for now
+ * MAS 2 : Defaults not useful, need to be redone
+ * MAS 3+7 : Needs to be done
+ *
+ * TODO: mix up code below for better scheduling
+ */
+ clrrdi r11,r16,12 /* Clear low crap in EA */
+ rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */
+ mtspr SPRN_MAS2,r11
+
+ /* Check page size, if not standard, update MAS1 */
+ rldicl r11,r14,64-8,64-8
+#ifdef CONFIG_PPC_64K_PAGES
+ cmpldi cr0,r11,BOOK3E_PAGESZ_64K
+#else
+ cmpldi cr0,r11,BOOK3E_PAGESZ_4K
+#endif
+ beq- 1f
+ mfspr r11,SPRN_MAS1
+ rlwimi r11,r14,31,21,24
+ rlwinm r11,r11,0,21,19
+ mtspr SPRN_MAS1,r11
+1:
+ /* Move RPN in position */
+ rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+ clrldi r15,r11,12 /* Clear crap at the top */
+ rlwimi r15,r14,32-8,22,25 /* Move in U bits */
+ rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
+
+ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+ andi. r11,r14,_PAGE_DIRTY
+ bne 1f
+ li r11,MAS3_SW|MAS3_UW
+ andc r15,r15,r11
+1:
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r15,32
+ mtspr SPRN_MAS3,r15
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r15
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+normal_tlb_miss_done:
+ /* We don't bother with restoring DEAR or ESR since we know we are
+ * level 0 and just going back to userland. They are only needed
+ * if you are going to take an access fault
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+normal_tlb_miss_access_fault:
+ /* We need to check if it was an instruction miss */
+ andi. r10,r11,_PAGE_EXEC
+ bne 1f
+ ld r14,EX_TLB_DEAR(r12)
+ ld r15,EX_TLB_ESR(r12)
+ mtspr SPRN_DEAR,r14
+ mtspr SPRN_ESR,r15
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = region (top 4 bits of address)
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * Note that this should only ever be called as a second level handler
+ * with the current scheme when using SW load.
+ * That means we can always get the original fault DEAR at
+ * EX_TLB_DEAR-EX_TLB_SIZE(r12)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will restart the whole fault at level
+ * 0 so we don't care too much about clobbers
+ *
+ * XXX That code was written back when we couldn't clobber r14. We can now,
+ * so we could probably optimize things a bit
+ */
+virt_page_table_tlb_miss:
+ /* Are we hitting a kernel page table ? */
+ andi. r10,r15,0x8
+
+ /* The cool thing now is that r10 contains 0 for user and 8 for kernel,
+ * and we happen to have the swapper_pg_dir at offset 8 from the user
+ * pgdir in the PACA :-).
+ */
+ add r11,r10,r13
+
+ /* If kernel, we need to clear MAS1 TID */
+ beq 1f
+ /* XXX replace the RMW cycles with immediate loads + writes */
+ mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+1:
+BEGIN_MMU_FTR_SECTION
+ /* Search if we already have a TLB entry for that virtual address, and
+ * if we do, bail out.
+ */
+ PPC_TLBSRX_DOT(0,r16)
+ beq virt_page_table_tlb_miss_done
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl. r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4
+ bne- virt_page_table_tlb_miss_fault
+
+ /* Get the PGD pointer */
+ ld r15,PACAPGD(r11)
+ cmpldi cr0,r15,0
+ beq- virt_page_table_tlb_miss_fault
+
+ /* Get to PGD entry */
+ rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq virt_page_table_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+ /* Get to PUD entry */
+ rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq virt_page_table_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+ /* Get to PMD entry */
+ rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq virt_page_table_tlb_miss_fault
+
+ /* Ok, we're all right, we can now create a kernel translation for
+ * a 4K or 64K page from r16 -> r15.
+ */
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base page size always
+ * MAS 2 : Use defaults
+ * MAS 3+7 : Needs to be done
+ *
+ * So we only do MAS 2 and 3 for now...
+ */
+ clrldi r11,r15,4 /* remove region ID from RPN */
+ ori r10,r11,1 /* Or-in SR */
+
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+BEGIN_MMU_FTR_SECTION
+virt_page_table_tlb_miss_done:
+
+ /* We have overriden MAS2:EPN but currently our primary TLB miss
+ * handler will always restore it so that should not be an issue,
+ * if we ever optimize the primary handler to not write MAS2 on
+ * some cases, we'll have to restore MAS2:EPN here based on the
+ * original fault's DEAR. If we do that we have to modify the
+ * ITLB miss handler to also store SRR0 in the exception frame
+ * as DEAR.
+ *
+ * However, one nasty thing we did is we cleared the reservation
+ * (well, potentially we did). We do a trick here thus if we
+ * are not a level 0 exception (we interrupted the TLB miss) we
+ * offset the return address by -4 in order to replay the tlbsrx
+ * instruction there
+ */
+ subf r10,r13,r12
+ cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+ bne- 1f
+ ld r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+ addi r10,r11,-4
+ std r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+1:
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
+ /* Return to caller, normal case */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK);
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+virt_page_table_tlb_miss_fault:
+ /* If we fault here, things are a little bit tricky. We need to call
+ * either data or instruction store fault, and we need to retreive
+ * the original fault address and ESR (for data).
+ *
+ * The thing is, we know that in normal circumstances, this is
+ * always called as a second level tlb miss for SW load or as a first
+ * level TLB miss for HW load, so we should be able to peek at the
+ * relevant informations in the first exception frame in the PACA.
+ *
+ * However, we do need to double check that, because we may just hit
+ * a stray kernel pointer or a userland attack trying to hit those
+ * areas. If that is the case, we do a data fault. (We can't get here
+ * from an instruction tlb miss anyway).
+ *
+ * Note also that when going to a fault, we must unwind the previous
+ * level as well. Since we are doing that, we don't need to clear or
+ * restore the TLB reservation neither.
+ */
+ subf r10,r13,r12
+ cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+ bne- virt_page_table_tlb_miss_whacko_fault
+
+ /* We dig the original DEAR and ESR from slot 0 */
+ ld r15,EX_TLB_DEAR+PACA_EXTLB(r13)
+ ld r16,EX_TLB_ESR+PACA_EXTLB(r13)
+
+ /* We check for the "special" ESR value for instruction faults */
+ cmpdi cr0,r16,-1
+ beq 1f
+ mtspr SPRN_DEAR,r15
+ mtspr SPRN_ESR,r16
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT);
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT);
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+virt_page_table_tlb_miss_whacko_fault:
+ /* The linear fault will restart everything so ESR and DEAR will
+ * not have been clobbered, let's just fault with what we have
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT);
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+
+/**************************************************************
+ * *
+ * TLB miss handling for Book3E with hw page table support *
+ * *
+ **************************************************************/
+
+
+/* Data TLB miss */
+ START_EXCEPTION(data_tlb_miss_htw)
+ TLB_MISS_PROLOG
+
+ /* Now we handle the fault proper. We only save DEAR in normal
+ * fault case since that's the only interesting values here.
+ * We could probably also optimize by not saving SRR0/1 in the
+ * linear mapping case but I'll leave that for later
+ */
+ mfspr r14,SPRN_ESR
+ mfspr r16,SPRN_DEAR /* get faulting address */
+ srdi r11,r16,60 /* get region */
+ cmpldi cr0,r11,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ cmpldi cr0,r11,0 /* Check for user region */
+ ld r15,PACAPGD(r13) /* Load user pgdir */
+ beq htw_tlb_miss
+
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r11,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */
+ beq+ htw_tlb_miss
+
+ /* We got a crappy address, just fault with whatever DEAR and ESR
+ * are here
+ */
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+/* Instruction TLB miss */
+ START_EXCEPTION(instruction_tlb_miss_htw)
+ TLB_MISS_PROLOG
+
+ /* If we take a recursive fault, the second level handler may need
+ * to know whether we are handling a data or instruction fault in
+ * order to get to the right store fault handler. We provide that
+ * info by keeping a crazy value for ESR in r14
+ */
+ li r14,-1 /* store to exception frame is done later */
+
+ /* Now we handle the fault proper. We only save DEAR in the non
+ * linear mapping case since we know the linear mapping case will
+ * not re-enter. We could indeed optimize and also not save SRR0/1
+ * in the linear mapping case but I'll leave that for later
+ *
+ * Faulting address is SRR0 which is already in r16
+ */
+ srdi r11,r16,60 /* get region */
+ cmpldi cr0,r11,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ cmpldi cr0,r11,0 /* Check for user region */
+ ld r15,PACAPGD(r13) /* Load user pgdir */
+ beq htw_tlb_miss
+
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r11,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */
+ beq+ htw_tlb_miss
+
+ /* We got a crappy address, just fault */
+ TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = PGD pointer
+ * r14 = ESR
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will save/restore things for us
+ */
+htw_tlb_miss:
+ /* Search if we already have a TLB entry for that virtual address, and
+ * if we do, bail out.
+ *
+ * MAS1:IND should be already set based on MAS4
+ */
+ PPC_TLBSRX_DOT(0,r16)
+ beq htw_tlb_miss_done
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+ bne- htw_tlb_miss_fault
+
+ /* Get the PGD pointer */
+ cmpldi cr0,r15,0
+ beq- htw_tlb_miss_fault
+
+ /* Get to PGD entry */
+ rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq htw_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+ /* Get to PUD entry */
+ rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq htw_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+ /* Get to PMD entry */
+ rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq htw_tlb_miss_fault
+
+ /* Ok, we're all right, we can now create an indirect entry for
+ * a 1M or 256M page.
+ *
+ * The last trick is now that because we use "half" pages for
+ * the HTW (1M IND is 2K and 256M IND is 32K) we need to account
+ * for an added LSB bit to the RPN. For 64K pages, there is no
+ * problem as we already use 32K arrays (half PTE pages), but for
+ * 4K page we need to extract a bit from the virtual address and
+ * insert it into the "PA52" bit of the RPN.
+ */
+#ifndef CONFIG_PPC_64K_PAGES
+ rlwimi r15,r16,32-9,20,20
+#endif
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base ind page size always
+ * MAS 2 : Use defaults
+ * MAS 3+7 : Needs to be done
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+ ori r10,r15,(BOOK3E_PAGESZ_64K << MAS3_SPSIZE_SHIFT)
+#else
+ ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+#endif
+
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+htw_tlb_miss_done:
+ /* We don't bother with restoring DEAR or ESR since we know we are
+ * level 0 and just going back to userland. They are only needed
+ * if you are going to take an access fault
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK)
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+htw_tlb_miss_fault:
+ /* We need to check if it was an instruction miss. We know this
+ * though because r14 would contain -1
+ */
+ cmpdi cr0,r14,-1
+ beq 1f
+ mtspr SPRN_DEAR,r16
+ mtspr SPRN_ESR,r14
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+/*
+ * This is the guts of "any" level TLB miss handler for kernel linear
+ * mapping misses. We are entered with:
+ *
+ *
+ * r16 = faulting address
+ * r15 = crap (free to use)
+ * r14 = ESR (data) or -1 (instruction)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * In addition we know that we will not re-enter, so in theory, we could
+ * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later.
+ *
+ * We also need to be careful about MAS registers here & TLB reservation,
+ * as we know we'll have clobbered them if we interrupt the main TLB miss
+ * handlers in which case we probably want to do a full restart at level
+ * 0 rather than saving / restoring the MAS.
+ *
+ * Note: If we care about performance of that core, we can easily shuffle
+ * a few things around
+ */
+tlb_load_linear:
+ /* For now, we assume the linear mapping is contiguous and stops at
+ * linear_map_top. We also assume the size is a multiple of 1G, thus
+ * we only use 1G pages for now. That might have to be changed in a
+ * final implementation, especially when dealing with hypervisors
+ */
+ ld r11,PACATOC(r13)
+ ld r11,linear_map_top@got(r11)
+ ld r10,0(r11)
+ cmpld cr0,r10,r16
+ bge tlb_load_linear_fault
+
+ /* MAS1 need whole new setup. */
+ li r15,(BOOK3E_PAGESZ_1GB<<MAS1_TSIZE_SHIFT)
+ oris r15,r15,MAS1_VALID@h /* MAS1 needs V and TSIZE */
+ mtspr SPRN_MAS1,r15
+
+ /* Already somebody there ? */
+ PPC_TLBSRX_DOT(0,r16)
+ beq tlb_load_linear_done
+
+ /* Now we build the remaining MAS. MAS0 and 2 should be fine
+ * with their defaults, which leaves us with MAS 3 and 7. The
+ * mapping is linear, so we just take the address, clear the
+ * region bits, and or in the permission bits which are currently
+ * hard wired
+ */
+ clrrdi r10,r16,30 /* 1G page index */
+ clrldi r10,r10,4 /* clear region bits */
+ ori r10,r10,MAS3_SR|MAS3_SW|MAS3_SX
+
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+tlb_load_linear_done:
+ /* We use the "error" epilog for success as we do want to
+ * restore to the initial faulting context, whatever it was.
+ * We do that because we can't resume a fault within a TLB
+ * miss handler, due to MAS and TLB reservation being clobbered.
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_LINEAR)
+ TLB_MISS_EPILOG_ERROR
+ rfi
+
+tlb_load_linear_fault:
+ /* We keep the DEAR and ESR around, this shouldn't have happened */
+ cmpdi cr0,r14,-1
+ beq 1f
+ TLB_MISS_EPILOG_ERROR_SPECIAL
+ b exc_data_storage_book3e
+1: TLB_MISS_EPILOG_ERROR_SPECIAL
+ b exc_instruction_storage_book3e
+
+
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+.tlb_stat_inc:
+1: ldarx r8,0,r9
+ addi r8,r8,1
+ stdcx. r8,0,r9
+ bne- 1b
+ blr
+#endif
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index ad2eb4d34dd..2fbc680c2c7 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -7,8 +7,8 @@
*
* -- BenH
*
- * Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org>
- * IBM Corp.
+ * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org>
+ * IBM Corp.
*
* Derived from arch/ppc/mm/init.c:
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
@@ -34,12 +34,71 @@
#include <linux/pagemap.h>
#include <linux/preempt.h>
#include <linux/spinlock.h>
+#include <linux/lmb.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include <asm/code-patching.h>
#include "mmu_decl.h"
+#ifdef CONFIG_PPC_BOOK3E
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+ [MMU_PAGE_4K] = {
+ .shift = 12,
+ .enc = BOOK3E_PAGESZ_4K,
+ },
+ [MMU_PAGE_16K] = {
+ .shift = 14,
+ .enc = BOOK3E_PAGESZ_16K,
+ },
+ [MMU_PAGE_64K] = {
+ .shift = 16,
+ .enc = BOOK3E_PAGESZ_64K,
+ },
+ [MMU_PAGE_1M] = {
+ .shift = 20,
+ .enc = BOOK3E_PAGESZ_1M,
+ },
+ [MMU_PAGE_16M] = {
+ .shift = 24,
+ .enc = BOOK3E_PAGESZ_16M,
+ },
+ [MMU_PAGE_256M] = {
+ .shift = 28,
+ .enc = BOOK3E_PAGESZ_256M,
+ },
+ [MMU_PAGE_1G] = {
+ .shift = 30,
+ .enc = BOOK3E_PAGESZ_1GB,
+ },
+};
+static inline int mmu_get_tsize(int psize)
+{
+ return mmu_psize_defs[psize].enc;
+}
+#else
+static inline int mmu_get_tsize(int psize)
+{
+ /* This isn't used on !Book3E for now */
+ return 0;
+}
+#endif
+
+/* The variables below are currently only used on 64-bit Book3E
+ * though this will probably be made common with other nohash
+ * implementations at some point
+ */
+#ifdef CONFIG_PPC64
+
+int mmu_linear_psize; /* Page size used for the linear mapping */
+int mmu_pte_psize; /* Page size used for PTE pages */
+int mmu_vmemmap_psize; /* Page size used for the virtual mem map */
+int book3e_htw_enabled; /* Is HW tablewalk enabled ? */
+unsigned long linear_map_top; /* Top of linear mapping */
+
+#endif /* CONFIG_PPC64 */
+
/*
* Base TLB flushing operations:
*
@@ -67,18 +126,24 @@ void local_flush_tlb_mm(struct mm_struct *mm)
}
EXPORT_SYMBOL(local_flush_tlb_mm);
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind)
{
unsigned int pid;
preempt_disable();
- pid = vma ? vma->vm_mm->context.id : 0;
+ pid = mm ? mm->context.id : 0;
if (pid != MMU_NO_CONTEXT)
- _tlbil_va(vmaddr, pid);
+ _tlbil_va(vmaddr, pid, tsize, ind);
preempt_enable();
}
-EXPORT_SYMBOL(local_flush_tlb_page);
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ __local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+ mmu_get_tsize(mmu_virtual_psize), 0);
+}
+EXPORT_SYMBOL(local_flush_tlb_page);
/*
* And here are the SMP non-local implementations
@@ -87,9 +152,17 @@ EXPORT_SYMBOL(local_flush_tlb_page);
static DEFINE_SPINLOCK(tlbivax_lock);
+static int mm_is_core_local(struct mm_struct *mm)
+{
+ return cpumask_subset(mm_cpumask(mm),
+ topology_thread_cpumask(smp_processor_id()));
+}
+
struct tlb_flush_param {
unsigned long addr;
unsigned int pid;
+ unsigned int tsize;
+ unsigned int ind;
};
static void do_flush_tlb_mm_ipi(void *param)
@@ -103,7 +176,7 @@ static void do_flush_tlb_page_ipi(void *param)
{
struct tlb_flush_param *p = param;
- _tlbil_va(p->addr, p->pid);
+ _tlbil_va(p->addr, p->pid, p->tsize, p->ind);
}
@@ -131,7 +204,7 @@ void flush_tlb_mm(struct mm_struct *mm)
pid = mm->context.id;
if (unlikely(pid == MMU_NO_CONTEXT))
goto no_context;
- if (!cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
+ if (!mm_is_core_local(mm)) {
struct tlb_flush_param p = { .pid = pid };
/* Ignores smp_processor_id() even if set. */
smp_call_function_many(mm_cpumask(mm),
@@ -143,37 +216,49 @@ void flush_tlb_mm(struct mm_struct *mm)
}
EXPORT_SYMBOL(flush_tlb_mm);
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind)
{
struct cpumask *cpu_mask;
unsigned int pid;
preempt_disable();
- pid = vma ? vma->vm_mm->context.id : 0;
+ pid = mm ? mm->context.id : 0;
if (unlikely(pid == MMU_NO_CONTEXT))
goto bail;
- cpu_mask = mm_cpumask(vma->vm_mm);
- if (!cpumask_equal(cpu_mask, cpumask_of(smp_processor_id()))) {
+ cpu_mask = mm_cpumask(mm);
+ if (!mm_is_core_local(mm)) {
/* If broadcast tlbivax is supported, use it */
if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
if (lock)
spin_lock(&tlbivax_lock);
- _tlbivax_bcast(vmaddr, pid);
+ _tlbivax_bcast(vmaddr, pid, tsize, ind);
if (lock)
spin_unlock(&tlbivax_lock);
goto bail;
} else {
- struct tlb_flush_param p = { .pid = pid, .addr = vmaddr };
+ struct tlb_flush_param p = {
+ .pid = pid,
+ .addr = vmaddr,
+ .tsize = tsize,
+ .ind = ind,
+ };
/* Ignores smp_processor_id() even if set in cpu_mask */
smp_call_function_many(cpu_mask,
do_flush_tlb_page_ipi, &p, 1);
}
}
- _tlbil_va(vmaddr, pid);
+ _tlbil_va(vmaddr, pid, tsize, ind);
bail:
preempt_enable();
}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+ mmu_get_tsize(mmu_virtual_psize), 0);
+}
EXPORT_SYMBOL(flush_tlb_page);
#endif /* CONFIG_SMP */
@@ -207,3 +292,156 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
flush_tlb_mm(vma->vm_mm);
}
EXPORT_SYMBOL(flush_tlb_range);
+
+void tlb_flush(struct mmu_gather *tlb)
+{
+ flush_tlb_mm(tlb->mm);
+
+ /* Push out batch of freed page tables */
+ pte_free_finish();
+}
+
+/*
+ * Below are functions specific to the 64-bit variant of Book3E though that
+ * may change in the future
+ */
+
+#ifdef CONFIG_PPC64
+
+/*
+ * Handling of virtual linear page tables or indirect TLB entries
+ * flushing when PTE pages are freed
+ */
+void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
+{
+ int tsize = mmu_psize_defs[mmu_pte_psize].enc;
+
+ if (book3e_htw_enabled) {
+ unsigned long start = address & PMD_MASK;
+ unsigned long end = address + PMD_SIZE;
+ unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
+
+ /* This isn't the most optimal, ideally we would factor out the
+ * while preempt & CPU mask mucking around, or even the IPI but
+ * it will do for now
+ */
+ while (start < end) {
+ __flush_tlb_page(tlb->mm, start, tsize, 1);
+ start += size;
+ }
+ } else {
+ unsigned long rmask = 0xf000000000000000ul;
+ unsigned long rid = (address & rmask) | 0x1000000000000000ul;
+ unsigned long vpte = address & ~rmask;
+
+#ifdef CONFIG_PPC_64K_PAGES
+ vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful;
+#else
+ vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful;
+#endif
+ vpte |= rid;
+ __flush_tlb_page(tlb->mm, vpte, tsize, 0);
+ }
+}
+
+/*
+ * Early initialization of the MMU TLB code
+ */
+static void __early_init_mmu(int boot_cpu)
+{
+ extern unsigned int interrupt_base_book3e;
+ extern unsigned int exc_data_tlb_miss_htw_book3e;
+ extern unsigned int exc_instruction_tlb_miss_htw_book3e;
+
+ unsigned int *ibase = &interrupt_base_book3e;
+ unsigned int mas4;
+
+ /* XXX This will have to be decided at runtime, but right
+ * now our boot and TLB miss code hard wires it. Ideally
+ * we should find out a suitable page size and patch the
+ * TLB miss code (either that or use the PACA to store
+ * the value we want)
+ */
+ mmu_linear_psize = MMU_PAGE_1G;
+
+ /* XXX This should be decided at runtime based on supported
+ * page sizes in the TLB, but for now let's assume 16M is
+ * always there and a good fit (which it probably is)
+ */
+ mmu_vmemmap_psize = MMU_PAGE_16M;
+
+ /* Check if HW tablewalk is present, and if yes, enable it by:
+ *
+ * - patching the TLB miss handlers to branch to the
+ * one dedicates to it
+ *
+ * - setting the global book3e_htw_enabled
+ *
+ * - Set MAS4:INDD and default page size
+ */
+
+ /* XXX This code only checks for TLB 0 capabilities and doesn't
+ * check what page size combos are supported by the HW. It
+ * also doesn't handle the case where a separate array holds
+ * the IND entries from the array loaded by the PT.
+ */
+ if (boot_cpu) {
+ unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+
+ /* Check if HW loader is supported */
+ if ((tlb0cfg & TLBnCFG_IND) &&
+ (tlb0cfg & TLBnCFG_PT)) {
+ patch_branch(ibase + (0x1c0 / 4),
+ (unsigned long)&exc_data_tlb_miss_htw_book3e, 0);
+ patch_branch(ibase + (0x1e0 / 4),
+ (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0);
+ book3e_htw_enabled = 1;
+ }
+ pr_info("MMU: Book3E Page Tables %s\n",
+ book3e_htw_enabled ? "Enabled" : "Disabled");
+ }
+
+ /* Set MAS4 based on page table setting */
+
+ mas4 = 0x4 << MAS4_WIMGED_SHIFT;
+ if (book3e_htw_enabled) {
+ mas4 |= mas4 | MAS4_INDD;
+#ifdef CONFIG_PPC_64K_PAGES
+ mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
+ mmu_pte_psize = MMU_PAGE_256M;
+#else
+ mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
+ mmu_pte_psize = MMU_PAGE_1M;
+#endif
+ } else {
+#ifdef CONFIG_PPC_64K_PAGES
+ mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
+#else
+ mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
+#endif
+ mmu_pte_psize = mmu_virtual_psize;
+ }
+ mtspr(SPRN_MAS4, mas4);
+
+ /* Set the global containing the top of the linear mapping
+ * for use by the TLB miss code
+ */
+ linear_map_top = lmb_end_of_DRAM();
+
+ /* A sync won't hurt us after mucking around with
+ * the MMU configuration
+ */
+ mb();
+}
+
+void __init early_init_mmu(void)
+{
+ __early_init_mmu(1);
+}
+
+void __cpuinit early_init_mmu_secondary(void)
+{
+ __early_init_mmu(0);
+}
+
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 3037911279b..bbdc5b577b8 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -39,7 +39,7 @@
/*
* 40x implementation needs only tlbil_va
*/
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
/* We run the search with interrupts disabled because we have to change
* the PID and I don't want to preempt when that happens.
*/
@@ -71,7 +71,7 @@ _GLOBAL(_tlbil_va)
* 440 implementation uses tlbsx/we for tlbil_va and a full sweep
* of the TLB for everything else.
*/
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
mfspr r5,SPRN_MMUCR
rlwimi r5,r4,0,24,31 /* Set TID */
@@ -124,8 +124,6 @@ _GLOBAL(_tlbil_pid)
* to have the larger code path before the _SECTION_ELSE
*/
-#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
- MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
/*
* Flush MMU TLB on the local processor
*/
@@ -170,7 +168,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX)
* Flush MMU TLB for a particular address, but only on the local processor
* (no broadcast)
*/
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
mfmsr r10
wrteei 0
slwi r4,r4,16
@@ -191,6 +189,85 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
isync
1: wrtee r10
blr
+#elif defined(CONFIG_PPC_BOOK3E)
+/*
+ * New Book3E (>= 2.06) implementation
+ *
+ * Note: We may be able to get away without the interrupt masking stuff
+ * if we save/restore MAS6 on exceptions that might modify it
+ */
+_GLOBAL(_tlbil_pid)
+ slwi r4,r3,MAS6_SPID_SHIFT
+ mfmsr r10
+ wrteei 0
+ mtspr SPRN_MAS6,r4
+ PPC_TLBILX_PID(0,0)
+ wrtee r10
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_pid_noind)
+ slwi r4,r3,MAS6_SPID_SHIFT
+ mfmsr r10
+ ori r4,r4,MAS6_SIND
+ wrteei 0
+ mtspr SPRN_MAS6,r4
+ PPC_TLBILX_PID(0,0)
+ wrtee r10
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_all)
+ PPC_TLBILX_ALL(0,0)
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_va)
+ mfmsr r10
+ wrteei 0
+ cmpwi cr0,r6,0
+ slwi r4,r4,MAS6_SPID_SHIFT
+ rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+ beq 1f
+ rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+ PPC_TLBILX_VA(0,r3)
+ msync
+ isync
+ wrtee r10
+ blr
+
+_GLOBAL(_tlbivax_bcast)
+ mfmsr r10
+ wrteei 0
+ cmpwi cr0,r6,0
+ slwi r4,r4,MAS6_SPID_SHIFT
+ rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+ beq 1f
+ rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+ PPC_TLBIVAX(0,r3)
+ eieio
+ tlbsync
+ sync
+ wrtee r10
+ blr
+
+_GLOBAL(set_context)
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is the second parameter.
+ */
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r4, 0x4(r5)
+#endif
+ mtspr SPRN_PID,r3
+ isync /* Force context change */
+ blr
#else
#error Unsupported processor type !
#endif