i386: move boot

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

33 files changed, 6 insertions, 4377 deletions

diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 510df782f94..776d8dcf234 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -116,7 +116,7 @@ drivers-$(CONFIG_FB)                    += arch/i386/video/
 CFLAGS += $(mflags-y)
 AFLAGS += $(mflags-y)
 
-boot := arch/i386/boot
+boot := arch/x86/boot
 
 PHONY += zImage bzImage compressed zlilo bzlilo \
          zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
@@ -125,9 +125,11 @@ all: bzImage
 
 # KBUILD_IMAGE specify target image being built
                     KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := arch/i386/boot/zImage
+zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
 
 zImage bzImage: vmlinux
+	$(Q)mkdir -p $(objtree)/arch/i386/boot
+	$(Q)ln -fsn $(objtree)/arch/x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage
 	$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
 
 compressed: zImage
@@ -145,7 +147,8 @@ install:
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
 
 archclean:
-	$(Q)$(MAKE) $(clean)=arch/i386/boot
+	$(Q)rm -rf $(objtree)/arch/i386/boot
+	$(Q)$(MAKE) $(clean)=arch/x86/boot
 
 define archhelp
   echo  '* bzImage	- Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
diff --git a/arch/i386/boot/.gitignore b/arch/i386/boot/.gitignore
deleted file mode 100644
index 18465143cfa..00000000000
--- a/arch/i386/boot/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-bootsect
-bzImage
-setup
-setup.bin
-setup.elf
diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile
deleted file mode 100644
index 93386a4e40b..00000000000
--- a/arch/i386/boot/Makefile
+++ /dev/null
@@ -1,171 +0,0 @@
-#
-# arch/i386/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-# ROOT_DEV specifies the default root-device when making the image.
-# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-# the default of FLOPPY is used by 'build'.
-
-ROOT_DEV := CURRENT
-
-# If you want to preset the SVGA mode, uncomment the next line and
-# set SVGA_MODE to whatever number you want.
-# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
-# The number is the same as you would ordinarily press at bootup.
-
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
-
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets		:= vmlinux.bin setup.bin setup.elf zImage bzImage
-subdir- 	:= compressed
-
-setup-y		+= a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o
-setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y		+= printf.o string.o tty.o video.o version.o voyager.o
-
-# The link order of the video-*.o modules can matter.  In particular,
-# video-vga.o *must* be listed first, followed by video-vesa.o.
-# Hardware-specific drivers should follow in the order they should be
-# probed, and video-bios.o should typically be last.
-setup-y		+= video-vga.o
-setup-y		+= video-vesa.o
-setup-y		+= video-bios.o
-targets		+= $(setup-y)
-hostprogs-y	:= tools/build
-
-HOSTCFLAGS_build.o := $(LINUXINCLUDE)
-
-# ---------------------------------------------------------------------------
-
-# How to compile the 16-bit code.  Note we always compile for -march=i386,
-# that way we can complain to the user if the CPU is insufficient.
-cflags-i386   := 
-cflags-x86_64 := -m32
-CFLAGS		:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
-		   $(cflags-$(ARCH)) \
-		   -Wall -Wstrict-prototypes \
-		   -march=i386 -mregparm=3 \
-		   -include $(srctree)/$(src)/code16gcc.h \
-		   -fno-strict-aliasing -fomit-frame-pointer \
-		   $(call cc-option, -ffreestanding) \
-		   $(call cc-option, -fno-toplevel-reorder,\
-			$(call cc-option, -fno-unit-at-a-time)) \
-		   $(call cc-option, -fno-stack-protector) \
-		   $(call cc-option, -mpreferred-stack-boundary=2)
-AFLAGS		:= $(CFLAGS) -D__ASSEMBLY__
-
-$(obj)/zImage:  IMAGE_OFFSET := 0x1000
-$(obj)/zImage:  EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
-$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__
-$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS   := -b
-
-quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
-	    $(obj)/vmlinux.bin $(ROOT_DEV) > $@
-
-$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
-			      $(obj)/vmlinux.bin $(obj)/tools/build FORCE
-	$(call if_changed,image)
-	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-
-$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-
-SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
-
-LDFLAGS_setup.elf	:= -T
-$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
-	$(call if_changed,ld)
-
-OBJCOPYFLAGS_setup.bin	:= -O binary
-
-$(obj)/setup.bin: $(obj)/setup.elf FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
-
-# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
-FDARGS = 
-# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
-FDINITRD =
-
-image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
-
-$(obj)/mtools.conf: $(src)/mtools.conf.in
-	sed -e 's|@OBJ@|$(obj)|g' < $< > $@
-
-# This requires write access to /dev/fd0
-zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
-	MTOOLSRC=$(obj)/mtools.conf mformat a:			; sync
-	syslinux /dev/fd0					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux	; sync
-
-# These require being root or having syslinux 2.02 or higher installed
-fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
-	MTOOLSRC=$(obj)/mtools.conf mformat v:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux	; sync
-
-fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
-	MTOOLSRC=$(obj)/mtools.conf mformat w:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux	; sync
-
-isoimage: $(BOOTIMAGE)
-	-rm -rf $(obj)/isoimage
-	mkdir $(obj)/isoimage
-	for i in lib lib64 share end ; do \
-		if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
-			cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
-			break ; \
-		fi ; \
-		if [ $$i = end ] ; then exit 1 ; fi ; \
-	done
-	cp $(BOOTIMAGE) $(obj)/isoimage/linux
-	echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
-	fi
-	mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-		-no-emul-boot -boot-load-size 4 -boot-info-table \
-		$(obj)/isoimage
-	rm -rf $(obj)/isoimage
-
-zlilo: $(BOOTIMAGE)
-	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
-	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
-	cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
-	cp System.map $(INSTALL_PATH)/
-	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
-
-install:
-	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/i386/boot/a20.c b/arch/i386/boot/a20.c
deleted file mode 100644
index 31348d054fc..00000000000
--- a/arch/i386/boot/a20.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * arch/i386/boot/a20.c
- *
- * Enable A20 gate (return -1 on failure)
- */
-
-#include "boot.h"
-
-#define MAX_8042_LOOPS	100000
-
-static int empty_8042(void)
-{
-	u8 status;
-	int loops = MAX_8042_LOOPS;
-
-	while (loops--) {
-		io_delay();
-
-		status = inb(0x64);
-		if (status & 1) {
-			/* Read and discard input data */
-			io_delay();
-			(void)inb(0x60);
-		} else if (!(status & 2)) {
-			/* Buffers empty, finished! */
-			return 0;
-		}
-	}
-
-	return -1;
-}
-
-/* Returns nonzero if the A20 line is enabled.  The memory address
-   used as a test is the int $0x80 vector, which should be safe. */
-
-#define A20_TEST_ADDR	(4*0x80)
-#define A20_TEST_SHORT  32
-#define A20_TEST_LONG	2097152	/* 2^21 */
-
-static int a20_test(int loops)
-{
-	int ok = 0;
-	int saved, ctr;
-
-	set_fs(0x0000);
-	set_gs(0xffff);
-
-	saved = ctr = rdfs32(A20_TEST_ADDR);
-
-	while (loops--) {
-		wrfs32(++ctr, A20_TEST_ADDR);
-		io_delay();	/* Serialize and make delay constant */
-		ok = rdgs32(A20_TEST_ADDR+0x10) ^ ctr;
-		if (ok)
-			break;
-	}
-
-	wrfs32(saved, A20_TEST_ADDR);
-	return ok;
-}
-
-/* Quick test to see if A20 is already enabled */
-static int a20_test_short(void)
-{
-	return a20_test(A20_TEST_SHORT);
-}
-
-/* Longer test that actually waits for A20 to come on line; this
-   is useful when dealing with the KBC or other slow external circuitry. */
-static int a20_test_long(void)
-{
-	return a20_test(A20_TEST_LONG);
-}
-
-static void enable_a20_bios(void)
-{
-	asm volatile("pushfl; int $0x15; popfl"
-		     : : "a" ((u16)0x2401));
-}
-
-static void enable_a20_kbc(void)
-{
-	empty_8042();
-
-	outb(0xd1, 0x64);	/* Command write */
-	empty_8042();
-
-	outb(0xdf, 0x60);	/* A20 on */
-	empty_8042();
-}
-
-static void enable_a20_fast(void)
-{
-	u8 port_a;
-
-	port_a = inb(0x92);	/* Configuration port A */
-	port_a |=  0x02;	/* Enable A20 */
-	port_a &= ~0x01;	/* Do not reset machine */
-	outb(port_a, 0x92);
-}
-
-/*
- * Actual routine to enable A20; return 0 on ok, -1 on failure
- */
-
-#define A20_ENABLE_LOOPS 255	/* Number of times to try */
-
-int enable_a20(void)
-{
-	int loops = A20_ENABLE_LOOPS;
-
-#if defined(CONFIG_X86_ELAN)
-	/* Elan croaks if we try to touch the KBC */
-	enable_a20_fast();
-	while (!a20_test_long())
-		;
-	return 0;
-#elif defined(CONFIG_X86_VOYAGER)
-	/* On Voyager, a20_test() is unsafe? */
-	enable_a20_kbc();
-	return 0;
-#else
-	while (loops--) {
-		/* First, check to see if A20 is already enabled
-		   (legacy free, etc.) */
-		if (a20_test_short())
-			return 0;
-
-		/* Next, try the BIOS (INT 0x15, AX=0x2401) */
-		enable_a20_bios();
-		if (a20_test_short())
-			return 0;
-
-		/* Try enabling A20 through the keyboard controller */
-		empty_8042();
-		if (a20_test_short())
-			return 0; /* BIOS worked, but with delayed reaction */
-
-		enable_a20_kbc();
-		if (a20_test_long())
-			return 0;
-
-		/* Finally, try enabling the "fast A20 gate" */
-		enable_a20_fast();
-		if (a20_test_long())
-			return 0;
-	}
-
-	return -1;
-#endif
-}
diff --git a/arch/i386/boot/apm.c b/arch/i386/boot/apm.c
deleted file mode 100644
index eab50c55a3a..00000000000
--- a/arch/i386/boot/apm.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   Original APM BIOS checking by Stephen Rothwell, May 1994
- *   (sfr@canb.auug.org.au)
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * arch/i386/boot/apm.c
- *
- * Get APM BIOS information
- */
-
-#include "boot.h"
-
-#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
-
-int query_apm_bios(void)
-{
-	u16 ax, bx, cx, dx, di;
-	u32 ebx, esi;
-	u8 err;
-
-	/* APM BIOS installation check */
-	ax = 0x5300;
-	bx = cx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
-		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
-		     : : "esi", "edi");
-
-	if (err)
-		return -1;		/* No APM BIOS */
-
-	if (bx != 0x504d)	/* "PM" signature */
-		return -1;
-
-	if (!(cx & 0x02))		/* 32 bits supported? */
-		return -1;
-
-	/* Disconnect first, just in case */
-	ax = 0x5304;
-	bx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
-		     : "+a" (ax), "+b" (bx)
-		     : : "ecx", "edx", "esi", "edi");
-
-	/* Paranoia */
-	ebx = esi = 0;
-	cx = dx = di = 0;
-
-	/* 32-bit connect */
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %6"
-		     : "=a" (ax), "+b" (ebx), "+c" (cx), "+d" (dx),
-		       "+S" (esi), "+D" (di), "=m" (err)
-		     : "a" (0x5303));
-
-	boot_params.apm_bios_info.cseg = ax;
-	boot_params.apm_bios_info.offset = ebx;
-	boot_params.apm_bios_info.cseg_16 = cx;
-	boot_params.apm_bios_info.dseg = dx;
-	boot_params.apm_bios_info.cseg_len = (u16)esi;
-	boot_params.apm_bios_info.cseg_16_len = esi >> 16;
-	boot_params.apm_bios_info.dseg_len = di;
-
-	if (err)
-		return -1;
-
-	/* Redo the installation check as the 32-bit connect;
-	   some BIOSes return different flags this way... */
-
-	ax = 0x5300;
-	bx = cx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
-		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
-		     : : "esi", "edi");
-
-	if (err || bx != 0x504d) {
-		/* Failure with 32-bit connect, try to disconect and ignore */
-		ax = 0x5304;
-		bx = 0;
-		asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
-			     : "+a" (ax), "+b" (bx)
-			     : : "ecx", "edx", "esi", "edi");
-		return -1;
-	}
-
-	boot_params.apm_bios_info.version = ax;
-	boot_params.apm_bios_info.flags = cx;
-	return 0;
-}
-
-#endif
diff --git a/arch/i386/boot/bitops.h b/arch/i386/boot/bitops.h
deleted file mode 100644
index 8dcc8dc7db8..00000000000
--- a/arch/i386/boot/bitops.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * arch/i386/boot/bitops.h
- *
- * Very simple bitops for the boot code.
- */
-
-#ifndef BOOT_BITOPS_H
-#define BOOT_BITOPS_H
-#define _LINUX_BITOPS_H		/* Inhibit inclusion of <linux/bitops.h> */
-
-static inline int constant_test_bit(int nr, const void *addr)
-{
-	const u32 *p = (const u32 *)addr;
-	return ((1UL << (nr & 31)) & (p[nr >> 5])) != 0;
-}
-static inline int variable_test_bit(int nr, const void *addr)
-{
-	u8 v;
-	const u32 *p = (const u32 *)addr;
-
-	asm("btl %2,%1; setc %0" : "=qm" (v) : "m" (*p), "Ir" (nr));
-	return v;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- constant_test_bit((nr),(addr)) : \
- variable_test_bit((nr),(addr)))
-
-static inline void set_bit(int nr, void *addr)
-{
-	asm("btsl %1,%0" : "+m" (*(u32 *)addr) : "Ir" (nr));
-}
-
-#endif /* BOOT_BITOPS_H */
diff --git a/arch/i386/boot/boot.h b/arch/i386/boot/boot.h
deleted file mode 100644
index 20bab9431ac..00000000000
--- a/arch/i386/boot/boot.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * arch/i386/boot/boot.h
- *
- * Header file for the real-mode kernel code
- */
-
-#ifndef BOOT_BOOT_H
-#define BOOT_BOOT_H
-
-#ifndef __ASSEMBLY__
-
-#include <stdarg.h>
-#include <linux/types.h>
-#include <linux/edd.h>
-#include <asm/boot.h>
-#include <asm/bootparam.h>
-
-/* Useful macros */
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
-
-extern struct setup_header hdr;
-extern struct boot_params boot_params;
-
-/* Basic port I/O */
-static inline void outb(u8 v, u16 port)
-{
-	asm volatile("outb %0,%1" : : "a" (v), "dN" (port));
-}
-static inline u8 inb(u16 port)
-{
-	u8 v;
-	asm volatile("inb %1,%0" : "=a" (v) : "dN" (port));
-	return v;
-}
-
-static inline void outw(u16 v, u16 port)
-{
-	asm volatile("outw %0,%1" : : "a" (v), "dN" (port));
-}
-static inline u16 inw(u16 port)
-{
-	u16 v;
-	asm volatile("inw %1,%0" : "=a" (v) : "dN" (port));
-	return v;
-}
-
-static inline void outl(u32 v, u16 port)
-{
-	asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
-}
-static inline u32 inl(u32 port)
-{
-	u32 v;
-	asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
-	return v;
-}
-
-static inline void io_delay(void)
-{
-	const u16 DELAY_PORT = 0x80;
-	asm volatile("outb %%al,%0" : : "dN" (DELAY_PORT));
-}
-
-/* These functions are used to reference data in other segments. */
-
-static inline u16 ds(void)
-{
-	u16 seg;
-	asm("movw %%ds,%0" : "=rm" (seg));
-	return seg;
-}
-
-static inline void set_fs(u16 seg)
-{
-	asm volatile("movw %0,%%fs" : : "rm" (seg));
-}
-static inline u16 fs(void)
-{
-	u16 seg;
-	asm volatile("movw %%fs,%0" : "=rm" (seg));
-	return seg;
-}
-
-static inline void set_gs(u16 seg)
-{
-	asm volatile("movw %0,%%gs" : : "rm" (seg));
-}
-static inline u16 gs(void)
-{
-	u16 seg;
-	asm volatile("movw %%gs,%0" : "=rm" (seg));
-	return seg;
-}
-
-typedef unsigned int addr_t;
-
-static inline u8 rdfs8(addr_t addr)
-{
-	u8 v;
-	asm volatile("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
-	return v;
-}
-static inline u16 rdfs16(addr_t addr)
-{
-	u16 v;
-	asm volatile("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
-	return v;
-}
-static inline u32 rdfs32(addr_t addr)
-{
-	u32 v;
-	asm volatile("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
-	return v;
-}
-
-static inline void wrfs8(u8 v, addr_t addr)
-{
-	asm volatile("movb %1,%%fs:%0" : "+m" (*(u8 *)addr) : "r" (v));
-}
-static inline void wrfs16(u16 v, addr_t addr)
-{
-	asm volatile("movw %1,%%fs:%0" : "+m" (*(u16 *)addr) : "r" (v));
-}
-static inline void wrfs32(u32 v, addr_t addr)
-{
-	asm volatile("movl %1,%%fs:%0" : "+m" (*(u32 *)addr) : "r" (v));
-}
-
-static inline u8 rdgs8(addr_t addr)
-{
-	u8 v;
-	asm volatile("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
-	return v;
-}
-static inline u16 rdgs16(addr_t addr)
-{
-	u16 v;
-	asm volatile("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
-	return v;
-}
-static inline u32 rdgs32(addr_t addr)
-{
-	u32 v;
-	asm volatile("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
-	return v;
-}
-
-static inline void wrgs8(u8 v, addr_t addr)
-{
-	asm volatile("movb %1,%%gs:%0" : "+m" (*(u8 *)addr) : "r" (v));
-}
-static inline void wrgs16(u16 v, addr_t addr)
-{
-	asm volatile("movw %1,%%gs:%0" : "+m" (*(u16 *)addr) : "r" (v));
-}
-static inline void wrgs32(u32 v, addr_t addr)
-{
-	asm volatile("movl %1,%%gs:%0" : "+m" (*(u32 *)addr) : "r" (v));
-}
-
-/* Note: these only return true/false, not a signed return value! */
-static inline int memcmp(const void *s1, const void *s2, size_t len)
-{
-	u8 diff;
-	asm("repe; cmpsb; setnz %0"
-	    : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
-	return diff;
-}
-
-static inline int memcmp_fs(const void *s1, addr_t s2, size_t len)
-{
-	u8 diff;
-	asm volatile("fs; repe; cmpsb; setnz %0"
-		     : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
-	return diff;
-}
-static inline int memcmp_gs(const void *s1, addr_t s2, size_t len)
-{
-	u8 diff;
-	asm volatile("gs; repe; cmpsb; setnz %0"
-		     : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
-	return diff;
-}
-
-static inline int isdigit(int ch)
-{
-	return (ch >= '0') && (ch <= '9');
-}
-
-/* Heap -- available for dynamic lists. */
-#define STACK_SIZE	512	/* Minimum number of bytes for stack */
-
-extern char _end[];
-extern char *HEAP;
-extern char *heap_end;
-#define RESET_HEAP() ((void *)( HEAP = _end ))
-static inline char *__get_heap(size_t s, size_t a, size_t n)
-{
-	char *tmp;
-
-	HEAP = (char *)(((size_t)HEAP+(a-1)) & ~(a-1));
-	tmp = HEAP;
-	HEAP += s*n;
-	return tmp;
-}
-#define GET_HEAP(type, n) \
-	((type *)__get_heap(sizeof(type),__alignof__(type),(n)))
-
-static inline int heap_free(void)
-{
-	return heap_end-HEAP;
-}
-
-/* copy.S */
-
-void copy_to_fs(addr_t dst, void *src, size_t len);
-void *copy_from_fs(void *dst, addr_t src, size_t len);
-void copy_to_gs(addr_t dst, void *src, size_t len);
-void *copy_from_gs(void *dst, addr_t src, size_t len);
-void *memcpy(void *dst, void *src, size_t len);
-void *memset(void *dst, int c, size_t len);
-
-#define memcpy(d,s,l) __builtin_memcpy(d,s,l)
-#define memset(d,c,l) __builtin_memset(d,c,l)
-
-/* a20.c */
-int enable_a20(void);
-
-/* apm.c */
-int query_apm_bios(void);
-
-/* cmdline.c */
-int cmdline_find_option(const char *option, char *buffer, int bufsize);
-
-/* cpu.c, cpucheck.c */
-int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
-int validate_cpu(void);
-
-/* edd.c */
-void query_edd(void);
-
-/* header.S */
-void __attribute__((noreturn)) die(void);
-
-/* mca.c */
-int query_mca(void);
-
-/* memory.c */
-int detect_memory(void);
-
-/* pm.c */
-void __attribute__((noreturn)) go_to_protected_mode(void);
-
-/* pmjump.S */
-void __attribute__((noreturn))
-	protected_mode_jump(u32 entrypoint, u32 bootparams);
-
-/* printf.c */
-int sprintf(char *buf, const char *fmt, ...);
-int vsprintf(char *buf, const char *fmt, va_list args);
-int printf(const char *fmt, ...);
-
-/* string.c */
-int strcmp(const char *str1, const char *str2);
-size_t strnlen(const char *s, size_t maxlen);
-unsigned int atou(const char *s);
-
-/* tty.c */
-void puts(const char *);
-void putchar(int);
-int getchar(void);
-void kbd_flush(void);
-int getchar_timeout(void);
-
-/* video.c */
-void set_video(void);
-
-/* video-vesa.c */
-void vesa_store_edid(void);
-
-/* voyager.c */
-int query_voyager(void);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* BOOT_BOOT_H */
diff --git a/arch/i386/boot/cmdline.c b/arch/i386/boot/cmdline.c
deleted file mode 100644
index 34bb778c435..00000000000
--- a/arch/i386/boot/cmdline.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * arch/i386/boot/cmdline.c
- *
- * Simple command-line parser for early boot.
- */
-
-#include "boot.h"
-
-static inline int myisspace(u8 c)
-{
-	return c <= ' ';	/* Close enough approximation */
-}
-
-/*
- * Find a non-boolean option, that is, "option=argument".  In accordance
- * with standard Linux practice, if this option is repeated, this returns
- * the last instance on the command line.
- *
- * Returns the length of the argument (regardless of if it was
- * truncated to fit in the buffer), or -1 on not found.
- */
-int cmdline_find_option(const char *option, char *buffer, int bufsize)
-{
-	u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr;
-	addr_t cptr;
-	char c;
-	int len = -1;
-	const char *opptr = NULL;
-	char *bufptr = buffer;
-	enum {
-		st_wordstart,	/* Start of word/after whitespace */
-		st_wordcmp,	/* Comparing this word */
-		st_wordskip,	/* Miscompare, skip */
-		st_bufcpy	/* Copying this to buffer */
-	} state = st_wordstart;
-
-	if (!cmdline_ptr || cmdline_ptr >= 0x100000)
-		return -1;	/* No command line, or inaccessible */
-
-	cptr = cmdline_ptr & 0xf;
-	set_fs(cmdline_ptr >> 4);
-
-	while (cptr < 0x10000 && (c = rdfs8(cptr++))) {
-		switch (state) {
-		case st_wordstart:
-			if (myisspace(c))
-				break;
-
-			/* else */
-			state = st_wordcmp;
-			opptr = option;
-			/* fall through */
-
-		case st_wordcmp:
-			if (c == '=' &