Blackfin arch: unify the duplicated portions of __start and split mach-specific pieces into _mach_early_start where they will be easier to trim over time

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

1 files changed, 3 insertions, 128 deletions

diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 7f0a7a0c6fd..6603967367e 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -30,74 +30,16 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
 .extern _bf53x_relocate_l1_mem
 
-#define INITIAL_STACK	0xFFB01000
-
 __INIT
 
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
+ENTRY(_mach_early_start)
 	p0.h = hi(FIO_MASKA_C);
 	p0.l = lo(FIO_MASKA_C);
 	r0 = 0xFFFF(Z);
@@ -110,24 +52,6 @@ ENTRY(__start)
 	w[p0] = r0.L;	/* Disable all interrupts */
 	ssync;
 
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
 	/* Initialise UART - when booting from u-boot, the UART is not disabled
 	 * so if we dont initalize here, our serial console gets hosed */
 	p0.h = hi(BFIN_UART_LCR);
@@ -154,57 +78,8 @@ ENTRY(__start)
 	w[p0] = r0.L;	/* To enable UART clock */
 	ssync;
 
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
+	rts;
+ENDPROC(_mach_early_start)
 
 __FINIT