Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 367 insertions, 0 deletions

diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
new file mode 100644
index 00000000000..0d90ea58a0c
--- /dev/null
+++ b/arch/m32r/Kconfig
@@ -0,0 +1,367 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/M32R Kernel Configuration"
+
+config M32R
+	bool
+	default y
+
+config SBUS
+	bool
+
+config UID16
+	bool
+	default n
+
+config GENERIC_ISA_DMA
+	bool
+	default y
+
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
+source "init/Kconfig"
+
+
+menu "Processor type and features"
+
+choice
+	prompt "Platform Type"
+	default PLAT_MAPPI
+
+config PLAT_MAPPI
+	bool "Mappi-I"
+	help
+	  The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
+	  You can operate a Linux system on this board by using an M32R
+	  softmacro core, which is a fully-synthesizable functional model
+	  described in Verilog-HDL.
+
+	  The Mappi-I board was the first platform, which had been used
+	  to port and develop a Linux system for the M32R processor.
+	  Currently, the Mappi-II, an heir to the Mappi-I, is available.
+
+config PLAT_USRV
+	bool "uServer"
+
+config PLAT_M32700UT
+	bool "M32700UT"
+	help
+	  The M3T-M32700UT is an evaluation board based on uT-Engine
+	  specification.  This board has an M32700 (Chaos) evaluation chip.
+	  You can say Y for SMP, because the M32700 is a single chip
+	  multiprocessor.
+
+config PLAT_OPSPUT
+	bool "OPSPUT"
+	help
+	  The OPSPUT is an evaluation board based on uT-Engine
+	  specification.  This board has a OPSP-REP chip.
+
+config PLAT_OAKS32R
+	bool "OAKS32R"
+	help
+	  The OAKS32R is a tiny, inexpensive evaluation board.
+	  Please note that if you say Y here and choose chip "M32102",
+	  say N for MMU and select a no-MMU version kernel, otherwise
+	  a kernel with MMU support will not work, because the M32102
+	  is a microcontroller for embedded systems and it has no MMU.
+
+config PLAT_MAPPI2
+       bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
+
+endchoice
+
+choice
+	prompt "Processor family"
+	default CHIP_M32700
+
+config CHIP_M32700
+	bool "M32700 (Chaos)"
+
+config CHIP_M32102
+	bool "M32102"
+
+config CHIP_VDEC2
+       bool "VDEC2"
+
+config CHIP_OPSP
+       bool "OPSP"
+
+endchoice
+
+config MMU
+	bool "Support for memory management hardware"
+	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+	default y
+
+config TLB_ENTRIES
+       int "TLB Entries"
+       depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+       default 32 if CHIP_M32700 || CHIP_OPSP
+       default 16 if CHIP_VDEC2
+
+
+config ISA_M32R
+        bool
+	depends on CHIP_M32102
+	default y
+
+config ISA_M32R2
+	bool
+	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+	default y
+
+config ISA_DSP_LEVEL2
+	bool
+	depends on CHIP_M32700 || CHIP_OPSP
+	default y
+
+config ISA_DUAL_ISSUE
+	bool
+	depends on CHIP_M32700 || CHIP_OPSP
+	default y
+
+config BUS_CLOCK
+	int "Bus Clock [Hz] (integer)"
+	default "70000000" if PLAT_MAPPI
+	default "25000000" if PLAT_USRV
+	default "50000000" if PLAT_M32700UT
+	default "50000000" if PLAT_OPSPUT
+	default "33333333" if PLAT_OAKS32R
+	default "20000000" if PLAT_MAPPI2
+
+config TIMER_DIVIDE
+	int "Timer divider (integer)"
+	default "128"
+
+config CPU_LITTLE_ENDIAN
+        bool "Generate little endian code"
+	default n
+
+config MEMORY_START
+	hex "Physical memory start address (hex)"
+	default "08000000" if PLAT_MAPPI || PLAT_MAPPI2
+	default "08000000" if PLAT_USRV
+	default "08000000" if PLAT_M32700UT
+	default "08000000" if PLAT_OPSPUT
+	default "01000000" if PLAT_OAKS32R
+
+config MEMORY_SIZE
+	hex "Physical memory size (hex)"
+	default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
+	default "02000000" if PLAT_USRV
+	default "01000000" if PLAT_M32700UT
+	default "01000000" if PLAT_OPSPUT
+	default "00800000" if PLAT_OAKS32R
+
+config NOHIGHMEM
+	bool
+	default y
+
+config DISCONTIGMEM
+	bool "Internal RAM Support"
+	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP
+	default y
+
+config IRAM_START
+	hex "Internal memory start address (hex)"
+	default "00f00000"
+	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+
+config IRAM_SIZE
+	hex "Internal memory size (hex)"
+	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+	default "00080000" if CHIP_M32700
+	default "00010000" if CHIP_M32102 || CHIP_OPSP
+	default "00008000" if CHIP_VDEC2
+
+#
+# Define implied options from the CPU selection here
+#
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	depends on M32R
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	default n
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config PREEMPT
+	bool "Preemptible Kernel"
+	help
+	  This option reduces the latency of the kernel when reacting to
+	  real-time or interactive events by allowing a low priority process to
+	  be preempted even if it is in kernel mode executing a system call.
+	  This allows applications to run more reliably even when the system is
+	  under load.
+
+	  Say Y here if you are building a kernel for a desktop, embedded
+	  or real-time system.  Say N if you are unsure.
+
+config HAVE_DEC_LOCK
+	bool
+	depends on (SMP || PREEMPT)
+	default n
+
+config SMP
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, like most personal computers, say N. If
+	  you have a system with more than one CPU, say Y.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  singleprocessor machines. On a singleprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  People using multiprocessor machines who say Y here should also say
+	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+	  Management" code will be disabled if you say Y here.
+
+	  See also the <file:Documentation/smp.tex>,
+	  <file:Documentation/smp.txt> and the SMP-HOWTO available at
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config CHIP_M32700_TS1
+	bool "Workaround code for the M32700 TS1 chip's bug"
+	depends on (CHIP_M32700 && SMP)
+	default n
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "2"
+	help
+	  This allows you to specify the maximum number of CPUs which this
+	  kernel will support.  The maximum supported value is 32 and the
+	  minimum value which makes sense is 2.
+
+	  This is purely to save memory - each supported CPU adds
+	  approximately eight kilobytes to the kernel image.
+
+# Common NUMA Features
+config NUMA
+	bool "Numa Memory Allocation Support"
+	depends on SMP
+	default n
+
+# turning this on wastes a bunch of space.
+# Summit needs it only when NUMA is on
+config BOOT_IOREMAP
+	bool
+	depends on NUMA
+	default n
+
+endmenu
+
+
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config PCI
+	bool "PCI support"
+	default n
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+	  VESA. If you have PCI, say Y, otherwise N.
+
+	  The PCI-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+	  information about which PCI hardware does work under Linux and which
+	  doesn't.
+
+choice
+	prompt "PCI access mode"
+	depends on PCI
+	default PCI_GOANY
+
+config PCI_GOBIOS
+	bool "BIOS"
+	---help---
+	  On PCI systems, the BIOS can be used to detect the PCI devices and
+	  determine their configuration. However, some old PCI motherboards
+	  have BIOS bugs and may crash if this is done. Also, some embedded
+	  PCI-based systems don't have any BIOS at all. Linux can also try to
+	  detect the PCI hardware directly without using the BIOS.
+
+	  With this option, you can specify how Linux should detect the PCI
+	  devices. If you choose "BIOS", the BIOS will be used, if you choose
+	  "Direct", the BIOS won't be used, and if you choose "Any", the
+	  kernel will try the direct access method and falls back to the BIOS
+	  if that doesn't work. If unsure, go with the default, which is
+	  "Any".
+
+config PCI_GODIRECT
+	bool "Direct"
+
+config PCI_GOANY
+	bool "Any"
+
+endchoice
+
+config PCI_BIOS
+	bool
+	depends on PCI && (PCI_GOBIOS || PCI_GOANY)
+	default y
+
+config PCI_DIRECT
+	bool
+ 	depends on PCI && (PCI_GODIRECT || PCI_GOANY)
+	default y
+
+source "drivers/pci/Kconfig"
+
+config ISA
+	bool "ISA support"
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  If you have ISA, say Y, otherwise N.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/m32r/oprofile/Kconfig"
+
+source "arch/m32r/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"