Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

7 files changed, 682 insertions, 0 deletions

diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile
new file mode 100644
index 00000000000..ebe91c57e17
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/Makefile
@@ -0,0 +1,11 @@
+#
+#  Copyright 2000 RidgeRun, Inc.
+#  Author: RidgeRun, Inc.
+#     	glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+#
+# Makefile for the Galileo EV64120 board.
+#
+
+obj-y	+= int-handler.o irq.o promcon.o reset.o serialGT.o setup.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/gt64120/ev64120/int-handler.S b/arch/mips/gt64120/ev64120/int-handler.S
new file mode 100644
index 00000000000..752435faf2d
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/int-handler.S
@@ -0,0 +1,113 @@
+/*
+ * int-handler.S
+ *
+ * Based on the cobalt handler.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * galileo_handle_int -
+ *      We check for the timer first, then check PCI ints A and D.
+ *      Then check for serial IRQ and fall through.
+ */
+		.align	5
+		.set	reorder
+		.set	noat
+		NESTED(galileo_handle_int, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+		mfc0	t0,CP0_CAUSE
+		mfc0	t2,CP0_STATUS
+
+		and	t0,t2
+
+		andi	t1,t0,STATUSF_IP4 /* int2 hardware line (timer) */
+		bnez	t1,ll_gt64120_irq
+		andi	t1,t0,STATUSF_IP2 /* int0 hardware line */
+		bnez	t1,ll_pci_intA
+		andi	t1,t0,STATUSF_IP5 /* int3 hardware line */
+		bnez	t1,ll_pci_intD
+		andi	t1,t0,STATUSF_IP6 /* int4 hardware line */
+		bnez	t1,ll_serial_irq
+		andi	t1,t0,STATUSF_IP7 /* compare int */
+		bnez	t1,ll_compare_irq
+		nop
+
+    /* wrong alarm or masked ... */
+		j	spurious_interrupt
+		nop
+		END(galileo_handle_int)
+
+
+		.align	5
+		.set	reorder
+ll_gt64120_irq:
+		li	a0,4
+		move	a1,sp
+		jal	do_IRQ
+		nop
+		j	ret_from_irq
+		nop
+
+		.align	5
+		.set	reorder
+ll_compare_irq:
+		li 	a0,7
+		move	a1,sp
+		jal	do_IRQ
+		nop
+		j	ret_from_irq
+		nop
+
+		.align	5
+		.set	reorder
+ll_pci_intA:
+		move	a0,sp
+		jal	pci_intA
+		nop
+		j	ret_from_irq
+		nop
+
+#if 0
+		.align	5
+		.set	reorder
+ll_pci_intB:
+		move 	a0,sp
+		jal	pci_intB
+		nop
+		j	ret_from_irq
+		nop
+
+		.align	5
+		.set	reorder
+ll_pci_intC:
+		move 	a0,sp
+		jal	pci_intC
+		nop
+		j	ret_from_irq
+		nop
+#endif
+
+		.align	5
+		.set	reorder
+ll_pci_intD:
+		move 	a0,sp
+		jal	pci_intD
+		nop
+		j	ret_from_irq
+		nop
+
+		.align	5
+		.set	reorder
+ll_serial_irq:
+		li	a0,6
+		move	a1,sp
+		jal	do_IRQ
+		nop
+		j	ret_from_irq
+		nop
diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c
new file mode 100644
index 00000000000..3b186159b21
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/irq.c
@@ -0,0 +1,145 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Code to handle irqs on GT64120A boards
+ *  Derived from mips/orion and Cort <cort@fsmlabs.com>
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/gt64120.h>
+
+asmlinkage inline void pci_intA(struct pt_regs *regs)
+{
+	do_IRQ(GT_INTA, regs);
+}
+
+asmlinkage inline void pci_intD(struct pt_regs *regs)
+{
+	do_IRQ(GT_INTD, regs);
+}
+
+static void disable_ev64120_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (irq_nr >= 8) {	// All PCI interrupts are on line 5 or 2
+		clear_c0_status(9 << 10);
+	} else {
+		clear_c0_status(1 << (irq_nr + 8));
+	}
+	local_irq_restore(flags);
+}
+
+static void enable_ev64120_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (irq_nr >= 8)	// All PCI interrupts are on line 5 or 2
+		set_c0_status(9 << 10);
+	else
+		set_c0_status(1 << (irq_nr + 8));
+	local_irq_restore(flags);
+}
+
+static unsigned int startup_ev64120_irq(unsigned int irq)
+{
+	enable_ev64120_irq(irq);
+	return 0;		/* Never anything pending  */
+}
+
+#define shutdown_ev64120_irq     disable_ev64120_irq
+#define mask_and_ack_ev64120_irq disable_ev64120_irq
+
+static void end_ev64120_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_ev64120_irq(irq);
+}
+
+static struct hw_interrupt_type ev64120_irq_type = {
+	.typename	= "EV64120",
+	.startup	= startup_ev64120_irq,
+	.shutdown	= shutdown_ev64120_irq,
+	.enable		= enable_ev64120_irq,
+	.disable	= disable_ev64120_irq,
+	.ack		= mask_and_ack_ev64120_irq,
+	.end		= end_ev64120_irq,
+	.set_affinity	= NULL
+};
+
+void gt64120_irq_setup(void)
+{
+	extern asmlinkage void galileo_handle_int(void);
+
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 */
+	clear_c0_status(ST0_IM);
+
+	/* Sets the exception_handler array. */
+	set_except_vector(0, galileo_handle_int);
+
+	local_irq_disable();
+
+	/*
+	 * Enable timer.  Other interrupts will be enabled as they are
+	 * registered.
+	 */
+	set_c0_status(IE_IRQ2);
+}
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	/*  Let's initialize our IRQ descriptors  */
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = 0;
+		irq_desc[i].handler = &no_irq_type;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 0;
+		spin_lock_init(&irq_desc[i].lock);
+	}
+
+	gt64120_irq_setup();
+}
diff --git a/arch/mips/gt64120/ev64120/promcon.c b/arch/mips/gt64120/ev64120/promcon.c
new file mode 100644
index 00000000000..b5937c4ba7d
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/promcon.c
@@ -0,0 +1,53 @@
+/*
+ * Wrap-around code for a console using the
+ * SGI PROM io-routines.
+ *
+ * Copyright (c) 1999 Ulf Carlsson
+ *
+ * Derived from DECstation promcon.c
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+static void prom_console_write(struct console *co, const char *s,
+			       unsigned count)
+{
+	extern int CONSOLE_CHANNEL;	// The default serial port
+	unsigned i;
+
+	for (i = 0; i < count; i++) {
+		if (*s == 10)
+			serial_putc(CONSOLE_CHANNEL, 13);
+		serial_putc(CONSOLE_CHANNEL, *s++);
+	}
+}
+
+int prom_getchar(void)
+{
+	return 0;
+}
+
+static struct console sercons = {
+    .name	= "ttyS",
+    .write	= prom_console_write,
+    .flags	= CON_PRINTBUFFER,
+    .index	= -1,
+};
+
+/*
+ *    Register console.
+ */
+
+static int gal_serial_console_init(void)
+{
+	//  serial_init();
+	//serial_set(115200);
+
+	register_console(&sercons);
+
+	return 0;
+}
+
+console_initcall(gal_serial_console_init);
diff --git a/arch/mips/gt64120/ev64120/reset.c b/arch/mips/gt64120/ev64120/reset.c
new file mode 100644
index 00000000000..7b9f5e5bf21
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/reset.c
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Ralf Baechle
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void galileo_machine_restart(char *command)
+{
+	*(volatile char *) 0xbc000000 = 0x0f;
+	/*
+	 * Ouch, we're still alive ... This time we take the silver bullet ...
+	 * ... and find that we leave the hardware in a state in which the
+	 * kernel in the flush locks up somewhen during of after the PCI
+	 * detection stuff.
+	 */
+	set_c0_status(ST0_BEV | ST0_ERL);
+	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+	flush_cache_all();
+	write_c0_wired(0);
+	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
+}
+
+void galileo_machine_halt(void)
+{
+	printk(KERN_NOTICE "You can safely turn off the power\n");
+	while (1)
+		__asm__(".set\tmips3\n\t"
+	                "wait\n\t"
+			".set\tmips0");
+
+}
+
+void galileo_machine_power_off(void)
+{
+	galileo_machine_halt();
+}
diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
new file mode 100644
index 00000000000..16e34a546e5
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@@ -0,0 +1,212 @@
+/*
+ * serialGT.c
+ *
+ * BRIEF MODULE DESCRIPTION
+ *  Low Level Serial Port control for use
+ *  with the Galileo EVB64120A MIPS eval board and
+ *  its on board two channel 16552 Uart.
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+// Note:
+//   Serial CHANNELS - 0 is the bottom connector of evb64120A.
+//                       (The one that maps to the "B" channel of the
+//                       board's uart)
+//                     1 is the top connector of evb64120A.
+//                       (The one that maps to the "A" channel of the
+//                       board's uart)
+int DEBUG_CHANNEL = 0;		// See Note Above
+int CONSOLE_CHANNEL = 1;	// See Note Above
+
+#define DUART 0xBD000000	/* Base address of Uart. */
+#define CHANNELOFFSET 0x20	/* DUART+CHANNELOFFSET gets you to the ChanA
+				   register set of the 16552 Uart device.
+				   DUART+0 gets you to the ChanB register set.
+				 */
+#define DUART_DELTA 0x4
+#define FIFO_ENABLE 0x07
+#define INT_ENABLE  0x04	/* default interrupt mask */
+
+#define RBR 0x00
+#define THR 0x00
+#define DLL 0x00
+#define IER 0x01
+#define DLM 0x01
+#define IIR 0x02
+#define FCR 0x02
+#define LCR 0x03
+#define MCR 0x04
+#define LSR 0x05
+#define MSR 0x06
+#define SCR 0x07
+
+#define LCR_DLAB 0x80
+#define XTAL 1843200
+#define LSR_THRE 0x20
+#define LSR_BI   0x10
+#define LSR_DR   0x01
+#define MCR_LOOP 0x10
+#define ACCESS_DELAY 0x10000
+
+/******************************
+ Routine:
+ Description:
+ ******************************/
+int inreg(int channel, int reg)
+{
+	int val;
+	val =
+	    *((volatile unsigned char *) DUART +
+	      (channel * CHANNELOFFSET) + (reg * DUART_DELTA));
+	return val;
+}
+
+/******************************
+ Routine:
+ Description:
+ ******************************/
+void outreg(int channel, int reg, unsigned char val)
+{
+	*((volatile unsigned char *) DUART + (channel * CHANNELOFFSET)
+	  + (reg * DUART_DELTA)) = val;
+}
+
+/******************************
+ Routine:
+ Description:
+   Initialize the device driver.
+ ******************************/
+void serial_init(int channel)
+{
+	/*
+	 * Configure active port, (CHANNELOFFSET already set.)
+	 *
+	 * Set 8 bits, 1 stop bit, no parity.
+	 *
+	 * LCR<7>       0       divisor latch access bit
+	 * LCR<6>       0       break control (1=send break)
+	 * LCR<5>       0       stick parity (0=space, 1=mark)
+	 * LCR<4>       0       parity even (0=odd, 1=even)
+	 * LCR<3>       0       parity enable (1=enabled)
+	 * LCR<2>       0       # stop bits (0=1, 1=1.5)
+	 * LCR<1:0>     11      bits per character(00=5, 01=6, 10=7, 11=8)
+	 */
+	outreg(channel, LCR, 0x3);
+
+	outreg(channel, FCR, FIFO_ENABLE);	/* Enable the FIFO */
+
+	outreg(channel, IER, INT_ENABLE);	/* Enable appropriate interrupts */
+}
+
+/******************************
+ Routine:
+ Description:
+   Set the baud rate.
+ ******************************/
+void serial_set(int channel, unsigned long baud)
+{
+	unsigned char sav_lcr;
+
+	/*
+	 * Enable access to the divisor latches by setting DLAB in LCR.
+	 *
+	 */
+	sav_lcr = inreg(channel, LCR);
+
+#if 0
+	/*
+	 * Set baud rate
+	 */
+	outreg(channel, LCR, LCR_DLAB | sav_lcr);
+	//  outreg(DLL,(XTAL/(16*2*(baud))-2));
+	outreg(channel, DLL, XTAL / (16 * baud));
+	//  outreg(DLM,(XTAL/(16*2*(baud))-2)>>8);
+	outreg(channel, DLM, (XTAL / (16 * baud)) >> 8);
+#else
+	/*
+	 * Note: Set baud rate, hardcoded here for rate of 115200
+	 * since became unsure of above "buad rate" algorithm (??).
+	 */
+	outreg(channel, LCR, 0x83);
+	outreg(channel, DLM, 0x00);	// See note above
+	outreg(channel, DLL, 0x02);	// See note above.
+	outreg(channel, LCR, 0x03);
+#endif
+
+	/*
+	 * Restore line control register
+	 */
+	outreg(channel, LCR, sav_lcr);
+}
+
+
+/******************************
+ Routine:
+ Description:
+   Transmit a character.
+ ******************************/
+void serial_putc(int channel, int c)
+{
+	while ((inreg(channel, LSR) & LSR_THRE) == 0);
+	outreg(channel, THR, c);
+}
+
+/******************************
+ Routine:
+ Description:
+    Read a received character if one is
+    available.  Return -1 otherwise.
+ ******************************/
+int serial_getc(int channel)
+{
+	if (inreg(channel, LSR) & LSR_DR) {
+		return inreg(channel, RBR);
+	}
+	return -1;
+}
+
+/******************************
+ Routine:
+ Description:
+   Used by embedded gdb client. (example; gdb-stub.c)
+ ******************************/
+char getDebugChar()
+{
+	int val;
+	while ((val = serial_getc(DEBUG_CHANNEL)) == -1);	// loop until we get a character in.
+	return (char) val;
+}
+
+/******************************
+ Routine:
+ Description:
+   Used by embedded gdb target. (example; gdb-stub.c)
+ ******************************/
+void putDebugChar(char c)
+{
+	serial_putc(DEBUG_CHANNEL, (int) c);
+}
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
new file mode 100644
index 00000000000..dba0961400c
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
+#include <linux/bootmem.h>
+
+unsigned long gt64120_base = KSEG1ADDR(0x14000000);
+
+/* These functions are used for rebooting or halting the machine*/
+extern void galileo_machine_restart(char *command);
+extern void galileo_machine_halt(void);
+extern void galileo_machine_power_off(void);
+/*
+ *This structure holds pointers to the pci configuration space accesses
+ *and interrupts allocating routine for device over the PCI
+ */
+extern struct pci_ops galileo_pci_ops;
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+extern void gt64120_time_init(void);
+
+static void __init ev64120_setup(void)
+{
+	_machine_restart = galileo_machine_restart;
+	_machine_halt = galileo_machine_halt;
+	_machine_power_off = galileo_machine_power_off;
+
+	board_time_init = gt64120_time_init;
+	set_io_port_base(KSEG1);
+}
+
+early_initcall(ev64120_setup);
+
+const char *get_system_type(void)
+{
+	return "Galileo EV64120A";
+}
+
+/*
+ * Kernel arguments passed by the firmware
+ *
+ * $a0 - nothing
+ * $a1 - holds a pointer to the eprom parameters
+ * $a2 - nothing
+ */
+
+void __init prom_init(void)
+{
+	mips_machgroup = MACH_GROUP_GALILEO;
+	mips_machtype = MACH_EV64120A;
+
+	add_memory_region(0, 32 << 20, BOOT_MEM_RAM);
+}