i386: move pci

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 149 deletions

diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
deleted file mode 100644
index 8c66f275756..00000000000
--- a/arch/i386/pci/pci.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *	Low-Level PCI Access for i386 machines.
- *
- *	(c) 1999 Martin Mares <mj@ucw.cz>
- */
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-#define PCI_PROBE_BIOS		0x0001
-#define PCI_PROBE_CONF1		0x0002
-#define PCI_PROBE_CONF2		0x0004
-#define PCI_PROBE_MMCONF	0x0008
-#define PCI_PROBE_MASK		0x000f
-#define PCI_PROBE_NOEARLY	0x0010
-
-#define PCI_NO_SORT		0x0100
-#define PCI_BIOS_SORT		0x0200
-#define PCI_NO_CHECKS		0x0400
-#define PCI_USE_PIRQ_MASK	0x0800
-#define PCI_ASSIGN_ROMS		0x1000
-#define PCI_BIOS_IRQ_SCAN	0x2000
-#define PCI_ASSIGN_ALL_BUSSES	0x4000
-
-extern unsigned int pci_probe;
-extern unsigned long pirq_table_addr;
-
-enum pci_bf_sort_state {
-	pci_bf_sort_default,
-	pci_force_nobf,
-	pci_force_bf,
-	pci_dmi_bf,
-};
-
-/* pci-i386.c */
-
-extern unsigned int pcibios_max_latency;
-
-void pcibios_resource_survey(void);
-int pcibios_enable_resources(struct pci_dev *, int);
-
-/* pci-pc.c */
-
-extern int pcibios_last_bus;
-extern struct pci_bus *pci_root_bus;
-extern struct pci_ops pci_root_ops;
-
-/* pci-irq.c */
-
-struct irq_info {
-	u8 bus, devfn;			/* Bus, device and function */
-	struct {
-		u8 link;		/* IRQ line ID, chipset dependent, 0=not routed */
-		u16 bitmap;		/* Available IRQs */
-	} __attribute__((packed)) irq[4];
-	u8 slot;			/* Slot number, 0=onboard */
-	u8 rfu;
-} __attribute__((packed));
-
-struct irq_routing_table {
-	u32 signature;			/* PIRQ_SIGNATURE should be here */
-	u16 version;			/* PIRQ_VERSION */
-	u16 size;			/* Table size in bytes */
-	u8 rtr_bus, rtr_devfn;		/* Where the interrupt router lies */
-	u16 exclusive_irqs;		/* IRQs devoted exclusively to PCI usage */
-	u16 rtr_vendor, rtr_device;	/* Vendor and device ID of interrupt router */
-	u32 miniport_data;		/* Crap */
-	u8 rfu[11];
-	u8 checksum;			/* Modulo 256 checksum must give zero */
-	struct irq_info slots[0];
-} __attribute__((packed));
-
-extern unsigned int pcibios_irq_mask;
-
-extern int pcibios_scanned;
-extern spinlock_t pci_config_lock;
-
-extern int (*pcibios_enable_irq)(struct pci_dev *dev);
-extern void (*pcibios_disable_irq)(struct pci_dev *dev);
-
-extern int pci_conf1_write(unsigned int seg, unsigned int bus,
-			   unsigned int devfn, int reg, int len, u32 value);
-extern int pci_conf1_read(unsigned int seg, unsigned int bus,
-			  unsigned int devfn, int reg, int len, u32 *value);
-
-extern int pci_direct_probe(void);
-extern void pci_direct_init(int type);
-extern void pci_pcbios_init(void);
-extern void pci_mmcfg_init(int type);
-extern void pcibios_sort(void);
-
-/* pci-mmconfig.c */
-
-/* Verify the first 16 busses. We assume that systems with more busses
-   get MCFG right. */
-#define PCI_MMCFG_MAX_CHECK_BUS 16
-extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
-
-extern int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
-					   unsigned int devfn);
-extern int __init pci_mmcfg_arch_init(void);
-
-/*
- * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
- * on their northbrige except through the * %eax register. As such, you MUST
- * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
- * accessor functions.
- * In fact just use pci_config_*, nothing else please.
- */
-static inline unsigned char mmio_config_readb(void __iomem *pos)
-{
-	u8 val;
-	asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
-	return val;
-}
-
-static inline unsigned short mmio_config_readw(void __iomem *pos)
-{
-	u16 val;
-	asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
-	return val;
-}
-
-static inline unsigned int mmio_config_readl(void __iomem *pos)
-{
-	u32 val;
-	asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
-	return val;
-}
-
-static inline void mmio_config_writeb(void __iomem *pos, u8 val)
-{
-	asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writew(void __iomem *pos, u16 val)
-{
-	asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writel(void __iomem *pos, u32 val)
-{
-	asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
-}