Blackfin: unify SDH/RSI bitmasks

Avoid duplication and ugly global namespace pollution.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2 files changed, 0 insertions, 260 deletions

diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index d3bc6d1df54..abf5f750dd8 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -366,136 +366,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 3d131065f8e..be21ba5b3aa 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -646,136 +646,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */