powerpc/eeh: Handle multiple EEH errors

commit 7e4e7867b1e551b7b8f326da3604c47332972bc6 upstream.

For one PCI error relevant OPAL event, we possibly have multiple
EEH errors for that. For example, multiple frozen PEs detected on
different PHBs. Unfortunately, we didn't cover the case. The patch
enumarates the return value from eeh_ops::next_error() and change
eeh_handle_special_event() and eeh_ops::next_error() to handle all
existing EEH errors.

As Ben pointed out, we needn't list_for_each_entry_safe() since we
are not deleting any PHB from the hose_list and the EEH serialized
lock should be held while purging EEH events. The patch covers those
suggestions as well.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

1 files changed, 78 insertions, 72 deletions

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 36bed5a1275..d3a132c9127 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -626,84 +626,90 @@ static void eeh_handle_special_event(void)
 {
 	struct eeh_pe *pe, *phb_pe;
 	struct pci_bus *bus;
-	struct pci_controller *hose, *tmp;
+	struct pci_controller *hose;
 	unsigned long flags;
-	int rc = 0;
+	int rc;
 
-	/*
-	 * The return value from next_error() has been classified as follows.
-	 * It might be good to enumerate them. However, next_error() is only
-	 * supported by PowerNV platform for now. So it would be fine to use
-	 * integer directly:
-	 *
-	 * 4 - Dead IOC           3 - Dead PHB
-	 * 2 - Fenced PHB         1 - Frozen PE
-	 * 0 - No error found
-	 *
-	 */
-	rc = eeh_ops->next_error(&pe);
-	if (rc <= 0)
-		return;
 
-	switch (rc) {
-	case 4:
-		/* Mark all PHBs in dead state */
-		eeh_serialize_lock(&flags);
-		list_for_each_entry_safe(hose, tmp,
-				&hose_list, list_node) {
-			phb_pe = eeh_phb_pe_get(hose);
-			if (!phb_pe) continue;
-
-			eeh_pe_state_mark(phb_pe,
-				EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+	do {
+		rc = eeh_ops->next_error(&pe);
+
+		switch (rc) {
+		case EEH_NEXT_ERR_DEAD_IOC:
+			/* Mark all PHBs in dead state */
+			eeh_serialize_lock(&flags);
+
+			/* Purge all events */
+			eeh_remove_event(NULL);
+
+			list_for_each_entry(hose, &hose_list, list_node) {
+				phb_pe = eeh_phb_pe_get(hose);
+				if (!phb_pe) continue;
+
+				eeh_pe_state_mark(phb_pe,
+					EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+			}
+
+			eeh_serialize_unlock(flags);
+
+			break;
+		case EEH_NEXT_ERR_FROZEN_PE:
+		case EEH_NEXT_ERR_FENCED_PHB:
+		case EEH_NEXT_ERR_DEAD_PHB:
+			/* Mark the PE in fenced state */
+			eeh_serialize_lock(&flags);
+
+			/* Purge all events of the PHB */
+			eeh_remove_event(pe);
+
+			if (rc == EEH_NEXT_ERR_DEAD_PHB)
+				eeh_pe_state_mark(pe,
+					EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+			else
+				eeh_pe_state_mark(pe,
+					EEH_PE_ISOLATED | EEH_PE_RECOVERING);
+
+			eeh_serialize_unlock(flags);
+
+			break;
+		case EEH_NEXT_ERR_NONE:
+			return;
+		default:
+			pr_warn("%s: Invalid value %d from next_error()\n",
+				__func__, rc);
+			return;
 		}
-		eeh_serialize_unlock(flags);
-
-		/* Purge all events */
-		eeh_remove_event(NULL);
-		break;
-	case 3:
-	case 2:
-	case 1:
-		/* Mark the PE in fenced state */
-		eeh_serialize_lock(&flags);
-		if (rc == 3)
-			eeh_pe_state_mark(pe,
-				EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
-		else
-			eeh_pe_state_mark(pe,
-				EEH_PE_ISOLATED | EEH_PE_RECOVERING);
-		eeh_serialize_unlock(flags);
-
-		/* Purge all events of the PHB */
-		eeh_remove_event(pe);
-		break;
-	default:
-		pr_err("%s: Invalid value %d from next_error()\n",
-		       __func__, rc);
-		return;
-	}
 
-	/*
-	 * For fenced PHB and frozen PE, it's handled as normal
-	 * event. We have to remove the affected PHBs for dead
-	 * PHB and IOC
-	 */
-	if (rc == 2 || rc == 1)
-		eeh_handle_normal_event(pe);
-	else {
-		list_for_each_entry_safe(hose, tmp,
-			&hose_list, list_node) {
-			phb_pe = eeh_phb_pe_get(hose);
-			if (!phb_pe || !(phb_pe->state & EEH_PE_PHB_DEAD))
-				continue;
-
-			bus = eeh_pe_bus_get(phb_pe);
-			/* Notify all devices that they're about to go down. */
-			eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
-			pcibios_remove_pci_devices(bus);
+		/*
+		 * For fenced PHB and frozen PE, it's handled as normal
+		 * event. We have to remove the affected PHBs for dead
+		 * PHB and IOC
+		 */
+		if (rc == EEH_NEXT_ERR_FROZEN_PE ||
+		    rc == EEH_NEXT_ERR_FENCED_PHB) {
+			eeh_handle_normal_event(pe);
+		} else {
+			list_for_each_entry(hose, &hose_list, list_node) {
+				phb_pe = eeh_phb_pe_get(hose);
+				if (!phb_pe ||
+				    !(phb_pe->state & EEH_PE_PHB_DEAD))
+					continue;
+
+				/* Notify all devices to be down */
+				bus = eeh_pe_bus_get(phb_pe);
+				eeh_pe_dev_traverse(pe,
+					eeh_report_failure, NULL);
+				pcibios_remove_pci_devices(bus);
+			}
 		}
-	}
+
+		/*
+		 * If we have detected dead IOC, we needn't proceed
+		 * any more since all PHBs would have been removed
+		 */
+		if (rc == EEH_NEXT_ERR_DEAD_IOC)
+			break;
+	} while (rc != EEH_NEXT_ERR_NONE);
 }
 
 /**