Merge branch 'linus' into x86/xen

Conflicts:
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/process_64.c
	arch/x86/xen/enlighten.c

5 files changed, 60 insertions, 115 deletions

diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
index 9dcc52ae5b9..f3e1f597b4f 100644
--- a/arch/mips/txx9/rbtx4938/Makefile
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -1,3 +1,3 @@
-obj-y	+= prom.o setup.o irq.o spi_eeprom.o
+obj-y	+= prom.o setup.o irq.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index ca2f8306ce9..7d21befb893 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -85,10 +85,10 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
 	u8 level3;
 
 	level3 = readb(rbtx4938_imstat_addr);
-	if (level3)
-		/* must use fls so onboard ATA has priority */
-		sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
-	return sw_irq;
+	if (unlikely(!level3))
+		return -1;
+	/* must use fls so onboard ATA has priority */
+	return RBTX4938_IRQ_IOC + __fls8(level3);
 }
 
 static void __init
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index d73123cd2ab..bcb469247e8 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -18,9 +18,6 @@
 
 void __init rbtx4938_prom_init(void)
 {
-#ifndef CONFIG_TX4938_NAND_BOOT
-	prom_init_cmdline();
-#endif
 	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
 	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 9ab48dec0fe..e077cc4d3a5 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/reboot.h>
 #include <asm/io.h>
@@ -110,6 +111,7 @@ static void __init rbtx4938_pci_setup(void)
 #define	SEEPROM2_CS	0	/* IOC */
 #define	SEEPROM3_CS	1	/* IOC */
 #define	SRTC_CS	2	/* IOC */
+#define SPI_BUSNO	0
 
 static int __init rbtx4938_ethaddr_init(void)
 {
@@ -119,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void)
 	int i;
 
 	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
-	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+	if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
 		printk(KERN_ERR "seeprom: read error.\n");
 		return -ENODEV;
 	} else {
@@ -173,23 +175,30 @@ static void __init rbtx4938_mem_setup(void)
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
+	pr_info("PIOSEL: disabling both ATA and NAND selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
+	pr_info("PIOSEL: enabling NAND selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
+	pr_info("PIOSEL: enabling ATA selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
+	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+	pr_info("PIOSEL: NAND %s, ATA %s\n",
+		(pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
+		(pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
+#endif
+
 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
@@ -279,9 +288,9 @@ static int __init rbtx4938_spi_init(void)
 		.mode = SPI_MODE_1 | SPI_CS_HIGH,
 	};
 	spi_register_board_info(&srtc_info, 1);
-	spi_eeprom_register(SEEPROM1_CS);
-	spi_eeprom_register(16 + SEEPROM2_CS);
-	spi_eeprom_register(16 + SEEPROM3_CS);
+	spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
+	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
+	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
 	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
 	gpio_direction_output(16 + SRTC_CS, 0);
 	gpio_request(SEEPROM1_CS, "seeprom1");
@@ -290,10 +299,46 @@ static int __init rbtx4938_spi_init(void)
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	tx4938_spi_init(0);
+	tx4938_spi_init(SPI_BUSNO);
 	return 0;
 }
 
+static void __init rbtx4938_mtd_init(void)
+{
+	struct physmap_flash_data pdata = {
+		.width = 4,
+	};
+
+	switch (readb(rbtx4938_bdipsw_addr) & 7) {
+	case 0:
+		/* Boot */
+		txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
+		/* System */
+		txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+		break;
+	case 1:
+		/* System */
+		txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+		/* Boot */
+		txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
+		break;
+	case 2:
+		/* Ext */
+		txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+		/* System */
+		txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+		/* Boot */
+		txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
+		break;
+	case 3:
+		/* Boot */
+		txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
+		/* System */
+		txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
+		break;
+	}
+}
+
 static void __init rbtx4938_arch_init(void)
 {
 	gpiochip_add(&rbtx4938_spi_gpio_chip);
@@ -306,6 +351,8 @@ static void __init rbtx4938_device_init(void)
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
 	tx4938_wdt_init();
+	rbtx4938_mtd_init();
+	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c
deleted file mode 100644
index a7ea8b041c1..00000000000
--- a/arch/mips/txx9/rbtx4938/spi_eeprom.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * spi_eeprom.c
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <asm/txx9/spi.h>
-
-#define AT250X0_PAGE_SIZE	8
-
-/* register board information for at25 driver */
-int __init spi_eeprom_register(int chipid)
-{
-	static struct spi_eeprom eeprom = {
-		.name = "at250x0",
-		.byte_len = 128,
-		.page_size = AT250X0_PAGE_SIZE,
-		.flags = EE_ADDR1,
-	};
-	struct spi_board_info info = {
-		.modalias = "at25",
-		.max_speed_hz = 1500000,	/* 1.5Mbps */
-		.bus_num = 0,
-		.chip_select = chipid,
-		.platform_data = &eeprom,
-		/* Mode 0: High-Active, Sample-Then-Shift */
-	};
-
-	return spi_register_board_info(&info, 1);
-}
-
-/* simple temporary spi driver to provide early access to seeprom. */
-
-static struct read_param {
-	int chipid;
-	int address;
-	unsigned char *buf;
-	int len;
-} *read_param;
-
-static int __init early_seeprom_probe(struct spi_device *spi)
-{
-	int stat = 0;
-	u8 cmd[2];
-	int len = read_param->len;
-	char *buf = read_param->buf;
-	int address = read_param->address;
-
-	dev_info(&spi->dev, "spiclk %u KHz.\n",
-		 (spi->max_speed_hz + 500) / 1000);
-	if (read_param->chipid != spi->chip_select)
-		return -ENODEV;
-	while (len > 0) {
-		/* spi_write_then_read can only work with small chunk */
-		int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
-		cmd[0] = 0x03;	/* AT25_READ */
-		cmd[1] = address;
-		stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
-		buf += c;
-		len -= c;
-		address += c;
-	}
-	return stat;
-}
-
-static struct spi_driver early_seeprom_driver __initdata = {
-	.driver = {
-		.name	= "at25",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= early_seeprom_probe,
-};
-
-int __init spi_eeprom_read(int chipid, int address,
-			   unsigned char *buf, int len)
-{
-	int ret;
-	struct read_param param = {
-		.chipid = chipid,
-		.address = address,
-		.buf = buf,
-		.len = len
-	};
-
-	read_param = &param;
-	ret = spi_register_driver(&early_seeprom_driver);
-	if (!ret)
-		spi_unregister_driver(&early_seeprom_driver);
-	return ret;
-}