m68k: reorganize Kconfig options to improve mmu/non-mmu selections

The current mmu and non-mmu Kconfig files can be merged to form
a more general selection of options. The current break up of options
is due to the simple brute force merge from the m68k and m68knommu
arch directories.

Many of the options are not at all specific to having the MMU enabled
or not. They are actually associated with a particular CPU type or
platform type.

Ultimately as we support all processors with the MMU disabled we need
many of these options to be selectable without the MMU option enabled.
And likewise some of the ColdFire processors, which currently are only
supported with the MMU disabled, do have MMU hardware, and will need
to have options selected on CPU type, not MMU disabled.

This patch removes the old mmu and non-mmu Kconfigs and instead breaks
up the configuration into four areas: cpu, machine, bus, devices.

The Kconfig.cpu lists all the options associated with selecting a CPU,
and includes options specific to each CPU type as well.

Kconfig.machine lists all options associated with selecting a machine
type. Almost always the machines selectable is restricted by the chosen
CPU.

Kconfig.bus contains options associated with selecting bus types on the
various machine types. That includes PCI bus, PCMCIA bus, etc.

Kconfig.devices contains options for drivers and driver associated
options.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 411 deletions

diff --git a/arch/m68k/Kconfig.mmu b/arch/m68k/Kconfig.mmu
deleted file mode 100644
index 13e20bbc407..00000000000
--- a/arch/m68k/Kconfig.mmu
+++ /dev/null
@@ -1,411 +0,0 @@
-config GENERIC_IOMAP
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	depends on BROKEN && (Q40 || SUN3X)
-	default y
-
-config ARCH_USES_GETTIMEOFFSET
-	def_bool y
-
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
-config MCA
-	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
-config PCMCIA
-	tristate
-	---help---
-	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
-	  computer.  These are credit-card size devices such as network cards,
-	  modems or hard drives often used with laptops computers.  There are
-	  actually two varieties of these cards: the older 16 bit PCMCIA cards
-	  and the newer 32 bit CardBus cards.  If you want to use CardBus
-	  cards, you need to say Y here and also to "CardBus support" below.
-
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  Please also read the PCMCIA-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as modules, choose M here: the
-	  modules will be called pcmcia_core and ds.
-
-config AMIGA
-	bool "Amiga support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Amiga series of computers. If
-	  you plan to use this kernel on an Amiga, say Y here and browse the
-	  material available in <file:Documentation/m68k>; otherwise say N.
-
-config ATARI
-	bool "Atari support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the 68000-based Atari series of
-	  computers (including the TT, Falcon and Medusa). If you plan to use
-	  this kernel on an Atari, say Y here and browse the material
-	  available in <file:Documentation/m68k>; otherwise say N.
-
-config MAC
-	bool "Macintosh support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Apple Macintosh series of
-	  computers (yes, there is experimental support now, at least for part
-	  of the series).
-
-	  Say N unless you're willing to code the remaining necessary support.
-	  ;)
-
-config NUBUS
-	bool
-	depends on MAC
-	default y
-
-config M68K_L2_CACHE
-	bool
-	depends on MAC
-	default y
-
-config APOLLO
-	bool "Apollo support"
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to run Linux on an MC680x0-based Apollo
-	  Domain workstation such as the DN3500.
-
-config VME
-	bool "VME (Motorola and BVM) support"
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to build a kernel for a 680x0 based VME
-	  board.  Boards currently supported include Motorola boards MVME147,
-	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
-	  BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
-	bool "MVME147 support"
-	depends on VME
-	help
-	  Say Y to include support for early Motorola VME boards.  This will
-	  build a kernel which can run on MVME147 single-board computers.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
-	bool "MVME162, 166 and 167 support"
-	depends on VME
-	help
-	  Say Y to include support for Motorola VME boards.  This will build a
-	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
-	  MVME177 boards.  If you select this option you will have to select
-	  the appropriate drivers for SCSI, Ethernet and serial ports later
-	  on.
-
-config BVME6000
-	bool "BVME4000 and BVME6000 support"
-	depends on VME
-	help
-	  Say Y to include support for VME boards from BVM Ltd.  This will
-	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
-	bool "HP9000/300 and HP9000/400 support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the HP9000/300 and HP9000/400 series
-	  of workstations. Support for these machines is still somewhat
-	  experimental. If you plan to try to use the kernel on such a machine
-	  say Y here.
-	  Everybody else says N.
-
-config DIO
-	bool "DIO bus support"
-	depends on HP300
-	default y
-	help
-	  Say Y here to enable support for the "DIO" expansion bus used in
-	  HP300 machines. If you are using such a system you almost certainly
-	  want this.
-
-config SUN3X
-	bool "Sun3x support"
-	select MMU_MOTOROLA if MMU
-	select M68030
-	help
-	  This option enables support for the Sun 3x series of workstations.
-	  Be warned that this support is very experimental.
-	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
-	  General Linux information on the Sun 3x series (now discontinued)
-	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you don't want to compile a kernel for a Sun 3x, say N.
-
-config Q40
-	bool "Q40/Q60 support"
-	select MMU_MOTOROLA if MMU
-	help
-	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
-	  manufactured in Germany.  There is an official Q40 home page at
-	  <http://www.q40.de/>.  This option enables support for the Q40 and
-	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
-	  emulation.
-
-config SUN3
-	bool "Sun3 support"
-	depends on !MMU_MOTOROLA
-	select MMU_SUN3 if MMU
-	select M68020
-	help
-	  This option enables support for the Sun 3 series of workstations
-	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
-	  that all other hardware types must be disabled, as Sun 3 kernels
-	  are incompatible with all other m68k targets (including Sun 3x!).
-
-	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-config NATFEAT
-	bool "ARAnyM emulator support"
-	depends on ATARI
-	help
-	  This option enables support for ARAnyM native features, such as
-	  access to a disk image as /dev/hda.
-
-config NFBLOCK
-	tristate "NatFeat block device support"
-	depends on BLOCK && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat block device
-	  which allows direct access to the hard drives without using
-	  the hardware emulation.
-
-config NFCON
-	tristate "NatFeat console driver"
-	depends on NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat console driver
-	  which allows the console output to be redirected to the stderr
-	  output of ARAnyM.
-
-config NFETH
-	tristate "NatFeat Ethernet support"
-	depends on NET_ETHERNET && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat network device
-	  which will emulate a regular ethernet device while presenting an
-	  ethertap device to the host system.
-
-comment "Processor type"
-
-config M68020
-	bool "68020 support"
-	help
-	  If you anticipate running this kernel on a computer with a MC68020
-	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
-	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
-	  Sun 3, which provides its own version.
-
-config M68030
-	bool "68030 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68030
-	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
-	  work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
-	bool "68040 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68LC040
-	  or MC68040 processor, say Y. Otherwise, say N. Note that an
-	  MC68EC040 will not work, as it does not include an MMU (Memory
-	  Management Unit).
-
-config M68060
-	bool "68060 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68060
-	  processor, say Y. Otherwise, say N.
-
-config MMU_MOTOROLA
-	bool
-
-config MMU_SUN3
-	bool
-	depends on MMU && !MMU_MOTOROLA
-
-config M68KFPU_EMU
-	bool "Math emulation support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  At some point in the future, this will cause floating-point math
-	  instructions to be emulated by the kernel on machines that lack a
-	  floating-point math coprocessor.  Thrill-seekers and chronically
-	  sleep-deprived psychotic hacker types can say Y now, everyone else
-	  should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
-	bool "Math emulation extra precision"
-	depends on M68KFPU_EMU
-	help
-	  The fpu uses normally a few bit more during calculations for
-	  correct rounding, the emulator can (often) do the same but this
-	  extra calculation can cost quite some time, so you can disable
-	  it here. The emulator will then "only" calculate with a 64 bit
-	  mantissa and round slightly incorrect, what is more than enough
-	  for normal usage.
-
-config M68KFPU_EMU_ONLY
-	bool "Math emulation only kernel"
-	depends on M68KFPU_EMU
-	help
-	  This option prevents any floating-point instructions from being
-	  compiled into the kernel, thereby the kernel doesn't save any
-	  floating point context anymore during task switches, so this
-	  kernel will only be usable on machines without a floating-point
-	  math coprocessor. This makes the kernel a bit faster as no tests
-	  needs to be executed whether a floating-point instruction in the
-	  kernel should be executed or not.
-
-config ADVANCED
-	bool "Advanced configuration options"
-	---help---
-	  This gives you access to some advanced options for the CPU. The
-	  defaults should be fine for most users, but these options may make
-	  it possible for you to improve performance somewhat if you know what
-	  you are doing.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these options.
-
-	  Most users should say N to this question.
-
-config RMW_INSNS
-	bool "Use read-modify-write instructions"
-	depends on ADVANCED
-	---help---
-	  This allows to use certain instructions that work with indivisible
-	  read-modify-write bus cycles. While this is faster than the
-	  workaround of disabling interrupts, it can conflict with DMA
-	  ( = direct memory access) on many Amiga systems, and it is also said
-	  to destabilize other machines. It is very likely that this will
-	  cause serious problems on any Amiga or Atari Medusa if set. The only
-	  configuration where it should work are 68030-based Ataris, where it
-	  apparently improves performance. But you've been warned! Unless you
-	  really know what you are doing, say N. Try Y only if you're quite
-	  adventurous.
-
-config SINGLE_MEMORY_CHUNK
-	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
-	default y if SUN3
-	select NEED_MULTIPLE_NODES
-	help
-	  Ignore all but the first contiguous chunk of physical memory for VM
-	  purposes.  This will save a few bytes kernel size and may speed up
-	  some operations.  Say N if not sure.
-
-config 060_WRITETHROUGH
-	bool "Use write-through caching for 68060 supervisor accesses"
-	depends on ADVANCED && M68060
-	---help---
-	  The 68060 generally uses copyback caching of recently accessed data.
-	  Copyback caching means that memory writes will be held in an on-chip
-	  cache and only written back to memory some time later.  Saying Y
-	  here will force supervisor (kernel) accesses to use writethrough
-	  caching.  Writethrough caching means that data is written to memory
-	  straight away, so that cache and memory data always agree.
-	  Writethrough caching is less efficient, but is needed for some
-	  drivers on 68060 based systems where the 68060 bus snooping signal
-	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
-	  this problem.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool !SINGLE_MEMORY_CHUNK
-
-config NODES_SHIFT
-	int
-	default "3"
-	depends on !SINGLE_MEMORY_CHUNK
-
-config ZORRO
-	bool "Amiga Zorro (AutoConfig) bus support"
-	depends on AMIGA
-	help
-	  This enables support for the Zorro bus in the Amiga. If you have
-	  expansion cards in your Amiga that conform to the Amiga
-	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-	  expansion cards that do not fit in the Zorro slots but fit in e.g.
-	  the CPU slot may fall in this category, so you have to say Y to let
-	  Linux use these.
-
-config AMIGA_PCMCIA
-	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
-	depends on AMIGA && EXPERIMENTAL
-	help
-	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-	  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config HEARTBEAT
-	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
-	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
-	bool "/proc/hardware support"
-	help
-	  Say Y here to support the /proc/hardware file, which gives you
-	  access to information about the machine you're running on,
-	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
-	  and memory size.
-
-config ISA
-	bool
-	depends on Q40 || AMIGA_PCMCIA
-	default y
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config GENERIC_ISA_DMA
-	bool
-	depends on Q40 || AMIGA_PCMCIA
-	default y
-
-source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
-