Blackfin: unify duplicated power masks

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2 files changed, 0 insertions, 81 deletions

diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 278e8942eef..08b5eabb1ed 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -37,10 +37,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 312686a5194..5375819b614 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -1422,81 +1422,6 @@
 /* System MMR Register Bits and	Macros */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-/* PLL_CTL Masks */
-#define	PLL_CLKIN			0x0000	/* Pass	CLKIN to PLL */
-#define	PLL_CLKIN_DIV2		0x0001	/* Pass	CLKIN/2	to PLL */
-#define	DF					0x0001	 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define	PLL_OFF				0x0002	/* Shut	off PLL	clocks */
-
-#define	STOPCK				0x0008	/* Core	Clock Off		 */
-#define	PDWN				0x0020	/* Put the PLL in a Deep Sleep state */
-#define	IN_DELAY			0x0014	/* EBIU	Input Delay Select */
-#define	OUT_DELAY			0x00C0	/* EBIU	Output Delay Select */
-#define	BYPASS				0x0100	/* Bypass the PLL */
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
-
-/* PLL_CTL Macros				 */
-#ifdef _MISRA_RULES
-#define	SET_MSEL(x)		(((x)&0x3Fu) <<	0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define	SET_OUT_DELAY(x)	(((x)&0x03u) <<	0x6)
-#define	SET_IN_DELAY(x)		((((x)&0x02u) << 0x3) |	(((x)&0x01u) <<	0x2))
-#else
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define	SET_OUT_DELAY(x)	(((x)&0x03) << 0x6)
-#define	SET_IN_DELAY(x)		((((x)&0x02) <<	0x3) | (((x)&0x01) << 0x2))
-#endif /* _MISRA_RULES */
-
-/* PLL_DIV Masks */
-#define	SSEL				0x000F	/* System Select */
-#define	CSEL				0x0030	/* Core	Select */
-#define	CSEL_DIV1		0x0000	/*		CCLK = VCO / 1 */
-#define	CSEL_DIV2		0x0010	/*		CCLK = VCO / 2 */
-#define	CSEL_DIV4		0x0020	/*		CCLK = VCO / 4 */
-#define	CSEL_DIV8		0x0030	/*		CCLK = VCO / 8 */
-
-#define	SCLK_DIV(x)			(x)		/* SCLK	= VCO /	x */
-
-/* PLL_DIV Macros							 */
-#ifdef _MISRA_RULES
-#define	SET_SSEL(x)			((x)&0xFu)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#else
-#define	SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#endif /* _MISRA_RULES */
-
-/* PLL_STAT Masks										 */
-#define	ACTIVE_PLLENABLED	0x0001	/* Processor In	Active Mode With PLL Enabled */
-#define	FULL_ON				0x0002	/* Processor In	Full On	Mode */
-#define	ACTIVE_PLLDISABLED	0x0004	/* Processor In	Active Mode With PLL Disabled */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been	Reached */
-
-/* VR_CTL Masks										 */
-#define	FREQ			0x0003	/* Switching Oscillator	Frequency For Regulator */
-#define	HIBERNATE		0x0000	/*		Powerdown/Bypass On-Board Regulation */
-#define	FREQ_333		0x0001	/*		Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/*		Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/*		Switching Frequency Is 1 MHz */
-
-#define	GAIN			0x000C	/* Voltage Level Gain */
-#define	GAIN_5			0x0000	/*		GAIN = 5 */
-#define	GAIN_10			0x0004	/*		GAIN = 10 */
-#define	GAIN_20			0x0008	/*		GAIN = 20 */
-#define	GAIN_50			0x000C	/*		GAIN = 50 */
-
-#define	VLEV			0x00F0	/* Internal Voltage Level - Only Program Values	Within Specifications */
-#define	VLEV_100		0x0090	/*	VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_105		0x00A0	/*	VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_110		0x00B0	/*	VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_115		0x00C0	/*	VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_120		0x00D0	/*	VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_125		0x00E0	/*	VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_130		0x00F0	/*	VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From	Hibernate */
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
-#define	MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
-#define	SCKELOW			0x8000	/* Do Not Drive	SCKE High During Reset After Hibernate */
-
 /* SWRST Mask */
 #define	SYSTEM_RESET	0x0007	/* Initiates A System Software Reset */
 #define	DOUBLE_FAULT	0x0008	/* Core	Double Fault Causes Reset */