Merge branch 'core/xen' into x86/urgent

45 files changed, 1336 insertions, 1882 deletions

diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index e4a057d80ab..7f8ef13d001 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -128,9 +128,10 @@ config SOC_AU1200
 config SOC_AU1X00
 	bool
 	select 64BIT_PHYS_ADDR
-	select CEVT_R4K
-	select CSRC_R4K
+	select CEVT_R4K_LIB
+	select CSRC_R4K_LIB
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
+	select GENERIC_HARDIRQS_NO__DO_IRQ
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index df48fd65bbf..d50d4764eaf 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -6,8 +6,8 @@
 #
 
 obj-y += prom.o irq.o puts.o time.o reset.o \
-	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
-	sleeper.o cputable.o dma.o dbdma.o gpio.o
+	clocks.o platform.o power.o setup.o \
+	sleeper.o dma.o dbdma.o gpio.o
 
 obj-$(CONFIG_PCI)		+= pci.o
 
diff --git a/arch/mips/alchemy/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c
deleted file mode 100644
index c7ca1596394..00000000000
--- a/arch/mips/alchemy/common/au1xxx_irqmap.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx processor specific IRQ tables
- *
- * Copyright 2004 Embedded Edge, LLC
- *	dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <au1000.h>
-
-/* The IC0 interrupt table.  This is processor, rather than
- * board dependent, so no reason to keep this info in the board
- * dependent files.
- *
- * Careful if you change match 2 request!
- * The interrupt handler is called directly from the low level dispatch code.
- */
-struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
-
-#if defined(CONFIG_SOC_AU1000)
-	{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1500)
-
-	{ AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1100)
-
-	{ AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	/* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
-	{ AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1550)
-
-	{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-
-#elif defined(CONFIG_SOC_AU1200)
-
-	{ AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
-
-#else
-#error "Error: Unknown Alchemy SOC"
-#endif
-
-};
-
-int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index 043429d17c5..d8991854530 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -27,12 +27,21 @@
  */
 
 #include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>
 
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
+ * but just in case.....
+ */
+#define AU1000_SRC_CLK	12000000
+
 static unsigned int au1x00_clock; /*  Hz */
-static unsigned int lcd_clock;    /* KHz */
 static unsigned long uart_baud_base;
 
+static DEFINE_SPINLOCK(time_lock);
+
 /*
  * Set the au1000_clock
  */
@@ -63,31 +72,45 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 }
 
 /*
- * Calculate the Au1x00's LCD clock based on the current
- * cpu clock and the system bus clock, and try to keep it
- * below 40 MHz (the Pb1000 board can lock-up if the LCD
- * clock is over 40 MHz).
+ * We read the real processor speed from the PLL.  This is important
+ * because it is more accurate than computing it from the 32 KHz
+ * counter, if it exists.  If we don't have an accurate processor
+ * speed, all of the peripherals that derive their clocks based on
+ * this advertised speed will introduce error and sometimes not work
+ * properly.  This function is futher convoluted to still allow configurations
+ * to do that in case they have really, really old silicon with a
+ * write-only PLL register.			-- Dan
  */
-void set_au1x00_lcd_clock(void)
+unsigned long au1xxx_calc_clock(void)
 {
-	unsigned int static_cfg0;
-	unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
-				  ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
+	unsigned long cpu_speed;
+	unsigned long flags;
 
-	static_cfg0 = au_readl(MEM_STCFG0);
+	spin_lock_irqsave(&time_lock, flags);
 
-	if (static_cfg0 & (1 << 11))
-		lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold by AMD, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (au1xxx_cpu_has_pll_wo())
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+		cpu_speed = 396000000;
+#endif
 	else
-		lcd_clock = sys_busclk / 4;
+		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
 
-	if (lcd_clock > 50000) /* Epson MAX */
-		printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
-				    lcd_clock);
-}
+	/* On Alchemy CPU:counter ratio is 1:1 */
+	mips_hpt_frequency = cpu_speed;
+	/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+							  & 0x03) + 2) * 16));
 
-unsigned int get_au1x00_lcd_clock(void)
-{
-	return lcd_clock;
+	spin_unlock_irqrestore(&time_lock, flags);
+
+	set_au1x00_speed(cpu_speed);
+
+	return cpu_speed;
 }
-EXPORT_SYMBOL(get_au1x00_lcd_clock);
diff --git a/arch/mips/alchemy/common/cputable.c b/arch/mips/alchemy/common/cputable.c
deleted file mode 100644
index ba6430bc2d0..00000000000
--- a/arch/mips/alchemy/common/cputable.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  arch/mips/au1000/common/cputable.c
- *
- *  Copyright (C) 2004 Dan Malek (dan@embeddededge.com)
- *	Copied from PowerPC and updated for Alchemy Au1xxx processors.
- *
- *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <asm/mach-au1x00/au1000.h>
-
-struct cpu_spec *cur_cpu_spec[NR_CPUS];
-
-/* With some thought, we can probably use the mask to reduce the
- * size of the table.
- */
-struct cpu_spec cpu_specs[] = {
-	{ 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
-	{ 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
-	{ 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
-	{ 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
-	{ 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
-	{ 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
-	{ 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
-	{ 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
-	{ 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
-	{ 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
-	{ 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
-	{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
-	{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
-	{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
-	{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
-	{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
-	{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
-};
-
-void set_cpuspec(void)
-{
-	struct	cpu_spec *sp;
-	u32	prid;
-
-	prid = read_c0_prid();
-	sp = cpu_specs;
-	while ((prid & sp->prid_mask) != sp->prid_value)
-		sp++;
-	cur_cpu_spec[0] = sp;
-}
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 601ee9180ee..3ab6d80d150 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -174,6 +174,11 @@ static dbdev_tab_t dbdev_tab[] = {
 
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
+#ifdef CONFIG_PM
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+#endif
+
+
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 
 static dbdev_tab_t *find_dbdev_id(u32 id)
@@ -975,4 +980,64 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	return nbytes;
 }
 
+#ifdef CONFIG_PM
+void au1xxx_dbdma_suspend(void)
+{
+	int i;
+	u32 addr;
+
+	addr = DDMA_GLOBAL_BASE;
+	au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
+	au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
+	au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
+	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
+
+	/* save channel configurations */
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
+		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
+		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
+		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
+		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
+		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
+		au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
+
+		/* halt channel */
+		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
+		au_sync();
+		while (!(au_readl(addr + 0x14) & 1))
+			au_sync();
+
+		addr += 0x100;	/* next channel base */
+	}
+	/* disable channel interrupts */
+	au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
+	au_sync();
+}
+
+void au1xxx_dbdma_resume(void)
+{
+	int i;
+	u32 addr;
+
+	addr = DDMA_GLOBAL_BASE;
+	au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
+	au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
+	au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
+	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
+
+	/* restore channel configurations */
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
+		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
+		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
+		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
+		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
+		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
+		au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
+		au_sync();
+		addr += 0x100;	/* next channel base */
+	}
+}
+#endif	/* CONFIG_PM */
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 40c6ceceb5f..c88c821b4c3 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -24,6 +24,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/bitops.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -36,15 +37,172 @@
 #include <asm/mach-pb1x00/pb1000.h>
 #endif
 
-#define EXT_INTC0_REQ0 2 /* IP 2 */
-#define EXT_INTC0_REQ1 3 /* IP 3 */
-#define EXT_INTC1_REQ0 4 /* IP 4 */
-#define EXT_INTC1_REQ1 5 /* IP 5 */
-#define MIPS_TIMER_IP  7 /* IP 7 */
-
-void (*board_init_irq)(void) __initdata = NULL;
+static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
+
+/* per-processor fixed function irqs */
+struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
+
+#if defined(CONFIG_SOC_AU1000)
+	{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1500)
+
+	{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1100)
+
+	{ AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1550)
+
+	{ AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },