MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files

Most of these files are have more comments than real code;  merge
them all into single board-<name>.c files.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2869/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 230 deletions

diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
deleted file mode 100644
index cc47b6868ca..00000000000
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * MTX-1 platform devices registration
- *
- * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mtd/mtd-abi.h>
-
-#include <asm/mach-au1x00/au1xxx_eth.h>
-
-static struct gpio_keys_button mtx1_gpio_button[] = {
-	{
-		.gpio = 207,
-		.code = BTN_0,
-		.desc = "System button",
-	}
-};
-
-static struct gpio_keys_platform_data mtx1_buttons_data = {
-	.buttons = mtx1_gpio_button,
-	.nbuttons = ARRAY_SIZE(mtx1_gpio_button),
-};
-
-static struct platform_device mtx1_button = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &mtx1_buttons_data,
-	}
-};
-
-static struct resource mtx1_wdt_res[] = {
-	[0] = {
-		.start	= 215,
-		.end	= 215,
-		.name	= "mtx1-wdt-gpio",
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device mtx1_wdt = {
-	.name = "mtx1-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mtx1_wdt_res),
-	.resource = mtx1_wdt_res,
-};
-
-static struct gpio_led default_leds[] = {
-	{
-		.name	= "mtx1:green",
-		.gpio = 211,
-	}, {
-		.name = "mtx1:red",
-		.gpio = 212,
-	},
-};
-
-static struct gpio_led_platform_data mtx1_led_data = {
-	.num_leds = ARRAY_SIZE(default_leds),
-	.leds = default_leds,
-};
-
-static struct platform_device mtx1_gpio_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &mtx1_led_data,
-	}
-};
-
-static struct mtd_partition mtx1_mtd_partitions[] = {
-	{
-		.name	= "filesystem",
-		.size	= 0x01C00000,
-		.offset	= 0,
-	},
-	{
-		.name	= "yamon",
-		.size	= 0x00100000,
-		.offset	= MTDPART_OFS_APPEND,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name	= "kernel",
-		.size	= 0x002c0000,
-		.offset	= MTDPART_OFS_APPEND,
-	},
-	{
-		.name	= "yamon env",
-		.size	= 0x00040000,
-		.offset	= MTDPART_OFS_APPEND,
-	},
-};
-
-static struct physmap_flash_data mtx1_flash_data = {
-	.width		= 4,
-	.nr_parts	= 4,
-	.parts		= mtx1_mtd_partitions,
-};
-
-static struct resource mtx1_mtd_resource = {
-	.start	= 0x1e000000,
-	.end	= 0x1fffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device mtx1_mtd = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &mtx1_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &mtx1_mtd_resource,
-};
-
-static struct resource alchemy_pci_host_res[] = {
-	[0] = {
-		.start	= AU1500_PCI_PHYS_ADDR,
-		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static int mtx1_pci_idsel(unsigned int devsel, int assert)
-{
-	/* This function is only necessary to support a proprietary Cardbus
-	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
-	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
-	 */
-	if (assert && devsel != 0)
-		/* Suppress signal to Cardbus */
-		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
-	else
-		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
-
-	udelay(1);
-	return 1;
-}
-
-static const char mtx1_irqtab[][5] = {
-	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
-	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
-	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
-	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
-	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
-	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
-	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
-	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	return mtx1_irqtab[slot][pin];
-}
-
-static struct alchemy_pci_platdata mtx1_pci_pd = {
-	.board_map_irq	 = mtx1_map_pci_irq,
-	.board_pci_idsel = mtx1_pci_idsel,
-	.pci_cfg_set	 = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
-			   PCI_CONFIG_CH |
-#if defined(__MIPSEB__)
-			   PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
-#else
-			   0,
-#endif
-};
-
-static struct platform_device mtx1_pci_host = {
-	.dev.platform_data = &mtx1_pci_pd,
-	.name		= "alchemy-pci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
-	.resource	= alchemy_pci_host_res,
-};
-
-
-static struct __initdata platform_device * mtx1_devs[] = {
-	&mtx1_pci_host,
-	&mtx1_gpio_leds,
-	&mtx1_wdt,
-	&mtx1_button,
-	&mtx1_mtd,
-};
-
-static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
-	.phy_search_highest_addr	= 1,
-	.phy1_search_mac0 		= 1,
-};
-
-static int __init mtx1_register_devices(void)
-{
-	int rc;
-
-	au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
-
-	rc = gpio_request(mtx1_gpio_button[0].gpio,
-					mtx1_gpio_button[0].desc);
-	if (rc < 0) {
-		printk(KERN_INFO "mtx1: failed to request %d\n",
-					mtx1_gpio_button[0].gpio);
-		goto out;
-	}
-	gpio_direction_input(mtx1_gpio_button[0].gpio);
-out:
-	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
-}
-
-arch_initcall(mtx1_register_devices);