Merge branch 'irqchip-consolidation' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable

Conflicts:
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-omap4panda.c
	arch/arm/mach-omap2/include/mach/omap4-common.h
	arch/arm/plat-omap/include/plat/irqs.h

The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h
and the other trivial conflicts resolved.  The now empty ifdef in irqs.h
was also eliminated.

175 files changed, 984 insertions, 1620 deletions

diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index 9b29a623aaf..3f9abd6b696 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -22,11 +22,10 @@
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 
 	sdhci@c8000600 {
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		support-8bit;
 	};
 };
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 74df9ca2be3..81a933eb090 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,8 +1,14 @@
 config ARM_GIC
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+	bool
+
+config GIC_NON_BANKED
 	bool
 
 config ARM_VIC
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	bool
 
 config ARM_VIC_NR
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 0e6ae470c94..a1feb6b4f9f 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -40,13 +40,36 @@
 #include <linux/slab.h>
 
 #include <asm/irq.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+union gic_base {
+	void __iomem *common_base;
+	void __percpu __iomem **percpu_base;
+};
 
-/* Address of GIC 0 CPU interface */
-void __iomem *gic_cpu_base_addr __read_mostly;
+struct gic_chip_data {
+	unsigned int irq_offset;
+	union gic_base dist_base;
+	union gic_base cpu_base;
+#ifdef CONFIG_CPU_PM
+	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+	u32 __percpu *saved_ppi_enable;
+	u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+	struct irq_domain domain;
+#endif
+	unsigned int gic_irqs;
+#ifdef CONFIG_GIC_NON_BANKED
+	void __iomem *(*get_base)(union gic_base *);
+#endif
+};
+
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
 
 /*
  * Supported arch specific GIC irq extension.
@@ -67,16 +90,48 @@ struct irq_chip gic_arch_extn = {
 
 static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
 
+#ifdef CONFIG_GIC_NON_BANKED
+static void __iomem *gic_get_percpu_base(union gic_base *base)
+{
+	return *__this_cpu_ptr(base->percpu_base);
+}
+
+static void __iomem *gic_get_common_base(union gic_base *base)
+{
+	return base->common_base;
+}
+
+static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->dist_base);
+}
+
+static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->cpu_base);
+}
+
+static inline void gic_set_base_accessor(struct gic_chip_data *data,
+					 void __iomem *(*f)(union gic_base *))
+{
+	data->get_base = f;
+}
+#else
+#define gic_data_dist_base(d)	((d)->dist_base.common_base)
+#define gic_data_cpu_base(d)	((d)->cpu_base.common_base)
+#define gic_set_base_accessor(d,f)
+#endif
+
 static inline void __iomem *gic_dist_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data->dist_base;
+	return gic_data_dist_base(gic_data);
 }
 
 static inline void __iomem *gic_cpu_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data->cpu_base;
+	return gic_data_cpu_base(gic_data);
 }
 
 static inline unsigned int gic_irq(struct irq_data *d)
@@ -215,6 +270,32 @@ static int gic_set_wake(struct irq_data *d, unsigned int on)
 #define gic_set_wake	NULL
 #endif
 
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+	struct gic_chip_data *gic = &gic_data[0];
+	void __iomem *cpu_base = gic_data_cpu_base(gic);
+
+	do {
+		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+		irqnr = irqstat & ~0x1c00;
+
+		if (likely(irqnr > 15 && irqnr < 1021)) {
+			irqnr = irq_domain_to_irq(&gic->domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+		if (irqnr < 16) {
+			writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+#ifdef CONFIG_SMP
+			handle_IPI(irqnr, regs);
+#endif
+			continue;
+		}
+		break;
+	} while (1);
+}
+
 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct gic_chip_data *chip_data = irq_get_handler_data(irq);
@@ -225,7 +306,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 
 	raw_spin_lock(&irq_controller_lock);
-	status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
+	status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
 	raw_spin_unlock(&irq_controller_lock);
 
 	gic_irq = (status & 0x3ff);
@@ -270,7 +351,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	u32 cpumask;
 	unsigned int gic_irqs = gic->gic_irqs;
 	struct irq_domain *domain = &gic->domain;
-	void __iomem *base = gic->dist_base;
+	void __iomem *base = gic_data_dist_base(gic);
 	u32 cpu = 0;
 
 #ifdef CONFIG_SMP
@@ -330,8 +411,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 
 static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 {
-	void __iomem *dist_base = gic->dist_base;
-	void __iomem *base = gic->cpu_base;
+	void __iomem *dist_base = gic_data_dist_base(gic);
+	void __iomem *base = gic_data_cpu_base(gic);
 	int i;
 
 	/*
@@ -368,7 +449,7 @@ static void gic_dist_save(unsigned int gic_nr)
 		BUG();
 
 	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data[gic_nr].dist_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
 	if (!dist_base)
 		return;
@@ -403,7 +484,7 @@ static void gic_dist_restore(unsigned int gic_nr)
 		BUG();
 
 	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data[gic_nr].dist_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
 	if (!dist_base)
 		return;
@@ -439,8 +520,8 @@ static void gic_cpu_save(unsigned int gic_nr)
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
-	dist_base = gic_data[gic_nr].dist_base;
-	cpu_base = gic_data[gic_nr].cpu_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
 	if (!dist_base || !cpu_base)
 		return;
@@ -465,8 +546,8 @@ static void gic_cpu_restore(unsigned int gic_nr)
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
-	dist_base = gic_data[gic_nr].dist_base;
-	cpu_base = gic_data[gic_nr].cpu_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
 	if (!dist_base || !cpu_base)
 		return;
@@ -491,6 +572,11 @@ static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
 	int i;
 
 	for (i = 0; i < MAX_GIC_NR; i++) {
+#ifdef CONFIG_GIC_NON_BANKED
+		/* Skip over unused GICs */
+		if (!gic_data[i].get_base)
+			continue;
+#endif
 		switch (cmd) {
 		case CPU_PM_ENTER:
 			gic_cpu_save(i);
@@ -563,8 +649,9 @@ const struct irq_domain_ops gic_irq_domain_ops = {
 #endif
 };
 
-void __init gic_init(unsigned int gic_nr, int irq_start,
-	void __iomem *dist_base, void __iomem *cpu_base)
+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+			   void __iomem *dist_base, void __iomem *cpu_base,
+			   u32 percpu_offset)
 {
 	struct gic_chip_data *gic;
 	struct irq_domain *domain;
@@ -574,15 +661,42 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 
 	gic = &gic_data[gic_nr];
 	domain = &gic->domain;
-	gic->dist_base = dist_base;
-	gic->cpu_base = cpu_base;
+#ifdef CONFIG_GIC_NON_BANKED
+	if (percpu_offset) { /* Frankein-GIC without banked registers... */
+		unsigned int cpu;
+
+		gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
+		gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
+		if (WARN_ON(!gic->dist_base.percpu_base ||
+			    !gic->cpu_base.percpu_base)) {
+			free_percpu(gic->dist_base.percpu_base);
+			free_percpu(gic->cpu_base.percpu_base);
+			return;
+		}
+
+		for_each_possible_cpu(cpu) {
+			unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+			*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
+			*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
+		}
+
+		gic_set_base_accessor(gic, gic_get_percpu_base);
+	} else
+#endif
+	{			/* Normal, sane GIC... */
+		WARN(percpu_offset,
+		     "GIC_NON_BANKED not enabled, ignoring %08x offset!",
+		     percpu_offset);
+		gic->dist_base.common_base = dist_base;
+		gic->cpu_base.common_base = cpu_base;
+		gic_set_base_accessor(gic, gic_get_common_base);
+	}
 
 	/*
 	 * For primary GICs, skip over SGIs.
 	 * For secondary GICs, skip over PPIs, too.
 	 */
 	if (gic_nr == 0) {
-		gic_cpu_base_addr = cpu_base;
 		domain->hwirq_base = 16;
 		if (irq_start > 0)
 			irq_start = (irq_start & ~31) + 16;
@@ -593,7 +707,7 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources.
 	 */
-	gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+	gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
 	gic_irqs = (gic_irqs + 1) * 32;
 	if (gic_irqs > 1020)
 		gic_irqs = 1020;
@@ -641,7 +755,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	dsb();
 
 	/* this always happens on GIC0 */
-	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
 }
 #endif
 
@@ -652,6 +766,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *cpu_base;
 	void __iomem *dist_base;
+	u32 percpu_offset;
 	int irq;
 	struct irq_domain *domain = &gic_data[gic_cnt].domain;
 
@@ -664,9 +779,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
 	cpu_base = of_iomap(node, 1);
 	WARN(!cpu_base, "unable to map gic cpu registers\n");
 
+	if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
 	domain->of_node = of_node_get(node);
 
-	gic_init(gic_cnt, -1, dist_base, cpu_base);
+	gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset);
 
 	if (parent) {
 		irq = irq_of_parse_and_map(node, 0);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 01f18a421b1..6ed41ec2bbf 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -19,17 +19,22 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-#ifdef CONFIG_PM
 /**
  * struct vic_device - VIC PM device
  * @irq: The IRQ number for the base of the VIC.
@@ -40,6 +45,7 @@
  * @int_enable: Save for VIC_INT_ENABLE.
  * @soft_int: Save for VIC_INT_SOFT.
  * @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
  */
 struct vic_device {
 	void __iomem	*base;
@@ -50,13 +56,13 @@ struct vic_device {
 	u32		int_enable;
 	u32		soft_int;
 	u32		protect;
+	struct irq_domain domain;
 };
 
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
-#endif /* CONFIG_PM */
 
 /**
  * vic_init2 - common initialisation code
@@ -156,39 +162,50 @@ static int __init vic_pm_init(void)
 	return 0;
 }
 late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
 
 /**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
  * @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
  *
  * Register the VIC with the system device tree so that it can be notified
  * of suspend and resume requests and ensure that the correct actions are
  * taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
  */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+				u32 resume_sources, struct device_node *node)
 {
 	struct vic_device *v;
 
-	if (vic_id >= ARRAY_SIZE(vic_devices))
+	if (vic_id >= ARRAY_SIZE(vic_devices)) {
 		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-	else {
-		v = &vic_devices[vic_id];
-		v->base = base;
-		v->resume_sources = resume_sources;
-		v->irq = irq;
-		vic_id++;
+		return;
 	}
+
+	v = &vic_devices[vic_id];
+	v->base = base;
+	v->resume_sources = resume_sources;
+	v->irq = irq;
+	vic_id++;
+
+	v->domain.irq_base = irq;
+	v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+	v->domain.of_node = of_node_get(node);
+	v->domain.ops = &irq_domain_simple_ops;
+#endif /* CONFIG_OF */
+	irq_domain_add(&v->domain);
 }
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
 
 static void vic_ack_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 	/* moreover, clear the soft-triggered, in case it was the reason */
 	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
@@ -197,14 +214,14 @@ static void vic_ack_irq(struct irq_data *d)
 static void vic_mask_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 }
 
 static void vic_unmask_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
@@ -226,7 +243,7 @@ static struct vic_device *vic_from_irq(unsigned int irq)
 static int vic_set_wake(struct irq_data *d, unsigned int on)
 {
 	struct vic_device *v = vic_from_irq(d->irq);
-	unsigned int off = d->irq & 31;
+	unsigned int off = d->hwirq;
 	u32 bit = 1 << off;
 
 	if (!v)
@@ -330,15 +347,9 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 	vic_set_irq_sources(base, irq_start, vic_sources);
 }
 
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+			      u32 vic_sources, u32 resume_sources,
+			      struct device_node *node)
 {
 	unsigned int i;
 	u32 cellid = 0;
@@ -375,5 +386,81 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_set_irq_sources(base, irq_start, vic_sources);
 
-	vic_pm_register(base, irq_start, resume_sources);
+	vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+		     u32 vic_sources, u32 resume_sources)
+{
+	__vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+	void __iomem *regs;
+	int irq_base;
+
+	if (WARN(parent, "non-root VICs are not supported"))
+		return -EINVAL;
+
+	regs = of_iomap(node, 0);
+	if (WARN_ON(!regs))
+		return -EIO;
+
+	irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+	if (WARN_ON(irq_base < 0))
+		goto out_unmap;
+
+	__vic_init(regs, irq_base, ~0, ~0, node);
+
+	return 0;
+
+ out_unmap:
+	iounmap(regs);
+
+	return -EIO;
+}
+#endif /* CONFIG OF */
+
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+	u32 stat, irq;
+	int handled = 0;
+
+	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+	while (stat) {
+		irq = ffs(stat) - 1;
+		handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+		stat &= ~(1 << irq);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+	int i, handled;
+
+	do {
+		for (i = 0, handled = 0; i < vic_id; ++i)
+			handled |= handle_one_vic(&vic_devices[i], regs);
+	} while (handled);
 }
diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S
deleted file mode 100644
index 3ceb85e4385..00000000000
--- a/arch/arm/include/asm/entry-macro-vic2.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* arch/arm/include/asm/entry-macro-vic2.S
- *
- * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for a device with two VICs
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* This should be included from <mach/entry-macro.S> with the necessary
- * defines for virtual addresses and IRQ bases for the two vics.
- *
- * The code needs the following defined:
- *	IRQ_VIC0_BASE	IRQ number of VIC0's first IRQ
- *	IRQ_VIC1_BASE	IRQ number of VIC1's first IRQ
- *	VA_VIC0		Virtual address of VIC0
- *	VA_VIC1		Virtual address of VIC1
- *
- * Note, code assumes VIC0's virtual address is an ARM immediate constant
- * away from VIC1.
-*/
-
-#include <asm/hardware/vic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, #IRQ_VIC0_BASE + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
deleted file mode 100644
index 74ebc803904..00000000000
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-gic.S
- *
- * Low-level IRQ helper macros for GIC
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/gic.h>
-
-#ifndef HAVE_GET_IRQNR_PREAMBLE
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =gic_cpu_base_addr
-	ldr	\base, [\base]
-	.endm
-#endif
-
-/*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec.  To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-31 are local.  We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt.  We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-	/* bits 12-10 = src CPU, 9-0 = int # */
-
-	ldr	\tmp, =1021
-	bic     \irqnr, \irqstat, #0x1c00
-	cmp     \irqnr, #15
-	cmpcc	\irqnr, \irqnr
-	cmpne	\irqnr, \tmp
-	cmpcs	\irqnr, \irqnr
-	.endm
-
-/* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
-	.macro test_for_ipi, irqnr, irqstat, base, tmp
-	bic	\irqnr, \irqstat, #0x1c00
-	cmp	\irqnr, #16
-	strcc	\irqstat, [\base, #GIC_CPU_EOI]
-	cmpcs	\irqnr, \irqnr
-	.endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 3e91f22046f..4bdfe001869 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -36,30 +36,22 @@
 #include <linux/irqdomain.h>
 struct device_node;
 
-extern void __iomem *gic_cpu_base_addr;
 extern struct irq_chip gic_arch_extn;
 
-void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
+		    u32 offset);
 int gic_of_init(struct device_node *node, struct device_node *parent);
 void gic_secondary_init(unsigned int);
+void gic_handle_irq(struct pt_regs *regs);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 
-struct gic_chip_data {
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-#ifdef CONFIG_CPU_PM
-	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
-	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
-	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
-	u32 __percpu *saved_ppi_enable;
-	u32 __percpu *saved_ppi_conf;
-#endif
-#ifdef CONFIG_IRQ_DOMAIN
-	struct irq_domain domain;
-#endif
-	unsigned int gic_irqs;
-};
+static inline void gic_init(unsigned int nr, int start,
+			    void __iomem *dist , void __iomem *cpu)
+{
+	gic_init_bases(nr, start, dist, cpu, 0);
+}
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index 5d72550a809..f42ebd61959 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,15 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+struct device_node;
+struct pt_regs;
+
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-#endif
+int vic_of_init(struct device_node *node, struct device_node *parent);
+void vic_handle_irq(struct pt_regs *regs);
 
+#endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9ad50c4208a..bd49a6a2a17 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -36,12 +36,11 @@
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
-	ldr	r1, [r1]
 	adr	lr, BSYM(9997f)
-	teq	r1, #0
-	movne	pc, r1
-#endif
+	ldr	pc, [r1]
+#else
 	arch_irq_handler_default
+#endif
 9997:
 	.endm
 
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index a4401d6b5b0..adad70db70e 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -98,7 +98,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -1021,8 +1021,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1035,7 +1035,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01d8bbd1468..66591fa53e0 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -877,8 +877,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -891,7 +891,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 24b6f8c0440..25e3464fb07 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -837,8 +837,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -851,7 +851,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3b70b3897d9..ae78f4d03b7 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -816,8 +816,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -830,7 +830,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 3faa1fde9ad..ad017eb1f8d 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1196,8 +1196,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1210,7 +1210,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 000b5e1da96..09a16d6bd5c 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -197,7 +197,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 static struct resource usba_udc_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_UDPHS_FIFO,
@@ -1332,8 +1332,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1346,7 +1346,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 305a851b5bf..628eb566d60 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -75,7 +75,7 @@ void __init at91_add_device_hdmac(void) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -908,8 +908,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -922,7 +922,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 649b052231f..12a3f955162 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -384,7 +384,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
 #include <video/s1d13xxxfb.h>
 
 
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
 {
 	/* NWAIT Signal */
 	at91_set_A_periph(AT91_PIN_PC6, 0);
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
index 8eb459f3f5b..8e4a1bd0ab1 100644
--- a/arch/arm/mach-at91/include/mach/vmalloc.h
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -21,6 +21,8 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
+#include <mach/hardware.h>
+
 #define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
 
 #endif
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 55f7b4b08ab..594852fe24c 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -201,5 +202,6 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.timer		= &cns3xxx_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= cns3420_init,
 MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
index d87bfc397d3..01c57df5f71 100644
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
@@ -8,8 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/hardware/entry-macro-gic.S>
-
 		.macro	disable_fiq
 		.endm
 
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 0713448206a..d9b0ea2ba4d 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= adssphere_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 70ef8c527d2..9bbae0835f2 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -39,6 +39,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -250,6 +251,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -261,6 +263,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -272,6 +275,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -283,6 +287,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -294,6 +299,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -305,6 +311,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -316,6 +323,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
@@ -327,6 +335,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 45ee205856f..1dd32a7c5f1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= gesbc9312_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
index 96b85e2c2c0..9be6edcf904 100644
--- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -9,51 +9,9 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-#include <mach/ep93xx-regs.h>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
-		orr	\base, \base, #0x000b0000
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base]		@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		eor	\base, \base, #0x00070000
-		ldr	\irqstat, [\base]		@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:
-		.endm
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index e72f7368876..a6dae6c2e3c 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -18,6 +18,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,6 +81,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END
@@ -91,6 +93,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END
@@ -102,6 +105,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END
@@ -113,6 +117,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 52e090dc9d2..40121ba8e71 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,6 +25,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,6 +81,7 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= simone_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 8121e3aedc0..ec7c63ff01e 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -31,6 +31,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -177,6 +178,7 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer 		= &ep93xx_timer,
 	.init_machine	= snappercl15_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 8b2f1435bca..760384e6407 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -23,6 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/ts72xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -247,6 +248,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	.atag_offset	= 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= ts72xx_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
index 90ec247f3b3..6e34485caa3 100644
--- a/arch/arm/mach-exynos/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -15,6 +15,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/proc-fns.h>
+#include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 
@@ -33,8 +34,6 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 
-unsigned int gic_bank_offset __read_mostly;
-
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -207,27 +206,14 @@ void __init exynos4_init_clocks(int xtal)
 	exynos4_setup_clocks();
 }
 
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
-	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (gic_bank_offset * smp_processor_id());
-
-	gic_data->dist_base = S5P_VA_GIC_DIST +
-			    (gic_bank_offset * smp_processor_id());
-}
-
 void __init exynos4_init_irq(void)
 {
 	int irq;
+	unsigned int bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+	gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8e37b..3ba4f547534 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,83 +9,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\tmp, #0
-
-		mrc	p15, 0, \base, c0, c0, 5
-		and	\base, \base, #3
-		cmp	\base, #0
-		beq	1f
-
-		ldr	\tmp, =gic_bank_offset
-		ldr	\tmp, [\tmp]
-		cmp	\base, #1
-		beq	1f
-
-		cmp	\base, #2
-		addeq	\tmp, \tmp, \tmp
-		addne	\tmp, \tmp, \tmp, LSL #1
-
-1:		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		add	\base, \base, \tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #15
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-		addne	\irqnr, \irqnr, #32
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index f0ca6c157d2..49da3089249 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,6 +16,7 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
@@ -210,6 +211,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe18716..5acec11821a 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -32,6 +32,7 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
@@ -1333,6 +1334,7 @@ MACHINE_START(NURI, "NURI")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f80b563f2be..5561b06c38e 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -22,6 +22,7 @@
 #include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -694,6 +695,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fcf2e0e23d5..722d82d7f21 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,6 +21,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/backlight.h>
@@ -287,6 +288,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
@@ -297,6 +299,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afabe7b..edc60b6108e 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -21,6 +21,7 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -375,6 +376,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &smdkv310_reserve,
@@ -385,6 +387,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177ff4b4..48e85b03cb1 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -21,9 +21,10 @@
 #include <linux/mmc/host.h>
 #include <linux/i2c-gpio.h>
 #include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
+ <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
@@ -1058,6 +1059,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 69ffb2fb387..60bc45e3e70 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,7 +32,6 @@
 
 #include <plat/cpu.h>
 
-extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -65,31 +64,6 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
-	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				(gic_bank_offset * smp_processor_id());
-	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(gic_bank_offset * smp_processor_id());
-	int i;
-
-	/*
-	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 */
-	__raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	__raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-	/*
-	 * Set priority on PPI and SGI interrupts
-	 */
-	for (i = 0; i < 32; i += 4)
-		__raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
-	__raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
-	__raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
@@ -97,7 +71,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	exynos4_gic_secondary_init();
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index b82dcf08e74..89bdf0039f7 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -140,6 +140,7 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
 	.map_io		= highbank_map_io,
 	.init_irq	= highbank_init_irq,
 	.timer		= &highbank_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
 MACHINE_END
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
index 73c11297509..a14f9e62ca9 100644
--- a/arch/arm/mach-highbank/include/mach/entry-macro.S
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
 	.macro	disable_fiq
 	.endm
 
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 22d85889f62..cfede5768aa 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -1,22 +1,26 @@
-zreladdr-$(CONFIG_ARCH_MX1)	+= 0x08008000
-params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
-initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
+params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
+initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
 
-zreladdr-$(CONFIG_MACH_MX21)	+= 0xC0008000
-params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
+params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
 
-zreladdr-$(CONFIG_ARCH_MX25)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX25)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
 
-zreladdr-$(CONFIG_MACH_MX27)	+= 0xA0008000
-params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
+params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
 
-zreladdr-$(CONFIG_ARCH_MX3)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index e0b926dfece..613a1b993bf 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1139,7 +1139,7 @@ static int _clk_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
-		  ((d->bm_pred >> d->bp_pred) + 1);
+		  ((d->bm_podf >> d->bp_podf) + 1);
 
 	div = parent_rate / rate;
 	if (div == 0)
@@ -2002,6 +2002,21 @@ int __init mx6q_clocks_init(void)
 	clk_set_rate(&asrc_serial_clk, 1500000);
 	clk_set_rate(&enfc_clk, 11000000);
 
+	/*
+	 * Before pinctrl API is available, we have to rely on the pad
+	 * configuration set up by bootloader.  For usdhc example here,
+	 * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+	 * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+	 *
+	 * FIXME: This is should be removed after pinctrl API is available.
+	 * At that time, usdhc driver can call pinctrl API to change pad
+	 * configuration dynamically per different usdhc clock settings.
+	 */
+	clk_set_rate(&usdhc1_clk, 49500000);
+	clk_set_rate(&usdhc2_clk, 49500000);
+	clk_set_rate(&usdhc3_clk, 49500000);
+	clk_set_rate(&usdhc4_clk, 49500000);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 4285dfd80b6..4ad3969b988 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
 
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 71de5062c71..db81ed53103 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -42,8 +42,8 @@
 
 extern struct sys_timer msm_timer;
 
-static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index b04468e7d00..ed359812853 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -32,8 +32,8 @@
 
 #include "devices.h"
 
-static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8960_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&
@@ -99,6 +99,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
 	.map_io = msm8960_map_io,
 	.init_irq = msm8960_init_irq,
 	.timer = &msm_timer,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_sim_init,
 MACHINE_END
 
@@ -108,6 +109,7 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
 	.map_io = msm8960_map_io,
 	.init_irq = msm8960_init_irq,
 	.timer = &msm_timer,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_rumi3_init,
 MACHINE_END
 
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index cf38e2284fa..0a113424632 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -28,8 +28,8 @@
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
-static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&
@@ -108,6 +108,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
@@ -117,6 +118,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
@@ -126,6 +128,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
@@ -135,6 +138,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
deleted file mode 100644
index 717076f3ca7..00000000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Low-level IRQ helper macros
- *
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/entry-macro-gic.S>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
deleted file mode 100644
index 70563ed11b3..00000000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-vic.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <mach/msm_iomap.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index b16f082eeb6..41f7003ef34 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -16,8 +16,27 @@
  *
  */
 
-#if defined(CONFIG_ARM_GIC)
-#include <mach/entry-macro-qgic.S>
-#else
-#include <mach/entry-macro-vic.S>
+	.macro	disable_fiq
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+#if !defined(CONFIG_ARM_GIC)
+#include <mach/msm_iomap.h>
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
 #endif
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
index 232f97a0450..bafabb50258 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-msm/scm.c
@@ -180,6 +180,9 @@ static u32 smc(u32 cmd_addr)
 			__asmeq("%1", "r0")
 			__asmeq("%2", "r1")
 			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
 			"smc	#0	@ switch to secure world\n"
 			: "=r" (r0)
 			: "r" (r0), "r" (r1), "r" (r2)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 2aacf41c48e..4cb27697719 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1281,9 +1281,9 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
 	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
 
 DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -1634,6 +1634,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
 				   unsigned long *ckih1, unsigned long *ckih2)
 {
@@ -1671,3 +1672,4 @@ int __init mx53_clocks_init_dt(void)
 	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
 	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
 }
+#endif
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index ac2316d53d3..064ec5abaa5 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -471,7 +471,8 @@ static void __init mx28evk_init(void)
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+	else
+		mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
 
 	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc1-slot-power");
@@ -480,7 +481,6 @@ static void __init mx28evk_init(void)
 	else
 		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 	mx28_add_rtc_stmp3xxx();
 
 	gpio_led_register_device(0, &mx28evk_led_data);
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index 844f1f9acbd..6e9f1cbe163 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -18,22 +18,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <mach/hardware.h>
 
 		.macro  disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =io_p2v(0x001ff000)
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0]
-		clz	\irqnr, \irqstat
-		rsb     \irqnr, \irqnr, #31
-		cmp	\irqstat, #0
-		.endm
-
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 90903dd44cb..ef8cf3574a0 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -203,6 +204,7 @@ MACHINE_START(NXDB500, "Hilscher nxdb500")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &netx_timer,
 	.init_machine	= nxdb500_init,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index c63384aba50..588558bdd80 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -96,6 +97,7 @@ MACHINE_START(NXDKN, "Hilscher nxdkn")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &netx_timer,
 	.init_machine	= nxdkn_init,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 8f548ec83ad..cfcbb503864 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -180,6 +181,7 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &netx_timer,
 	.init_machine	= nxeb500hmi_init,
 MACHINE_END
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 0cbb74c96ef..f98259c050e 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -280,6 +281,7 @@ MACHINE_START(NOMADIK, "NHK8815")
 	.atag_offset	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &nomadik_timer,
 	.init_machine	= nhk8815_platform_init,
 MACHINE_END
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
index 49f1aa3bb42..98ea1c1fbba 100644
--- a/arch/arm/mach-nomadik/include/mach/entry-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -6,38 +6,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
 	.macro	disable_fiq
 	.endm
 
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =IO_ADDRESS(NOMADIK_IC_BASE)
-	.endm
-
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	/* This stanza gets the irq mask from one of two status registers */
-	mov	\irqnr, #0
-	ldr	\irqstat, [\base, #VIC_REG_IRQSR0]	@ get masked status
-	cmp	\irqstat, #0
-	bne	1001f
-	add	\irqnr, \irqnr, #32
-	ldr	\irqstat, [\base, #VIC_REG_IRQSR1]	@ get masked status
-
-1001:	tst	\irqstat, #15
-	bne	1002f
-	add	\irqnr, \irqnr, #4
-	movs	\irqstat, \irqstat, lsr #4
-	bne	1001b
-1002:	tst	\irqstat, #1
-	bne	1003f
-	add	\irqnr, \irqnr, #1
-	movs	\irqstat, \irqstat, lsr #1
-	bne	1002b
-1003:	/* EQ will be set if no irqs pending */
-	.endm
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 50341471890..22f7c97a272 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,6 +25,7 @@ config ARCH_OMAP2
 	depends on ARCH_OMAP2PLUS
 	default y
 	select CPU_V6
+	select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -36,6 +37,7 @@ config ARCH_OMAP3
 	select ARCH_HAS_OPP
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
+	select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index a17a6c49e18..d88143faca5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -301,6 +301,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap2_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 670919c0485..83126368ed9 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -728,6 +728,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 63f4b4fefb4..7969dd904bd 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -215,6 +215,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index cff2e3249fe..ef2bbc09428 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -27,6 +27,7 @@
 #include <linux/leds_pwm.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -983,6 +984,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 25704759d24..7e90f93263d 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -98,6 +98,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_crane_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 56ea01184ec..551cae8d9b8 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -491,6 +491,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 9aea158ba51..5a66480feed 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -354,6 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap2_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e1de33ebf95..510b6a2ff0f 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -634,6 +634,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -644,6 +645,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
 	.map_io         = omap3_map_io,
 	.init_early     = omap3630_init_early,
 	.init_irq       = omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine   = cm_t3730_init,
 	.timer          = &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 952df9b6c02..efc5cedb1fb 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -299,6 +299,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 99e6e7a76d2..d81ea7fa75e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -660,6 +660,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index a89d72309de..63b54163b99 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -121,6 +121,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap243x_boards_compat,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 199a174e1ba..ec4018362e8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -396,6 +396,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap2_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 6434bdcd7ad..5949f6ae3ed 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -672,6 +672,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -682,6 +683,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index e75102a5eb0..13bde0e6693 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -434,6 +434,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 736861463b3..bebd3d84365 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -689,6 +689,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
 MACHINE_END
@@ -699,6 +700,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
 MACHINE_END
@@ -709,6 +711,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1843e141f3a..c34f5658828 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -559,6 +559,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 1653d181330..f11bc444e7b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -681,6 +681,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 1b2a7762162..5fa6bad9574 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -208,6 +208,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -217,6 +218,7 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 6297e814cdd..ef315c585b7 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -606,6 +606,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index ab226473dee..b21d70a2e4a 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -454,6 +454,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.map_io			= omap3_map_io,
 	.init_early		= omap35xx_init_early,
 	.init_irq		= omap3_init_irq,
+	.handle_irq		= omap3_intc_handle_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap3_secure_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2741a34630b..18cd340f9b7 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -381,6 +381,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 7722d4d97fb..b6f114436db 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,6 +30,7 @@
 #include <linux/wl12xx.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -576,6 +577,7 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_panda_init,
 	.timer		= &omap4_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 26c5cbb4f2b..60a61ea759b 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -562,6 +562,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 6ffb6405285..a79d49e3fe0 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -149,6 +149,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rm680_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 847731377af..4e3c0965edf 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -127,6 +127,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index bd58f920517..70e5b54a211 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -135,6 +135,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -145,6 +146,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 950b39d76e9..18c4d5d20fa 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -169,8 +169,6 @@ void omap3_intc_resume_idle(void);
 extern void __iomem *l2cache_base;
 #endif
 
-extern void __iomem *gic_dist_base_addr;
-
 extern void __init gic_init_irq(void);
 extern void omap_smc1(u32 fn, u32 arg);
 
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index feb90a10945..56964a0c4c7 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -10,146 +10,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
-#define	ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
 
 		.macro	disable_fiq
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
-		/*
-		 * Configure the interrupt base on the first interrupt.
-		 * See also omap_irq_base_init for setting omap_irq_base.
-		 */
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =omap_irq_base	@ irq base address
-		ldr	\base, [\base, #0]	@ irq base value
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		tst	\base, #0x100		@ gic address?
-		bne	4401f			@ found gic
-
-		/* Handle omap2 and omap3 */
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-
-		/*
-		 * ti816x has additional IRQ pending register. Checking this
-		 * register on omap2 & omap3 has no effect (read as 0).
-		 */
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-9998:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-		b	9999f
-
-		/* Handle omap4 */
-4401:		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-		ldr     \tmp, =1021
-		bic     \irqnr, \irqstat, #0x1c00
-		cmp     \irqnr, #15
-		cmpcc   \irqnr, \irqnr
-		cmpne   \irqnr, \tmp
-		cmpcs   \irqnr, \irqnr
-9999:
-		.endm
-
-#ifdef CONFIG_SMP
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt
-		 * on the controller, since this requires the original irqstat
-		 * value which we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		it	cc
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		it	cs
-		cmpcs	\irqnr, \irqnr
-		.endm
-#endif	/* CONFIG_SMP */
-
-#else	/* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		.macro  get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
-		ldr	\base, =OMAP2_IRQ_BASE
-#else
-		ldr	\base, =OMAP3_IRQ_BASE
-#endif
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
-		bne	9999f
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-#endif
-9999:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-		.endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr     \base, =OMAP4_IRQ_BASE
-		.endm
-
-#endif
-
-#endif	/* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 33f090ce022..8907c4ac176 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -316,9 +316,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
-/* See irq.c, omap4-common.c and entry-macro.S */
-void __iomem *omap_irq_base;
-
 static void __init omap_common_init_early(void)
 {
 	omap2_check_revision();
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 65f1be6a182..42b1d659191 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 
 
@@ -35,6 +36,11 @@
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG	32
 
+#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
+
 /*
  * OMAP2 has a number of different interrupt controllers, each interrupt
  * controller is identified as its own "bank". Register definitions are
@@ -143,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 
 static void __init omap_init_irq(u32 base, int nr_irqs)
 {
+	void __iomem *omap_irq_base;
 	unsigned long nr_of_irqs = 0;
 	unsigned int nr_banks = 0;
 	int i, j;
@@ -191,6 +198,44 @@ void __init ti816x_init_irq(void)
 	omap_init_irq(OMAP34XX_IC_BASE, 128);
 }
 
+static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
+{
+	u32 irqnr;
+
+	do {
+		irqnr = readl_relaxed(base_addr + 0x98);
+		if (irqnr)
+			goto out;
+
+		irqnr = readl_relaxed(base_addr + 0xb8);
+		if (irqnr)
+			goto out;
+
+		irqnr = readl_relaxed(base_addr + 0xd8);
+#ifdef CONFIG_SOC_OMAPTI816X
+		if (irqnr)
+			goto out;
+		irqnr = readl_relaxed(base_addr + 0xf8);
+#endif
+
+out:
+		if (!irqnr)
+			break;
+
+		irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
+		irqnr &= ACTIVEIRQ_MASK;
+
+		if (irqnr)
+			handle_IRQ(irqnr, regs);
+	} while (irqnr);
+}
+
+asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
+{
+	void __iomem *base_addr = OMAP2_IRQ_BASE;
+	omap_intc_handle_irq(base_addr, regs);
+}
+
 #ifdef CONFIG_ARCH_OMAP3
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 
@@ -263,4 +308,10 @@ void omap3_intc_resume_idle(void)
 	/* Re-enable autoidle */
 	intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
 }
+
+asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs)
+{
+	void __iomem *base_addr = OMAP3_IRQ_BASE;
+	omap_intc_handle_irq(base_addr, regs);
+}
 #endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index f327d7472ca..beecfdd56ea 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -29,11 +29,11 @@
 void __iomem *l2cache_base;
 #endif
 
-void __iomem *gic_dist_base_addr;
-
-
 void __init gic_init_irq(void)
 {
+	void __iomem *omap_irq_base;
+	void __iomem *gic_dist_base_addr;
+
 	/* Static mapping, never released */
 	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
 	BUG_ON(!gic_dist_base_addr);
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index 34d08347be5..ad871bd7b1a 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -11,6 +11,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
@@ -33,22 +34,20 @@ static const char *picoxcell_dt_match[] = {
 };
 
 static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,pl192-vic" },
+	{ .compatible = "arm,pl192-vic", .data = vic_of_init, },
 	{ /* Sentinel */ }
 };
 
 static void __init picoxcell_init_irq(void)
 {
-	vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
-	vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
-	irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
-	irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+	of_irq_init(vic_of_match);
 }
 
 DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
 	.map_io		= picoxcell_map_io,
 	.nr_irqs	= ARCH_NR_IRQS,
 	.init_irq	= picoxcell_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &picoxcell_timer,
 	.init_machine	= picoxcell_init_machine,
 	.dt_compat	= picoxcell_dt_match,
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
index 8f2c234ed9d..58d4ee3ae94 100644
--- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 
 #define UART_SHIFT 2
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
 		ldr	\rp, =PICOXCELL_UART1_BASE
 		.endm
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
index a6b09f75d9d..9b505ac00be 100644
--- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -9,11 +9,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
+	.macro  disable_fiq
+	.endm
 
-#define VA_VIC0		IO_ADDRESS(PICOXCELL_VIC0_BASE)
-#define VA_VIC1		IO_ADDRESS(PICOXCELL_VIC1_BASE)
-
-#include <asm/entry-macro-vic2.S>
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index a73bc86a3c2..260c0c17692 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -7,45 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-		mov	\tmp, \tmp, lsr #13
-		and	\tmp, \tmp, #0x7		@ Core G
-		cmp	\tmp, #1
-		bhi	1002f
-
-		@ Core Generation 1 (PXA25x)
-		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
-		add	\base, \base, #0x00d00000
-		ldr	\irqstat, [\base, #0]		@ ICIP
-		ldr	\irqnr, [\base, #4]		@ ICMR
-
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1001f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
-		b	1001f
-1002:
-		@ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
-		mrc	p6, 0, \irqstat, c5, c0, 0	@ ICHP
-		tst	\irqstat, #0x80000000
-		beq	1001f
-		bic	\irqstat, \irqstat, #0x80000000
-		mov	\irqnr, \irqstat, lsr #16
-		add	\irqnr, \irqnr, #(PXA_IRQ(0))
-1001:
-		.endm
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index 4071164aeba..e8a5179c265 100644
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -7,8 +7,6 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
 
 		.macro	disable_fiq
 		.endm
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 026c66ad7ec..10ef2e74cce 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -469,6 +469,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_eb_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_eb_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index c057540ec77..bd8fec8b20d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -392,6 +392,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb1176_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pb1176_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 671ad6d6ff0..fa73ba81a44 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -366,6 +366,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb11mp_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pb11mp_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index cbf22df4ad5..6e5f2b9ddb7 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -316,6 +316,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pba8_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pba8_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 63c4114afae..291bf1a8f2f 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -399,6 +399,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pbx_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pbx_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
index dd362604dcc..dc2bc15142c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -12,7 +12,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/map.h>
-#include <mach/irqs.h>
+		.macro  disable_fiq
+		.endm
 
-#include <asm/entry-macro-vic2.S>
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 8eba88e7209..2bbc14d9342 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -30,6 +30,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -236,6 +237,7 @@ MACHINE_START(ANW6410, "A&W6410")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= anw6410_map_io,
 	.init_machine	= anw6410_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index d04b6544851..988ac2e48f0 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -37,6 +37,7 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -711,6 +712,7 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
 	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 952f75ff5de..c5955f30170 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -267,6 +268,7 @@ MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 1bc85c35949..4415c85e3f6 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -24,6 +24,7 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -345,6 +346,7 @@ MACHINE_START(MINI6410, "MINI6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index cb13cba98b3..9b2c610eac2 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -25,6 +25,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -99,6 +100,7 @@ MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 87281e4b847..dbab49f2713 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -25,6 +25,7 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -326,6 +327,7 @@ MACHINE_START(REAL6410, "REAL6410")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= real6410_map_io,
 	.init_machine	= real6410_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 94c831d8836..05394528265 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -17,6 +17,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -148,6 +149,7 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index f112547ce80..a58d1ba5cba 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -17,6 +17,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -164,6 +165,7 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 73450c2b530..be28a59e3f5 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -22,6 +22,7 @@
 
 #include <asm/mach-types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -88,6 +89,7 @@ MACHINE_START(SMDK6400, "SMDK6400")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6400_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6400_map_io,
 	.init_machine	= smdk6400_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 8bc8edd85e5..08309155d08 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -43,6 +43,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -700,6 +701,7 @@ MACHINE_START(SMDK6410, "SMDK6410")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6410_map_io,
 	.init_machine	= smdk6410_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
index 10b62b4f821..fbb246d0a3d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -10,7 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <mach/map.h>
-#include <plat/irqs.h>
+		.macro  disable_fiq
+		.endm
 
-#include <asm/entry-macro-vic2.S>
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 4a1250cd135..c272c3f7d6d 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -27,6 +27,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -242,6 +243,7 @@ MACHINE_START(SMDK6440, "SMDK6440")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6440_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6440_map_io,
 	.init_machine	= smdk6440_machine_init,
 	.timer		= &s5p_timer,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 0ab129ecf00..7a470095961 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -27,6 +27,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -262,6 +263,7 @@ MACHINE_START(SMDK6450, "SMDK6450")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6450_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6450_map_io,
 	.init_machine	= smdk6450_machine_init,
 	.timer		= &s5p_timer,
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index ba76af052c8..b8c242edfa2 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -12,39 +12,14 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
 	.macro	disable_fiq
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
 	.endm
 
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S5P_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic2
-	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
 	.endm
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 26f5c91c942..93ebe3a92d1 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,6 +25,7 @@
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -250,6 +251,7 @@ MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pc100_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
index 3aa41ac59f0..bebca1b5d0b 100644
--- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -10,45 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
 	.macro	disable_fiq
 	.endm
 
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
-	.endm
-
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S5P_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic2
-	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic3
-	addeq	\tmp, \base, #(VA_VIC3 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 5811a96125f..71ca95604d6 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -22,6 +22,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -680,6 +681,7 @@ MACHINE_START(AQUILA, "Aquila")
 	   Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= aquila_map_io,
 	.init_machine	= aquila_machine_init,
 	.timer		= &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 15edcae448b..448fd9ea96f 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -956,6 +957,7 @@ MACHINE_START(GONI, "GONI")
 	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= goni_map_io,
 	.init_machine	= goni_machine_init,
 	.timer		= &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f7266bb0cac..c2531ffc720 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/sysdev.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -138,6 +139,7 @@ MACHINE_START(SMDKC110, "SMDKC110")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkc110_map_io,
 	.init_machine	= smdkc110_machine_init,
 	.timer		= &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index a9106c39239..4ca77c41d49 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -315,6 +316,7 @@ MACHINE_START(SMDKV210, "SMDKV210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkv210_map_io,
 	.init_machine	= smdkv210_machine_init,
 	.timer		= &s5p_timer,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 97cc066c536..df70fcb3451 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -127,6 +128,7 @@ MACHINE_START(TORBRECK, "TORBRECK")
 	/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= torbreck_map_io,
 	.init_machine	= torbreck_machine_init,
 	.timer		= &s5p_timer,
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2aec2f73251..5ca1f9d6699 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o pm_runtime.o
+obj-y				:= timer.o console.o clock.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
@@ -28,7 +28,6 @@ pfc-$(CONFIG_ARCH_SH73A0)	+= pfc-sh73a0.o
 obj-$(CONFIG_ARCH_SH7367)	+= entry-intc.o
 obj-$(CONFIG_ARCH_SH7377)	+= entry-intc.o
 obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
-obj-$(CONFIG_ARCH_SH73A0)	+= entry-gic.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 83624e26b88..202c3c6ec9d 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -515,14 +515,14 @@ static void __init ag5evm_init(void)
 	/* enable MMCIF */
 	gpio_request(GPIO_FN_MMCCLK0, NULL);
 	gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_0, NULL);
-	gpio_request(GPIO_FN_MMCD0_1, NULL);
-	gpio_request(GPIO_FN_MMCD0_2, NULL);
-	gpio_request(GPIO_FN_MMCD0_3, NULL);
-	gpio_request(GPIO_FN_MMCD0_4, NULL);
-	gpio_request(GPIO_FN_MMCD0_5, NULL);
-	gpio_request(GPIO_FN_MMCD0_6, NULL);
-	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
 	gpio_request(GPIO_PORT208, NULL); /* Reset */
 	gpio_direction_output(GPIO_PORT208, 1);
 
@@ -608,7 +608,7 @@ struct sys_timer ag5evm_timer = {
 MACHINE_START(AG5EVM, "ag5evm")
 	.map_io		= ag5evm_map_io,
 	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= shmobile_handle_irq_gic,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= ag5evm_init,
 	.timer		= &ag5evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index a3aa0f6df96..4c865ece9ac 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -201,7 +201,7 @@ static struct physmap_flash_data nor_flash_data = {
 static struct resource nor_flash_resources[] = {
 	[0]	= {
 		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */		
+		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
 		.flags	= IORESOURCE_MEM,
 	}
 };
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index adc73122bf2..1b4439d3f9d 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -48,6 +48,7 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
+/* SMSC 9220 */
 static struct resource smsc9220_resources[] = {
 	[0] = {
 		.start		= 0x14000000, /* CS5A */
@@ -77,6 +78,7 @@ static struct platform_device eth_device = {
 	.num_resources	= ARRAY_SIZE(smsc9220_resources),
 };
 
+/* KEYSC */
 static struct sh_keysc_info keysc_platdata = {
 	.mode		= SH_KEYSC_MODE_6,
 	.scan_timing	= 3,
@@ -120,6 +122,7 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* GPIO KEY */
 #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
 static struct gpio_keys_button gpio_buttons[] = {
@@ -150,6 +153,7 @@ static struct platform_device gpio_keys_device = {
 	},
 };
 
+/* GPIO LED */
 #define GPIO_LED(n, g) { .name = n, .gpio = g }
 
 static struct gpio_led gpio_leds[] = {
@@ -175,6 +179,7 @@ static struct platform_device gpio_leds_device = {
 	},
 };
 
+/* MMCIF */
 static struct resource mmcif_resources[] = {
 	[0] = {
 		.name   = "MMCIF",
@@ -207,6 +212,7 @@ static struct platform_device mmcif_device = {
 	.resource       = mmcif_resources,
 };
 
+/* SDHI0 */
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
 	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
@@ -243,6 +249,7 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
+/* SDHI1 */
 static struct sh_mobile_sdhi_info sdhi1_info = {
 	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
@@ -441,7 +448,7 @@ struct sys_timer kota2_timer = {
 MACHINE_START(KOTA2, "kota2")
 	.map_io		= kota2_map_io,
 	.init_irq	= kota2_init_irq,
-	.handle_irq	= shmobile_handle_irq_gic,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= kota2_init,
 	.timer		= &kota2_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 66975921e64..995a9c3aec8 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -476,7 +476,7 @@ static struct clk_ops fsidiv_clk_ops = {
 	.disable	= fsidiv_disable,
 };
 
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+static struct clk_mapping fsidiva_clk_mapping = {
 	.phys	= FSIDIVA,
 	.len	= 8,
 };
@@ -484,10 +484,10 @@ static struct clk_mapping sh7372_fsidiva_clk_mapping = {
 struct clk sh7372_fsidiva_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
-	.mapping	= &sh7372_fsidiva_clk_mapping,
+	.mapping	= &fsidiva_clk_mapping,
 };
 
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+static struct clk_mapping fsidivb_clk_mapping = {
 	.phys	= FSIDIVB,
 	.len	= 8,
 };
@@ -495,7 +495,7 @@ static struct clk_mapping sh7372_fsidivb_clk_mapping = {
 struct clk sh7372_fsidivb_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
-	.mapping	= &sh7372_fsidivb_clk_mapping,
+	.mapping	= &fsidivb_clk_mapping,
 };
 
 static struct clk *late_main_clks[] = {
diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c
index 2e44f11f592..1b2334277e8 100644
--- a/arch/arm/mach-shmobile/cpuidle.c
+++ b/arch/arm/mach-shmobile/cpuidle.c
@@ -26,65 +26,59 @@ void (*shmobile_cpuidle_modes[CPUIDLE_STATE_MAX])(void) = {
 };
 
 static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
-				  struct cpuidle_state *state)
+				  struct cpuidle_driver *drv,
+				  int index)
 {
 	ktime_t before, after;
-	int requested_state = state - &dev->states[0];
 
-	dev->last_state = &dev->states[requested_state];
 	before = ktime_get();
 
 	local_irq_disable();
 	local_fiq_disable();
 
-	shmobile_cpuidle_modes[requested_state]();
+	shmobile_cpuidle_modes[index]();
 
 	local_irq_enable();
 	local_fiq_enable();
 
 	after = ktime_get();
-	return ktime_to_ns(ktime_sub(after, before)) >> 10;
+	dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+	return index;
 }
 
 static struct cpuidle_device shmobile_cpuidle_dev;
 static struct cpuidle_driver shmobile_cpuidle_driver = {
 	.name =		"shmobile_cpuidle",
 	.owner =	THIS_MODULE,
+	.states[0] = {
+		.name = "C1",
+		.desc = "WFI",
+		.exit_latency = 1,
+		.target_residency = 1 * 2,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+	},
+	.safe_state_index = 0, /* C1 */
+	.state_count = 1,
 };
 
-void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 static int shmobile_cpuidle_init(void)
 {
 	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-	struct cpuidle_state *state;
+	struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
 	int i;
 
-	cpuidle_register_driver(&shmobile_cpuidle_driver);
-
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		dev->states[i].name[0] = '\0';
-		dev->states[i].desc[0] = '\0';
-		dev->states[i].enter = shmobile_cpuidle_enter;
-	}
-
-	i = CPUIDLE_DRIVER_STATE_START;
-
-	state = &dev->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
-	strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
-	state->exit_latency = 1;
-	state->target_residency = 1 * 2;
-	state->power_usage = 3;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-
-	dev->safe_state = state;
-	dev->state_count = i;
+	for (i = 0; i < CPUIDLE_STATE_MAX; i++)
+		drv->states[i].enter = shmobile_cpuidle_enter;
 
 	if (shmobile_cpuidle_setup)
-		shmobile_cpuidle_setup(dev);
+		shmobile_cpuidle_setup(drv);
+
+	cpuidle_register_driver(drv);
 
+	dev->state_count = drv->state_count;
 	cpuidle_register_device(dev);
 
 	return 0;
diff --git a/arch/arm/mach-shmobile/entry-gic.S b/arch/arm/mach-shmobile/entry-gic.S
deleted file mode 100644
index e20239b08c8..00000000000
--- a/arch/arm/mach-shmobile/entry-gic.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * ARM Interrupt demux handler using GIC
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2011 Paul Mundt
- * Copyright (C) 2010 - 2011 Renesas Solutions Corp.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/assembler.h>
-#include <asm/entry-macro-multi.S>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/entry-macro-gic.S>
-
-	arch_irq_handler shmobile_handle_irq_gic
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c0cdbf997c9..4bf82c15677 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -7,11 +7,10 @@ extern void shmobile_secondary_vector(void);
 struct clk;
 extern int clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
-extern void shmobile_handle_irq_gic(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_device;
+struct cpuidle_driver;
 extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index 8d4a416d428..2a57b2964ee 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -18,14 +18,5 @@
 	.macro  disable_fiq
 	.endm
 
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	.endm
-
-	.macro  test_for_ipi, irqnr, irqstat, base, tmp
-	.endm
-
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 18ae6a990bc..881d515a968 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -470,6 +470,14 @@ enum {
 	GPIO_FN_SDHICMD2_PU,
 	GPIO_FN_MMCCMD0_PU,
 	GPIO_FN_MMCCMD1_PU,
+	GPIO_FN_MMCD0_0_PU,
+	GPIO_FN_MMCD0_1_PU,
+	GPIO_FN_MMCD0_2_PU,
+	GPIO_FN_MMCD0_3_PU,
+	GPIO_FN_MMCD0_4_PU,
+	GPIO_FN_MMCD0_5_PU,
+	GPIO_FN_MMCD0_6_PU,
+	GPIO_FN_MMCD0_7_PU,
 	GPIO_FN_FSIACK_PU,
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index 128555e76e4..e6e524654e6 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -21,68 +21,49 @@
 #include <linux/gpio.h>
 #include <mach/sh7367.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _273(fn, pfx, sfx)		\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),	\
-	_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_273(str) _273(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx),	\
+	PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
-	PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
-	PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
-	PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
-	PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
-	PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
-	PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
-	PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
-	PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
-	PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
 
 	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
 	PINMUX_FUNCTION_END,
@@ -327,41 +308,6 @@ enum {
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
@@ -1098,13 +1044,9 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 49-1 -> 49-6 (GPIO) */
-	GPIO_PORT_273(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
@@ -1345,22 +1287,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(DIVLOCK),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 9c265dae138..1bd6585a6ac 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -25,27 +25,13 @@
 #include <linux/gpio.h>
 #include <mach/sh7372.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _80(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx),	_10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx),	_10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx),	_10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx),	_10(fn, pfx##8, sfx)
-
-#define _190(fn, pfx, sfx) \
-	_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
-	_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_ALL(str) _190(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx), \
+	PORT_10(fn, pfx##10, sfx),	PORT_10(fn, pfx##11, sfx), \
+	PORT_10(fn, pfx##12, sfx),	PORT_10(fn, pfx##13, sfx), \
+	PORT_10(fn, pfx##14, sfx),	PORT_10(fn, pfx##15, sfx), \
+	PORT_10(fn, pfx##16, sfx),	PORT_10(fn, pfx##17, sfx), \
+	PORT_10(fn, pfx##18, sfx),	PORT_1(fn, pfx##190, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
@@ -381,108 +367,124 @@ enum {
 	PINMUX_MARK_END,
 };
 
-/* PORT_DATA_I_PD(nr) */
-#define _I___D(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_I_PU(nr) */
-#define _I__U_(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_I_PU_PD(nr) */
-#define _I__UD(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* PORT_DATA_O(nr) */
-#define __O___(nr)							\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-/* PORT_DATA_IO(nr) */
-#define _IO___(nr)				     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-/* PORT_DATA_IO_PD(nr) */
-#define _IO__D(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_IO_PU(nr) */
-#define _IO_U_(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_IO_PU_PD(nr) */
-#define _IO_UD(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
-
-	_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
-	_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
-
-	__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
-	__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
-
-	_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
-	_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
-
-	_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
-	_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
-
-	_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
-	_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
-
-	_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
-	_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
-
-	_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
-	_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
-
-	_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
-	_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
-
-	_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
-	_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
-
-	_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
-	_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
-
-	_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
-	_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
-
-	_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
-	_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
-
-	_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
-	_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
-
-	_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
-	_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
-
-	_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
-	_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
-
-	_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
-	_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
-
-	__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
-	_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
-
-	_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
-	_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
-
-	_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
-	__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
-
-	_IO_UD(190),
+	PORT_DATA_IO_PD(0),		PORT_DATA_IO_PD(1),
+	PORT_DATA_O(2),			PORT_DATA_I_PD(3),
+	PORT_DATA_I_PD(4),		PORT_DATA_I_PD(5),
+	PORT_DATA_IO_PU_PD(6),		PORT_DATA_I_PD(7),
+	PORT_DATA_IO_PD(8),		PORT_DATA_O(9),
+
+	PORT_DATA_O(10),		PORT_DATA_O(11),
+	PORT_DATA_IO_PU_PD(12),		PORT_DATA_IO_PD(13),
+	PORT_DATA_IO_PD(14),		PORT_DATA_O(15),
+	PORT_DATA_IO_PD(16),		PORT_DATA_IO_PD(17),
+	PORT_DATA_I_PD(18),		PORT_DATA_IO(19),
+
+	PORT_DATA_IO(20),		PORT_DATA_IO(21),
+	PORT_DATA_IO(22),		PORT_DATA_IO(23),
+	PORT_DATA_IO(24),		PORT_DATA_IO(25),
+	PORT_DATA_IO(26),		PORT_DATA_IO(27),
+	PORT_DATA_IO(28),		PORT_DATA_IO(29),
+
+	PORT_DATA_IO(30),		PORT_DATA_IO(31),
+	PORT_DATA_IO(32),		PORT_DATA_IO(33),
+	PORT_DATA_IO(34),		PORT_DATA_IO(35),
+	PORT_DATA_IO(36),		PORT_DATA_IO(37),
+	PORT_DATA_IO(38),		PORT_DATA_IO(39),
+
+	PORT_DATA_IO(40),		PORT_DATA_IO(41),
+	PORT_DATA_IO(42),		PORT_DATA_IO(43),
+	PORT_DATA_IO(44),		PORT_DATA_IO(45),
+	PORT_DATA_IO_PU(46),		PORT_DATA_IO_PU(47),
+	PORT_DATA_IO_PU(48),		PORT_DATA_IO_PU(49),
+
+	PORT_DATA_IO_PU(50),		PORT_DATA_IO_PU(51),
+	PORT_DATA_IO_PU(52),		PORT_DATA_IO_PU(53),
+	PORT_DATA_IO_PU(54),		PORT_DATA_IO_PU(55),
+	PORT_DATA_IO_PU(56),		PORT_DATA_IO_PU(57),
+	PORT_DATA_IO_PU(58),		PORT_DATA_IO_PU(59),
+
+	PORT_DATA_IO_PU(60),		PORT_DATA_IO_PU(61),
+	PORT_DATA_IO(62),		PORT_DATA_O(63),
+	PORT_DATA_O(64),		PORT_DATA_IO_PU(65),
+	PORT_DATA_O(66),		PORT_DATA_IO_PU(67),  /*66?*/
+	PORT_DATA_O(68),		PORT_DATA_IO(69),
+
+	PORT_DATA_IO(70),		PORT_DATA_IO(71),
+	PORT_DATA_O(72),		PORT_DATA_I_PU(73),
+	PORT_DATA_I_PU_PD(74),		PORT_DATA_IO_PU_PD(75),
+	PORT_DATA_IO_PU_PD(76),		PORT_DATA_IO_PU_PD(77),
+	PORT_DATA_IO_PU_PD(78),		PORT_DATA_IO_PU_PD(79),
+
+	PORT_DATA_IO_PU_PD(80),		PORT_DATA_IO_PU_PD(81),
+	PORT_DATA_IO_PU_PD(82),		PORT_DATA_IO_PU_PD(83),
+	PORT_DATA_IO_PU_PD(84),		PORT_DATA_IO_PU_PD(85),
+	PORT_DATA_IO_PU_PD(86),		PORT_DATA_IO_PU_PD(87),
+	PORT_DATA_IO_PU_PD(88),		PORT_DATA_IO_PU_PD(89),
+
+	PORT_DATA_IO_PU_PD(90),		PORT_DATA_IO_PU_PD(91),
+	PORT_DATA_IO_PU_PD(92),		PORT_DATA_IO_PU_PD(93),
+	PORT_DATA_IO_PU_PD(94),		PORT_DATA_IO_PU_PD(95),
+	PORT_DATA_IO_PU(96),		PORT_DATA_IO_PU_PD(97),
+	PORT_DATA_IO_PU_PD(98),		PORT_DATA_O(99), /*99?*/
+
+	PORT_DATA_IO_PD(100),		PORT_DATA_IO_PD(101),
+	PORT_DATA_IO_PD(102),		PORT_DATA_IO_PD(103),
+	PORT_DATA_IO_PD(104),		PORT_DATA_IO_PD(105),
+	PORT_DATA_IO_PU(106),		PORT_DATA_IO_PU(107),
+	PORT_DATA_IO_PU(108),		PORT_DATA_IO_PU(109),
+
+	PORT_DATA_IO_PU(110),		PORT_DATA_IO_PU(111),
+	PORT_DATA_IO_PD(112),		PORT_DATA_IO_PD(113),
+	PORT_DATA_IO_PU(114),		PORT_DATA_IO_PU(115),
+	PORT_DATA_IO_PU(116),		PORT_DATA_IO_PU(117),
+	PORT_DATA_IO_PU(118),		PORT_DATA_IO_PU(119),
+
+	PORT_DATA_IO_PU(120),		PORT_DATA_IO_PD(121),
+	PORT_DATA_IO_PD(122),		PORT_DATA_IO_PD(123),
+	PORT_DATA_IO_PD(124),		PORT_DATA_IO_PD(125),
+	PORT_DATA_IO_PD(126),		PORT_DATA_IO_PD(127),
+	PORT_DATA_IO_PD(128),		PORT_DATA_IO_PU_PD(129),
+
+	PORT_DATA_IO_PU_PD(130),	PORT_DATA_IO_PU_PD(131),
+	PORT_DATA_IO_PU_PD(132),	PORT_DATA_IO_PU_PD(133),
+	PORT_DATA_IO_PU_PD(134),	PORT_DATA_IO_PU_PD(135),
+	PORT_DATA_IO_PD(136),		PORT_DATA_IO_PD(137),
+	PORT_DATA_IO_PD(138),		PORT_DATA_IO_PD(139),
+
+	PORT_DATA_IO_PD(140),		PORT_DATA_IO_PD(141),
+	PORT_DATA_IO_PD(142),		PORT_DATA_IO_PU_PD(143),
+	PORT_DATA_IO_PD(144),		PORT_DATA_IO_PD(145),
+	PORT_DATA_IO_PD(146),		PORT_DATA_IO_PD(147),
+	PORT_DATA_IO_PD(148),		PORT_DATA_IO_PD(149),
+
+	PORT_DATA_IO_PD(150),		PORT_DATA_IO_PD(151),
+	PORT_DATA_IO_PU_PD(152),	PORT_DATA_I_PD(153),
+	PORT_DATA_IO_PU_PD(154),	PORT_DATA_I_PD(155),
+	PORT_DATA_IO_PD(156),		PORT_DATA_IO_PD(157),
+	PORT_DATA_I_PD(158),		PORT_DATA_IO_PD(159),
+
+	PORT_DATA_O(160),		PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162),		PORT_DATA_IO_PD(163),
+	PORT_DATA_I_PD(164),		PORT_DATA_IO_PD(165),
+	PORT_DATA_I_PD(166),		PORT_DATA_I_PD(167),
+	PORT_DATA_I_PD(168),		PORT_DATA_I_PD(169),
+
+	PORT_DATA_I_PD(170),		PORT_DATA_O(171),
+	PORT_DATA_IO_PU_PD(172),	PORT_DATA_IO_PU_PD(173),
+	PORT_DATA_IO_PU_PD(174),	PORT_DATA_IO_PU_PD(175),
+	PORT_DATA_IO_PU_PD(176),	PORT_DATA_IO_PU_PD(177),
+	PORT_DATA_IO_PU_PD(178),	PORT_DATA_O(179),
+
+	PORT_DATA_IO_PU_PD(180),	PORT_DATA_IO_PU_PD(181),
+	PORT_DATA_IO_PU_PD(182),	PORT_DATA_IO_PU_PD(183),
+	PORT_DATA_IO_PU_PD(184),	PORT_DATA_O(185),
+	PORT_DATA_IO_PU_PD(186),	PORT_DATA_IO_PU_PD(187),
+	PORT_DATA_IO_PU_PD(188),	PORT_DATA_IO_PU_PD(189),
+
+	PORT_DATA_IO_PU_PD(190),
 
 	/* IRQ */
 	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
@@ -926,10 +928,6 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 
 	/* PORT */
@@ -1201,22 +1199,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(SDENC_DV_CLKI),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0,	0xE6051000), /* PORT0CR */
 	PORTCR(1,	0xE6051001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index 613e6842ad0..2f10511946a 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -22,84 +22,65 @@
 #include <linux/gpio.h>
 #include <mach/sh7377.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _265(fn, pfx, sfx)				\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),	\
-	_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),	\
-	_1(fn, pfx##264, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_265(str) _265(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx),	\
+	PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx),	\
+	PORT_1(fn, pfx##264, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
-	PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
-	PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
-	PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
-	PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
-	PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
-	PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
-	PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
-	PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
-	PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
 
 	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
 	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
@@ -360,45 +341,6 @@ enum {
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 	/* 55-1 (GPIO) */
@@ -1078,13 +1020,9 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 55-1 -> 55-5 (GPIO) */
-	GPIO_PORT_265(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
@@ -1362,23 +1300,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(RESETOUTS),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)	\
-	0, (out), (in), 0,	\
-		0, 0, 0, 0,	\
-		0, 0, (in_pd), 0,	\
-		0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {	\
-			PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				 PORT##nr##_IN_PU, PORT##nr##_OUT),	\
-				PORT##nr##_FN0, PORT##nr##_FN1,	\
-				PORT##nr##_FN2, PORT##nr##_FN3,	\
-				PORT##nr##_FN4, PORT##nr##_FN5,	\
-				PORT##nr##_FN6, PORT##nr##_FN7 }	\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index 5abe02fbd6b..e05634ce2e0 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -24,83 +24,71 @@
 #include <mach/sh73a0.h>
 #include <mach/irqs.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _310(fn, pfx, sfx)				\
-	_10(fn, pfx,    sfx), _10(fn, pfx##1, sfx),	\
-	_10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx),	\
-	_10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx),	\
-	_10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx),	\
-	_10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx),	\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx),	\
-	_1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx),	\
-	_1(fn, pfx##282, sfx),				\
-	_1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx),	\
-	_10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_310(str) _310(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx,    sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx),	\
+	PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx),	\
+	PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx),	\
+	PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx),	\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx),	\
+	PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx),	\
+	PORT_1(fn, pfx##282, sfx),				\
+	PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx),	\
+	PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_310(DATA),			/* PORT0_DATA -> PORT309_DATA */
+	PORT_ALL(DATA),			/* PORT0_DATA -> PORT309_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_310(IN),			/* PORT0_IN -> PORT309_IN */
+	PORT_ALL(IN),			/* PORT0_IN -> PORT309_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_310(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
+	PORT_ALL(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_310(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
+	PORT_ALL(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_310(OUT),			/* PORT0_OUT -> PORT309_OUT */
+	PORT_ALL(OUT),			/* PORT0_OUT -> PORT309_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_310(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
-	PORT_310(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
-	PORT_310(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
-	PORT_310(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
-	PORT_310(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
-	PORT_310(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
-	PORT_310(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
-	PORT_310(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
-	PORT_310(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
-	PORT_310(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
+	PORT_ALL(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
+	PORT_ALL(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
+	PORT_ALL(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
+	PORT_ALL(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
+	PORT_ALL(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
+	PORT_ALL(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
+	PORT_ALL(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
+	PORT_ALL(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
+	PORT_ALL(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
+	PORT_ALL(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
 
 	MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
 	MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
@@ -508,6 +496,14 @@ enum {
 	SDHICMD2_PU_MARK,
 	MMCCMD0_PU_MARK,
 	MMCCMD1_PU_MARK,
+	MMCD0_0_PU_MARK,
+	MMCD0_1_PU_MARK,
+	MMCD0_2_PU_MARK,
+	MMCD0_3_PU_MARK,
+	MMCD0_4_PU_MARK,
+	MMCD0_5_PU_MARK,
+	MMCD0_6_PU_MARK,
+	MMCD0_7_PU_MARK,
 	FSIBISLD_PU_MARK,
 	FSIACK_PU_MARK,
 	FSIAILR_PU_MARK,
@@ -517,45 +513,6 @@ enum {
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 
@@ -1561,6 +1518,24 @@ static pinmux_enum_t pinmux_data[] = {
 		MSEL4CR_MSEL15_0),
 	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
 		MSEL4CR_MSEL15_1),
+
+	PINMUX_DATA(MMCD0_0_PU_MARK,
+		    PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_PU_MARK,
+		    PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_PU_MARK,
+		    PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_PU_MARK,
+		    PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_PU_MARK,
+		    PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_5_PU_MARK,
+		    PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_6_PU_MARK,
+		    PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_7_PU_MARK,
+		    PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
 	PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
 	PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
 	PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
@@ -1568,12 +1543,8 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
-	GPIO_PORT_310(),
+	GPIO_PORT_ALL(),
 
 	/* Table 25-1 (Functions 0-7) */
 	GPIO_FN(VBUS_0),
@@ -2236,24 +2207,20 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(SDHICMD2_PU),
 	GPIO_FN(MMCCMD0_PU),
 	GPIO_FN(MMCCMD1_PU),
+	GPIO_FN(MMCD0_0_PU),
+	GPIO_FN(MMCD0_1_PU),
+	GPIO_FN(MMCD0_2_PU),
+	GPIO_FN(MMCD0_3_PU),
+	GPIO_FN(MMCD0_4_PU),
+	GPIO_FN(MMCD0_5_PU),
+	GPIO_FN(MMCD0_6_PU),
+	GPIO_FN(MMCD0_7_PU),
 	GPIO_FN(FSIACK_PU),
 	GPIO_FN(FSIAILR_PU),
 	GPIO_FN(FSIAIBT_PU),
 	GPIO_FN(FSIAISLD_PU),
 };
 
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
-		0, \
-		/*0001*/ PORT##nr##_OUT , \
-		/*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
-		/*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
-		/*1110*/ PORT##nr##_IN_PU, 0, \
-		PORT##nr##_FN0, PORT##nr##_FN1,	PORT##nr##_FN2, \
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5, \
-		PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 79612737c5b..0a5b22942fd 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -402,22 +402,18 @@ static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2)
 
 #ifdef CONFIG_CPU_IDLE
 
-static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
+static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
 {
-	struct cpuidle_state *state;
-	int i = dev->state_count;
+	struct cpuidle_state *state = &drv->states[drv->state_count];
 
-	state = &dev->states[i];
 	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
 	strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
 	state->exit_latency = 10;
 	state->target_residency = 20 + 10;
-	state->power_usage = 1; /* perhaps not */
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
+	state->flags = CPUIDLE_FLAG_TIME_VALID;
+	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
 
-	dev->state_count = i + 1;
+	drv->state_count++;
 }
 
 static void sh7372_cpuidle_init(void)
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
deleted file mode 100644
index bd5c6a3b8c5..00000000000
--- a/arch/arm/mach-shmobile/pm_runtime.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-shmobile/pm_runtime.c
- *
- * Runtime PM support code for SuperH Mobile ARM
- *
- *  Copyright (C) 2009-2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_domain.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-
-#ifdef CONFIG_PM_RUNTIME
-
-static int default_platform_runtime_idle(struct device *dev)
-{
-	/* suspend synchronously to disable clocks immediately */
-	return pm_runtime_suspend(dev);
-}
-
-static struct dev_pm_domain default_pm_domain = {
-	.ops = {
-		.runtime_suspend = pm_clk_suspend,
-		.runtime_resume = pm_clk_resume,
-		.runtime_idle = default_platform_runtime_idle,
-		USE_PLATFORM_PM_SLEEP_OPS
-	},
-};
-
-#define DEFAULT_PM_DOMAIN_PTR	(&default_pm_domain)
-
-#else
-
-#define DEFAULT_PM_DOMAIN_PTR	NULL
-
-#endif /* CONFIG_PM_RUNTIME */
-
-static struct pm_clk_notifier_block platform_bus_notifier = {
-	.pm_domain = DEFAULT_PM_DOMAIN_PTR,
-	.con_ids = { NULL, },
-};
-
-static int __init sh_pm_runtime_init(void)
-{
-	pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
-	return 0;
-}
-core_initcall(sh_pm_runtime_init);
-
-static int __init sh_pm_runtime_late_init(void)
-{
-	pm_genpd_poweroff_unused();
-	return 0;
-}
-late_initcall(sh_pm_runtime_late_init);
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
index 53da4224ba3..de3bb41c8e9 100644
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -11,35 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro	arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =VA_SPEAR3XX_ML1_VIC_BASE
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
-		teq	\irqstat, #0
-		beq	1001f				@ this will set/reset
-							@ zero register
-		/*
-		 * Following code will find bit position of least significang
-		 * bit set in irqstat, using following equation
-		 * least significant bit set in n = (n & ~(n-1))
-		 */
-		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
-		mvn	\tmp, \tmp			@ tmp = ~tmp
-		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
-		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
-		clz	\tmp, \irqstat			@ tmp = leading zeros
-		rsb	\irqnr, \tmp, #0x1F		@ irqnr = 32 - tmp - 1
-
-1001:		/* EQ will be set if no irqs pending */
-		.endm
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index a5ff98eed1d..61068ba6792 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -67,6 +68,7 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear300_evb_init,
 MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index 45d180d5936..7903abe92bf 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -73,6 +74,7 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear310_evb_init,
 MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index 22879848d73..e9751f97093 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -71,6 +72,7 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear320_evb_init,
 MACHINE_END
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
index 8a0b0ed7b20..d490a910d92 100644
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -11,44 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro	arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
-		mov	\irqnr, #0
-		teq	\irqstat, #0
-		bne	1001f
-		ldr	\base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
-		teq	\irqstat, #0
-		beq	1002f				@ this will set/reset
-							@ zero register
-		mov	\irqnr, #32
-1001:
-		/*
-		 * Following code will find bit position of least significang
-		 * bit set in irqstat, using following equation
-		 * least significant bit set in n = (n & ~(n-1))
-		 */
-		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
-		mvn	\tmp, \tmp			@ tmp = ~tmp
-		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
-		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
-		clz	\tmp, \irqstat			@ tmp = leading zeros
-
-		rsb	\tmp, \tmp, #0x1F		@ tmp = 32 - tmp - 1
-		add	\irqnr, \irqnr, \tmp
-
-1002:		/* EQ will be set if no irqs pending */
-		.endm
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index 8238fe38e71..ff139ed0a61 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -46,6 +47,7 @@ MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear6xx_map_io,
 	.init_irq	=	spear6xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear6xx_timer,
 	.init_machine	=	spear600_evb_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index d368f8dafcf..f6f03ce340f 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -32,6 +32,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-tegra.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -101,6 +102,13 @@ static void __init tegra_dt_init(void)
 
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
+	/*
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
+	 */
+	of_platform_populate(NULL, tegra_dt_match_table,
+				tegra20_auxdata_lookup, NULL);
+
 	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
 		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
 			pinmux_configs[i].init();
@@ -110,12 +118,6 @@ static void __init tegra_dt_init(void)
 
 	WARN(i == ARRAY_SIZE(pinmux_configs),
 		"Unknown platform! Pinmuxing not initialized\n");
-
-	/*
-	 * Finished with the static registrations now; fill in the missing
-	 * devices
-	 */
-	of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
 }
 
 static const char * tegra_dt_board_compat[] = {
@@ -129,6 +131,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq	= tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
 	.dt_compat	= tegra_dt_board_compat,
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index e99b45618cd..7a4a26d5174 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -161,7 +163,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void harmony_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index f0bdc5e3fe5..fd190a8dc66 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
 #include <asm/setup.h>
 
 #include <mach/tegra_wm8903_pdata.h>
@@ -187,6 +188,7 @@ MACHINE_START(HARMONY, "harmony")
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_harmony_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index fb20894862b..be30e215f4b 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -158,7 +160,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void paz00_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 55c55ba89f1..0b7e1cfee70 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -29,6 +29,7 @@
 #include <linux/gpio.h>
 #include <linux/rfkill-gpio.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -190,6 +191,7 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_paz00_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index fbce31daa3c..b1c2972f62f 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 #include <mach/pinmux-t2.h>
@@ -191,6 +192,7 @@ static struct tegra_gpio_table common_gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
 	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
 	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
+	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true },
 	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
 	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
 	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
@@ -218,7 +220,9 @@ static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
 
 void __init seaboard_common_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index bf13ea355ef..7328379b135 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -34,6 +34,7 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 
 #include "board.h"
 #include "board-seaboard.h"
@@ -284,6 +285,7 @@ MACHINE_START(SEABOARD, "seaboard")
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_seaboard_init,
 MACHINE_END
@@ -293,6 +295,7 @@ MACHINE_START(KAEN, "kaen")
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_kaen_init,
 MACHINE_END
@@ -302,6 +305,7 @@ MACHINE_START(WARIO, "wario")
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_wario_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 4969dd28a04..7ab719d46da 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -16,6 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 
@@ -157,7 +158,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void __init trimslice_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 	tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
 }
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 1a6617b7806..60a36a2e0be 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
@@ -176,6 +177,7 @@ MACHINE_START(TRIMSLICE, "trimslice")
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_trimslice_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
index dd165c53889..ac11262149c 100644
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -12,30 +12,15 @@
  * GNU General Public License for more details.
  *
  */
-#include <mach/iomap.h>
-#include <mach/io.h>
-
-#if defined(CONFIG_ARM_GIC)
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-	/* Uses the GIC interrupt controller built into the cpu */
-#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
 
 	.macro	disable_fiq
 	.endm
 
-	.macro	get_irqnr_preamble, base, tmp
-	movw \base, #(ICTRL_BASE & 0x0000ffff)
-	movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
+	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-#else
+#if !defined(CONFIG_ARM_GIC)
 	/* legacy interrupt controller for AP16 */
-	.macro	disable_fiq
-	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
 	@ enable imprecise aborts
@@ -46,9 +31,6 @@
 	orr \base, #0x0000f000
 	.endm
 
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 	ldr \irqnr, [\base, #0x20]	@ EVT_IRQ_STS
 	cmp \irqnr, #0x80
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
index 20731ae39d3..7181d6ac665 100644
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -8,33 +8,9 @@
  * Low-level IRQ helper macros for ST-Ericsson U300
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
 
 	.macro	disable_fiq
 	.endm
 
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
-	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
-	mov	\irqnr, #0
-	teq	\irqstat, #0
-	bne	1002f
-1001:	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
-	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
-	mov	\irqnr, #32
-	teq	\irqstat, #0
-	beq	1003f
-1002:	tst	\irqstat, #1
-	bne	1003f
-	add	\irqnr, \irqnr, #1
-	movs	\irqstat, \irqstat, lsr #1
-	bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-	.endm
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 89422ee7f3a..4a4fd334eb6 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/memory.h>
@@ -49,6 +50,7 @@ MACHINE_START(U300, MACH_U300_STRING)
 	.atag_offset	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
 	.init_irq	= u300_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &u300_timer,
 	.init_machine	= u300_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bdd7b80dd7a..de1f5f8f733 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -33,6 +33,7 @@
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
@@ -695,6 +696,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= mop500_init_machine,
 MACHINE_END
 
@@ -703,6 +705,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= hrefv60_init_machine,
 MACHINE_END
 
@@ -712,5 +715,6 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= snowball_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 82025ba70c0..fe1569b67c9 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -12,6 +12,7 @@
 #include <linux/i2c.h>
 #include <linux/mfd/ab5500/ab5500.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -149,5 +150,6 @@ MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= u5500_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index 071bba94f72..e16299e1020 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -10,8 +10,6 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
 
 		.macro	disable_fiq
 		.endm
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
index e6f7c166316..b6f0dbf122e 100644
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -7,39 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
-		mov	\irqnr, #0
-		teq	\irqstat, #0
-		beq	1003f
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-
-@		clz	\irqnr, \irqstat
-@1003:		/* EQ will be set if we reach MAXIRQNUM */
-		.endm
-
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index fda4866703c..c83a1f379f7 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -27,6 +27,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -39,6 +40,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &versatile_timer,
 	.init_machine	= versatile_init,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 54e037c090f..f4d1e0f072c 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -45,6 +46,7 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &versatile_timer,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index feaf9cbe60f..4d31eeb6c10 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -107,6 +108,7 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &versatile_timer,
 	.init_machine	= versatile_pb_init,
 MACHINE_END
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
index 73c11297509..a14f9e62ca9 100644
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
 	.macro	disable_fiq
 	.endm
 
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 1fafc324460..7aa07a8ce23 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -23,6 +23,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/sp810.h>
+#include <asm/hardware/gic.h>
 
 #include <mach/ct-ca9x4.h>
 #include <mach/motherboard.h>
@@ -448,5 +449,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
 	.init_early	= v2m_init_early,
 	.init_irq	= v2m_init_irq,
 	.timer		= &v2m_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= v2m_init,
 MACHINE_END
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 73e93687b81..ab5cfddc0d7 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -112,6 +112,7 @@ static const char *xilinx_dt_match[] = {
 MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.map_io		= xilinx_map_io,
 	.init_irq	= xilinx_irq_init,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= xilinx_init_machine,
 	.timer		= &xttcpss_sys_timer,
 	.dt_compat	= xilinx_dt_match,
diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S
index 3cfc01b3746..d621fb73256 100644
--- a/arch/arm/mach-zynq/include/mach/entry-macro.S
+++ b/arch/arm/mach-zynq/include/mach/entry-macro.S
@@ -20,9 +20,6 @@
  * GNU General Public License for more details.
  */
 
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
-
 		.macro  disable_fiq
 		.endm
 
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index a08a95107a6..b3a1f2b3ada 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -10,7 +10,7 @@ choice
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for systems based on the Freescale i.MX ARMv4
@@ -26,7 +26,7 @@ config ARCH_IMX_V6_V7
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for machines using Freescale's i.MX50 and i.MX53
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index b9f0f5f499a..076db84f3e3 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,6 @@
 # Common support
 obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
 
-obj-$(CONFIG_ARM_GIC) += gic.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 8875fb415f6..55f15699a38 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <mach/common.h>
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 #include <mach/hardware.h>
 
 #include "irq-common.h"
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
deleted file mode 100644
index b3b8eed263b..00000000000
--- a/arch/arm/plat-mxc/gic.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <asm/exception.h>
-#include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
-{
-	u32 irqstat, irqnr;
-
-	do {
-		irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
-		irqnr = irqstat & 0x3ff;
-		if (irqnr == 1023)
-			break;
-
-		if (irqnr > 29 && irqnr < 1021)
-			handle_IRQ(irqnr, regs);
-#ifdef CONFIG_SMP
-		else if (irqnr < 16) {
-			writel_relaxed(irqstat, gic_cpu_base_addr +
-						GIC_CPU_EOI);
-			handle_IPI(irqnr, regs);
-		}
-#endif
-#ifdef CONFIG_LOCAL_TIMERS
-		else if (irqnr == 29) {
-			writel_relaxed(irqstat, gic_cpu_base_addr +
-						GIC_CPU_EOI);
-			handle_local_timer(regs);
-		}
-#endif
-	} while (1);
-}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 83b745a5e1b..14b4703e6e4 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -90,7 +90,6 @@ extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
-void gic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 9fe0dfcf4e7..def5d30cb67 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,22 +9,8 @@
  * published by the Free Software Foundation.
  */
 
-/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
-
 	.macro	disable_fiq
 	.endm
 
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	.endm
-
-	.macro test_for_ipi, irqnr, irqstat, base, tmp
-	.endm
-
-	.macro test_for_ltirq, irqnr, irqstat, base, tmp
-	.endm
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index e993a184189..a3c164c7ba8 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index d3a9fcd53c4..ebda7382c65 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -436,10 +436,6 @@
 #define INTCPS_NR_MIR_REGS	3
 #define INTCPS_NR_IRQS		96
 
-#ifndef __ASSEMBLY__
-extern void __iomem *omap_irq_base;
-#endif
-
 #include <mach/hardware.h>
 
 #ifdef CONFIG_FIQ
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9b9968fa869..8167ce66188 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -11,6 +11,7 @@ config PLAT_S5P
 	default y
 	select ARM_VIC if !ARCH_EXYNOS4
 	select ARM_GIC if ARCH_EXYNOS4
+	select GIC_NON_BANKED if ARCH_EXYNOS4
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK