Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 493 insertions, 0 deletions

diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
new file mode 100644
index 00000000000..c40daccbb5b
--- /dev/null
+++ b/arch/mips/au1000/common/power.c
@@ -0,0 +1,493 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1000 Power Management routines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *		ppopov@mvista.com or source@mvista.com
+ *
+ *  Some of the routines are right out of init/main.c, whose
+ *  copyrights apply here.
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+
+#include <asm/string.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_PM
+
+#define DEBUG 1
+#ifdef DEBUG
+#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __FUNCTION__ , ## args)
+#else
+#  define DPRINTK(fmt, args...)
+#endif
+
+static void calibrate_delay(void);
+
+extern void set_au1x00_speed(unsigned int new_freq);
+extern unsigned int get_au1x00_speed(void);
+extern unsigned long get_au1x00_uart_baud_base(void);
+extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
+extern unsigned long save_local_and_disable(int controller);
+extern void restore_local_and_enable(int controller, unsigned long mask);
+extern void local_enable_irq(unsigned int irq_nr);
+
+/* Quick acpi hack. This will have to change! */
+#define	CTL_ACPI 9999
+#define	ACPI_S1_SLP_TYP 19
+#define	ACPI_SLEEP 21
+
+
+static DEFINE_SPINLOCK(pm_lock);
+
+/* We need to save/restore a bunch of core registers that are
+ * either volatile or reset to some state across a processor sleep.
+ * If reading a register doesn't provide a proper result for a
+ * later restore, we have to provide a function for loading that
+ * register and save a copy.
+ *
+ * We only have to save/restore registers that aren't otherwise
+ * done as part of a driver pm_* function.
+ */
+static uint	sleep_aux_pll_cntrl;
+static uint	sleep_cpu_pll_cntrl;
+static uint	sleep_pin_function;
+static uint	sleep_uart0_inten;
+static uint	sleep_uart0_fifoctl;
+static uint	sleep_uart0_linectl;
+static uint	sleep_uart0_clkdiv;
+static uint	sleep_uart0_enable;
+static uint	sleep_usbhost_enable;
+static uint	sleep_usbdev_enable;
+static uint	sleep_static_memctlr[4][3];
+
+/* Define this to cause the value you write to /proc/sys/pm/sleep to
+ * set the TOY timer for the amount of time you want to sleep.
+ * This is done mainly for testing, but may be useful in other cases.
+ * The value is number of 32KHz ticks to sleep.
+ */
+#define SLEEP_TEST_TIMEOUT 1
+#ifdef SLEEP_TEST_TIMEOUT
+static	int	sleep_ticks;
+void wakeup_counter0_set(int ticks);
+#endif
+
+static void
+save_core_regs(void)
+{
+	extern void save_au1xxx_intctl(void);
+	extern void pm_eth0_shutdown(void);
+
+	/* Do the serial ports.....these really should be a pm_*
+	 * registered function by the driver......but of course the
+	 * standard serial driver doesn't understand our Au1xxx
+	 * unique registers.
+	 */
+	sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
+	sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
+	sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
+	sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
+	sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
+
+	/* Shutdown USB host/device.
+	*/
+	sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
+
+	/* There appears to be some undocumented reset register....
+	*/
+	au_writel(0, 0xb0100004); au_sync();
+	au_writel(0, USB_HOST_CONFIG); au_sync();
+
+	sleep_usbdev_enable = au_readl(USBD_ENABLE);
+	au_writel(0, USBD_ENABLE); au_sync();
+
+	/* Save interrupt controller state.
+	*/
+	save_au1xxx_intctl();
+
+	/* Clocks and PLLs.
+	*/
+	sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
+
+	/* We don't really need to do this one, but unless we
+	 * write it again it won't have a valid value if we
+	 * happen to read it.
+	 */
+	sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);
+
+	sleep_pin_function = au_readl(SYS_PINFUNC);
+
+	/* Save the static memory controller configuration.
+	*/
+	sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
+	sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
+	sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
+	sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1);
+	sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1);
+	sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1);
+	sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2);
+	sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2);
+	sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2);
+	sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
+	sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
+	sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
+}
+
+static void
+restore_core_regs(void)
+{
+	extern void restore_au1xxx_intctl(void);
+	extern void wakeup_counter0_adjust(void);
+
+	au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
+	au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
+	au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
+
+	/* Restore the static memory controller configuration.
+	*/
+	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
+	au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
+	au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
+	au_writel(sleep_static_memctlr[1][0], MEM_STCFG1);
+	au_writel(sleep_static_memctlr[1][1], MEM_STTIME1);
+	au_writel(sleep_static_memctlr[1][2], MEM_STADDR1);
+	au_writel(sleep_static_memctlr[2][0], MEM_STCFG2);
+	au_writel(sleep_static_memctlr[2][1], MEM_STTIME2);
+	au_writel(sleep_static_memctlr[2][2], MEM_STADDR2);
+	au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
+	au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
+	au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
+
+	/* Enable the UART if it was enabled before sleep.
+	 * I guess I should define module control bits........
+	 */
+	if (sleep_uart0_enable & 0x02) {
+		au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
+		au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
+		au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
+		au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
+		au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
+		au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
+		au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
+	}
+
+	restore_au1xxx_intctl();
+	wakeup_counter0_adjust();
+}
+
+unsigned long suspend_mode;
+
+void wakeup_from_suspend(void)
+{
+	suspend_mode = 0;
+}
+
+int au_sleep(void)
+{
+	unsigned long wakeup, flags;
+	extern	void	save_and_sleep(void);
+
+	spin_lock_irqsave(&pm_lock,flags);
+
+	save_core_regs();
+
+	flush_cache_all();
+
+	/** The code below is all system dependent and we should probably
+	 ** have a function call out of here to set this up.  You need
+	 ** to configure the GPIO or timer interrupts that will bring
+	 ** you out of sleep.
+	 ** For testing, the TOY counter wakeup is useful.
+	 **/
+
+#if 0
+	au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
+
+	/* gpio 6 can cause a wake up event */
+	wakeup = au_readl(SYS_WAKEMSK);
+	wakeup &= ~(1 << 8);	/* turn off match20 wakeup */
+	wakeup |= 1 << 6;	/* turn on gpio 6 wakeup   */
+#else
+	/* For testing, allow match20 to wake us up.
+	*/
+#ifdef SLEEP_TEST_TIMEOUT
+	wakeup_counter0_set(sleep_ticks);
+#endif
+	wakeup = 1 << 8;	/* turn on match20 wakeup   */
+	wakeup = 0;
+#endif
+	au_writel(1, SYS_WAKESRC);	/* clear cause */
+	au_sync();
+	au_writel(wakeup, SYS_WAKEMSK);
+	au_sync();
+
+	save_and_sleep();
+
+	/* after a wakeup, the cpu vectors back to 0x1fc00000 so
+	 * it's up to the boot code to get us back here.
+	 */
+	restore_core_regs();
+	spin_unlock_irqrestore(&pm_lock, flags);
+	return 0;
+}
+
+static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
+		       void *buffer, size_t * len)
+{
+	int retval = 0;
+#ifdef SLEEP_TEST_TIMEOUT
+#define TMPBUFLEN2 16
+	char buf[TMPBUFLEN2], *p;
+#endif
+
+	if (!write) {
+		*len = 0;
+	} else {
+#ifdef SLEEP_TEST_TIMEOUT
+		if (*len > TMPBUFLEN2 - 1) {
+			return -EFAULT;
+		}
+		if (copy_from_user(buf, buffer, *len)) {
+			return -EFAULT;
+		}
+		buf[*len] = 0;
+		p = buf;
+		sleep_ticks = simple_strtoul(p, &p, 0);
+#endif
+		retval = pm_send_all(PM_SUSPEND, (void *) 2);
+
+		if (retval)
+			return retval;
+
+		au_sleep();
+		retval = pm_send_all(PM_RESUME, (void *) 0);
+	}
+	return retval;
+}
+
+static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
+			 void *buffer, size_t * len)
+{
+	int retval = 0;
+	void	au1k_wait(void);
+
+	if (!write) {
+		*len = 0;
+	} else {
+		retval = pm_send_all(PM_SUSPEND, (void *) 2);
+		if (retval)
+			return retval;
+		suspend_mode = 1;
+		au1k_wait();
+		retval = pm_send_all(PM_RESUME, (void *) 0);
+	}
+	return retval;
+}
+
+
+static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
+		      void *buffer, size_t * len)
+{
+	int retval = 0, i;
+	unsigned long val, pll;
+#define TMPBUFLEN 64
+#define MAX_CPU_FREQ 396
+	char buf[TMPBUFLEN], *p;
+	unsigned long flags, intc0_mask, intc1_mask;
+	unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
+	    old_refresh;
+	unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	if (!write) {
+		*len = 0;
+	} else {
+		/* Parse the new frequency */
+		if (*len > TMPBUFLEN - 1) {
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+		if (copy_from_user(buf, buffer, *len)) {
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+		buf[*len] = 0;
+		p = buf;
+		val = simple_strtoul(p, &p, 0);
+		if (val > MAX_CPU_FREQ) {
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+
+		pll = val / 12;
+		if ((pll > 33) || (pll < 7)) {	/* 396 MHz max, 84 MHz min */
+			/* revisit this for higher speed cpus */
+			spin_unlock_irqrestore(&pm_lock, flags);
+			return -EFAULT;
+		}
+
+		old_baud_base = get_au1x00_uart_baud_base();
+		old_cpu_freq = get_au1x00_speed();
+
+		new_cpu_freq = pll * 12 * 1000000;
+	        new_baud_base =  (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+		set_au1x00_speed(new_cpu_freq);
+		set_au1x00_uart_baud_base(new_baud_base);
+
+		old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
+		new_refresh =
+		    ((old_refresh * new_cpu_freq) /
+		     old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
+
+		au_writel(pll, SYS_CPUPLL);
+		au_sync_delay(1);
+		au_writel(new_refresh, MEM_SDREFCFG);
+		au_sync_delay(1);
+
+		for (i = 0; i < 4; i++) {
+			if (au_readl
+			    (UART_BASE + UART_MOD_CNTRL +
+			     i * 0x00100000) == 3) {
+				old_clk =
+				    au_readl(UART_BASE + UART_CLK +
+					  i * 0x00100000);
+				// baud_rate = baud_base/clk
+				baud_rate = old_baud_base / old_clk;
+				/* we won't get an exact baud rate and the error
+				 * could be significant enough that our new
+				 * calculation will result in a clock that will
+				 * give us a baud rate that's too far off from
+				 * what we really want.
+				 */
+				if (baud_rate > 100000)
+					baud_rate = 115200;
+				else if (baud_rate > 50000)
+					baud_rate = 57600;
+				else if (baud_rate > 30000)
+					baud_rate = 38400;
+				else if (baud_rate > 17000)
+					baud_rate = 19200;
+				else
+					(baud_rate = 9600);
+				// new_clk = new_baud_base/baud_rate
+				new_clk = new_baud_base / baud_rate;
+				au_writel(new_clk,
+				       UART_BASE + UART_CLK +
+				       i * 0x00100000);
+				au_sync_delay(10);
+			}
+		}
+	}
+
+
+	/* We don't want _any_ interrupts other than
+	 * match20. Otherwise our calibrate_delay()
+	 * calculation will be off, potentially a lot.
+	 */
+	intc0_mask = save_local_and_disable(0);
+	intc1_mask = save_local_and_disable(1);
+	local_enable_irq(AU1000_TOY_MATCH2_INT);
+	spin_unlock_irqrestore(&pm_lock, flags);
+	calibrate_delay();
+	restore_local_and_enable(0, intc0_mask);
+	restore_local_and_enable(1, intc1_mask);
+	return retval;
+}
+
+
+static struct ctl_table pm_table[] = {
+	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend},
+	{ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep},
+	{CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq},
+	{0}
+};
+
+static struct ctl_table pm_dir_table[] = {
+	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
+	{0}
+};
+
+/*
+ * Initialize power interface
+ */
+static int __init pm_init(void)
+{
+	register_sysctl_table(pm_dir_table, 1);
+	return 0;
+}
+
+__initcall(pm_init);
+
+
+/*
+ * This is right out of init/main.c
+ */
+
+/* This is the number of bits of precision for the loops_per_jiffy.  Each
+   bit takes on average 1.5/HZ seconds.  This (like the original) is a little
+   better than 1% */
+#define LPS_PREC 8
+
+static void calibrate_delay(void)
+{
+	unsigned long ticks, loopbit;
+	int lps_precision = LPS_PREC;
+
+	loops_per_jiffy = (1 << 12);
+
+	while (loops_per_jiffy <<= 1) {
+		/* wait for "start of" clock tick */
+		ticks = jiffies;
+		while (ticks == jiffies)
+			/* nothing */ ;
+		/* Go .. */
+		ticks = jiffies;
+		__delay(loops_per_jiffy);
+		ticks = jiffies - ticks;
+		if (ticks)
+			break;
+	}
+
+/* Do a binary approximation to get loops_per_jiffy set to equal one clock
+   (up to lps_precision bits) */
+	loops_per_jiffy >>= 1;
+	loopbit = loops_per_jiffy;
+	while (lps_precision-- && (loopbit >>= 1)) {
+		loops_per_jiffy |= loopbit;
+		ticks = jiffies;
+		while (ticks == jiffies);
+		ticks = jiffies;
+		__delay(loops_per_jiffy);
+		if (jiffies != ticks)	/* longer than 1 tick */
+			loops_per_jiffy &= ~loopbit;
+	}
+}
+#endif				/* CONFIG_PM */