[MIPS] TXx9: Reorganize code

Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree.
This will help more code sharing and maintainance.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

5 files changed, 1455 insertions, 0 deletions

diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
new file mode 100644
index 00000000000..9dcc52ae5b9
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -0,0 +1,3 @@
+obj-y	+= prom.o setup.o irq.o spi_eeprom.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
new file mode 100644
index 00000000000..f4984820251
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -0,0 +1,159 @@
+/*
+ * Toshiba RBTX4938 specific interrupt handlers
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+/*
+IRQ  Device
+
+16   TX4938-CP0/00 Software 0
+17   TX4938-CP0/01 Software 1
+18   TX4938-CP0/02 Cascade TX4938-CP0
+19   TX4938-CP0/03 Multiplexed -- do not use
+20   TX4938-CP0/04 Multiplexed -- do not use
+21   TX4938-CP0/05 Multiplexed -- do not use
+22   TX4938-CP0/06 Multiplexed -- do not use
+23   TX4938-CP0/07 CPU TIMER
+
+24   TX4938-PIC/00
+25   TX4938-PIC/01
+26   TX4938-PIC/02 Cascade RBTX4938-IOC
+27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
+28   TX4938-PIC/04
+29   TX4938-PIC/05 TX4938 ETH1
+30   TX4938-PIC/06 TX4938 ETH0
+31   TX4938-PIC/07
+32   TX4938-PIC/08 TX4938 SIO 0
+33   TX4938-PIC/09 TX4938 SIO 1
+34   TX4938-PIC/10 TX4938 DMA0
+35   TX4938-PIC/11 TX4938 DMA1
+36   TX4938-PIC/12 TX4938 DMA2
+37   TX4938-PIC/13 TX4938 DMA3
+38   TX4938-PIC/14
+39   TX4938-PIC/15
+40   TX4938-PIC/16 TX4938 PCIC
+41   TX4938-PIC/17 TX4938 TMR0
+42   TX4938-PIC/18 TX4938 TMR1
+43   TX4938-PIC/19 TX4938 TMR2
+44   TX4938-PIC/20
+45   TX4938-PIC/21
+46   TX4938-PIC/22 TX4938 PCIERR
+47   TX4938-PIC/23
+48   TX4938-PIC/24
+49   TX4938-PIC/25
+50   TX4938-PIC/26
+51   TX4938-PIC/27
+52   TX4938-PIC/28
+53   TX4938-PIC/29
+54   TX4938-PIC/30
+55   TX4938-PIC/31 TX4938 SPI
+
+56 RBTX4938-IOC/00 PCI-D
+57 RBTX4938-IOC/01 PCI-C
+58 RBTX4938-IOC/02 PCI-B
+59 RBTX4938-IOC/03 PCI-A
+60 RBTX4938-IOC/04 RTC
+61 RBTX4938-IOC/05 ATA
+62 RBTX4938-IOC/06 MODEM
+63 RBTX4938-IOC/07 SWINT
+*/
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/rbtx4938.h>
+
+static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
+
+#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
+static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
+	.name = TOSHIBA_RBTX4938_IOC_NAME,
+	.ack = toshiba_rbtx4938_irq_ioc_disable,
+	.mask = toshiba_rbtx4938_irq_ioc_disable,
+	.mask_ack = toshiba_rbtx4938_irq_ioc_disable,
+	.unmask = toshiba_rbtx4938_irq_ioc_enable,
+};
+
+int
+toshiba_rbtx4938_irq_nested(int sw_irq)
+{
+	u8 level3;
+
+	level3 = readb(rbtx4938_imstat_addr);
+	if (level3)
+		/* must use fls so onboard ATA has priority */
+		sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
+
+	return sw_irq;
+}
+
+static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
+	.handler = no_action,
+	.flags = 0,
+	.mask = CPU_MASK_NONE,
+	.name = TOSHIBA_RBTX4938_IOC_NAME,
+};
+
+/**********************************************************************************/
+/* Functions for ioc                                                              */
+/**********************************************************************************/
+static void __init
+toshiba_rbtx4938_irq_ioc_init(void)
+{
+	int i;
+
+	for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
+	     i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++)
+		set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
+					 handle_level_irq);
+
+	setup_irq(RBTX4938_IRQ_IOCINT,
+		  &toshiba_rbtx4938_irq_ioc_action);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4938_imask_addr);
+	v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	writeb(v, rbtx4938_imask_addr);
+	mmiowb();
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4938_imask_addr);
+	v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	writeb(v, rbtx4938_imask_addr);
+	mmiowb();
+}
+
+void __init arch_init_irq(void)
+{
+	extern void tx4938_irq_init(void);
+
+	/* Now, interrupt control disabled, */
+	/* all IRC interrupts are masked, */
+	/* all IRC interrupt mode are Low Active. */
+
+	/* mask all IOC interrupts */
+	writeb(0, rbtx4938_imask_addr);
+
+	/* clear SoftInt interrupts */
+	writeb(0, rbtx4938_softint_addr);
+	tx4938_irq_init();
+	toshiba_rbtx4938_irq_ioc_init();
+	/* Onboard 10M Ether: High Active */
+	set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
+}
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
new file mode 100644
index 00000000000..134fcc2dc7d
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -0,0 +1,72 @@
+/*
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/tx4938.h>
+
+void __init prom_init_cmdline(void)
+{
+	int argc = (int) fw_arg0;
+	char **argv = (char **) fw_arg1;
+	int i;
+
+	/* ignore all built-in args if any f/w args given */
+	if (argc > 1) {
+		*arcs_cmdline = '\0';
+	}
+
+	for (i = 1; i < argc; i++) {
+		if (i != 1) {
+			strcat(arcs_cmdline, " ");
+		}
+		strcat(arcs_cmdline, argv[i]);
+	}
+}
+
+void __init prom_init(void)
+{
+	extern int tx4938_get_mem_size(void);
+	int msize;
+#ifndef CONFIG_TX4938_NAND_BOOT
+	prom_init_cmdline();
+#endif
+
+	msize = tx4938_get_mem_size();
+	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+
+	return;
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+	return;
+}
+
+const char *get_system_type(void)
+{
+	return "Toshiba RBTX4938";
+}
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
new file mode 100644
index 00000000000..bbd572c9675
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -0,0 +1,1122 @@
+/*
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/txx9tmr.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/rbtx4938.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/serial_core.h>
+#endif
+#include <linux/spi/spi.h>
+#include <asm/txx9/spi.h>
+#include <asm/txx9pio.h>
+
+extern char * __init prom_getcmdline(void);
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
+
+/* These functions are used for rebooting or halting the machine*/
+extern void rbtx4938_machine_restart(char *command);
+extern void rbtx4938_machine_halt(void);
+extern void rbtx4938_machine_power_off(void);
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+unsigned long rbtx4938_ce_base[8];
+unsigned long rbtx4938_ce_size[8];
+int txboard_pci66_mode;
+static int tx4938_pcic_trdyto;	/* default: disabled */
+static int tx4938_pcic_retryto;	/* default: disabled */
+static int tx4938_ccfg_toeon = 1;
+
+struct tx4938_pcic_reg *pcicptrs[4] = {
+       tx4938_pcicptr  /* default setting for TX4938 */
+};
+
+static struct {
+	unsigned long base;
+	unsigned long size;
+} phys_regions[16] __initdata;
+static int num_phys_regions  __initdata;
+
+#define PHYS_REGION_MINSIZE	0x10000
+
+void rbtx4938_machine_halt(void)
+{
+        printk(KERN_NOTICE "System Halted\n");
+	local_irq_disable();
+
+	while (1)
+		__asm__(".set\tmips3\n\t"
+			"wait\n\t"
+			".set\tmips0");
+}
+
+void rbtx4938_machine_power_off(void)
+{
+        rbtx4938_machine_halt();
+        /* no return */
+}
+
+void rbtx4938_machine_restart(char *command)
+{
+	local_irq_disable();
+
+	printk("Rebooting...");
+	writeb(1, rbtx4938_softresetlock_addr);
+	writeb(1, rbtx4938_sfvol_addr);
+	writeb(1, rbtx4938_softreset_addr);
+	while(1)
+		;
+}
+
+void __init
+txboard_add_phys_region(unsigned long base, unsigned long size)
+{
+	if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
+		printk("phys_region overflow\n");
+		return;
+	}
+	phys_regions[num_phys_regions].base = base;
+	phys_regions[num_phys_regions].size = size;
+	num_phys_regions++;
+}
+unsigned long __init
+txboard_find_free_phys_region(unsigned long begin, unsigned long end,
+			      unsigned long size)
+{
+	unsigned long base;
+	int i;
+
+	for (base = begin / size * size; base < end; base += size) {
+		for (i = 0; i < num_phys_regions; i++) {
+			if (phys_regions[i].size &&
+			    base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
+			    base + (size - 1) >= phys_regions[i].base)
+				break;
+		}
+		if (i == num_phys_regions)
+			return base;
+	}
+	return 0;
+}
+unsigned long __init
+txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
+				     unsigned long *size)
+{
+	unsigned long sz, base;
+	for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
+		base = txboard_find_free_phys_region(begin, end, sz);
+		if (base) {
+			*size = sz;
+			return base;
+		}
+	}
+	return 0;
+}
+unsigned long __init
+txboard_request_phys_region_range(unsigned long begin, unsigned long end,
+				  unsigned long size)
+{
+	unsigned long base;
+	base = txboard_find_free_phys_region(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, size);
+	return base;
+}
+unsigned long __init
+txboard_request_phys_region(unsigned long size)
+{
+	unsigned long base;
+	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
+	base = txboard_find_free_phys_region(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, size);
+	return base;
+}
+unsigned long __init
+txboard_request_phys_region_shrink(unsigned long *size)
+{
+	unsigned long base;
+	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
+	base = txboard_find_free_phys_region_shrink(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, *size);
+	return base;
+}
+
+#ifdef CONFIG_PCI
+void __init
+tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
+		  struct pci_controller *channel,
+		  unsigned long pci_io_base,
+		  int extarb)
+{
+	int i;
+
+	/* Disable All Initiator Space */
+	pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
+			      TX4938_PCIC_PCICCFG_G2PMEN(1)|
+			      TX4938_PCIC_PCICCFG_G2PMEN(2)|
+			      TX4938_PCIC_PCICCFG_G2PIOEN);
+
+	/* GB->PCI mappings */
+	pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
+	pcicptr->g2piogbase = pci_io_base |
+#ifdef __BIG_ENDIAN
+		TX4938_PCIC_G2PIOGBASE_ECHG
+#else
+		TX4938_PCIC_G2PIOGBASE_BSDIS
+#endif
+		;
+	pcicptr->g2piopbase = 0;
+	for (i = 0; i < 3; i++) {
+		pcicptr->g2pmmask[i] = 0;
+		pcicptr->g2pmgbase[i] = 0;
+		pcicptr->g2pmpbase[i] = 0;
+	}
+	if (channel->mem_resource->end) {
+		pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
+		pcicptr->g2pmgbase[0] = channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+			TX4938_PCIC_G2PMnGBASE_ECHG
+#else
+			TX4938_PCIC_G2PMnGBASE_BSDIS
+#endif
+			;
+		pcicptr->g2pmpbase[0] = channel->mem_resource->start;
+	}
+	/* PCI->GB mappings (I/O 256B) */
+	pcicptr->p2giopbase = 0; /* 256B */
+	pcicptr->p2giogbase = 0;
+	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+	pcicptr->p2gm0plbase = 0;
+	pcicptr->p2gm0pubase = 0;
+	pcicptr->p2gmgbase[0] = 0 |
+		TX4938_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+		TX4938_PCIC_P2GMnGBASE_TECHG
+#else
+		TX4938_PCIC_P2GMnGBASE_TBSDIS
+#endif
+		;
+	/* PCI->GB mappings (MEM 16MB) */
+	pcicptr->p2gm1plbase = 0xffffffff;
+	pcicptr->p2gm1pubase = 0xffffffff;
+	pcicptr->p2gmgbase[1] = 0;
+	/* PCI->GB mappings (MEM 1MB) */
+	pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
+	pcicptr->p2gmgbase[2] = 0;
+
+	pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
+	/* Enable Initiator Memory Space */
+	if (channel->mem_resource->end)
+		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
+	/* Enable Initiator I/O Space */
+	if (channel->io_resource->end)
+		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
+	/* Enable Initiator Config */
+	pcicptr->pciccfg |=
+		TX4938_PCIC_PCICCFG_ICAEN |
+		TX4938_PCIC_PCICCFG_TCAR;
+
+	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+	pcicptr->pcicfg1 = 0;
+
+	pcicptr->g2ptocnt &= ~0xffff;
+
+	if (tx4938_pcic_trdyto >= 0) {
+		pcicptr->g2ptocnt &= ~0xff;
+		pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
+	}
+
+	if (tx4938_pcic_retryto >= 0) {
+		pcicptr->g2ptocnt &= ~0xff00;
+		pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
+	}
+
+	/* Clear All Local Bus Status */
+	pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
+	/* Enable All Local Bus Interrupts */
+	pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
+	/* Clear All Initiator Status */
+	pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
+	/* Enable All Initiator Interrupts */
+	pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
+	/* Clear All PCI Status Error */
+	pcicptr->pcistatus =
+		(pcicptr->pcistatus & 0x0000ffff) |
+		(TX4938_PCIC_PCISTATUS_ALL << 16);
+	/* Enable All PCI Status Error Interrupts */
+	pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
+
+	if (!extarb) {
+		/* Reset Bus Arbiter */
+		pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
+		pcicptr->pbabm = 0;
+		/* Enable Bus Arbiter */
+		pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
+	}
+
+      /* PCIC Int => IRC IRQ16 */
+	pcicptr->pcicfg2 =
+		    (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
+
+	pcicptr->pcistatus = PCI_COMMAND_MASTER |
+		PCI_COMMAND_MEMORY |
+		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+}
+
+int __init
+tx4938_report_pciclk(void)
+{
+	unsigned long pcode = TX4938_REV_PCODE();
+	int pciclk = 0;
+	printk("TX%lx PCIC --%s PCICLK:",
+	       pcode,
+	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+
+		switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pciclk = txx9_cpu_clock / 4; break;
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pciclk = txx9_cpu_clock * 2 / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+			pciclk = txx9_cpu_clock * 2 / 11; break;
+		case TX4938_CCFG_PCIDIVMODE_8:
+			pciclk = txx9_cpu_clock / 8; break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+			pciclk = txx9_cpu_clock / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+			pciclk = txx9_cpu_clock / 10; break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+			pciclk = txx9_cpu_clock / 11; break;
+		}
+		printk("Internal(%dMHz)", pciclk / 1000000);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
+{
+	pcicptrs[ch] = pcicptr;
+}
+
+struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
+{
+       return pcicptrs[ch];
+}
+
+static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
+                                    int top_bus, int busnr, int devfn)
+{
+	static struct pci_dev dev;
+	static struct pci_bus bus;
+
+	dev.sysdata = bus.sysdata = hose;
+	dev.devfn = devfn;
+	bus.number = busnr;
+	bus.ops = hose->pci_ops;
+	bus.parent = NULL;
+	dev.bus = &bus;
+
+	return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type)                                    \
+static int early_##rw##_config_##size(struct pci_controller *hose,      \
+        int top_bus, int bus, int devfn, int offset, type value)        \
+{                                                                       \
+        return pci_##rw##_config_##size(                                \
+                fake_pci_dev(hose, top_bus, bus, devfn),                \
+                offset, value);                                         \
+}
+
+EARLY_PCI_OP(read, word, u16 *)
+
+int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int devfn_start = 0;
+	int devfn_stop = 0xff;
+	int cap66 = -1;
+	u16 stat;
+
+	printk("PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
+		if (early_read_config_word(hose, top_bus, current_bus,
+					   pci_devfn, PCI_VENDOR_ID,
+					   &vid) != PCIBIOS_SUCCESSFUL)
+			continue;
+
+		if (vid == 0xffff) continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+					       PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+	return cap66 > 0;
+}
+
+int __init
+tx4938_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
+	/* Double PCICLK (if possible) */
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode =
+			tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4938_CCFG_PCIDIVMODE_8:
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+			pciclk = txx9_cpu_clock / 4;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+			pciclk = txx9_cpu_clock * 2 / 9;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+			pciclk = txx9_cpu_clock / 5;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+		default:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+			pciclk = txx9_cpu_clock * 2 / 11;
+			break;
+		}
+		tx4938_ccfgptr->ccfg =
+			(tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
+			| pcidivmode;
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)tx4938_ccfgptr->ccfg);
+	} else {
+		pciclk = -1;
+	}
+	return pciclk;
+}
+
+extern struct pci_controller tx4938_pci_controller[];
+static int __init tx4938_pcibios_init(void)
+{
+	unsigned long mem_base[2];
+	unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
+	unsigned long io_base[2];
+	unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
+	/* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
+	int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
+
+	PCIBIOS_MIN_IO = 0x00001000UL;
+
+	mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
+	io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
+
+	printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+	       (unsigned short)(tx4938_pcicptr->pciid >> 16),
+	       (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
+	       (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
+	       extarb ? "External" : "Internal");
+
+	/* setup PCI area */
+	tx4938_pci_controller[0].io_resource->start = io_base[0];
+	tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
+	tx4938_pci_controller[0].mem_resource->start = mem_base[0];
+	tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
+
+	set_tx4938_pcicptr(0, tx4938_pcicptr);
+
+	register_pci_controller(&tx4938_pci_controller[0]);
+
+	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
+		printk("TX4938_CCFG_PCI66 already configured\n");
+		txboard_pci66_mode = -1; /* already configured */
+	}
+
+	/* Reset PCI Bus */
+	writeb(0, rbtx4938_pcireset_addr);
+	/* Reset PCIC */
+	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+	if (txboard_pci66_mode > 0)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+	writeb(1, rbtx4938_pcireset_addr);
+	mmiowb();
+	tx4938_report_pcic_status1(tx4938_pcicptr);
+
+	tx4938_report_pciclk();
+	tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+	if (txboard_pci66_mode == 0 &&
+	    txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(0, rbtx4938_pcireset_addr);
+		/* Reset PCIC */
+		tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+		writeb(1, rbtx4938_pcireset_addr);
+		mmiowb();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+	}
+
+	mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
+	io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
+	/* Reset PCIC1 */
+	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
+	/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
+		tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
+	else
+		tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
+	mdelay(10);
+	/* clear PCIC1 reset */
+	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+	tx4938_report_pcic_status1(tx4938_pcic1ptr);
+
+	printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
+	       (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
+	       (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
+	       (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
+	printk("%s PCICLK:%dMHz\n",
+	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
+	       txx9_gbus_clock /
+	       ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
+	       1000000);
+
+	/* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
+	tx4938_pci_controller[1].io_resource->start =
+		io_base[1] - io_base[0];
+	tx4938_pci_controller[1].io_resource->end =
+		io_base[1] - io_base[0] + io_size[1] - 1;
+	tx4938_pci_controller[1].mem_resource->start = mem_base[1];
+	tx4938_pci_controller[1].mem_resource->end =
+		mem_base[1] + mem_size[1] - 1;
+	set_tx4938_pcicptr(1, tx4938_pcic1ptr);
+
+	register_pci_controller(&tx4938_pci_controller[1]);
+
+	tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
+
+	/* map ioport 0 to PCI I/O space address 0 */
+	set_io_port_base(KSEG1 + io_base[0]);
+
+	return 0;
+}
+
+arch_initcall(tx4938_pcibios_init);
+
+#endif /* CONFIG_PCI */
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define	SEEPROM1_CS	7	/* PIO7 */
+#define	SEEPROM2_CS	0	/* IOC */
+#define	SEEPROM3_CS	1	/* IOC */
+#define	SRTC_CS	2	/* IOC */
+
+#ifdef CONFIG_PCI
+static int __init rbtx4938_ethaddr_init(void)
+{
+	unsigned char dat[17];
+	unsigned char sum;
+	int i;
+
+	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+		printk(KERN_ERR "seeprom: read error.\n");
+		return -ENODEV;
+	} else {
+		if (strcmp(dat, "MAC") != 0)
+			printk(KERN_WARNING "seeprom: bad signature.\n");
+		for (i = 0, sum = 0; i < sizeof(dat); i++)
+			sum += dat[i];
+		if (sum)
+			printk(KERN_WARNING "seeprom: bad checksum.\n");
+	}
+	for (i = 0; i < 2; i++) {
+		unsigned int id =
+			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
+		struct platform_device *pdev;
+		if (!(tx4938_ccfgptr->pcfg &
+		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
+			continue;
+		pdev = platform_device_alloc("tc35815-mac", id);
+		if (!pdev ||
+		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
+		    platform_device_add(pdev))
+			platform_device_put(pdev);
+	}
+	return 0;
+}
+device_initcall(rbtx4938_ethaddr_init);
+#endif /* CONFIG_PCI */
+
+static void __init rbtx4938_spi_setup(void)
+{
+	/* set SPI_SEL */
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
+}
+
+static struct resource rbtx4938_fpga_resource;
+
+static char pcode_str[8];
+static struct resource tx4938_reg_resource = {
+	.start	= TX4938_REG_BASE,
+	.end	= TX4938_REG_BASE + TX4938_REG_SIZE,
+	.name	= pcode_str,
+	.flags	= IORESOURCE_MEM
+};
+
+void __init tx4938_board_setup(void)
+{
+	int i;
+	unsigned long divmode;
+	int cpuclk = 0;
+	unsigned long pcode = TX4938_REV_PCODE();
+
+	ioport_resource.start = 0x1000;
+	ioport_resource.end = 0xffffffff;
+	iomem_resource.start = 0x1000;
+	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
+
+	sprintf(pcode_str, "TX%lx", pcode);
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx4938_ebuscptr->cr[i] & 0x8))
+			continue;	/* disabled */
+		rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
+		txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
+	}
+
+	/* clocks */
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock_freq from master_clock */
+		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			cpuclk = txx9_gbus_clock * 9 / 2; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0) {
+			txx9_cpu_clock = 300000000;	/* 300MHz */
+		}
+		/* calculate gbus_clock and master_clock from cpu_clock_freq */
+		cpuclk = txx9_cpu_clock;
+		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = cpuclk * 2 / 9; break;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
+	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
+	/* do reset on watchdog */
+	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR;
+	/* clear PCIC1 reset */
+	if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
+		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+
+	/* enable Timeout BusError */
+	if (tx4938_ccfg_toeon)
+		tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
+
+	/* DMA selection */
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
+
+	/* Use external clock for external arbiter */
+	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
+		tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
+
+	printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
+	       pcode_str,
+	       cpuclk / 1000000, txx9_master_clock / 1000000,
+	       (unsigned long)tx4938_ccfgptr->crir,
+	       tx4938_ccfgptr->ccfg,
+	       tx4938_ccfgptr->pcfg);
+
+	printk("%s SDRAMC --", pcode_str);
+	for (i = 0; i < 4; i++) {
+		unsigned long long cr = tx4938_sdramcptr->cr[i];
+		unsigned long ram_base, ram_size;
+		if (!((unsigned long)cr & 0x00000400))
+			continue;	/* disabled */
+		ram_base = (unsigned long)(cr >> 49) << 21;
+		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
+		if (ram_base >= 0x20000000)
+			continue;	/* high memory (ignore) */
+		printk(" CR%d:%016Lx", i, cr);
+		txboard_add_phys_region(ram_base, ram_size);
+	}
+	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
+
+	/* SRAM */
+	if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
+		unsigned int size = 0x800;
+		unsigned long base =
+			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
+		 txboard_add_phys_region(base, size);
+	}
+
+	/* TMR */
+	for (i = 0; i < TX4938_NR_TMR; i++)
+		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
+
+	/* enable DMA */
+	for (i = 0; i < 2; i++)
+		____raw_writeq(TX4938_DMA_MCR_MSTEN,
+			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
+
+	/* PIO */
+	__raw_writel(0, &tx4938_pioptr->maskcpu);
+	__raw_writel(0, &tx4938_pioptr->maskext);
+
+	/* TX4938 internal registers */
+	if (request_resource(&iomem_resource, &tx4938_reg_resource))
+		printk("request resource for internal registers failed\n");
+}
+
+#ifdef CONFIG_PCI
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
+{
+	unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
+	unsigned long g2pstatus = pcicptr->g2pstatus;
+	unsigned long pcicstatus = pcicptr->pcicstatus;
+	static struct {
+		unsigned long flag;
+		const char *str;
+	} pcistat_tbl[] = {
+		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
+		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
+		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
+		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
+		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
+		{ PCI_STATUS_PARITY,	"MasterParityError" },
+	}, g2pstat_tbl[] = {
+		{ TX4938_PCIC_G2PSTATUS_TTOE,	"TIOE" },
+		{ TX4938_PCIC_G2PSTATUS_RTOE,	"RTOE" },
+	}, pcicstat_tbl[] = {
+		{ TX4938_PCIC_PCICSTATUS_PME,	"PME" },
+		{ TX4938_PCIC_PCICSTATUS_TLB,	"TLB" },
+		{ TX4938_PCIC_PCICSTATUS_NIB,	"NIB" },
+		{ TX4938_PCIC_PCICSTATUS_ZIB,	"ZIB" },
+		{ TX4938_PCIC_PCICSTATUS_PERR,	"PERR" },
+		{ TX4938_PCIC_PCICSTATUS_SERR,	"SERR" },
+		{ TX4938_PCIC_PCICSTATUS_GBE,	"GBE" },
+		{ TX4938_PCIC_PCICSTATUS_IWB,	"IWB" },
+	};
+	int i;
+
+	printk("pcistat:%04x(", pcistatus);
+	for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+		if (pcistatus & pcistat_tbl[i].flag)
+			printk("%s ", pcistat_tbl[i].str);
+	printk("), g2pstatus:%08lx(", g2pstatus);
+	for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+		if (g2pstatus & g2pstat_tbl[i].flag)
+			printk("%s ", g2pstat_tbl[i].str);
+	printk("), pcicstatus:%08lx(", pcicstatus);
+	for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+		if (pcicstatus & pcicstat_tbl[i].flag)
+			printk("%s ", pcicstat_tbl[i].str);
+	printk(")\n");
+}
+
+void tx4938_report_pcic_status(void)
+{
+	int i;
+	struct tx4938_pcic_reg *pcicptr;
+	for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
+		tx4938_report_pcic_status1(pcicptr);
+}
+
+#endif /* CONFIG_PCI */
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4938_IR_TMR(0),
+				     txx9_gbus_clock / 2);
+}
+
+void __init plat_mem_setup(void)
+{
+	unsigned long long pcfg;
+	char *argptr;
+
+	iomem_resource.end = 0xffffffff;	/* 4GB */
+
+	if (txx9_master_clock == 0)
+		txx9_master_clock = 25000000; /* 25MHz */
+	tx4938_board_setup();
+#ifndef CONFIG_PCI
+	set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)(0xff1ff300 + i * 0x100);
+			req.mapbase = 0xff1ff300 + i * 0x100;
+			req.irq = RBTX4938_IRQ_IRC_SIO(i);
+			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = 50000000;
+			early_serial_txx9_setup(&req);
+		}
+	}
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "console=") == NULL) {
+                strcat(argptr, " console=ttyS0,38400");
+        }
+#endif
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	printk("PIOSEL: disabling both ata and nand selection\n");
+	local_irq_disable();
+	tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+	printk("PIOSEL: enabling nand selection\n");
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+	printk("PIOSEL: enabling ata selection\n");
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
+#endif
+
+#ifdef CONFIG_IP_PNP
+	argptr = prom_getcmdline();
+	if (strstr(argptr, "ip=") == NULL) {
+		strcat(argptr, " ip=any");
+	}
+#endif
+
+
+#ifdef CONFIG_FB
+	{
+		conswitchp = &dummy_con;
+	}
+#endif
+
+	rbtx4938_spi_setup();
+	pcfg = tx4938_ccfgptr->pcfg;	/* updated */
+	/* fixup piosel */
+	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_ATA_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
+		       rbtx4938_piosel_addr);
+	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+		 TX4938_PCFG_NDF_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
+		       rbtx4938_piosel_addr);
+	else
+		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
+		       rbtx4938_piosel_addr);
+
+	rbtx4938_fpga_resource.name = "FPGA Registers";
+	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+		printk("request resource for fpga failed\n");
+
+	_machine_restart = rbtx4938_machine_restart;
+	_machine_halt = rbtx4938_machine_halt;
+	pm_power_off = rbtx4938_machine_power_off;
+
+	writeb(0xff, rbtx4938_led_addr);
+	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
+	       readb(rbtx4938_fpga_rev_addr),
+	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
+}
+
+static int __init rbtx4938_ne_init(void)
+{
+	struct resource res[] = {
+		{
+			.start	= RBTX4938_RTL_8019_BASE,
+			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
+			.flags	= IORESOURCE_IO,
+		}, {
+			.start	= RBTX4938_RTL_8019_IRQ,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("ne", -1,
+						res, ARRAY_SIZE(res));
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+device_initcall(rbtx4938_ne_init);
+
+/* GPIO support */
+
+int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
+
+static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
+				  int value)
+{
+	u8 val;
+	unsigned long flags;
+	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
+	val = readb(rbtx4938_spics_addr);
+	if (value)
+		val |= 1 << offset;
+	else
+		val &= ~(1 << offset);
+	writeb(val, rbtx4938_spics_addr);
+	mmiowb();
+	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
+}
+
+static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	rbtx4938_spi_gpio_set(chip, offset, value);
+	return 0;
+}
+
+static struct gpio_chip rbtx4938_spi_gpio_chip = {
+	.set = rbtx4938_spi_gpio_set,
+	.direction_output = rbtx4938_spi_gpio_dir_out,
+	.label = "RBTX4938-SPICS",
+	.base = 16,
+	.ngpio = 3,
+};
+
+/* SPI support */
+
+static void __init txx9_spi_init(unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", 0,
+					res, ARRAY_SIZE(res));
+}
+
+static int __init rbtx4938_spi_init(void)
+{
+	struct spi_board_info srtc_info = {
+		.modalias = "rtc-rs5c348",
+		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
+		.bus_num = 0,
+		.chip_select = 16 + SRTC_CS,
+		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
+		.mode = SPI_MODE_1 | SPI_CS_HIGH,
+	};
+	spi_register_board_info(&srtc_info, 1);
+	spi_eeprom_register(SEEPROM1_CS);
+	spi_eeprom_register(16 + SEEPROM2_CS);
+	spi_eeprom_register(16 + SEEPROM3_CS);
+	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
+	gpio_direction_output(16 + SRTC_CS, 0);
+	gpio_request(SEEPROM1_CS, "seeprom1");
+	gpio_direction_output(SEEPROM1_CS, 1);
+	gpio_request(16 + SEEPROM2_CS, "seeprom2");
+	gpio_direction_output(16 + SEEPROM2_CS, 1);
+	gpio_request(16 + SEEPROM3_CS, "seeprom3");
+	gpio_direction_output(16 + SEEPROM3_CS, 1);
+	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	return 0;
+}
+
+static int __init rbtx4938_arch_init(void)
+{
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
+	gpiochip_add(&rbtx4938_spi_gpio_chip);
+	return rbtx4938_spi_init();
+}
+arch_initcall(rbtx4938_arch_init);
+
+/* Watchdog support */
+
+static int __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("txx9wdt", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+
+static int __init rbtx4938_wdt_init(void)
+{
+	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+device_initcall(rbtx4938_wdt_init);
+
+/* Minimum CLK support */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "spi-baseclk"))
+		return (struct clk *)(txx9_gbus_clock / 2 / 4);
+	if (!strcmp(id, "imbus_clk"))
+		return (struct clk *)(txx9_gbus_clock / 2);
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return (unsigned long)clk;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c
new file mode 100644
index 00000000000..a7ea8b041c1
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/spi_eeprom.c
@@ -0,0 +1,99 @@
+/*
+ * spi_eeprom.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <asm/txx9/spi.h>
+
+#define AT250X0_PAGE_SIZE	8
+
+/* register board information for at25 driver */
+int __init spi_eeprom_register(int chipid)
+{
+	static struct spi_eeprom eeprom = {
+		.name = "at250x0",
+		.byte_len = 128,
+		.page_size = AT250X0_PAGE_SIZE,
+		.flags = EE_ADDR1,
+	};
+	struct spi_board_info info = {
+		.modalias = "at25",
+		.max_speed_hz = 1500000,	/* 1.5Mbps */
+		.bus_num = 0,
+		.chip_select = chipid,
+		.platform_data = &eeprom,
+		/* Mode 0: High-Active, Sample-Then-Shift */
+	};
+
+	return spi_register_board_info(&info, 1);
+}
+
+/* simple temporary spi driver to provide early access to seeprom. */
+
+static struct read_param {
+	int chipid;
+	int address;
+	unsigned char *buf;
+	int len;
+} *read_param;
+
+static int __init early_seeprom_probe(struct spi_device *spi)
+{
+	int stat = 0;
+	u8 cmd[2];
+	int len = read_param->len;
+	char *buf = read_param->buf;
+	int address = read_param->address;
+
+	dev_info(&spi->dev, "spiclk %u KHz.\n",
+		 (spi->max_speed_hz + 500) / 1000);
+	if (read_param->chipid != spi->chip_select)
+		return -ENODEV;
+	while (len > 0) {
+		/* spi_write_then_read can only work with small chunk */
+		int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
+		cmd[0] = 0x03;	/* AT25_READ */
+		cmd[1] = address;
+		stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
+		buf += c;
+		len -= c;
+		address += c;
+	}
+	return stat;
+}
+
+static struct spi_driver early_seeprom_driver __initdata = {
+	.driver = {
+		.name	= "at25",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= early_seeprom_probe,
+};
+
+int __init spi_eeprom_read(int chipid, int address,
+			   unsigned char *buf, int len)
+{
+	int ret;
+	struct read_param param = {
+		.chipid = chipid,
+		.address = address,
+		.buf = buf,
+		.len = len
+	};
+
+	read_param = &param;
+	ret = spi_register_driver(&early_seeprom_driver);
+	if (!ret)
+		spi_unregister_driver(&early_seeprom_driver);
+	return ret;
+}