Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

4 files changed, 727 insertions, 0 deletions

diff --git a/arch/m68k/bvme6000/Makefile b/arch/m68k/bvme6000/Makefile
new file mode 100644
index 00000000000..2348e6ceed1
--- /dev/null
+++ b/arch/m68k/bvme6000/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Linux arch/m68k/bvme6000 source directory
+#
+
+obj-y		:= config.o bvmeints.o rtc.o
diff --git a/arch/m68k/bvme6000/bvmeints.c b/arch/m68k/bvme6000/bvmeints.c
new file mode 100644
index 00000000000..298a8df0266
--- /dev/null
+++ b/arch/m68k/bvme6000/bvmeints.c
@@ -0,0 +1,160 @@
+/*
+ * arch/m68k/bvme6000/bvmeints.c
+ *
+ * Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk]
+ *
+ * based on amiints.c -- Amiga Linux interrupt handling code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/seq_file.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/traps.h>
+
+static irqreturn_t bvme6000_defhand (int irq, void *dev_id, struct pt_regs *fp);
+
+/*
+ * This should ideally be 4 elements only, for speed.
+ */
+
+static struct {
+	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+	unsigned	count;
+} irq_tab[256];
+
+/*
+ * void bvme6000_init_IRQ (void)
+ *
+ * Parameters:	None
+ *
+ * Returns:	Nothing
+ *
+ * This function is called during kernel startup to initialize
+ * the bvme6000 IRQ handling routines.
+ */
+
+void bvme6000_init_IRQ (void)
+{
+	int i;
+
+	for (i = 0; i < 256; i++) {
+		irq_tab[i].handler = bvme6000_defhand;
+		irq_tab[i].flags = IRQ_FLG_STD;
+		irq_tab[i].dev_id = NULL;
+		irq_tab[i].devname = NULL;
+		irq_tab[i].count = 0;
+	}
+}
+
+int bvme6000_request_irq(unsigned int irq,
+		irqreturn_t (*handler)(int, void *, struct pt_regs *),
+                unsigned long flags, const char *devname, void *dev_id)
+{
+	if (irq > 255) {
+		printk("%s: Incorrect IRQ %d from %s\n", __FUNCTION__, irq, devname);
+		return -ENXIO;
+	}
+#if 0
+	/* Nothing special about auto-vectored devices for the BVME6000,
+	 * but treat it specially to avoid changes elsewhere.
+	 */
+
+	if (irq >= VEC_INT1 && irq <= VEC_INT7)
+		return cpu_request_irq(irq - VEC_SPUR, handler, flags,
+						devname, dev_id);
+#endif
+	if (!(irq_tab[irq].flags & IRQ_FLG_STD)) {
+		if (irq_tab[irq].flags & IRQ_FLG_LOCK) {
+			printk("%s: IRQ %d from %s is not replaceable\n",
+			       __FUNCTION__, irq, irq_tab[irq].devname);
+			return -EBUSY;
+		}
+		if (flags & IRQ_FLG_REPLACE) {
+			printk("%s: %s can't replace IRQ %d from %s\n",
+			       __FUNCTION__, devname, irq, irq_tab[irq].devname);
+			return -EBUSY;
+		}
+	}
+	irq_tab[irq].handler = handler;
+	irq_tab[irq].flags   = flags;
+	irq_tab[irq].dev_id  = dev_id;
+	irq_tab[irq].devname = devname;
+	return 0;
+}
+
+void bvme6000_free_irq(unsigned int irq, void *dev_id)
+{
+	if (irq > 255) {
+		printk("%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
+		return;
+	}
+#if 0
+	if (irq >= VEC_INT1 && irq <= VEC_INT7) {
+		cpu_free_irq(irq - VEC_SPUR, dev_id);
+		return;
+	}
+#endif
+	if (irq_tab[irq].dev_id != dev_id)
+		printk("%s: Removing probably wrong IRQ %d from %s\n",
+		       __FUNCTION__, irq, irq_tab[irq].devname);
+
+	irq_tab[irq].handler = bvme6000_defhand;
+	irq_tab[irq].flags   = IRQ_FLG_STD;
+	irq_tab[irq].dev_id  = NULL;
+	irq_tab[irq].devname = NULL;
+}
+
+irqreturn_t bvme6000_process_int (unsigned long vec, struct pt_regs *fp)
+{
+	if (vec > 255) {
+		printk ("bvme6000_process_int: Illegal vector %ld", vec);
+		return IRQ_NONE;
+	} else {
+		irq_tab[vec].count++;
+		irq_tab[vec].handler(vec, irq_tab[vec].dev_id, fp);
+		return IRQ_HANDLED;
+	}
+}
+
+int show_bvme6000_interrupts(struct seq_file *p, void *v)
+{
+	int i;
+
+	for (i = 0; i < 256; i++) {
+		if (irq_tab[i].count)
+			seq_printf(p, "Vec 0x%02x: %8d  %s\n",
+			    i, irq_tab[i].count,
+			    irq_tab[i].devname ? irq_tab[i].devname : "free");
+	}
+	return 0;
+}
+
+
+static irqreturn_t bvme6000_defhand (int irq, void *dev_id, struct pt_regs *fp)
+{
+	printk ("Unknown interrupt 0x%02x\n", irq);
+	return IRQ_NONE;
+}
+
+void bvme6000_enable_irq (unsigned int irq)
+{
+}
+
+
+void bvme6000_disable_irq (unsigned int irq)
+{
+}
+
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
new file mode 100644
index 00000000000..3ffc84f9c29
--- /dev/null
+++ b/arch/m68k/bvme6000/config.c
@@ -0,0 +1,380 @@
+/*
+ *  arch/m68k/bvme6000/config.c
+ *
+ *  Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk]
+ *
+ * Based on:
+ *
+ *  linux/amiga/config.c
+ *
+ *  Copyright (C) 1993 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file README.legal in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/genhd.h>
+#include <linux/rtc.h>
+#include <linux/interrupt.h>
+
+#include <asm/bootinfo.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/rtc.h>
+#include <asm/machdep.h>
+#include <asm/bvme6000hw.h>
+
+extern irqreturn_t bvme6000_process_int (int level, struct pt_regs *regs);
+extern void bvme6000_init_IRQ (void);
+extern void bvme6000_free_irq (unsigned int, void *);
+extern int  show_bvme6000_interrupts(struct seq_file *, void *);
+extern void bvme6000_enable_irq (unsigned int);
+extern void bvme6000_disable_irq (unsigned int);
+static void bvme6000_get_model(char *model);
+static int  bvme6000_get_hardware_list(char *buffer);
+extern int  bvme6000_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname, void *dev_id);
+extern void bvme6000_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+extern unsigned long bvme6000_gettimeoffset (void);
+extern int bvme6000_hwclk (int, struct rtc_time *);
+extern int bvme6000_set_clock_mmss (unsigned long);
+extern void bvme6000_reset (void);
+extern void bvme6000_waitbut(void);
+void bvme6000_set_vectors (void);
+
+static unsigned char bcd2bin (unsigned char b);
+static unsigned char bin2bcd (unsigned char b);
+
+/* Save tick handler routine pointer, will point to do_timer() in
+ * kernel/sched.c, called via bvme6000_process_int() */
+
+static irqreturn_t (*tick_handler)(int, void *, struct pt_regs *);
+
+
+int bvme6000_parse_bootinfo(const struct bi_record *bi)
+{
+	if (bi->tag == BI_VME_TYPE)
+		return 0;
+	else
+		return 1;
+}
+
+void bvme6000_reset(void)
+{
+	volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
+
+	printk ("\r\n\nCalled bvme6000_reset\r\n"
+			"\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r");
+	/* The string of returns is to delay the reset until the whole
+	 * message is output. */
+	/* Enable the watchdog, via PIT port C bit 4 */
+
+	pit->pcddr	|= 0x10;	/* WDOG enable */
+
+	while(1)
+		;
+}
+
+static void bvme6000_get_model(char *model)
+{
+    sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4);
+}
+
+
+/* No hardware options on BVME6000? */
+
+static int bvme6000_get_hardware_list(char *buffer)
+{
+    *buffer = '\0';
+    return 0;
+}
+
+
+void __init config_bvme6000(void)
+{
+    volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
+
+    /* Board type is only set by newer versions of vmelilo/tftplilo */
+    if (!vme_brdtype) {
+	if (m68k_cputype == CPU_68060)
+	    vme_brdtype = VME_TYPE_BVME6000;
+	else
+	    vme_brdtype = VME_TYPE_BVME4000;
+    }
+#if 0
+    /* Call bvme6000_set_vectors() so ABORT will work, along with BVMBug
+     * debugger.  Note trap_init() will splat the abort vector, but
+     * bvme6000_init_IRQ() will put it back again.  Hopefully. */
+
+    bvme6000_set_vectors();
+#endif
+
+    mach_max_dma_address = 0xffffffff;
+    mach_sched_init      = bvme6000_sched_init;
+    mach_init_IRQ        = bvme6000_init_IRQ;
+    mach_gettimeoffset   = bvme6000_gettimeoffset;
+    mach_hwclk           = bvme6000_hwclk;
+    mach_set_clock_mmss	 = bvme6000_set_clock_mmss;
+    mach_reset		 = bvme6000_reset;
+    mach_free_irq	 = bvme6000_free_irq;
+    mach_process_int	 = bvme6000_process_int;
+    mach_get_irq_list	 = show_bvme6000_interrupts;
+    mach_request_irq	 = bvme6000_request_irq;
+    enable_irq		 = bvme6000_enable_irq;
+    disable_irq          = bvme6000_disable_irq;
+    mach_get_model       = bvme6000_get_model;
+    mach_get_hardware_list = bvme6000_get_hardware_list;
+
+    printk ("Board is %sconfigured as a System Controller\n",
+		*config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not ");
+
+    /* Now do the PIT configuration */
+
+    pit->pgcr	= 0x00;	/* Unidirectional 8 bit, no handshake for now */
+    pit->psrr	= 0x18;	/* PIACK and PIRQ fucntions enabled */
+    pit->pacr	= 0x00;	/* Sub Mode 00, H2 i/p, no DMA */
+    pit->padr	= 0x00;	/* Just to be tidy! */
+    pit->paddr	= 0x00;	/* All inputs for now (safest) */
+    pit->pbcr	= 0x80;	/* Sub Mode 1x, H4 i/p, no DMA */
+    pit->pbdr	= 0xbc | (*config_reg_ptr & BVME_CONFIG_SW1 ? 0 : 0x40);
+			/* PRI, SYSCON?, Level3, SCC clks from xtal */
+    pit->pbddr	= 0xf3;	/* Mostly outputs */
+    pit->pcdr	= 0x01;	/* PA transceiver disabled */
+    pit->pcddr	= 0x03;	/* WDOG disable */
+
+    /* Disable snooping for Ethernet and VME accesses */
+
+    bvme_acr_addrctl = 0;
+}
+
+
+irqreturn_t bvme6000_abort_int (int irq, void *dev_id, struct pt_regs *fp)
+{
+        unsigned long *new = (unsigned long *)vectors;
+        unsigned long *old = (unsigned long *)0xf8000000;
+
+        /* Wait for button release */
+        while (*(volatile unsigned char *)BVME_LOCAL_IRQ_STAT & BVME_ABORT_STATUS)
+                ;
+
+        *(new+4) = *(old+4);            /* Illegal instruction */
+        *(new+9) = *(old+9);            /* Trace */
+        *(new+47) = *(old+47);          /* Trap #15 */
+        *(new+0x1f) = *(old+0x1f);      /* ABORT switch */
+	return IRQ_HANDLED;
+}
+
+
+static irqreturn_t bvme6000_timer_int (int irq, void *dev_id, struct pt_regs *fp)
+{
+    volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
+    unsigned char msr = rtc->msr & 0xc0;
+
+    rtc->msr = msr | 0x20;		/* Ack the interrupt */
+
+    return tick_handler(irq, dev_id, fp);
+}
+
+/*
+ * Set up the RTC timer 1 to mode 2, so T1 output toggles every 5ms
+ * (40000 x 125ns).  It will interrupt every 10ms, when T1 goes low.
+ * So, when reading the elapsed time, you should read timer1,
+ * subtract it from 39999, and then add 40000 if T1 is high.
+ * That gives you the number of 125ns ticks in to the 10ms period,
+ * so divide by 8 to get the microsecond result.
+ */
+
+void bvme6000_sched_init (irqreturn_t (*timer_routine)(int, void *, struct pt_regs *))
+{
+    volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
+    unsigned char msr = rtc->msr & 0xc0;
+
+    rtc->msr = 0;	/* Ensure timer registers accessible */
+
+    tick_handler = timer_routine;
+    if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, 0,
+				"timer", bvme6000_timer_int))
+	panic ("Couldn't register timer int");
+
+    rtc->t1cr_omr = 0x04;	/* Mode 2, ext clk */
+    rtc->t1msb = 39999 >> 8;
+    rtc->t1lsb = 39999 & 0xff;
+    rtc->irr_icr1 &= 0xef;	/* Route timer 1 to INTR pin */
+    rtc->msr = 0x40;		/* Access int.cntrl, etc */
+    rtc->pfr_icr0 = 0x80;	/* Just timer 1 ints enabled */
+    rtc->irr_icr1 = 0;
+    rtc->t1cr_omr = 0x0a;	/* INTR+T1 active lo, push-pull */
+    rtc->t0cr_rtmr &= 0xdf;	/* Stop timers in standby */
+    rtc->msr = 0;		/* Access timer 1 control */
+    rtc->t1cr_omr = 0x05;	/* Mode 2, ext clk, GO */
+
+    rtc->msr = msr;
+
+    if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0,
+				"abort", bvme6000_abort_int))
+	panic ("Couldn't register abort int");
+}
+
+
+/* This is always executed with interrupts disabled.  */
+
+/*
+ * NOTE:  Don't accept any readings within 5us of rollover, as
+ * the T1INT bit may be a little slow getting set.  There is also
+ * a fault in the chip, meaning that reads may produce invalid
+ * results...
+ */
+
+unsigned long bvme6000_gettimeoffset (void)
+{
+    volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
+    volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
+    unsigned char msr = rtc->msr & 0xc0;
+    unsigned char t1int, t1op;
+    unsigned long v = 800000, ov;
+
+    rtc->msr = 0;	/* Ensure timer registers accessible */
+
+    do {
+	ov = v;
+	t1int = rtc->msr & 0x20;
+	t1op  = pit->pcdr & 0x04;
+	rtc->t1cr_omr |= 0x40;		/* Latch timer1 */
+	v = rtc->t1msb << 8;		/* Read timer1 */
+	v |= rtc->t1lsb;		/* Read timer1 */
+    } while (t1int != (rtc->msr & 0x20) ||
+		t1op != (pit->pcdr & 0x04) ||
+			abs(ov-v) > 80 ||
+				v > 39960);
+
+    v = 39999 - v;
+    if (!t1op)				/* If in second half cycle.. */
+	v += 40000;
+    v /= 8;				/* Convert ticks to microseconds */
+    if (t1int)
+	v += 10000;			/* Int pending, + 10ms */
+    rtc->msr = msr;
+
+    return v;
+}
+
+static unsigned char bcd2bin (unsigned char b)
+{
+	return ((b>>4)*10 + (b&15));
+}
+
+static unsigned char bin2bcd (unsigned char b)
+{
+	return (((b/10)*16) + (b%10));
+}
+
+
+/*
+ * Looks like op is non-zero for setting the clock, and zero for
+ * reading the clock.
+ *
+ *  struct hwclk_time {
+ *         unsigned        sec;       0..59
+ *         unsigned        min;       0..59
+ *         unsigned        hour;      0..23
+ *         unsigned        day;       1..31
+ *         unsigned        mon;       0..11
+ *         unsigned        year;      00...
+ *         int             wday;      0..6, 0 is Sunday, -1 means unknown/don't set
+ * };
+ */
+
+int bvme6000_hwclk(int op, struct rtc_time *t)
+{
+	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
+	unsigned char msr = rtc->msr & 0xc0;
+
+	rtc->msr = 0x40;	/* Ensure clock and real-time-mode-register
+				 * are accessible */
+	if (op)
+	{	/* Write.... */
+		rtc->t0cr_rtmr = t->tm_year%4;
+		rtc->bcd_tenms = 0;
+		rtc->bcd_sec = bin2bcd(t->tm_sec);
+		rtc->bcd_min = bin2bcd(t->tm_min);
+		rtc->bcd_hr  = bin2bcd(t->tm_hour);
+		rtc->bcd_dom = bin2bcd(t->tm_mday);
+		rtc->bcd_mth = bin2bcd(t->tm_mon + 1);
+		rtc->bcd_year = bin2bcd(t->tm_year%100);
+		if (t->tm_wday >= 0)
+			rtc->bcd_dow = bin2bcd(t->tm_wday+1);
+		rtc->t0cr_rtmr = t->tm_year%4 | 0x08;
+	}
+	else
+	{	/* Read....  */
+		do {
+			t->tm_sec  = bcd2bin(rtc->bcd_sec);
+			t->tm_min  = bcd2bin(rtc->bcd_min);
+			t->tm_hour = bcd2bin(rtc->bcd_hr);
+			t->tm_mday = bcd2bin(rtc->bcd_dom);
+			t->tm_mon  = bcd2bin(rtc->bcd_mth)-1;
+			t->tm_year = bcd2bin(rtc->bcd_year);
+			if (t->tm_year < 70)
+				t->tm_year += 100;
+			t->tm_wday = bcd2bin(rtc->bcd_dow)-1;
+		} while (t->tm_sec != bcd2bin(rtc->bcd_sec));
+	}
+
+	rtc->msr = msr;
+
+	return 0;
+}
+
+/*
+ * Set the minutes and seconds from seconds value 'nowtime'.  Fail if
+ * clock is out by > 30 minutes.  Logic lifted from atari code.
+ * Algorithm is to wait for the 10ms register to change, and then to
+ * wait a short while, and then set it.
+ */
+
+int bvme6000_set_clock_mmss (unsigned long nowtime)
+{
+	int retval = 0;
+	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+	unsigned char rtc_minutes, rtc_tenms;
+	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
+	unsigned char msr = rtc->msr & 0xc0;
+	unsigned long flags;
+	volatile int i;
+
+	rtc->msr = 0;		/* Ensure clock accessible */
+	rtc_minutes = bcd2bin (rtc->bcd_min);
+
+	if ((rtc_minutes < real_minutes
+		? real_minutes - rtc_minutes
+			: rtc_minutes - real_minutes) < 30)
+	{
+		local_irq_save(flags);
+		rtc_tenms = rtc->bcd_tenms;
+		while (rtc_tenms == rtc->bcd_tenms)
+			;
+		for (i = 0; i < 1000; i++)
+			;
+		rtc->bcd_min = bin2bcd(real_minutes);
+		rtc->bcd_sec = bin2bcd(real_seconds);
+		local_irq_restore(flags);
+	}
+	else
+		retval = -1;
+
+	rtc->msr = msr;
+
+	return retval;
+}
+
diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c
new file mode 100644
index 00000000000..c6b2a410bf9
--- /dev/null
+++ b/arch/m68k/bvme6000/rtc.c
@@ -0,0 +1,182 @@
+/*
+ *	Real Time Clock interface for Linux on the BVME6000
+ *
+ * Based on the PC driver by Paul Gortmaker.
+ */
+
+#define RTC_VERSION		"1.00"
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/mc146818rtc.h>	/* For struct rtc_time and ioctls, etc */
+#include <linux/smp_lock.h>
+#include <asm/bvme6000hw.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/setup.h>
+
+/*
+ *	We sponge a minor off of the misc major. No need slurping
+ *	up another valuable major dev number for this. If you add
+ *	an ioctl, make sure you don't conflict with SPARC's RTC
+ *	ioctls.
+ */
+
+#define BCD2BIN(val) (((val)&15) + ((val)>>4)*10)
+#define BIN2BCD(val) ((((val)/10)<<4) + (val)%10)
+
+static unsigned char days_in_mo[] =
+{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
+
+static char rtc_status;
+
+static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+		     unsigned long arg)
+{
+	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
+	unsigned char msr;
+	unsigned long flags;
+	struct rtc_time wtime;
+
+	switch (cmd) {
+	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
+	{
+		local_irq_save(flags);
+		/* Ensure clock and real-time-mode-register are accessible */
+		msr = rtc->msr & 0xc0;
+		rtc->msr = 0x40;
+		memset(&wtime, 0, sizeof(struct rtc_time));
+		do {
+			wtime.tm_sec =  BCD2BIN(rtc->bcd_sec);
+			wtime.tm_min =  BCD2BIN(rtc->bcd_min);
+			wtime.tm_hour = BCD2BIN(rtc->bcd_hr);
+			wtime.tm_mday =  BCD2BIN(rtc->bcd_dom);
+			wtime.tm_mon =  BCD2BIN(rtc->bcd_mth)-1;
+			wtime.tm_year = BCD2BIN(rtc->bcd_year);
+			if (wtime.tm_year < 70)
+				wtime.tm_year += 100;
+			wtime.tm_wday = BCD2BIN(rtc->bcd_dow)-1;
+		} while (wtime.tm_sec != BCD2BIN(rtc->bcd_sec));
+		rtc->msr = msr;
+		local_irq_restore(flags);
+		return copy_to_user((void *)arg, &wtime, sizeof wtime) ?
+								-EFAULT : 0;
+	}
+	case RTC_SET_TIME:	/* Set the RTC */
+	{
+		struct rtc_time rtc_tm;
+		unsigned char mon, day, hrs, min, sec, leap_yr;
+		unsigned int yrs;
+
+		if (!capable(CAP_SYS_ADMIN))
+			return -EACCES;
+
+		if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
+				   sizeof(struct rtc_time)))
+			return -EFAULT;
+
+		yrs = rtc_tm.tm_year;
+		if (yrs < 1900)
+			yrs += 1900;
+		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
+		day = rtc_tm.tm_mday;
+		hrs = rtc_tm.tm_hour;
+		min = rtc_tm.tm_min;
+		sec = rtc_tm.tm_sec;
+
+		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
+
+		if ((mon > 12) || (mon < 1) || (day == 0))
+			return -EINVAL;
+
+		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
+			return -EINVAL;
+
+		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
+			return -EINVAL;
+
+		if (yrs >= 2070)
+			return -EINVAL;
+
+		local_irq_save(flags);
+		/* Ensure clock and real-time-mode-register are accessible */
+		msr = rtc->msr & 0xc0;
+		rtc->msr = 0x40;
+
+		rtc->t0cr_rtmr = yrs%4;
+		rtc->bcd_tenms = 0;
+		rtc->bcd_sec   = BIN2BCD(sec);
+		rtc->bcd_min   = BIN2BCD(min);
+		rtc->bcd_hr    = BIN2BCD(hrs);
+		rtc->bcd_dom   = BIN2BCD(day);
+		rtc->bcd_mth   = BIN2BCD(mon);
+		rtc->bcd_year  = BIN2BCD(yrs%100);
+		if (rtc_tm.tm_wday >= 0)
+			rtc->bcd_dow = BIN2BCD(rtc_tm.tm_wday+1);
+		rtc->t0cr_rtmr = yrs%4 | 0x08;
+
+		rtc->msr = msr;
+		local_irq_restore(flags);
+		return 0;
+	}
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ *	We enforce only one user at a time here with the open/close.
+ *	Also clear the previous interrupt data on an open, and clean
+ *	up things on a close.
+ */
+
+static int rtc_open(struct inode *inode, struct file *file)
+{
+	if(rtc_status)
+		return -EBUSY;
+
+	rtc_status = 1;
+	return 0;
+}
+
+static int rtc_release(struct inode *inode, struct file *file)
+{
+	lock_kernel();
+	rtc_status = 0;
+	unlock_kernel();
+	return 0;
+}
+
+/*
+ *	The various file operations we support.
+ */
+
+static struct file_operations rtc_fops = {
+	.ioctl =	rtc_ioctl,
+	.open =		rtc_open,
+	.release =	rtc_release,
+};
+
+static struct miscdevice rtc_dev = {
+	.minor =	RTC_MINOR,
+	.name =		"rtc",
+	.fops =		&rtc_fops
+};
+
+int __init rtc_DP8570A_init(void)
+{
+	if (!MACH_IS_BVME6000)
+		return -ENODEV;
+
+	printk(KERN_INFO "DP8570A Real Time Clock Driver v%s\n", RTC_VERSION);
+	return misc_register(&rtc_dev);
+}
+