Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/serial patches from Greg KH:
 "tty and serial merge for 3.4-rc1

  Here's the big serial and tty merge for the 3.4-rc1 tree.

  There's loads of fixes and reworks in here from Jiri for the tty
  layer, and a number of patches from Alan to help try to wrestle the vt
  layer into a sane model.

  Other than that, lots of driver updates and fixes, and other minor
  stuff, all detailed in the shortlog."

* tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits)
  serial: pxa: add clk_prepare/clk_unprepare calls
  TTY: Wrong unicode value copied in con_set_unimap()
  serial: PL011: clear pending interrupts
  serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.
  vt: NULL dereference in vt_do_kdsk_ioctl()
  tty: serial: vt8500: fix annotations for probe/remove
  serial: remove back and forth conversions in serial_out_sync
  serial: use serial_port_in/out vs serial_in/out in 8250
  serial: introduce generic port in/out helpers
  serial: reduce number of indirections in 8250 code
  serial: delete useless void casts in 8250.c
  serial: make 8250's serial_in shareable to other drivers.
  serial: delete last unused traces of pausing I/O in 8250
  pch_uart: Add module parameter descriptions
  pch_uart: Use existing default_baud in setup_console
  pch_uart: Add user_uartclk parameter
  pch_uart: Add Fish River Island II uart clock quirks
  pch_uart: Use uartclk instead of base_baud
  mpc5200b/uart: select more tolerant uart prescaler on low baudrates
  tty: moxa: fix bit test in moxa_start()
  ...

6 files changed, 185 insertions, 600 deletions

diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c
index bf6d9d8c802..0216e28300f 100644
--- a/arch/ia64/hp/sim/boot/fw-emu.c
+++ b/arch/ia64/hp/sim/boot/fw-emu.c
@@ -160,28 +160,19 @@ sal_emulator (long index, unsigned long in1, unsigned long in2,
 	 */
 	status = 0;
 	if (index == SAL_FREQ_BASE) {
-		switch (in1) {
-		      case SAL_FREQ_BASE_PLATFORM:
+		if (in1 == SAL_FREQ_BASE_PLATFORM)
 			r9 = 200000000;
-			break;
-
-		      case SAL_FREQ_BASE_INTERVAL_TIMER:
+		else if (in1 == SAL_FREQ_BASE_INTERVAL_TIMER) {
 			/*
 			 * Is this supposed to be the cr.itc frequency
 			 * or something platform specific?  The SAL
 			 * doc ain't exactly clear on this...
 			 */
 			r9 = 700000000;
-			break;
-
-		      case SAL_FREQ_BASE_REALTIME_CLOCK:
+		} else if (in1 == SAL_FREQ_BASE_REALTIME_CLOCK)
 			r9 = 1;
-			break;
-
-		      default:
+		else
 			status = -1;
-			break;
-		}
 	} else if (index == SAL_SET_VECTORS) {
 		;
 	} else if (index == SAL_GET_STATE_INFO) {
diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c
index 4bd9a63260e..0aa70ebda49 100644
--- a/arch/ia64/hp/sim/hpsim_irq.c
+++ b/arch/ia64/hp/sim/hpsim_irq.c
@@ -10,6 +10,8 @@
 #include <linux/sched.h>
 #include <linux/irq.h>
 
+#include "hpsim_ssc.h"
+
 static unsigned int
 hpsim_irq_startup(struct irq_data *data)
 {
@@ -37,15 +39,37 @@ static struct irq_chip irq_type_hp_sim = {
 	.irq_set_affinity =	hpsim_set_affinity_noop,
 };
 
+static void hpsim_irq_set_chip(int irq)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+
+	if (chip == &no_irq_chip)
+		irq_set_chip(irq, &irq_type_hp_sim);
+}
+
+static void hpsim_connect_irq(int intr, int irq)
+{
+	ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT);
+}
+
+int hpsim_get_irq(int intr)
+{
+	int irq = assign_irq_vector(AUTO_ASSIGN);
+
+	if (irq >= 0) {
+		hpsim_irq_set_chip(irq);
+		irq_set_handler(irq, handle_simple_irq);
+		hpsim_connect_irq(intr, irq);
+	}
+
+	return irq;
+}
+
 void __init
 hpsim_irq_init (void)
 {
 	int i;
 
-	for_each_active_irq(i) {
-		struct irq_chip *chip = irq_get_chip(i);
-
-		if (chip == &no_irq_chip)
-			irq_set_chip(i, &irq_type_hp_sim);
-	}
+	for_each_active_irq(i)
+		hpsim_irq_set_chip(i);
 }
diff --git a/arch/ia64/hp/sim/hpsim_setup.c b/arch/ia64/hp/sim/hpsim_setup.c
index f629e903ebc..664a5402a69 100644
--- a/arch/ia64/hp/sim/hpsim_setup.c
+++ b/arch/ia64/hp/sim/hpsim_setup.c
@@ -26,12 +26,6 @@
 #include "hpsim_ssc.h"
 
 void
-ia64_ssc_connect_irq (long intr, long irq)
-{
-	ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT);
-}
-
-void
 ia64_ctl_trace (long on)
 {
 	ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE);
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index 47afcc61f6e..e343357f80b 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -129,17 +129,6 @@ netdev_probe(char *name, unsigned char *ether)
 
 
 static inline int
-netdev_connect(int irq)
-{
-	/* XXX Fix me
-	 * this does not support multiple cards
-	 * also no return value
-	 */
-	ia64_ssc_connect_irq(NETWORK_INTR, irq);
-	return 0;
-}
-
-static inline int
 netdev_attach(int fd, int irq, unsigned int ipaddr)
 {
 	/* this puts the host interface in the right mode (start interrupting) */
@@ -226,15 +215,13 @@ simeth_probe1(void)
 		return err;
 	}
 
-	if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
-		panic("%s: out of interrupt vectors!\n", __func__);
-	dev->irq = rc;
-
 	/*
 	 * attach the interrupt in the simulator, this does enable interrupts
 	 * until a netdev_attach() is called
 	 */
-	netdev_connect(dev->irq);
+	if ((rc = hpsim_get_irq(NETWORK_INTR)) < 0)
+		panic("%s: out of interrupt vectors!\n", __func__);
+	dev->irq = rc;
 
 	printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr",
 	       dev->name, simeth_device, local->simfd);
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index bff0824cf8a..c34785dca92 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -4,16 +4,11 @@
  * This driver is mostly used for bringup purposes and will go away.
  * It has a strong dependency on the system console. All outputs
  * are rerouted to the same facility as the one used by printk which, in our
- * case means sys_sim.c console (goes via the simulator). The code hereafter
- * is completely leveraged from the serial.c driver.
+ * case means sys_sim.c console (goes via the simulator).
  *
  * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
  *	Stephane Eranian <eranian@hpl.hp.com>
  *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 02/04/00 D. Mosberger	Merged in serial.c bug fixes in rs_close().
- * 02/25/00 D. Mosberger	Synced up with 2.3.99pre-5 version of serial.c.
- * 07/30/02 D. Mosberger	Replace sti()/cli() with explicit spinlocks & local irq masking
  */
 
 #include <linux/init.h>
@@ -27,15 +22,17 @@
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/capability.h>
+#include <linux/circ_buf.h>
 #include <linux/console.h>
+#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/serial.h>
-#include <linux/serialP.h>
 #include <linux/sysrq.h>
+#include <linux/uaccess.h>
+
+#include <asm/hpsim.h>
 
-#include <asm/irq.h>
-#include <asm/hw_irq.h>
-#include <asm/uaccess.h>
+#include "hpsim_ssc.h"
 
 #undef SIMSERIAL_DEBUG	/* define this to get some debug information */
 
@@ -43,118 +40,44 @@
 
 #define NR_PORTS	1	/* only one port for now */
 
-#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
-
-#define SSC_GETCHAR	21
-
-extern long ia64_ssc (long, long, long, long, int);
-extern void ia64_ssc_connect_irq (long intr, long irq);
-
-static char *serial_name = "SimSerial driver";
-static char *serial_version = "0.6";
-
-/*
- * This has been extracted from asm/serial.h. We need one eventually but
- * I don't know exactly what we're going to put in it so just fake one
- * for now.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-/*
- * Most of the values here are meaningless to this particular driver.
- * However some values must be preserved for the code (leveraged from serial.c
- * to work correctly).
- * port must not be 0
- * type must not be UNKNOWN
- * So I picked arbitrary (guess from where?) values instead
- */
-static struct serial_state rs_table[NR_PORTS]={
-  /* UART CLK   PORT IRQ     FLAGS        */
-  { 0, BASE_BAUD, 0x3F8, 0, STD_COM_FLAGS,0,PORT_16550 }  /* ttyS0 */
+struct serial_state {
+	struct tty_port port;
+	struct circ_buf xmit;
+	int irq;
+	int x_char;
 };
 
-/*
- * Just for the fun of it !
- */
-static struct serial_uart_config uart_config[] = {
-	{ "unknown", 1, 0 },
-	{ "8250", 1, 0 },
-	{ "16450", 1, 0 },
-	{ "16550", 1, 0 },
-	{ "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
-	{ "cirrus", 1, 0 },
-	{ "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
-	{ "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
-		  UART_STARTECH },
-	{ "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
-	{ NULL, 0}
-};
+static struct serial_state rs_table[NR_PORTS];
 
 struct tty_driver *hp_simserial_driver;
 
-static struct async_struct *IRQ_ports[NR_IRQS];
-
 static struct console *console;
 
-static unsigned char *tmp_buf;
-
-extern struct console *console_drivers; /* from kernel/printk.c */
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_stop(struct tty_struct *tty)
-{
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_stop: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
-		tty->stopped, tty->hw_stopped, tty->flow_stopped);
-#endif
-
-}
-
-static void rs_start(struct tty_struct *tty)
-{
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
-		tty->stopped, tty->hw_stopped, tty->flow_stopped);
-#endif
-}
-
-static  void receive_chars(struct tty_struct *tty)
+static void receive_chars(struct tty_struct *tty)
 {
 	unsigned char ch;
 	static unsigned char seen_esc = 0;
 
 	while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
-		if ( ch == 27 && seen_esc == 0 ) {
+		if (ch == 27 && seen_esc == 0) {
 			seen_esc = 1;
 			continue;
-		} else {
-			if ( seen_esc==1 && ch == 'O' ) {
-				seen_esc = 2;
-				continue;
-			} else if ( seen_esc == 2 ) {
-				if ( ch == 'P' ) /* F1 */
-					show_state();
+		} else if (seen_esc == 1 && ch == 'O') {
+			seen_esc = 2;
+			continue;
+		} else if (seen_esc == 2) {
+			if (ch == 'P') /* F1 */
+				show_state();
 #ifdef CONFIG_MAGIC_SYSRQ
-				if ( ch == 'S' ) { /* F4 */
-					do
-						ch = ia64_ssc(0, 0, 0, 0,
-							      SSC_GETCHAR);
-					while (!ch);
-					handle_sysrq(ch);
-				}
-#endif
-				seen_esc = 0;
-				continue;
+			if (ch == 'S') { /* F4 */
+				do {
+					ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR);
+				} while (!ch);
+				handle_sysrq(ch);
 			}
+#endif
+			seen_esc = 0;
+			continue;
 		}
 		seen_esc = 0;
 
@@ -169,22 +92,19 @@ static  void receive_chars(struct tty_struct *tty)
  */
 static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
 {
-	struct async_struct * info;
+	struct serial_state *info = dev_id;
+	struct tty_struct *tty = tty_port_tty_get(&info->port);
 
-	/*
-	 * I don't know exactly why they don't use the dev_id opaque data
-	 * pointer instead of this extra lookup table
-	 */
-	info = IRQ_ports[irq];
-	if (!info || !info->tty) {
-		printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
+	if (!tty) {
+		printk(KERN_INFO "%s: tty=0 problem\n", __func__);
 		return IRQ_NONE;
 	}
 	/*
 	 * pretty simple in our case, because we only get interrupts
 	 * on inbound traffic
 	 */
-	receive_chars(info->tty);
+	receive_chars(tty);
+	tty_kref_put(tty);
 	return IRQ_HANDLED;
 }
 
@@ -194,17 +114,12 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
  * -------------------------------------------------------------------
  */
 
-static void do_softint(struct work_struct *private_)
-{
-	printk(KERN_ERR "simserial: do_softint called\n");
-}
-
 static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
-	if (!tty || !info->xmit.buf)
+	if (!info->xmit.buf)
 		return 0;
 
 	local_irq_save(flags);
@@ -218,12 +133,12 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 	return 1;
 }
 
-static void transmit_chars(struct async_struct *info, int *intr_done)
+static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
+		int *intr_done)
 {
 	int count;
 	unsigned long flags;
 
-
 	local_irq_save(flags);
 
 	if (info->x_char) {
@@ -231,16 +146,16 @@ static void transmit_chars(struct async_struct *info, int *intr_done)
 
 		console->write(console, &c, 1);
 
-		info->state->icount.tx++;
 		info->x_char = 0;
 
 		goto out;
 	}
 
-	if (info->xmit.head == info->xmit.tail || info->tty->stopped || info->tty->hw_stopped) {
+	if (info->xmit.head == info->xmit.tail || tty->stopped ||
+			tty->hw_stopped) {
 #ifdef SIMSERIAL_DEBUG
 		printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
-		       info->xmit.head, info->xmit.tail, info->tty->stopped);
+		       info->xmit.head, info->xmit.tail, tty->stopped);
 #endif
 		goto out;
 	}
@@ -272,24 +187,24 @@ out:
 
 static void rs_flush_chars(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
-	if (info->xmit.head == info->xmit.tail || tty->stopped || tty->hw_stopped ||
-	    !info->xmit.buf)
+	if (info->xmit.head == info->xmit.tail || tty->stopped ||
+			tty->hw_stopped || !info->xmit.buf)
 		return;
 
-	transmit_chars(info, NULL);
+	transmit_chars(tty, info, NULL);
 }
 
-
 static int rs_write(struct tty_struct * tty,
 		    const unsigned char *buf, int count)
 {
+	struct serial_state *info = tty->driver_data;
 	int	c, ret = 0;
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
 	unsigned long flags;
 
-	if (!tty || !info->xmit.buf || !tmp_buf) return 0;
+	if (!info->xmit.buf)
+		return 0;
 
 	local_irq_save(flags);
 	while (1) {
@@ -310,30 +225,30 @@ static int rs_write(struct tty_struct * tty,
 	/*
 	 * Hey, we transmit directly from here in our case
 	 */
-	if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE)
-	    && !tty->stopped && !tty->hw_stopped) {
-		transmit_chars(info, NULL);
-	}
+	if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
+			!tty->stopped && !tty->hw_stopped)
+		transmit_chars(tty, info, NULL);
+
 	return ret;
 }
 
 static int rs_write_room(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 }
 
 static int rs_chars_in_buffer(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 }
 
 static void rs_flush_buffer(struct tty_struct *tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -349,7 +264,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
  */
 static void rs_send_xchar(struct tty_struct *tty, char ch)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	info->x_char = ch;
 	if (ch) {
@@ -357,7 +272,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
 		 * I guess we could call console->write() directly but
 		 * let's do that for now.
 		 */
-		transmit_chars(info, NULL);
+		transmit_chars(tty, info, NULL);
 	}
 }
 
@@ -371,14 +286,15 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
  */
 static void rs_throttle(struct tty_struct * tty)
 {
-	if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty));
+	if (I_IXOFF(tty))
+		rs_send_xchar(tty, STOP_CHAR(tty));
 
 	printk(KERN_INFO "simrs_throttle called\n");
 }
 
 static void rs_unthrottle(struct tty_struct * tty)
 {
-	struct async_struct *info = (struct async_struct *)tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	if (I_IXOFF(tty)) {
 		if (info->x_char)
@@ -389,7 +305,6 @@ static void rs_unthrottle(struct tty_struct * tty)
 	printk(KERN_INFO "simrs_unthrottle called\n");
 }
 
-
 static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 {
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
@@ -400,48 +315,21 @@ static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 	}
 
 	switch (cmd) {
-		case TIOCGSERIAL:
-			printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
-			return 0;
-		case TIOCSSERIAL:
-			printk(KERN_INFO "simrs_ioctl TIOCSSERIAL called\n");
-			return 0;
-		case TIOCSERCONFIG:
-			printk(KERN_INFO "rs_ioctl: TIOCSERCONFIG called\n");
-			return -EINVAL;
-
-		case TIOCSERGETLSR: /* Get line status register */
-			printk(KERN_INFO "rs_ioctl: TIOCSERGETLSR called\n");
-			return  -EINVAL;
-
-		case TIOCSERGSTRUCT:
-			printk(KERN_INFO "rs_ioctl: TIOCSERGSTRUCT called\n");
-#if 0
-			if (copy_to_user((struct async_struct *) arg,
-					 info, sizeof(struct async_struct)))
-				return -EFAULT;
-#endif
-			return 0;
-
-		/*
-		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-		 * - mask passed in arg for lines of interest
-		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-		 * Caller should use TIOCGICOUNT to see which one it was
-		 */
-		case TIOCMIWAIT:
-			printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
-			return 0;
-		case TIOCSERGWILD:
-		case TIOCSERSWILD:
-			/* "setserial -W" is called in Debian boot */
-			printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
-			return 0;
-
-		default:
-			return -ENOIOCTLCMD;
-		}
-	return 0;
+	case TIOCGSERIAL:
+	case TIOCSSERIAL:
+	case TIOCSERGSTRUCT:
+	case TIOCMIWAIT:
+		return 0;
+	case TIOCSERCONFIG:
+	case TIOCSERGETLSR: /* Get line status register */
+		return -EINVAL;
+	case TIOCSERGWILD:
+	case TIOCSERSWILD:
+		/* "setserial -W" is called in Debian boot */
+		printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
+		return 0;
+	}
+	return -ENOIOCTLCMD;
 }
 
 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
@@ -452,220 +340,50 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	if ((old_termios->c_cflag & CRTSCTS) &&
 	    !(tty->termios->c_cflag & CRTSCTS)) {
 		tty->hw_stopped = 0;
-		rs_start(tty);
 	}
 }
 /*
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct async_struct * info)
+static void shutdown(struct tty_port *port)
 {
-	unsigned long	flags;
-	struct serial_state *state;
-	int		retval;
-
-	if (!(info->flags & ASYNC_INITIALIZED)) return;
-
-	state = info->state;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("Shutting down serial port %d (irq %d)....", info->line,
-	       state->irq);
-#endif
+	struct serial_state *info = container_of(port, struct serial_state,
+			port);
+	unsigned long flags;
 
 	local_irq_save(flags);
-	{
-		/*
-		 * First unlink the serial port from the IRQ chain...
-		 */
-		if (info->next_port)
-			info->next_port->prev_port = info->prev_port;
-		if (info->prev_port)
-			info->prev_port->next_port = info->next_port;
-		else
-			IRQ_ports[state->irq] = info->next_port;
-
-		/*
-		 * Free the IRQ, if necessary
-		 */
-		if (state->irq && (!IRQ_ports[state->irq] ||
-				   !IRQ_ports[state->irq]->next_port)) {
-			if (IRQ_ports[state->irq]) {
-				free_irq(state->irq, NULL);
-				retval = request_irq(state->irq, rs_interrupt_single,
-						     IRQ_T(info), "serial", NULL);
-
-				if (retval)
-					printk(KERN_ERR "serial shutdown: request_irq: error %d"
-					       "  Couldn't reacquire IRQ.\n", retval);
-			} else
-				free_irq(state->irq, NULL);
-		}
-
-		if (info->xmit.buf) {
-			free_page((unsigned long) info->xmit.buf);
-			info->xmit.buf = NULL;
-		}
-
-		if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->irq)
+		free_irq(info->irq, info);
 
-		info->flags &= ~ASYNC_INITIALIZED;
+	if (info->xmit.buf) {
+		free_page((unsigned long) info->xmit.buf);
+		info->xmit.buf = NULL;
 	}
 	local_irq_restore(flags);
 }
 
-/*
- * ------------------------------------------------------------
- * rs_close()
- *
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
 static void rs_close(struct tty_struct *tty, struct file * filp)
 {
-	struct async_struct * info = (struct async_struct *)tty->driver_data;
-	struct serial_state *state;
-	unsigned long flags;
-
-	if (!info ) return;
-
-	state = info->state;
-
-	local_irq_save(flags);
-	if (tty_hung_up_p(filp)) {
-#ifdef SIMSERIAL_DEBUG
-		printk("rs_close: hung_up\n");
-#endif
-		local_irq_restore(flags);
-		return;
-	}
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
-#endif
-	if ((tty->count == 1) && (state->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk(KERN_ERR "rs_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
-	}
-	if (--state->count < 0) {
-		printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
-		       info->line, state->count);
-		state->count = 0;
-	}
-	if (state->count) {
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= ASYNC_CLOSING;
-	local_irq_restore(flags);
+	struct serial_state *info = tty->driver_data;
 
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	shutdown(info);
-	rs_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	info->event = 0;
-	info->tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay)
-			schedule_timeout_interruptible(info->close_delay);
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
+	tty_port_close(&info->port, tty, filp);
 }
 
-/*
- * rs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-}
-
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
 static void rs_hangup(struct tty_struct *tty)
 {
-	struct async_struct * info = (struct async_struct *)tty->driver_data;
-	struct serial_state *state = info->state;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_hangup: called\n");
-#endif
-
-	state = info->state;
+	struct serial_state *info = tty->driver_data;
 
 	rs_flush_buffer(tty);
-	if (info->flags & ASYNC_CLOSING)
-		return;
-	shutdown(info);
-
-	info->event = 0;
-	state->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->tty = NULL;
-	wake_up_interruptible(&info->open_wait);
+	tty_port_hangup(&info->port);
 }
 
-
-static int get_async_struct(int line, struct async_struct **ret_info)
+static int activate(struct tty_port *port, struct tty_struct *tty)
 {
-	struct async_struct *info;
-	struct serial_state *sstate;
-
-	sstate = rs_table + line;
-	sstate->count++;
-	if (sstate->info) {
-		*ret_info = sstate->info;
-		return 0;
-	}
-	info = kzalloc(sizeof(struct async_struct), GFP_KERNEL);
-	if (!info) {
-		sstate->count--;
-		return -ENOMEM;
-	}
-	init_waitqueue_head(&info->open_wait);
-	init_waitqueue_head(&info->close_wait);
-	init_waitqueue_head(&info->delta_msr_wait);
-	info->magic = SERIAL_MAGIC;
-	info->port = sstate->port;
-	info->flags = sstate->flags;
-	info->xmit_fifo_size = sstate->xmit_fifo_size;
-	info->line = line;
-	INIT_WORK(&info->work, do_softint);
-	info->state = sstate;
-	if (sstate->info) {
-		kfree(info);
-		*ret_info = sstate->info;
-		return 0;
-	}
-	*ret_info = sstate->info = info;
-	return 0;
-}
-
-static int
-startup(struct async_struct *info)
-{
-	unsigned long flags;
-	int	retval=0;
-	irq_handler_t handler;
-	struct serial_state *state= info->state;
-	unsigned long page;
+	struct serial_state *state = container_of(port, struct serial_state,
+			port);
+	unsigned long flags, page;
+	int retval = 0;
 
 	page = get_zeroed_page(GFP_KERNEL);
 	if (!page)
@@ -673,86 +391,31 @@ startup(struct async_struct *info)
 
 	local_irq_save(flags);
 
-	if (info->flags & ASYNC_INITIALIZED) {
-		free_page(page);
-		goto errout;
-	}
-
-	if (!state->port || !state->type) {
-		if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
-		free_page(page);
-		goto errout;
-	}
-	if (info->xmit.buf)
+	if (state->xmit.buf)
 		free_page(page);
 	else
-		info->xmit.buf = (unsigned char *) page;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("startup: ttys%d (irq %d)...", info->line, state->irq);
-#endif
+		state->xmit.buf = (unsigned char *) page;
 
-	/*
-	 * Allocate the IRQ if necessary
-	 */
-	if (state->irq && (!IRQ_ports[state->irq] ||
-			  !IRQ_ports[state->irq]->next_port)) {
-		if (IRQ_ports[state->irq]) {
-			retval = -EBUSY;
-			goto errout;
-		} else
-			handler = rs_interrupt_single;
-
-		retval = request_irq(state->irq, handler, IRQ_T(info), "simserial", NULL);
-		if (retval) {
-			if (capable(CAP_SYS_ADMIN)) {
-				if (info->tty)
-					set_bit(TTY_IO_ERROR,
-						&info->tty->flags);
-				retval = 0;
-			}
+	if (state->irq) {
+		retval = request_irq(state->irq, rs_interrupt_single, 0,
+				"simserial", state);
+		if (retval)
 			goto errout;
-		}
 	}
 
-	/*
-	 * Insert serial port into IRQ chain.
-	 */
-	info->prev_port = NULL;
-	info->next_port = IRQ_ports[state->irq];
-	if (info->next_port)
-		info->next_port->prev_port = info;
-	IRQ_ports[state->irq] = info;
-
-	if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags);
-
-	info->xmit.head = info->xmit.tail = 0;
-
-#if 0
-	/*
-	 * Set up serial timers...
-	 */
-	timer_table[RS_TIMER].expires = jiffies + 2*HZ/100;
-	timer_active |= 1 << RS_TIMER;
-#endif
+	state->xmit.head = state->xmit.tail = 0;
 
 	/*
 	 * Set up the tty->alt_speed kludge
 	 */
-	if (info->tty) {
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->tty->alt_speed = 57600;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->tty->alt_speed = 115200;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->tty->alt_speed = 230400;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->tty->alt_speed = 460800;
-	}
-
-	info->flags |= ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-	return 0;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
 
 errout:
 	local_irq_restore(flags);
@@ -768,56 +431,11 @@ errout:
  */
 static int rs_open(struct tty_struct *tty, struct file * filp)
 {
-	struct async_struct	*info;
-	int			retval, line;
-	unsigned long		page;
+	struct serial_state *info = rs_table + tty->index;
+	struct tty_port *port = &info->port;
 
-	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS))
-		return -ENODEV;
-	retval = get_async_struct(line, &info);
-	if (retval)
-		return retval;
 	tty->driver_data = info;
-	info->tty = tty;
-
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
-#endif
-	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-	if (!tmp_buf) {
-		page = get_zeroed_page(GFP_KERNEL);
-		if (!page)
-			return -ENOMEM;
-		if (tmp_buf)
-			free_page(page);
-		else
-			tmp_buf = (unsigned char *) page;
-	}
-
-	/*
-	 * If the port is the middle of closing, bail out now
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		return ((info->flags & ASYNC_HUP_NOTIFY) ?
-			-EAGAIN : -ERESTARTSYS);
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval) {
-		return retval;
-	}
+	tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	/*
 	 * figure out which console to use (should be one already)
@@ -828,30 +446,21 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 		console = console->next;
 	}
 
-#ifdef SIMSERIAL_DEBUG
-	printk("rs_open ttys%d successful\n", info->line);
-#endif
-	return 0;
+	return tty_port_open(port, tty, filp);
 }
 
 /*
  * /proc fs routines....
  */
 
-static inline void line_info(struct seq_file *m, struct serial_state *state)
-{
-	seq_printf(m, "%d: uart:%s port:%lX irq:%d\n",
-		       state->line, uart_config[state->type].name,
-		       state->port, state->irq);
-}
-
 static int rs_proc_show(struct seq_file *m, void *v)
 {
 	int i;
 
-	seq_printf(m, "simserinfo:1.0 driver:%s\n", serial_version);
+	seq_printf(m, "simserinfo:1.0\n");
 	for (i = 0; i < NR_PORTS; i++)
-		line_info(m, &rs_table[i]);
+		seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n",
+		       i, rs_table[i].irq);
 	return 0;
 }
 
@@ -868,25 +477,6 @@ static const struct file_operations rs_proc_fops = {
 	.release	= single_release,
 };
 
-/*
- * ---------------------------------------------------------------------
- * rs_init() and friends
- *
- * rs_init() is called at boot-time to initialize the serial driver.
- * ---------------------------------------------------------------------
- */
-
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static inline void show_serial_version(void)
-{
-	printk(KERN_INFO "%s version %s with", serial_name, serial_version);
-	printk(KERN_INFO " no serial options enabled\n");
-}
-
 static const struct tty_operations hp_ops = {
 	.open = rs_open,
 	.close = rs_close,
@@ -901,34 +491,31 @@ static const struct tty_operations hp_ops = {
 	.unthrottle = rs_unthrottle,
 	.send_xchar = rs_send_xchar,
 	.set_termios = rs_set_termios,
-	.stop = rs_stop,
-	.start = rs_start,
 	.hangup = rs_hangup,
-	.wait_until_sent = rs_wait_until_sent,
 	.proc_fops = &rs_proc_fops,
 };
 
-/*
- * The serial driver boot-time initialization code!
- */
-static int __init
-simrs_init (void)
+static const struct tty_port_operations hp_port_ops = {
+	.activate = activate,
+	.shutdown = shutdown,
+};
+
+static int __init simrs_init(void)
 {
-	int			i, rc;
-	struct serial_state	*state;
+	struct serial_state *state;
+	int retval;
 
 	if (!ia64_platform_is("hpsim"))
 		return -ENODEV;
 
-	hp_simserial_driver = alloc_tty_driver(1);
+	hp_simserial_driver = alloc_tty_driver(NR_PORTS);
 	if (!hp_simserial_driver)
 		return -ENOMEM;
 
-	show_serial_version();
+	printk(KERN_INFO "SimSerial driver with no serial options enabled\n");
 
 	/* Initialize the tty_driver structure */
 
-	hp_simserial_driver->owner = THIS_MODULE;
 	hp_simserial_driver->driver_name = "simserial";
 	hp_simserial_driver->name = "ttyS";
 	hp_simserial_driver->major = TTY_MAJOR;
@@ -941,31 +528,33 @@ simrs_init (void)
 	hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(hp_simserial_driver, &hp_ops);
 
-	/*
-	 * Let's have a little bit of fun !
-	 */
-	for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
+	state = rs_table;
+	tty_port_init(&state->port);
+	state->port.ops = &hp_port_ops;
+	state->port.close_delay = 0; /* XXX really 0? */
 
-		if (state->type == PORT_UNKNOWN) continue;
+	retval = hpsim_get_irq(KEYBOARD_INTR);
+	if (retval < 0) {
+		printk(KERN_ERR "%s: out of interrupt vectors!\n",
+				__func__);
+		goto err_free_tty;
+	}
 
-		if (!state->irq) {
-			if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
-				panic("%s: out of interrupt vectors!\n",
-				      __func__);
-			state->irq = rc;
-			ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
-		}
+	state->irq = retval;
 
-		printk(KERN_INFO "ttyS%d at 0x%04lx (irq = %d) is a %s\n",
-		       state->line,
-		       state->port, state->irq,
-		       uart_config[state->type].name);
-	}
+	/* the port is imaginary */
+	printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
 
-	if (tty_register_driver(hp_simserial_driver))
-		panic("Couldn't register simserial driver\n");
+	retval = tty_register_driver(hp_simserial_driver);
+	if (retval) {
+		printk(KERN_ERR "Couldn't register simserial driver\n");
+		goto err_free_tty;
+	}
 
 	return 0;
+err_free_tty:
+	put_tty_driver(hp_simserial_driver);
+	return retval;
 }
 
 #ifndef MODULE
diff --git a/arch/ia64/include/asm/hpsim.h b/arch/ia64/include/asm/hpsim.h
index 892ab198a9d..0fe50225daa 100644
--- a/arch/ia64/include/asm/hpsim.h
+++ b/arch/ia64/include/asm/hpsim.h
@@ -10,7 +10,7 @@ int simcons_register(void);
 struct tty_driver;
 extern struct tty_driver *hp_simserial_driver;
 
-void ia64_ssc_connect_irq(long intr, long irq);
+extern int hpsim_get_irq(int intr);
 void ia64_ctl_trace(long on);
 
 #endif