Merge branch 'imx/imx6q' into next/soc

Conflicts:
	Documentation/devicetree/bindings/arm/fsl.txt
	arch/arm/Kconfig
	arch/arm/Kconfig.debug
	arch/arm/plat-mxc/include/mach/common.h

32 files changed, 3648 insertions, 80 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4fe1db17146..f41fe7a4001 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1435,7 +1435,7 @@ config SMP
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
 		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
 		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK
+		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
 	help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4bb7eb90f07..c865b927136 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -135,6 +135,118 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UART on Highbank based devices.
 
+	config DEBUG_IMX1_UART
+		bool "i.MX1 Debug UART"
+		depends on SOC_IMX1
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX1.
+
+	config DEBUG_IMX23_UART
+		bool "i.MX23 Debug UART"
+		depends on SOC_IMX23
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX23.
+
+	config DEBUG_IMX25_UART
+		bool "i.MX25 Debug UART"
+		depends on SOC_IMX25
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX25.
+
+	config DEBUG_IMX21_IMX27_UART
+		bool "i.MX21 and i.MX27 Debug UART"
+		depends on SOC_IMX21 || SOC_IMX27
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX21 or i.MX27.
+
+	config DEBUG_IMX28_UART
+		bool "i.MX28 Debug UART"
+		depends on SOC_IMX28
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX28.
+
+	config DEBUG_IMX31_IMX35_UART
+		bool "i.MX31 and i.MX35 Debug UART"
+		depends on SOC_IMX31 || SOC_IMX35
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX31 or i.MX35.
+
+	config DEBUG_IMX51_UART
+		bool "i.MX51 Debug UART"
+		depends on SOC_IMX51
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX51.
+
+	config DEBUG_IMX50_IMX53_UART
+		bool "i.MX50 and i.MX53 Debug UART"
+		depends on SOC_IMX50 || SOC_IMX53
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX50 or i.MX53.
+
+	config DEBUG_IMX6Q_UART
+		bool "i.MX6Q Debug UART"
+		depends on SOC_IMX6Q
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6Q.
+
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_REALVIEW_STD_PORT
+		bool "RealView Default UART"
+		depends on ARCH_REALVIEW
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on RealView EB, PB11MP, PBA8
+		  and PBX platforms.
+
+	config DEBUG_REALVIEW_PB1176_PORT
+		bool "RealView PB1176 UART"
+		depends on MACH_REALVIEW_PB1176
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the standard serial port on the RealView
+		  PB1176 platform.
+
 endchoice
 
 config EARLY_PRINTK
@@ -153,18 +265,6 @@ config OC_ETM
 	  buffer driver that will allow you to collect traces of the
 	  kernel code.
 
-config DEBUG_S3C_UART
-	depends on PLAT_SAMSUNG
-	int "S3C UART to use for low-level debug"
-	default "0"
-	help
-	  Choice for UART for kernel low-level using S3C UARTS,
-	  should be between zero and two. The port must have been
-	  initialised by the boot-loader before use.
-
-	  The uncompressor code port configuration is now handled
-	  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 config ARM_KPROBES_TEST
 	tristate "Kprobes test module"
 	depends on KPROBES && MODULES
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e775f93844a..ae458aee8b6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -159,7 +159,7 @@ machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
-machine-$(CONFIG_ARCH_MX3)		:= imx
+machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 00000000000..072974e443f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+	chosen {
+		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	soc {
+		aips-bus@02100000 { /* AIPS2 */
+			enet@02188000 {
+				phy-mode = "rgmii";
+				local-mac-address = [00 04 9F 01 1B 61];
+				status = "okay";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+				wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+				status = "okay";
+			};
+
+			usdhc@0219c000 { /* uSDHC4 */
+				fsl,card-wired;
+				status = "okay";
+			};
+
+			uart3: uart@021f0000 { /* UART4 */
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 25 0>; /* GPIO3_25 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
new file mode 100644
index 00000000000..7dda599558c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -0,0 +1,575 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		timer@00a00600 {
+			compatible = "arm,smp-twd";
+			reg = <0x00a00600 0x100>;
+			interrupts = <1 13 0xf4>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 0x04>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips-bus@02000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif@02004000 {
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 0x04>;
+				};
+
+				ecspi@02008000 { /* eCSPI1 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@0200c000 { /* eCSPI2 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@02010000 { /* eCSPI3 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@02014000 { /* eCSPI4 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@02018000 { /* eCSPI5 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 35 0x04>;
+					status = "disabled";
+				};
+
+				uart0: uart@02020000 { /* UART1 */
+					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 0x04>;
+					status = "disabled";
+				};
+
+				esai@02024000 {
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 51 0x04>;
+				};
+
+				ssi@02028000 { /* SSI1 */
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 0x04>;
+				};
+
+				ssi@0202c000 { /* SSI2 */
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 0x04>;
+				};
+
+				ssi@02030000 { /* SSI3 */
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 0x04>;
+				};
+
+				asrc@02034000 {
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 50 0x04>;
+				};
+
+				spba@0203c000 {
+					reg = <0x0203c000 0x4000>;
+				};
+			};
+
+			vpu@02040000 {
+				reg = <0x02040000 0x3c000>;
+				interrupts = <0 3 0x04 0 12 0x04>;
+			};
+
+			aipstz@0207c000 { /* AIPSTZ1 */
+				reg = <0x0207c000 0x4000>;
+			};
+
+			pwm@02080000 { /* PWM1 */
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 0x04>;
+			};
+
+			pwm@02084000 { /* PWM2 */
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 0x04>;
+			};
+
+			pwm@02088000 { /* PWM3 */
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 0x04>;
+			};
+
+			pwm@0208c000 { /* PWM4 */
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 0x04>;
+			};
+
+			flexcan@02090000 { /* CAN1 */
+				reg = <0x02090000 0x4000>;
+				interrupts = <0 110 0x04>;
+			};
+
+			flexcan@02094000 { /* CAN2 */
+				reg = <0x02094000 0x4000>;
+				interrupts = <0 111 0x04>;
+			};
+
+			gpt@02098000 {
+				compatible = "fsl,imx6q-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 0x04>;
+			};
+
+			gpio0: gpio@0209c000 { /* GPIO1 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 0x04 0 67 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio1: gpio@020a0000 { /* GPIO2 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 0x04 0 69 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio2: gpio@020a4000 { /* GPIO3 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 0x04 0 71 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio3: gpio@020a8000 { /* GPIO4 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 0x04 0 73 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio4: gpio@020ac000 { /* GPIO5 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 0x04 0 75 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio5: gpio@020b0000 { /* GPIO6 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <0 76 0x04 0 77 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio6: gpio@020b4000 { /* GPIO7 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <0 78 0x04 0 79 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			kpp@020b8000 {
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 0x04>;
+			};
+
+			wdog@020bc000 { /* WDOG1 */
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 0x04>;
+				status = "disabled";
+			};
+
+			wdog@020c0000 { /* WDOG2 */
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 0x04>;
+				status = "disabled";
+			};
+
+			ccm@020c4000 {
+				compatible = "fsl,imx6q-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 0x04 0 88 0x04>;
+			};
+
+			anatop@020c8000 {
+				compatible = "fsl,imx6q-anatop";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+			};
+
+			usbphy@020c9000 { /* USBPHY1 */
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 0x04>;
+			};
+
+			usbphy@020ca000 { /* USBPHY2 */
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 0x04>;
+			};
+
+			snvs@020cc000 {
+				reg = <0x020cc000 0x4000>;
+				interrupts = <0 19 0x04 0 20 0x04>;
+			};
+
+			epit@020d0000 { /* EPIT1 */
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 0x04>;
+			};
+
+			epit@020d4000 { /* EPIT2 */
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 0x04>;
+			};
+
+			src@020d8000 {
+				compatible = "fsl,imx6q-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 0x04 0 96 0x04>;
+			};
+
+			gpc@020dc000 {
+				compatible = "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupts = <0 89 0x04 0 90 0x04>;
+			};
+
+			iomuxc@020e0000 {
+				reg = <0x020e0000 0x4000>;
+			};
+
+			dcic@020e4000 { /* DCIC1 */
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 124 0x04>;
+			};
+
+			dcic@020e8000 { /* DCIC2 */
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 125 0x04>;
+			};
+
+			sdma@020ec000 {
+				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 0x04>;
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			caam@02100000 {
+				reg = <0x02100000 0x40000>;
+				interrupts = <0 105 0x04 0 106 0x04>;
+			};
+
+			aipstz@0217c000 { /* AIPSTZ2 */
+				reg = <0x0217c000 0x4000>;
+			};
+
+			enet@02188000 {
+				compatible = "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 118 0x04 0 119 0x04>;
+				status = "disabled";
+			};
+
+			mlb@0218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+			};
+
+			usdhc@02190000 { /* uSDHC1 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 0x04>;
+				status = "disabled";
+			};
+
+			usdhc@02194000 { /* uSDHC2 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 0x04>;
+				status = "disabled";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 0x04>;
+				status = "disabled";
+			};
+
+			usdhc@0219c000 { /* uSDHC4 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 0x04>;
+				status = "disabled";
+			};
+
+			i2c@021a0000 { /* I2C1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 0x04>;
+				status = "disabled";
+			};
+
+			i2c@021a4000 { /* I2C2 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 0x04>;
+				status = "disabled";
+			};
+
+			i2c@021a8000 { /* I2C3 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 0x04>;
+				status = "disabled";
+			};
+
+			romcp@021ac000 {
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc@021b0000 { /* MMDC0 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			mmdc@021b4000 { /* MMDC1 */
+				reg = <0x021b4000 0x4000>;
+			};
+
+			weim@021b8000 {
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 0x04>;
+			};
+
+			ocotp@021bc000 {
+				reg = <0x021bc000 0x4000>;
+			};
+
+			ocotp@021c0000 {
+				reg = <0x021c0000 0x4000>;
+				interrupts = <0 21 0x04>;
+			};
+
+			tzasc@021d0000 { /* TZASC1 */
+				reg = <0x021d0000 0x4000>;
+				interrupts = <0 108 0x04>;
+			};
+
+			tzasc@021d4000 { /* TZASC2 */
+				reg = <0x021d4000 0x4000>;
+				interrupts = <0 109 0x04>;
+			};
+
+			audmux@021d8000 {
+				reg = <0x021d8000 0x4000>;
+			};
+
+			mipi@021dc000 { /* MIPI-CSI */
+				reg = <0x021dc000 0x4000>;
+			};
+
+			mipi@021e0000 { /* MIPI-DSI */
+				reg = <0x021e0000 0x4000>;
+			};
+
+			vdoa@021e4000 {
+				reg = <0x021e4000 0x4000>;
+				interrupts = <0 18 0x04>;
+			};
+
+			uart1: uart@021e8000 { /* UART2 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <0 27 0x04>;
+				status = "disabled";
+			};
+
+			uart2: uart@021ec000 { /* UART3 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <0 28 0x04>;
+				status = "disabled";
+			};
+
+			uart3: uart@021f0000 { /* UART4 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <0 29 0x04>;
+				status = "disabled";
+			};
+
+			uart4: uart@021f4000 { /* UART5 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <0 30 0x04>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index b4e1bf8757c..b1f782f07f1 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
 config IMX_HAVE_DMA_V1
 	bool
+
+config HAVE_IMX_GPC
+	bool
+
+config HAVE_IMX_MMDC
+	bool
+
+config HAVE_IMX_SRC
+	bool
+
 #
 # ARCH_MX31 and ARCH_MX35 are left for compatibility
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
@@ -64,6 +74,7 @@ config SOC_IMX31
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MX31
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -73,6 +84,7 @@ config SOC_IMX35
 	select HAVE_EPIT
 	select ARCH_MX35
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 
 if ARCH_IMX_V4_V5
@@ -341,7 +353,7 @@ config MACH_IMX27IPCAM
 
 endif
 
-if ARCH_MX3
+if ARCH_IMX_V6_V7
 
 comment "MX31 platforms:"
 
@@ -591,4 +603,20 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+comment "i.MX6 family:"
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad support"
+	select ARM_GIC
+	select CACHE_L2X0
+	select CPU_V7
+	select HAVE_ARM_SCU
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
+	select USE_OF
+
+	help
+	  This enables support for Freescale i.MX6 Quad processor.
+
 endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 116d4b2d281..aba73214c2a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -60,3 +60,14 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_CPU_V7) += head-v7.o
+AFLAGS_head-v7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index ebee18b3884..136cfc6f2f8 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
 zreladdr-$(CONFIG_ARCH_MX3)	:= 0x80008000
 params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
 initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
+params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
+initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
new file mode 100644
index 00000000000..e0b926dfece
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -0,0 +1,2012 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/div64.h>
+#include <asm/mach/map.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define PLL_BASE		IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
+#define PLL1_SYS		(PLL_BASE + 0x000)
+#define PLL2_BUS		(PLL_BASE + 0x030)
+#define PLL3_USB_OTG		(PLL_BASE + 0x010)
+#define PLL4_AUDIO		(PLL_BASE + 0x070)
+#define PLL5_VIDEO		(PLL_BASE + 0x0a0)
+#define PLL6_MLB		(PLL_BASE + 0x0d0)
+#define PLL7_USB_HOST		(PLL_BASE + 0x020)
+#define PLL8_ENET		(PLL_BASE + 0x0e0)
+#define PFD_480			(PLL_BASE + 0x0f0)
+#define PFD_528			(PLL_BASE + 0x100)
+#define PLL_NUM_OFFSET		0x010
+#define PLL_DENOM_OFFSET	0x020
+
+#define PFD0			7
+#define PFD1			15
+#define PFD2			23
+#define PFD3			31
+#define PFD_FRAC_MASK		0x3f
+
+#define BM_PLL_BYPASS			(0x1 << 16)
+#define BM_PLL_ENABLE			(0x1 << 13)
+#define BM_PLL_POWER_DOWN		(0x1 << 12)
+#define BM_PLL_LOCK			(0x1 << 31)
+#define BP_PLL_SYS_DIV_SELECT		0
+#define BM_PLL_SYS_DIV_SELECT		(0x7f << 0)
+#define BP_PLL_BUS_DIV_SELECT		0
+#define BM_PLL_BUS_DIV_SELECT		(0x1 << 0)
+#define BP_PLL_USB_DIV_SELECT		0
+#define BM_PLL_USB_DIV_SELECT		(0x3 << 0)
+#define BP_PLL_AV_DIV_SELECT		0
+#define BM_PLL_AV_DIV_SELECT		(0x7f << 0)
+#define BP_PLL_ENET_DIV_SELECT		0
+#define BM_PLL_ENET_DIV_SELECT		(0x3 << 0)
+#define BM_PLL_ENET_EN_PCIE		(0x1 << 19)
+#define BM_PLL_ENET_EN_SATA		(0x1 << 20)
+
+#define CCM_BASE	IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
+#define CCR		(CCM_BASE + 0x00)
+#define CCDR		(CCM_BASE + 0x04)
+#define CSR		(CCM_BASE + 0x08)
+#define CCSR		(CCM_BASE + 0x0c)
+#define CACRR		(CCM_BASE + 0x10)
+#define CBCDR		(CCM_BASE + 0x14)
+#define CBCMR		(CCM_BASE + 0x18)
+#define CSCMR1		(CCM_BASE + 0x1c)
+#define CSCMR2		(CCM_BASE + 0x20)
+#define CSCDR1		(CCM_BASE + 0x24)
+#define CS1CDR		(CCM_BASE + 0x28)
+#define CS2CDR		(CCM_BASE + 0x2c)
+#define CDCDR		(CCM_BASE + 0x30)
+#define CHSCCDR		(CCM_BASE + 0x34)
+#define CSCDR2		(CCM_BASE + 0x38)
+#define CSCDR3		(CCM_BASE + 0x3c)
+#define CSCDR4		(CCM_BASE + 0x40)
+#define CWDR		(CCM_BASE + 0x44)
+#define CDHIPR		(CCM_BASE + 0x48)
+#define CDCR		(CCM_BASE + 0x4c)
+#define CTOR		(CCM_BASE + 0x50)
+#define CLPCR		(CCM_BASE + 0x54)
+#define CISR		(CCM_BASE + 0x58)
+#define CIMR		(CCM_BASE + 0x5c)
+#define CCOSR		(CCM_BASE + 0x60)
+#define CGPR		(CCM_BASE + 0x64)
+#define CCGR0		(CCM_BASE + 0x68)
+#define CCGR1		(CCM_BASE + 0x6c)
+#define CCGR2		(CCM_BASE + 0x70)
+#define CCGR3		(CCM_BASE + 0x74)
+#define CCGR4		(CCM_BASE + 0x78)
+#define CCGR5		(CCM_BASE + 0x7c)
+#define CCGR6		(CCM_BASE + 0x80)
+#define CCGR7		(CCM_BASE + 0x84)
+#define CMEOR		(CCM_BASE + 0x88)
+
+#define CG0		0
+#define CG1		2
+#define CG2		4
+#define CG3		6
+#define CG4		8
+#define CG5		10
+#define CG6		12
+#define CG7		14
+#define CG8		16
+#define CG9		18
+#define CG10		20
+#define CG11		22
+#define CG12		24
+#define CG13		26
+#define CG14		28
+#define CG15		30
+
+#define BM_CCSR_PLL1_SW_SEL		(0x1 << 2)
+#define BM_CCSR_STEP_SEL		(0x1 << 8)
+
+#define BP_CACRR_ARM_PODF		0
+#define BM_CACRR_ARM_PODF		(0x7 << 0)
+
+#define BP_CBCDR_PERIPH2_CLK2_PODF	0
+#define BM_CBCDR_PERIPH2_CLK2_PODF	(0x7 << 0)
+#define BP_CBCDR_MMDC_CH1_AXI_PODF	3
+#define BM_CBCDR_MMDC_CH1_AXI_PODF	(0x7 << 3)
+#define BP_CBCDR_AXI_SEL		6
+#define BM_CBCDR_AXI_SEL		(0x3 << 6)
+#define BP_CBCDR_IPG_PODF		8
+#define BM_CBCDR_IPG_PODF		(0x3 << 8)
+#define BP_CBCDR_AHB_PODF		10
+#define BM_CBCDR_AHB_PODF		(0x7 << 10)
+#define BP_CBCDR_AXI_PODF		16
+#define BM_CBCDR_AXI_PODF		(0x7 << 16)
+#define BP_CBCDR_MMDC_CH0_AXI_PODF	19
+#define BM_CBCDR_MMDC_CH0_AXI_PODF	(0x7 << 19)
+#define BP_CBCDR_PERIPH_CLK_SEL		25
+#define BM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
+#define BP_CBCDR_PERIPH2_CLK_SEL	26
+#define BM_CBCDR_PERIPH2_CLK_SEL	(0x1 << 26)
+#define BP_CBCDR_PERIPH_CLK2_PODF	27
+#define BM_CBCDR_PERIPH_CLK2_PODF	(0x7 << 27)
+
+#define BP_CBCMR_GPU2D_AXI_SEL		0
+#define BM_CBCMR_GPU2D_AXI_SEL		(0x1 << 0)
+#define BP_CBCMR_GPU3D_AXI_SEL		1
+#define BM_CBCMR_GPU3D_AXI_SEL		(0x1 << 1)
+#define BP_CBCMR_GPU3D_CORE_SEL		4
+#define BM_CBCMR_GPU3D_CORE_SEL		(0x3 << 4)
+#define BP_CBCMR_GPU3D_SHADER_SEL	8
+#define BM_CBCMR_GPU3D_SHADER_SEL	(0x3 << 8)
+#define BP_CBCMR_PCIE_AXI_SEL		10
+#define BM_CBCMR_PCIE_AXI_SEL		(0x1 << 10)
+#define BP_CBCMR_VDO_AXI_SEL		11
+#define BM_CBCMR_VDO_AXI_SEL		(0x1 << 11)
+#define BP_CBCMR_PERIPH_CLK2_SEL	12
+#define BM_CBCMR_PERIPH_CLK2_SEL	(0x3 << 12)
+#define BP_CBCMR_VPU_AXI_SEL		14
+#define BM_CBCMR_VPU_AXI_SEL		(0x3 << 14)
+#define BP_CBCMR_GPU2D_CORE_SEL		16
+#define BM_CBCMR_GPU2D_CORE_SEL		(0x3 << 16)
+#define BP_CBCMR_PRE_PERIPH_CLK_SEL	18
+#define BM_CBCMR_PRE_PERIPH_CLK_SEL	(0x3 << 18)
+#define BP_CBCMR_PERIPH2_CLK2_SEL	20
+#define BM_CBCMR_PERIPH2_CLK2_SEL	(0x1 << 20)
+#define BP_CBCMR_PRE_PERIPH2_CLK_SEL	21
+#define BM_CBCMR_PRE_PERIPH2_CLK_SEL	(0x3 << 21)
+#define BP_CBCMR_GPU2D_CORE_PODF	23
+#define BM_CBCMR_GPU2D_CORE_PODF	(0x7 << 23)
+#define BP_CBCMR_GPU3D_CORE_PODF	26
+#define BM_CBCMR_GPU3D_CORE_PODF	(0x7 << 26)
+#define BP_CBCMR_GPU3D_SHADER_PODF	29
+#define BM_CBCMR_GPU3D_SHADER_PODF	(0x7 << 29)
+
+#define BP_CSCMR1_PERCLK_PODF		0
+#define BM_CSCMR1_PERCLK_PODF		(0x3f << 0)
+#define BP_CSCMR1_SSI1_SEL		10
+#define BM_CSCMR1_SSI1_SEL		(0x3 << 10)
+#define BP_CSCMR1_SSI2_SEL		12
+#define BM_CSCMR1_SSI2_SEL		(0x3 << 12)
+#define BP_CSCMR1_SSI3_SEL		14
+#define BM_CSCMR1_SSI3_SEL		(0x3 << 14)
+#define BP_CSCMR1_USDHC1_SEL		16
+#define BM_CSCMR1_USDHC1_SEL		(0x1 << 16)
+#define BP_CSCMR1_USDHC2_SEL		17
+#define BM_CSCMR1_USDHC2_SEL		(0x1 << 17)
+#define BP_CSCMR1_USDHC3_SEL		18
+#define BM_CSCMR1_USDHC3_SEL		(0x1 << 18)
+#define BP_CSCMR1_USDHC4_SEL		19
+#define BM_CSCMR1_USDHC4_SEL		(0x1 << 19)
+#define BP_CSCMR1_EMI_PODF		20
+#define BM_CSCMR1_EMI_PODF		(0x7 << 20)
+#define BP_CSCMR1_EMI_SLOW_PODF		23
+#define BM_CSCMR1_EMI_SLOW_PODF		(0x7 << 23)
+#define BP_CSCMR1_EMI_SEL		27
+#define BM_CSCMR1_EMI_SEL		(0x3 << 27)
+#define BP_CSCMR1_EMI_SLOW_SEL		29
+#define BM_CSCMR1_EMI_SLOW_SEL		(0x3 << 29)
+
+#define BP_CSCMR2_CAN_PODF		2
+#define BM_CSCMR2_CAN_PODF		(0x3f << 2)
+#define BM_CSCMR2_LDB_DI0_IPU_DIV	(0x1 << 10)
+#define BM_CSCMR2_LDB_DI1_IPU_DIV	(0x1 << 11)
+#define BP_CSCMR2_ESAI_SEL		19
+#define BM_CSCMR2_ESAI_SEL		(0x3 << 19)
+
+#define BP_CSCDR1_UART_PODF		0
+#define BM_CSCDR1_UART_PODF		(0x3f << 0)
+#define BP_CSCDR1_USDHC1_PODF		11
+#define BM_CSCDR1_USDHC1_PODF		(0x7 << 11)
+#define BP_CSCDR1_USDHC2_PODF		16
+#define BM_CSCDR1_USDHC2_PODF		(0x7 << 16)
+#define BP_CSCDR1_USDHC3_PODF		19
+#define BM_CSCDR1_USDHC3_PODF		(0x7 << 19)
+#define BP_CSCDR1_USDHC4_PODF		22
+#define BM_CSCDR1_USDHC4_PODF		(0x7 << 22)
+#define BP_CSCDR1_VPU_AXI_PODF		25
+#define BM_CSCDR1_VPU_AXI_PODF		(0x7 << 25)
+
+#define BP_CS1CDR_SSI1_PODF		0
+#define BM_CS1CDR_SSI1_PODF		(0x3f << 0)
+#define BP_CS1CDR_SSI1_PRED		6
+#define BM_CS1CDR_SSI1_PRED		(0x7 << 6)
+#define BP_CS1CDR_ESAI_PRED		9
+#define BM_CS1CDR_ESAI_PRED		(0x7 << 9)
+#define BP_CS1CDR_SSI3_PODF		16
+#define BM_CS1CDR_SSI3_PODF		(0x3f << 16)
+#define BP_CS1CDR_SSI3_PRED		22
+#define BM_CS1CDR_SSI3_PRED		(0x7 << 22)
+#define BP_CS1CDR_ESAI_PODF		25
+#define BM_CS1CDR_ESAI_PODF		(0x7 << 25)
+
+#define BP_CS2CDR_SSI2_PODF		0
+#define BM_CS2CDR_SSI2_PODF		(0x3f << 0)
+#define BP_CS2CDR_SSI2_PRED		6
+#define BM_CS2CDR_SSI2_PRED		(0x7 << 6)
+#define BP_CS2CDR_LDB_DI0_SEL		9
+#define BM_CS2CDR_LDB_DI0_SEL		(0x7 << 9)
+#define BP_CS2CDR_LDB_DI1_SEL		12
+#define BM_CS2CDR_LDB_DI1_SEL		(0x7 << 12)
+#define BP_CS2CDR_ENFC_SEL		16
+#define BM_CS2CDR_ENFC_SEL		(0x3 << 16)
+#define BP_CS2CDR_ENFC_PRED		18
+#define BM_CS2CDR_ENFC_PRED		(0x7 << 18)
+#define BP_CS2CDR_ENFC_PODF		21
+#define BM_CS2CDR_ENFC_PODF		(0x3f << 21)
+
+#define BP_CDCDR_ASRC_SERIAL_SEL	7
+#define BM_CDCDR_ASRC_SERIAL_SEL	(0x3 << 7)
+#define BP_CDCDR_ASRC_SERIAL_PODF	9
+#define BM_CDCDR_ASRC_SERIAL_PODF	(0x7 << 9)
+#define BP_CDCDR_ASRC_SERIAL_PRED	12
+#define BM_CDCDR_ASRC_SERIAL_PRED	(0x7 << 12)
+#define BP_CDCDR_SPDIF_SEL		20
+#define BM_CDCDR_SPDIF_SEL		(0x3 << 20)
+#define BP_CDCDR_SPDIF_PODF		22
+#define BM_CDCDR_SPDIF_PODF		(0x7 << 22)
+#define BP_CDCDR_SPDIF_PRED		25
+#define BM_CDCDR_SPDIF_PRED		(0x7 << 25)
+#define BP_CDCDR_HSI_TX_PODF		29
+#define BM_CDCDR_HSI_TX_PODF		(0x7 << 29)
+#define BP_CDCDR_HSI_TX_SEL		28
+#define BM_CDCDR_HSI_TX_SEL		(0x1 << 28)
+
+#define BP_CHSCCDR_IPU1_DI0_SEL		0
+#define BM_CHSCCDR_IPU1_DI0_SEL		(0x7 << 0)
+#define BP_CHSCCDR_IPU1_DI0_PRE_PODF	3
+#define BM_CHSCCDR_IPU1_DI0_PRE_PODF	(0x7 << 3)
+#define BP_CHSCCDR_IPU1_DI0_PRE_SEL	6
+#define BM_CHSCCDR_IPU1_DI0_PRE_SEL	(0x7 << 6)
+#define BP_CHSCCDR_IPU1_DI1_SEL		9
+#define BM_CHSCCDR_IPU1_DI1_SEL		(0x7 << 9)
+#define BP_CHSCCDR_IPU1_DI1_PRE_PODF	12
+#define BM_CHSCCDR_IPU1_DI1_PRE_PODF	(0x7 << 12)
+#define BP_CHSCCDR_IPU1_DI1_PRE_SEL	15
+#define BM_CHSCCDR_IPU1_DI1_PRE_SEL	(0x7 << 15)
+
+#define BP_CSCDR2_IPU2_DI0_SEL		0
+#define BM_CSCDR2_IPU2_DI0_SEL		(0x7)
+#define BP_CSCDR2_IPU2_DI0_PRE_PODF	3
+#define BM_CSCDR2_IPU2_DI0_PRE_PODF	(0x7 << 3)
+#define BP_CSCDR2_IPU2_DI0_PRE_SEL	6
+#define BM_CSCDR2_IPU2_DI0_PRE_SEL	(0x7 << 6)
+#define BP_CSCDR2_IPU2_DI1_SEL		9
+#define BM_CSCDR2_IPU2_DI1_SEL		(0x7 << 9)
+#define BP_CSCDR2_IPU2_DI1_PRE_PODF	12
+#define BM_CSCDR2_IPU2_DI1_PRE_PODF	(0x7 << 12)
+#define BP_CSCDR2_IPU2_DI1_PRE_SEL	15
+#define BM_CSCDR2_IPU2_DI1_PRE_SEL	(0x7 << 15)
+#define BP_CSCDR2_ECSPI_CLK_PODF	19
+#define BM_CSCDR2_ECSPI_CLK_PODF	(0x3f << 19)
+
+#define BP_CSCDR3_IPU1_HSP_SEL		9
+#define BM_CSCDR3_IPU1_HSP_SEL		(0x3 << 9)
+#define BP_CSCDR3_IPU1_HSP_PODF		11
+#define BM_CSCDR3_IPU1_HSP_PODF		(0x7 << 11)
+#define BP_CSCDR3_IPU2_HSP_SEL		14
+#define BM_CSCDR3_IPU2_HSP_SEL		(0x3 << 14)
+#define BP_CSCDR3_IPU2_HSP_PODF		16
+#define BM_CSCDR3_IPU2_HSP_PODF		(0x7 << 16)
+
+#define BM_CDHIPR_AXI_PODF_BUSY		(0x1 << 0)
+#define BM_CDHIPR_AHB_PODF_BUSY		(0x1 << 1)
+#define BM_CDHIPR_MMDC_CH1_PODF_BUSY	(0x1 << 2)
+#define BM_CDHIPR_PERIPH2_SEL_BUSY	(0x1 << 3)
+#define BM_CDHIPR_MMDC_CH0_PODF_BUSY	(0x1 << 4)
+#define BM_CDHIPR_PERIPH_SEL_BUSY	(0x1 << 5)
+#define BM_CDHIPR_ARM_PODF_BUSY		(0x1 << 16)
+
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define FREQ_480M	480000000
+#define FREQ_528M	528000000
+#define FREQ_594M	594000000
+#define FREQ_650M	650000000
+#define FREQ_1300M	1300000000
+
+static struct clk pll1_sys;
+static struct clk pll2_bus;
+static struct clk pll3_usb_otg;
+static struct clk pll4_audio;
+static struct clk pll5_video;
+static struct clk pll6_mlb;
+static struct clk pll7_usb_host;
+static struct clk pll8_enet;
+static struct clk apbh_dma_clk;
+static struct clk arm_clk;
+static struct clk ipg_clk;
+static struct clk ahb_clk;
+static struct clk axi_clk;
+static struct clk mmdc_ch0_axi_clk;
+static struct clk mmdc_ch1_axi_clk;
+static struct clk periph_clk;
+static struct clk periph_pre_clk;
+static struct clk periph_clk2_clk;
+static struct clk periph2_clk;
+static struct clk periph2_pre_clk;
+static struct clk periph2_clk2_clk;
+static struct clk gpu2d_core_clk;
+static struct clk gpu3d_core_clk;
+static struct clk gpu3d_shader_clk;
+static struct clk ipg_perclk;
+static struct clk emi_clk;
+static struct clk emi_slow_clk;
+static struct clk can1_clk;
+static struct clk uart_clk;
+static struct clk usdhc1_clk;
+static struct clk usdhc2_clk;
+static struct clk usdhc3_clk;
+static struct clk usdhc4_clk;
+static struct clk vpu_clk;
+static struct clk hsi_tx_clk;
+static struct clk ipu1_di0_pre_clk;
+static struct clk ipu1_di1_pre_clk;
+static struct clk ipu2_di0_pre_clk;
+static struct clk ipu2_di1_pre_clk;
+static struct clk ipu1_clk;
+static struct clk ipu2_clk;
+static struct clk ssi1_clk;
+static struct clk ssi3_clk;
+static struct clk esai_clk;
+static struct clk ssi2_clk;
+static struct clk spdif_clk;
+static struct clk asrc_serial_clk;
+static struct clk gpu2d_axi_clk;
+static struct clk gpu3d_axi_clk;
+static struct clk pcie_clk;
+static struct clk vdo_axi_clk;
+static struct clk ldb_di0_clk;
+static struct clk ldb_di1_clk;
+static struct clk ipu1_di0_clk;
+static struct clk ipu1_di1_clk;
+static struct clk ipu2_di0_clk;
+static struct clk ipu2_di1_clk;
+static struct clk enfc_clk;
+static struct clk dummy_clk = {};
+
+static unsigned long external_high_reference;
+static unsigned long external_low_reference;
+static unsigned long oscillator_reference;
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+	return oscillator_reference;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+	.get_rate = get_oscillator_reference_clock_rate,
+};
+
+static inline void __iomem *pll_get_reg_addr(struct clk *pll)
+{
+	if (pll == &pll1_sys)
+		return PLL1_SYS;
+	else if (pll == &pll2_bus)
+		return PLL2_BUS;
+	else if (pll == &pll3_usb_otg)
+		return PLL3_USB_OTG;
+	else if (pll == &pll4_audio)
+		return PLL4_AUDIO;
+	else if (pll == &pll5_video)
+		return PLL5_VIDEO;
+	else if (pll == &pll6_mlb)
+		return PLL6_MLB;
+	else if (pll == &pll7_usb_host)
+		return PLL7_USB_HOST;
+	else if (pll == &pll8_enet)
+		return PLL8_ENET;
+	else
+		BUG();
+
+	return NULL;
+}
+
+static int pll_enable(struct clk *clk)
+{
+	int timeout = 0x100000;
+	void __iomem *reg;
+	u32 val;
+
+	reg = pll_get_reg_addr(clk);
+	val = readl_relaxed(reg);
+	val &= ~BM_PLL_BYPASS;
+	val &= ~BM_PLL_POWER_DOWN;
+	/* 480MHz PLLs have the opposite definition for power bit */
+	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+		val |= BM_PLL_POWER_DOWN;
+	writel_relaxed(val, reg);
+
+	/* Wait for PLL to lock */
+	while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		return -EBUSY;
+
+	/* Enable the PLL output now */
+	val = readl_relaxed(reg);
+	val |= BM_PLL_ENABLE;
+	writel_relaxed(val, reg);
+
+	return 0;
+}
+
+static void pll_disable(struct clk *clk)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = pll_get_reg_addr(clk);
+	val = readl_relaxed(reg);
+	val &= ~BM_PLL_ENABLE;
+	val |= BM_PLL_BYPASS;
+	val |= BM_PLL_POWER_DOWN;
+	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+		val &= ~BM_PLL_POWER_DOWN;
+	writel_relaxed(val, reg);
+}
+
+static unsigned long pll1_sys_get_rate(struct clk *clk)
+{
+	u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
+		  BP_PLL_SYS_DIV_SELECT;
+
+	return clk_get_rate(clk->parent) * div / 2;
+}
+
+static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val, div;
+
+	if (rate < FREQ_650M || rate > FREQ_1300M)
+		return -EINVAL;
+
+	div = rate * 2 / clk_get_rate(clk->parent);
+	val = readl_relaxed(PLL1_SYS);
+	val &= ~BM_PLL_SYS_DIV_SELECT;
+	val |= div << BP_PLL_SYS_DIV_SELECT;
+	writel_relaxed(val, PLL1_SYS);
+
+	return 0;
+}
+
+static unsigned long pll8_enet_get_rate(struct clk *clk)
+{
+	u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
+		  BP_PLL_ENET_DIV_SELECT;
+
+	switch (div) {
+	case 0:
+		return 25000000;
+	case 1:
+		return 50000000;
+	case 2:
+		return 100000000;
+	case 3:
+		return 125000000;
+	}
+
+	return 0;
+}
+
+static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val, div;
+
+	switch (rate) {
+	case 25000000:
+		div = 0;
+		break;
+	case 50000000:
+		div = 1;
+		break;
+	case 100000000:
+		div = 2;
+		break;
+	case 125000000:
+		div = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = readl_relaxed(PLL8_ENET);
+	val &= ~BM_PLL_ENET_DIV_SELECT;
+	val |= div << BP_PLL_ENET_DIV_SELECT;
+	writel_relaxed(val, PLL8_ENET);
+
+	return 0;
+}
+
+static unsigned long pll_av_get_rate(struct clk *clk)
+{
+	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
+	u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
+	u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
+		  BP_PLL_AV_DIV_SELECT;
+
+	return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static int pll_av_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+	unsigned int parent_rate = clk_get_rate(clk->parent);
+	u32 val, div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate < FREQ_650M || rate > FREQ_1300M)
+		return -EINVAL;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	val = readl_relaxed(reg);
+	val &= ~BM_PLL_AV_DIV_SELECT;
+	val |= div << BP_PLL_AV_DIV_SELECT;
+	writel_relaxed(val, reg);
+	writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
+	writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
+
+	return 0;
+}
+
+static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
+{
+	void __iomem *reg;
+
+	if (clk == &pll2_bus) {
+		reg = PLL2_BUS;
+		*bp = BP_PLL_BUS_DIV_SELECT;
+		*bm = BM_PLL_BUS_DIV_SELECT;
+	} else if (clk == &pll3_usb_otg) {
+		reg = PLL3_USB_OTG;
+		*bp = BP_PLL_USB_DIV_SELECT;
+		*bm = BM_PLL_USB_DIV_SELECT;
+	} else if (clk == &pll7_usb_host) {
+		reg = PLL7_USB_HOST;
+		*bp = BP_PLL_USB_DIV_SELECT;
+		*bm = BM_PLL_USB_DIV_SELECT;
+	} else {
+		BUG();
+	}
+
+	return reg;
+}
+
+static unsigned long pll_get_rate(struct clk *clk)
+{
+	void __iomem *reg;
+	u32 div, bp, bm;
+
+	reg = pll_get_div_reg_bit(clk, &bp, &bm);
+	div = (readl_relaxed(reg) & bm) >> bp;
+
+	return (div == 1) ? clk_get_rate(clk->parent) * 22 :
+			    clk_get_rate(clk->parent) * 20;
+}
+
+static int pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *reg;
+	u32 val, div, bp, bm;
+
+	if (rate == FREQ_528M)
+		div = 1;
+	else if (rate == FREQ_480M)
+		div = 0;
+	else
+		return -EINVAL;
+
+	reg = pll_get_div_reg_bit(clk, &bp, &bm);
+	val = readl_relaxed(reg);
+	val &= ~bm;
+	val |= div << bp;
+	writel_relaxed(val, reg);
+
+	return 0;
+}
+
+#define pll2_bus_get_rate	pll_get_rate
+#define pll2_bus_set_rate	pll_set_rate
+#define pll3_usb_otg_get_rate	pll_get_rate
+#define pll3_usb_otg_set_rate	pll_set_rate
+#define pll7_usb_host_get_rate	pll_get_rate
+#define pll7_usb_host_set_rate	pll_set_rate
+#define pll4_audio_get_rate	pll_av_get_rate
+#define pll4_audio_set_rate	pll_av_set_rate
+#define pll5_video_get_rate	pll_av_get_rate
+#define pll5_video_set_rate	pll_av_set_rate
+#define pll6_mlb_get_rate	NULL
+#define pll6_mlb_set_rate	NULL
+
+#define DEF_PLL(name)					\
+	static struct clk name = {			\
+		.enable		= pll_enable,		\
+		.disable	= pll_disable,		\
+		.get_rate	= name##_get_rate,	\
+		.set_rate	= name##_set_rate,	\
+		.parent		= &osc_clk,		\
+	}
+
+DEF_PLL(pll1_sys);
+DEF_PLL(pll2_bus);
+DEF_PLL(pll3_usb_otg);
+DEF_PLL(pll4_audio);
+DEF_PLL(pll5_video);
+DEF_PLL(pll6_mlb);
+DEF_PLL(pll7_usb_host);
+DEF_PLL(pll8_enet);
+
+static unsigned long pfd_get_rate(struct clk *clk)
+{
+	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+	u32 frac, bp_frac;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	bp_frac = clk->enable_shift - 7;
+	frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int pfd_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val, frac, bp_frac;
+	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	/*
+	 * Round up the divider so that we don't set a rate
+	 * higher than what is requested
+	 */
+	tmp += rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	frac = (frac < 12) ? 12 : frac;
+	frac = (frac > 35) ? 35 : frac;
+
+	/*
+	 * The frac field always starts from 7 bits lower
+	 * position of enable bit
+	 */
+	bp_frac = clk->enable_shift - 7;
+	val = readl_relaxed(clk->enable_reg);
+	val &= ~(PFD_FRAC_MASK << bp_frac);
+	val |= frac << bp_frac;
+	writel_relaxed(val, clk->enable_reg);
+
+	tmp = (u64) clk_get_rate(clk->parent) * 18;
+	do_div(tmp, frac);
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.disable(&apbh_dma_clk);
+
+	return 0;
+}
+
+static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 frac;
+	u64 tmp;
+
+	tmp = (u64) clk_get_rate(clk->parent) * 18;
+	tmp += rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	frac = (frac < 12) ? 12 : frac;
+	frac = (frac > 35) ? 35 : frac;
+	tmp = (u64) clk_get_rate(clk->parent) * 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int pfd_enable(struct clk *clk)
+{
+	u32 val;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	val = readl_relaxed(clk->enable_reg);
+	val &= ~(1 << clk->enable_shift);
+	writel_relaxed(val, clk->enable_reg);
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.disable(&apbh_dma_clk);
+
+	return 0;
+}
+
+static void pfd_disable(struct clk *clk)
+{
+	u32 val;
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.enable(&apbh_dma_clk);
+
+	val = readl_relaxed(clk->enable_reg);
+	val |= 1 << clk->enable_shift;
+	writel_relaxed(val, clk->enable_reg);
+
+	if (apbh_dma_clk.usecount == 0)
+		apbh_dma_clk.disable(&apbh_dma_clk);
+}
+
+#define DEF_PFD(name, er, es, p)			\
+	static struct clk name = {			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.enable		= pfd_enable,		\
+		.disable	= pfd_disable,		\
+		.get_rate	= pfd_get_rate,		\
+		.set_rate	= pfd_set_rate,		\
+		.round_rate	= pfd_round_rate,	\
+		.parent		= p,			\
+	}
+
+DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
+DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
+DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
+DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
+
+static unsigned long pll2_200m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk pll2_200m = {
+	.parent = &pll2_pfd_400m,
+	.get_rate = pll2_200m_get_rate,
+};
+
+static unsigned long pll3_120m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 4;
+}
+
+static struct clk pll3_120m = {
+	.parent = &pll3_usb_otg,
+	.get_rate = pll3_120m_get_rate,
+};
+
+static unsigned long pll3_80m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 6;
+}
+
+static struct clk pll3_80m = {
+	.parent = &pll3_usb_otg,
+	.get_rate = pll3_80m_get_rate,
+};
+
+static unsigned long pll3_60m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 8;
+}
+
+static struct clk pll3_60m = {
+	.parent = &pll3_usb_otg,
+	.get_rate = pll3_60m_get_rate,
+};
+
+static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 val = readl_relaxed(CCSR);
+
+	if (parent == &pll1_sys) {
+		val &= ~BM_CCSR_PLL1_SW_SEL;
+		val &= ~BM_CCSR_STEP_SEL;
+	} else if (parent == &osc_clk) {
+		val |= BM_CCSR_PLL1_SW_SEL;
+		val &= ~BM_CCSR_STEP_SEL;
+	} else if (parent == &pll2_pfd_400m) {
+		val |= BM_CCSR_PLL1_SW_SEL;
+		val |= BM_CCSR_STEP_SEL;
+	} else {
+		return -EINVAL;
+	}
+
+	writel_relaxed(val, CCSR);
+
+	return 0;
+}
+
+static struct clk pll1_sw_clk = {
+	.parent = &pll1_sys,
+	.set_parent = pll1_sw_clk_set_parent,
+};
+
+static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
+{
+	u32 min_pred, temp_pred, old_err, err;
+
+	if (div >= 512) {
+		*pred = 8;
+		*podf = 64;
+	} else if (div >= 8) {
+		min_pred = (div - 1) / 64 + 1;
+		old_err = 8;
+		for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
+			err = div % temp_pred;
+			if (err == 0) {
+				*pred = temp_pred;
+				break;
+			}
+			err = temp_pred - err;
+			if (err < old_err) {
+				old_err = err;
+				*pred = temp_pred;
+			}
+		}
+		*podf = (div + *pred - 1) / *pred;
+	} else if (div < 8) {
+		*pred = div;
+		*podf = 1;
+	}
+}
+
+static int _clk_enable(struct clk *clk)
+{
+	u32 reg;
+	reg = readl_relaxed(clk->enable_reg);
+	reg |= 0x3 << clk->enable_shift;
+	writel_relaxed(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	u32 reg;
+	reg = readl_relaxed(clk->enable_reg);
+	reg &= ~(0x3 << clk->enable_shift);
+	writel_relaxed(reg, clk->enable_reg);
+}
+
+struct divider {
+	struct clk *clk;
+	void __iomem *reg;
+	u32 bp_pred;
+	u32 bm_pred;
+	u32 bp_podf;
+	u32 bm_podf;
+};
+
+#define DEF_CLK_DIV1(d, c, r, b)				\
+	static struct divider d = {				\
+		.clk = c,					\
+		.reg = r,					\
+		.bp_podf = BP_##r##_##b##_PODF,			\
+		.bm_podf = BM_##r##_##b##_PODF,			\
+	}
+
+DEF_CLK_DIV1(arm_div,		&arm_clk,		CACRR,	ARM);
+DEF_CLK_DIV1(ipg_div,		&ipg_clk,		CBCDR,	IPG);
+DEF_CLK_DIV1(ahb_div,		&ahb_clk,		CBCDR,	AHB);
+DEF_CLK_DIV1(axi_div,		&axi_clk,		CBCDR,	AXI);
+DEF_CLK_DIV1(mmdc_ch0_axi_div,	&mmdc_ch0_axi_clk,	CBCDR,	MMDC_CH0_AXI);
+DEF_CLK_DIV1(mmdc_ch1_axi_div,	&mmdc_ch1_axi_clk,	CBCDR,	MMDC_CH1_AXI);
+DEF_CLK_DIV1(periph_clk2_div,	&periph_clk2_clk,	CBCDR,	PERIPH_CLK2);
+DEF_CLK_DIV1(periph2_clk2_div,	&periph2_clk2_clk,	CBCDR,	PERIPH2_CLK2);
+DEF_CLK_DIV1(gpu2d_core_div,	&gpu2d_core_clk,	CBCMR,	GPU2D_CORE);
+DEF_CLK_DIV1(gpu3d_core_div,	&gpu3d_core_clk,	CBCMR,	GPU3D_CORE);
+DEF_CLK_DIV1(gpu3d_shader_div,	&gpu3d_shader_clk,	CBCMR,	GPU3D_SHADER);
+DEF_CLK_DIV1(ipg_perclk_div,	&ipg_perclk,		CSCMR1,	PERCLK);
+DEF_CLK_DIV1(emi_div,		&emi_clk,		CSCMR1,	EMI);
+DEF_CLK_DIV1(emi_slow_div,	&emi_slow_clk,		CSCMR1,	EMI_SLOW);
+DEF_CLK_DIV1(can_div,		&can1_clk,		CSCMR2,	CAN);
+DEF_CLK_DIV1(uart_div,		&uart_clk,		CSCDR1,	UART);
+DEF_CLK_DIV1(usdhc1_div,	&usdhc1_clk,		CSCDR1,	USDHC1);
+DEF_CLK_DIV1(usdhc2_div,	&usdhc2_clk,		CSCDR1,	USDHC2);
+DEF_CLK_DIV1(usdhc3_div,	&usdhc3_clk,		CSCDR1,	USDHC3);
+DEF_CLK_DIV1(usdhc4_div,	&usdhc4_clk,		CSCDR1,	USDHC4);
+DEF_CLK_DIV1(vpu_div,		&vpu_clk,		CSCDR1,	VPU_AXI);
+DEF_CLK_DIV1(hsi_tx_div,	&hsi_tx_clk,		CDCDR,	HSI_TX);
+DEF_CLK_DIV1(ipu1_di0_pre_div,	&ipu1_di0_pre_clk,	CHSCCDR, IPU1_DI0_PRE);
+DEF_CLK_DIV1(ipu1_di1_pre_div,	&ipu1_di1_pre_clk,	CHSCCDR, IPU1_DI1_PRE);
+DEF_CLK_DIV1(ipu2_di0_pre_div,	&ipu2_di0_pre_clk,	CSCDR2,	IPU2_DI0_PRE);
+DEF_CLK_DIV1(ipu2_di1_pre_div,	&ipu2_di1_pre_clk,	CSCDR2,	IPU2_DI1_PRE);
+DEF_CLK_DIV1(ipu1_div,		&ipu1_clk,		CSCDR3,	IPU1_HSP);
+DEF_CLK_DIV1(ipu2_div,		&ipu2_clk,		CSCDR3,	IPU2_HSP);
+
+#define DEF_CLK_DIV2(d, c, r, b)				\
+	static struct divider d = {				\
+		.clk = c,					\
+		.reg = r,					\
+		.bp_pred = BP_##r##_##b##_PRED,			\
+		.bm_pred = BM_##r##_##b##_PRED,			\
+		.bp_podf = BP_##r##_##b##_PODF,			\
+		.bm_podf = BM_##r##_##b##_PODF,			\
+	}
+
+DEF_CLK_DIV2(ssi1_div,		&ssi1_clk,		CS1CDR,	SSI1);
+DEF_CLK_DIV2(ssi3_div,		&ssi3_clk,		CS1CDR,	SSI3);
+DEF_CLK_DIV2(esai_div,		&esai_clk,		CS1CDR,	ESAI);
+DEF_CLK_DIV2(ssi2_div,		&ssi2_clk,		CS2CDR,	SSI2);
+DEF_CLK_DIV2(enfc_div,		&enfc_clk,		CS2CDR,	ENFC);
+DEF_CLK_DIV2(spdif_div,		&spdif_clk,		CDCDR,	SPDIF);
+DEF_CLK_DIV2(asrc_serial_div,	&asrc_serial_clk,	CDCDR,	ASRC_SERIAL);
+
+static struct divider *dividers[] = {
+	&arm_div,
+	&ipg_div,
+	&ahb_div,
+	&axi_div,
+	&mmdc_ch0_axi_div,
+	&mmdc_ch1_axi_div,
+	&periph_clk2_div,
+	&periph2_clk2_div,
+	&gpu2d_core_div,
+	&gpu3d_core_div,
+	&gpu3d_shader_div,
+	&ipg_perclk_div,
+	&emi_div,
+	&emi_slow_div,
+	&can_div,
+	&uart_div,
+	&usdhc1_div,
+	&usdhc2_div,
+	&usdhc3_div,
+	&usdhc4_div,
+	&vpu_div,
+	&hsi_tx_div,
+	&ipu1_di0_pre_div,
+	&ipu1_di1_pre_div,
+	&ipu2_di0_pre_div,
+	&ipu2_di1_pre_div,
+	&ipu1_div,
+	&ipu2_div,
+	&ssi1_div,
+	&ssi3_div,
+	&esai_div,
+	&ssi2_div,
+	&enfc_div,
+	&spdif_div,
+	&asrc_serial_div,
+};
+
+static unsigned long ldb_di_clk_get_rate(struct clk *clk)
+{
+	u32 val = readl_relaxed(CSCMR2);
+
+	val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
+				       BM_CSCMR2_LDB_DI1_IPU_DIV;
+	if (val)
+		return clk_get_rate(clk->parent) / 7;
+	else
+		return clk_get_rate(clk->parent) * 2 / 7;
+}
+
+static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	u32 val = readl_relaxed(CSCMR2);
+
+	if (rate * 7 <= parent_rate + parent_rate / 20)
+		val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
+	else
+		val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
+
+	writel_relaxed(val, CSCMR2);
+
+	return 0;
+}
+
+static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+
+	if (rate * 7 <= parent_rate + parent_rate / 20)
+		return parent_rate / 7;
+	else
+		return 2 * parent_rate / 7;
+}
+
+static unsigned long _clk_get_rate(struct clk *clk)
+{
+	struct divider *d;
+	u32 val, pred, podf;
+	int i, num;
+
+	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+		return ldb_di_clk_get_rate(clk);
+
+	num = ARRAY_SIZE(dividers);
+	for (i = 0; i < num; i++)
+		if (dividers[i]->clk == clk) {
+			d = dividers[i];
+			break;
+		}
+	if (i == num)
+		return clk_get_rate(clk->parent);
+
+	val = readl_relaxed(d->reg);
+	pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
+	podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
+
+	return clk_get_rate(clk->parent) / (pred * podf);
+}
+
+static int clk_busy_wait(struct clk *clk)
+{
+	int timeout = 0x100000;
+	u32 bm;
+
+	if (clk == &axi_clk)
+		bm = BM_CDHIPR_AXI_PODF_BUSY;
+	else if (clk == &ahb_clk)
+		bm = BM_CDHIPR_AHB_PODF_BUSY;
+	else if (clk == &mmdc_ch0_axi_clk)
+		bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
+	else if (clk == &periph_clk)
+		bm = BM_CDHIPR_PERIPH_SEL_BUSY;
+	else if (clk == &arm_clk)
+		bm = BM_CDHIPR_ARM_PODF_BUSY;
+	else
+		return -EINVAL;
+
+	while ((readl_relaxed(CDHIPR) & bm) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		return -EBUSY;
+
+	return 0;
+}
+
+static int _clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	struct divider *d;
+	u32 val, div, max_div, pred = 0, podf;
+	int i, num;
+
+	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+		return ldb_di_clk_set_rate(clk, rate);
+
+	num = ARRAY_SIZE(dividers);
+	for (i = 0; i < num; i++)
+		if (dividers[i]->clk == clk) {
+			d = dividers[i];
+			break;
+		}
+	if (i == num)
+		return -EINVAL;
+
+	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
+		  ((d->bm_pred >> d->bp_pred) + 1);
+
+	div = parent_rate / rate;
+	if (div == 0)
+		div++;
+
+	if ((parent_rate / div != rate) || div > max_div)
+		return -EINVAL;
+
+	if (d->bm_pred) {
+		calc_pred_podf_dividers(div, &pred, &podf);
+	} else {
+		pred = 1;
+		podf = div;
+	}
+
+	val = readl_relaxed(d->reg);
+	val &= ~(d->bm_pred | d->bm_podf);
+	val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
+	writel_relaxed(val, d->reg);
+
+	if (clk == &axi_clk || clk == &ahb_clk ||
+	    clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
+		return clk_busy_wait(clk);
+
+	return 0;
+}
+
+static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	u32 div = parent_rate / rate;
+	u32 div_max, pred = 0, podf;
+	struct divider *d;
+	int i, num;
+
+	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+		return ldb_di_clk_round_rate(clk, rate);
+
+	num = ARRAY_SIZE(dividers);
+	for (i = 0; i < num; i++)
+		if (dividers[i]->clk == clk) {
+			d = dividers[i];
+			break;
+		}
+	if (i == num)
+		return -EINVAL;
+
+	if (div == 0 || parent_rate % rate)
+		div++;
+
+	if (d->bm_pred) {
+		calc_pred_podf_dividers(div, &pred, &podf);
+		div = pred * podf;
+	} else {
+		div_max = (d->bm_podf >> d->bp_podf) + 1;
+		if (div > div_max)
+			div = div_max;
+	}
+
+	return parent_rate / div;
+}
+
+struct multiplexer {
+	struct clk *clk;
+	void __iomem *reg;
+	u32 bp;
+	u32 bm;
+	int pnum;
+	struct clk *parents[];
+};
+
+static struct multiplexer axi_mux = {
+	.clk = &axi_clk,
+	.reg = CBCDR,
+	.bp = BP_CBCDR_AXI_SEL,
+	.bm = BM_CBCDR_AXI_SEL,
+	.parents = {
+		&periph_clk,
+		&pll2_pfd_400m,
+		&pll3_pfd_540m,
+		NULL
+	},
+};
+
+static struct multiplexer periph_mux = {
+	.clk = &periph_clk,
+	.reg = CBCDR,
+	.bp = BP_CBCDR_PERIPH_CLK_SEL,
+	.bm = BM_CBCDR_PERIPH_CLK_SEL,
+	.parents = {
+		&periph_pre_clk,
+		&periph_clk2_clk,
+		NULL
+	},
+};
+
+static struct multiplexer periph_pre_mux = {
+	.clk = &periph_pre_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
+	.bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
+	.parents = {
+		&pll2_bus,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		&pll2_200m,
+		NULL
+	},
+};
+
+static struct multiplexer periph_clk2_mux = {
+	.clk = &periph_clk2_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PERIPH_CLK2_SEL,
+	.bm = BM_CBCMR_PERIPH_CLK2_SEL,
+	.parents = {
+		&pll3_usb_otg,
+		&osc_clk,
+		NULL
+	},
+};
+
+static struct multiplexer periph2_mux = {
+	.clk = &periph2_clk,
+	.reg = CBCDR,
+	.bp = BP_CBCDR_PERIPH2_CLK_SEL,
+	.bm = BM_CBCDR_PERIPH2_CLK_SEL,
+	.parents = {
+		&periph2_pre_clk,
+		&periph2_clk2_clk,
+		NULL
+	},
+};
+
+static struct multiplexer periph2_pre_mux = {
+	.clk = &periph2_pre_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
+	.bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
+	.parents = {
+		&pll2_bus,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		&pll2_200m,
+		NULL
+	},
+};
+
+static struct multiplexer periph2_clk2_mux = {
+	.clk = &periph2_clk2_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PERIPH2_CLK2_SEL,
+	.bm = BM_CBCMR_PERIPH2_CLK2_SEL,
+	.parents = {
+		&pll3_usb_otg,
+		&osc_clk,
+		NULL
+	},
+};
+
+static struct multiplexer gpu2d_axi_mux = {
+	.clk = &gpu2d_axi_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU2D_AXI_SEL,
+	.bm = BM_CBCMR_GPU2D_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer gpu3d_axi_mux = {
+	.clk = &gpu3d_axi_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU3D_AXI_SEL,
+	.bm = BM_CBCMR_GPU3D_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer gpu3d_core_mux = {
+	.clk = &gpu3d_core_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU3D_CORE_SEL,
+	.bm = BM_CBCMR_GPU3D_CORE_SEL,
+	.parents = {
+		&mmdc_ch0_axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_594m,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+static struct multiplexer gpu3d_shader_mux = {
+	.clk = &gpu3d_shader_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU3D_SHADER_SEL,
+	.bm = BM_CBCMR_GPU3D_SHADER_SEL,
+	.parents = {
+		&mmdc_ch0_axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_594m,
+		&pll3_pfd_720m,
+		NULL
+	},
+};
+
+static struct multiplexer pcie_axi_mux = {
+	.clk = &pcie_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_PCIE_AXI_SEL,
+	.bm = BM_CBCMR_PCIE_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer vdo_axi_mux = {
+	.clk = &vdo_axi_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_VDO_AXI_SEL,
+	.bm = BM_CBCMR_VDO_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&ahb_clk,
+		NULL
+	},
+};
+
+static struct multiplexer vpu_axi_mux = {
+	.clk = &vpu_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_VPU_AXI_SEL,
+	.bm = BM_CBCMR_VPU_AXI_SEL,
+	.parents = {
+		&axi_clk,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		NULL
+	},
+};
+
+static struct multiplexer gpu2d_core_mux = {
+	.clk = &gpu2d_core_clk,
+	.reg = CBCMR,
+	.bp = BP_CBCMR_GPU2D_CORE_SEL,
+	.bm = BM_CBCMR_GPU2D_CORE_SEL,
+	.parents = {
+		&axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_352m,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+#define DEF_SSI_MUX(id)							\
+	static struct multiplexer ssi##id##_mux = {			\
+		.clk = &ssi##id##_clk,					\
+		.reg = CSCMR1,						\
+		.bp = BP_CSCMR1_SSI##id##_SEL,				\
+		.bm = BM_CSCMR1_SSI##id##_SEL,				\
+		.parents = {						\
+			&pll3_pfd_508m,					\
+			&pll3_pfd_454m,					\
+			&pll4_audio,					\
+			NULL						\
+		},							\
+	}
+
+DEF_SSI_MUX(1);
+DEF_SSI_MUX(2);
+DEF_SSI_MUX(3);
+
+#define DEF_USDHC_MUX(id)						\
+	static struct multiplexer usdhc##id##_mux = {			\
+		.clk = &usdhc##id##_clk,				\
+		.reg = CSCMR1,						\
+		.bp = BP_CSCMR1_USDHC##id##_SEL,			\
+		.bm = BM_CSCMR1_USDHC##id##_SEL,			\
+		.parents = {						\
+			&pll2_pfd_400m,					\
+			&pll2_pfd_352m,					\
+			NULL						\
+		},							\
+	}
+
+DEF_USDHC_MUX(1);
+DEF_USDHC_MUX(2);
+DEF_USDHC_MUX(3);
+DEF_USDHC_MUX(4);
+
+static struct multiplexer emi_mux = {
+	.clk = &emi_clk,
+	.reg = CSCMR1,
+	.bp = BP_CSCMR1_EMI_SEL,
+	.bm = BM_CSCMR1_EMI_SEL,
+	.parents = {
+		&axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		NULL
+	},
+};
+
+static struct multiplexer emi_slow_mux = {
+	.clk = &emi_slow_clk,
+	.reg = CSCMR1,
+	.bp = BP_CSCMR1_EMI_SLOW_SEL,
+	.bm = BM_CSCMR1_EMI_SLOW_SEL,
+	.parents = {
+		&axi_clk,
+		&pll3_usb_otg,
+		&pll2_pfd_400m,
+		&pll2_pfd_352m,
+		NULL
+	},
+};
+
+static struct multiplexer esai_mux = {
+	.clk = &esai_clk,
+	.reg = CSCMR2,
+	.bp = BP_CSCMR2_ESAI_SEL,
+	.bm = BM_CSCMR2_ESAI_SEL,
+	.parents = {
+		&pll4_audio,
+		&pll3_pfd_508m,
+		&pll3_pfd_454m,
+		&pll3_usb_otg,
+		NULL
+	},
+};
+
+#define DEF_LDB_DI_MUX(id)						\
+	static struct multiplexer ldb_di##id##_mux = {			\
+		.clk = &ldb_di##id##_clk,				\
+		.reg = CS2CDR,						\
+		.bp = BP_CS2CDR_LDB_DI##id##_SEL,			\
+		.bm = BM_CS2CDR_LDB_DI##id##_SEL,			\
+		.parents = {						\
+			&pll5_video,					\
+			&pll2_pfd_352m,					\
+			&pll2_pfd_400m,					\
+			&pll3_pfd_540m,					\
+			&pll3_usb_otg,					\
+			NULL						\
+		},							\
+	}
+
+DEF_LDB_DI_MUX(0);
+DEF_LDB_DI_MUX(1);
+
+static struct multiplexer enfc_mux = {
+	.clk = &enfc_clk,
+	.reg = CS2CDR,
+	.bp = BP_CS2CDR_ENFC_SEL,
+	.bm = BM_CS2CDR_ENFC_SEL,
+	.parents = {
+		&pll2_pfd_352m,
+		&pll2_bus,
+		&pll3_usb_otg,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+static struct multiplexer spdif_mux = {
+	.clk = &spdif_clk,
+	.reg = CDCDR,
+	.bp = BP_CDCDR_SPDIF_SEL,
+	.bm = BM_CDCDR_SPDIF_SEL,
+	.parents = {
+		&pll4_audio,
+		&pll3_pfd_508m,
+		&pll3_pfd_454m,
+		&pll3_usb_otg,
+		NULL
+	},
+};
+
+static struct multiplexer asrc_serial_mux = {
+	.clk = &asrc_serial_clk,
+	.reg = CDCDR,
+	.bp = BP_CDCDR_ASRC_SERIAL_SEL,
+	.bm = BM_CDCDR_ASRC_SERIAL_SEL,
+	.parents = {
+		&pll4_audio,
+		&pll3_pfd_508m,
+		&pll3_pfd_454m,
+		&pll3_usb_otg,
+		NULL
+	},
+};
+
+static struct multiplexer hsi_tx_mux = {
+	.clk = &hsi_tx_clk,
+	.reg = CDCDR,
+	.bp = BP_CDCDR_HSI_TX_SEL,
+	.bm = BM_CDCDR_HSI_TX_SEL,
+	.parents = {
+		&pll3_120m,
+		&pll2_pfd_400m,
+		NULL
+	},
+};
+
+#define DEF_IPU_DI_PRE_MUX(r, i, d)					\
+	static struct multiplexer ipu##i##_di##d##_pre_mux = {		\
+		.clk = &ipu##i##_di##d##_pre_clk,			\
+		.reg = r,						\
+		.bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL,		\
+		.bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL,		\
+		.parents = {						\
+			&mmdc_ch0_axi_clk,				\
+			&pll3_usb_otg,					\
+			&pll5_video,					\
+			&pll2_pfd_352m,					\
+			&pll2_pfd_400m,					\
+			&pll3_pfd_540m,					\
+			NULL						\
+		},							\
+	}
+
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_DI_MUX(r, i, d)						\
+	static struct multiplexer ipu##i##_di##d##_mux = {		\
+		.clk = &ipu##i##_di##d##_clk,				\
+		.reg = r,						\
+		.bp = BP_##r##_IPU##i##_DI##d##_SEL,			\
+		.bm = BM_##r##_IPU##i##_DI##d##_SEL,			\
+		.parents = {						\
+			&ipu##i##_di##d##_pre_clk,			\
+			&dummy_clk,					\
+			&dummy_clk,					\
+			&ldb_di0_clk,					\
+			&ldb_di1_clk,					\
+			NULL						\
+		},							\
+	}
+
+DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_MUX(id)							\
+	static struct multiplexer ipu##id##_mux = {			\
+		.clk = &ipu##id##_clk,					\
+		.reg = CSCDR3,						\
+		.bp = BP_CSCDR3_IPU##id##_HSP_SEL,			\
+		.bm = BM_CSCDR3_IPU##id##_HSP_SEL,			\
+		.parents = {						\
+			&mmdc_ch0_axi_clk,				\
+			&pll2_pfd_400m,					\
+			&pll3_120m,					\
+			&pll3_pfd_540m,					\
+			NULL						\
+		},							\
+	}
+
+DEF_IPU_MUX(1);
+DEF_IPU_MUX(2);
+
+static struct multiplexer *multiplexers[] = {
+	&axi_mux,
+	&periph_mux,
+	&periph_pre_mux,
+	&periph_clk2_mux,
+	&periph2_mux,
+	&periph2_pre_mux,
+	&periph2_clk2_mux,
+	&gpu2d_axi_mux,
+	&gpu3d_axi_mux,
+	&gpu3d_core_mux,
+	&gpu3d_shader_mux,
+	&pcie_axi_mux,
+	&vdo_axi_mux,
+	&vpu_axi_mux,
+	&gpu2d_core_mux,
+	&ssi1_mux,
+	&ssi2_mux,
+	&ssi3_mux,
+	&usdhc1_mux,
+	&usdhc2_mux,
+	&usdhc3_mux,
+	&usdhc4_mux,
+	&emi_mux,
+	&emi_slow_mux,
+	&esai_mux,
+	&ldb_di0_mux,
+	&ldb_di1_mux,
+	&enfc_mux,
+	&spdif_mux,
+	&asrc_serial_mux,
+	&hsi_tx_mux,
+	&ipu1_di0_pre_mux,
+	&ipu1_di0_mux,
+	&ipu1_di1_pre_mux,
+	&ipu1_di1_mux,
+	&ipu2_di0_pre_mux,
+	&ipu2_di0_mux,
+	&ipu2_di1_pre_mux,
+	&ipu2_di1_mux,
+	&ipu1_mux,
+	&ipu2_mux,
+};
+
+static int _clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	struct multiplexer *m;
+	int i, num;
+	u32 val;
+
+	num = ARRAY_SIZE(multiplexers);
+	for (i = 0; i < num; i++)
+		if (multiplexers[i]->clk == clk) {
+			m = multiplexers[i];
+			break;
+		}
+	if (i == num)
+		return -EINVAL;
+
+	i = 0;
+	while (m->parents[i]) {
+		if (parent == m->parents[i])
+			break;
+		i++;
+	}
+	if (!m->parents[i])
+		return -EINVAL;
+
+	val = readl_relaxed(m->reg);
+	val &= ~m->bm;
+	val |= i << m->bp;
+	writel_relaxed(val, m->reg);
+
+	if (clk == &periph_clk)
+		return clk_busy_wait(clk);
+
+	return 0;
+}
+
+#define DEF_NG_CLK(name, p)				\
+	static struct clk name = {			\
+		.get_rate	= _clk_get_rate,	\
+		.set_rate	= _clk_set_rate,	\
+		.round_rate	= _clk_round_rate,	\
+		.set_parent	= _clk_set_parent,	\
+		.parent		= p,			\
+	}
+
+DEF_NG_CLK(periph_clk2_clk,	&osc_clk);
+DEF_NG_CLK(periph_pre_clk,	&pll2_bus);
+DEF_NG_CLK(periph_clk,		&periph_pre_clk);
+DEF_NG_CLK(periph2_clk2_clk,	&osc_clk);
+DEF_NG_CLK(periph2_pre_clk,	&pll2_bus);
+DEF_NG_CLK(periph2_clk,		&periph2_pre_clk);
+DEF_NG_CLK(axi_clk,		&periph_clk);
+DEF_NG_CLK(emi_clk,		&axi_clk);
+DEF_NG_CLK(arm_clk,		&pll1_sw_clk);
+DEF_NG_CLK(ahb_clk,		&periph_clk);
+DEF_NG_CLK(ipg_clk,		&ahb_clk);
+DEF_NG_CLK(ipg_perclk,		&ipg_clk);
+DEF_NG_CLK(ipu1_di0_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(ipu1_di1_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di0_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di1_pre_clk,	&pll3_pfd_540m);
+DEF_NG_CLK(asrc_serial_clk,	&pll3_usb_otg);
+
+#define DEF_CLK(name, er, es, p, s)			\
+	static struct clk name = {			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.enable		= _clk_enable,		\
+		.disable	= _clk_disable,		\
+		.get_rate	= _clk_get_rate,	\
+		.set_rate	= _clk_set_rate,	\
+		.round_rate	= _clk_round_rate,	\
+		.set_parent	= _clk_set_parent,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
+DEF_CLK(aips_tz1_clk,	  CCGR0, CG0,  &ahb_clk,	  NULL);
+DEF_CLK(aips_tz2_clk,	  CCGR0, CG1,  &ahb_clk,	  NULL);
+DEF_CLK(apbh_dma_clk,	  CCGR0, CG2,  &ahb_clk,	  NULL);
+DEF_CLK(asrc_clk,	  CCGR0, CG3,  &pll4_audio,	  NULL);
+DEF_CLK(can1_serial_clk,  CCGR0, CG8,  &pll3_usb_otg,	  NULL);
+DEF_CLK(can1_clk,	  CCGR0, CG7,  &pll3_usb_otg,	  &can1_serial_clk);
+DEF_CLK(can2_serial_clk,  CCGR0, CG10, &pll3_usb_otg,	  NULL);
+DEF_CLK(can2_clk,	  CCGR0, CG9,  &pll3_usb_otg,	  &can2_serial_clk);
+DEF_CLK(ecspi1_clk,	  CCGR1, CG0,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi2_clk,	  CCGR1, CG1,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi3_clk,	  CCGR1, CG2,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi4_clk,	  CCGR1, CG3,  &pll3_60m,	  NULL);
+DEF_CLK(ecspi5_clk,	  CCGR1, CG4,  &pll3_60m,	  NULL);
+DEF_CLK(enet_clk,	  CCGR1, CG5,  &ipg_clk,	  NULL);
+DEF_CLK(esai_clk,	  CCGR1, CG8,  &pll3_usb_otg,	  NULL);
+DEF_CLK(gpt_serial_clk,	  CCGR1, CG11, &ipg_perclk,	  NULL);
+DEF_CLK(gpt_clk,	  CCGR1, CG10, &ipg_perclk,	  &gpt_serial_clk);
+DEF_CLK(gpu2d_core_clk,	  CCGR1, CG12, &pll2_pfd_352m,	  &gpu2d_axi_clk);
+DEF_CLK(gpu3d_core_clk,	  CCGR1, CG13, &pll2_pfd_594m,	  &gpu3d_axi_clk);
+DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m,	  &gpu3d_axi_clk);
+DEF_CLK(hdmi_iahb_clk,	  CCGR2, CG0,  &ahb_clk,	  NULL);
+DEF_CLK(hdmi_isfr_clk,	  CCGR2, CG2,  &pll3_pfd_540m,	  &hdmi_iahb_clk);
+DEF_CLK(i2c1_clk,	  CCGR2, CG3,  &ipg_perclk,	  NULL);
+DEF_CLK(i2c2_clk,	  CCGR2, CG4,  &ipg_perclk,	  NULL);
+DEF_CLK(i2c3_clk,	  CCGR2, CG5,  &ipg_perclk,	  NULL);
+DEF_CLK(iim_clk,	  CCGR2, CG6,  &ipg_clk,	  NULL);
+DEF_CLK(enfc_clk,	  CCGR2, CG7,  &pll2_pfd_352m,	  NULL);
+DEF_CLK(ipu1_clk,	  CCGR3, CG0,  &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu1_di0_clk,	  CCGR3, CG1,  &ipu1_di0_pre_clk, NULL);
+DEF_CLK(ipu1_di1_clk,	  CCGR3, CG2,  &ipu1_di1_pre_clk, NULL);
+DEF_CLK(ipu2_clk,	  CCGR3, CG3,  &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu2_di0_clk,	  CCGR3, CG4,  &ipu2_di0_pre_clk, NULL);
+DEF_CLK(ipu2_di1_clk,	  CCGR3, CG5,  &ipu2_di1_pre_clk, NULL);
+DEF_CLK(ldb_di0_clk,	  CCGR3, CG6,  &pll3_pfd_540m,	  NULL);
+DEF_CLK(ldb_di1_clk,	  CCGR3, CG7,  &pll3_pfd_540m,	  NULL);
+DEF_CLK(hsi_tx_clk,	  CCGR3, CG8,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(mlb_clk,	  CCGR3, CG9,  &pll6_mlb,	  NULL);
+DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk,	  NULL);
+DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk,	  &mmdc_ch0_ipg_clk);
+DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk,	  NULL);
+DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk,	  &mmdc_ch1_ipg_clk);
+DEF_CLK(openvg_axi_clk,   CCGR3, CG13, &axi_clk,	  NULL);
+DEF_CLK(pwm1_clk,	  CCGR4, CG8,  &ipg_perclk,	  NULL);
+DEF_CLK(pwm2_clk,	  CCGR4, CG9,  &ipg_perclk,	  NULL);
+DEF_CLK(pwm3_clk,	  CCGR4, CG10, &ipg_perclk,	  NULL);
+DEF_CLK(pwm4_clk,	  CCGR4, CG11, &ipg_perclk,	  NULL);
+DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk,	  NULL);
+DEF_CLK(gpmi_bch_clk,	  CCGR4, CG13, &usdhc4_clk,	  &gpmi_bch_apb_clk);
+DEF_CLK(gpmi_apb_clk,	  CCGR4, CG15, &usdhc3_clk,	  &gpmi_bch_clk);
+DEF_CLK(gpmi_io_clk,	  CCGR4, CG14, &enfc_clk,	  &gpmi_apb_clk);
+DEF_CLK(sdma_clk,	  CCGR5, CG3,  &ahb_clk,	  NULL);
+DEF_CLK(spba_clk,	  CCGR5, CG6,  &ipg_clk,	  NULL);
+DEF_CLK(spdif_clk,	  CCGR5, CG7,  &pll3_usb_otg,	  &spba_clk);
+DEF_CLK(ssi1_clk,	  CCGR5, CG9,  &pll3_pfd_508m,	  NULL);
+DEF_CLK(ssi2_clk,	  CCGR5, CG10, &pll3_pfd_508m,	  NULL);
+DEF_CLK(ssi3_clk,	  CCGR5, CG11, &pll3_pfd_508m,	  NULL);
+DEF_CLK(uart_serial_clk,  CCGR5, CG13, &pll3_usb_otg,	  NULL);
+DEF_CLK(uart_clk,	  CCGR5, CG12, &pll3_80m,	  &uart_serial_clk);
+DEF_CLK(usboh3_clk,	  CCGR6, CG0,  &ipg_clk,	  NULL);
+DEF_CLK(usdhc1_clk,	  CCGR6, CG1,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(usdhc2_clk,	  CCGR6, CG2,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(usdhc3_clk,	  CCGR6, CG3,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(usdhc4_clk,	  CCGR6, CG4,  &pll2_pfd_400m,	  NULL);
+DEF_CLK(emi_slow_clk,	  CCGR6, CG5,  &axi_clk,	  NULL);
+DEF_CLK(vdo_axi_clk,	  CCGR6, CG6,  &axi_clk,	  NULL);
+DEF_CLK(vpu_clk,	  CCGR6, CG7,  &axi_clk,	  NULL);
+
+static int pcie_clk_enable(struct clk *clk)
+{
+	u32 val;
+
+	val = readl_relaxed(PLL8_ENET);
+	val |= BM_PLL_ENET_EN_PCIE;
+	writel_relaxed(val, PLL8_ENET);
+
+	return _clk_enable(clk);
+}
+
+static void pcie_clk_disable(struct clk *clk)
+{
+	u32 val;
+
+	_clk_disable(clk);
+
+	val = readl_relaxed(PLL8_ENET);
+	val &= BM_PLL_ENET_EN_PCIE;
+	writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk pcie_clk = {
+	.enable_reg = CCGR4,
+	.enable_shift = CG0,
+	.enable = pcie_clk_enable,
+	.disable = pcie_clk_disable,
+	.set_parent = _clk_set_parent,
+	.parent = &axi_clk,
+	.secondary = &pll8_enet,
+};
+
+static int sata_clk_enable(struct clk *clk)
+{
+	u32 val;
+
+	val = readl_relaxed(PLL8_ENET);
+	val |= BM_PLL_ENET_EN_SATA;
+	writel_relaxed(val, PLL8_ENET);
+
+	return _clk_enable(clk);
+}
+
+static void sata_clk_disable(struct clk *clk)
+{
+	u32 val;
+
+	_clk_disable(clk);
+
+	val = readl_relaxed(PLL8_ENET);
+	val &= BM_PLL_ENET_EN_SATA;
+	writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk sata_clk = {
+	.enable_reg = CCGR5,
+	.enable_shift = CG2,
+	.enable = sata_clk_enable,
+	.disable = sata_clk_disable,
+	.parent = &ipg_clk,
+	.secondary = &pll8_enet,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	}
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
+	_REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
+	_REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
+	_REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
+	_REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
+	_REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
+	_REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
+	_REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
+	_REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
+	_REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
+	_REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
+	_REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
+	_REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
+	_REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
+	_REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
+	_REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
+	_REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk),
+	_REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
+	_REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
+	_REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
+	_REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
+	_REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
+	_REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
+	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
+	_REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
+	_REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
+	_REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
+	_REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
+	_REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
+	_REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
+	_REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
+	_REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
+	_REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+};
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	u32 val = readl_relaxed(CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		break;
+	default:
+		return -EINVAL;
+	}
+	writel_relaxed(val, CLPCR);
+
+	return 0;
+}
+
+static struct map_desc imx6q_clock_desc[] = {
+	imx_map_entry(MX6Q, CCM, MT_DEVICE),
+	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
+};
+
+int __init mx6q_clocks_init(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int i, irq;
+
+	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		u32 rate;
+		if (of_property_read_u32(np, "clock-frequency", &rate))
+			continue;
+
+		if (of_device_is_compatible(np, "fsl,imx-ckil"))
+			external_low_reference = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+			external_high_reference = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-osc"))
+			oscillator_reference = rate;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/* only keep necessary clocks on */
+	writel_relaxed(0x3 << CG0  | 0x3 << CG1  | 0x3 << CG2,	CCGR0);
+	writel_relaxed(0x3 << CG8  | 0x3 << CG9  | 0x3 << CG10,	CCGR2);
+	writel_relaxed(0x3 << CG10 | 0x3 << CG12,		CCGR3);
+	writel_relaxed(0x3 << CG4  | 0x3 << CG6  | 0x3 << CG7,	CCGR4);
+	writel_relaxed(0x3 << CG0,				CCGR5);
+	writel_relaxed(0,					CCGR6);
+	writel_relaxed(0,					CCGR7);
+
+	clk_enable(&uart_clk);
+	clk_enable(&mmdc_ch0_axi_clk);
+
+	clk_set_rate(&pll4_audio, FREQ_650M);
+	clk_set_rate(&pll5_video, FREQ_650M);
+	clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
+	clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
+	clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
+	clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
+	clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
+	clk_set_rate(&gpu3d_core_clk, FREQ_528M);
+	clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
+	clk_set_rate(&asrc_serial_clk, 1500000);
+	clk_set_rate(&enfc_clk, 11000000);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(&gpt_clk, base, irq);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
new file mode 100644
index 00000000000..e1537f9e45b
--- /dev/null
+++ b/arch/arm/mach-imx/gpc.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1		0x008
+#define GPC_PGC_CPU_PDN		0x2a0
+
+#define IMR_NUM			4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Tell GPC to power off ARM core when suspend */
+	writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+		writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+	}
+}
+
+void imx_gpc_post_resume(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Keep ARM core powered on for other low-power modes */
+	writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	unsigned int idx = d->irq / 32 - 1;
+	u32 mask;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return -EINVAL;
+
+	mask = 1 << d->irq % 32;
+	gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+				  gpc_wake_irqs[idx] & ~mask;
+
+	return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val &= ~(1 << d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val |= 1 << (d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+	gpc_base = of_iomap(np, 0);
+	WARN_ON(!gpc_base);
+
+	/* Register GPC as the secondary interrupt controller behind GIC */
+	gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+	gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+	gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
new file mode 100644
index 00000000000..6229efbc70c
--- /dev/null
+++ b/arch/arm/mach-imx/head-v7.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+	.section ".text.head", "ax"
+	__CPUINIT
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+/*
+ * The following code is located into the .data section.  This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+	.data
+	.align
+
+	.macro	pl310_resume
+	ldr	r2, phys_l2x0_saved_regs
+	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
+	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
+	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
+	mov	r1, #0x1
+	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
+	.endm
+
+ENTRY(v7_cpu_resume)
+	bl	v7_invalidate_l1
+	pl310_resume
+	b	cpu_resume
+ENDPROC(v7_cpu_resume)
+
+	.globl	phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+        .long   0
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
new file mode 100644
index 00000000000..89493abd497
--- /dev/null
+++ b/arch/arm/mach-imx/hotplug.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <asm/cacheflush.h>
+#include <mach/common.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	flush_cache_all();
+	imx_enable_cpu(cpu, false);
+	cpu_do_idle();
+
+	/* We should never return from idle */
+	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
new file mode 100644
index 00000000000..d4ab6f29a76
--- /dev/null
+++ b/arch/arm/mach-imx/lluart.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
+	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
+	.length		= MX6Q_UART4_SIZE,
+	.type		= MT_DEVICE,
+#endif
+};
+
+void __init imx_lluart_map_io(void)
+{
+	if (imx_lluart_desc.virtual)
+		iotable_init(&imx_lluart_desc, 1);
+}
diff --git a/arch/arm/mach-imx/localtimer.c b/arch/arm/mach-imx/localtimer.c
new file mode 100644
index 00000000000..3a163515d41
--- /dev/null
+++ b/arch/arm/mach-imx/localtimer.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+	if (!twd_base) {
+		twd_base = of_iomap(np, 0);
+		WARN_ON(!twd_base);
+	}
+	evt->irq = irq_of_parse_and_map(np, 0);
+	twd_timer_setup(evt);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
new file mode 100644
index 00000000000..8bf5fa34948
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+	imx_lluart_map_io();
+	imx_scu_map_io();
+}
+
+static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+				struct device_node *interrupt_parent)
+{
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+				   32 * 7; /* imx6q gets 7 gpio ports */
+
+	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
+	{ /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+	l2x0_of_init(0, ~0UL);
+	imx_src_init();
+	imx_gpc_init();
+	of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+	mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+	.init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+	"fsl,imx6q-sabreauto",
+	NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+	.map_io		= imx6q_map_io,
+	.init_irq	= imx6q_init_irq,
+	.handle_irq	= imx6q_handle_irq,
+	.timer		= &imx6q_timer,
+	.init_machine	= imx6q_init_machine,
+	.dt_compat	= imx6q_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
new file mode 100644
index 00000000000..c461e98496c
--- /dev/null
+++ b/arch/arm/mach-imx/mmdc.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#define MMDC_MAPSR		0x404
+#define BP_MMDC_MAPSR_PSD	0
+#define BP_MMDC_MAPSR_PSS	4
+
+static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *mmdc_base, *reg;
+	u32 val;
+	int timeout = 0x400;
+
+	mmdc_base = of_iomap(np, 0);
+	WARN_ON(!mmdc_base);
+
+	reg = mmdc_base + MMDC_MAPSR;
+
+	/* Enable automatic power saving */
+	val = readl_relaxed(reg);
+	val &= ~(1 << BP_MMDC_MAPSR_PSD);
+	writel_relaxed(val, reg);
+
+	/* Ensure it's successfully enabled */
+	while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout)) {
+		pr_warn("%s: failed to enable automatic power saving\n",
+			__func__);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static struct of_device_id imx_mmdc_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-mmdc", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver imx_mmdc_driver = {
+	.driver		= {
+		.name	= "imx-mmdc",
+		.owner	= THIS_MODULE,
+		.of_match_table = imx_mmdc_dt_ids,
+	},
+	.probe		= imx_mmdc_probe,
+};
+
+static int __init imx_mmdc_init(void)
+{
+	return platform_driver_register(&imx_mmdc_driver);
+}
+postcore_initcall(imx_mmdc_init);
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
new file mode 100644
index 00000000000..ab98c6fec9e
--- /dev/null
+++ b/arch/arm/mach-imx/platsmp.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/page.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __iomem *scu_base;
+
+static struct map_desc scu_io_desc __initdata = {
+	/* .virtual and .pfn are run-time assigned */
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+};
+
+void __init imx_scu_map_io(void)
+{
+	unsigned long base;
+
+	/* Get SCU base */
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+	scu_io_desc.virtual = IMX_IO_P2V(base);
+	scu_io_desc.pfn = __phys_to_pfn(base);
+	iotable_init(&scu_io_desc, 1);
+
+	scu_base = IMX_IO_ADDRESS(base);
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	imx_set_cpu_jump(cpu, v7_secondary_startup);
+	imx_enable_cpu(cpu, true);
+	return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	int i, ncores;
+
+	ncores = scu_get_core_count(scu_base);
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void imx_smp_prepare(void)
+{
+	scu_enable(scu_base);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	imx_smp_prepare();
+}
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
new file mode 100644
index 00000000000..f20f191d7cc
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+extern unsigned long phys_l2x0_saved_regs;
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+	cpu_do_idle();
+	return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		imx6q_set_lpm(STOP_POWER_OFF);
+		imx_gpc_pre_suspend();
+		imx_set_cpu_jump(0, v7_cpu_resume);
+		/* Zzz ... */
+		cpu_suspend(0, imx6q_suspend_finish);
+		imx_smp_prepare();
+		imx_gpc_post_resume();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+	.enter = imx6q_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_init(void)
+{
+	/*
+	 * The l2x0 core code provides an infrastucture to save and restore
+	 * l2x0 registers across suspend/resume cycle.  But because imx6q
+	 * retains L2 content during suspend and needs to resume L2 before
+	 * MMU is enabled, it can only utilize register saving support and
+	 * have to take care of restoring on its own.  So we save physical
+	 * address of the data structure used by l2x0 core to save registers,
+	 * and later restore the necessary ones in imx6q resume entry.
+	 */
+	phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
+
+	suspend_set_ops(&imx6q_pm_ops);
+}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
new file mode 100644
index 00000000000..36cacbd0dcc
--- /dev/null
+++ b/arch/arm/mach-imx/src.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/unified.h>
+
+#define SRC_SCR				0x000
+#define SRC_GPR1			0x020
+#define BP_SRC_SCR_CORE1_RST		14
+#define BP_SRC_SCR_CORE1_ENABLE		22
+
+static void __iomem *src_base;
+
+void imx_enable_cpu(int cpu, bool enable)
+{
+	u32 mask, val;
+
+	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+	val = readl_relaxed(src_base + SRC_SCR);
+	val = enable ? val | mask : val & ~mask;
+	writel_relaxed(val, src_base + SRC_SCR);
+}
+
+void imx_set_cpu_jump(int cpu, void *jump_addr)
+{
+	writel_relaxed(BSYM(virt_to_phys(jump_addr)),
+		       src_base + SRC_GPR1 + cpu * 8);
+}
+
+void __init imx_src_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+	src_base = of_iomap(np, 0);
+	WARN_ON(!src_base);
+}
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 714570d8366..90c6b7836ad 100644
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -14,17 +14,9 @@
 #include <mach/mx23.h>
 #include <mach/mx28.h>
 
-#ifdef CONFIG_SOC_IMX23
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#ifdef CONFIG_DEBUG_IMX23_UART
 #define UART_PADDR	MX23_DUART_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX28_UART)
 #define UART_PADDR	MX28_DUART_BASE_ADDR
 #endif
 
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index fb4901c4ef0..8cc372dc66a 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -10,23 +10,10 @@
  * published by the Free Software Foundation.
  */
 
-#if defined(CONFIG_MACH_REALVIEW_EB) || \
-    defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8) || \
-    defined(CONFIG_MACH_REALVIEW_PBX)
-#ifndef DEBUG_LL_UART_OFFSET
+#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
 #define DEBUG_LL_UART_OFFSET	0x00009000
-#elif DEBUG_LL_UART_OFFSET != 0x00009000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
-#endif
-
-#ifdef CONFIG_MACH_REALVIEW_PB1176
-#ifndef DEBUG_LL_UART_OFFSET
+#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
 #define DEBUG_LL_UART_OFFSET	0x0010c000
-#elif DEBUG_LL_UART_OFFSET != 0x0010c000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
 #endif
 
 #ifndef DEBUG_LL_UART_OFFSET
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7d5fff7b363..67f75a0b66d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -819,7 +819,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
+		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
 		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
 		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
 		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 502e45f0317..2704951d8cd 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -6,7 +6,7 @@ menu "Freescale MXC Implementations"
 
 choice
 	prompt "Freescale CPU family:"
-	default ARCH_MX3
+	default ARCH_IMX_V6_V7
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
@@ -16,10 +16,13 @@ config ARCH_IMX_V4_V5
 	  This enables support for systems based on the Freescale i.MX ARMv4
 	  and ARMv5 SoCs
 
-config ARCH_MX3
-	bool "MX3-based"
+config ARCH_IMX_V6_V7
+	bool "i.MX3, i.MX6"
+	select AUTO_ZRELADDR if !ZBOOT_ROM
+	select ARM_PATCH_PHYS_VIRT
 	help
-	  This enables support for systems based on the Freescale i.MX3 family
+	  This enables support for systems based on the Freescale i.MX3 and i.MX6
+	  family.
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index d53c35fe2ea..b9f0f5f499a 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,7 @@
 # Common support
 obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
 
-# MX51 uses the TZIC interrupt controller, older platforms use AVIC
+obj-$(CONFIG_ARM_GIC) += gic.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
new file mode 100644
index 00000000000..b3b8eed263b
--- /dev/null
+++ b/arch/arm/plat-mxc/gic.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <asm/exception.h>
+#include <asm/localtimer.h>
+#include <asm/hardware/gic.h>
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+
+	do {
+		irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
+		irqnr = irqstat & 0x3ff;
+		if (irqnr == 1023)
+			break;
+
+		if (irqnr > 29 && irqnr < 1021)
+			handle_IRQ(irqnr, regs);
+#ifdef CONFIG_SMP
+		else if (irqnr < 16) {
+			writel_relaxed(irqstat, gic_cpu_base_addr +
+						GIC_CPU_EOI);
+			handle_IPI(irqnr, regs);
+		}
+#endif
+#ifdef CONFIG_LOCAL_TIMERS
+		else if (irqnr == 29) {
+			writel_relaxed(irqstat, gic_cpu_base_addr +
+						GIC_CPU_EOI);
+			handle_local_timer(regs);
+		}
+#endif
+	} while (1);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index c850af3650e..83b745a5e1b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -13,6 +13,7 @@
 
 struct platform_device;
 struct clk;
+enum mxc_cpu_pwr_mode;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
@@ -66,6 +67,7 @@ extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx51_clocks_init_dt(void);
 extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);
@@ -88,6 +90,7 @@ extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
+void gic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
@@ -98,10 +101,36 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx50_handle_irq tzic_handle_irq
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
+#define imx6q_handle_irq gic_handle_irq
 
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
 extern void imx51_babbage_common_init(void);
 extern void imx53_ard_common_init(void);
 extern void imx53_evk_common_init(void);
 extern void imx53_qsb_common_init(void);
 extern void imx53_smd_common_init(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_pm_init(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index a3045937fc2..6e192c4a391 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -12,44 +12,20 @@
  */
 #include <mach/hardware.h>
 
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
 #define UART_PADDR	MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
 #define UART_PADDR	MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR	MX6Q_UART4_BASE_ADDR
 #endif
 
 #define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 842fbcb0d6c..9fe0dfcf4e7 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -22,3 +22,9 @@
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 	.endm
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	.endm
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	.endm
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index eba3118adfb..a599f01f8b9 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -91,6 +91,11 @@
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
+ * mx6q:
+ *	SCU	0x00a00000+0x001000	->	0xf4000000+0x001000
+ *	CCM	0x020c4000+0x004000	->	0xf42c4000+0x004000
+ *	ANATOP	0x020c8000+0x001000	->	0xf42c8000+0x001000
+ *	UART4	0x021f0000+0x004000	->	0xf42f0000+0x004000
  */
 #define IMX_IO_P2V(x)	(						\
 			0xf4000000 +					\
@@ -102,6 +107,7 @@
 
 #include <mach/mxc.h>
 
+#include <mach/mx6q.h>
 #include <mach/mx50.h>
 #include <mach/mx51.h>
 #include <mach/mx53.h>
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 00e812bbd81..fd9efb04465 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -14,9 +14,15 @@
 #include <asm-generic/gpio.h>
 
 /*
- * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
+ * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
+ * have 128 IRQs, and those with AVIC have 64.
+ *
+ * To support single image, the biggest number should be defined on
+ * top of the list.
  */
-#ifdef CONFIG_MXC_TZIC
+#if defined CONFIG_ARM_GIC
+#define MXC_INTERNAL_IRQS	160
+#elif defined CONFIG_MXC_TZIC
 #define MXC_INTERNAL_IRQS	128
 #else
 #define MXC_INTERNAL_IRQS	64
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
new file mode 100644
index 00000000000..254a561a279
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x)		IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR		0x00a00000
+#define MX6Q_SCU_SIZE			0x1000
+#define MX6Q_CCM_BASE_ADDR		0x020c4000
+#define MX6Q_CCM_SIZE			0x4000
+#define MX6Q_ANATOP_BASE_ADDR		0x020c8000
+#define MX6Q_ANATOP_SIZE		0x1000
+#define MX6Q_UART4_BASE_ADDR		0x021f0000
+#define MX6Q_UART4_SIZE			0x4000
+
+#endif	/* __MACH_MX6Q_H__ */
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e10659e4b..49b14b1a7ab 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -367,4 +367,11 @@ config SAMSUNG_PD
 	help
 	  Say Y here if you want to control Power Domain by Runtime PM.
 
+config DEBUG_S3C_UART
+	depends on PLAT_SAMSUNG
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+
 endif