Merge branch 'devel-stable' into devel

Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c

36 files changed, 145 insertions, 117 deletions

diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 16561ab18b3..f8a664f022b 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -223,9 +223,10 @@
 	[--sp] = RETN;
 	[--sp] = RETE;
 	[--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
-	r1.l = lo(IPEND);
-	r1.h = hi(IPEND);
+#ifdef CONFIG_DEBUG_KERNEL
+	p1.l = lo(IPEND);
+	p1.h = hi(IPEND);
+	r1 = [p1];
 	[--sp] = r1;
 #else
 	[--sp] = r0;	/* Skip IPEND as well. */
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index 565b8136855..fadfa82f93b 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -32,7 +32,6 @@ struct blackfin_cpudata {
 	struct task_struct *idle;
 	unsigned int imemctl;
 	unsigned int dmemctl;
-	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
 	unsigned long icache_invld_count;
 };
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index cbd52f86bb9..0b78b873df5 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -6,6 +6,9 @@
 extern void ack_bad_irq(unsigned int irq);
 #define ack_bad_irq ack_bad_irq
 
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
 #include <asm-generic/hardirq.h>
 
 #endif
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index d0be99be830..a36ad8dac06 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void)
 	/* Always use CHIPID, to work around ANOMALY_05000234 */
 	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
-#ifdef CONFIG_BF52x
-	/* ANOMALY_05000357
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+	/*
+	 * ANOMALY_05000364
 	 * Incorrect Revision Number in DSPID Register
 	 */
-	if (revid == 0)
-		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
-		case 0x0010:
-			revid = 0;
-			break;
-		case 0x2796:
-			revid = 1;
-			break;
-		default:
-			revid = 0xFFFF;
-			break;
-		}
+	if (ANOMALY_05000364 &&
+	    bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+		revid = 1;
 #endif
+
 	return revid;
 }
 
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index e0bf8cc0690..9f9b8281665 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 	BUG_ON(src % 4);
 	BUG_ON(size % 4);
 
-	/* Force a sync in case a previous config reset on this channel
-	 * occurred.  This is needed so subsequent writes to DMA registers
-	 * are not spuriously lost/corrupted.
-	 */
-	__builtin_bfin_ssync();
-
 	src_ch = 0;
 	/* Find an avalible memDMA channel */
 	while (1) {
-		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
-			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
-		} else {
+		if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
 			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
 			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
 		}
 
-		if (!bfin_read16(&src_ch->cfg)) {
+		if (!bfin_read16(&src_ch->cfg))
+			break;
+		else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+			bfin_write16(&src_ch->cfg, 0);
 			break;
-		} else {
-			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
-				bfin_write16(&src_ch->cfg, 0);
 		}
-
 	}
 
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
 	/* Destination */
 	bfin_write32(&dst_ch->start_addr, dst);
 	bfin_write16(&dst_ch->x_count, size >> 2);
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index beffa00a93c..6b944627137 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void)
 		*port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
 		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						& gpio_bank_saved[bank].dir;
 		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
 		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
 		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
 		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-						| gpio_bank_saved[bank].dir;
-
 		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
 	}
 	AWA_DUMMY_READ(maska);
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index d6c067782e6..685f160a5a3 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	}
 
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
-	if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-		d_tbl[i_d].addr = L1_DATA_A_START;
-		d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+	if (cpu == 0) {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
 	}
-	i_tbl[i_i].addr = L1_CODE_START;
-	i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-
+#ifdef CONFIG_SMP
+	else {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = COREB_L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	}
+#endif
 	first_switched_dcplb = i_d;
 	first_switched_icplb = i_i;
 
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 79cad0ac589..9da36bab7cc 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -361,7 +361,7 @@ static inline
 int in_mem_const(unsigned long addr, unsigned long size,
                  unsigned long const_addr, unsigned long const_size)
 {
-	return in_mem_const_off(addr, 0, size, const_addr, const_size);
+	return in_mem_const_off(addr, size, 0, const_addr, const_size);
 }
 #define IN_ASYNC(bnum, bctlnum) \
 ({ \
@@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size)
 	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #endif
 	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size)
 	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return 1;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return 1;
 #endif
 	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index d76618db50d..6a387eec6b6 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -31,7 +31,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6136c33e919..6225edae488 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu)
 	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
 
 	cpudata->idle = current;
-	cpudata->loops_per_jiffy = loops_per_jiffy;
 	cpudata->imemctl = bfin_read_IMEM_CONTROL();
 	cpudata->dmemctl = bfin_read_DMEM_CONTROL();
 }
@@ -568,17 +567,23 @@ static __init void memory_setup(void)
 #  endif				/* ANOMALY_05000263 */
 # endif				/* CONFIG_ROMFS_FS */
 
-	memory_end -= mtd_size;
-
-	if (mtd_size == 0) {
-		console_init();
-		panic("Don't boot kernel without rootfs attached.");
+	/* Since the default MTD_UCLINUX has no magic number, we just blindly
+	 * read 8 past the end of the kernel's image, and look at it.
+	 * When no image is attached, mtd_size is set to a random number
+	 * Do some basic sanity checks before operating on things
+	 */
+	if (mtd_size == 0 || memory_end <= mtd_size) {
+		pr_emerg("Could not find valid ram mtd attached.\n");
+	} else {
+		memory_end -= mtd_size;
+
+		/* Relocate MTD image to the top of memory after the uncached memory area */
+		uclinux_ram_map.phys = memory_mtd_start = memory_end;
+		uclinux_ram_map.size = mtd_size;
+		pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+			_end, mtd_size, (void *)memory_mtd_start);
+		dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 	}
-
-	/* Relocate MTD image to the top of memory after the uncached memory area */
-	uclinux_ram_map.phys = memory_mtd_start = memory_end;
-	uclinux_ram_map.size = mtd_size;
-	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
@@ -868,13 +873,6 @@ void __init setup_arch(char **cmdline_p)
 	else
 		printk(KERN_CONT "and Disabled\n");
 
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
-	/* we need to initialize the Flashrom device here since we might
-	 * do things with flash early on in the boot
-	 */
-	flash_probe();
-#endif
-
 	printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
 
 	/* Newer parts mirror SWRST bits in SYSCR */
@@ -938,10 +936,6 @@ void __init setup_arch(char **cmdline_p)
 			       CPU, bfin_revid());
 	}
 
-	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
-	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448");
-
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1164,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
 		"Calibration\t: %lu loops\n",
-		(cpudata->loops_per_jiffy * HZ) / 500000,
-		((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
-		(cpudata->loops_per_jiffy * HZ));
+		(loops_per_jiffy * HZ) / 500000,
+		((loops_per_jiffy * HZ) / 5000) % 100,
+		(loops_per_jiffy * HZ));
 
 	/* Check Cache configutation */
 	switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index a8f1329c15a..3da60fb13ce 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -29,7 +29,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8a1caf2bb5b..bf2b2d1f8ae 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	if (kernel_mode_regs(fp) || (current && !current->mm)) {
 		console_verbose();
 		oops_in_progress = 1;
-		if (strerror)
-			verbose_printk(strerror);
 	}
 
 	if (sig != SIGTRAP) {
+		if (strerror)
+			verbose_printk(strerror);
+
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -619,7 +620,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
-	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
  traps_done:
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
index 84b9c559222..e57bf6fbdf3 100644
--- a/arch/blackfin/lib/lshrdi3.c
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -27,21 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
-	SItype high, low;
-};
-
-typedef union {
-	struct DIstruct s;
-	DItype ll;
-} DIunion;
+#include "gcclib.h"
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d9791106be9..809be268e42 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 426e064062a..753ed810e1c 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -82,6 +82,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -117,6 +118,7 @@
 #define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index 0fb2ce5d840..dbade93395e 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f4867ce0c61..b09484f538f 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index b2f30f06b73..2ad68cd10ae 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 799a1d1fa89..75e563d3f9d 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 0d63f740616..c438ca89d8c 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -176,6 +176,8 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -201,6 +203,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -238,6 +241,5 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a625659dd67..ebd6cebc1fb 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a68ade8a3ca..3d743ccaff6 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 70a0ad69c61..cd83db2fb1a 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -335,6 +335,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index a3789d7ccf8..4062e24e759 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c1f76dd2c4e..bd656907b8c 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1313,10 +1313,10 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-		.irq = IRQ_PF5,
+		.irq = IRQ_PG5,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 57c128cc3b6..e66aa131f51 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -167,6 +167,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -186,6 +187,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b86662fb9de..e95d54f9af6 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index c97acdf85cd..451cf8a82a4 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -137,6 +137,7 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -160,6 +161,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index c536551eb4b..999f239fe1a 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 81f5b95cc36..dc0dd9b2bce 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 18a4cd24f67..cd040fe0bc5 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -195,6 +195,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -226,6 +227,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 94b8e277f09..a5312b2d267 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -288,6 +288,7 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index a1b50878553..fd5e8878b8c 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index a63e15c86d9..5b96ea549a0 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -37,7 +37,6 @@
 
 /* Memory Map for ADSP-BF561 processors */
 
-#ifdef CONFIG_BF561
 #define COREA_L1_CODE_START       0xFFA00000
 #define COREA_L1_DATA_A_START     0xFF800000
 #define COREA_L1_DATA_B_START     0xFF900000
@@ -74,6 +73,28 @@
 #define BFIN_DCACHESIZE	(0*1024)
 #define BFIN_DSUPBANKS	0
 #endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A.  If we aren't, then we assume Core B is not
+ * using any cache.  This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler.  Easier to check one region than a
+ * bunch of small ones.  Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH     L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH   L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH   L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH     0x14000
+# define COREB_L1_DATA_A_LENGTH   0x8000
+# define COREB_L1_DATA_B_LENGTH   0x8000
 #endif
 
 /* Level 2 Memory */
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 5a4e7c7fd92..fb1795d5be2 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -218,7 +218,7 @@ ENTRY(_ex_single_step)
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);
 	syscfg = R7;
 	jump _ex_trap_c;
 
@@ -251,7 +251,7 @@ ENTRY(_ex_single_step)
 	if !cc jump _bfin_return_from_exception;
 
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);	/* Turn off single step */
 	syscfg = R7;
 
 	/* Fall through to _bfin_return_from_exception.  */
@@ -342,9 +342,11 @@ ENTRY(_ex_trap_c)
 	r6 = retx;
 	[p5 + PDA_RETX] = r6;
 #endif
+	/* Save the state of single stepping */
 	r6 = SYSCFG;
 	[p5 + PDA_SYSCFG] = r6;
-	BITCLR(r6, 0);
+	/* Clear it while we handle the exception in IRQ5 mode */
+	BITCLR(r6, SYSCFG_SSSTEP_P);
 	SYSCFG = r6;
 
 	/* Disable all interrupts, but make sure level 5 is enabled so
@@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c)
  * exception. This is a unrecoverable event, so crash.
  * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
  */
-_double_fault:
+ENTRY(_double_fault)
 	/* Turn caches & protection off, to ensure we don't get any more
 	 * double exceptions
 	 */
@@ -872,7 +874,7 @@ ENTRY(_ret_from_exception)
 	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
-	bitclr(r0, 0);
+	bitclr(r0, SYSCFG_SSSTEP_P);		/* Turn off single step */
 	syscfg = r0;
 5:
 	rts;
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 61840059dfa..349ee3f5466 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 		return 0;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 	cpu_set(cpu, callmap);
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_RESCHEDULE;
@@ -314,6 +320,8 @@ void smp_send_stop(void)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_CPU_STOP;
@@ -450,7 +458,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	unsigned int cpu;
 
 	for_each_online_cpu(cpu)
-		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+		bogosum += loops_per_jiffy;
 
 	printk(KERN_INFO "SMP: Total of %d processors activated "
 	       "(%lu.%02lu BogoMIPS).\n",