Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...

31 files changed, 2809 insertions, 532 deletions

diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
index 23f2ab67574..8f5f1e81baf 100644
--- a/arch/mn10300/kernel/Makefile
+++ b/arch/mn10300/kernel/Makefile
@@ -3,13 +3,16 @@
 #
 extra-y := head.o init_task.o vmlinux.lds
 
-obj-y   := process.o signal.o entry.o fpu.o traps.o irq.o \
+fpu-obj-y := fpu-nofpu.o fpu-nofpu-low.o
+fpu-obj-$(CONFIG_FPU) := fpu.o fpu-low.o
+
+obj-y   := process.o signal.o entry.o traps.o irq.o \
 	   ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
-	   switch_to.o mn10300_ksyms.o kernel_execve.o
+	   switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y)
 
-obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o
+obj-$(CONFIG_SMP) += smp.o smp-low.o
 
-obj-$(CONFIG_FPU) += fpu-low.o
+obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o
 
 obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \
 			       mn10300-debug.o
@@ -17,7 +20,7 @@ obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
 obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
 obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
 
-ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y)
 obj-$(CONFIG_GDBSTUB) += gdb-cache.o
 endif
 
@@ -25,3 +28,5 @@ obj-$(CONFIG_MN10300_RTC) += rtc.o
 obj-$(CONFIG_PROFILE) += profile.o profile-low.o
 obj-$(CONFIG_MODULES) += module.o
 obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_CSRC_MN10300) += csrc-mn10300.o
+obj-$(CONFIG_CEVT_MN10300) += cevt-mn10300.o
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 02dc7e461fe..96f24fab7de 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -23,6 +23,7 @@ void foo(void)
 
 	OFFSET(TI_task,			thread_info, task);
 	OFFSET(TI_exec_domain,		thread_info, exec_domain);
+	OFFSET(TI_frame,		thread_info, frame);
 	OFFSET(TI_flags,		thread_info, flags);
 	OFFSET(TI_cpu,			thread_info, cpu);
 	OFFSET(TI_preempt_count,	thread_info, preempt_count);
@@ -66,7 +67,15 @@ void foo(void)
 	OFFSET(THREAD_SP,		thread_struct, sp);
 	OFFSET(THREAD_A3,		thread_struct, a3);
 	OFFSET(THREAD_USP,		thread_struct, usp);
-	OFFSET(THREAD_FRAME,		thread_struct, __frame);
+#ifdef CONFIG_FPU
+	OFFSET(THREAD_FPU_FLAGS,	thread_struct, fpu_flags);
+	OFFSET(THREAD_FPU_STATE,	thread_struct, fpu_state);
+	DEFINE(__THREAD_USING_FPU,	THREAD_USING_FPU);
+	DEFINE(__THREAD_HAS_FPU,	THREAD_HAS_FPU);
+#endif /* CONFIG_FPU */
+	BLANK();
+
+	OFFSET(TASK_THREAD,		task_struct, thread);
 	BLANK();
 
 	DEFINE(CLONE_VM_asm,		CLONE_VM);
diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c
new file mode 100644
index 00000000000..d4cb535bf78
--- /dev/null
+++ b/arch/mn10300/kernel/cevt-mn10300.c
@@ -0,0 +1,131 @@
+/* MN10300 clockevents
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <asm/timex.h>
+#include "internal.h"
+
+#ifdef CONFIG_SMP
+#if (CONFIG_NR_CPUS > 2) && !defined(CONFIG_GEENERIC_CLOCKEVENTS_BROADCAST)
+#error "This doesn't scale well! Need per-core local timers."
+#endif
+#else /* CONFIG_SMP */
+#define stop_jiffies_counter1()
+#define reload_jiffies_counter1(x)
+#define TMJC1IRQ TMJCIRQ
+#endif
+
+
+static int next_event(unsigned long delta,
+		      struct clock_event_device *evt)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu == 0) {
+		stop_jiffies_counter();
+		reload_jiffies_counter(delta - 1);
+	} else {
+		stop_jiffies_counter1();
+		reload_jiffies_counter1(delta - 1);
+	}
+	return 0;
+}
+
+static void set_clock_mode(enum clock_event_mode mode,
+			   struct clock_event_device *evt)
+{
+	/* Nothing to do ...  */
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, mn10300_clockevent_device);
+static DEFINE_PER_CPU(struct irqaction, timer_irq);
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *cd;
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu == 0)
+		stop_jiffies_counter();
+	else
+		stop_jiffies_counter1();
+
+	cd = &per_cpu(mn10300_clockevent_device, cpu);
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static void event_handler(struct clock_event_device *dev)
+{
+}
+
+int __init init_clockevents(void)
+{
+	struct clock_event_device *cd;
+	struct irqaction *iact;
+	unsigned int cpu = smp_processor_id();
+
+	cd = &per_cpu(mn10300_clockevent_device, cpu);
+
+	if (cpu == 0) {
+		stop_jiffies_counter();
+		cd->irq	= TMJCIRQ;
+	} else {
+		stop_jiffies_counter1();
+		cd->irq	= TMJC1IRQ;
+	}
+
+	cd->name		= "Timestamp";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+
+	/* Calculate the min / max delta */
+	clockevent_set_clock(cd, MN10300_JCCLK);
+
+	cd->max_delta_ns	= clockevent_delta2ns(TMJCBR_MAX, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(100, cd);
+
+	cd->rating		= 200;
+	cd->cpumask		= cpumask_of(smp_processor_id());
+	cd->set_mode		= set_clock_mode;
+	cd->event_handler	= event_handler;
+	cd->set_next_event	= next_event;
+
+	iact = &per_cpu(timer_irq, cpu);
+	iact->flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER;
+	iact->handler = timer_interrupt;
+
+	clockevents_register_device(cd);
+
+#if defined(CONFIG_SMP) && !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+	/* setup timer irq affinity so it only runs on this cpu */
+	{
+		struct irq_desc *desc;
+		desc = irq_to_desc(cd->irq);
+		cpumask_copy(desc->affinity, cpumask_of(cpu));
+		iact->flags |= IRQF_NOBALANCING;
+	}
+#endif
+
+	if (cpu == 0) {
+		reload_jiffies_counter(MN10300_JC_PER_HZ - 1);
+		iact->name = "CPU0 Timer";
+	} else {
+		reload_jiffies_counter1(MN10300_JC_PER_HZ - 1);
+		iact->name = "CPU1 Timer";
+	}
+
+	setup_jiffies_interrupt(cd->irq, iact);
+
+	return 0;
+}
diff --git a/arch/mn10300/kernel/csrc-mn10300.c b/arch/mn10300/kernel/csrc-mn10300.c
new file mode 100644
index 00000000000..ba2f0c4d6e0
--- /dev/null
+++ b/arch/mn10300/kernel/csrc-mn10300.c
@@ -0,0 +1,35 @@
+/* MN10300 clocksource
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <asm/timex.h>
+#include "internal.h"
+
+static cycle_t mn10300_read(struct clocksource *cs)
+{
+	return read_timestamp_counter();
+}
+
+static struct clocksource clocksource_mn10300 = {
+	.name	= "TSC",
+	.rating	= 200,
+	.read	= mn10300_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+int __init init_clocksource(void)
+{
+	startup_timestamp_counter();
+	clocksource_set_clock(&clocksource_mn10300, MN10300_TSCCLK);
+	clocksource_register(&clocksource_mn10300);
+	return 0;
+}
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 3d394b4eefb..f00b9bafcd3 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -28,25 +28,17 @@
 #include <asm/asm-offsets.h>
 #include <asm/frame.inc>
 
+#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB)
+#include <asm/gdb-stub.h>
+#endif /* CONFIG_SMP && CONFIG_GDBSTUB */
+
 #ifdef CONFIG_PREEMPT
-#define preempt_stop		__cli
+#define preempt_stop		LOCAL_IRQ_DISABLE
 #else
 #define preempt_stop
 #define resume_kernel		restore_all
 #endif
 
-	.macro __cli
-	and	~EPSW_IM,epsw
-	or	EPSW_IE|MN10300_CLI_LEVEL,epsw
-	nop
-	nop
-	nop
-	.endm
-	.macro __sti
-	or	EPSW_IE|EPSW_IM_7,epsw
-	.endm
-
-
 	.am33_2
 
 ###############################################################################
@@ -88,7 +80,7 @@ syscall_call:
 syscall_exit:
 	# make sure we don't miss an interrupt setting need_resched or
 	# sigpending between sampling and the rti
-	__cli
+	LOCAL_IRQ_DISABLE
 	mov	(TI_flags,a2),d2
 	btst	_TIF_ALLWORK_MASK,d2
 	bne	syscall_exit_work
@@ -105,7 +97,7 @@ restore_all:
 syscall_exit_work:
 	btst	_TIF_SYSCALL_TRACE,d2
 	beq	work_pending
-	__sti				# could let syscall_trace_exit() call
+	LOCAL_IRQ_ENABLE		# could let syscall_trace_exit() call
 					# schedule() instead
 	mov	fp,d0
 	call	syscall_trace_exit[],0	# do_syscall_trace(regs)
@@ -121,7 +113,7 @@ work_resched:
 
 	# make sure we don't miss an interrupt setting need_resched or
 	# sigpending between sampling and the rti
-	__cli
+	LOCAL_IRQ_DISABLE
 
 	# is there any work to be done other than syscall tracing?
 	mov	(TI_flags,a2),d2
@@ -168,7 +160,7 @@ ret_from_intr:
 ENTRY(resume_userspace)
 	# make sure we don't miss an interrupt setting need_resched or
 	# sigpending between sampling and the rti
-	__cli
+	LOCAL_IRQ_DISABLE
 
 	# is there any work to be done on int/exception return?
 	mov	(TI_flags,a2),d2
@@ -178,7 +170,7 @@ ENTRY(resume_userspace)
 
 #ifdef CONFIG_PREEMPT
 ENTRY(resume_kernel)
-	__cli
+	LOCAL_IRQ_DISABLE
 	mov	(TI_preempt_count,a2),d0	# non-zero preempt_count ?
 	cmp	0,d0
 	bne	restore_all
@@ -216,31 +208,6 @@ ENTRY(irq_handler)
 
 ###############################################################################
 #
-# Monitor Signal handler entry point
-#
-###############################################################################
-ENTRY(monitor_signal)
-	movbu	(0xae000001),d1
-	cmp	1,d1
-	beq	monsignal
-	ret	[],0
-
-monsignal:
-	or	EPSW_NMID,epsw
-	mov	d0,a0
-	mov	a0,sp
-	mov	(REG_EPSW,fp),d1
-	and	~EPSW_nSL,d1
-	mov	d1,(REG_EPSW,fp)
-	movm	(sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
-	mov	(sp),a1
-	mov	a1,usp
-	movm	(sp),[other]
-	add	4,sp
-here:	jmp	0x8e000008-here+0x8e000008
-
-###############################################################################
-#
 # Double Fault handler entry point
 # - note that there will not be a stack, D0/A0 will hold EPSW/PC as were
 #
@@ -276,6 +243,10 @@ double_fault_loop:
 ENTRY(raw_bus_error)
 	add	-4,sp
 	mov	d0,(sp)
+#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
+	mov	(MMUCTR),d0
+	mov	d0,(MMUCTR)
+#endif
 	mov	(BCBERR),d0		# what
 	btst	BCBERR_BEMR_DMA,d0	# see if it was an external bus error
 	beq	__common_exception_aux	# it wasn't
@@ -302,11 +273,88 @@ ENTRY(nmi_handler)
 	add	-4,sp
 	mov	d0,(sp)
 	mov	(TBR),d0
+
+#ifdef CONFIG_SMP
+	add	-4,sp
+	mov	d0,(sp)			# save d0(TBR)
+	movhu	(NMIAGR),d0
+	and	NMIAGR_GN,d0
+	lsr	0x2,d0
+	cmp	CALL_FUNCTION_NMI_IPI,d0
+	bne	5f			# if not call function, jump
+
+	# function call nmi ipi
+	add	4,sp			# no need to store TBR
+	mov	GxICR_DETECT,d0		# clear NMI request
+	movbu	d0,(GxICR(CALL_FUNCTION_NMI_IPI))
+	movhu	(GxICR(CALL_FUNCTION_NMI_IPI)),d0
+	and	~EPSW_NMID,epsw		# enable NMI
+
+	mov	(sp),d0			# restore d0
+	SAVE_ALL
+	call	smp_nmi_call_function_interrupt[],0
+	RESTORE_ALL
+
+5:
+#ifdef CONFIG_GDBSTUB
+	cmp	GDB_NMI_IPI,d0
+	bne	3f			# if not gdb nmi ipi, jump
+
+	# gdb nmi ipi
+	add	4,sp			# no need to store TBR
+	mov	GxICR_DETECT,d0		# clear NMI
+	movbu	d0,(GxICR(GDB_NMI_IPI))
+	movhu	(GxICR(GDB_NMI_IPI)),d0
+	and	~EPSW_NMID,epsw		# enable NMI
+#ifdef CONFIG_MN10300_CACHE_ENABLED
+	mov	(gdbstub_nmi_opr_type),d0
+	cmp	GDBSTUB_NMI_CACHE_PURGE,d0
+	bne	4f			# if not gdb cache purge, jump
+
+	# gdb cache purge nmi ipi
+	add	-20,sp
+	mov	d1,(4,sp)
+	mov	a0,(8,sp)
+	mov	a1,(12,sp)
+	mov	mdr,d0
+	mov	d0,(16,sp)
+	call	gdbstub_local_purge_cache[],0
+	mov	0x1,d0
+	mov	(CPUID),d1
+	asl	d1,d0
+	mov	gdbstub_nmi_cpumask,a0
+	bclr	d0,(a0)
+	mov	(4,sp),d1
+	mov	(8,sp),a0
+	mov	(12,sp),a1
+	mov	(16,sp),d0
+	mov	d0,mdr
+	add	20,sp
+	mov	(sp),d0
+	add	4,sp
+	rti
+4:
+#endif /* CONFIG_MN10300_CACHE_ENABLED */
+	# gdb wait nmi ipi
+	mov     (sp),d0
+	SAVE_ALL
+	call    gdbstub_nmi_wait[],0
+	RESTORE_ALL
+3:
+#endif /* CONFIG_GDBSTUB */
+	mov     (sp),d0                 # restore TBR to d0
+	add     4,sp
+#endif /* CONFIG_SMP */
+
 	bra	__common_exception_nonmi
 
 ENTRY(__common_exception)
 	add	-4,sp
 	mov	d0,(sp)
+#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
+	mov	(MMUCTR),d0
+	mov	d0,(MMUCTR)
+#endif
 
 __common_exception_aux:
 	mov	(TBR),d0
@@ -331,15 +379,21 @@ __common_exception_nonmi:
 	mov	d0,(REG_ORIG_D0,fp)
 
 #ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_SMP
+	call	gdbstub_busy_check[],0
+	and	d0,d0			# check return value
+	beq	2f
+#else  /* CONFIG_SMP */
 	btst	0x01,(gdbstub_busy)
 	beq	2f
+#endif /* CONFIG_SMP */
 	and	~EPSW_IE,epsw
 	mov	fp,d0
 	mov	a2,d1
 	call	gdbstub_exception[],0	# gdbstub itself caused an exception
 	bra	restore_all
 2:
-#endif
+#endif /* CONFIG_GDBSTUB */
 
 	mov	fp,d0			# arg 0: stacked register file
 	mov	a2,d1			# arg 1: exception number
@@ -374,11 +428,7 @@ ENTRY(set_excp_vector)
 	add	exception_table,d0
 	mov	d1,(d0)
 	mov	4,d1
-#if defined(CONFIG_MN10300_CACHE_WBACK)
-	jmp	mn10300_dcache_flush_inv_range2
-#else
 	ret	[],0
-#endif
 
 ###############################################################################
 #
diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S
index 96cfd47e68d..78df25cfae2 100644
--- a/arch/mn10300/kernel/fpu-low.S
+++ b/arch/mn10300/kernel/fpu-low.S
@@ -8,25 +8,14 @@
  * as published by the Free Software Foundation; either version
  * 2 of the Licence, or (at your option) any later version.
  */
+#include <linux/linkage.h>
 #include <asm/cpu-regs.h>
+#include <asm/smp.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/frame.inc>
 
-###############################################################################
-#
-# void fpu_init_state(void)
-# - initialise the FPU
-#
-###############################################################################
-	.globl	fpu_init_state
-	.type	fpu_init_state,@function
-fpu_init_state:
-	mov	epsw,d0
-	or	EPSW_FE,epsw
-
-#ifdef CONFIG_MN10300_PROC_MN103E010
-	nop
-	nop
-	nop
-#endif
+.macro FPU_INIT_STATE_ALL
 	fmov	0,fs0
 	fmov	fs0,fs1
 	fmov	fs0,fs2
@@ -60,7 +49,100 @@ fpu_init_state:
 	fmov	fs0,fs30
 	fmov	fs0,fs31
 	fmov	FPCR_INIT,fpcr
+.endm
+
+.macro FPU_SAVE_ALL areg,dreg
+	fmov	fs0,(\areg+)
+	fmov	fs1,(\areg+)
+	fmov	fs2,(\areg+)
+	fmov	fs3,(\areg+)
+	fmov	fs4,(\areg+)
+	fmov	fs5,(\areg+)
+	fmov	fs6,(\areg+)
+	fmov	fs7,(\areg+)
+	fmov	fs8,(\areg+)
+	fmov	fs9,(\areg+)
+	fmov	fs10,(\areg+)
+	fmov	fs11,(\areg+)
+	fmov	fs12,(\areg+)
+	fmov	fs13,(\areg+)
+	fmov	fs14,(\areg+)
+	fmov	fs15,(\areg+)
+	fmov	fs16,(\areg+)
+	fmov	fs17,(\areg+)
+	fmov	fs18,(\areg+)
+	fmov	fs19,(\areg+)
+	fmov	fs20,(\areg+)
+	fmov	fs21,(\areg+)
+	fmov	fs22,(\areg+)
+	fmov	fs23,(\areg+)
+	fmov	fs24,(\areg+)
+	fmov	fs25,(\areg+)
+	fmov	fs26,(\areg+)
+	fmov	fs27,(\areg+)
+	fmov	fs28,(\areg+)
+	fmov	fs29,(\areg+)
+	fmov	fs30,(\areg+)
+	fmov	fs31,(\areg+)
+	fmov	fpcr,\dreg
+	mov	\dreg,(\areg)
+.endm
+
+.macro FPU_RESTORE_ALL areg,dreg
+	fmov	(\areg+),fs0
+	fmov	(\areg+),fs1
+	fmov	(\areg+),fs2
+	fmov	(\areg+),fs3
+	fmov	(\areg+),fs4
+	fmov	(\areg+),fs5
+	fmov	(\areg+),fs6
+	fmov	(\areg+),fs7
+	fmov	(\areg+),fs8
+	fmov	(\areg+),fs9
+	fmov	(\areg+),fs10
+	fmov	(\areg+),fs11
+	fmov	(\areg+),fs12
+	fmov	(\areg+),fs13
+	fmov	(\areg+),fs14
+	fmov	(\areg+),fs15
+	fmov	(\areg+),fs16
+	fmov	(\areg+),fs17
+	fmov	(\areg+),fs18
+	fmov	(\areg+),fs19
+	fmov	(\areg+),fs20
+	fmov	(\areg+),fs21
+	fmov	(\areg+),fs22
+	fmov	(\areg+),fs23
+	fmov	(\areg+),fs24
+	fmov	(\areg+),fs25
+	fmov	(\areg+),fs26
+	fmov	(\areg+),fs27
+	fmov	(\areg+),fs28
+	fmov	(\areg+),fs29
+	fmov	(\areg+),fs30
+	fmov	(\areg+),fs31
+	mov	(\areg),\dreg
+	fmov	\dreg,fpcr
+.endm
 
+###############################################################################
+#
+# void fpu_init_state(void)
+# - initialise the FPU
+#
+###############################################################################
+	.globl	fpu_init_state
+	.type	fpu_init_state,@function
+fpu_init_state:
+	mov	epsw,d0
+	or	EPSW_FE,epsw
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	nop
+	nop
+	nop
+#endif
+	FPU_INIT_STATE_ALL
 #ifdef CONFIG_MN10300_PROC_MN103E010
 	nop
 	nop
@@ -89,40 +171,7 @@ fpu_save:
 	nop
 #endif
 	mov	d0,a0
-	fmov	fs0,(a0+)
-	fmov	fs1,(a0+)
-	fmov	fs2,(a0+)
-	fmov	fs3,(a0+)
-	fmov	fs4,(a0+)
-	fmov	fs5,(a0+)
-	fmov	fs6,(a0+)
-	fmov	fs7,(a0+)
-	fmov	fs8,(a0+)
-	fmov	fs9,(a0+)
-	fmov	fs10,(a0+)
-	fmov	fs11,(a0+)
-	fmov	fs12,(a0+)
-	fmov	fs13,(a0+)
-	fmov	fs14,(a0+)
-	fmov	fs15,(a0+)
-	fmov	fs16,(a0+)
-	fmov	fs17,(a0+)
-	fmov	fs18,(a0+)
-	fmov	fs19,(a0+)
-	fmov	fs20,(a0+)
-	fmov	fs21,(a0+)
-	fmov	fs22,(a0+)
-	fmov	fs23,(a0+)
-	fmov	fs24,(a0+)
-	fmov	fs25,(a0+)
-	fmov	fs26,(a0+)
-	fmov	fs27,(a0+)
-	fmov	fs28,(a0+)
-	fmov	fs29,(a0+)
-	fmov	fs30,(a0+)
-	fmov	fs31,(a0+)
-	fmov	fpcr,d0
-	mov	d0,(a0)
+	FPU_SAVE_ALL	a0,d0
 #ifdef CONFIG_MN10300_PROC_MN103E010
 	nop
 	nop
@@ -135,63 +184,75 @@ fpu_save:
 
 ###############################################################################
 #
-# void fpu_restore(struct fpu_state_struct *)
-# - restore the fpu state
-# - note that an FPU Operational exception might occur during this process
+# void fpu_disabled(void)
+# - handle an exception due to the FPU being disabled
+#   when CONFIG_FPU is enabled
 #
 ###############################################################################
-	.globl	fpu_restore
-	.type	fpu_restore,@function
-fpu_restore:
-	mov	epsw,d1
-	or	EPSW_FE,epsw		/* enable the FPU so we can access it */
-
-#ifdef CONFIG_MN10300_PROC_MN103E010
+	.type	fpu_disabled,@function
+	.globl	fpu_disabled
+fpu_disabled:
+	or	EPSW_nAR|EPSW_FE,epsw
 	nop
 	nop
-#endif
-	mov	d0,a0
-	fmov	(a0+),fs0
-	fmov	(a0+),fs1
-	fmov	(a0+),fs2
-	fmov	(a0+),fs3
-	fmov	(a0+),fs4
-	fmov	(a0+),fs5
-	fmov	(a0+),fs6
-	fmov	(a0+),fs7
-	fmov	(a0+),fs8
-	fmov	(a0+),fs9
-	fmov	(a0+),fs10
-	fmov	(a0+),fs11
-	fmov	(a0+),fs12
-	fmov	(a0+),fs13
-	fmov	(a0+),fs14
-	fmov	(a0+),fs15
-	fmov	(a0+),fs16
-	fmov	(a0+),fs17
-	fmov	(a0+),fs18
-	fmov	(a0+),fs19
-	fmov	(a0+),fs20
-	fmov	(a0+),fs21
-	fmov	(a0+),fs22
-	fmov	(a0+),fs23
-	fmov	(a0+),fs24
-	fmov	(a0+),fs25
-	fmov	(a0+),fs26
-	fmov	(a0+),fs27
-	fmov	(a0+),fs28
-	fmov	(a0+),fs29
-	fmov	(a0+),fs30
-	fmov	(a0+),fs31
-	mov	(a0),d0
-	fmov	d0,fpcr
-#ifdef CONFIG_MN10300_PROC_MN103E010
 	nop
+
+	mov	sp,a1
+	mov	(a1),d1			/* get epsw of user context */
+	and	~(THREAD_SIZE-1),a1	/* a1: (thread_info *ti) */
+	mov	(TI_task,a1),a2		/* a2: (task_struct *tsk) */
+	btst	EPSW_nSL,d1
+	beq	fpu_used_in_kernel
+
+	or	EPSW_FE,d1
+	mov	d1,(sp)
+	mov	(TASK_THREAD+THREAD_FPU_FLAGS,a2),d1
+#ifndef CONFIG_LAZY_SAVE_FPU
+	or	__THREAD_HAS_FPU,d1
+	mov	d1,(TASK_THREAD+THREAD_FPU_FLAGS,a2)
+#else  /* !CONFIG_LAZY_SAVE_FPU */
+	mov	(fpu_state_owner),a0
+	cmp	0,a0
+	beq	fpu_regs_save_end
+
+	mov	(TASK_THREAD+THREAD_UREGS,a0),a1
+	add	TASK_THREAD+THREAD_FPU_STATE,a0
+	FPU_SAVE_ALL a0,d0
+
+	mov	(REG_EPSW,a1),d0
+	and	~EPSW_FE,d0
+	mov	d0,(REG_EPSW,a1)
+
+fpu_regs_save_end:
+	mov	a2,(fpu_state_owner)
+#endif /* !CONFIG_LAZY_SAVE_FPU */
+
+	btst	__THREAD_USING_FPU,d1
+	beq	fpu_regs_init
+	add	TASK_THREAD+THREAD_FPU_STATE,a2
+	FPU_RESTORE_ALL a2,d0
+	rti
+
+fpu_regs_init:
+	FPU_INIT_STATE_ALL
+	add	TASK_THREAD+THREAD_FPU_FLAGS,a2
+	bset	__THREAD_USING_FPU,(0,a2)
+	rti
+
+fpu_used_in_kernel:
+	and	~(EPSW_nAR|EPSW_FE),epsw
 	nop
 	nop
-#endif
 
-	mov	d1,epsw
-	ret	[],0
+	add	-4,sp
+	SAVE_ALL
+	mov	-1,d0
+	mov	d0,(REG_ORIG_D0,fp)
+
+	and	~EPSW_NMID,epsw
+
+	mov	fp,d0
+	call	fpu_disabled_in_kernel[],0
+	jmp	ret_from_exception
 
-	.size	fpu_restore,.-fpu_restore
+	.size	fpu_disabled,.-fpu_disabled
diff --git a/arch/mn10300/kernel/fpu-nofpu-low.S b/arch/mn10300/kernel/fpu-nofpu-low.S
new file mode 100644
index 00000000000..7ea087a549f
--- /dev/null
+++ b/arch/mn10300/kernel/fpu-nofpu-low.S
@@ -0,0 +1,39 @@
+/* MN10300 Low level FPU management operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/linkage.h>
+#include <asm/cpu-regs.h>
+#include <asm/smp.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/frame.inc>
+
+###############################################################################
+#
+# void fpu_disabled(void)
+# - handle an exception due to the FPU being disabled
+#   when CONFIG_FPU is disabled
+#
+###############################################################################
+	.type	fpu_disabled,@function
+	.globl	fpu_disabled
+fpu_disabled:
+	add	-4,sp
+	SAVE_ALL
+	mov	-1,d0
+	mov	d0,(REG_ORIG_D0,fp)
+
+	and	~EPSW_NMID,epsw
+
+	mov	fp,d0
+	call	unexpected_fpu_exception[],0
+	jmp	ret_from_exception
+
+	.size	fpu_disabled,.-fpu_disabled
diff --git a/arch/mn10300/kernel/fpu-nofpu.c b/arch/mn10300/kernel/fpu-nofpu.c
new file mode 100644
index 00000000000..31c765b92c5
--- /dev/null
+++ b/arch/mn10300/kernel/fpu-nofpu.c
@@ -0,0 +1,30 @@
+/* MN10300 FPU management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/fpu.h>
+
+/*
+ * handle an FPU operational exception
+ * - there's a possibility that if the FPU is asynchronous, the signal might
+ *   be meant for a process other than the current one
+ */
+asmlinkage
+void unexpected_fpu_exception(struct pt_regs *regs, enum exception_code code)
+{
+	panic("An FPU exception was received, but there's no FPU enabled.");
+}
+
+/*
+ * fill in the FPU structure for a core dump
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg)
+{
+	return 0; /* not valid */
+}
diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c
index e705f25ad5f..5f9c3fa19a8 100644
--- a/arch/mn10300/kernel/fpu.c
+++ b/arch/mn10300/kernel/fpu.c
@@ -12,56 +12,19 @@
 #include <asm/fpu.h>
 #include <asm/elf.h>
 #include <asm/exceptions.h>
+#include <asm/system.h>
 
+#ifdef CONFIG_LAZY_SAVE_FPU
 struct task_struct *fpu_state_owner;
+#endif
 
 /*
- * handle an exception due to the FPU being disabled
+ * error functions in FPU disabled exception
  */
-asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
+asmlinkage void fpu_disabled_in_kernel(struct pt_regs *regs)
 {
-	struct task_struct *tsk = current;
-
-	if (!user_mode(regs))
-		die_if_no_fixup("An FPU Disabled exception happened in"
-				" kernel space\n",
-				regs, code);
-