Merge tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging tree changes from Greg Kroah-Hartman:
 "Here is the big staging tree pull request for the 3.5-rc1 merge
  window.

  Loads of changes here, and we just narrowly added more lines than we
  added:
   622 files changed, 28356 insertions(+), 26059 deletions(-)

  But, good news is that there is a number of subsystems that moved out
  of the staging tree, to their respective "real" portions of the
  kernel.

  Code that moved out was:
	- iio core code
	- mei driver
	- vme core and bridge drivers

  There was one broken network driver that moved into staging as a step
  before it is removed from the tree (pc300), and there was a few new
  drivers added to the tree:
	- new iio drivers
	- gdm72xx wimax USB driver
	- ipack subsystem and 2 drivers

  All of the movements around have acks from the various subsystem
  maintainers, and all of this has been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file.  Fix up manually
as per Stephen Rothwell.

* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
  Staging: bcm: Remove two unused variables from Adapter.h
  Staging: bcm: Removes the volatile type definition from Adapter.h
  Staging: bcm: Rename all "INT" to "int" in Adapter.h
  Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
  Staging: bcm: Correctly format all comments in Adapter.h
  Staging: bcm: Fix all whitespace issues in Adapter.h
  Staging: bcm: Properly format braces in Adapter.h
  Staging: ipack/bridges/tpci200: remove unneeded casts
  Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
  Staging: ipack: remove board_name and bus_name fields from struct ipack_device
  Staging: ipack: improve the register of a bus and a device in the bus.
  staging: comedi: cleanup all the comedi_driver 'detach' functions
  staging: comedi: remove all 'default N' in Kconfig
  staging: line6/config.h: Delete unused header
  staging: gdm72xx depends on NET
  staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
  staging: drm/omap: initial dmabuf/prime import support
  staging: drm/omap: dmabuf/prime mmap support
  pstore/ram: Add ECC support
  pstore/ram: Switch to persistent_ram routines
  ...

9 files changed, 315 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index c8042147eaa..7dbccaf199f 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -199,6 +199,43 @@
 				interrupts = <25 4>;
 				status = "disabled";
 			};
+
+			adc0: adc@fffb0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 4>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <8>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-channel-base = <0x30>;
+				atmel,adc-drdy-mask = <0x10000>;
+				atmel,adc-status-register = <0x1c>;
+				atmel,adc-trigger-register = <0x08>;
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index dd4ed748469..6b3ef4339ae 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -190,6 +190,44 @@
 				interrupts = <27 4>;
 				status = "disabled";
 			};
+
+			adc0: adc@f804c000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 4>;
+				atmel,adc-use-external;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <12>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-channel-base = <0x50>;
+				atmel,adc-drdy-mask = <0x1000000>;
+				atmel,adc-status-register = <0x30>;
+				atmel,adc-trigger-register = <0xc0>;
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index a27bbec50ca..2b1e438ed87 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -55,6 +55,13 @@ static struct clk adc_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 5000000,
+};
+
 static struct clk usart0_clk = {
 	.name		= "usart0_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
@@ -166,6 +173,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&pioB_clk,
 	&pioC_clk,
 	&adc_clk,
+	&adc_op_clk,
 	&usart0_clk,
 	&usart1_clk,
 	&usart2_clk,
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d556de14111..0ded951f785 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -17,12 +17,15 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91sam9260_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at91_adc.h>
 
 #include "generic.h"
 
@@ -1340,6 +1343,93 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 void __init at91_add_device_cf(struct at91_cf_data * data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  ADCs
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_ADC,
+		.end	= AT91SAM9260_BASE_ADC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_ADC,
+		.end	= AT91SAM9260_ID_ADC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_adc_device = {
+	.name		= "at91_adc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &adc_data,
+	},
+	.resource	= adc_resources,
+	.num_resources	= ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+	[0] = {
+		.name = "timer-counter-0",
+		.value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
+	},
+	[1] = {
+		.name = "timer-counter-1",
+		.value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
+	},
+	[2] = {
+		.name = "timer-counter-2",
+		.value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
+	},
+	[3] = {
+		.name = "external",
+		.value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
+		.is_external = true,
+	},
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g20 = {
+	.channel_base = AT91_ADC_CHR(0),
+	.drdy_mask = AT91_ADC_DRDY,
+	.status_register = AT91_ADC_SR,
+	.trigger_register = AT91_ADC_MR,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+	if (!data)
+		return;
+
+	if (test_bit(0, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC0, 0);
+	if (test_bit(1, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC1, 0);
+	if (test_bit(2, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC2, 0);
+	if (test_bit(3, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC3, 0);
+
+	if (data->use_external_triggers)
+		at91_set_A_periph(AT91_PIN_PA22, 0);
+
+	data->num_channels = 4;
+	data->startup_time = 10;
+	data->registers = &at91_adc_register_g20;
+	data->trigger_number = 4;
+	data->trigger_list = at91_adc_triggers;
+
+	adc_data = *data;
+	platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
 /* -------------------------------------------------------------------- */
 /*
  * These devices are always present and don't need any board-specific
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index f2054495a65..4792682d52b 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -176,6 +176,12 @@ static struct clk vdec_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 13200000,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -204,6 +210,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&isi_clk,
 	&udphs_clk,
 	&mmc1_clk,
+	&adc_op_clk,
 	// irq0
 };
 
@@ -242,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioC", &pioC_clk),
 	CLKDEV_CON_ID("pioD", &pioDE_clk),
 	CLKDEV_CON_ID("pioE", &pioDE_clk),
+	/* Fake adc clock */
+	CLKDEV_CON_ID("adc_clk", &tsc_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 35bd42d0219..f6747246d64 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -19,9 +19,12 @@
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
+#include <mach/at91_adc.h>
 #include <mach/board.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
@@ -1182,6 +1185,104 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  ADC
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TSC,
+		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TSC,
+		.end	= AT91SAM9G45_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91_adc_device = {
+	.name		= "at91_adc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &adc_data,
+	},
+	.resource	= adc_resources,
+	.num_resources	= ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+	[0] = {
+		.name = "external-rising",
+		.value = 1,
+		.is_external = true,
+	},
+	[1] = {
+		.name = "external-falling",
+		.value = 2,
+		.is_external = true,
+	},
+	[2] = {
+		.name = "external-any",
+		.value = 3,
+		.is_external = true,
+	},
+	[3] = {
+		.name = "continuous",
+		.value = 6,
+		.is_external = false,
+	},
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g45 = {
+	.channel_base = AT91_ADC_CHR(0),
+	.drdy_mask = AT91_ADC_DRDY,
+	.status_register = AT91_ADC_SR,
+	.trigger_register = 0x08,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+	if (!data)
+		return;
+
+	if (test_bit(0, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD20, 0);
+	if (test_bit(1, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD21, 0);
+	if (test_bit(2, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD22, 0);
+	if (test_bit(3, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD23, 0);
+	if (test_bit(4, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD24, 0);
+	if (test_bit(5, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD25, 0);
+	if (test_bit(6, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD26, 0);
+	if (test_bit(7, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD27, 0);
+
+	if (data->use_external_triggers)
+		at91_set_A_periph(AT91_PIN_PD28, 0);
+
+	data->num_channels = 8;
+	data->startup_time = 40;
+	data->registers = &at91_adc_register_g45;
+	data->trigger_number = 4;
+	data->trigger_list = at91_adc_triggers;
+
+	adc_data = *data;
+	platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 13c8cae6046..1b144b4d3ce 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -120,6 +120,11 @@ static struct clk adc_clk = {
 	.pmc_mask	= 1 << AT91SAM9X5_ID_ADC,
 	.type	= CLK_TYPE_PERIPHERAL,
 };
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 5000000,
+};
 static struct clk dma0_clk = {
 	.name		= "dma0_clk",
 	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA0,
@@ -205,6 +210,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&tcb0_clk,
 	&pwm_clk,
 	&adc_clk,
+	&adc_op_clk,
 	&dma0_clk,
 	&dma1_clk,
 	&uhphs_clk,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 3d615532ae5..6860d345110 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -32,6 +32,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/consumer.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -304,6 +306,16 @@ static void __init ek_add_device_buttons(void)
 static void __init ek_add_device_buttons(void) {}
 #endif
 
+/*
+ * ADCs
+ */
+
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3),
+	.use_external_triggers = true,
+	.vref = 3300,
+};
+
 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
 static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
 	REGULATOR_SUPPLY("AVDD", "0-001b"),
@@ -389,6 +401,8 @@ static void __init ek_board_init(void)
 	ek_add_device_gpio_leds();
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* ADCs */
+	at91_add_device_adc(&ek_adc_data);
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 9a87f0b072f..63163dc7df4 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -27,6 +27,8 @@
 #include <linux/atmel-mci.h>
 #include <linux/delay.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 #include <media/soc_camera.h>
@@ -305,6 +307,14 @@ static struct at91_tsadcc_data ek_tsadcc_data = {
 	.ts_sample_hold_time	= 0x0a,
 };
 
+/*
+ * ADCs
+ */
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
+	.use_external_triggers = true,
+	.vref = 3300,
+};
 
 /*
  * GPIO Buttons
@@ -476,6 +486,8 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen */
 	at91_add_device_tsadcc(&ek_tsadcc_data);
+	/* ADC */
+	at91_add_device_adc(&ek_adc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */