Merge branch 'linus' into sched/core

Conflicts:
	fs/proc/array.c

Merge reason: resolve conflict and queue up dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 files changed, 20 insertions, 54 deletions

diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 2646fcbd7d8..02dc7e461fe 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -85,7 +85,7 @@ void foo(void)
 	OFFSET(__rx_buffer,		mn10300_serial_port, rx_buffer);
 	OFFSET(__rx_inp,		mn10300_serial_port, rx_inp);
 	OFFSET(__rx_outp,		mn10300_serial_port, rx_outp);
-	OFFSET(__tx_info_buffer,	mn10300_serial_port, uart.info);
+	OFFSET(__uart_state,		mn10300_serial_port, uart.state);
 	OFFSET(__tx_xchar,		mn10300_serial_port, tx_xchar);
 	OFFSET(__tx_break,		mn10300_serial_port, tx_break);
 	OFFSET(__intr_flags,		mn10300_serial_port, intr_flags);
@@ -95,7 +95,7 @@ void foo(void)
 	OFFSET(__iobase,		mn10300_serial_port, _iobase);
 
 	DEFINE(__UART_XMIT_SIZE,	UART_XMIT_SIZE);
-	OFFSET(__xmit_buffer,		uart_info, xmit.buf);
-	OFFSET(__xmit_head,		uart_info, xmit.head);
-	OFFSET(__xmit_tail,		uart_info, xmit.tail);
+	OFFSET(__xmit_buffer,		uart_state, xmit.buf);
+	OFFSET(__xmit_head,		uart_state, xmit.head);
+	OFFSET(__xmit_tail,		uart_state, xmit.tail);
 }
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index e0d2563af4f..a94e7ea3faa 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -723,7 +723,7 @@ ENTRY(sys_call_table)
 	.long sys_preadv
 	.long sys_pwritev		/* 335 */
 	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
index 80d423b80af..a481b043bea 100644
--- a/arch/mn10300/kernel/init_task.c
+++ b/arch/mn10300/kernel/init_task.c
@@ -27,9 +27,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
index 22448538822..66702d25661 100644
--- a/arch/mn10300/kernel/mn10300-serial-low.S
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -130,7 +130,7 @@ ENTRY(mn10300_serial_vdma_tx_handler)
 	or	d2,d2
 	bne	mnsc_vdma_tx_xchar
 
-	mov	(__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+	mov	(__uart_state,a3),a2	# see if the TTY Tx queue has anything in it
 	mov	(__xmit_tail,a2),d3
 	mov	(__xmit_head,a2),d2
 	cmp	d3,d2
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 2fd59664d00..229b710fc5d 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -391,7 +391,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.info->port.tty;
+	struct tty_struct *tty = port->uart.state->port.tty;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
@@ -566,16 +566,16 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
 {
 	_enter("%s", port->name);
 
-	if (!port->uart.info || !port->uart.info->port.tty) {
+	if (!port->uart.state || !port->uart.state->port.tty) {
 		mn10300_serial_dis_tx_intr(port);
 		return;
 	}
 
 	if (uart_tx_stopped(&port->uart) ||
-	    uart_circ_empty(&port->uart.info->xmit))
+	    uart_circ_empty(&port->uart.state->xmit))
 		mn10300_serial_dis_tx_intr(port);
 
-	if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(&port->uart.state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&port->uart);
 }
 
@@ -596,7 +596,7 @@ static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
 	*port->_control = ctr;
 
 	uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
-	wake_up_interruptible(&port->uart.info->delta_msr_wait);
+	wake_up_interruptible(&port->uart.state->port.delta_msr_wait);
 }
 
 /*
@@ -705,8 +705,8 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
 
 	_enter("%s{%lu}",
 	       port->name,
-	       CIRC_CNT(&port->uart.info->xmit.head,
-			&port->uart.info->xmit.tail,
+	       CIRC_CNT(&port->uart.state->xmit.head,
+			&port->uart.state->xmit.tail,
 			UART_XMIT_SIZE));
 
 	/* kick the virtual DMA controller */
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 79890edfd67..3f24c298a3a 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -285,7 +285,7 @@ static void c_stop(struct seq_file *m, void *v)
 {
 }
 
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
 	.start	= c_start,
 	.next	= c_next,
 	.stop	= c_stop,
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 3e52a105432..8ca5af00334 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -19,7 +19,6 @@
 #include <linux/stat.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/tty.h>
 
 #include <asm/uaccess.h>
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 76f41bdb79c..10549dcfb61 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -44,24 +44,8 @@ SECTIONS
   RO_DATA(PAGE_SIZE)
 
   /* writeable */
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	}
-
-  .data_nosave : { NOSAVE_DATA; }
-
-  .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
-  .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
-
-  /* rarely changed data like cpu maps */
-  . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly)) {
-	READ_MOSTLY_DATA(32);
-	_edata = .;		/* End of data section */
-  }
-
-  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
+  RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+  _edata = .;
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
@@ -74,22 +58,8 @@ SECTIONS
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT;
-	_einittext = .;
-  }
-  .init.data : { INIT_DATA; }
-  .setup.init : { INIT_SETUP(16); }
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  .con_initcall.init : { CON_INITCALL; }
-
-  SECURITY_INIT
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
   . = ALIGN(4);
   __alt_instructions = .;
   .altinstructions : { *(.altinstructions) }
@@ -100,8 +70,6 @@ SECTIONS
 	.exit.text : { EXIT_TEXT; }
 	.exit.data : { EXIT_DATA; }
 
-  .init.ramfs : { INIT_RAM_FS; }
-
   PERCPU(32)
   . = ALIGN(PAGE_SIZE);
   __init_end = .;