Blackfin: fix early L1 relocation crash

Our early L1 relocate code may implicitly call code which lives in L1
memory.  This is due to the dma_memcpy() rewrite that made the DMA code
lockless and safe to be used by multiple processes.  If we start the
early DMA memcpy to relocate things into L1 instruction but then our
DMA memcpy code calls a function that lives in L1, things fall apart.
As such, create a small dedicated DMA memcpy routine that we can assume
sanity at boot time.

Reported-by: Filip Van Rillaer <filip.vanrillaer@oneaccess-net.com>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 28 insertions, 23 deletions

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index a58687bdee6..0838eafed17 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -150,40 +150,45 @@ void __init bfin_relocate_l1_mem(void)
 	unsigned long l1_data_b_length;
 	unsigned long l2_length;
 
+	/*
+	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
+	 * we know that everything about l1 text/data is nice and aligned,
+	 * so copy by 4 byte chunks, and don't worry about overlapping
+	 * src/dest.
+	 *
+	 * We can't use the dma_memcpy functions, since they can call
+	 * scheduler functions which might be in L1 :( and core writes
+	 * into L1 instruction cause bad access errors, so we are stuck,
+	 * we are required to use DMA, but can't use the common dma
+	 * functions. We can't use memcpy either - since that might be
+	 * going to be in the relocated L1
+	 */
+
 	blackfin_dma_early_init();
 
+	/* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
 	l1_code_length = _etext_l1 - _stext_l1;
-	if (l1_code_length > L1_CODE_LENGTH)
-		panic("L1 Instruction SRAM Overflow\n");
-	/* cannot complain as printk is not available as yet.
-	 * But we can continue booting and complain later!
-	 */
-
-	/* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
-	dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+	if (l1_code_length)
+		early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
 
+	/* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
 	l1_data_a_length = _sbss_l1 - _sdata_l1;
-	if (l1_data_a_length > L1_DATA_A_LENGTH)
-		panic("L1 Data SRAM Bank A Overflow\n");
-
-	/* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
-	dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+	if (l1_data_a_length)
+		early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
 
+	/* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
 	l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
-	if (l1_data_b_length > L1_DATA_B_LENGTH)
-		panic("L1 Data SRAM Bank B Overflow\n");
-
-	/* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
-	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+	if (l1_data_b_length)
+		early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
 
+	early_dma_memcpy_done();
+
+	/* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
 	if (L2_LENGTH != 0) {
 		l2_length = _sbss_l2 - _stext_l2;
-		if (l2_length > L2_LENGTH)
-			panic("L2 SRAM Overflow\n");
-
-		/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
-		dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+		if (l2_length)
+			memcpy(_stext_l2, _l2_lma_start, l2_length);
 	}
 }