MIPS: PowerTV: Base files for Cisco PowerTV platform

Add the Cisco Powertv cable settop box to the MIPS tree. This platform is
based on a MIPS 24Kc processor with various devices integrated on the same
ASIC. There are multiple models of this box, with differing configuration
but the same kernel runs across the product line.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/132/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

26 files changed, 4386 insertions, 0 deletions

diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig
new file mode 100644
index 00000000000..ff0e7e3e695
--- /dev/null
+++ b/arch/mips/powertv/Kconfig
@@ -0,0 +1,21 @@
+source "arch/mips/powertv/asic/Kconfig"
+
+config BOOTLOADER_DRIVER
+	bool "PowerTV Bootloader Driver Support"
+	default n
+	depends on POWERTV
+	help
+	  Use this option if you want to load bootloader driver.
+
+config BOOTLOADER_FAMILY
+	string "POWERTV Bootloader Family string"
+	default "85"
+	depends on POWERTV && !BOOTLOADER_DRIVER
+	help
+	  This value should be specified when the bootloader driver is disabled
+	  and must be exactly two characters long. Families supported are:
+	    R1 - RNG-100  R2 - RNG-200
+	    A1 - Class A  B1 - Class B
+	    E1 - Class E  F1 - Class F
+	    44 - 45xx     46 - 46xx
+	    85 - 85xx     86 - 86xx
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
new file mode 100644
index 00000000000..2c516718aff
--- /dev/null
+++ b/arch/mips/powertv/Makefile
@@ -0,0 +1,28 @@
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+# Portions copyright (C)  2009 Cisco Systems, Inc.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Makefile for the Cisco PowerTV-specific kernel interface routines
+# under Linux.
+#
+
+obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+
+EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/asic/Kconfig b/arch/mips/powertv/asic/Kconfig
new file mode 100644
index 00000000000..2016bfe94d6
--- /dev/null
+++ b/arch/mips/powertv/asic/Kconfig
@@ -0,0 +1,28 @@
+config MIN_RUNTIME_RESOURCES
+	bool "Support for minimum runtime resources"
+	default n
+	depends on POWERTV
+	help
+	  Enables support for minimizing the number of (SA asic) runtime
+	  resources that are preallocated by the kernel.
+
+config MIN_RUNTIME_DOCSIS
+	bool "Support for minimum DOCSIS resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated DOCSIS resource.
+
+config MIN_RUNTIME_PMEM
+	bool "Support for minimum PMEM resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated Memory resource.
+
+config MIN_RUNTIME_TFTP
+	bool "Support for minimum TFTP resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated TFTP resource.
diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile
new file mode 100644
index 00000000000..bebfdcff044
--- /dev/null
+++ b/arch/mips/powertv/asic/Makefile
@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2009  Scientific-Atlanta, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+
+obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \
+	 irq_asic.o prealloc-calliope.o prealloc-cronus.o \
+	 prealloc-cronuslite.o prealloc-zeus.o
+
+EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
new file mode 100644
index 00000000000..03d3884c627
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -0,0 +1,98 @@
+/*
+ * Locations of devices in the Calliope ASIC.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map calliope_register_map = {
+	.eic_slow0_strt_add = 0x800000,
+	.eic_cfg_bits = 0x800038,
+	.eic_ready_status = 0x80004c,
+
+	.chipver3 = 0xA00800,
+	.chipver2 = 0xA00804,
+	.chipver1 = 0xA00808,
+	.chipver0 = 0xA0080c,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0xA01800,
+	.uart1_inten = 0xA01804,
+	.uart1_config1 = 0xA01808,
+	.uart1_config2 = 0xA0180C,
+	.uart1_divisorhi = 0xA01810,
+	.uart1_divisorlo = 0xA01814,
+	.uart1_data = 0xA01818,
+	.uart1_status = 0xA0181C,
+
+	.int_stat_3 = 0xA02800,
+	.int_stat_2 = 0xA02804,
+	.int_stat_1 = 0xA02808,
+	.int_stat_0 = 0xA0280c,
+	.int_config = 0xA02810,
+	.int_int_scan = 0xA02818,
+	.ien_int_3 = 0xA02830,
+	.ien_int_2 = 0xA02834,
+	.ien_int_1 = 0xA02838,
+	.ien_int_0 = 0xA0283c,
+	.int_level_3_3 = 0xA02880,
+	.int_level_3_2 = 0xA02884,
+	.int_level_3_1 = 0xA02888,
+	.int_level_3_0 = 0xA0288c,
+	.int_level_2_3 = 0xA02890,
+	.int_level_2_2 = 0xA02894,
+	.int_level_2_1 = 0xA02898,
+	.int_level_2_0 = 0xA0289c,
+	.int_level_1_3 = 0xA028a0,
+	.int_level_1_2 = 0xA028a4,
+	.int_level_1_1 = 0xA028a8,
+	.int_level_1_0 = 0xA028ac,
+	.int_level_0_3 = 0xA028b0,
+	.int_level_0_2 = 0xA028b4,
+	.int_level_0_1 = 0xA028b8,
+	.int_level_0_0 = 0xA028bc,
+	.int_docsis_en = 0xA028F4,
+
+	.mips_pll_setup = 0x980000,
+	.usb_fs = 0x980030,     	/* -default 72800028- */
+	.test_bus = 0x9800CC,
+	.crt_spare = 0x9800d4,
+	.usb2_ohci_int_mask = 0x9A000c,
+	.usb2_strap = 0x9A0014,
+	.ehci_hcapbase = 0x9BFE00,
+	.ohci_hc_revision = 0x9BFC00,
+	.bcm1_bs_lmi_steer = 0x9E0004,
+	.usb2_control = 0x9E0054,
+	.usb2_stbus_obc = 0x9BFF00,
+	.usb2_stbus_mess_size = 0x9BFF04,
+	.usb2_stbus_chunk_size = 0x9BFF08,
+
+	.pcie_regs = 0x000000,      	/* -doesn't exist- */
+	.tim_ch = 0xA02C10,
+	.tim_cl = 0xA02C14,
+	.gpio_dout = 0xA02c20,
+	.gpio_din = 0xA02c24,
+	.gpio_dir = 0xA02c2C,
+	.watchdog = 0xA02c30,
+	.front_panel = 0x000000,    	/* -not used- */
+};
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
new file mode 100644
index 00000000000..5f4589c9f83
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -0,0 +1,98 @@
+/*
+ * Locations of devices in the Cronus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map cronus_register_map = {
+	.eic_slow0_strt_add = 0x000000,
+	.eic_cfg_bits = 0x000038,
+	.eic_ready_status = 0x00004C,
+
+	.chipver3 = 0x2A0800,
+	.chipver2 = 0x2A0804,
+	.chipver1 = 0x2A0808,
+	.chipver0 = 0x2A080C,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0x2A1800,
+	.uart1_inten = 0x2A1804,
+	.uart1_config1 = 0x2A1808,
+	.uart1_config2 = 0x2A180C,
+	.uart1_divisorhi = 0x2A1810,
+	.uart1_divisorlo = 0x2A1814,
+	.uart1_data = 0x2A1818,
+	.uart1_status = 0x2A181C,
+
+	.int_stat_3 = 0x2A2800,
+	.int_stat_2 = 0x2A2804,
+	.int_stat_1 = 0x2A2808,
+	.int_stat_0 = 0x2A280C,
+	.int_config = 0x2A2810,
+	.int_int_scan = 0x2A2818,
+	.ien_int_3 = 0x2A2830,
+	.ien_int_2 = 0x2A2834,
+	.ien_int_1 = 0x2A2838,
+	.ien_int_0 = 0x2A283C,
+	.int_level_3_3 = 0x2A2880,
+	.int_level_3_2 = 0x2A2884,
+	.int_level_3_1 = 0x2A2888,
+	.int_level_3_0 = 0x2A288C,
+	.int_level_2_3 = 0x2A2890,
+	.int_level_2_2 = 0x2A2894,
+	.int_level_2_1 = 0x2A2898,
+	.int_level_2_0 = 0x2A289C,
+	.int_level_1_3 = 0x2A28A0,
+	.int_level_1_2 = 0x2A28A4,
+	.int_level_1_1 = 0x2A28A8,
+	.int_level_1_0 = 0x2A28AC,
+	.int_level_0_3 = 0x2A28B0,
+	.int_level_0_2 = 0x2A28B4,
+	.int_level_0_1 = 0x2A28B8,
+	.int_level_0_0 = 0x2A28BC,
+	.int_docsis_en = 0x2A28F4,
+
+	.mips_pll_setup = 0x1C0000,
+	.usb_fs = 0x1C0018,
+	.test_bus = 0x1C00CC,
+	.crt_spare = 0x1c00d4,
+	.usb2_ohci_int_mask = 0x20000C,
+	.usb2_strap = 0x200014,
+	.ehci_hcapbase = 0x21FE00,
+	.ohci_hc_revision = 0x1E0000,
+	.bcm1_bs_lmi_steer = 0x2E0008,
+	.usb2_control = 0x2E004C,
+	.usb2_stbus_obc = 0x21FF00,
+	.usb2_stbus_mess_size = 0x21FF04,
+	.usb2_stbus_chunk_size = 0x21FF08,
+
+	.pcie_regs = 0x220000,
+	.tim_ch = 0x2A2C10,
+	.tim_cl = 0x2A2C14,
+	.gpio_dout = 0x2A2C20,
+	.gpio_din = 0x2A2C24,
+	.gpio_dir = 0x2A2C2C,
+	.watchdog = 0x2A2C30,
+	.front_panel = 0x2A3800,
+};
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
new file mode 100644
index 00000000000..1469daab920
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -0,0 +1,98 @@
+/*
+ * Locations of devices in the Zeus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map zeus_register_map = {
+	.eic_slow0_strt_add = 0x000000,
+	.eic_cfg_bits = 0x000038,
+	.eic_ready_status = 0x00004c,
+
+	.chipver3 = 0x280800,
+	.chipver2 = 0x280804,
+	.chipver1 = 0x280808,
+	.chipver0 = 0x28080c,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0x281800,
+	.uart1_inten = 0x281804,
+	.uart1_config1 = 0x281808,
+	.uart1_config2 = 0x28180C,
+	.uart1_divisorhi = 0x281810,
+	.uart1_divisorlo = 0x281814,
+	.uart1_data = 0x281818,
+	.uart1_status = 0x28181C,
+
+	.int_stat_3 = 0x282800,
+	.int_stat_2 = 0x282804,
+	.int_stat_1 = 0x282808,
+	.int_stat_0 = 0x28280c,
+	.int_config = 0x282810,
+	.int_int_scan = 0x282818,
+	.ien_int_3 = 0x282830,
+	.ien_int_2 = 0x282834,
+	.ien_int_1 = 0x282838,
+	.ien_int_0 = 0x28283c,
+	.int_level_3_3 = 0x282880,
+	.int_level_3_2 = 0x282884,
+	.int_level_3_1 = 0x282888,
+	.int_level_3_0 = 0x28288c,
+	.int_level_2_3 = 0x282890,
+	.int_level_2_2 = 0x282894,
+	.int_level_2_1 = 0x282898,
+	.int_level_2_0 = 0x28289c,
+	.int_level_1_3 = 0x2828a0,
+	.int_level_1_2 = 0x2828a4,
+	.int_level_1_1 = 0x2828a8,
+	.int_level_1_0 = 0x2828ac,
+	.int_level_0_3 = 0x2828b0,
+	.int_level_0_2 = 0x2828b4,
+	.int_level_0_1 = 0x2828b8,
+	.int_level_0_0 = 0x2828bc,
+	.int_docsis_en = 0x2828F4,
+
+	.mips_pll_setup = 0x1a0000,
+	.usb_fs = 0x1a0018,
+	.test_bus = 0x1a0238,
+	.crt_spare = 0x1a0090,
+	.usb2_ohci_int_mask = 0x1e000c,
+	.usb2_strap = 0x1e0014,
+	.ehci_hcapbase = 0x1FFE00,
+	.ohci_hc_revision = 0x1FFC00,
+	.bcm1_bs_lmi_steer = 0x2C0008,
+	.usb2_control = 0x2c01a0,
+	.usb2_stbus_obc = 0x1FFF00,
+	.usb2_stbus_mess_size = 0x1FFF04,
+	.usb2_stbus_chunk_size = 0x1FFF08,
+
+	.pcie_regs = 0x200000,
+	.tim_ch = 0x282C10,
+	.tim_cl = 0x282C14,
+	.gpio_dout = 0x282c20,
+	.gpio_din = 0x282c24,
+	.gpio_dir = 0x282c2C,
+	.watchdog = 0x282c30,
+	.front_panel = 0x283800,
+};
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
new file mode 100644
index 00000000000..bae82880b6b
--- /dev/null
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -0,0 +1,787 @@
+/*
+ *                   ASIC Device List Intialization
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ *
+ * NOTE: The bootloader allocates persistent memory at an address which is
+ * 16 MiB below the end of the highest address in KSEG0. All fixed
+ * address memory reservations must avoid this region.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial_reg.h>
+#include <linux/io.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <asm/page.h>
+#include <linux/swap.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-powertv/asic.h>
+#include <asm/mach-powertv/asic_regs.h>
+#include <asm/mach-powertv/interrupts.h>
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+#include <asm/mach-powertv/kbldr.h>
+#endif
+#include <asm/bootinfo.h>
+
+#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
+
+/*
+ * Forward Prototypes
+ */
+static void pmem_setup_resource(void);
+
+/*
+ * Global Variables
+ */
+enum asic_type asic;
+
+unsigned int platform_features;
+unsigned int platform_family;
+const struct register_map  *register_map;
+EXPORT_SYMBOL(register_map);			/* Exported for testing */
+unsigned long asic_phy_base;
+unsigned long asic_base;
+EXPORT_SYMBOL(asic_base);			/* Exported for testing */
+struct resource *gp_resources;
+static bool usb_configured;
+
+/*
+ * Don't recommend to use it directly, it is usually used by kernel internally.
+ * Portable code should be using interfaces such as ioremp, dma_map_single, etc.
+ */
+unsigned long phys_to_bus_offset;
+EXPORT_SYMBOL(phys_to_bus_offset);
+
+/*
+ *
+ * IO Resource Definition
+ *
+ */
+
+struct resource asic_resource = {
+	.name  = "ASIC Resource",
+	.start = 0,
+	.end   = ASIC_IO_SIZE,
+	.flags = IORESOURCE_MEM,
+};
+
+/*
+ *
+ * USB Host Resource Definition
+ *
+ */
+
+static struct resource ehci_resources[] = {
+	{
+		.parent = &asic_resource,
+		.start  = 0,
+		.end    = 0xff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = irq_usbehci,
+		.end    = irq_usbehci,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device ehci_device = {
+	.name = "powertv-ehci",
+	.id = 0,
+	.num_resources = 2,
+	.resource = ehci_resources,
+	.dev = {
+		.dma_mask = &ehci_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource ohci_resources[] = {
+	{
+		.parent = &asic_resource,
+		.start  = 0,
+		.end    = 0xff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = irq_usbohci,
+		.end    = irq_usbohci,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device ohci_device = {
+	.name = "powertv-ohci",
+	.id = 0,
+	.num_resources = 2,
+	.resource = ohci_resources,
+	.dev = {
+		.dma_mask = &ohci_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct platform_device *platform_devices[] = {
+	&ehci_device,
+	&ohci_device,
+};
+
+/*
+ *
+ * Platform Configuration and Device Initialization
+ *
+ */
+static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3)
+{
+	int en_prg, byp, pwr, nsb, val;
+	int sout;
+
+	sout = 1;
+	en_prg = 1;
+	byp = 0;
+	nsb = 1;
+	pwr = 1;
+
+	val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) |
+		(nsb<<1) | (disable_div_by_3<<5));
+
+	asic_write(val, usb_fs);
+	asic_write(val | (en_prg<<4), usb_fs);
+	asic_write(val | (en_prg<<4) | pwr, usb_fs);
+}
+
+/*
+ * Allow override of bootloader-specified model
+ */
+static char __initdata cmdline[COMMAND_LINE_SIZE];
+
+#define	FORCEFAMILY_PARAM	"forcefamily"
+
+static __init int check_forcefamily(unsigned char forced_family[2])
+{
+	const char *p;
+
+	forced_family[0] = '\0';
+	forced_family[1] = '\0';
+
+	/* Check the command line for a forcefamily directive */
+	strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1);
+	p = strstr(cmdline, FORCEFAMILY_PARAM);
+	if (p && (p != cmdline) && (*(p - 1) != ' '))
+		p = strstr(p, " " FORCEFAMILY_PARAM "=");
+
+	if (p) {
+		p += strlen(FORCEFAMILY_PARAM "=");
+
+		if (*p == '\0' || *(p + 1) == '\0' ||
+			(*(p + 2) != '\0' && *(p + 2) != ' '))
+			pr_err(FORCEFAMILY_PARAM " must be exactly two "
+				"characters long, ignoring value\n");
+
+		else {
+			forced_family[0] = *p;
+			forced_family[1] = *(p + 1);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * platform_set_family - determine major platform family type.
+ *
+ * Returns family type; -1 if none
+ * Returns the family type; -1 if none
+ *
+ */
+static __init noinline void platform_set_family(void)
+{
+#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
+
+	unsigned char forced_family[2];
+	unsigned short bootldr_family;
+
+	check_forcefamily(forced_family);
+
+	if (forced_family[0] != '\0' && forced_family[1] != '\0')
+		bootldr_family = BOOTLDRFAMILY(forced_family[0],
+			forced_family[1]);
+	else {
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+		bootldr_family = (unsigned short) kbldr_GetSWFamily();
+#else
+#if defined(CONFIG_BOOTLOADER_FAMILY)
+		bootldr_family = (unsigned short) BOOTLDRFAMILY(
+			CONFIG_BOOTLOADER_FAMILY[0],
+			CONFIG_BOOTLOADER_FAMILY[1]);
+#else
+#error "Unknown Bootloader Family"
+#endif
+#endif
+	}
+
+	pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
+
+	switch (bootldr_family) {
+	case BOOTLDRFAMILY('R', '1'):
+		platform_family = FAMILY_1500;
+		break;
+	case BOOTLDRFAMILY('4', '4'):
+		platform_family = FAMILY_4500;
+		break;
+	case BOOTLDRFAMILY('4', '6'):
+		platform_family = FAMILY_4600;
+		break;
+	case BOOTLDRFAMILY('A', '1'):
+		platform_family = FAMILY_4600VZA;
+		break;
+	case BOOTLDRFAMILY('8', '5'):
+		platform_family = FAMILY_8500;
+		break;
+	case BOOTLDRFAMILY('R', '2'):
+		platform_family = FAMILY_8500RNG;
+		break;
+	case BOOTLDRFAMILY('8', '6'):
+		platform_family = FAMILY_8600;
+		break;
+	case BOOTLDRFAMILY('B', '1'):
+		platform_family = FAMILY_8600VZB;
+		break;
+	case BOOTLDRFAMILY('E', '1'):
+		platform_family = FAMILY_1500VZE;
+		break;
+	case BOOTLDRFAMILY('F', '1'):
+		platform_family = FAMILY_1500VZF;
+		break;
+	default:
+		platform_family = -1;
+	}
+}
+
+unsigned int platform_get_family(void)
+{
+	return platform_family;
+}
+EXPORT_SYMBOL(platform_get_family);
+
+/*
+ * \brief usb_eye_configure() for optimizing the USB eye on Calliope.
+ *
+ * \param     unsigned int value saved to the register.
+ *
+ * \return    none
+ *
+ */
+static void __init usb_eye_configure(unsigned int value)
+{
+	asic_write(asic_read(crt_spare) | value, crt_spare);
+}
+
+/*
+ * platform_get_asic - determine the ASIC type.
+ *
+ * \param     none
+ *
+ * \return    ASIC type; ASIC_UNKNOWN if none
+ *
+ */
+enum asic_type platform_get_asic(void)
+{
+	return asic;
+}
+EXPORT_SYMBOL(platform_get_asic);
+
+/*
+ * platform_configure_usb - usb configuration based on platform type.
+ * @bcm1_usb2_ctl:	value for the BCM1_USB2_CTL register, which is
+ *			quirky
+ */
+static void __init platform_configure_usb(void)
+{
+	u32 bcm1_usb2_ctl;
+
+	if (usb_configured)
+		return;
+
+	switch (asic) {
+	case ASIC_ZEUS:
+		fs_update(0x0000, 0x11, 0x02, 0);
+		bcm1_usb2_ctl = 0x803;
+		break;
+
+	case ASIC_CRONUS:
+	case ASIC_CRONUSLITE:
+		fs_update(0x0000, 0x11, 0x02, 0);
+		bcm1_usb2_ctl = 0x803;
+		break;
+
+	case ASIC_CALLIOPE:
+		fs_update(0x0000, 0x11, 0x02, 1);
+
+		switch (platform_family) {
+		case FAMILY_1500VZE:
+			break;
+
+		case FAMILY_1500VZF:
+			usb_eye_configure(0x003c0000);
+			break;
+
+		default:
+			usb_eye_configure(0x00300000);
+			break;
+		}
+
+		bcm1_usb2_ctl = 0x803;
+		break;
+
+	default:
+		pr_err("Unknown ASIC type: %d\n", asic);
+		break;
+	}
+
+	/* turn on USB power */
+	asic_write(0, usb2_strap);
+	/* Enable all OHCI interrupts */
+	asic_write(bcm1_usb2_ctl, usb2_control);
+	/* USB2_STBUS_OBC store32/load32 */
+	asic_write(3, usb2_stbus_obc);
+	/* USB2_STBUS_MESS_SIZE 2 packets */
+	asic_write(1, usb2_stbus_mess_size);
+	/* USB2_STBUS_CHUNK_SIZE 2 packets */
+	asic_write(1, usb2_stbus_chunk_size);
+
+	usb_configured = true;
+}
+
+/*
+ * Set up the USB EHCI interface
+ */
+void platform_configure_usb_ehci()
+{
+	platform_configure_usb();
+}
+
+/*
+ * Set up the USB OHCI interface
+ */
+void platform_configure_usb_ohci()
+{
+	platform_configure_usb();
+}
+
+/*
+ * Shut the USB EHCI interface down--currently a NOP
+ */
+void platform_unconfigure_usb_ehci()
+{
+}
+
+/*
+ * Shut the USB OHCI interface down--currently a NOP
+ */
+void platform_unconfigure_usb_ohci()
+{
+}
+
+/**
+ * configure_platform - configuration based on platform type.
+ */
+void __init configure_platform(void)
+{
+	platform_set_family();
+
+	switch (platform_family) {
+	case FAMILY_1500:
+	case FAMILY_1500VZE:
+	case FAMILY_1500VZF:
+		platform_features = FFS_CAPABLE;
+		asic = ASIC_CALLIOPE;
+		asic_phy_base = CALLIOPE_IO_BASE;
+		register_map = &calliope_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+
+		if (platform_family == FAMILY_1500VZE) {
+			gp_resources = non_dvr_vze_calliope_resources;
+			pr_info("Platform: 1500/Vz Class E - "
+				"CALLIOPE, NON_DVR_CAPABLE\n");
+		} else if (platform_family == FAMILY_1500VZF) {
+			gp_resources = non_dvr_vzf_calliope_resources;
+			pr_info("Platform: 1500/Vz Class F - "
+				"CALLIOPE, NON_DVR_CAPABLE\n");
+		} else {
+			gp_resources = non_dvr_calliope_resources;
+			pr_info("Platform: 1500/RNG100 - CALLIOPE, "
+				"NON_DVR_CAPABLE\n");
+		}
+		break;
+
+	case FAMILY_4500:
+		platform_features = FFS_CAPABLE | PCIE_CAPABLE |
+			DISPLAY_CAPABLE;
+		asic = ASIC_ZEUS;
+		asic_phy_base = ZEUS_IO_BASE;
+		register_map = &zeus_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = non_dvr_zeus_resources;
+
+		pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
+		break;
+
+	case FAMILY_4600:
+	{
+		unsigned int chipversion = 0;
+
+		/* The settop has PCIE but it isn't used, so don't advertise
+		 * it*/
+		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+		asic_phy_base = CRONUS_IO_BASE;   /* same as Cronus */
+		register_map = &cronus_register_map;   /* same as Cronus */
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = non_dvr_cronuslite_resources;
+
+		/* ASIC version will determine if this is a real CronusLite or
+		 * Castrati(Cronus) */
+		chipversion  = asic_read(chipver3) << 24;
+		chipversion |= asic_read(chipver2) << 16;
+		chipversion |= asic_read(chipver1) << 8;
+		chipversion |= asic_read(chipver0);
+
+		if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11))
+			asic = ASIC_CRONUS;
+		else
+			asic = ASIC_CRONUSLITE;
+
+		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
+			"chipversion=0x%08X\n",
+			(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
+			chipversion);
+		break;
+	}
+	case FAMILY_4600VZA:
+		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+		asic = ASIC_CRONUS;
+		asic_phy_base = CRONUS_IO_BASE;
+		register_map = &cronus_register_map;
+		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+			ASIC_IO_SIZE);
+		gp_resources = non_dvr_cronus_resources;
+
+