aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/legacy_serial.c
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2005-11-29 11:21:59 +1100
committerPaul Mackerras <paulus@samba.org>2006-01-09 14:50:58 +1100
commit8dacaedf04467e32c50148751a96150e73323cdc (patch)
tree74e8406ee6a78c7cf232858994ee49547c273042 /arch/powerpc/kernel/legacy_serial.c
parent1c3eb629102bd4e327cc8b08fb9cdae4a985e841 (diff)
[PATCH] powerpc: More serial probe fixes (#2)
This fixes the new serial probe code with some PCI MMIO UARTs, and fixes CHRP build with ARCH=powerpc. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/kernel/legacy_serial.c')
-rw-r--r--arch/powerpc/kernel/legacy_serial.c45
1 files changed, 34 insertions, 11 deletions
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 7a685cae81e..83023bb59ad 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -38,15 +38,13 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq)
{
- u32 *clk, *spd, clock;
+ u32 *clk, *spd, clock = BASE_BAUD * 16;
int index;
/* get clock freq. if present */
clk = (u32 *)get_property(np, "clock-frequency", NULL);
if (clk && *clk)
clock = *clk;
- else
- clock = BASE_BAUD * 16;
/* get default speed if present */
spd = (u32 *)get_property(np, "current-speed", NULL);
@@ -88,7 +86,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
if (iotype == UPIO_PORT)
legacy_serial_ports[index].iobase = base;
else
- legacy_serial_ports[index].membase = (void __iomem *)base;
+ legacy_serial_ports[index].mapbase = base;
legacy_serial_ports[index].iotype = iotype;
legacy_serial_ports[index].uartclk = clock;
legacy_serial_ports[index].irq = irq;
@@ -148,17 +146,17 @@ static int __init add_legacy_pci_port(struct device_node *np,
{
phys_addr_t addr, base;
u32 *addrp;
- int iotype, index = -1;
+ int iotype, index = -1, lindex = 0;
-#if 0
/* We only support ports that have a clock frequency properly
* encoded in the device-tree (that is have an fcode). Anything
* else can't be used that early and will be normally probed by
- * the generic 8250_pci driver later on.
+ * the generic 8250_pci driver later on. The reason is that 8250
+ * compatible UARTs on PCI need all sort of quirks (port offsets
+ * etc...) that this code doesn't know about
*/
if (get_property(np, "clock-frequency", NULL) == NULL)
return -1;
-#endif
/* Get the PCI address. Assume BAR 0 */
addrp = of_get_pci_address(pci_dev, 0, NULL);
@@ -183,7 +181,23 @@ static int __init add_legacy_pci_port(struct device_node *np,
if (np != pci_dev) {
u32 *reg = (u32 *)get_property(np, "reg", NULL);
if (reg && (*reg < 4))
- index = legacy_serial_count + *reg;
+ index = lindex = *reg;
+ }
+
+ /* Local index means it's the Nth port in the PCI chip. Unfortunately
+ * the offset to add here is device specific. We know about those
+ * EXAR ports and we default to the most common case. If your UART
+ * doesn't work for these settings, you'll have to add your own special
+ * cases here
+ */
+ if (device_is_compatible(pci_dev, "pci13a8,152") ||
+ device_is_compatible(pci_dev, "pci13a8,154") ||
+ device_is_compatible(pci_dev, "pci13a8,158")) {
+ addr += 0x200 * lindex;
+ base += 0x200 * lindex;
+ } else {
+ addr += 8 * lindex;
+ base += 8 * lindex;
}
/* Add port, irq will be dealt with later. We passed a translated
@@ -264,7 +278,6 @@ void __init find_legacy_serial_ports(void)
DBG("legacy_serial_console = %d\n", legacy_serial_console);
/* udbg is 64 bits only for now, that will change soon though ... */
-#ifdef CONFIG_PPC64
while (legacy_serial_console >= 0) {
struct legacy_serial_info *info =
&legacy_serial_infos[legacy_serial_console];
@@ -281,7 +294,6 @@ void __init find_legacy_serial_ports(void)
udbg_init_uart(addr, info->speed, info->clock);
break;
}
-#endif /* CONFIG_PPC64 */
DBG(" <- find_legacy_serial_port()\n");
}
@@ -343,6 +355,15 @@ static void __init fixup_port_pio(int index,
}
}
+static void __init fixup_port_mmio(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+ DBG("fixup_port_mmio(%d)\n", index);
+
+ port->membase = ioremap(port->mapbase, 0x100);
+}
+
/*
* This is called as an arch initcall, hopefully before the PCI bus is
* probed and/or the 8250 driver loaded since we need to register our
@@ -377,6 +398,8 @@ static int __init serial_dev_init(void)
fixup_port_irq(i, np, port);
if (port->iotype == UPIO_PORT)
fixup_port_pio(i, np, port);
+ if (port->iotype == UPIO_MEM)
+ fixup_port_mmio(i, np, port);
}
DBG("Registering platform serial ports\n");