Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...

10 files changed, 10 insertions, 18 deletions

diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
index fd1d9197d06..3e8c47c63ba 100644
--- a/arch/arm/mach-imx/dma-v1.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -310,7 +310,7 @@ imx_dma_setup_sg(int channel,
 	imxdma->resbytes = dma_length;
 
 	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
 		       channel);
 		return -EINVAL;
 	}
@@ -760,7 +760,6 @@ EXPORT_SYMBOL(imx_dma_free);
  * @name: the driver/caller own non-%NULL identification
  *
  * This function tries to find a free channel in the specified priority group
- * This function tries to find a free channel in the specified priority group
  * if the priority cannot be achieved it tries to look for free channel
  * in the higher and then even lower priority groups.
  *
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index af5e85b91d0..f060a3959a7 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -98,7 +98,7 @@ struct clkctl_acpu_speed {
 
 /*
  * ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initalize loops_per_jiffy to 0.
+ * out to optimized speed switching. Initialize loops_per_jiffy to 0.
  *
  * Table stepping up/down is optimized for 256mhz jumps while staying on the
  * same PLL.
@@ -494,7 +494,7 @@ uint32_t acpuclk_get_switch_time(void)
  * Clock driver initialization
  *---------------------------------------------------------------------------*/
 
-/* Initalize the lpj field in the acpu_freq_tbl. */
+/* Initialize the lpj field in the acpu_freq_tbl. */
 static void __init lpj_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index b32ccd954a1..ed8d330522f 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -463,7 +463,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	}
 	if (!ret) {
 		/*
-		 * Switch the parent clock in the heirarchy, and make sure
+		 * Switch the parent clock in the hierarchy, and make sure
 		 * that the new parent's usecount is correct.  Note: we
 		 * enable the new parent before disabling the old to avoid
 		 * any unnecessary hardware disable->enable transitions.
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index d522cd70bf5..ba53191ae4c 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -60,7 +60,7 @@
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
         .text
-/* Function to aquire the semaphore in scratchpad */
+/* Function to acquire the semaphore in scratchpad */
 ENTRY(lock_scratchpad_sem)
 	stmfd	sp!, {lr}	@ save registers on stack
 wait_sem:
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 5d5f330c5d9..16e682d5dbb 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  *
  * ChangeLog:
- *  2006 Pavel Machek <pavel@suse.cz>
+ *  2006 Pavel Machek <pavel@ucw.cz>
  *  03-06-2004 John Lenz <lenz@cs.wisc.edu>
  *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
  *  04-16-2001 Lineo Japan,Inc. ...
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 5f34eb674d6..653b3e0ab7b 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1561,13 +1561,6 @@ static void __init u300_init_check_chip(void)
 	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
 	       "(chip ID 0x%04x)\n", chipname, val);
 
-#ifdef CONFIG_MACH_U300_BS26
-	if ((val & 0xFF00U) != 0xc800) {
-		printk(KERN_ERR "Platform configured for BS25/BS26 " \
-		       "with DB3150 but %s detected, expect problems!",
-		       chipname);
-	}
-#endif
 #ifdef CONFIG_MACH_U300_BS330
 	if ((val & 0xFF00U) != 0xd800) {
 		printk(KERN_ERR "Platform configured for BS330 " \
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 5f61fd45a0c..d92790140fe 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -523,7 +523,7 @@ static void gpio_set_initial_values(void)
 
 	/*
 	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
-	 * to output and 'GPIO_IN' to input for each port. And initalize
+	 * to output and 'GPIO_IN' to input for each port. And initialize
 	 * default value on outputs.
 	 */
 	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 8474d05274b..931d26d1a54 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -43,7 +43,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 
-/* initalise all the clocks */
+/* initialise all the clocks */
 
 void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
 					   unsigned long hclk,
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 8bf79f3efdf..90a20512d68 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -391,7 +391,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
 		(clkp->enable)(clkp, 0);
 }
 
-/* initalise all the clocks */
+/* initialise all the clocks */
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
index d2aab3adcde..555eec6dc1c 100644
--- a/arch/arm/plat-spear/padmux.c
+++ b/arch/arm/plat-spear/padmux.c
@@ -66,7 +66,7 @@ static int pmx_mode_set(struct pmx_mode *mode)
  * If peripheral is not supported by current mode then request is rejected.
  * Conflicts between peripherals are not handled and peripherals will be
  * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enalbed will be present.
+ * In case of conflicts last peripheral enabled will be present.
  * Returns -ve on Err otherwise 0
  */
 static int pmx_devs_enable(struct pmx_dev **devs, u8 count)