MIPS: Netlogic: Merge some of XLR/XLP wakup code

Create a common NMI and reset handler in smpboot.S and use this for
both XLR and XLP.  In the earlier code, the woken up CPUs would
busy wait until released, switch this to wakeup by NMI.

The initial wakeup code or XLR and XLP are differ since they are
started from different bootloaders (XLP from u-boot and XLR from
netlogic bootloader). But in both platforms the woken up CPUs wait
and are released by sending an NMI.

Add support for starting XLR and XLP in 1/2/4 threads per core.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2970/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 272 insertions, 0 deletions

diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
new file mode 100644
index 00000000000..c138b1a6dec
--- /dev/null
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -0,0 +1,272 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/asmmacro.h>
+#include <asm/addrspace.h>
+
+#include <asm/netlogic/common.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+#include <asm/netlogic/xlp-hal/cpucontrol.h>
+
+#define	CP0_EBASE	$15
+#define SYS_CPU_COHERENT_BASE(node)	CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
+			XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
+			SYS_CPU_NONCOHERENT_MODE * 4
+
+.macro __config_lsu
+	li      t0, LSU_DEFEATURE
+	mfcr    t1, t0
+
+	lui     t2, 0x4080  /* Enable Unaligned Access, L2HPE */
+	or      t1, t1, t2
+	li	t2, ~0xe    /* S1RCM */
+	and	t1, t1, t2
+	mtcr    t1, t0
+
+	li      t0, SCHED_DEFEATURE
+	lui     t1, 0x0100  /* Experimental: Disable BRU accepting ALU ops */
+	mtcr    t1, t0
+.endm
+
+/*
+ * The cores can come start when they are woken up. This is also the NMI
+ * entry, so check that first.
+ *
+ * The data corresponding to reset is stored at RESET_DATA_PHYS location,
+ * this will have the thread mask (used when core is woken up) and the
+ * current NMI handler in case we reached here for an NMI.
+ *
+ * When a core or thread is newly woken up, it loops in a 'wait'. When
+ * the CPU really needs waking up, we send an NMI to it, with the NMI
+ * handler set to prom_boot_secondary_cpus
+ */
+
+	.set	noreorder
+	.set	noat
+	.set	arch=xlr	/* for mfcr/mtcr, XLR is sufficient */
+
+FEXPORT(nlm_reset_entry)
+	dmtc0	k0, $22, 6
+	dmtc0	k1, $22, 7
+	mfc0    k0, CP0_STATUS
+	li      k1, 0x80000
+	and     k1, k0, k1
+	beqz    k1, 1f         /* go to real reset entry */
+	nop
+	li	k1, CKSEG1ADDR(RESET_DATA_PHYS)   /* NMI */
+	ld	k0, BOOT_NMI_HANDLER(k1)
+	jr	k0
+	nop
+
+1:	/* Entry point on core wakeup */
+	mfc0	t0, CP0_EBASE, 1
+	mfc0	t1, CP0_EBASE, 1
+	srl	t1, 5
+	andi	t1, 0x3			/* t1 <- node */
+	li	t2, 0x40000
+	mul	t3, t2, t1		/* t3 = node * 0x40000 */
+	srl	t0, t0, 2
+	and	t0, t0, 0x7		/* t0 <- core */
+	li	t1, 0x1
+	sll	t0, t1, t0
+	nor	t0, t0, zero		/* t0 <- ~(1 << core) */
+	li	t2, SYS_CPU_COHERENT_BASE(0)
+	add	t2, t2, t3		/* t2 <- SYS offset for node */
+	lw	t1, 0(t2)
+	and     t1, t1, t0
+	sw      t1, 0(t2)
+
+	/* read back to ensure complete */
+	lw      t1, 0(t2)
+	sync
+
+	/* Configure LSU on Non-0 Cores. */
+	__config_lsu
+
+/*
+ * Wake up sibling threads from the initial thread in
+ * a core.
+ */
+EXPORT(nlm_boot_siblings)
+	li	t0, CKSEG1ADDR(RESET_DATA_PHYS)
+	lw	t1, BOOT_THREAD_MODE(t0)	/* t1 <- thread mode */
+	li	t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
+	mfcr	t2, t0
+	or	t2, t2, t1
+	mtcr	t2, t0
+
+	/*
+	 * The new hardware thread starts at the next instruction
+	 * For all the cases other than core 0 thread 0, we will
+         * jump to the secondary wait function.
+         */
+	mfc0	v0, CP0_EBASE, 1
+	andi	v0, 0x7f		/* v0 <- node/core */
+
+#if 1
+	/* A0 errata - Write MMU_SETUP after changing thread mode register. */
+	andi	v1, v0, 0x3		/* v1 <- thread id */
+	bnez	v1, 2f
+	nop
+
+        li	t0, MMU_SETUP
+        li	t1, 0
+        mtcr	t1, t0
+	ehb
+#endif
+
+2:	beqz	v0, 4f
+	nop
+
+	/* setup status reg */
+	mfc0	t1, CP0_STATUS
+	li	t0, ST0_BEV
+	or	t1, t0
+	xor	t1, t0
+#ifdef CONFIG_64BIT
+	ori	t1, ST0_KX
+#endif
+	mtc0	t1, CP0_STATUS
+	/* mark CPU ready */
+	PTR_LA	t1, nlm_cpu_ready
+	sll	v1, v0, 2
+	PTR_ADDU t1, v1
+	li	t2, 1
+	sw	t2, 0(t1)
+	/* Wait until NMI hits */
+3:	wait
+	j	3b
+	nop
+
+	/*
+	 * For the boot CPU, we have to restore registers and
+	 * return
+	 */
+4:	dmfc0	t0, $4, 2       /* restore SP from UserLocal */
+	li	t1, 0xfadebeef
+	dmtc0	t1, $4, 2       /* restore SP from UserLocal */
+	PTR_SUBU sp, t0, PT_SIZE
+	RESTORE_ALL
+	jr   ra
+	nop
+EXPORT(nlm_reset_entry_end)
+
+FEXPORT(xlp_boot_core0_siblings)	/* "Master" cpu starts from here */
+	__config_lsu
+	dmtc0   sp, $4, 2		/* SP saved in UserLocal */
+	SAVE_ALL
+	sync
+	/* find the location to which nlm_boot_siblings was relocated */
+	li	t0, CKSEG1ADDR(RESET_VEC_PHYS)
+	dla	t1, nlm_reset_entry
+	dla	t2, nlm_boot_siblings
+	dsubu	t2, t1
+	daddu	t2, t0
+	/* call it */
+	jr	t2
+	nop
+	/* not reached */
+
+	__CPUINIT
+NESTED(nlm_boot_secondary_cpus, 16, sp)
+	PTR_LA	t1, nlm_next_sp
+	PTR_L	sp, 0(t1)
+	PTR_LA	t1, nlm_next_gp
+	PTR_L	gp, 0(t1)
+
+	/* a0 has the processor id */
+	PTR_LA	t0, nlm_early_init_secondary
+	jalr	t0
+	nop
+
+	PTR_LA	t0, smp_bootstrap
+	jr	t0
+	nop
+END(nlm_boot_secondary_cpus)
+	__FINIT
+
+/*
+ * In case of RMIboot bootloader which is used on XLR boards, the CPUs
+ * be already woken up and waiting in bootloader code.
+ * This will get them out of the bootloader code and into linux. Needed
+ *  because the bootloader area will be taken and initialized by linux.
+ */
+	__CPUINIT
+NESTED(nlm_rmiboot_preboot, 16, sp)
+	mfc0	t0, $15, 1	# read ebase
+	andi	t0, 0x1f	# t0 has the processor_id()
+	andi	t2, t0, 0x3	# thread no
+	sll	t0, 2		# offset in cpu array
+
+	PTR_LA	t1, nlm_cpu_ready # mark CPU ready
+	PTR_ADDU t1, t0
+	li	t3, 1
+	sw	t3, 0(t1)
+
+	bnez	t2, 1f		# skip thread programming
+	nop			# for non zero hw threads
+
+	/*
+	 * MMU setup only for first thread in core
+	 */
+	li	t0, 0x400
+	mfcr	t1, t0
+	li	t2, 6 		# XLR thread mode mask
+	nor	t3, t2, zero
+	and	t2, t1, t2	# t2 - current thread mode
+	li	v0, CKSEG1ADDR(RESET_DATA_PHYS)
+	lw	v1, BOOT_THREAD_MODE(v0) # v1 - new thread mode
+	sll	v1, 1
+	beq	v1, t2, 1f 	# same as request value
+	nop			# nothing to do */
+
+	and	t2, t1, t3	# mask out old thread mode
+	or	t1, t2, v1	# put in new value
+	mtcr	t1, t0		# update core control
+
+1:	wait
+	j	1b
+	nop
+END(nlm_rmiboot_preboot)
+	__FINIT