Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  PCMCIA: fix pxa2xx_lubbock modular build error
  [ARM] Update mach-types
  [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c
  [ARM] pxa/cm-x300: add PWM backlight support
  revert "[ARM] pxa/cm-x300: add PWM backlight support"
  ARM: use flush_kernel_dcache_area() for dmabounce
  ARM: add size argument to __cpuc_flush_dcache_page
  ARM: 5848/1: kill flush_ioremap_region()
  ARM: cache-l2x0: make better use of background cache handling
  ARM: cache-l2x0: avoid taking spinlock for every iteration
  [ARM] Kirkwood: Add LaCie Network Space v2 support
  ARM: dove: fix the mm mmu flags of the pj4 procinfo

35 files changed, 593 insertions, 159 deletions

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 5a375e5fef2..bc90364a96c 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -308,15 +308,11 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
 			memcpy(ptr, buf->safe, size);
 
 			/*
-			 * DMA buffers must have the same cache properties
-			 * as if they were really used for DMA - which means
-			 * data must be written back to RAM.  Note that
-			 * we don't use dmac_flush_range() here for the
-			 * bidirectional case because we know the cache
-			 * lines will be coherent with the data written.
+			 * Since we may have written to a page cache page,
+			 * we need to ensure that the data will be coherent
+			 * with user mappings.
 			 */
-			dmac_clean_range(ptr, ptr + size);
-			outer_clean_range(__pa(ptr), __pa(ptr) + size);
+			__cpuc_flush_kernel_dcache_area(ptr, size);
 		}
 		free_safe_buffer(dev->archdata.dmabounce, buf);
 	}
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 73eceb87e58..730aefcfbee 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -211,7 +211,7 @@ struct cpu_cache_fns {
 
 	void (*coherent_kern_range)(unsigned long, unsigned long);
 	void (*coherent_user_range)(unsigned long, unsigned long);
-	void (*flush_kern_dcache_page)(void *);
+	void (*flush_kern_dcache_area)(void *, size_t);
 
 	void (*dma_inv_range)(const void *, const void *);
 	void (*dma_clean_range)(const void *, const void *);
@@ -236,7 +236,7 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_flush_user_range		cpu_cache.flush_user_range
 #define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
 #define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
-#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
+#define __cpuc_flush_dcache_area	cpu_cache.flush_kern_dcache_area
 
 /*
  * These are private to the dma-mapping API.  Do not use directly.
@@ -255,14 +255,14 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
 #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
 #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
+#define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
 
 extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
 extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
 extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
-extern void __cpuc_flush_dcache_page(void *);
+extern void __cpuc_flush_dcache_area(void *, size_t);
 
 /*
  * These are private to the dma-mapping API.  Do not use directly.
@@ -448,7 +448,7 @@ static inline void flush_kernel_dcache_page(struct page *page)
 {
 	/* highmem pages are always flushed upon kunmap already */
 	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
-		__cpuc_flush_dcache_page(page_address(page));
+		__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
 
 #define flush_dcache_mmap_lock(mapping) \
@@ -465,13 +465,6 @@ static inline void flush_kernel_dcache_page(struct page *page)
  */
 #define flush_icache_page(vma,page)	do { } while (0)
 
-static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
-	unsigned offset, size_t size)
-{
-	const void *start = (void __force *)virt + offset;
-	dmac_inv_range(start, start + size);
-}
-
 /*
  * flush_cache_vmap() is used when creating mappings (eg, via vmap,
  * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 8bf09ae5b34..f6c6196a51f 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -52,6 +52,12 @@ config MACH_OPENRD_BASE
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Base Board.
 
+config MACH_NETSPACE_V2
+	bool "LaCie Network Space v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Network Space v2 NAS.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9f2f67b2b63..d4d7f53b0fb 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
+obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
new file mode 100644
index 00000000000..9a064065beb
--- /dev/null
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -0,0 +1,325 @@
+/*
+ * arch/arm/mach-kirkwood/netspace_v2-setup.c
+ *
+ * LaCie Network Space v2 board setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <plat/time.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition netspace_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data netspace_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= netspace_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(netspace_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &netspace_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netspace_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+#define NETSPACE_V2_GPIO_SATA0_POWER	16
+#define NETSPACE_V2_GPIO_SATA1_POWER	17
+
+static void __init netspace_v2_sata_power_init(void)
+{
+	int err;
+
+	err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
+	if (err == 0) {
+		err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
+		if (err)
+			gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
+	}
+	if (err)
+		pr_err("netspace_v2: failed to setup SATA0 power\n");
+}
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETSPACE_V2_PUSH_BUTTON		32
+
+static struct gpio_keys_button netspace_v2_buttons[] = {
+	[0] = {
+		.code		= KEY_POWER,
+		.gpio		= NETSPACE_V2_PUSH_BUTTON,
+		.desc		= "Power push button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data netspace_v2_button_data = {
+	.buttons	= netspace_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(netspace_v2_buttons),
+};
+
+static struct platform_device netspace_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data 	= &netspace_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to a CPLD and can blink in relation with the
+ * SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ *  cmd_led   |  slow_led  | /SATA active | LED state
+ *            |            |              |
+ *     1      |     0      |      x       |  off
+ *     -      |     1      |      x       |  on
+ *     0      |     0      |      1       |  on
+ *     0      |     0      |      0       |  blink (rate 300ms)
+ */
+
+#define NETSPACE_V2_GPIO_RED_LED	12
+#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
+#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
+
+
+static struct gpio_led netspace_v2_gpio_led_pins[] = {
+	{
+		.name	= "ns_v2:red:fail",
+		.gpio	= NETSPACE_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(netspace_v2_gpio_led_pins),
+	.leds		= netspace_v2_gpio_led_pins,
+};
+
+static struct platform_device netspace_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_gpio_leds_data,
+	},
+};
+
+static void __init netspace_v2_gpio_leds_init(void)
+{
+	platform_device_register(&netspace_v2_gpio_leds);
+
+	/*
+	 * Configure the front blue LED to blink in relation with the SATA
+	 * activity.
+	 */
+	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
+			 "SATA blue LED slow") != 0)
+		return;
+	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
+		goto err_free_1;
+	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
+			 "SATA blue LED command") != 0)
+		goto err_free_1;
+	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
+		goto err_free_2;
+
+	return;
+
+err_free_2:
+	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
+err_free_1:
+	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+	pr_err("netspace_v2: failed to configure SATA blue LED\n");
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void netspace_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer netspace_v2_timer = {
+	.init = netspace_v2_timer_init,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int netspace_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP14_GPIO,		/* USB fuse */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP25_GPIO,		/* Fan rotation fail */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP31_GPIO,		/* Board power off */
+	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
+	0
+};
+
+#define NETSPACE_V2_GPIO_POWER_OFF	31
+
+static void netspace_v2_power_off(void)
+{
+	gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netspace_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(netspace_v2_mpp_config);
+
+	netspace_v2_sata_power_init();
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&netspace_v2_ge00_data);
+	kirkwood_sata_init(&netspace_v2_sata_data);
+	kirkwood_uart0_init();
+	spi_register_board_info(netspace_v2_spi_slave_info,
+				ARRAY_SIZE(netspace_v2_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, netspace_v2_i2c_info,
+				ARRAY_SIZE(netspace_v2_i2c_info));
+
+	netspace_v2_gpio_leds_init();
+	platform_device_register(&netspace_v2_gpio_buttons);
+
+	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = netspace_v2_power_off;
+	else
+		pr_err("netspace_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netspace_v2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e6d8e10ae5d..8a0837ea029 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -110,6 +110,8 @@ config MACH_CM_X300
 	bool "CompuLab CM-X300 modules"
 	select PXA3xx
 	select CPU_PXA300
+	select CPU_PXA310
+	select HAVE_PWM
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -240,7 +242,6 @@ config MACH_COLIBRI300
 	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
-	select HAVE_PWM
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 3395463bb5a..8e10db148f1 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,7 +4,6 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/hardware.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
@@ -14,6 +13,7 @@
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
+#include <mach/hardware.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index b63a8f7b95c..a89444a3c01 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -127,15 +127,16 @@ ENTRY(fa_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(kaddr)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure that the data held in the page kaddr is written back
  *	to the page in question.
  *
- *	- kaddr   - kernel address (guaranteed to be page aligned)
+ *	- addr	- kernel address
+ *	- size	- size of region
  */
-ENTRY(fa_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(fa_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -213,7 +214,7 @@ ENTRY(fa_cache_fns)
 	.long	fa_flush_user_cache_range
 	.long	fa_coherent_kern_range
 	.long	fa_coherent_user_range
-	.long	fa_flush_kern_dcache_page
+	.long	fa_flush_kern_dcache_area
 	.long	fa_dma_inv_range
 	.long	fa_dma_clean_range
 	.long	fa_dma_flush_range
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 747f9a9021b..cb8fc6573b1 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -28,69 +28,120 @@
 static void __iomem *l2x0_base;
 static DEFINE_SPINLOCK(l2x0_lock);
 
-static inline void sync_writel(unsigned long val, unsigned long reg,
-			       unsigned long complete_mask)
+static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(val, l2x0_base + reg);
 	/* wait for the operation to complete */
-	while (readl(l2x0_base + reg) & complete_mask)
+	while (readl(reg) & mask)
 		;
-	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static inline void cache_sync(void)
 {
-	sync_writel(0, L2X0_CACHE_SYNC, 1);
+	void __iomem *base = l2x0_base;
+	writel(0, base + L2X0_CACHE_SYNC);
+	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
 static inline void l2x0_inv_all(void)
 {
+	unsigned long flags;
+
 	/* invalidate all ways */
-	sync_writel(0xff, L2X0_INV_WAY, 0xff);
+	spin_lock_irqsave(&l2x0_lock, flags);
+	writel(0xff, l2x0_base + L2X0_INV_WAY);
+	cache_wait(l2x0_base + L2X0_INV_WAY, 0xff);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static void l2x0_inv_range(unsigned long start, unsigned long end)
 {
-	unsigned long addr;
+	void __iomem *base = l2x0_base;
+	unsigned long flags;
 
+	spin_lock_irqsave(&l2x0_lock, flags);
 	if (start & (CACHE_LINE_SIZE - 1)) {
 		start &= ~(CACHE_LINE_SIZE - 1);
-		sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1);
+		cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+		writel(start, base + L2X0_CLEAN_INV_LINE_PA);
 		start += CACHE_LINE_SIZE;
 	}
 
 	if (end & (CACHE_LINE_SIZE - 1)) {
 		end &= ~(CACHE_LINE_SIZE - 1);
-		sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1);
+		cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+		writel(end, base + L2X0_CLEAN_INV_LINE_PA);
 	}
 
-	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-		sync_writel(addr, L2X0_INV_LINE_PA, 1);
+	while (start < end) {
+		unsigned long blk_end = start + min(end - start, 4096UL);
+
+		while (start < blk_end) {
+			cache_wait(base + L2X0_INV_LINE_PA, 1);
+			writel(start, base + L2X0_INV_LINE_PA);
+			start += CACHE_LINE_SIZE;
+		}
+
+		if (blk_end < end) {
+			spin_unlock_irqrestore(&l2x0_lock, flags);
+			spin_lock_irqsave(&l2x0_lock, flags);
+		}
+	}
+	cache_wait(base + L2X0_INV_LINE_PA, 1);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static void l2x0_clean_range(unsigned long start, unsigned long end)
 {
-	unsigned long addr;
+	void __iomem *base = l2x0_base;
+	unsigned long flags;
 
+	spin_lock_irqsave(&l2x0_lock, flags);
 	start &= ~(CACHE_LINE_SIZE - 1);
-	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-		sync_writel(addr, L2X0_CLEAN_LINE_PA, 1);
+	while (start < end) {
+		unsigned long blk_end = start + min(end - start, 4096UL);
+
+		while (start < blk_end) {
+			cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
+			writel(start, base + L2X0_CLEAN_LINE_PA);
+			start += CACHE_LINE_SIZE;
+		}
+
+		if (blk_end < end) {
+			spin_unlock_irqrestore(&l2x0_lock, flags);
+			spin_lock_irqsave(&l2x0_lock, flags);
+		}
+	}
+	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static void l2x0_flush_range(unsigned long start, unsigned long end)
 {
-	unsigned long addr;
+	void __iomem *base = l2x0_base;
+	unsigned long flags;
 
+	spin_lock_irqsave(&l2x0_lock, flags);
 	start &= ~(CACHE_LINE_SIZE - 1);
-	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-		sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1);
+	while (start < end) {
+		unsigned long blk_end = start + min(end - start, 4096UL);
+
+		while (start < blk_end) {
+			cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+			writel(start, base + L2X0_CLEAN_INV_LINE_PA);
+			start += CACHE_LINE_SIZE;
+		}
+
+		if (blk_end < end) {
+			spin_unlock_irqrestore(&l2x0_lock, flags);
+			spin_lock_irqsave(&l2x0_lock, flags);
+		}
+	}
+	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 8a4abebc478..2a482731ea3 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -72,14 +72,15 @@ ENTRY(v3_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *page, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v3_flush_kern_dcache_page)
+ENTRY(v3_flush_kern_dcache_area)
 	/* FALLTHROUGH */
 
 /*
@@ -129,7 +130,7 @@ ENTRY(v3_cache_fns)
 	.long	v3_flush_user_cache_range
 	.long	v3_coherent_kern_range
 	.long	v3_coherent_user_range
-	.long	v3_flush_kern_dcache_page
+	.long	v3_flush_kern_dcache_area
 	.long	v3_dma_inv_range
 	.long	v3_dma_clean_range
 	.long	v3_dma_flush_range
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 3668611cb40..5c7da3e372e 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -82,14 +82,15 @@ ENTRY(v4_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v4_flush_kern_dcache_page)
+ENTRY(v4_flush_kern_dcache_area)
 	/* FALLTHROUGH */
 
 /*
@@ -141,7 +142,7 @@ ENTRY(v4_cache_fns)
 	.long	v4_flush_user_cache_range
 	.long	v4_coherent_kern_range
 	.long	v4_coherent_user_range
-	.long	v4_flush_kern_dcache_page
+	.long	v4_flush_kern_dcache_area
 	.long	v4_dma_inv_range
 	.long	v4_dma_clean_range
 	.long	v4_dma_flush_range
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 2ebc1b3bf85..3dbedf1ec0e 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -114,15 +114,16 @@ ENTRY(v4wb_flush_user_cache_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v4wb_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(v4wb_flush_kern_dcache_area)
+	add	r1, r0, r1
 	/* fall through */
 
 /*
@@ -224,7 +225,7 @@ ENTRY(v4wb_cache_fns)
 	.long	v4wb_flush_user_cache_range
 	.long	v4wb_coherent_kern_range
 	.long	v4wb_coherent_user_range
-	.long	v4wb_flush_kern_dcache_page
+	.long	v4wb_flush_kern_dcache_area
 	.long	v4wb_dma_inv_range
 	.long	v4wb_dma_clean_range
 	.long	v4wb_dma_flush_range
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index c54fa2cc40e..b3b7410270b 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -117,17 +117,18 @@ ENTRY(v4wt_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v4wt_flush_kern_dcache_page)
+ENTRY(v4wt_flush_kern_dcach