Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 150 insertions, 0 deletions

diff --git a/arch/m68k/ifpsp060/ilsp.doc b/arch/m68k/ifpsp060/ilsp.doc
new file mode 100644
index 00000000000..f6fae6d900a
--- /dev/null
+++ b/arch/m68k/ifpsp060/ilsp.doc
@@ -0,0 +1,150 @@
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
+M68000 Hi-Performance Microprocessor Division
+M68060 Software Package
+Production Release P1.00 -- October 10, 1994
+
+M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.
+
+THE SOFTWARE is provided on an "AS IS" basis and without warranty.
+To the maximum extent permitted by applicable law,
+MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
+INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+and any warranty against infringement with regard to the SOFTWARE
+(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
+
+To the maximum extent permitted by applicable law,
+IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
+(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
+BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
+ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
+Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
+
+You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
+so long as this entire notice is retained without alteration in any modified and/or
+redistributed versions, and that such modified versions are clearly identified as such.
+No licenses are granted by implication, estoppel or otherwise under any patents
+or trademarks of Motorola, Inc.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+68060 INTEGER SOFTWARE PACKAGE (Library version)
+-------------------------------------------------
+
+The file ilsp.s contains the "Library version" of the
+68060 Integer Software Package. Routines included in this
+module can be used to emulate 64-bit divide and multiply,
+and the "cmp2" instruction. These instructions are not
+implemented in hardware on the 68060 and normally take
+exception vector #61 "Unimplemented Integer Instruction".
+
+By re-compiling a program that uses these instructions, and
+making subroutine calls in place of the unimplemented
+instructions, a program can avoid the overhead associated with
+taking the exception.
+
+Release file format:
+--------------------
+The file ilsp.sa is essentially a hexadecimal image of the
+release package. This is the ONLY format which will be supported.
+The hex image was created by assembling the source code and
+then converting the resulting binary output image into an
+ASCII text file. The hexadecimal numbers are listed
+using the Motorola Assembly Syntax assembler directive "dc.l"
+(define constant longword). The file can be converted to other
+assembly syntaxes by using any word processor with a global
+search and replace function.
+
+To assist in assembling and linking this module with other modules,
+the installer should add a symbolic label to the top of the file.
+This will allow calling routines to access the entry points
+of this package.
+
+The source code ilsp.s has also been included but only for
+documentation purposes.
+
+Release file structure:
+-----------------------
+The file ilsp.sa contains an "Entry-Point" section and a
+code section. The ILSP has no "Call-Out" section. The first section
+is the "Entry-Point" section. In order to access a function in the
+package, a program must "bsr" or "jsr" to the location listed
+below in "68060ILSP Entry Points" that corresponds to the desired
+function. A branch instruction located at the selected entry point
+within the package will then enter the correct emulation code routine.
+
+The entry point addresses at the beginning of the package will remain
+fixed so that a program calling the routines will not have to be
+re-compiled with every new 68060ILSP release.
+
+For example, to use a 64-bit multiply instruction,
+do a "bsr" or "jsr" to the entry point defined by
+the 060ILSP entry table. A compiler generated code sequence
+for unsigned multiply could look like:
+
+# mulu.l <ea>,Dh:Dl
+# mulu.l _multiplier,%d1:%d0
+
+	subq.l	&0x8,%sp	# make room for result on stack
+	pea	(%sp)		# pass: result addr on stack
+	mov.l	%d0,-(%sp)	# pass: multiplicand on stack
+	mov.l	_multiplier,-(%sp) # pass: multiplier on stack
+	bsr.l	_060LISP_TOP+0x18 # branch to multiply routine
+	add.l	&0xc,%sp	# clear arguments from stack
+	mov.l	(%sp)+,%d1	# load result[63:32]
+	mov.l	(%sp)+,%d0	# load result[31:0]
+
+For a divide:
+
+# divu.l <ea>,Dr:Dq
+# divu.l _divisor,%d1:%d0
+
+	subq.l	&0x8,%sp	# make room for result on stack
+	pea	(%sp)		# pass: result addr on stack
+	mov.l	%d0,-(%sp)	# pass: dividend hi on stack
+	mov.l	%d1,-(%sp)	# pass: dividend hi on stack
+	mov.l	_divisor,-(%sp) # pass: divisor on stack
+	bsr.l	_060LISP_TOP+0x08 # branch to divide routine
+	add.l	&0xc,%sp	# clear arguments from stack
+	mov.l	(%sp)+,%d1	# load remainder
+	mov.l	(%sp)+,%d0	# load quotient
+
+The library routines also return the correct condition code
+register value. If this is important, then the caller of the library
+routine must make sure that the value isn't lost while popping
+other items off of the stack.
+
+An example of using the "cmp2" instruction is as follows:
+
+# cmp2.l <ea>,Rn
+# cmp2.l _bounds,%d0
+
+	pea	_bounds		# pass ptr to bounds
+	mov.l	%d0,-(%sp)	# pass Rn
+	bsr.l	_060LSP_TOP_+0x48 # branch to "cmp2" routine
+	mov.w	%cc,_tmp	# save off condition codes
+	addq.l	&0x8,%sp	# clear arguments from stack
+
+Exception reporting:
+--------------------
+If the instruction being emulated is a divide and the source
+operand is a zero, then the library routine, as its last
+instruction, executes an implemented divide using a zero
+source operand so that an "Integer Divide-by-Zero" exception
+will be taken. Although the exception stack frame will not
+point to the correct instruction, the user will at least be able
+to record that such an event occurred if desired.
+
+68060ILSP entry points:
+-----------------------
+_060ILSP_TOP:
+0x000:	_060LSP__idivs64_
+0x008:	_060LSP__idivu64_
+
+0x010:	_060LSP__imuls64_
+0x018:	_060LSP__imulu64_
+
+0x020:	_060LSP__cmp2_Ab_
+0x028:	_060LSP__cmp2_Aw_
+0x030:	_060LSP__cmp2_Al_
+0x038:	_060LSP__cmp2_Db_
+0x040:	_060LSP__cmp2_Dw_
+0x048:	_060LSP__cmp2_Dl_