Merge ../linus

Conflicts:

	drivers/cpufreq/cpufreq.c

104 files changed, 4608 insertions, 2219 deletions

diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 8ff1c6fb5aa..0d67a0a1151 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -49,6 +49,11 @@ config GENERIC_IOMAP
 	bool
 	default y
 
+config GENERIC_BUG
+	bool
+	default y
+	depends on BUG
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -182,6 +187,18 @@ config X86_ES7000
 
 endchoice
 
+config PARAVIRT
+	bool "Paravirtualization support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on !(X86_VISWS || X86_VOYAGER)
+	help
+	  Paravirtualization is a way of running multiple instances of
+	  Linux on the same machine, under a hypervisor.  This option
+	  changes the kernel so it can modify itself when it is run
+	  under a hypervisor, improving performance significantly.
+	  However, when run without a hypervisor the kernel is
+	  theoretically slower.  If in doubt, say N.
+
 config ACPI_SRAT
 	bool
 	default y
@@ -443,7 +460,8 @@ source "drivers/firmware/Kconfig"
 
 choice
 	prompt "High Memory Support"
-	default NOHIGHMEM
+	default HIGHMEM4G if !X86_NUMAQ
+	default HIGHMEM64G if X86_NUMAQ
 
 config NOHIGHMEM
 	bool "off"
@@ -710,20 +728,6 @@ config BOOT_IOREMAP
 	depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
 	default y
 
-config REGPARM
-	bool "Use register arguments"
-	default y
-	help
-	Compile the kernel with -mregparm=3. This instructs gcc to use
-	a more efficient function call ABI which passes the first three
-	arguments of a function call via registers, which results in denser
-	and faster code.
-
-	If this option is disabled, then the default ABI of passing
-	arguments via the stack is used.
-
-	If unsure, say Y.
-
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
@@ -773,23 +777,39 @@ config CRASH_DUMP
           PHYSICAL_START.
 	  For more details see Documentation/kdump/kdump.txt
 
-config PHYSICAL_START
-	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
+config RELOCATABLE
+	bool "Build a relocatable kernel(EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  This build a kernel image that retains relocation information
+          so it can be loaded someplace besides the default 1MB.
+	  The relocations tend to the kernel binary about 10% larger,
+          but are discarded at runtime.
+
+	  One use is for the kexec on panic case where the recovery kernel
+          must live at a different physical address than the primary
+          kernel.
 
-	default "0x1000000" if CRASH_DUMP
+config PHYSICAL_ALIGN
+	hex "Alignment value to which kernel should be aligned"
 	default "0x100000"
+	range 0x2000 0x400000
 	help
-	  This gives the physical address where the kernel is loaded. Normally
-	  for regular kernels this value is 0x100000 (1MB). But in the case
-	  of kexec on panic the fail safe kernel needs to run at a different
-	  address than the panic-ed kernel. This option is used to set the load
-	  address for kernels used to capture crash dump on being kexec'ed
-	  after panic. The default value for crash dump kernels is
-	  0x1000000 (16MB). This can also be set based on the "X" value as
-	  specified in the "crashkernel=YM@XM" command line boot parameter
-	  passed to the panic-ed kernel. Typically this parameter is set as
-	  crashkernel=64M@16M. Please take a look at
-	  Documentation/kdump/kdump.txt for more details about crash dumps.
+	  This value puts the alignment restrictions on physical address
+ 	  where kernel is loaded and run from. Kernel is compiled for an
+ 	  address which meets above alignment restriction.
+
+ 	  If bootloader loads the kernel at a non-aligned address and
+ 	  CONFIG_RELOCATABLE is set, kernel will move itself to nearest
+ 	  address aligned to above value and run from there.
+
+ 	  If bootloader loads the kernel at a non-aligned address and
+ 	  CONFIG_RELOCATABLE is not set, kernel will ignore the run time
+ 	  load address and decompress itself to the address it has been
+ 	  compiled for and run from there. The address for which kernel is
+ 	  compiled already meets above alignment restrictions. Hence the
+ 	  end result is that kernel runs from a physical address meeting
+	  above alignment restrictions.
 
 	  Don't change this unless you know what you are doing.
 
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
index fc4f2abccf0..2aecfba4ac4 100644
--- a/arch/i386/Kconfig.cpu
+++ b/arch/i386/Kconfig.cpu
@@ -103,8 +103,15 @@ config MPENTIUMM
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 
+config MCORE2
+	bool "Core 2/newer Xeon"
+	help
+	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
+	  CPUs. You can distingush newer from older Xeons by the CPU family
+	  in /proc/cpuinfo. Newer ones have 6.
+
 config MPENTIUM4
-	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
 	help
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
@@ -229,7 +236,7 @@ config X86_L1_CACHE_SHIFT
 	default "7" if MPENTIUM4 || X86_GENERIC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-	default "6" if MK7 || MK8 || MPENTIUMM
+	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
@@ -241,6 +248,14 @@ config RWSEM_XCHGADD_ALGORITHM
 	depends on !M386
 	default y
 
+config ARCH_HAS_ILOG2_U32
+	bool
+	default n
+
+config ARCH_HAS_ILOG2_U64
+	bool
+	default n
+
 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
@@ -287,17 +302,17 @@ config X86_ALIGNMENT_16
 
 config X86_GOOD_APIC
 	bool
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2
 	default y
 
 config X86_INTEL_USERCOPY
 	bool
-	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
 	default y
 
 config X86_USE_PPRO_CHECKSUM
 	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
 	default y
 
 config X86_USE_3DNOW
@@ -312,5 +327,5 @@ config X86_OOSTORE
 
 config X86_TSC
 	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1 || MGEODE_LX) && !X86_NUMAQ
+	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
 	default y
diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug
index b31c0802e1c..f68cc6f215f 100644
--- a/arch/i386/Kconfig.debug
+++ b/arch/i386/Kconfig.debug
@@ -85,4 +85,14 @@ config DOUBLEFAULT
           option saves about 4k and might cause you much additional grey
           hair.
 
+config DEBUG_PARAVIRT
+	bool "Enable some paravirtualization debugging"
+	default y
+	depends on PARAVIRT && DEBUG_KERNEL
+	help
+	  Currently deliberately clobbers regs which are allowed to be
+	  clobbered in inlined paravirt hooks, even in native mode.
+	  If turning this off solves a problem, then DISABLE_INTERRUPTS() or
+	  ENABLE_INTERRUPTS() is lying about what registers can be clobbered.
+
 endmenu
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 7cc0b189b82..f7ac1aea1d8 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -26,10 +26,12 @@ endif
 
 LDFLAGS		:= -m elf_i386
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
-LDFLAGS_vmlinux :=
+ifdef CONFIG_RELOCATABLE
+LDFLAGS_vmlinux := --emit-relocs
+endif
 CHECKFLAGS	+= -D__i386__
 
-CFLAGS += -pipe -msoft-float
+CFLAGS += -pipe -msoft-float -mregparm=3
 
 # prevent gcc from keeping the stack 16 byte aligned
 CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
@@ -37,11 +39,13 @@ CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
 # CPU-specific tuning. Anything which can be shared with UML should go here.
 include $(srctree)/arch/i386/Makefile.cpu
 
-cflags-$(CONFIG_REGPARM) += -mregparm=3
-
 # temporary until string.h is fixed
 cflags-y += -ffreestanding
 
+# this works around some issues with generating unwind tables in older gccs
+# newer gccs do it by default
+cflags-y