[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.

This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.

The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e.  the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.

The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.

I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 22 insertions, 22 deletions

diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 0934f54b2b4..3839d4b7d6a 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -35,11 +35,11 @@
 
 		PowerPC,8349@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
 			timebase-frequency = <0>;	// from bootloader
 			bus-frequency = <0>;		// from bootloader
 			clock-frequency = <0>;		// from bootloader
@@ -70,7 +70,7 @@
 			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
-			interrupts = <0xe 0x8>;
+			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
@@ -81,7 +81,7 @@
 			cell-index = <1>;
 			compatible = "fsl-i2c";
 			reg = <0x3100 0x100>;
-			interrupts = <0xf 0x8>;
+			interrupts = <15 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
@@ -90,7 +90,7 @@
 			cell-index = <0>;
 			compatible = "fsl,spi";
 			reg = <0x7000 0x1000>;
-			interrupts = <0x10 0x8>;
+			interrupts = <16 0x8>;
 			interrupt-parent = <&ipic>;
 			mode = "cpu";
 		};
@@ -103,7 +103,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
-			interrupts = <0x27 0x8>;
+			interrupts = <39 0x8>;
 			phy_type = "ulpi";
 			port1;
 		};
@@ -115,7 +115,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
-			interrupts = <0x26 0x8>;
+			interrupts = <38 0x8>;
 			dr_mode = "otg";
 			phy_type = "ulpi";
 		};
@@ -128,13 +128,13 @@
 
 			phy0: ethernet-phy@19 {
 				interrupt-parent = <&ipic>;
-				interrupts = <0x14 0x8>;
+				interrupts = <20 0x8>;
 				reg = <0x19>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1a {
 				interrupt-parent = <&ipic>;
-				interrupts = <0x15 0x8>;
+				interrupts = <21 0x8>;
 				reg = <0x1a>;
 				device_type = "ethernet-phy";
 			};
@@ -147,7 +147,7 @@
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
+			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = <&phy0>;
 			linux,network-index = <0>;
@@ -160,7 +160,7 @@
 			compatible = "gianfar";
 			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
+			interrupts = <35 0x8 36 0x8 37 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = <&phy1>;
 			linux,network-index = <1>;
@@ -172,7 +172,7 @@
 			compatible = "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <0x9 0x8>;
+			interrupts = <9 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
@@ -182,7 +182,7 @@
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <0xa 0x8>;
+			interrupts = <10 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
@@ -191,10 +191,10 @@
 			model = "SEC2";
 			compatible = "talitos";
 			reg = <0x30000 0x10000>;
-			interrupts = <0xb 0x8>;
+			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
 			num-channels = <4>;
-			channel-fifo-len = <0x18>;
+			channel-fifo-len = <24>;
 			exec-units-mask = <0x0000007e>;
 			/* desc mask is for rev2.0,
 			 * we need runtime fixup for >2.0 */
@@ -222,10 +222,10 @@
 		interrupt-map = <
 
 				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8>;
+				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 23 0x8>;
 
 		interrupt-parent = <&ipic>;
 		interrupts = <0x42 0x8>;