Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (53 commits)
  m68knommu: Make PAGE_SIZE available to assembly files.
  m68knommu: fix ColdFire definition of CLOCK_TICK_RATE
  m68knommu: set multi-function pins for ethernet when enabled
  m68knommu: remove special interrupt handling code for ne2k support
  m68knommu: relax IO_SPACE_LIMIT setting
  m68knommu: remove ColdFire direct interrupt register access
  m68knommu: create a speciailized ColdFire 5272 interrupt controller
  m68knommu: add support for second interrupt controller of ColdFire 5249
  m68knommu: clean up old ColdFire timer irq setup
  m68knommu: map ColdFire interrupts to correct masking bits
  m68knommu: clean up ColdFire 532x CPU timer setup
  m68knommu: simplify ColdFire "timers" clock initialization
  m68knommu: support code to mask external interrupts on old ColdFire CPU's
  m68knommu: merge old ColdFire interrupt controller masking macros
  m68knommu: remove duplicate ColdFire mcf_autovector() code
  m68knommu: move ColdFire INTC definitions to new include file
  m68knommu: mask off all interrupts in ColdFire intc-simr controller
  m68knommu: remove timer device interrupt setup for ColdFire 532x
  m68knommu: remove interrupt masking from ColdFire pit timer
  m68knommu: remove unecessary interrupt level setting in ColdFire 520x setup
  ...

50 files changed, 3122 insertions, 645 deletions

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 534376299a9..e2201b90aa2 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -47,6 +47,10 @@ config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
 
+config GENERIC_GPIO
+	bool
+	default n
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -182,6 +186,8 @@ config M527x
 config COLDFIRE
 	bool
 	depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407)
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	default y
 
 config CLOCK_SET
diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index 56e0f4c55a6..c9cac36d442 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -29,32 +29,6 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 	set_irq_regs(oldregs);
 }
 
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq);
-}
-
-static struct irq_chip m_irq_chip = {
-	.name		= "M68K-INTC",
-	.enable		= enable_vector,
-	.disable	= disable_vector,
-	.ack		= ack_vector,
-};
-
-void __init init_IRQ(void)
-{
-	int irq;
-
-	init_vectors();
-
-	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = NULL;
-		irq_desc[irq].depth = 1;
-		irq_desc[irq].chip = &m_irq_chip;
-	}
-}
-
 int show_interrupts(struct seq_file *p, void *v)
 {
 	struct irqaction *ap;
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index d182b2f7221..c2aa717de08 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -69,7 +69,7 @@ static unsigned long read_rtc_mmss(void)
 	if ((year += 1900) < 1970)
 		year += 100;
 
-	return  mktime(year, mon, day, hour, min, sec);;
+	return  mktime(year, mon, day, hour, min, sec);
 }
 
 unsigned long read_persistent_clock(void)
diff --git a/arch/m68knommu/lib/checksum.c b/arch/m68knommu/lib/checksum.c
index 269d83bfbbe..eccf25d3d73 100644
--- a/arch/m68knommu/lib/checksum.c
+++ b/arch/m68knommu/lib/checksum.c
@@ -92,6 +92,7 @@ out:
 	return result;
 }
 
+#ifdef CONFIG_COLDFIRE
 /*
  *	This is a version of ip_compute_csum() optimized for IP headers,
  *	which always checksum on 4 octet boundaries.
@@ -100,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	return (__force __sum16)~do_csum(iph,ihl*4);
 }
+#endif
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -127,15 +129,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum)
 EXPORT_SYMBOL(csum_partial);
 
 /*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
  * copy from fs while checksumming, otherwise like csum_partial
  */
 
diff --git a/arch/m68knommu/platform/5206/Makefile b/arch/m68knommu/platform/5206/Makefile
index a439d9ab3f2..113c3339006 100644
--- a/arch/m68knommu/platform/5206/Makefile
+++ b/arch/m68knommu/platform/5206/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index f6f79874e9a..9c335465e66 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -49,11 +49,11 @@ static void __init m5206_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -68,38 +68,19 @@ static void __init m5206_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
+static void __init m5206_timers_init(void)
 {
-	volatile unsigned char  *mbar;
-	unsigned char		icr;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		vec -= 25;
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
-		*(mbar + MCFSIM_ICR1 + vec) = icr;
-		vec = 0x1 << (vec + 1);
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(unsigned int timer, unsigned int level)
-{
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
 }
 
 /***************************************************************************/
@@ -117,15 +98,20 @@ void m5206_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
 	mach_reset = m5206_cpu_reset;
+	m5206_timers_init();
+	m5206_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5206_uarts_init();
 	platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5206/gpio.c b/arch/m68knommu/platform/5206/gpio.c
new file mode 100644
index 00000000000..60f779ce165
--- /dev/null
+++ b/arch/m68knommu/platform/5206/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile
index a439d9ab3f2..113c3339006 100644
--- a/arch/m68knommu/platform/5206e/Makefile
+++ b/arch/m68knommu/platform/5206e/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 65887799db8..0f41ba82a3b 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -15,6 +15,7 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
 #include <asm/mcfuart.h>
 
@@ -49,11 +50,11 @@ static void __init m5206e_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -68,38 +69,19 @@ static void __init m5206e_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-	unsigned char		icr;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		vec -= 25;
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
-		*(mbar + MCFSIM_ICR1 + vec) = icr;
-		vec = 0x1 << (vec + 1);
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5206e_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
 }
 
 /***************************************************************************/
@@ -117,8 +99,6 @@ void m5206e_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if defined(CONFIG_NETtel)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
@@ -126,13 +106,19 @@ void __init config_BSP(char *commandp, int size)
 #endif /* CONFIG_NETtel */
 
 	mach_reset = m5206e_cpu_reset;
+	m5206e_timers_init();
+	m5206e_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5206e_uarts_init();
 	platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5206e/gpio.c b/arch/m68knommu/platform/5206e/gpio.c
new file mode 100644
index 00000000000..60f779ce165
--- /dev/null
+++ b/arch/m68knommu/platform/5206e/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
index a50e76acc8f..435ab3483dc 100644
--- a/arch/m68knommu/platform/520x/Makefile
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -14,4 +14,4 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 1c43a8aec69..92614de42cd 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -81,20 +81,11 @@ static struct platform_device *m520x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m520x_uart_init_line(int line, int irq)
 {
-	u32 imr;
 	u16 par;
 	u8 par2;
 
-	writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	switch (line) {
 	case 0:
 		par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
@@ -131,18 +122,8 @@ static void __init m520x_uarts_init(void)
 
 static void __init m520x_fec_init(void)
 {
-	u32 imr;
 	u8 v;
 
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 36);
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40);
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42);
-
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0x0001FFF0;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-
 	/* Set multi-function pins to ethernet mode */
 	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC);
 	writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC);
@@ -153,17 +134,6 @@ static void __init m520x_fec_init(void)
 
 /***************************************************************************/
 
-/*
- *  Program the vector to be an auto-vectored.
- */
-
-void mcf_autovector(unsigned int vec)
-{
-    /* Everything is auto-vectored on the 520x devices */
-}
-
-/***************************************************************************/
-
 static void m520x_cpu_reset(void)
 {
 	local_irq_disable();
diff --git a/arch/m68knommu/platform/520x/gpio.c b/arch/m68knommu/platform/520x/gpio.c
new file mode 100644
index 00000000000..15b5bb62a69
--- /dev/null
+++ b/arch/m68knommu/platform/520x/gpio.c
@@ -0,0 +1,211 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BE",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BE,
+		.podr				= MCFGPIO_PODR_BE,
+		.ppdr				= MCFGPIO_PPDSDR_BE,
+		.setr				= MCFGPIO_PPDSDR_BE,
+		.clrr				= MCFGPIO_PCLRR_BE,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 25,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,