diff options
| author | Michal Simek <monstr@monstr.eu> | 2010-11-08 12:37:40 +0100 |
|---|---|---|
| committer | Michal Simek <monstr@monstr.eu> | 2011-03-15 10:59:00 +0100 |
| commit | 0b9b0200b0922c29dc251b99700f96dade92214a (patch) | |
| tree | 23aa052508da168745cddca2a650e1627e29ec4d /arch/microblaze | |
| parent | 7574349cee0b1cddc0aa1104d9b2fc5152d318d9 (diff) | |
microblaze: Do not copy reset vectors/manual reset vector setup
Reset vector can be setup by bootloader and kernel doens't need
to touch it. If you require to setup reset vector, please use
CONFIG_MANUAL_RESET_VECTOR throught menuconfig.
It is not possible to setup address 0x0 as reset address because
make no sense to set it up at all.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: John Williams <john.williams@petalogix.com>
Diffstat (limited to 'arch/microblaze')
| -rw-r--r-- | arch/microblaze/Kconfig | 11 | ||||
| -rw-r--r-- | arch/microblaze/kernel/entry.S | 7 | ||||
| -rw-r--r-- | arch/microblaze/kernel/setup.c | 12 |
3 files changed, 24 insertions, 6 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 050aca35aca..922c4194c7b 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -184,6 +184,17 @@ config LOWMEM_SIZE hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL default "0x30000000" +config MANUAL_RESET_VECTOR + hex "Microblaze reset vector address setup" + default "0x0" + help + Set this option to have the kernel override the CPU Reset vector. + If zero, no change will be made to the MicroBlaze reset vector at + address 0x0. + If non-zero, a jump instruction to this address, will be written + to the reset vector at address 0x0. + If you are unsure, set it to default value 0x0. + config KERNEL_START_BOOL bool "Set custom kernel base address" depends on ADVANCED_OPTIONS diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 6b4052459d5..ca15bc5c744 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -993,11 +993,10 @@ ENTRY(_reset) /* These are compiled and loaded into high memory, then * copied into place in mach_early_setup */ .section .init.ivt, "ax" +#if CONFIG_MANUAL_RESET_VECTOR .org 0x0 - /* this is very important - here is the reset vector */ - /* in current MMU branch you don't care what is here - it is - * used from bootloader site - but this is correct for FS-BOOT */ - brai 0x70 + brai CONFIG_MANUAL_RESET_VECTOR +#endif .org 0x8 brai TOPHYS(_user_exception); /* syscall handler */ .org 0x10 diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 9312fbb37ef..8e2c09b7ff2 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -95,7 +95,8 @@ inline unsigned get_romfs_len(unsigned *addr) void __init machine_early_init(const char *cmdline, unsigned int ram, unsigned int fdt, unsigned int msr) { - unsigned long *src, *dst = (unsigned long *)0x0; + unsigned long *src, *dst; + unsigned int offset = 0; /* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the * end of kernel. There are two position which we want to check. @@ -168,7 +169,14 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, "CPU have it %x\n", msr); #endif - for (src = __ivt_start; src < __ivt_end; src++, dst++) + /* Do not copy reset vectors. offset = 0x2 means skip the first + * two instructions. dst is pointer to MB vectors which are placed + * in block ram. If you want to copy reset vector setup offset to 0x0 */ +#if !CONFIG_MANUAL_RESET_VECTOR + offset = 0x2; +#endif + dst = (unsigned long *) (offset * sizeof(u32)); + for (src = __ivt_start + offset; src < __ivt_end; src++, dst++) *dst = *src; /* Initialize global data */ |