Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits)
  MIPS: Delete unused function add_temporary_entry.
  MIPS: Set default pci cache line size.
  MIPS: Flush huge TLB
  MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  MIPS: Octeon: Add support for OCTEON II PCIe
  MIPS: Octeon: Update PCI Latency timer and enable more error reporting.
  MIPS: Alchemy: Update cpu-feature-overrides
  MIPS: Alchemy: db1200: Improve PB1200 detection.
  MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  MIPS: Alchemy: irq: register pm at irq init time
  MIPS: Alchemy: Touchscreen support on DB1100
  MIPS: Alchemy: Hook up IrDA on DB1000/DB1100
  net/irda: convert au1k_ir to platform driver.
  MIPS: Alchemy: remove unused board headers
  MTD: nand: make au1550nd.c a platform_driver
  MIPS: Netlogic: Mark Netlogic chips as SMT capable
  MIPS: Netlogic: Add support for XLP 3XX cores
  MIPS: Netlogic: Merge some of XLR/XLP wakup code
  MIPS: Netlogic: Add default XLP config.
  ...

Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c,
traps.c} and drivers/tty/serial/Makefile

1 files changed, 61 insertions, 23 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 29d92187ff3..c4c1312473f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -719,7 +719,6 @@ config CAVIUM_OCTEON_SIMULATOR
 	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_HAS_CPU_CAVIUM_OCTEON
 	select HOLES_IN_ZONE
@@ -735,7 +734,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
@@ -764,7 +762,6 @@ config NLM_XLR_BOARD
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select NLM_COMMON
-	select NLM_XLR
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
@@ -779,6 +776,7 @@ config NLM_XLR_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
+	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
@@ -786,6 +784,33 @@ config NLM_XLR_BOARD
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
 
+config NLM_XLP_BOARD
+	bool "Netlogic XLP based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select SYS_HAS_CPU_XLP
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  This board is based on Netlogic XLP Processor.
+	  Say Y here if you have a XLP based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -1416,51 +1441,36 @@ config CPU_CAVIUM_OCTEON
 config CPU_BMIPS3300
 	bool "BMIPS3300"
 	depends on SYS_HAS_CPU_BMIPS3300
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select WEAK_ORDERING
+	select CPU_BMIPS
 	help
 	  Broadcom BMIPS3300 processors.
 
 config CPU_BMIPS4350
 	bool "BMIPS4350"
 	depends on SYS_HAS_CPU_BMIPS4350
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
+	select CPU_BMIPS
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select WEAK_ORDERING
 	help
 	  Broadcom BMIPS4350 ("VIPER") processors.
 
 config CPU_BMIPS4380
 	bool "BMIPS4380"
 	depends on SYS_HAS_CPU_BMIPS4380
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
+	select CPU_BMIPS
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select WEAK_ORDERING
 	help
 	  Broadcom BMIPS4380 processors.
 
 config CPU_BMIPS5000
 	bool "BMIPS5000"
 	depends on SYS_HAS_CPU_BMIPS5000
-	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_BMIPS
 	select CPU_SUPPORTS_HIGHMEM
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
+	select MIPS_CPU_SCACHE
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select WEAK_ORDERING
 	help
 	  Broadcom BMIPS5000 processors.
 
@@ -1475,6 +1485,19 @@ config CPU_XLR
 	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  Netlogic Microsystems XLR/XLS processors.
+
+config CPU_XLP
+	bool "Netlogic XLP SoC"
+	depends on SYS_HAS_CPU_XLP
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_HAS_LLSC
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_HAS_PREFETCH
+	help
+	  Netlogic Microsystems XLP processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1521,6 +1544,15 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 
+config CPU_BMIPS
+	bool
+	select CPU_MIPS32
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select WEAK_ORDERING
+
 config SYS_HAS_CPU_LOONGSON2E
 	bool
 
@@ -1608,6 +1640,9 @@ config SYS_HAS_CPU_BMIPS5000
 config SYS_HAS_CPU_XLR
 	bool
 
+config SYS_HAS_CPU_XLP
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -1995,6 +2030,9 @@ config CPU_HAS_SMARTMIPS
 config CPU_HAS_WB
 	bool
 
+config XKS01
+	bool
+
 #
 # Vectored interrupt mode is an R2 feature
 #