diff options
| author | Felix Blyakher <felixb@sgi.com> | 2009-03-30 22:08:33 -0500 |
|---|---|---|
| committer | Felix Blyakher <felixb@sgi.com> | 2009-03-30 22:08:33 -0500 |
| commit | 930861c4e6f13ce2e7d06cd1ef11441a065517d9 (patch) | |
| tree | df6ff01f89768ff8d6fe6a64491be30e6e56c3e0 /arch/arm | |
| parent | 8b112171734c791afaf43ccc8c6ec492e7006e44 (diff) | |
| parent | 15f7176eb1cccec0a332541285ee752b935c1c85 (diff) | |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Diffstat (limited to 'arch/arm')
665 files changed, 41475 insertions, 12379 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dbfdf87f993..e02b893fb90 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -241,6 +241,7 @@ config ARCH_VERSATILE config ARCH_AT91 bool "Atmel AT91" select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select HAVE_CLK help This enables support for systems based on the Atmel AT91RM9200, @@ -275,6 +276,14 @@ config ARCH_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. +config ARCH_GEMINI + bool "Cortina Systems Gemini" + select CPU_FA526 + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for the Cortina Systems Gemini family SoCs + config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 @@ -477,12 +486,29 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT + select PLAT_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. +config ARCH_MMP + bool "Marvell PXA168/910" + depends on MMU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select PLAT_PXA + help + Support for Marvell's PXA168/910 processor line. + config ARCH_RPC bool "RiscPC" select ARCH_ACORN @@ -598,6 +624,8 @@ source "arch/arm/mach-ep93xx/Kconfig" source "arch/arm/mach-footbridge/Kconfig" +source "arch/arm/mach-gemini/Kconfig" + source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-iop32x/Kconfig" @@ -617,6 +645,9 @@ source "arch/arm/mach-loki/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-pxa/Kconfig" +source "arch/arm/plat-pxa/Kconfig" + +source "arch/arm/mach-mmp/Kconfig" source "arch/arm/mach-sa1100/Kconfig" @@ -686,12 +717,15 @@ config PLAT_IOP config PLAT_ORION bool +config PLAT_PXA + bool + source arch/arm/mm/Kconfig config IWMMXT bool "Enable iWMMXt support" - depends on CPU_XSCALE || CPU_XSC3 - default y if PXA27x || PXA3xx + depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK + default y if PXA27x || PXA3xx || ARCH_MMP help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. @@ -915,6 +949,23 @@ config NODES_SHIFT default "2" depends on NEED_MULTIPLE_NODES +config HIGHMEM + bool "High Memory Support (EXPERIMENTAL)" + depends on MMU && EXPERIMENTAL + help + The address space of ARM processors is only 4 Gigabytes large + and it has to accommodate user address space, kernel address + space as well as some memory mapped IO. That means that, if you + have a large amount of physical memory and/or IO, not all of the + memory can be "permanently mapped" by the kernel. The physical + memory that is not permanently mapped is called "high memory". + + Depending on the selected kernel/user memory split, minimum + vmalloc space and actual amount of RAM, you may not need this + option which should result in a slightly faster kernel. + + If unsure, say n. + source "mm/Kconfig" config LEDS @@ -1092,7 +1143,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) default y config CPU_FREQ_SA1110 diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 192ee01a9ba..a71fd941ade 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -2,18 +2,29 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -# RMK wants arm kernels compiled with frame pointers so hardwire this to y. +# RMK wants arm kernels compiled with frame pointers or stack unwinding. # If you know what you are doing and are willing to live without stack # traces, you can get a slightly smaller kernel by setting this option to # n, but then RMK will have to kill you ;). config FRAME_POINTER bool - default y + default y if !ARM_UNWIND help If you say N here, the resulting kernel will be slightly smaller and - faster. However, when a problem occurs with the kernel, the - information that is reported is severely limited. Most people - should say Y here. + faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, + when a problem occurs with the kernel, the information that is + reported is severely limited. + +config ARM_UNWIND + bool "Enable stack unwinding support" + depends on AEABI && EXPERIMENTAL + default y + help + This option enables stack unwinding support in the kernel + using the information automatically generated by the + compiler. The resulting kernel image is slightly bigger but + the performance is not affected. Currently, this feature + only works with EABI compilers. If unsure say Y. config DEBUG_USER bool "Verbose user fault messages" @@ -66,7 +77,7 @@ config DEBUG_ICEDCC Say Y here if you want the debug print routines to direct their output to the EmbeddedICE macrocell's DCC channel using co-processor 14. This is known to work on the ARM9 style ICE - channel. + channel and on the XScale with the PEEDI. It does include a timeout to ensure that the system does not totally freeze when there is nothing connected to read. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 24e0f018769..e84729bf13d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -72,6 +72,7 @@ tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi +tune-$(CONFIG_CPU_FA526) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale @@ -85,6 +86,10 @@ else CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) endif +ifeq ($(CONFIG_ARM_UNWIND),y) +CFLAGS_ABI +=-funwind-tables +endif + # Need -Uarm for gcc < 3.x KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float @@ -105,8 +110,11 @@ ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif machine-$(CONFIG_ARCH_PXA) := pxa + machine-$(CONFIG_ARCH_MMP) := mmp + plat-$(CONFIG_PLAT_PXA) := pxa machine-$(CONFIG_ARCH_L7200) := l7200 machine-$(CONFIG_ARCH_INTEGRATOR) := integrator + machine-$(CONFIG_ARCH_GEMINI) := gemini textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_IOP32X) := iop32x diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 77d614232d8..b371fba1b95 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -27,6 +27,12 @@ .macro writeb, ch, rb mcr p14, 0, \ch, c0, c5, 0 .endm +#elif defined(CONFIG_CPU_XSCALE) + .macro loadsp, rb + .endm + .macro writeb, ch, rb + mcr p14, 0, \ch, c8, c0, 0 + .endm #else .macro loadsp, rb .endm @@ -459,6 +465,20 @@ __armv7_mmu_cache_on: mcr p15, 0, r0, c7, c5, 4 @ ISB mov pc, r12 +__fa526_cache_on: + mov r12, lr + bl __setup_mmu + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 @ Invalidate whole cache + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c8, c7, 0 @ flush UTLB + mrc p15, 0, r0, c1, c0, 0 @ read control reg + orr r0, r0, #0x1000 @ I-cache enable + bl __common_mmu_cache_on + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ flush UTLB + mov pc, r12 + __arm6_mmu_cache_on: mov r12, lr bl __setup_mmu @@ -630,12 +650,30 @@ proc_types: b __armv4_mmu_cache_off b __armv4_mmu_cache_flush + .word 0x56158000 @ PXA168 + .word 0xfffff000 + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv5tej_mmu_cache_flush + + .word 0x56056930 + .word 0xff0ffff0 @ PXA935 + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush + .word 0x56050000 @ Feroceon .word 0xff0f0000 b __armv4_mmu_cache_on b __armv4_mmu_cache_off b __armv5tej_mmu_cache_flush + .word 0x66015261 @ FA526 + .word 0xff01fff1 + b __fa526_cache_on + b __armv4_mmu_cache_off + b __fa526_cache_flush + @ These match on the architecture ID .word 0x00020000 @ ARMv4T @@ -775,6 +813,12 @@ __armv4_mpu_cache_flush: mcr p15, 0, ip, c7, c10, 4 @ drain WB mov pc, lr +__fa526_cache_flush: + mov r1, #0 + mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache + mcr p15, 0, r1, c7, c5, 0 @ flush I cache + mcr p15, 0, r1, c7, c10, 4 @ drain WB + mov pc, lr __armv6_mmu_cache_flush: mov r1, #0 diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 3fc08413fff..393c8164131 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -46,6 +46,21 @@ static void icedcc_putc(int ch) asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch)); } +#elif defined(CONFIG_CPU_XSCALE) + +static void icedcc_putc(int ch) +{ + int status, i = 0x4000000; + + do { + if (--i < 0) + return; + + asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status)); + } while (status & (1 << 28)); + + asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch)); +} #else diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 153a07e7222..a5924b9b88b 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -11,6 +11,11 @@ OUTPUT_ARCH(arm) ENTRY(_start) SECTIONS { + /DISCARD/ : { + *(.ARM.exidx*) + *(.ARM.extab*) + } + . = TEXT_START; _text = .; diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 1037bba1832..5589444ff43 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -62,9 +62,8 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) return clk; } -struct clk *clk_get(struct device *dev, const char *con_id) +struct clk *clk_get_sys(const char *dev_id, const char *con_id) { - const char *dev_id = dev ? dev_name(dev) : NULL; struct clk *clk; mutex_lock(&clocks_mutex); @@ -75,6 +74,14 @@ struct clk *clk_get(struct device *dev, const char *con_id) return clk ? clk : ERR_PTR(-ENOENT); } +EXPORT_SYMBOL(clk_get_sys); + +struct clk *clk_get(struct device *dev, const char *con_id) +{ + const char *dev_id = dev ? dev_name(dev) : NULL; + + return clk_get_sys(dev_id, con_id); +} EXPORT_SYMBOL(clk_get); void clk_put(struct clk *clk) diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index f030f0775be..734ac913599 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/page-flags.h> #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/dmapool.h> @@ -349,6 +350,12 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, BUG_ON(!valid_dma_direction(dir)); + if (PageHighMem(page)) { + dev_err(dev, "DMA buffer bouncing of HIGHMEM pages " + "is not supported\n"); + return ~0; + } + return map_single(dev, page_address(page) + offset, size, dir); } EXPORT_SYMBOL(dma_map_page); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 697c6491399..7713a08bb10 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -124,37 +124,6 @@ static int scoop_gpio_direction_output(struct gpio_chip *chip, return 0; } -unsigned short set_scoop_gpio(struct device *dev, unsigned short bit) -{ - unsigned short gpio_bit; - unsigned long flag; - struct scoop_dev *sdev = dev_get_drvdata(dev); - - spin_lock_irqsave(&sdev->scoop_lock, flag); - gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit; - iowrite16(gpio_bit, sdev->base + SCOOP_GPWR); - spin_unlock_irqrestore(&sdev->scoop_lock, flag); - - return gpio_bit; -} - -unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit) -{ - unsigned short gpio_bit; - unsigned long flag; - struct scoop_dev *sdev = dev_get_drvdata(dev); - - spin_lock_irqsave(&sdev->scoop_lock, flag); - gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit; - iowrite16(gpio_bit, sdev->base + SCOOP_GPWR); - spin_unlock_irqrestore(&sdev->scoop_lock, flag); - - return gpio_bit; -} - -EXPORT_SYMBOL(set_scoop_gpio); -EXPORT_SYMBOL(reset_scoop_gpio); - unsigned short read_scoop_reg(struct device *dev, unsigned short reg) { struct scoop_dev *sdev = dev_get_drvdata(dev); diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 780bbf7cb26..140f1d721d5 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -29,8 +29,8 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <mach/pm.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> +#include <mach/regs-rtc.h> #include <mach/sharpsl.h> #include <asm/hardware/sharpsl_pm.h> diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig new file mode 100644 index 00000000000..1cab4e79d36 --- /dev/null +++ b/arch/arm/configs/acs5k_defconfig @@ -0,0 +1,1233 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-simtec-micrel1 +# Tue Dec 16 13:31:34 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +CONFIG_ARCH_KS8695=y +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Kendin/Micrel KS8695 Implementations +# +CONFIG_MACH_KS8695=y +CONFIG_MACH_DSM320=y +CONFIG_MACH_ACS5K=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM922T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +CONFIG_PCI_DEBUG=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_KS8695_ETHER=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_PRISM54=m +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_KS8695=y +CONFIG_SERIAL_KS8695_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_ACS5KCAN=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_KS8695_WATCHDOG=y +# CONFIG_ALIM7101_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig new file mode 100644 index 00000000000..8e3d084afd7 --- /dev/null +++ b/arch/arm/configs/acs5k_tiny_defconfig @@ -0,0 +1,941 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-simtec-micrel1 +# Tue Jan 6 13:23:07 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +CONFIG_ARCH_KS8695=y +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Kendin/Micrel KS8695 Implementations +# +# CONFIG_MACH_KS8695 is not set +# CONFIG_MACH_DSM320 is not set +CONFIG_MACH_ACS5K=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM922T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_KS8695_ETHER=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_KS8695=y +CONFIG_SERIAL_KS8695_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_ACS5KCAN=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_KS8695_WATCHDOG=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index b1cd331aaec..c66dd399e42 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -89,7 +89,6 @@ CONFIG_SA1100_ASSABET=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 80222feb7da..f264846218a 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set CONFIG_SA1100_BADGE4=y # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index ee130b528bd..2b4c0668b1b 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -93,7 +93,6 @@ CONFIG_SA1100_CERF_FLASH_16MB=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index 1039f366bf8..797b790cba7 100644 --- a/arch/arm/configs/xm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc8 -# Sun Oct 5 11:05:36 2008 +# Linux kernel version: 2.6.29-rc2 +# Sun Feb 1 16:31:36 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,7 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y @@ -47,12 +46,12 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -80,27 +79,21 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -108,11 +101,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -129,6 +120,11 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_FREEZER=y # # System Type @@ -138,7 +134,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -165,17 +160,19 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set -CONFIG_DMABOUNCE=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Intel PXA2xx/PXA3xx Implementations # # CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set @@ -185,7 +182,9 @@ CONFIG_DMABOUNCE=y # CONFIG_ARCH_VIPER is not set # CONFIG_ARCH_PXA_ESERIES is not set # CONFIG_TRIZEPS_PXA is not set -CONFIG_MACH_EM_X270=y +# CONFIG_MACH_H5000 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set # CONFIG_MACH_COLIBRI is not set # CONFIG_MACH_ZYLONITE is not set # CONFIG_MACH_LITTLETON is not set @@ -204,14 +203,6 @@ CONFIG_PXA_SSP=y # CONFIG_PXA_PWM is not set # -# Boot options -# - -# -# Power management -# - -# # Processor Type # CONFIG_CPU_32=y @@ -232,6 +223,8 @@ CONFIG_ARM_THUMB=y # CONFIG_OUTER_CACHE is not set CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -242,6 +235,7 @@ CONFIG_PCI_HOST_ITE8152=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m @@ -287,14 +281,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -327,6 +320,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -345,6 +340,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -389,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -399,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -420,8 +418,6 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set @@ -434,15 +430,15 @@ CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -467,6 +463,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -521,9 +518,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x400000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set CONFIG_MTD_PXA2XX=y # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set @@ -535,6 +530,8 @@ CONFIG_MTD_PXA2XX=y # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -563,6 +560,12 @@ CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -642,6 +645,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -756,26 +761,30 @@ CONFIG_MII=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=1 # CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=y +CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set @@ -783,10 +792,12 @@ CONFIG_8139TOO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -797,8 +808,6 @@ CONFIG_8139TOO=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set CONFIG_LIBERTAS=m # CONFIG_LIBERTAS_USB is not set # CONFIG_LIBERTAS_CS is not set @@ -811,10 +820,16 @@ CONFIG_LIBERTAS_SDIO=m # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -879,22 +894,22 @@ CONFIG_KEYBOARD_PXA27x=m # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -CONFIG_TOUCHSCREEN_WM97XX=m -# CONFIG_TOUCHSCREEN_WM9705 is not set -CONFIG_TOUCHSCREEN_WM9712=y -# CONFIG_TOUCHSCREEN_WM9713 is not set -# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +CONFIG_TOUCHSCREEN_UCB1400=m +# CONFIG_TOUCHSCREEN_WM97XX is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -933,6 +948,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set @@ -1009,26 +1025,45 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -1043,17 +1078,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1064,11 +1101,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set -# CONFIG_UCB1400_CORE is not set +CONFIG_UCB1400_CORE=m +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1077,13 +1120,117 @@ CONFIG_SSB_POSSIBLE=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_CUSTOMIZE=y +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +# CONFIG_SOC_CAMERA_MT9M001 is not set +CONFIG_SOC_CAMERA_MT9M111=m +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_PXA27x=m +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -1095,6 +1242,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1128,6 +1276,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1138,13 +1287,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set # CONFIG_FB_PXA_SMARTPANEL is not set CONFIG_FB_PXA_PARAMETERS=y CONFIG_FB_MBX=m # CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set # # Display device support @@ -1167,6 +1320,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1182,81 +1336,16 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set CONFIG_SND_ARM=y CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_LIB=m +CONFIG_SND_PXA2XX_LIB_AC97=y CONFIG_SND_PXA2XX_AC97=m -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set -CONFIG_SND_PCMCIA=y -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m @@ -1269,9 +1358,37 @@ CONFIG_HID_DEBUG=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1291,12 +1408,15 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1306,6 +1426,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -1314,20 +1436,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1355,6 +1477,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1371,13 +1494,20 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_UWB is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y @@ -1385,11 +1515,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_PXA=m # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_SPI is not set # CONFIG_MMC_SDRICOH_CS is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set @@ -1400,8 +1531,7 @@ CONFIG_LEDS_CLASS=y # LED drivers # # CONFIG_LEDS_PCA9532 is not set -# CONFIG_LEDS_GPIO is not set -CONFIG_LEDS_CM_X270=y +CONFIG_LEDS_GPIO=m # CONFIG_LEDS_PCA955X is not set # @@ -1410,6 +1540,7 @@ CONFIG_LEDS_CM_X270=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1441,37 +1572,43 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set # CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1483,14 +1620,16 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1520,15 +1659,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1548,6 +1685,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1567,6 +1705,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1678,19 +1817,29 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1705,13 +1854,16 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1783,14 +1935,18 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 744086fff41..4cf3bde1c52 100644 --- a/arch/arm/configs/colibri_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Mon Dec 3 13:36:09 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 16:18:17 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,8 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -42,22 +43,30 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y @@ -70,29 +79,38 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_LSF=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,6 +124,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y # # System Type @@ -115,9 +134,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -131,41 +148,58 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set # CONFIG_MACH_EM_X270 is not set CONFIG_MACH_COLIBRI=y +# CONFIG_MACH_COLIBRI300 is not set # CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_RAUMFELD_PROTO is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set # CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA27x=y - -# -# Boot options -# - -# -# Power management -# +# CONFIG_PXA_PWM is not set # # Processor Type @@ -174,6 +208,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -187,6 +222,7 @@ CONFIG_ARM_THUMB=y # CONFIG_OUTER_CACHE is not set CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -198,28 +234,33 @@ CONFIG_XSCALE_PMU=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -232,6 +273,12 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -246,6 +293,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -253,21 +302,18 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -275,6 +321,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -304,26 +351,26 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -332,7 +379,9 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set @@ -342,12 +391,14 @@ CONFIG_VLAN_8021Q=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -382,15 +433,6 @@ CONFIG_IRTTY_SIR=m # CONFIG_KS959_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_USB_IRDA is not set @@ -410,7 +452,6 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -# CONFIG_BT_HCIUSB is not set # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set @@ -419,21 +460,20 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +CONFIG_LIB80211_CRYPT_WEP=y +CONFIG_LIB80211_CRYPT_CCMP=y +CONFIG_LIB80211_CRYPT_TKIP=y # CONFIG_MAC80211 is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -448,6 +488,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -457,9 +499,11 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -510,9 +554,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set CONFIG_MTD_PXA2XX=y # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set @@ -538,6 +580,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_DISKONCHIP=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y @@ -556,6 +599,11 @@ CONFIG_MTD_ONENAND=y # CONFIG_MTD_ONENAND_SIM is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -569,36 +617,41 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=8 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -610,7 +663,6 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -631,6 +683,10 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -638,11 +694,17 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -654,10 +716,15 @@ CONFIG_DM9000=y CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_IWLWIFI_LEDS is not set CONFIG_HOSTAP=y CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y -# CONFIG_ZD1211RW is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -670,7 +737,6 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -710,6 +776,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_INPUT_JOYSTICK is not set @@ -718,20 +785,25 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -CONFIG_TOUCHSCREEN_UCB1400=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # # Hardware I/O ports @@ -746,9 +818,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -764,45 +838,50 @@ CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set -# CONFIG_I2C_PXA is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PXA is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -811,16 +890,35 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -828,7 +926,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -848,6 +949,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -856,6 +958,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -863,9 +966,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -879,23 +985,46 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -907,6 +1036,7 @@ CONFIG_DAB=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -914,8 +1044,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -928,13 +1058,20 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -964,12 +1101,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set -CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -979,18 +1111,26 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +# CONFIG_HID_APPLE is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -999,29 +1139,40 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -1029,19 +1180,14 @@ CONFIG_USB_DEVICEFS=y # USB Imaging devices # # CONFIG_USB_MDC800 is not set -# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set @@ -1059,6 +1205,7 @@ CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -1066,17 +1213,21 @@ CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1085,7 +1236,7 @@ CONFIG_USB_SERIAL=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1101,30 +1252,29 @@ CONFIG_USB_SERIAL=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set CONFIG_USB_GADGET_DUMMY_HCD=y CONFIG_USB_DUMMY_HCD=m CONFIG_USB_GADGET_DUALSPEED=y @@ -1134,21 +1284,32 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_PXA is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y # CONFIG_LEDS_CLASS is not set @@ -1163,6 +1324,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_IDE_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -1190,6 +1353,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set CONFIG_RTC_DRV_PCF8583=m # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1199,36 +1365,45 @@ CONFIG_RTC_DRV_PCF8583=m # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_SA1100 is not set +# CONFIG_RTC_DRV_PXA is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1254,15 +1429,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=y - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1283,9 +1456,13 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1293,20 +1470,18 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1361,9 +1536,6 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1371,6 +1543,7 @@ CONFIG_INSTRUMENTATION=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1378,9 +1551,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1396,16 +1572,40 @@ CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1415,58 +1615,114 @@ CONFIG_DEBUG_LL=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig new file mode 100644 index 00000000000..4774a36fa74 --- /dev/null +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -0,0 +1,1156 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 16:13:20 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Supported PXA3xx Processor Variants +# +CONFIG_CPU_PXA300=y +# CONFIG_CPU_PXA310 is not set +# CONFIG_CPU_PXA320 is not set +# CONFIG_CPU_PXA930 is not set +# CONFIG_CPU_PXA935 is not set +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +CONFIG_MACH_COLIBRI300=y +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_RAUMFELD_PROTO is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set +CONFIG_PXA3xx=y +# CONFIG_PXA_PWM is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_IO_36=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_XSC3L2=y +CONFIG_IWMMXT=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="console=ttyS0,115200 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_AX88796=y +# CONFIG_AX88796_93CX6 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index f7622e65816..1aa62249031 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -113,7 +113,6 @@ CONFIG_ARCH_SA1100=y CONFIG_SA1100_COLLIE=y # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig new file mode 100644 index 00000000000..e9955b786c8 --- /dev/null +++ b/arch/arm/configs/em_x270_defconfig @@ -0,0 +1,1741 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc2 +# Sun Feb 1 16:43:31 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set +CONFIG_MACH_EM_X270=y +CONFIG_MACH_EXEDA=y +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +# CONFIG_PXA_PWM is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=1f03 mem=32M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=m +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +# CONFIG_BT_RFCOMM_TTY is not set +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=1 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_APMPOWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_DA9034 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_WM97XX=m +# CONFIG_TOUCHSCREEN_WM9705 is not set +CONFIG_TOUCHSCREEN_WM9712=y +# CONFIG_TOUCHSCREEN_WM9713 is not set +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_PXA2XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_BATTERY_DA9030=y +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +CONFIG_PMIC_DA903X=y +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_CUSTOMIZE=y +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=m +# CONFIG_SOC_CAMERA_MT9M001 is not set +CONFIG_SOC_CAMERA_MT9M111=m +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_PXA27x=m +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_FB_MBX=m +# CONFIG_FB_MBX_DEBUG is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_TDO24M=y +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_DA903X=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_LIB=m +CONFIG_SND_PXA2XX_LIB_AC97=y +# CONFIG_SND_PXA2XX_AC97 is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_AC97=m +CONFIG_SND_PXA2XX_SOC_EM_X270=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM9712=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=m +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set +CONFIG_LEDS_DA903X=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +CONFIG_RTC_DRV_V3020=y + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set +# CONFIG_DMADEVICES is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_DA903X=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=0 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index 8f986e9f1c6..1502957db2c 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set CONFIG_SA1100_H3600=y -# CONFIG_SA1100_H3800 is not set CONFIG_SA1100_H3XXX=y # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set @@ -100,7 +99,6 @@ CONFIG_SA1100_H3XXX=y # CONFIG_SA1100_SHANNON is not set # CONFIG_SA1100_SIMPAD is not set # CONFIG_SA1100_SSP is not set -# CONFIG_H3600_SLEEVE is not set # # Processor Type diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index 1c8fb89a673..db0708d5cbe 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set CONFIG_SA1100_HACKKIT=y diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index 81fadafae02..f3074e49f2f 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -178,7 +178,6 @@ CONFIG_DMABOUNCE=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set CONFIG_SA1100_JORNADA720=y CONFIG_SA1100_JORNADA720_SSP=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 4bc38078d58..c367ae44012 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Thu Dec 4 15:27:39 2008 +# Linux kernel version: 2.6.29-rc5 +# Tue Mar 3 21:45:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -42,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set +CONFIG_LOG_BUF_SHIFT=19 # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set CONFIG_NAMESPACES=y @@ -53,6 +62,7 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -83,6 +93,7 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -93,7 +104,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -101,11 +111,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -121,7 +129,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -132,7 +139,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -159,11 +165,13 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell Kirkwood Implementations @@ -171,14 +179,8 @@ CONFIG_ARCH_KIRKWOOD=y CONFIG_MACH_DB88F6281_BP=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y - -# -# Boot options -# - -# -# Power management -# +CONFIG_MACH_SHEEVAPLUG=y +CONFIG_MACH_TS219=y CONFIG_PLAT_ORION=y # @@ -214,6 +216,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # @@ -242,7 +245,6 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y @@ -291,6 +293,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -355,6 +358,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -368,12 +372,27 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set +CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +CONFIG_LIB80211=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +417,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -451,9 +471,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -481,6 +499,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -491,6 +510,12 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -568,6 +593,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -682,6 +709,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -695,6 +725,7 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -710,7 +741,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -720,6 +750,7 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -754,8 +785,39 @@ CONFIG_MV643XX_ETH=y # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH9K is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWLAGN is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -791,13 +853,20 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -807,7 +876,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # @@ -839,11 +912,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -879,6 +952,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MV64XXX=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -905,8 +979,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -925,12 +997,12 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set CONFIG_SPI_ORION=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set @@ -952,10 +1024,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1012,11 +1086,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1024,12 +1096,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1058,6 +1133,7 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set @@ -1087,7 +1163,6 @@ CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1135,21 +1210,51 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_UWB is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_MVSDIO=y +# CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y -# CONFIG_LEDS_CLASS is not set +CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set # # LED Triggers # -# CONFIG_LEDS_TRIGGERS is not set +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1178,7 +1283,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set +CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1227,6 +1332,7 @@ CONFIG_DMA_ENGINE=y # CONFIG_DMATEST is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1238,16 +1344,14 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y -CONFIG_XFS_FS=y -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1268,9 +1372,9 @@ CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set @@ -1286,10 +1390,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1309,6 +1410,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1393,7 +1495,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -1416,6 +1518,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y @@ -1424,7 +1527,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1435,7 +1538,10 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y # # Tracers @@ -1446,11 +1552,14 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1464,19 +1573,22 @@ CONFIG_DEBUG_LL=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1496,7 +1608,7 @@ CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_XTS is not set @@ -1510,7 +1622,7 @@ CONFIG_CRYPTO_PCBC=m # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1527,9 +1639,9 @@ CONFIG_CRYPTO_PCBC=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set @@ -1560,6 +1672,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index a1cc34f2560..56ae56899d2 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 73ba62b7106..82428c2f234 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Sun Dec 30 13:02:54 2007 +# Linux kernel version: 2.6.29-rc3 +# Fri Jan 30 12:42:03 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y @@ -12,6 +13,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,8 +23,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,16 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -65,31 +75,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -103,8 +123,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set +CONFIG_FREEZER=y # # System Type @@ -114,9 +133,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -130,41 +147,58 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_H5000 is not set # CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set # CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set # CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set CONFIG_MACH_MAGICIAN=y +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA27x=y - -# -# Boot options -# - -# -# Power management -# +CONFIG_PXA_SSP=y +CONFIG_PXA_PWM=y +CONFIG_PXA_HAVE_BOARD_IRQS=y # # Processor Type @@ -173,6 +207,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -186,6 +221,7 @@ CONFIG_ARM_THUMB=y # CONFIG_OUTER_CACHE is not set CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -197,28 +233,33 @@ CONFIG_XSCALE_PMU=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -229,9 +270,10 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="keepinitrd" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y # -# CPU Frequency scaling +# CPU Power Management # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y @@ -239,6 +281,7 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set @@ -247,6 +290,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -263,6 +307,8 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -270,21 +316,18 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -316,33 +359,15 @@ CONFIG_IP_PNP=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -353,6 +378,7 @@ CONFIG_NETFILTER=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -390,20 +416,17 @@ CONFIG_IRTTY_SIR=m # Dongle support # # CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set # # FIR device drivers # +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -417,17 +440,17 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,25 +465,28 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=0 +# CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -473,6 +499,7 @@ CONFIG_MTD_BLOCK=m # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y @@ -487,6 +514,7 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -497,9 +525,7 @@ CONFIG_MTD_CFI_INTELEXT=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x04000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PXA2XX is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_SHARP_SL is not set @@ -523,6 +549,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -531,10 +563,12 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -547,7 +581,6 @@ CONFIG_BLK_DEV=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -563,6 +596,20 @@ CONFIG_NETDEVICES=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -612,7 +659,26 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -625,9 +691,11 @@ CONFIG_INPUT_UINPUT=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -642,6 +710,7 @@ CONFIG_SERIAL_PXA=y # CONFIG_SERIAL_PXA_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -649,37 +718,45 @@ CONFIG_UNIX98_PTYS=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -CONFIG_I2C=m +CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=m -# CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -688,19 +765,39 @@ CONFIG_I2C_PXA=m # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# SPI support +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set CONFIG_W1=y # # 1-wire Bus Masters # +# CONFIG_W1_MASTER_DS2490 is not set # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_DS1WM=y +# CONFIG_W1_MASTER_GPIO is not set # # 1-wire Slaves @@ -709,32 +806,56 @@ CONFIG_W1_MASTER_DS1WM=y # CONFIG_W1_SLAVE_SMEM is not set # CONFIG_W1_SLAVE_DS2433 is not set CONFIG_W1_SLAVE_DS2760=y +# CONFIG_W1_SLAVE_BQ27000 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set CONFIG_PDA_POWER=y -# CONFIG_APM_POWER is not set CONFIG_BATTERY_DS2760=y +# CONFIG_BATTERY_BQ27x00 is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -745,6 +866,7 @@ CONFIG_HTC_PASIC3=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -752,8 +874,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -765,13 +887,21 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y # # Display device support @@ -802,15 +932,8 @@ CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -824,53 +947,185 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_PXA2XX_AC97 is not set - -# -# System on Chip audio support -# +# CONFIG_SND_ARM is not set +CONFIG_SND_PXA2XX_LIB=m +# CONFIG_SND_USB is not set CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set # CONFIG_HID_SUPPORT is not set CONFIG_HID=m -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +# CONFIG_USB_ETH_RNDIS is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_PXA=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -899,6 +1154,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -908,17 +1166,26 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_SA1100=y +# CONFIG_RTC_DRV_PXA is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -927,19 +1194,18 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -965,15 +1231,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -997,9 +1261,13 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1007,14 +1275,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1076,6 +1343,7 @@ CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1083,15 +1351,18 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set @@ -1100,17 +1371,41 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1119,55 +1414,110 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_CBC is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 83c817f31bc..b0698722e0c 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -165,6 +165,7 @@ CONFIG_ARCH_MV78XX0=y # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y +CONFIG_MACH_RD78X00_MASA=y # # Boot options diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index d81ea219c93..36cd62edd05 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -91,7 +91,6 @@ CONFIG_ASSABET_NEPONSET=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig new file mode 100644 index 00000000000..8fb918d9ba6 --- /dev/null +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -0,0 +1,2061 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 14:17:01 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP3_BEAGLE=y +CONFIG_MACH_OMAP_LDP=y +CONFIG_MACH_OVERO=y +CONFIG_MACH_OMAP3_PANDORA=y +CONFIG_MACH_OMAP_3430SDP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +CONFIG_EEPROM_93CX6=m +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=m +CONFIG_SMSC911X=m +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +CONFIG_LIBERTAS_USB=y +CONFIG_LIBERTAS_SDIO=y +CONFIG_LIBERTAS_DEBUG=y +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_USB_ZD1201=m +# CONFIG_USB_NET_RNDIS_WLAN is not set +CONFIG_RTL8187=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_GSPCA is not set +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +# CONFIG_USB_ET61X251 is not set +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_ZR364XX=m +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +# CONFIG_DVB_TDA8261 is not set +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +# CONFIG_DVB_TUNER_CX24113 is not set +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +# CONFIG_DVB_LGDT3304 is not set +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +# CONFIG_SND_OMAP_SOC_OVERO is not set +CONFIG_SND_OMAP_SOC_SDP3430=y +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_TWL4030=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y +CONFIG_USB_WDM=y +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index a8ee6984a09..020e6a8a9e5 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -481,7 +481,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ALAUDA is not set CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set @@ -1177,7 +1177,7 @@ CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T86=y # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index a6b47ea8e46..f2d2dda2594 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -88,7 +88,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig new file mode 100644 index 00000000000..db5faeaec96 --- /dev/null +++ b/arch/arm/configs/pxa168_defconfig @@ -0,0 +1,891 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc3 +# Fri Mar 20 13:43:13 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +CONFIG_ARCH_MMP=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_MACH_TAVOREVB is not set + +# +# Marvell PXA168/910 Implmentations +# +CONFIG_MACH_ASPENITE=y +CONFIG_MACH_ZYLONITE2=y +# CONFIG_MACH_TTC_DKB is not set +CONFIG_CPU_PXA168=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_MOHAWK=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig new file mode 100644 index 00000000000..8c7e299f1d6 --- /dev/null +++ b/arch/arm/configs/pxa910_defconfig @@ -0,0 +1,891 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc3 +# Fri Mar 20 13:45:12 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +CONFIG_ARCH_MMP=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_MACH_TAVOREVB=y + +# +# Marvell PXA168/910 Implmentations +# +# CONFIG_MACH_ASPENITE is not set +# CONFIG_MACH_ZYLONITE2 is not set +CONFIG_MACH_TTC_DKB=y +CONFIG_CPU_PXA910=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_MOHAWK=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig new file mode 100644 index 00000000000..593102da8cd --- /dev/null +++ b/arch/arm/configs/rx51_defconfig @@ -0,0 +1,1821 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 15:28:56 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +CONFIG_MACH_NOKIA_RX51=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +CONFIG_MTD_OOPS=y + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +CONFIG_SMC91X=m +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +# CONFIG_USB_GSPCA is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +CONFIG_USB_OTG_WHITELIST=y +CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=m +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=m +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +CONFIG_LOCK_STAT=y +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index d052c8f8051..984f7096a53 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index 9b6561d119a..90235bf7a1d 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -1,88 +1,174 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-git3 -# Sat Jul 16 15:21:47 2005 +# Linux kernel version: 2.6.28-git6 +# Thu Jan 8 17:14:47 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_FREEZER is not set # # System Type # -# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set CONFIG_ARCH_SHARK=y # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Processor Type @@ -91,14 +177,20 @@ CONFIG_CPU_32=y CONFIG_CPU_SA110=y CONFIG_CPU_32v4=y CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set # # Bus support @@ -107,22 +199,40 @@ CONFIG_ISA=y CONFIG_ISA_DMA=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y CONFIG_PCI_HOST_VIA82C505=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_SMP is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set -# CONFIG_DISCONTIGMEM is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_LEDS=y CONFIG_LEDS_TIMER=y # CONFIG_LEDS_CPU is not set @@ -135,6 +245,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -143,13 +259,16 @@ CONFIG_CMDLINE="" # # At least one emulation must be selected # -# CONFIG_FPE_NWFPE is not set -CONFIG_FPE_FASTFPE=y +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set @@ -158,44 +277,104 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y # -# Device Drivers +# Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # -# Generic Driver Options +# Network testing # -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # -# Memory Technology Devices (MTD) +# Device Drivers # -# CONFIG_MTD is not set # -# Parallel port support +# Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_ARC is not set # CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set @@ -210,52 +389,78 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=m +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=y -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_IDE_ARM=y -# CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -275,17 +480,20 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set @@ -296,12 +504,18 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set @@ -314,20 +528,15 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=m -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set @@ -336,123 +545,57 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -462,56 +605,69 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_CS89x0=y -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set +CONFIG_CS89x0_NOEEPROM=y # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set +# CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set - -# -# Token Ring devices -# +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -519,18 +675,17 @@ CONFIG_CS89x0=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -540,7 +695,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -553,14 +707,25 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -580,16 +745,22 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -599,90 +770,122 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# TPM devices +# Sonics Silicon Backplane # -# CONFIG_TCG_TPM is not set +# CONFIG_SSB is not set # -# I2C support +# Multifunction device drivers # -# CONFIG_I2C is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set CONFIG_FB_CYBER2000=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -691,126 +894,132 @@ CONFIG_FB_CYBER2000=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_CMPCI is not set -# CONFIG_SOUND_EMU10K1 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_ES1370 is not set -# CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ESSSOLO1 is not set -# CONFIG_SOUND_MAESTRO is not set -# CONFIG_SOUND_MAESTRO3 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_TRACEINIT is not set # CONFIG_SOUND_DMAP is not set -# CONFIG_SOUND_AD1816 is not set -# CONFIG_SOUND_AD1889 is not set -# CONFIG_SOUND_SGALAXY is not set -CONFIG_SOUND_ADLIB=m -# CONFIG_SOUND_ACI_MIXER is not set -# CONFIG_SOUND_CS4232 is not set # CONFIG_SOUND_SSCAPE is not set -# CONFIG_SOUND_GUS is not set # CONFIG_SOUND_VMIDI is not set # CONFIG_SOUND_TRIX is not set # CONFIG_SOUND_MSS is not set # CONFIG_SOUND_MPU401 is not set -# CONFIG_SOUND_NM256 is not set -# CONFIG_SOUND_MAD16 is not set # CONFIG_SOUND_PAS is not set # CONFIG_SOUND_PSS is not set CONFIG_SOUND_SB=m -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set # CONFIG_SOUND_YM3812 is not set -# CONFIG_SOUND_OPL3SA1 is not set -# CONFIG_SOUND_OPL3SA2 is not set -# CONFIG_SOUND_YMFPCI is not set # CONFIG_SOUND_UART6850 is not set # CONFIG_SOUND_AEDSP16 is not set # CONFIG_SOUND_KAHLUA is not set -# CONFIG_SOUND_ALI5455 is not set -# CONFIG_SOUND_FORTE is not set -# CONFIG_SOUND_RME96XX is not set -# CONFIG_SOUND_AD1980 is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set # -# USB support +# Special HID drivers # +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # -# USB Gadget Support +# Enable Host or Gadget support to see Inventra options # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # +# CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set +# CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -834,14 +1043,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -855,22 +1062,27 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m +CONFIG_NFSD=m +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_SUNRPC=m +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -897,11 +1109,9 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -942,30 +1152,74 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_LL is not set # @@ -973,19 +1227,23 @@ CONFIG_DEBUG_USER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index 03f783e696b..685d2b51320 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -89,7 +89,6 @@ CONFIG_ARCH_SA1100=y # CONFIG_SA1100_COLLIE is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HACKKIT is not set diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/asm/a.out.h index 79489fdcc8b..083894b2e3b 100644 --- a/arch/arm/include/asm/a.out.h +++ b/arch/arm/include/asm/a.out.h @@ -2,7 +2,7 @@ #define __ARM_A_OUT_H__ #include <linux/personality.h> -#include <asm/types.h> +#include <linux/types.h> struct exec { diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 6cbd8fdc9f1..bb7d695f390 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -46,6 +46,14 @@ # define MULTI_CACHE 1 #endif +#if defined(CONFIG_CPU_FA526) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE fa +# endif +#endif + #if defined(CONFIG_CPU_ARM926T) # ifdef _CACHE # define MULTI_CACHE 1 @@ -94,6 +102,14 @@ # endif #endif +#if defined(CONFIG_CPU_MOHAWK) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE mohawk +# endif +#endif + #if defined(CONFIG_CPU_FEROCEON) # define MULTI_CACHE 1 #endif diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 22cb14ec343..ff46dfa68a9 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -15,10 +15,20 @@ * must not be used by drivers. */ #ifndef __arch_page_to_dma + +#if !defined(CONFIG_HIGHMEM) static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) { return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page)); } +#elif defined(__pfn_to_bus) +static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) +{ + return (dma_addr_t)__pfn_to_bus(page_to_pfn(page)); +} +#else +#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM" +#endif static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { @@ -57,6 +67,8 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ extern void dma_cache_maint(const void *kaddr, size_t size, int rw); +extern void dma_cache_maint_page(struct page *page, unsigned long offset, + size_t size, int rw); /* * Return whether the given device DMA address mask can be supported @@ -316,7 +328,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, BUG_ON(!valid_dma_direction(dir)); if (!arch_is_coherent()) - dma_cache_maint(page_address(page) + offset, size, dir); + dma_cache_maint_page(page, offset, size, dir); return page_to_dma(dev, page) + offset; } diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index df5638f3643..7edf3536df2 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -19,21 +19,17 @@ #include <asm/system.h> #include <asm/scatterlist.h> -typedef unsigned int dmach_t; - #include <mach/isa-dma.h> /* - * DMA modes + * The DMA modes reflect the settings for the ISA DMA controller */ -typedef unsigned int dmamode_t; - -#define DMA_MODE_MASK 3 +#define DMA_MODE_MASK 0xcc -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_CASCADE 2 -#define DMA_AUTOINIT 4 +#define DMA_MODE_READ 0x44 +#define DMA_MODE_WRITE 0x48 +#define DMA_MODE_CASCADE 0xc0 +#define DMA_AUTOINIT 0x10 extern spinlock_t dma_spin_lock; @@ -52,44 +48,44 @@ static inline void release_dma_lock(unsigned long flags) /* Clear the 'DMA Pointer Flip Flop'. * Write 0 for LSB/MSB, 1 for MSB/LSB access. */ -#define clear_dma_ff(channel) +#define clear_dma_ff(chan) /* Set only the page register bits of the transfer address. * * NOTE: This is an architecture specific function, and should * be hidden from the drivers */ -extern void set_dma_page(dmach_t channel, char pagenr); +extern void set_dma_page(unsigned int chan, char pagenr); /* Request a DMA channel * * Some architectures may need to do allocate an interrupt */ -extern int request_dma(dmach_t channel, const char * device_id); +extern int request_dma(unsigned int chan, const char * device_id); /* Free a DMA channel * * Some architectures may need to do free an interrupt */ -extern void free_dma(dmach_t channel); +extern void free_dma(unsigned int chan); /* Enable DMA for this channel * * On some architectures, this may have other side effects like * enabling an interrupt and setting the DMA registers. */ -extern void enable_dma(dmach_t channel); +extern void enable_dma(unsigned int chan); /* Disable DMA for this channel * * On some architectures, this may have other side effects like * disabling an interrupt or whatever. */ -extern void disable_dma(dmach_t channel); +extern void disable_dma(unsigned int chan); /* Test whether the specified channel has an active DMA transfer */ -extern int dma_channel_active(dmach_t channel); +extern int dma_channel_active(unsigned int chan); /* Set the DMA scatter gather list for this channel * @@ -97,7 +93,7 @@ extern int dma_channel_active(dmach_t channel); * especially since some DMA architectures don't update the * DMA address immediately, but defer it to the enable_dma(). */ -extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); +extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg); /* Set the DMA address for this channel * @@ -105,9 +101,9 @@ extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); * especially since some DMA architectures don't update the * DMA address immediately, but defer it to the enable_dma(). */ -extern void __set_dma_addr(dmach_t channel, void *addr); -#define set_dma_addr(channel, addr) \ - __set_dma_addr(channel, bus_to_virt(addr)) +extern void __set_dma_addr(unsigned int chan, void *addr); +#define set_dma_addr(chan, addr) \ + __set_dma_addr(chan, bus_to_virt(addr)) /* Set the DMA byte count for this channel * @@ -115,7 +111,7 @@ extern void __set_dma_addr(dmach_t channel, void *addr); * especially since some DMA architectures don't update the * DMA count immediately, but defer it to the enable_dma(). */ -extern void set_dma_count(dmach_t channel, unsigned long count); +extern void set_dma_count(unsigned int chan, unsigned long count); /* Set the transfer direction for this channel * @@ -124,11 +120,11 @@ extern void set_dma_count(dmach_t channel, unsigned long count); * DMA transfer direction immediately, but defer it to the * enable_dma(). */ -extern void set_dma_mode(dmach_t channel, dmamode_t mode); +extern void set_dma_mode(unsigned int chan, unsigned int mode); /* Set the transfer speed for this channel */ -extern void set_dma_speed(dmach_t channel, int cycle_ns); +extern void set_dma_speed(unsigned int chan, int cycle_ns); /* Get DMA residue count. After a DMA transfer, this * should return zero. Reading this while a DMA transfer is @@ -136,7 +132,7 @@ extern void set_dma_speed(dmach_t channel, int cycle_ns); * If called before the channel has been used, it may return 1. * Otherwise, it returns the number of _bytes_ left to transfer. */ -extern int get_dma_residue(dmach_t channel); +extern int get_dma_residue(unsigned int chan); #ifndef NO_DMA #define NO_DMA 255 diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index a58378c343b..d7da19bcf92 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -50,6 +50,8 @@ typedef struct user_fp elf_fpregset_t; #define R_ARM_ABS32 2 #define R_ARM_CALL 28 #define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h new file mode 100644 index 00000000000..bbae919bceb --- /dev/null +++ b/arch/arm/include/asm/fixmap.h @@ -0,0 +1,41 @@ +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +/* + * Nothing too fancy for now. + * + * On ARM we already have well known fixed virtual addresses imposed by + * the architecture such as the vector page which is located at 0xffff0000, + * therefore a second level page table is already allocated covering + * 0xfff00000 upwards. + * + * The cache flushing code in proc-xscale.S uses the virtual area between + * 0xfffe0000 and 0xfffeffff. + */ + +#define FIXADDR_START 0xfff00000UL +#define FIXADDR_TOP 0xfffe0000UL +#define FIXADDR_SIZE (FIXADDR_TOP - FIXADDR_START) + +#define FIX_KMAP_BEGIN 0 +#define FIX_KMAP_END (FIXADDR_SIZE >> PAGE_SHIFT) + +#define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + if (idx >= FIX_KMAP_END) + __this_fixmap_does_not_exist(); + return __fix_to_virt(idx); +} + +static inline unsigned int virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +#endif diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h index dfb8330599f..46492a63a7c 100644 --- a/arch/arm/include/asm/hardware/scoop.h +++ b/arch/arm/include/asm/hardware/scoop.h @@ -63,7 +63,5 @@ struct scoop_pcmcia_config { extern struct scoop_pcmcia_config *platform_scoop_config; void reset_scoop(struct device *dev); -unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit); unsigned short read_scoop_reg(struct device *dev, unsigned short reg); void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h new file mode 100644 index 00000000000..7f36d00600b --- /dev/null +++ b/arch/arm/include/asm/highmem.h @@ -0,0 +1,31 @@ +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#include <asm/kmap_types.h> + +#define PKMAP_BASE (PAGE_OFFSET - PMD_SIZE) +#define LAST_PKMAP PTRS_PER_PTE +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +#define kmap_prot PAGE_KERNEL + +#define flush_cache_kmaps() flush_cache_all() + +extern pte_t *pkmap_page_table; + +#define ARCH_NEEDS_KMAP_HIGH_GET + +extern void *kmap_high(struct page *page); +extern void *kmap_high_get(struct page *page); +extern void kunmap_high(struct page *page); + +extern void *kmap(struct page *page); +extern void kunmap(struct page *page); +extern void *kmap_atomic(struct page *page, enum km_type type); +extern void kunmap_atomic(void *kvaddr, enum km_type type); +extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type); +extern struct page *kmap_atomic_to_page(const void *ptr); + +#endif diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index bda489f9f01..f7bd52b1c36 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -17,6 +17,8 @@ #define HWCAP_CRUNCH 1024 #define HWCAP_THUMBEE 2048 #define HWCAP_NEON 4096 +#define HWCAP_VFPv3 8192 +#define HWCAP_VFPv3D16 16384 #if defined(__KERNEL__) && !defined(__ASSEMBLY__) /* diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index 45def13ee17..d16ec97ec9a 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -18,6 +18,7 @@ enum km_type { KM_IRQ1, KM_SOFTIRQ0, KM_SOFTIRQ1, + KM_L2_CACHE, KM_TYPE_NR }; diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index fc7278ea714..9e614a18e68 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -15,13 +15,13 @@ struct dma_struct; typedef struct dma_struct dma_t; struct dma_ops { - int (*request)(dmach_t, dma_t *); /* optional */ - void (*free)(dmach_t, dma_t *); /* optional */ - void (*enable)(dmach_t, dma_t *); /* mandatory */ - void (*disable)(dmach_t, dma_t *); /* mandatory */ - int (*residue)(dmach_t, dma_t *); /* optional */ - int (*setspeed)(dmach_t, dma_t *, int); /* optional */ - char *type; + int (*request)(unsigned int, dma_t *); /* optional */ + void (*free)(unsigned int, dma_t *); /* optional */ + void (*enable)(unsigned int, dma_t *); /* mandatory */ + void (*disable)(unsigned int, dma_t *); /* mandatory */ + int (*residue)(unsigned int, dma_t *); /* optional */ + int (*setspeed)(unsigned int, dma_t *, int); /* optional */ + const char *type; }; struct dma_struct { @@ -34,24 +34,21 @@ struct dma_struct { unsigned int active:1; /* Transfer active */ unsigned int invalid:1; /* Address/Count changed */ - dmamode_t dma_mode; /* DMA mode */ + unsigned int dma_mode; /* DMA mode */ int speed; /* DMA speed */ unsigned int lock; /* Device is allocated */ const char *device_id; /* Device name */ - unsigned int dma_base; /* Controller base address */ - int dma_irq; /* Controller IRQ */ - struct scatterlist cur_sg; /* Current controller buffer */ - unsigned int state; - - struct dma_ops *d_ops; + const struct dma_ops *d_ops; }; -/* Prototype: void arch_dma_init(dma) - * Purpose : Initialise architecture specific DMA - * Params : dma - pointer to array of DMA structures +/* + * isa_dma_add - add an ISA-style DMA channel */ -extern void arch_dma_init(dma_t *dma); +extern int isa_dma_add(unsigned int, dma_t *dma); -extern void isa_init_dma(dma_t *dma); +/* + * Add the ISA DMA controller. Always takes channels 0-7. + */ +extern void isa_init_dma(void); diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 39d949b63e8..58cf91f38e6 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -26,6 +26,7 @@ struct map_desc { #define MT_HIGH_VECTORS 8 #define MT_MEMORY 9 #define MT_ROM 10 +#define MT_MEMORY_NONCACHED 11 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 0202a7c20e6..85763db8744 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -44,14 +44,21 @@ * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */ -#define MODULES_END (PAGE_OFFSET) -#define MODULES_VADDR (MODULES_END - 16*1048576) - +#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024) #if TASK_SIZE > MODULES_VADDR #error Top of user space clashes with start of module space #endif /* + * The highmem pkmap virtual space shares the end of the module area. + */ +#ifdef CONFIG_HIGHMEM +#define MODULES_END (PAGE_OFFSET - PMD_SIZE) +#else +#define MODULES_END (PAGE_OFFSET) +#endif + +/* * The XIP kernel gets mapped at the bottom of the module vm area. * Since we use sections to map it, this macro replaces the physical address * with its virtual address while keeping offset from the base section. @@ -181,6 +188,7 @@ static inline void *phys_to_virt(unsigned long x) #ifndef __virt_to_bus #define __virt_to_bus __virt_to_phys #define __bus_to_virt __phys_to_virt +#define __pfn_to_bus(x) ((x) << PAGE_SHIFT) #endif static inline __deprecated unsigned long virt_to_bus(void *x) diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 24b168dc31a..e4dfa69abb6 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -1,15 +1,27 @@ #ifndef _ASM_ARM_MODULE_H #define _ASM_ARM_MODULE_H -struct mod_arch_specific -{ - int foo; -}; - #define Elf_Shdr Elf32_Shdr #define Elf_Sym Elf32_Sym #define Elf_Ehdr Elf32_Ehdr +struct unwind_table; + +struct mod_arch_specific +{ +#ifdef CONFIG_ARM_UNWIND + Elf_Shdr *unw_sec_init; + Elf_Shdr *unw_sec_devinit; + Elf_Shdr *unw_sec_core; + Elf_Shdr *sec_init_text; + Elf_Shdr *sec_devinit_text; + Elf_Shdr *sec_core_text; + struct unwind_table *unwind_init; + struct unwind_table *unwind_devinit; + struct unwind_table *unwind_core; +#endif +}; + /* * Include the ARM architecture version. */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index f341c9dbd66..e6eb8a67b80 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -76,6 +76,14 @@ # endif #endif +#ifdef CONFIG_CPU_COPY_FA +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER fa +# endif +#endif + #ifdef CONFIG_CPU_SA1100 # ifdef _USER # define MULTI_USER 1 diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index db80203b68e..3976412685f 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -89,6 +89,14 @@ # define CPU_NAME cpu_arm922 # endif # endif +# ifdef CONFIG_CPU_FA526 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_fa526 +# endif +# endif # ifdef CONFIG_CPU_ARM925T # ifdef CPU_NAME # undef MULTI_CPU @@ -185,6 +193,14 @@ # define CPU_NAME cpu_xsc3 # endif # endif +# ifdef CONFIG_CPU_MOHAWK +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_mohawk +# endif +# endif # ifdef CONFIG_CPU_FEROCEON # ifdef CPU_NAME # undef MULTI_CPU diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 73192618f1c..236a06b9b7c 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -27,6 +27,8 @@ /* PTRACE_SYSCALL is 24 */ #define PTRACE_GETCRUNCHREGS 25 #define PTRACE_SETCRUNCHREGS 26 +#define PTRACE_GETVFPREGS 27 +#define PTRACE_SETVFPREGS 28 /* * PSR bits diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index f2cd18a0932..ee1304f22f9 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -14,7 +14,7 @@ #ifndef __ASMARM_SETUP_H #define __ASMARM_SETUP_H -#include <asm/types.h> +#include <linux/types.h> #define COMMAND_LINE_SIZE 1024 diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index 503843db156..c10d1aa4b48 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -43,6 +43,7 @@ #define SZ_8M 0x00800000 #define SZ_16M 0x01000000 #define SZ_32M 0x02000000 +#define SZ_48M 0x03000000 #define SZ_64M 0x04000000 #define SZ_128M 0x08000000 #define SZ_256M 0x10000000 diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h index 6817be9573a..537de4e0ef5 100644 --- a/arch/arm/include/asm/socket.h +++ b/arch/arm/include/asm/socket.h @@ -54,4 +54,7 @@ #define SO_MARK 36 +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + #endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h new file mode 100644 index 00000000000..4d0a16441b2 --- /dev/null +++ b/arch/arm/include/asm/stacktrace.h @@ -0,0 +1,15 @@ +#ifndef __ASM_STACKTRACE_H +#define __ASM_STACKTRACE_H + +struct stackframe { + unsigned long fp; + unsigned long sp; + unsigned long lr; + unsigned long pc; +}; + +extern int unwind_frame(struct stackframe *frame); +extern void walk_stackframe(struct stackframe *frame, + int (*fn)(struct stackframe *, void *), void *data); + +#endif /* __ASM_STACKTRACE_H */ diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h index 27a689be085..ca2bf2f6d6e 100644 --- a/arch/arm/include/asm/swab.h +++ b/arch/arm/include/asm/swab.h @@ -16,7 +16,7 @@ #define __ASM_ARM_SWAB_H #include <linux/compiler.h> -#include <asm/types.h> +#include <linux/types.h> #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) # define __SWAB_64_THRU_32__ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 811be55f338..bd4dc8ed53d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -97,8 +97,8 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); -void arm_machine_restart(char mode); -extern void (*arm_pm_restart)(char str); +void arm_machine_restart(char mode, const char *cmd); +extern void (*arm_pm_restart)(char str, const char *cmd); #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) @@ -125,6 +125,12 @@ extern unsigned int user_debug; : : "r" (0) : "memory") #define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ : : "r" (0) : "memory") +#elif defined(CONFIG_CPU_FA526) +#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ + : : "r" (0) : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("" : : : "memory") #else #define isb() __asm__ __volatile__ ("" : : : "memory") #define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 68b9ec82a37..4f8848260ee 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -99,6 +99,8 @@ static inline struct thread_info *current_thread_info(void) #define thread_saved_pc(tsk) \ ((unsigned long)(task_thread_info(tsk)->cpu_context.pc)) +#define thread_saved_sp(tsk) \ + ((unsigned long)(task_thread_info(tsk)->cpu_context.sp)) #define thread_saved_fp(tsk) \ ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) @@ -113,6 +115,8 @@ extern void iwmmxt_task_restore(struct thread_info *, void *); extern void iwmmxt_task_release(struct thread_info *); extern void iwmmxt_task_switch(struct thread_info *); +extern void vfp_sync_state(struct thread_info *thread); + #endif /* diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index b543a054a17..a62218013c7 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -39,6 +39,7 @@ #define TLB_V6_D_ASID (1 << 17) #define TLB_V6_I_ASID (1 << 18) +#define TLB_BTB (1 << 28) #define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ #define TLB_DCLEAN (1 << 30) #define TLB_WB (1 << 31) @@ -53,6 +54,7 @@ * v4wb - ARMv4 with write buffer without I TLB flush entry instruction * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) + * fa - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB)) * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction * v7wbi - identical to v6wbi */ @@ -89,6 +91,22 @@ # define v4_always_flags (-1UL) #endif +#define fa_tlb_flags (TLB_WB | TLB_BTB | TLB_DCLEAN | \ + TLB_V4_U_FULL | TLB_V4_U_PAGE) + +#ifdef CONFIG_CPU_TLB_FA +# define fa_possible_flags fa_tlb_flags +# define fa_always_flags fa_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB fa +# endif +#else +# define fa_possible_flags 0 +# define fa_always_flags (-1UL) +#endif + #define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ TLB_V4_I_FULL | TLB_V4_D_FULL | \ TLB_V4_I_PAGE | TLB_V4_D_PAGE) @@ -140,7 +158,7 @@ # define v4wb_always_flags (-1UL) #endif -#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ +#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ TLB_V6_I_FULL | TLB_V6_D_FULL | \ TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ TLB_V6_I_ASID | TLB_V6_D_ASID) @@ -267,6 +285,7 @@ extern struct cpu_tlb_fns cpu_tlb; v4wbi_possible_flags | \ fr_possible_flags | \ v4wb_possible_flags | \ + fa_possible_flags | \ v6wbi_possible_flags | \ v7wbi_possible_flags) @@ -275,6 +294,7 @@ extern struct cpu_tlb_fns cpu_tlb; v4wbi_always_flags & \ fr_always_flags & \ v4wb_always_flags & \ + fa_always_flags & \ v6wbi_always_flags & \ v7wbi_always_flags) @@ -297,9 +317,7 @@ static inline void local_flush_tlb_all(void) if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { + if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); dsb(); @@ -334,9 +352,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_V6_I_ASID)) asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { + if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); dsb(); @@ -374,9 +390,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { + if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); dsb(); @@ -411,9 +425,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_V6_I_PAGE)) asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { + if (tlb_flag(TLB_BTB)) { /* flush the branch target cache */ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); dsb(); diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index aa399aec568..491960bf426 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -25,5 +25,6 @@ static inline int in_exception_text(unsigned long ptr) } extern void __init early_trap_init(void); +extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame); #endif diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h new file mode 100644 index 00000000000..a5edf421005 --- /dev/null +++ b/arch/arm/include/asm/unwind.h @@ -0,0 +1,69 @@ +/* + * arch/arm/include/asm/unwind.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_UNWIND_H +#define __ASM_UNWIND_H + +#ifndef __ASSEMBLY__ + +/* Unwind reason code according the the ARM EABI documents */ +enum unwind_reason_code { + URC_OK = 0, /* operation completed successfully */ + URC_CONTINUE_UNWIND = 8, + URC_FAILURE = 9 /* unspecified failure of some kind */ +}; + +struct unwind_idx { + unsigned long addr; + unsigned long insn; +}; + +struct unwind_table { + struct list_head list; + struct unwind_idx *start; + struct unwind_idx *stop; + unsigned long begin_addr; + unsigned long end_addr; +}; + +extern struct unwind_table *unwind_table_add(unsigned long start, + unsigned long size, + unsigned long text_addr, + unsigned long text_size); +extern void unwind_table_del(struct unwind_table *tab); +extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk); + +#ifdef CONFIG_ARM_UNWIND +extern int __init unwind_init(void); +#else +static inline int __init unwind_init(void) +{ + return 0; +} +#endif + +#endif /* !__ASSEMBLY__ */ + +#ifdef CONFIG_ARM_UNWIND +#define UNWIND(code...) code +#else +#define UNWIND(code...) +#endif + +#endif /* __ASM_UNWIND_H */ diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h index 825c1e7c582..df95e050f9d 100644 --- a/arch/arm/include/asm/user.h +++ b/arch/arm/include/asm/user.h @@ -81,4 +81,13 @@ struct user{ #define HOST_TEXT_START_ADDR (u.start_code) #define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) +/* + * User specific VFP registers. If only VFPv2 is present, registers 16 to 31 + * are ignored by the ptrace system call. + */ +struct user_vfp { + unsigned long long fpregs[32]; + unsigned long fpscr; +}; + #endif /* _ARM_USER_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 4305345987d..11a5197a221 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,12 +29,14 @@ obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o +obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index f53c5829054..b121b6053cc 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -49,6 +49,33 @@ 1002: .endm +#elif defined(CONFIG_CPU_XSCALE) + + .macro addruart, rx + .endm + + .macro senduart, rd, rx + mcr p14, 0, \rd, c8, c0, 0 + .endm + + .macro busyuart, rd, rx +1001: + mrc p14, 0, \rx, c14, c0, 0 + tst \rx, #0x10000000 + beq 1001b + .endm + + .macro waituart, rd, rx + mov \rd, #0x10000000 +1001: + subs \rd, \rd, #1 + bmi 1002f + mrc p14, 0, \rx, c14, c0, 0 + tst \rx, #0x10000000 + bne 1001b +1002: + .endm + #else .macro addruart, rx diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 4a3a50495c6..0e88e46fc73 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -24,11 +24,6 @@ #include <asm/dma.h> #include <asm/mach/dma.h> -#define ISA_DMA_MODE_READ 0x44 -#define ISA_DMA_MODE_WRITE 0x48 -#define ISA_DMA_MODE_CASCADE 0xc0 -#define ISA_DMA_AUTOINIT 0x10 - #define ISA_DMA_MASK 0 #define ISA_DMA_MODE 1 #define ISA_DMA_CLRFF 2 @@ -49,38 +44,35 @@ static unsigned int isa_dma_port[8][7] = { { 0xd4, 0xd6, 0xd8, 0x48a, 0x08a, 0xcc, 0xce } }; -static int isa_get_dma_residue(dmach_t channel, dma_t *dma) +static int isa_get_dma_residue(unsigned int chan, dma_t *dma) { - unsigned int io_port = isa_dma_port[channel][ISA_DMA_COUNT]; + unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT]; int count; count = 1 + inb(io_port); count |= inb(io_port) << 8; - return channel < 4 ? count : (count << 1); + return chan < 4 ? count : (count << 1); } -static void isa_enable_dma(dmach_t channel, dma_t *dma) +static void isa_enable_dma(unsigned int chan, dma_t *dma) { if (dma->invalid) { unsigned long address, length; unsigned int mode; enum dma_data_direction direction; - mode = channel & 3; + mode = (chan & 3) | dma->dma_mode; switch (dma->dma_mode & DMA_MODE_MASK) { case DMA_MODE_READ: - mode |= ISA_DMA_MODE_READ; direction = DMA_FROM_DEVICE; break; case DMA_MODE_WRITE: - mode |= ISA_DMA_MODE_WRITE; direction = DMA_TO_DEVICE; break; case DMA_MODE_CASCADE: - mode |= ISA_DMA_MODE_CASCADE; direction = DMA_BIDIRECTIONAL; break; @@ -105,34 +97,31 @@ static void isa_enable_dma(dmach_t channel, dma_t *dma) address = dma->buf.dma_address; length = dma->buf.length - 1; - outb(address >> 16, isa_dma_port[channel][ISA_DMA_PGLO]); - outb(address >> 24, isa_dma_port[channel][ISA_DMA_PGHI]); + outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]); + outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]); - if (channel >= 4) { + if (chan >= 4) { address >>= 1; length >>= 1; } - outb(0, isa_dma_port[channel][ISA_DMA_CLRFF]); - - outb(address, isa_dma_port[channel][ISA_DMA_ADDR]); - outb(address >> 8, isa_dma_port[channel][ISA_DMA_ADDR]); + outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]); - outb(length, isa_dma_port[channel][ISA_DMA_COUNT]); - outb(length >> 8, isa_dma_port[channel][ISA_DMA_COUNT]); + outb(address, isa_dma_port[chan][ISA_DMA_ADDR]); + outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]); - if (dma->dma_mode & DMA_AUTOINIT) - mode |= ISA_DMA_AUTOINIT; + outb(length, isa_dma_port[chan][ISA_DMA_COUNT]); + outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]); - outb(mode, isa_dma_port[channel][ISA_DMA_MODE]); + outb(mode, isa_dma_port[chan][ISA_DMA_MODE]); dma->invalid = 0; } - outb(channel & 3, isa_dma_port[channel][ISA_DMA_MASK]); + outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]); } -static void isa_disable_dma(dmach_t channel, dma_t *dma) +static void isa_disable_dma(unsigned int chan, dma_t *dma) { - outb(channel | 4, isa_dma_port[channel][ISA_DMA_MASK]); + outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]); } static struct dma_ops isa_dma_ops = { @@ -160,7 +149,12 @@ static struct resource dma_resources[] = { { .end = 0x048f } }; -void __init isa_init_dma(dma_t *dma) +static dma_t isa_dma[8]; + +/* + * ISA DMA always starts at channel 0 + */ +void __init isa_init_dma(void) { /* * Try to autodetect presence of an ISA DMA controller. @@ -178,11 +172,11 @@ void __init isa_init_dma(dma_t *dma) outb(0xaa, 0x00); if (inb(0) == 0x55 && inb(0) == 0xaa) { - int channel, i; + unsigned int chan, i; - for (channel = 0; channel < 8; channel++) { - dma[channel].d_ops = &isa_dma_ops; - isa_disable_dma(channel, NULL); + for (chan = 0; chan < 8; chan++) { + isa_dma[chan].d_ops = &isa_dma_ops; + isa_disable_dma(chan, NULL); } outb(0x40, 0x0b); @@ -217,5 +211,12 @@ void __init isa_init_dma(dma_t *dma) for (i = 0; i < ARRAY_SIZE(dma_resources); i++) request_resource(&ioport_resource, dma_resources + i); + + for (chan = 0; chan < 8; chan++) { + int ret = isa_dma_add(chan, &isa_dma[chan]); + if (ret) + printk(KERN_ERR "ISADMA%u: unable to register: %d\n", + chan, ret); + } } } diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index d006085ed7e..7d5b9fb01e7 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/spinlock.h> #include <linux/errno.h> +#include <linux/scatterlist.h> #include <asm/dma.h> @@ -23,19 +24,40 @@ DEFINE_SPINLOCK(dma_spin_lock); EXPORT_SYMBOL(dma_spin_lock); -static dma_t dma_chan[MAX_DMA_CHANNELS]; +static dma_t *dma_chan[MAX_DMA_CHANNELS]; + +static inline dma_t *dma_channel(unsigned int chan) +{ + if (chan >= MAX_DMA_CHANNELS) + return NULL; + + return dma_chan[chan]; +} + +int __init isa_dma_add(unsigned int chan, dma_t *dma) +{ + if (!dma->d_ops) + return -EINVAL; + + sg_init_table(&dma->buf, 1); + + if (dma_chan[chan]) + return -EBUSY; + dma_chan[chan] = dma; + return 0; +} /* * Request DMA channel * * On certain platforms, we have to allocate an interrupt as well... */ -int request_dma(dmach_t channel, const char *device_id) +int request_dma(unsigned int chan, const char *device_id) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); int ret; - if (channel >= MAX_DMA_CHANNELS || !dma->d_ops) + if (!dma) goto bad_dma; if (xchg(&dma->lock, 1) != 0) @@ -47,7 +69,7 @@ int request_dma(dmach_t channel, const char *device_id) ret = 0; if (dma->d_ops->request) - ret = dma->d_ops->request(channel, dma); + ret = dma->d_ops->request(chan, dma); if (ret) xchg(&dma->lock, 0); @@ -55,7 +77,7 @@ int request_dma(dmach_t channel, const char *device_id) return ret; bad_dma: - printk(KERN_ERR "dma: trying to allocate DMA%d\n", channel); + printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan); return -EINVAL; busy: @@ -68,42 +90,42 @@ EXPORT_SYMBOL(request_dma); * * On certain platforms, we have to free interrupt as well... */ -void free_dma(dmach_t channel) +void free_dma(unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); - if (channel >= MAX_DMA_CHANNELS || !dma->d_ops) + if (!dma) goto bad_dma; if (dma->active) { - printk(KERN_ERR "dma%d: freeing active DMA\n", channel); - dma->d_ops->disable(channel, dma); + printk(KERN_ERR "dma%d: freeing active DMA\n", chan); + dma->d_ops->disable(chan, dma); dma->active = 0; } if (xchg(&dma->lock, 0) != 0) { if (dma->d_ops->free) - dma->d_ops->free(channel, dma); + dma->d_ops->free(chan, dma); return; } - printk(KERN_ERR "dma%d: trying to free free DMA\n", channel); + printk(KERN_ERR "dma%d: trying to free free DMA\n", chan); return; bad_dma: - printk(KERN_ERR "dma: trying to free DMA%d\n", channel); + printk(KERN_ERR "dma: trying to free DMA%d\n", chan); } EXPORT_SYMBOL(free_dma); /* Set DMA Scatter-Gather list */ -void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg) +void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA SG while " - "DMA active\n", channel); + "DMA active\n", chan); dma->sg = sg; dma->sgcount = nr_sg; @@ -115,13 +137,13 @@ EXPORT_SYMBOL(set_dma_sg); * * Copy address to the structure, and set the invalid bit */ -void __set_dma_addr (dmach_t channel, void *addr) +void __set_dma_addr (unsigned int chan, void *addr) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA address while " - "DMA active\n", channel); + "DMA active\n", chan); dma->sg = NULL; dma->addr = addr; @@ -133,13 +155,13 @@ EXPORT_SYMBOL(__set_dma_addr); * * Copy address to the structure, and set the invalid bit */ -void set_dma_count (dmach_t channel, unsigned long count) +void set_dma_count (unsigned int chan, unsigned long count) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA count while " - "DMA active\n", channel); + "DMA active\n", chan); dma->sg = NULL; dma->count = count; @@ -149,13 +171,13 @@ EXPORT_SYMBOL(set_dma_count); /* Set DMA direction mode */ -void set_dma_mode (dmach_t channel, dmamode_t mode) +void set_dma_mode (unsigned int chan, unsigned int mode) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); if (dma->active) printk(KERN_ERR "dma%d: altering DMA mode while " - "DMA active\n", channel); + "DMA active\n", chan); dma->dma_mode = mode; dma->invalid = 1; @@ -164,42 +186,42 @@ EXPORT_SYMBOL(set_dma_mode); /* Enable DMA channel */ -void enable_dma (dmach_t channel) +void enable_dma (unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); if (!dma->lock) goto free_dma; if (dma->active == 0) { dma->active = 1; - dma->d_ops->enable(channel, dma); + dma->d_ops->enable(chan, dma); } return; free_dma: - printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel); + printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan); BUG(); } EXPORT_SYMBOL(enable_dma); /* Disable DMA channel */ -void disable_dma (dmach_t channel) +void disable_dma (unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); if (!dma->lock) goto free_dma; if (dma->active == 1) { dma->active = 0; - dma->d_ops->disable(channel, dma); + dma->d_ops->disable(chan, dma); } return; free_dma: - printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel); + printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan); BUG(); } EXPORT_SYMBOL(disable_dma); @@ -207,45 +229,38 @@ EXPORT_SYMBOL(disable_dma); /* * Is the specified DMA channel active? */ -int dma_channel_active(dmach_t channel) +int dma_channel_active(unsigned int chan) { - return dma_chan[channel].active; + dma_t *dma = dma_channel(chan); + return dma->active; } EXPORT_SYMBOL(dma_channel_active); -void set_dma_page(dmach_t channel, char pagenr) +void set_dma_page(unsigned int chan, char pagenr) { - printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel); + printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan); } EXPORT_SYMBOL(set_dma_page); -void set_dma_speed(dmach_t channel, int cycle_ns) +void set_dma_speed(unsigned int chan, int cycle_ns) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); int ret = 0; if (dma->d_ops->setspeed) - ret = dma->d_ops->setspeed(channel, dma, cycle_ns); + ret = dma->d_ops->setspeed(chan, dma, cycle_ns); dma->speed = ret; } EXPORT_SYMBOL(set_dma_speed); -int get_dma_residue(dmach_t channel) +int get_dma_residue(unsigned int chan) { - dma_t *dma = dma_chan + channel; + dma_t *dma = dma_channel(chan); int ret = 0; if (dma->d_ops->residue) - ret = dma->d_ops->residue(channel, dma); + ret = dma->d_ops->residue(chan, dma); return ret; } EXPORT_SYMBOL(get_dma_residue); - -static int __init init_dma(void) -{ - arch_dma_init(dma_chan); - return 0; -} - -core_initcall(init_dma); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 85040cfeb5e..d662a2f1fd8 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -20,6 +20,7 @@ #include <asm/vfpmacros.h> #include <mach/entry-macro.S> #include <asm/thread_notify.h> +#include <asm/unwind.h> #include "entry-header.S" @@ -123,6 +124,8 @@ ENDPROC(__und_invalid) #endif .macro svc_entry, stack_hole=0 + UNWIND(.fnstart ) + UNWIND(.save {r0 - pc} ) sub sp, sp, #(S_FRAME_SIZE + \stack_hole) SPFIX( tst sp, #4 ) SPFIX( bicne sp, sp, #4 ) @@ -196,6 +199,7 @@ __dabt_svc: ldr r0, [sp, #S_PSR] msr spsr_cxsf, r0 ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr + UNWIND(.fnend ) ENDPROC(__dabt_svc) .align 5 @@ -228,6 +232,7 @@ __irq_svc: bleq trace_hardirqs_on #endif ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr + UNWIND(.fnend ) ENDPROC(__irq_svc) .ltorg @@ -278,6 +283,7 @@ __und_svc: ldr lr, [sp, #S_PSR] @ Get SVC cpsr msr spsr_cxsf, lr ldmia sp, {r0 - pc}^ @ Restore SVC registers + UNWIND(.fnend ) ENDPROC(__und_svc) .align 5 @@ -320,6 +326,7 @@ __pabt_svc: ldr r0, [sp, #S_PSR] msr spsr_cxsf, r0 ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr + UNWIND(.fnend ) ENDPROC(__pabt_svc) .align 5 @@ -343,6 +350,8 @@ ENDPROC(__pabt_svc) #endif .macro usr_entry + UNWIND(.fnstart ) + UNWIND(.cantunwind ) @ don't unwind the user space sub sp, sp, #S_FRAME_SIZE stmib sp, {r1 - r12} @@ -420,6 +429,7 @@ __dabt_usr: mov r2, sp adr lr, ret_from_exception b do_DataAbort + UNWIND(.fnend ) ENDPROC(__dabt_usr) .align 5 @@ -450,6 +460,7 @@ __irq_usr: mov why, #0 b ret_to_user + UNWIND(.fnend ) ENDPROC(__irq_usr) .ltorg @@ -484,6 +495,7 @@ __und_usr: #else b __und_usr_unknown #endif + UNWIND(.fnend ) ENDPROC(__und_usr) @ @@ -671,14 +683,18 @@ __pabt_usr: enable_irq @ Enable interrupts mov r1, sp @ regs bl do_PrefetchAbort @ call abort handler + UNWIND(.fnend ) /* fall through */ /* * This is the return code to user mode for abort handlers */ ENTRY(ret_from_exception) + UNWIND(.fnstart ) + UNWIND(.cantunwind ) get_thread_info tsk mov why, #0 b ret_to_user + UNWIND(.fnend ) ENDPROC(__pabt_usr) ENDPROC(ret_from_exception) @@ -688,6 +704,8 @@ ENDPROC(ret_from_exception) * previous and next are guaranteed not to be the same. */ ENTRY(__switch_to) + UNWIND(.fnstart ) + UNWIND(.cantunwind ) add ip, r1, #TI_CPU_SAVE ldr r3, [r2, #TI_TP_VALUE] stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack @@ -717,6 +735,7 @@ ENTRY(__switch_to) bl atomic_notifier_call_chain mov r0, r5 ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously + UNWIND(.fnend ) ENDPROC(__switch_to) __INIT diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 159d0416f27..b55cb033180 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -11,6 +11,7 @@ #include <asm/unistd.h> #include <asm/ftrace.h> #include <mach/entry-macro.S> +#include <asm/unwind.h> #include "entry-header.S" @@ -22,6 +23,8 @@ * stack. */ ret_fast_syscall: + UNWIND(.fnstart ) + UNWIND(.cantunwind ) disable_irq @ disable interrupts ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK @@ -38,6 +41,7 @@ ret_fast_syscall: mov r0, r0 add sp, sp, #S_FRAME_SIZE - S_PC movs pc, lr @ return & move spsr_svc into cpsr + UNWIND(.fnend ) /* * Ok, we need to do extra processing, enter the slow path. diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 363db186cb9..6874c7dca75 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -76,7 +76,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%3d: ", i); for_each_present_cpu(cpu) - seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]); + seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu)); seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-"); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) @@ -104,6 +104,11 @@ static struct irq_desc bad_irq_desc = { .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), }; +#ifdef CONFIG_CPUMASK_OFFSTACK +/* We are not allocating bad_irq_desc.affinity or .pending_mask */ +#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." +#endif + /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -161,7 +166,7 @@ void __init init_IRQ(void) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; #ifdef CONFIG_SMP - bad_irq_desc.affinity = CPU_MASK_ALL; + cpumask_setall(bad_irq_desc.affinity); bad_irq_desc.cpu = smp_processor_id(); #endif init_arch_irq(); @@ -191,15 +196,16 @@ void migrate_irqs(void) struct irq_desc *desc = irq_desc + i; if (desc->cpu == cpu) { - unsigned int newcpu = any_online_cpu(desc->affinity); - - if (newcpu == NR_CPUS) { + unsigned int newcpu = cpumask_any_and(desc->affinity, + cpu_online_mask); + if (newcpu >= nr_cpu_ids) { if (printk_ratelimit()) printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", i, cpu); - cpus_setall(desc->affinity); - newcpu = any_online_cpu(desc->affinity); + cpumask_setall(desc->affinity); + newcpu = cpumask_any_and(desc->affinity, + cpu_online_mask); } route_irq(desc, i, newcpu); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index dab48f27263..d1731e39b49 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -22,6 +22,7 @@ #include <asm/pgtable.h> #include <asm/sections.h> +#include <asm/unwind.h> #ifdef CONFIG_XIP_KERNEL /* @@ -66,6 +67,24 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, char *secstrings, struct module *mod) { +#ifdef CONFIG_ARM_UNWIND + Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + + for (s = sechdrs; s < sechdrs_end; s++) { + if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0) + mod->arch.unw_sec_init = s; + else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0) + mod->arch.unw_sec_devinit = s; + else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0) + mod->arch.unw_sec_core = s; + else if (strcmp(".init.text", secstrings + s->sh_name) == 0) + mod->arch.sec_init_text = s; + else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0) + mod->arch.sec_devinit_text = s; + else if (strcmp(".text", secstrings + s->sh_name) == 0) + mod->arch.sec_core_text = s; + } +#endif return 0; } @@ -104,6 +123,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, loc = dstsec->sh_addr + rel->r_offset; switch (ELF32_R_TYPE(rel->r_info)) { + case R_ARM_NONE: + /* ignore */ + break; + case R_ARM_ABS32: *(u32 *)loc += sym->st_value; break; @@ -132,6 +155,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc |= offset & 0x00ffffff; break; + case R_ARM_V4BX: + /* Preserve Rm and the condition code. Alter + * other bits to re-code instruction as + * MOV PC,Rm. + */ + *(u32 *)loc &= 0xf000000f; + *(u32 *)loc |= 0x01a0f000; + break; + + case R_ARM_PREL31: + offset = *(u32 *)loc + sym->st_value - loc; + *(u32 *)loc = offset & 0x7fffffff; + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); @@ -150,14 +187,50 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, return -ENOEXEC; } +#ifdef CONFIG_ARM_UNWIND +static void register_unwind_tables(struct module *mod) +{ + if (mod->arch.unw_sec_init && mod->arch.sec_init_text) + mod->arch.unwind_init = + unwind_table_add(mod->arch.unw_sec_init->sh_addr, + mod->arch.unw_sec_init->sh_size, + mod->arch.sec_init_text->sh_addr, + mod->arch.sec_init_text->sh_size); + if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text) + mod->arch.unwind_devinit = + unwind_table_add(mod->arch.unw_sec_devinit->sh_addr, + mod->arch.unw_sec_devinit->sh_size, + mod->arch.sec_devinit_text->sh_addr, + mod->arch.sec_devinit_text->sh_size); + if (mod->arch.unw_sec_core && mod->arch.sec_core_text) + mod->arch.unwind_core = + unwind_table_add(mod->arch.unw_sec_core->sh_addr, + mod->arch.unw_sec_core->sh_size, + mod->arch.sec_core_text->sh_addr, + mod->arch.sec_core_text->sh_size); +} + +static void unregister_unwind_tables(struct module *mod) +{ + unwind_table_del(mod->arch.unwind_init); + unwind_table_del(mod->arch.unwind_devinit); + unwind_table_del(mod->arch.unwind_core); +} +#else +static inline void register_unwind_tables(struct module *mod) { } +static inline void unregister_unwind_tables(struct module *mod) { } +#endif + int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *module) { + register_unwind_tables(module); return 0; } void module_arch_cleanup(struct module *mod) { + unregister_unwind_tables(mod); } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d3ea6fa8952..2de14e2afdc 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -34,6 +34,7 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/thread_notify.h> +#include <asm/stacktrace.h> #include <asm/mach/time.h> static const char *processor_modes[] = { @@ -82,7 +83,7 @@ static int __init hlt_setup(char *__unused) __setup("nohlt", nohlt_setup); __setup("hlt", hlt_setup); -void arm_machine_restart(char mode) +void arm_machine_restart(char mode, const char *cmd) { /* * Clean and disable cache, and turn off interrupts @@ -99,7 +100,7 @@ void arm_machine_restart(char mode) /* * Now call the architecture specific reboot code. */ - arch_reset(mode); + arch_reset(mode, cmd); /* * Whoops - the architecture was unable to reboot. @@ -119,7 +120,7 @@ EXPORT_SYMBOL(pm_idle); void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -void (*arm_pm_restart)(char str) = arm_machine_restart; +void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart; EXPORT_SYMBOL_GPL(arm_pm_restart); @@ -194,9 +195,9 @@ void machine_power_off(void) pm_power_off(); } -void machine_restart(char * __unused) +void machine_restart(char *cmd) { - arm_pm_restart(reboot_mode); + arm_pm_restart(reboot_mode, cmd); } void __show_regs(struct pt_regs *regs) @@ -372,23 +373,21 @@ EXPORT_SYMBOL(kernel_thread); unsigned long get_wchan(struct task_struct *p) { - unsigned long fp, lr; - unsigned long stack_start, stack_end; + struct stackframe frame; int count = 0; if (!p || p == current || p->state == TASK_RUNNING) return 0; - stack_start = (unsigned long)end_of_stack(p); - stack_end = (unsigned long)task_stack_page(p) + THREAD_SIZE; - - fp = thread_saved_fp(p); + frame.fp = thread_saved_fp(p); + frame.sp = thread_saved_sp(p); + frame.lr = 0; /* recovered from the stack */ + frame.pc = thread_saved_pc(p); do { - if (fp < stack_start || fp > stack_end) + int ret = unwind_frame(&frame); + if (ret < 0) return 0; - lr = ((unsigned long *)fp)[-1]; - if (!in_sched_functions(lr)) - return lr; - fp = *(unsigned long *) (fp - 12); + if (!in_sched_functions(frame.pc)) + return frame.pc; } while (count ++ < 16); return 0; } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index df653ea5925..89882a1d018 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -653,6 +653,54 @@ static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp) } #endif +#ifdef CONFIG_VFP +/* + * Get the child VFP state. + */ +static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data) +{ + struct thread_info *thread = task_thread_info(tsk); + union vfp_state *vfp = &thread->vfpstate; + struct user_vfp __user *ufp = data; + + vfp_sync_state(thread); + + /* copy the floating point registers */ + if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs, + sizeof(vfp->hard.fpregs))) + return -EFAULT; + + /* copy the status and control register */ + if (put_user(vfp->hard.fpscr, &ufp->fpscr)) + return -EFAULT; + + return 0; +} + +/* + * Set the child VFP state. + */ +static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data) +{ + struct thread_info *thread = task_thread_info(tsk); + union vfp_state *vfp = &thread->vfpstate; + struct user_vfp __user *ufp = data; + + vfp_sync_state(thread); + + /* copy the floating point registers */ + if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs, + sizeof(vfp->hard.fpregs))) + return -EFAULT; + + /* copy the status and control register */ + if (get_user(vfp->hard.fpscr, &ufp->fpscr)) + return -EFAULT; + + return 0; +} +#endif + long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; @@ -775,6 +823,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; #endif +#ifdef CONFIG_VFP + case PTRACE_GETVFPREGS: + ret = ptrace_getvfpregs(child, (void __user *)data); + break; + + case PTRACE_SETVFPREGS: + ret = ptrace_setvfpregs(child, (void __user *)data); + break; +#endif + default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 68d6494c038..bc5e4128f9f 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -40,6 +40,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <asm/traps.h> +#include <asm/unwind.h> #include "compat.h" #include "atags.h" @@ -685,6 +686,8 @@ void __init setup_arch(char **cmdline_p) struct machine_desc *mdesc; char *from = default_command_line; + unwind_init(); + setup_processor(); mdesc = setup_machine(machine_arch_type); machine_name = mdesc->name; @@ -780,6 +783,8 @@ static const char *hwcap_str[] = { "crunch", "thumbee", "neon", + "vfpv3", + "vfpv3d16", NULL }; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 55fa7ff96a3..7801aac3c04 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -93,6 +93,7 @@ int __cpuinit __cpu_up(unsigned int cpu) pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET); *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | PMD_TYPE_SECT | PMD_SECT_AP_WRITE); + flush_pmd_entry(pmd); /* * We need to tell the secondary core where to find @@ -130,6 +131,7 @@ int __cpuinit __cpu_up(unsigned int cpu) secondary_data.pgdir = 0; *pmd = __pmd(0); + clean_pmd_entry(pmd); pgd_free(&init_mm, pgd); if (ret) { diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index fc650f64df4..9f444e5cc16 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -2,35 +2,60 @@ #include <linux/sched.h> #include <linux/stacktrace.h> -#include "stacktrace.h" - -int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high, - int (*fn)(struct stackframe *, void *), void *data) +#include <asm/stacktrace.h> + +#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) +/* + * Unwind the current stack frame and store the new register values in the + * structure passed as argument. Unwinding is equivalent to a function return, + * hence the new PC value rather than LR should be used for backtrace. + * + * With framepointer enabled, a simple function prologue looks like this: + * mov ip, sp + * stmdb sp!, {fp, ip, lr, pc} + * sub fp, ip, #4 + * + * A simple function epilogue looks like this: + * ldm sp, {fp, sp, pc} + * + * Note that with framepointer enabled, even the leaf functions have the same + * prologue and epilogue, therefore we can ignore the LR value in this case. + */ +int unwind_frame(struct stackframe *frame) { - struct stackframe *frame; - - do { - /* - * Check current frame pointer is within bounds - */ - if (fp < (low + 12) || fp + 4 >= high) - break; + unsigned long high, low; + unsigned long fp = frame->fp; - frame = (struct stackframe *)(fp - 12); + /* only go to a higher address on the stack */ + low = frame->sp; + high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; - if (fn(frame, data)) - break; + /* check current frame pointer is within bounds */ + if (fp < (low + 12) || fp + 4 >= high) + return -EINVAL; - /* - * Update the low bound - the next frame must always - * be at a higher address than the current frame. - */ - low = fp + 4; - fp = frame->fp; - } while (fp); + /* restore the registers from the stack frame */ + frame->fp = *(unsigned long *)(fp - 12); + frame->sp = *(unsigned long *)(fp - 8); + frame->pc = *(unsigned long *)(fp - 4); return 0; } +#endif + +void walk_stackframe(struct stackframe *frame, + int (*fn)(struct stackframe *, void *), void *data) +{ + while (1) { + int ret; + + if (fn(frame, data)) + break; + ret = unwind_frame(frame); + if (ret < 0) + break; + } +} EXPORT_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE @@ -44,7 +69,7 @@ static int save_trace(struct stackframe *frame, void *d) { struct stack_trace_data *data = d; struct stack_trace *trace = data->trace; - unsigned long addr = frame->lr; + unsigned long addr = frame->pc; if (data->no_sched_functions && in_sched_functions(addr)) return 0; @@ -61,11 +86,10 @@ static int save_trace(struct stackframe *frame, void *d) void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) { struct stack_trace_data data; - unsigned long fp, base; + struct stackframe frame; data.trace = trace; data.skip = trace->skip; - base = (unsigned long)task_stack_page(tsk); if (tsk != current) { #ifdef CONFIG_SMP @@ -76,14 +100,22 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) BUG(); #else data.no_sched_functions = 1; - fp = thread_saved_fp(tsk); + frame.fp = thread_saved_fp(tsk); + frame.sp = thread_saved_sp(tsk); + frame.lr = 0; /* recovered from the stack */ + frame.pc = thread_saved_pc(tsk); #endif } else { + register unsigned long current_sp asm ("sp"); + data.no_sched_functions = 0; - asm("mov %0, fp" : "=r" (fp)); + frame.fp = (unsigned long)__builtin_frame_address(0); + frame.sp = current_sp; + frame.lr = (unsigned long)__builtin_return_address(0); + frame.pc = (unsigned long)save_stack_trace_tsk; } - walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data); + walk_stackframe(&frame, save_trace, &data); if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } diff --git a/arch/arm/kernel/stacktrace.h b/arch/arm/kernel/stacktrace.h deleted file mode 100644 index e9fd20cb566..00000000000 --- a/arch/arm/kernel/stacktrace.h +++ /dev/null @@ -1,9 +0,0 @@ -struct stackframe { - unsigned long fp; - unsigned long sp; - unsigned long lr; - unsigned long pc; -}; - -int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high, - int (*fn)(struct stackframe *, void *), void *data); diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index c68b44aa88d..4cdc4a0bd02 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -33,6 +33,7 @@ #include <asm/leds.h> #include <asm/thread_info.h> +#include <asm/stacktrace.h> #include <asm/mach/time.h> /* @@ -55,14 +56,22 @@ EXPORT_SYMBOL(rtc_lock); #ifdef CONFIG_SMP unsigned long profile_pc(struct pt_regs *regs) { - unsigned long fp, pc = instruction_pointer(regs); + struct stackframe frame; - if (in_lock_functions(pc)) { - fp = regs->ARM_fp; - pc = ((unsigned long *)fp)[-1]; - } + if (!in_lock_functions(regs->ARM_pc)) + return regs->ARM_pc; + + frame.fp = regs->ARM_fp; + frame.sp = regs->ARM_sp; + frame.lr = regs->ARM_lr; + frame.pc = regs->ARM_pc; + do { + int ret = unwind_frame(&frame); + if (ret < 0) + return 0; + } while (in_lock_functions(frame.pc)); - return pc; + return frame.pc; } EXPORT_SYMBOL(profile_pc); #endif diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 79abc4ddc0c..57eb0f6f600 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -27,6 +27,7 @@ #include <asm/system.h> #include <asm/unistd.h> #include <asm/traps.h> +#include <asm/unwind.h> #include "ptrace.h" #include "signal.h" @@ -61,6 +62,7 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); } +#ifndef CONFIG_ARM_UNWIND /* * Stack pointers should always be within the kernels view of * physical memory. If it is not there, then we can't dump @@ -74,6 +76,7 @@ static int verify_stack(unsigned long sp) return 0; } +#endif /* * Dump out the contents of some memory nicely... @@ -150,13 +153,33 @@ static void dump_instr(struct pt_regs *regs) set_fs(fs); } +#ifdef CONFIG_ARM_UNWIND +static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) +{ + unwind_backtrace(regs, tsk); +} +#else static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) { - unsigned int fp; + unsigned int fp, mode; int ok = 1; printk("Backtrace: "); - fp = regs->ARM_fp; + + if (!tsk) + tsk = current; + + if (regs) { + fp = regs->ARM_fp; + mode = processor_mode(regs); + } else if (tsk != current) { + fp = thread_saved_fp(tsk); + mode = 0x10; + } else { + asm("mov %0, fp" : "=r" (fp) : : "cc"); + mode = 0x10; + } + if (!fp) { printk("no frame pointer"); ok = 0; @@ -168,29 +191,20 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) printk("\n"); if (ok) - c_backtrace(fp, processor_mode(regs)); + c_backtrace(fp, mode); } +#endif void dump_stack(void) { - __backtrace(); + dump_backtrace(NULL, NULL); } EXPORT_SYMBOL(dump_stack); void show_stack(struct task_struct *tsk, unsigned long *sp) { - unsigned long fp; - - if (!tsk) - tsk = current; - - if (tsk != current) - fp = thread_saved_fp(tsk); - else - asm("mov %0, fp" : "=r" (fp) : : "cc"); - - c_backtrace(fp, 0x10); + dump_backtrace(NULL, tsk); barrier(); } diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c new file mode 100644 index 00000000000..1dedc2c7ff4 --- /dev/null +++ b/arch/arm/kernel/unwind.c @@ -0,0 +1,434 @@ +/* + * arch/arm/kernel/unwind.c + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Stack unwinding support for ARM + * + * An ARM EABI version of gcc is required to generate the unwind + * tables. For information about the structure of the unwind tables, + * see "Exception Handling ABI for the ARM Architecture" at: + * + * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/list.h> + +#include <asm/stacktrace.h> +#include <asm/traps.h> +#include <asm/unwind.h> + +/* Dummy functions to avoid linker complaints */ +void __aeabi_unwind_cpp_pr0(void) +{ +}; +EXPORT_SYMBOL(__aeabi_unwind_cpp_pr0); + +void __aeabi_unwind_cpp_pr1(void) +{ +}; +EXPORT_SYMBOL(__aeabi_unwind_cpp_pr1); + +void __aeabi_unwind_cpp_pr2(void) +{ +}; +EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2); + +struct unwind_ctrl_block { + unsigned long vrs[16]; /* virtual register set */ + unsigned long *insn; /* pointer to the current instructions word */ + int entries; /* number of entries left to interpret */ + int byte; /* current byte number in the instructions word */ +}; + +enum regs { + FP = 11, + SP = 13, + LR = 14, + PC = 15 +}; + +extern struct unwind_idx __start_unwind_idx[]; +extern struct unwind_idx __stop_unwind_idx[]; + +static DEFINE_SPINLOCK(unwind_lock); +static LIST_HEAD(unwind_tables); + +/* Convert a prel31 symbol to an absolute address */ +#define prel31_to_addr(ptr) \ +({ \ + /* sign-extend to 32 bits */ \ + long offset = (((long)*(ptr)) << 1) >> 1; \ + (unsigned long)(ptr) + offset; \ +}) + +/* + * Binary search in the unwind index. The entries entries are + * guaranteed to be sorted in ascending order by the linker. + */ +static struct unwind_idx *search_index(unsigned long addr, + struct unwind_idx *first, + struct unwind_idx *last) +{ + pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last); + + if (addr < first->addr) { + pr_warning("unwind: Unknown symbol address %08lx\n", addr); + return NULL; + } else if (addr >= last->addr) + return last; + + while (first < last - 1) { + struct unwind_idx *mid = first + ((last - first + 1) >> 1); + + if (addr < mid->addr) + last = mid; + else + first = mid; + } + + return first; +} + +static struct unwind_idx *unwind_find_idx(unsigned long addr) +{ + struct unwind_idx *idx = NULL; + unsigned long flags; + + pr_debug("%s(%08lx)\n", __func__, addr); + + if (core_kernel_text(addr)) + /* main unwind table */ + idx = search_index(addr, __start_unwind_idx, + __stop_unwind_idx - 1); + else { + /* module unwind tables */ + struct unwind_table *table; + + spin_lock_irqsave(&unwind_lock, flags); + list_for_each_entry(table, &unwind_tables, list) { + if (addr >= table->begin_addr && + addr < table->end_addr) { + idx = search_index(addr, table->start, + table->stop - 1); + break; + } + } + spin_unlock_irqrestore(&unwind_lock, flags); + } + + pr_debug("%s: idx = %p\n", __func__, idx); + return idx; +} + +static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl) +{ + unsigned long ret; + + if (ctrl->entries <= 0) { + pr_warning("unwind: Corrupt unwind table\n"); + return 0; + } + + ret = (*ctrl->insn >> (ctrl->byte * 8)) & 0xff; + + if (ctrl->byte == 0) { + ctrl->insn++; + ctrl->entries--; + ctrl->byte = 3; + } else + ctrl->byte--; + + return ret; +} + +/* + * Execute the current unwind instruction. + */ +static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) +{ + unsigned long insn = unwind_get_byte(ctrl); + + pr_debug("%s: insn = %08lx\n", __func__, insn); + + if ((insn & 0xc0) == 0x00) + ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4; + else if ((insn & 0xc0) == 0x40) + ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4; + else if ((insn & 0xf0) == 0x80) { + unsigned long mask; + unsigned long *vsp = (unsigned long *)ctrl->vrs[SP]; + int load_sp, reg = 4; + + insn = (insn << 8) | unwind_get_byte(ctrl); + mask = insn & 0x0fff; + if (mask == 0) { + pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n", + insn); + return -URC_FAILURE; + } + + /* pop R4-R15 according to mask */ + load_sp = mask & (1 << (13 - 4)); + while (mask) { + if (mask & 1) + ctrl->vrs[reg] = *vsp++; + mask >>= 1; + reg++; + } + if (!load_sp) + ctrl->vrs[SP] = (unsigned long)vsp; + } else if ((insn & 0xf0) == 0x90 && + (insn & 0x0d) != 0x0d) + ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f]; + else if ((insn & 0xf0) == 0xa0) { + unsigned long *vsp = (unsigned long *)ctrl->vrs[SP]; + int reg; + + /* pop R4-R[4+bbb] */ + for (reg = 4; reg <= 4 + (insn & 7); reg++) + ctrl->vrs[reg] = *vsp++; + if (insn & 0x80) + ctrl->vrs[14] = *vsp++; + ctrl->vrs[SP] = (unsigned long)vsp; + } else if (insn == 0xb0) { + ctrl->vrs[PC] = ctrl->vrs[LR]; + /* no further processing */ + ctrl->entries = 0; + } else if (insn == 0xb1) { + unsigned long mask = unwind_get_byte(ctrl); + unsigned long *vsp = (unsigned long *)ctrl->vrs[SP]; + int reg = 0; + + if (mask == 0 || mask & 0xf0) { + pr_warning("unwind: Spare encoding %04lx\n", + (insn << 8) | mask); + return -URC_FAILURE; + } + + /* pop R0-R3 according to mask */ + while (mask) { + if (mask & 1) + ctrl->vrs[reg] = *vsp++; + mask >>= 1; + reg++; + } + ctrl->vrs[SP] = (unsigned long)vsp; + } else if (insn == 0xb2) { + unsigned long uleb128 = unwind_get_byte(ctrl); + + ctrl->vrs[SP] += 0x204 + (uleb128 << 2); + } else { + pr_warning("unwind: Unhandled instruction %02lx\n", insn); + return -URC_FAILURE; + } + + pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__, + ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]); + + return URC_OK; +} + +/* + * Unwind a single frame starting with *sp for the symbol at *pc. It + * updates the *pc and *sp with the new values. + */ +int unwind_frame(struct stackframe *frame) +{ + unsigned long high, low; + struct unwind_idx *idx; + struct unwind_ctrl_block ctrl; + + /* only go to a higher address on the stack */ + low = frame->sp; + high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; + + pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__, + frame->pc, frame->lr, frame->sp); + + if (!kernel_text_address(frame->pc)) + return -URC_FAILURE; + + idx = unwind_find_idx(frame->pc); + if (!idx) { + pr_warning("unwind: Index not found %08lx\n", frame->pc); + return -URC_FAILURE; + } + + ctrl.vrs[FP] = frame->fp; + ctrl.vrs[SP] = frame->sp; + ctrl.vrs[LR] = frame->lr; + ctrl.vrs[PC] = 0; + + if (idx->insn == 1) + /* can't unwind */ + return -URC_FAILURE; + else if ((idx->insn & 0x80000000) == 0) + /* prel31 to the unwind table */ + ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn); + else if ((idx->insn & 0xff000000) == 0x80000000) + /* only personality routine 0 supported in the index */ + ctrl.insn = &idx->insn; + else { + pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n", + idx->insn, idx); + return -URC_FAILURE; + } + + /* check the personality routine */ + if ((*ctrl.insn & 0xff000000) == 0x80000000) { + ctrl.byte = 2; + ctrl.entries = 1; + } else if ((*ctrl.insn & 0xff000000) == 0x81000000) { + ctrl.byte = 1; + ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16); + } else { + pr_warning("unwind: Unsupported personality routine %08lx at %p\n", + *ctrl.insn, ctrl.insn); + return -URC_FAILURE; + } + + while (ctrl.entries > 0) { + int urc; + + if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high) + return -URC_FAILURE; + urc = unwind_exec_insn(&ctrl); + if (urc < 0) + return urc; + } + + if (ctrl.vrs[PC] == 0) + ctrl.vrs[PC] = ctrl.vrs[LR]; + + frame->fp = ctrl.vrs[FP]; + frame->sp = ctrl.vrs[SP]; + frame->lr = ctrl.vrs[LR]; + frame->pc = ctrl.vrs[PC]; + + return URC_OK; +} + +void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk) +{ + struct stackframe frame; + unsigned long high, low; + register unsigned long current_sp asm ("sp"); + + pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk); + + if (!tsk) + tsk = current; + + if (regs) { + frame.fp = regs->ARM_fp; + frame.sp = regs->ARM_sp; + frame.lr = regs->ARM_lr; + frame.pc = regs->ARM_pc; + } else if (tsk == current) { + frame.fp = (unsigned long)__builtin_frame_address(0); + frame.sp = current_sp; + frame.lr = (unsigned long)__builtin_return_address(0); + frame.pc = (unsigned long)unwind_backtrace; + } else { + /* task blocked in __switch_to */ + frame.fp = thread_saved_fp(tsk); + frame.sp = thread_saved_sp(tsk); + /* + * The function calling __switch_to cannot be a leaf function + * so LR is recovered from the stack. + */ + frame.lr = 0; + frame.pc = thread_saved_pc(tsk); + } + + low = frame.sp & ~(THREAD_SIZE - 1); + high = low + THREAD_SIZE; + + while (1) { + int urc; + unsigned long where = frame.pc; + + urc = unwind_frame(&frame); + if (urc < 0) + break; + dump_backtrace_entry(where, frame.pc, frame.sp - 4); + } +} + +struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, + unsigned long text_addr, + unsigned long text_size) +{ + unsigned long flags; + struct unwind_idx *idx; + struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL); + + pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size, + text_addr, text_size); + + if (!tab) + return tab; + + tab->start = (struct unwind_idx *)start; + tab->stop = (struct unwind_idx *)(start + size); + tab->begin_addr = text_addr; + tab->end_addr = text_addr + text_size; + + /* Convert the symbol addresses to absolute values */ + for (idx = tab->start; idx < tab->stop; idx++) + idx->addr = prel31_to_addr(&idx->addr); + + spin_lock_irqsave(&unwind_lock, flags); + list_add_tail(&tab->list, &unwind_tables); + spin_unlock_irqrestore(&unwind_lock, flags); + + return tab; +} + +void unwind_table_del(struct unwind_table *tab) +{ + unsigned long flags; + + if (!tab) + return; + + spin_lock_irqsave(&unwind_lock, flags); + list_del(&tab->list); + spin_unlock_irqrestore(&unwind_lock, flags); + + kfree(tab); +} + +int __init unwind_init(void) +{ + struct unwind_idx *idx; + + /* Convert the symbol addresses to absolute values */ + for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++) + idx->addr = prel31_to_addr(&idx->addr); + + pr_debug("unwind: ARM stack unwinding initialised\n"); + + return 0; +} diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 00216071eaf..c90f27250ea 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -64,7 +64,9 @@ SECTIONS __initramfs_end = .; #endif . = ALIGN(4096); + __per_cpu_load = .; __per_cpu_start = .; + *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; @@ -80,6 +82,8 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.ARM.exidx.exit.text) + *(.ARM.extab.exit.text) #ifndef CONFIG_MMU *(.fixup) *(__ex_table) @@ -110,6 +114,23 @@ SECTIONS _etext = .; /* End of text and rodata section */ +#ifdef CONFIG_ARM_UNWIND + /* + * Stack unwinding tables + */ + . = ALIGN(8); + .ARM.unwind_idx : { + __start_unwind_idx = .; + *(.ARM.exidx*) + __stop_unwind_idx = .; + } + .ARM.unwind_tab : { + __start_unwind_tab = .; + *(.ARM.extab*) + __stop_unwind_tab = .; + } +#endif + #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h index 8f4115d734c..fe08ca1add6 100644 --- a/arch/arm/mach-aaec2000/include/mach/system.h +++ b/arch/arm/mach-aaec2000/include/mach/system.h @@ -16,7 +16,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { cpu_reset(0); } diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 81439fe6fb3..438efbb1748 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -238,6 +238,10 @@ static void __init ek_board_init(void) at91_add_device_i2c(NULL, 0); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* PCK0 provides MCLK to the WM8731 */ + at91_set_B_periph(AT91_PIN_PC1, 0); + /* SSC (for WM8731) */ + at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); } MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 7b9ce7a336b..b5daf7f5e01 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -47,9 +47,6 @@ extern void at91_irq_resume(void); #define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ struct at91_gpio_bank { - unsigned chipbase; /* bank's first GPIO number */ - void __iomem *regbase; /* base of register bank */ - struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */ unsigned short id; /* peripheral ID */ unsigned long offset; /* offset from system peripheral base */ struct clk *clock; /* associated clock */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 2f7d4977dce..f2236f0e101 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -24,19 +24,59 @@ #include <mach/at91_pio.h> #include <mach/gpio.h> +#include <asm/gpio.h> + #include "generic.h" +struct at91_gpio_chip { + struct gpio_chip chip; + struct at91_gpio_chip *next; /* Bank sharing same clock */ + struct at91_gpio_bank *bank; /* Bank definition */ + void __iomem *regbase; /* Base of register bank */ +}; -static struct at91_gpio_bank *gpio; -static int gpio_banks; +#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) + +static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); +static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); +static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); +static int at91_gpiolib_direction_output(struct gpio_chip *chip, + unsigned offset, int val); +static int at91_gpiolib_direction_input(struct gpio_chip *chip, + unsigned offset); +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); + +#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \ + { \ + .chip = { \ + .label = name, \ + .request = at91_gpiolib_request, \ + .direction_input = at91_gpiolib_direction_input, \ + .direction_output = at91_gpiolib_direction_output, \ + .get = at91_gpiolib_get, \ + .set = at91_gpiolib_set, \ + .dbg_show = at91_gpiolib_dbg_show, \ + .base = base_gpio, \ + .ngpio = nr_gpio, \ + }, \ + } + +static struct at91_gpio_chip gpio_chip[] = { + AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32), + AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32), + AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32), + AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32), + AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32), +}; +static int gpio_banks; static inline void __iomem *pin_to_controller(unsigned pin) { pin -= PIN_BASE; pin /= 32; if (likely(pin < gpio_banks)) - return gpio[pin].regbase; + return gpio_chip[pin].regbase; return NULL; } @@ -197,39 +237,6 @@ int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) } EXPORT_SYMBOL(at91_set_multi_drive); -/*--------------------------------------------------------------------------*/ - -/* new-style GPIO calls; these expect at91_set_GPIO_periph to have been - * called, and maybe at91_set_multi_drive() for putout pins. - */ - -int gpio_direction_input(unsigned pin) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !(__raw_readl(pio + PIO_PSR) & mask)) - return -EINVAL; - __raw_writel(mask, pio + PIO_ODR); - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned pin, int value) -{ - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); - - if (!pio || !(__raw_readl(pio + PIO_PSR) & mask)) - return -EINVAL; - __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); - __raw_writel(mask, pio + PIO_OER); - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -/*--------------------------------------------------------------------------*/ - /* * assuming the pin is muxed as a gpio output, set its value. */ @@ -282,7 +289,7 @@ static int gpio_irq_set_wake(unsigned pin, unsigned state) else wakeups[bank] &= ~mask; - set_irq_wake(gpio[bank].id, state); + set_irq_wake(gpio_chip[bank].bank->id, state); return 0; } @@ -292,14 +299,14 @@ void at91_gpio_suspend(void) int i; for (i = 0; i < gpio_banks; i++) { - void __iomem *pio = gpio[i].regbase; + void __iomem *pio = gpio_chip[i].regbase; backups[i] = __raw_readl(pio + PIO_IMR); __raw_writel(backups[i], pio + PIO_IDR); __raw_writel(wakeups[i], pio + PIO_IER); if (!wakeups[i]) - clk_disable(gpio[i].clock); + clk_disable(gpio_chip[i].bank->clock); else { #ifdef CONFIG_PM_DEBUG printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); @@ -313,10 +320,10 @@ void at91_gpio_resume(void) int i; for (i = 0; i < gpio_banks; i++) { - void __iomem *pio = gpio[i].regbase; + void __iomem *pio = gpio_chip[i].regbase; if (!wakeups[i]) - clk_enable(gpio[i].clock); + clk_enable(gpio_chip[i].bank->clock); __raw_writel(wakeups[i], pio + PIO_IDR); __raw_writel(backups[i], pio + PIO_IER); @@ -380,12 +387,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { unsigned pin; struct irq_desc *gpio; - struct at91_gpio_bank *bank; + struct at91_gpio_chip *at91_gpio; void __iomem *pio; u32 isr; - bank = get_irq_chip_data(irq); - pio = bank->regbase; + at91_gpio = get_irq_chip_data(irq); + pio = at91_gpio->regbase; /* temporarily mask (level sensitive) parent IRQ */ desc->chip->ack(irq); @@ -396,14 +403,14 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) */ isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); if (!isr) { - if (!bank->next) + if (!at91_gpio->next) break; - bank = bank->next; - pio = bank->regbase; + at91_gpio = at91_gpio->next; + pio = at91_gpio->regbase; continue; } - pin = bank->chipbase; + pin = at91_gpio->chip.base; gpio = &irq_desc[pin]; while (isr) { @@ -502,17 +509,17 @@ static struct lock_class_key gpio_lock_class; void __init at91_gpio_irq_setup(void) { unsigned pioc, pin; - struct at91_gpio_bank *this, *prev; + struct at91_gpio_chip *this, *prev; - for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL; + for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL; pioc++ < gpio_banks; prev = this, this++) { - unsigned id = this->id; + unsigned id = this->bank->id; unsigned i; __raw_writel(~0, this->regbase + PIO_IDR); - for (i = 0, pin = this->chipbase; i < 32; i++, pin++) { + for (i = 0, pin = this->chip.base; i < 32; i++, pin++) { lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class); /* @@ -537,32 +544,117 @@ void __init at91_gpio_irq_setup(void) pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); } +/* gpiolib support */ +static int at91_gpiolib_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + PIO_ODR); + return 0; +} + +static int at91_gpiolib_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + return 0; +} + +static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + u32 pdsr; + + pdsr = __raw_readl(pio + PIO_PDSR); + return (pdsr & mask) != 0; +} + +static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR)); +} + +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) +{ + unsigned pin = chip->base + offset; + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + /* Cannot request GPIOs that are in alternate function mode */ + if (!(__raw_readl(pio + PIO_PSR) & mask)) + return -EPERM; + + return 0; +} + +static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + int i; + + for (i = 0; i < chip->ngpio; i++) { + unsigned pin = chip->base + i; + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + const char *gpio_label; + + gpio_label = gpiochip_is_requested(chip, i); + if (gpio_label) { + seq_printf(s, "[%s] GPIO%s%d: ", + gpio_label, chip->label, i); + if (__raw_readl(pio + PIO_PSR) & mask) + seq_printf(s, "[gpio] %s\n", + at91_get_gpio_value(pin) ? + "set" : "clear"); + else + seq_printf(s, "[periph %s]\n", + __raw_readl(pio + PIO_ABSR) & + mask ? "B" : "A"); + } + } +} + /* * Called from the processor-specific init to enable GPIO pin support. */ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) { unsigned i; - struct at91_gpio_bank *last; + struct at91_gpio_chip *at91_gpio, *last = NULL; BUG_ON(nr_banks > MAX_GPIO_BANKS); - gpio = data; gpio_banks = nr_banks; - for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) { - data->chipbase = PIN_BASE + i * 32; - data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS; + for (i = 0; i < nr_banks; i++) { + at91_gpio = &gpio_chip[i]; + + at91_gpio->bank = &data[i]; + at91_gpio->chip.base = PIN_BASE + i * 32; + at91_gpio->regbase = at91_gpio->bank->offset + + (void __iomem *)AT91_VA_BASE_SYS; /* enable PIO controller's clock */ - clk_enable(data->clock); + clk_enable(at91_gpio->bank->clock); - /* - * Some processors share peripheral ID between multiple GPIO banks. - * SAM9263 (PIOC, PIOD, PIOE) - * CAP9 (PIOA, PIOB, PIOC, PIOD) - */ - if (last && last->id == data->id) - last->next = data; + /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ + if (last && last->bank->id == at91_gpio->bank->id) + last->next = at91_gpio; + last = at91_gpio; + + gpiochip_add(&at91_gpio->chip); } } diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index bffa6741a75..04c91e31c9c 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -213,32 +213,12 @@ extern void at91_gpio_resume(void); */ #include <asm/errno.h> - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - might_sleep(); -} - -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - -static inline int gpio_get_value(unsigned gpio) -{ - return at91_get_gpio_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - at91_set_gpio_value(gpio, value); -} - #include <asm-generic/gpio.h> /* cansleep wrappers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + static inline int gpio_to_irq(unsigned gpio) { return gpio; diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h index e712658d966..5268af3933c 100644 --- a/arch/arm/mach-at91/include/mach/system.h +++ b/arch/arm/mach-at91/include/mach/system.h @@ -43,7 +43,7 @@ static inline void arch_idle(void) void (*at91_arch_reset)(void); -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* call the CPU-specific reset function */ if (at91_arch_reset) diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h index 24e96159e3e..f916cd7a477 100644 --- a/arch/arm/mach-clps711x/include/mach/system.h +++ b/arch/arm/mach-clps711x/include/mach/system.h @@ -32,7 +32,7 @@ static inline void arch_idle(void) mov r0, r0"); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { cpu_reset(0); } diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h index 17ca41dc2c5..b7e7036674f 100644 --- a/arch/arm/mach-davinci/include/mach/system.h +++ b/arch/arm/mach-davinci/include/mach/system.h @@ -21,7 +21,7 @@ static void arch_idle(void) cpu_do_idle(); } -static void arch_reset(char mode) +static void arch_reset(char mode, const char *cmd) { davinci_watchdog_reset(); } diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h index 350a028997e..9a26245bf1f 100644 --- a/arch/arm/mach-ebsa110/include/mach/system.h +++ b/arch/arm/mach-ebsa110/include/mach/system.h @@ -34,6 +34,6 @@ static inline void arch_idle(void) asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); } -#define arch_reset(mode) cpu_reset(0x80000000) +#define arch_reset(mode, cmd) cpu_reset(0x80000000) #endif diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 944e42d5164..9522e205b73 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o gpio.o +obj-y := core.o clock.o dma-m2p.o gpio.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 96049283a10..e8ebeaea6c4 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -41,6 +41,56 @@ static struct clk clk_usb_host = { .enable_mask = EP93XX_SYSCON_CLOCK_USH_EN, }; +/* DMA Clocks */ +static struct clk clk_m2p0 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00020000, +}; +static struct clk clk_m2p1 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00010000, +}; +static struct clk clk_m2p2 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00080000, +}; +static struct clk clk_m2p3 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00040000, +}; +static struct clk clk_m2p4 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00200000, +}; +static struct clk clk_m2p5 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00100000, +}; +static struct clk clk_m2p6 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00800000, +}; +static struct clk clk_m2p7 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x00400000, +}; +static struct clk clk_m2p8 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x02000000, +}; +static struct clk clk_m2p9 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x01000000, +}; +static struct clk clk_m2m0 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x04000000, +}; +static struct clk clk_m2m1 = { + .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL, + .enable_mask = 0x08000000, +}; + #define INIT_CK(dev,con,ck) \ { .dev_id = dev, .con_id = con, .clk = ck } @@ -54,6 +104,18 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), INIT_CK(NULL, "usb_host", &clk_usb_host), + INIT_CK(NULL, "m2p0", &clk_m2p0), + INIT_CK(NULL, "m2p1", &clk_m2p1), + INIT_CK(NULL, "m2p2", &clk_m2p2), + INIT_CK(NULL, "m2p3", &clk_m2p3), + INIT_CK(NULL, "m2p4", &clk_m2p4), + INIT_CK(NULL, "m2p5", &clk_m2p5), + INIT_CK(NULL, "m2p6", &clk_m2p6), + INIT_CK(NULL, "m2p7", &clk_m2p7), + INIT_CK(NULL, "m2p8", &clk_m2p8), + INIT_CK(NULL, "m2p9", &clk_m2p9), + INIT_CK(NULL, "m2m0", &clk_m2m0), + INIT_CK(NULL, "m2m1", &clk_m2m1), }; @@ -110,6 +172,22 @@ static unsigned long calc_pll_rate(u32 config_word) return (unsigned long)rate; } +static void __init ep93xx_dma_clock_init(void) +{ + clk_m2p0.rate = clk_h.rate; + clk_m2p1.rate = clk_h.rate; + clk_m2p2.rate = clk_h.rate; + clk_m2p3.rate = clk_h.rate; + clk_m2p4.rate = clk_h.rate; + clk_m2p5.rate = clk_h.rate; + clk_m2p6.rate = clk_h.rate; + clk_m2p7.rate = clk_h.rate; + clk_m2p8.rate = clk_h.rate; + clk_m2p9.rate = clk_h.rate; + clk_m2m0.rate = clk_h.rate; + clk_m2m1.rate = clk_h.rate; +} + static int __init ep93xx_clock_init(void) { u32 value; @@ -124,6 +202,7 @@ static int __init ep93xx_clock_init(void) clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7]; clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7]; clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3]; + ep93xx_dma_clock_init(); value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c new file mode 100644 index 00000000000..a2df5bb7dff --- /dev/null +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -0,0 +1,408 @@ +/* + * arch/arm/mach-ep93xx/dma-m2p.c + * M2P DMA handling for Cirrus EP93xx chips. + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2006 Applied Data Systems + * + * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +/* + * On the EP93xx chip the following peripherals my be allocated to the 10 + * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). + * + * I2S contains 3 Tx and 3 Rx DMA Channels + * AAC contains 3 Tx and 3 Rx DMA Channels + * UART1 contains 1 Tx and 1 Rx DMA Channels + * UART2 contains 1 Tx and 1 Rx DMA Channels + * UART3 contains 1 Tx and 1 Rx DMA Channels + * IrDA contains 1 Tx and 1 Rx DMA Channels + * + * SSP and IDE use the Memory to Memory (M2M) channels and are not covered + * with this implementation. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/module.h> + +#include <mach/dma.h> +#include <mach/hardware.h> + +#define M2P_CONTROL 0x00 +#define M2P_CONTROL_STALL_IRQ_EN (1 << 0) +#define M2P_CONTROL_NFB_IRQ_EN (1 << 1) +#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3) +#define M2P_CONTROL_ENABLE (1 << 4) +#define M2P_INTERRUPT 0x04 +#define M2P_INTERRUPT_STALL (1 << 0) +#define M2P_INTERRUPT_NFB (1 << 1) +#define M2P_INTERRUPT_ERROR (1 << 3) +#define M2P_PPALLOC 0x08 +#define M2P_STATUS 0x0c +#define M2P_REMAIN 0x14 +#define M2P_MAXCNT0 0x20 +#define M2P_BASE0 0x24 +#define M2P_MAXCNT1 0x30 +#define M2P_BASE1 0x34 + +#define STATE_IDLE 0 /* Channel is inactive. */ +#define STATE_STALL 1 /* Channel is active, no buffers pending. */ +#define STATE_ON 2 /* Channel is active, one buffer pending. */ +#define STATE_NEXT 3 /* Channel is active, two buffers pending. */ + +struct m2p_channel { + char *name; + void __iomem *base; + int irq; + + struct clk *clk; + spinlock_t lock; + + void *client; + unsigned next_slot:1; + struct ep93xx_dma_buffer *buffer_xfer; + struct ep93xx_dma_buffer *buffer_next; + struct list_head buffers_pending; +}; + +static struct m2p_channel m2p_rx[] = { + {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1}, + {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3}, + {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5}, + {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7}, + {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9}, + {NULL}, +}; + +static struct m2p_channel m2p_tx[] = { + {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0}, + {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2}, + {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4}, + {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6}, + {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8}, + {NULL}, +}; + +static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf) +{ + if (ch->next_slot == 0) { + writel(buf->size, ch->base + M2P_MAXCNT0); + writel(buf->bus_addr, ch->base + M2P_BASE0); + } else { + writel(buf->size, ch->base + M2P_MAXCNT1); + writel(buf->bus_addr, ch->base + M2P_BASE1); + } + ch->next_slot ^= 1; +} + +static void choose_buffer_xfer(struct m2p_channel *ch) +{ + struct ep93xx_dma_buffer *buf; + + ch->buffer_xfer = NULL; + if (!list_empty(&ch->buffers_pending)) { + buf = list_entry(ch->buffers_pending.next, + struct ep93xx_dma_buffer, list); + list_del(&buf->list); + feed_buf(ch, buf); + ch->buffer_xfer = buf; + } +} + +static void choose_buffer_next(struct m2p_channel *ch) +{ + struct ep93xx_dma_buffer *buf; + + ch->buffer_next = NULL; + if (!list_empty(&ch->buffers_pending)) { + buf = list_entry(ch->buffers_pending.next, + struct ep93xx_dma_buffer, list); + list_del(&buf->list); + feed_buf(ch, buf); + ch->buffer_next = buf; + } +} + +static inline void m2p_set_control(struct m2p_channel *ch, u32 v) +{ + /* + * The control register must be read immediately after being written so + * that the internal state machine is correctly updated. See the ep93xx + * users' guide for details. + */ + writel(v, ch->base + M2P_CONTROL); + readl(ch->base + M2P_CONTROL); +} + +static inline int m2p_channel_state(struct m2p_channel *ch) +{ + return (readl(ch->base + M2P_STATUS) >> 4) & 0x3; +} + +static irqreturn_t m2p_irq(int irq, void *dev_id) +{ + struct m2p_channel *ch = dev_id; + struct ep93xx_dma_m2p_client *cl; + u32 irq_status, v; + int error = 0; + + cl = ch->client; + + spin_lock(&ch->lock); + irq_status = readl(ch->base + M2P_INTERRUPT); + + if (irq_status & M2P_INTERRUPT_ERROR) { + writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT); + error = 1; + } + + if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) { + spin_unlock(&ch->lock); + return IRQ_NONE; + } + + switch (m2p_channel_state(ch)) { + case STATE_IDLE: + pr_crit("m2p_irq: dma interrupt without a dma buffer\n"); + BUG(); + break; + + case STATE_STALL: + cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); + if (ch->buffer_next != NULL) { + cl->buffer_finished(cl->cookie, ch->buffer_next, + 0, error); + } + choose_buffer_xfer(ch); + choose_buffer_next(ch); + if (ch->buffer_xfer != NULL) + cl->buffer_started(cl->cookie, ch->buffer_xfer); + break; + + case STATE_ON: + cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); + ch->buffer_xfer = ch->buffer_next; + choose_buffer_next(ch); + cl->buffer_started(cl->cookie, ch->buffer_xfer); + break; + + case STATE_NEXT: + pr_crit("m2p_irq: dma interrupt while next\n"); + BUG(); + break; + } + + v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN | + M2P_CONTROL_NFB_IRQ_EN); + if (ch->buffer_xfer != NULL) + v |= M2P_CONTROL_STALL_IRQ_EN; + if (ch->buffer_next != NULL) + v |= M2P_CONTROL_NFB_IRQ_EN; + m2p_set_control(ch, v); + + spin_unlock(&ch->lock); + return IRQ_HANDLED; +} + +static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl) +{ + struct m2p_channel *ch; + int i; + + if (cl->flags & EP93XX_DMA_M2P_RX) + ch = m2p_rx; + else + ch = m2p_tx; + + for (i = 0; ch[i].base; i++) { + struct ep93xx_dma_m2p_client *client; + + client = ch[i].client; + if (client != NULL) { + int port; + + port = cl->flags & EP93XX_DMA_M2P_PORT_MASK; + if (port == (client->flags & + EP93XX_DMA_M2P_PORT_MASK)) { + pr_warning("DMA channel already used by %s\n", + cl->name ? : "unknown client"); + return ERR_PTR(-EBUSY); + } + } + } + + for (i = 0; ch[i].base; i++) { + if (ch[i].client == NULL) + return ch + i; + } + + pr_warning("No free DMA channel for %s\n", + cl->name ? : "unknown client"); + return ERR_PTR(-ENODEV); +} + +static void channel_enable(struct m2p_channel *ch) +{ + struct ep93xx_dma_m2p_client *cl = ch->client; + u32 v; + + clk_enable(ch->clk); + + v = cl->flags & EP93XX_DMA_M2P_PORT_MASK; + writel(v, ch->base + M2P_PPALLOC); + + v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK; + v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN; + m2p_set_control(ch, v); +} + +static void channel_disable(struct m2p_channel *ch) +{ + u32 v; + + v = readl(ch->base + M2P_CONTROL); + v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); + m2p_set_control(ch, v); + + while (m2p_channel_state(ch) == STATE_ON) + cpu_relax(); + + m2p_set_control(ch, 0x0); + + while (m2p_channel_state(ch) == STATE_STALL) + cpu_relax(); + + clk_disable(ch->clk); +} + +int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl) +{ + struct m2p_channel *ch; + int err; + + ch = find_free_channel(cl); + if (IS_ERR(ch)) + return PTR_ERR(ch); + + err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch); + if (err) + return err; + + ch->client = cl; + ch->next_slot = 0; + ch->buffer_xfer = NULL; + ch->buffer_next = NULL; + INIT_LIST_HEAD(&ch->buffers_pending); + + cl->channel = ch; + + channel_enable(ch); + + return 0; +} +EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register); + +void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl) +{ + struct m2p_channel *ch = cl->channel; + + channel_disable(ch); + free_irq(ch->irq, ch); + ch->client = NULL; +} +EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister); + +void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl, + struct ep93xx_dma_buffer *buf) +{ + struct m2p_channel *ch = cl->channel; + unsigned long flags; + u32 v; + + spin_lock_irqsave(&ch->lock, flags); + v = readl(ch->base + M2P_CONTROL); + if (ch->buffer_xfer == NULL) { + ch->buffer_xfer = buf; + feed_buf(ch, buf); + cl->buffer_started(cl->cookie, buf); + + v |= M2P_CONTROL_STALL_IRQ_EN; + m2p_set_control(ch, v); + + } else if (ch->buffer_next == NULL) { + ch->buffer_next = buf; + feed_buf(ch, buf); + + v |= M2P_CONTROL_NFB_IRQ_EN; + m2p_set_control(ch, v); + } else { + list_add_tail(&buf->list, &ch->buffers_pending); + } + spin_unlock_irqrestore(&ch->lock, flags); +} +EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit); + +void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl, + struct ep93xx_dma_buffer *buf) +{ + struct m2p_channel *ch = cl->channel; + + list_add_tail(&buf->list, &ch->buffers_pending); +} +EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive); + +void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl) +{ + struct m2p_channel *ch = cl->channel; + + channel_disable(ch); + ch->next_slot = 0; + ch->buffer_xfer = NULL; + ch->buffer_next = NULL; + INIT_LIST_HEAD(&ch->buffers_pending); + channel_enable(ch); +} +EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush); + +static int init_channel(struct m2p_channel *ch) +{ + ch->clk = clk_get(NULL, ch->name); + if (IS_ERR(ch->clk)) + return PTR_ERR(ch->clk); + + spin_lock_init(&ch->lock); + ch->client = NULL; + + return 0; +} + +static int __init ep93xx_dma_m2p_init(void) +{ + int i; + int ret; + + for (i = 0; m2p_rx[i].base; i++) { + ret = init_channel(m2p_rx + i); + if (ret) + return ret; + } + + for (i = 0; m2p_tx[i].base; i++) { + ret = init_channel(m2p_tx + i); + if (ret) + return ret; + } + + pr_info("M2P DMA subsystem initialized\n"); + return 0; +} +arch_initcall(ep93xx_dma_m2p_init); diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c index 5b5c22b681b..6171167d331 100644 --- a/arch/arm/mach-ep93xx/edb9307a.c +++ b/arch/arm/mach-ep93xx/edb9307a.c @@ -48,12 +48,24 @@ static struct ep93xx_eth_data edb9307a_eth_data = { .phy_id = 1, }; +static struct i2c_board_info __initdata edb9307a_i2c_data[] = { + { + /* On-board battery backed RTC */ + I2C_BOARD_INFO("isl1208", 0x6f), + }, + /* + * The I2C signals are also routed to the Expansion Connector (J4) + */ +}; + static void __init edb9307a_init_machine(void) { ep93xx_init_devices(); platform_device_register(&edb9307a_flash); ep93xx_register_eth(&edb9307a_eth_data, 1); + + ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data)); } MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h new file mode 100644 index 00000000000..ef6bd9d1314 --- /dev/null +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -0,0 +1,52 @@ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#include <linux/list.h> +#include <linux/types.h> + +struct ep93xx_dma_buffer { + struct list_head list; + u32 bus_addr; + u16 size; +}; + +struct ep93xx_dma_m2p_client { + char *name; + u8 flags; + void *cookie; + void (*buffer_started)(void *cookie, + struct ep93xx_dma_buffer *buf); + void (*buffer_finished)(void *cookie, + struct ep93xx_dma_buffer *buf, + int bytes, int error); + + /* Internal to the DMA code. */ + void *channel; +}; + +#define EP93XX_DMA_M2P_PORT_I2S1 0x00 +#define EP93XX_DMA_M2P_PORT_I2S2 0x01 +#define EP93XX_DMA_M2P_PORT_AAC1 0x02 +#define EP93XX_DMA_M2P_PORT_AAC2 0x03 +#define EP93XX_DMA_M2P_PORT_AAC3 0x04 +#define EP93XX_DMA_M2P_PORT_I2S3 0x05 +#define EP93XX_DMA_M2P_PORT_UART1 0x06 +#define EP93XX_DMA_M2P_PORT_UART2 0x07 +#define EP93XX_DMA_M2P_PORT_UART3 0x08 +#define EP93XX_DMA_M2P_PORT_IRDA 0x09 +#define EP93XX_DMA_M2P_PORT_MASK 0x0f +#define EP93XX_DMA_M2P_TX 0x00 +#define EP93XX_DMA_M2P_RX 0x10 +#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 +#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 +#define EP93XX_DMA_M2P_ERROR_MASK 0x60 + +int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); +void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, + struct ep93xx_dma_buffer *buf); +void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, + struct ep93xx_dma_buffer *buf); +void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 22d6c9a6e4c..f66be12b856 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -58,7 +58,8 @@ /* AHB peripherals */ -#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000) +#define EP93XX_DMA_BASE ((void __iomem *) \ + (EP93XX_AHB_VIRT_BASE + 0x00000000)) #define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000) #define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h index 67789d0f329..ed8f35e4f06 100644 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ b/arch/arm/mach-ep93xx/include/mach/system.h @@ -9,7 +9,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { u32 devicecfg; diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index 4f350634696..e2e0df8bcee 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -21,16 +21,16 @@ #include <asm/hardware/dec21285.h> #if 0 -static int fb_dma_request(dmach_t channel, dma_t *dma) +static int fb_dma_request(unsigned int chan, dma_t *dma) { return -EINVAL; } -static void fb_dma_enable(dmach_t channel, dma_t *dma) +static void fb_dma_enable(unsigned int chan, dma_t *dma) { } -static void fb_dma_disable(dmach_t channel, dma_t *dma) +static void fb_dma_disable(unsigned int chan, dma_t *dma) { } @@ -42,7 +42,7 @@ static struct dma_ops fb_dma_ops = { }; #endif -void __init arch_dma_init(dma_t *dma) +static int __init fb_dma_init(void) { #if 0 dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops; @@ -50,6 +50,8 @@ void __init arch_dma_init(dma_t *dma) #endif #ifdef CONFIG_ISA_DMA if (footbridge_cfn_mode()) - isa_init_dma(dma + _ISA_DMA(0)); + isa_init_dma(); #endif + return 0; } +core_initcall(fb_dma_init); diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h index 2db7f36bd6c..0b293156620 100644 --- a/arch/arm/mach-footbridge/include/mach/system.h +++ b/arch/arm/mach-footbridge/include/mach/system.h @@ -18,7 +18,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { if (mode == 's') { /* diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig new file mode 100644 index 00000000000..515b75cf2e8 --- /dev/null +++ b/arch/arm/mach-gemini/Kconfig @@ -0,0 +1,19 @@ +if ARCH_GEMINI + +menu "Cortina Systems Gemini Implementations" + +config MACH_RUT100 + bool "Teltonika RUT100" + select GEMINI_MEM_SWAP + help + Say Y here if you intend to run this kernel on a + Teltonika 3G Router RUT100. + +endmenu + +config GEMINI_MEM_SWAP + bool "Gemini memory is swapped" + help + Say Y here if Gemini memory is swapped by bootloader. + +endif diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile new file mode 100644 index 00000000000..719505b8182 --- /dev/null +++ b/arch/arm/mach-gemini/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := irq.o mm.o time.o devices.o gpio.o + +# Board-specific support +obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o diff --git a/arch/arm/mach-gemini/Makefile.boot b/arch/arm/mach-gemini/Makefile.boot new file mode 100644 index 00000000000..22a52c228d9 --- /dev/null +++ b/arch/arm/mach-gemini/Makefile.boot @@ -0,0 +1,9 @@ +ifeq ($(CONFIG_GEMINI_MEM_SWAP),y) + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 +else + zreladdr-y := 0x10008000 +params_phys-y := 0x10000100 +initrd_phys-y := 0x10800000 +endif diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c new file mode 100644 index 00000000000..e0de968e32a --- /dev/null +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -0,0 +1,95 @@ +/* + * Support for Teltonika RUT1xx + * + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "common.h" + +static struct gpio_keys_button rut1xx_keys[] = { + { + .code = KEY_SETUP, + .gpio = 60, + .active_low = 1, + .desc = "Reset to defaults", + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data rut1xx_keys_data = { + .buttons = rut1xx_keys, + .nbuttons = ARRAY_SIZE(rut1xx_keys), +}; + +static struct platform_device rut1xx_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &rut1xx_keys_data, + }, +}; + +static struct gpio_led rut100_leds[] = { + { + .name = "Power", + .default_trigger = "heartbeat", + .gpio = 17, + }, + { + .name = "GSM", + .default_trigger = "default-on", + .gpio = 7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data rut100_leds_data = { + .num_leds = ARRAY_SIZE(rut100_leds), + .leds = rut100_leds, +}; + +static struct platform_device rut1xx_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &rut100_leds_data, + }, +}; + +static struct sys_timer rut1xx_timer = { + .init = gemini_timer_init, +}; + +static void __init rut1xx_init(void) +{ + gemini_gpio_init(); + platform_register_uart(); + platform_register_pflash(SZ_8M, NULL, 0); + platform_device_register(&rut1xx_leds); + platform_device_register(&rut1xx_keys_device); +} + +MACHINE_START(RUT100, "Teltonika RUT100") + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = gemini_map_io, + .init_irq = gemini_init_irq, + .timer = &rut1xx_timer, + .init_machine = rut1xx_init, +MACHINE_END diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h new file mode 100644 index 00000000000..9392834a214 --- /dev/null +++ b/arch/arm/mach-gemini/common.h @@ -0,0 +1,28 @@ +/* + * Common Gemini architecture functions + * + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __GEMINI_COMMON_H__ +#define __GEMINI_COMMON_H__ + +struct mtd_partition; + +extern void gemini_map_io(void); +extern void gemini_init_irq(void); +extern void gemini_timer_init(void); +extern void gemini_gpio_init(void); + +/* Common platform devices registration functions */ +extern int platform_register_uart(void); +extern int platform_register_pflash(unsigned int size, + struct mtd_partition *parts, + unsigned int nr_parts); + +#endif /* __GEMINI_COMMON_H__ */ diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c new file mode 100644 index 00000000000..6b525253d02 --- /dev/null +++ b/arch/arm/mach-gemini/devices.c @@ -0,0 +1,92 @@ +/* + * Common devices definition for Gemini + * + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/mtd/physmap.h> + +#include <mach/irqs.h> +#include <mach/hardware.h> +#include <mach/global_reg.h> + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (void *)IO_ADDRESS(GEMINI_UART_BASE), + .mapbase = GEMINI_UART_BASE, + .irq = IRQ_UART, + .uartclk = UART_CLK, + .regshift = 2, + .iotype = UPIO_MEM, + .type = PORT_16550A, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE, + }, + {}, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +int platform_register_uart(void) +{ + return platform_device_register(&serial_device); +} + +static struct resource flash_resource = { + .start = GEMINI_FLASH_BASE, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data pflash_platform_data = {}; + +static struct platform_device pflash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pflash_platform_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +int platform_register_pflash(unsigned int size, struct mtd_partition *parts, + unsigned int nr_parts) +{ + unsigned int reg; + + reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS); + + if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL) + return -ENXIO; + + if (reg & FLASH_WIDTH_16BIT) + pflash_platform_data.width = 2; + else + pflash_platform_data.width = 1; + + /* enable parallel flash pins and disable others */ + reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL); + reg &= ~PFLASH_PADS_DISABLE; + reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE; + __raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL); + + flash_resource.end = flash_resource.start + size - 1; + + pflash_platform_data.parts = parts; + pflash_platform_data.nr_parts = nr_parts; + + return platform_device_register(&pflash_device); +} diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c new file mode 100644 index 00000000000..e7263854bc7 --- /dev/null +++ b/arch/arm/mach-gemini/gpio.c @@ -0,0 +1,232 @@ +/* + * Gemini gpiochip and interrupt routines + * + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * Based on plat-mxc/gpio.c: + * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> + +#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x)) + +/* GPIO registers definition */ +#define GPIO_DATA_OUT 0x0 +#define GPIO_DATA_IN 0x4 +#define GPIO_DIR 0x8 +#define GPIO_DATA_SET 0x10 +#define GPIO_DATA_CLR 0x14 +#define GPIO_PULL_EN 0x18 +#define GPIO_PULL_TYPE 0x1C +#define GPIO_INT_EN 0x20 +#define GPIO_INT_STAT 0x24 +#define GPIO_INT_MASK 0x2C +#define GPIO_INT_CLR 0x30 +#define GPIO_INT_TYPE 0x34 +#define GPIO_INT_BOTH_EDGE 0x38 +#define GPIO_INT_LEVEL 0x3C +#define GPIO_DEBOUNCE_EN 0x40 +#define GPIO_DEBOUNCE_PRESCALE 0x44 + +#define GPIO_PORT_NUM 3 + +static void _set_gpio_irqenable(unsigned int base, unsigned int index, + int enable) +{ + unsigned int reg; + + reg = __raw_readl(base + GPIO_INT_EN); + reg = (reg & (~(1 << index))) | (!!enable << index); + __raw_writel(reg, base + GPIO_INT_EN); +} + +static void gpio_ack_irq(unsigned int irq) +{ + unsigned int gpio = irq_to_gpio(irq); + unsigned int base = GPIO_BASE(gpio / 32); + + __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR); +} + +static void gpio_mask_irq(unsigned int irq) +{ + unsigned int gpio = irq_to_gpio(irq); + unsigned int base = GPIO_BASE(gpio / 32); + + _set_gpio_irqenable(base, gpio % 32, 0); +} + +static void gpio_unmask_irq(unsigned int irq) +{ + unsigned int gpio = irq_to_gpio(irq); + unsigned int base = GPIO_BASE(gpio / 32); + + _set_gpio_irqenable(base, gpio % 32, 1); +} + +static int gpio_set_irq_type(unsigned int irq, unsigned int type) +{ + unsigned int gpio = irq_to_gpio(irq); + unsigned int gpio_mask = 1 << (gpio % 32); + unsigned int base = GPIO_BASE(gpio / 32); + unsigned int reg_both, reg_level, reg_type; + + reg_type = __raw_readl(base + GPIO_INT_TYPE); + reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE); + reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE); + + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + reg_type &= ~gpio_mask; + reg_both |= gpio_mask; + break; + case IRQ_TYPE_EDGE_RISING: + reg_type &= ~gpio_mask; + reg_both &= ~gpio_mask; + reg_level &= ~gpio_mask; + break; + case IRQ_TYPE_EDGE_FALLING: + reg_type &= ~gpio_mask; + reg_both &= ~gpio_mask; + reg_level |= gpio_mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + reg_type |= gpio_mask; + reg_level &= ~gpio_mask; + break; + case IRQ_TYPE_LEVEL_LOW: + reg_type |= gpio_mask; + reg_level |= gpio_mask; + break; + default: + return -EINVAL; + } + + __raw_writel(reg_type, base + GPIO_INT_TYPE); + __raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE); + __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); + + gpio_ack_irq(irq); + + return 0; +} + +static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned int gpio_irq_no, irq_stat; + unsigned int port = (unsigned int)get_irq_data(irq); + + irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT); + + gpio_irq_no = GPIO_IRQ_BASE + port * 32; + for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { + + if ((irq_stat & 1) == 0) + continue; + + BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, + &irq_desc[gpio_irq_no]); + } +} + +static struct irq_chip gpio_irq_chip = { + .name = "GPIO", + .ack = gpio_ack_irq, + .mask = gpio_mask_irq, + .unmask = gpio_unmask_irq, + .set_type = gpio_set_irq_type, +}; + +static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, + int dir) +{ + unsigned int base = GPIO_BASE(offset / 32); + unsigned int reg; + + reg = __raw_readl(base + GPIO_DIR); + if (dir) + reg |= 1 << (offset % 32); + else + reg &= ~(1 << (offset % 32)); + __raw_writel(reg, base + GPIO_DIR); +} + +static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + unsigned int base = GPIO_BASE(offset / 32); + + if (value) + __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET); + else + __raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR); +} + +static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int base = GPIO_BASE(offset / 32); + + return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1; +} + +static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + _set_gpio_direction(chip, offset, 0); + return 0; +} + +static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + _set_gpio_direction(chip, offset, 1); + gemini_gpio_set(chip, offset, value); + return 0; +} + +static struct gpio_chip gemini_gpio_chip = { + .label = "Gemini", + .direction_input = gemini_gpio_direction_input, + .get = gemini_gpio_get, + .direction_output = gemini_gpio_direction_output, + .set = gemini_gpio_set, + .base = 0, + .ngpio = GPIO_PORT_NUM * 32, +}; + +void __init gemini_gpio_init(void) +{ + int i, j; + + for (i = 0; i < GPIO_PORT_NUM; i++) { + /* disable, unmask and clear all interrupts */ + __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN); + __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK); + __raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR); + + for (j = GPIO_IRQ_BASE + i * 32; + j < GPIO_IRQ_BASE + (i + 1) * 32; j++) { + set_irq_chip(j, &gpio_irq_chip); + set_irq_handler(j, handle_edge_irq); + set_irq_flags(j, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_GPIO(i), gpio_irq_handler); + set_irq_data(IRQ_GPIO(i), (void *)i); + } + + BUG_ON(gpiochip_add(&gemini_gpio_chip)); +} diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S new file mode 100644 index 00000000000..d04a6eaeae1 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/debug-macro.S @@ -0,0 +1,23 @@ +/* + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <mach/hardware.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =GEMINI_UART_BASE @ physical + ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual + .endm + +#define UART_SHIFT 2 +#define FLOW_CONTROL +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S new file mode 100644 index 00000000000..1624f91a2b8 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/entry-macro.S @@ -0,0 +1,39 @@ +/* + * Low-level IRQ helper macros for Gemini platform. + * + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> + +#define IRQ_STATUS 0x14 + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS) + ldr \irqnr, [\irqstat] + cmp \irqnr, #0 + beq 2313f + mov \tmp, \irqnr + mov \irqnr, #0 +2312: + tst \tmp, #1 + bne 2313f + add \irqnr, \irqnr, #1 + mov \tmp, \tmp, lsr #1 + cmp \irqnr, #31 + bcc 2312b +2313: + .endm diff --git a/arch/arm/mach-gemini/include/mach/global_reg.h b/arch/arm/mach-gemini/include/mach/global_reg.h new file mode 100644 index 00000000000..de7ff7e849f --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/global_reg.h @@ -0,0 +1,278 @@ +/* + * This file contains the hardware definitions for Gemini. + * + * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __MACH_GLOBAL_REG_H +#define __MACH_GLOBAL_REG_H + +/* Global Word ID Register*/ +#define GLOBAL_ID 0x00 + +#define CHIP_ID(reg) ((reg) >> 8) +#define CHIP_REVISION(reg) ((reg) & 0xFF) + +/* Global Status Register */ +#define GLOBAL_STATUS 0x04 + +#define CPU_BIG_ENDIAN (1 << 31) +#define PLL_OSC_30M (1 << 30) /* else 60MHz */ + +#define OPERATION_MODE_MASK (0xF << 26) +#define OPM_IDDQ (0xF << 26) +#define OPM_NAND (0xE << 26) +#define OPM_RING (0xD << 26) +#define OPM_DIRECT_BOOT (0xC << 26) +#define OPM_USB1_PHY_TEST (0xB << 26) +#define OPM_USB0_PHY_TEST (0xA << 26) +#define OPM_SATA1_PHY_TEST (0x9 << 26) +#define OPM_SATA0_PHY_TEST (0x8 << 26) +#define OPM_ICE_ARM (0x7 << 26) +#define OPM_ICE_FARADAY (0x6 << 26) +#define OPM_PLL_BYPASS (0x5 << 26) +#define OPM_DEBUG (0x4 << 26) +#define OPM_BURN_IN (0x3 << 26) +#define OPM_MBIST (0x2 << 26) +#define OPM_SCAN (0x1 << 26) +#define OPM_REAL (0x0 << 26) + +#define FLASH_TYPE_MASK (0x3 << 24) +#define FLASH_TYPE_NAND_2K (0x3 << 24) +#define FLASH_TYPE_NAND_512 (0x2 << 24) +#define FLASH_TYPE_PARALLEL (0x1 << 24) +#define FLASH_TYPE_SERIAL (0x0 << 24) +/* if parallel */ +#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */ +/* if serial */ +#define FLASH_ATMEL (1 << 23) /* else STM */ + +#define FLASH_SIZE_MASK (0x3 << 21) +#define NAND_256M (0x3 << 21) /* and more */ +#define NAND_128M (0x2 << 21) +#define NAND_64M (0x1 << 21) +#define NAND_32M (0x0 << 21) +#define ATMEL_16M (0x3 << 21) /* and more */ +#define ATMEL_8M (0x2 << 21) +#define ATMEL_4M_2M (0x1 << 21) +#define ATMEL_1M (0x0 << 21) /* and less */ +#define STM_32M (1 << 22) /* and more */ +#define STM_16M (0 << 22) /* and less */ + +#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */ + +#define CPU_AHB_RATIO_MASK (0x3 << 18) +#define CPU_AHB_1_1 (0x0 << 18) +#define CPU_AHB_3_2 (0x1 << 18) +#define CPU_AHB_24_13 (0x2 << 18) +#define CPU_AHB_2_1 (0x3 << 18) + +#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130) +#define AHB_SPEED_TO_REG(x) ((((x - 130)) / 10) << 15) + +/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */ +#define OVERRIDE_FLASH_TYPE_SHIFT 16 +#define OVERRIDE_FLASH_WIDTH_SHIFT 16 +#define OVERRIDE_FLASH_SIZE_SHIFT 16 +#define OVERRIDE_CPU_AHB_RATIO_SHIFT 15 +#define OVERRIDE_AHB_SPEED_SHIFT 15 + +/* Global PLL Control Register */ +#define GLOBAL_PLL_CTRL 0x08 + +#define PLL_BYPASS (1 << 31) +#define PLL_POWER_DOWN (1 << 8) +#define PLL_CONTROL_Q (0x1F << 0) + +/* Global Soft Reset Control Register */ +#define GLOBAL_RESET 0x0C + +#define RESET_GLOBAL (1 << 31) +#define RESET_CPU1 (1 << 30) +#define RESET_TVE (1 << 28) +#define RESET_SATA1 (1 << 27) +#define RESET_SATA0 (1 << 26) +#define RESET_CIR (1 << 25) +#define RESET_EXT_DEV (1 << 24) +#define RESET_WD (1 << 23) +#define RESET_GPIO2 (1 << 22) +#define RESET_GPIO1 (1 << 21) +#define RESET_GPIO0 (1 << 20) +#define RESET_SSP (1 << 19) +#define RESET_UART (1 << 18) +#define RESET_TIMER (1 << 17) +#define RESET_RTC (1 << 16) +#define RESET_INT1 (1 << 15) +#define RESET_INT0 (1 << 14) +#define RESET_LCD (1 << 13) +#define RESET_LPC (1 << 12) +#define RESET_APB (1 << 11) +#define RESET_DMA (1 << 10) +#define RESET_USB1 (1 << 9) +#define RESET_USB0 (1 << 8) +#define RESET_PCI (1 << 7) +#define RESET_GMAC1 (1 << 6) +#define RESET_GMAC0 (1 << 5) +#define RESET_SECURITY (1 << 4) +#define RESET_RAID (1 << 3) +#define RESET_IDE (1 << 2) +#define RESET_FLASH (1 << 1) +#define RESET_DRAM (1 << 0) + +/* Global IO Pad Driving Capability Control Register */ +#define GLOBAL_IO_DRIVING_CTRL 0x10 + +#define DRIVING_CURRENT_MASK 0x3 + +/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */ +#define GPIO1_PADS_31_28_SHIFT 28 +#define GPIO0_PADS_31_16_SHIFT 26 +#define GPIO0_PADS_15_0_SHIFT 24 +#define PCI_AND_EXT_RESET_PADS_SHIFT 22 +#define IDE_PADS_SHIFT 20 +#define GMAC1_PADS_SHIFT 18 +#define GMAC0_PADS_SHIFT 16 +/* DRAM is not in mA and poorly documented */ +#define DRAM_CLOCK_PADS_SHIFT 8 +#define DRAM_DATA_PADS_SHIFT 4 +#define DRAM_CONTROL_PADS_SHIFT 0 + +/* Global IO Pad Slew Rate Control Register */ +#define GLOBAL_IO_SLEW_RATE_CTRL 0x14 + +#define GPIO1_PADS_31_28_SLOW (1 << 10) +#define GPIO0_PADS_31_16_SLOW (1 << 9) +#define GPIO0_PADS_15_0_SLOW (1 << 8) +#define PCI_PADS_SLOW (1 << 7) +#define IDE_PADS_SLOW (1 << 6) +#define GMAC1_PADS_SLOW (1 << 5) +#define GMAC0_PADS_SLOW (1 << 4) +#define DRAM_CLOCK_PADS_SLOW (1 << 1) +#define DRAM_IO_PADS_SLOW (1 << 0) + +/* + * General skew control defines + * 16 steps, each step is around 0.2ns + */ +#define SKEW_MASK 0xF + +/* Global IDE PAD Skew Control Register */ +#define GLOBAL_IDE_SKEW_CTRL 0x18 + +#define IDE1_HOST_STROBE_DELAY_SHIFT 28 +#define IDE1_DEVICE_STROBE_DELAY_SHIFT 24 +#define IDE1_OUTPUT_IO_SKEW_SHIFT 20 +#define IDE1_INPUT_IO_SKEW_SHIFT 16 +#define IDE0_HOST_STROBE_DELAY_SHIFT 12 +#define IDE0_DEVICE_STROBE_DELAY_SHIFT 8 +#define IDE0_OUTPUT_IO_SKEW_SHIFT 4 +#define IDE0_INPUT_IO_SKEW_SHIFT 0 + +/* Global GMAC Control Pad Skew Control Register */ +#define GLOBAL_GMAC_CTRL_SKEW_CTRL 0x1C + +#define GMAC1_TXC_SKEW_SHIFT 28 +#define GMAC1_TXEN_SKEW_SHIFT 24 +#define GMAC1_RXC_SKEW_SHIFT 20 +#define GMAC1_RXDV_SKEW_SHIFT 16 +#define GMAC0_TXC_SKEW_SHIFT 12 +#define GMAC0_TXEN_SKEW_SHIFT 8 +#define GMAC0_RXC_SKEW_SHIFT 4 +#define GMAC0_RXDV_SKEW_SHIFT 0 + +/* Global GMAC0 Data PAD Skew Control Register */ +#define GLOBAL_GMAC0_DATA_SKEW_CTRL 0x20 +/* Global GMAC1 Data PAD Skew Control Register */ +#define GLOBAL_GMAC1_DATA_SKEW_CTRL 0x24 + +#define GMAC_TXD_SKEW_SHIFT(x) (((x) * 4) + 16) +#define GMAC_RXD_SKEW_SHIFT(x) ((x) * 4) + +/* CPU has two AHB busses. */ + +/* Global Arbitration0 Control Register */ +#define GLOBAL_ARBITRATION0_CTRL 0x28 + +#define BOOT_CONTROLLER_HIGH_PRIO (1 << 3) +#define DMA_BUS1_HIGH_PRIO (1 << 2) +#define CPU0_HIGH_PRIO (1 << 0) + +/* Global Arbitration1 Control Register */ +#define GLOBAL_ARBITRATION1_CTRL 0x2C + +#define TVE_HIGH_PRIO (1 << 9) +#define PCI_HIGH_PRIO (1 << 8) +#define USB1_HIGH_PRIO (1 << 7) +#define USB0_HIGH_PRIO (1 << 6) +#define GMAC1_HIGH_PRIO (1 << 5) +#define GMAC0_HIGH_PRIO (1 << 4) +#define SECURITY_HIGH_PRIO (1 << 3) +#define RAID_HIGH_PRIO (1 << 2) +#define IDE_HIGH_PRIO (1 << 1) +#define DMA_BUS2_HIGH_PRIO (1 << 0) + +/* Common bits for both arbitration registers */ +#define BURST_LENGTH_SHIFT 16 +#define BURST_LENGTH_MASK (0x3F << 16) + +/* Miscellaneous Control Register */ +#define GLOBAL_MISC_CTRL 0x30 + +#define MEMORY_SPACE_SWAP (1 << 31) +#define USB1_PLUG_MINIB (1 << 30) /* else plug is mini-A */ +#define USB0_PLUG_MINIB (1 << 29) +#define GMAC_GMII (1 << 28) +#define GMAC_1_ENABLE (1 << 27) +/* TODO: define ATA/SATA bits */ +#define USB1_VBUS_ON (1 << 23) +#define USB0_VBUS_ON (1 << 22) +#define APB_CLKOUT_ENABLE (1 << 21) +#define TVC_CLKOUT_ENABLE (1 << 20) +#define EXT_CLKIN_ENABLE (1 << 19) +#define PCI_66MHZ (1 << 18) /* else 33 MHz */ +#define PCI_CLKOUT_ENABLE (1 << 17) +#define LPC_CLKOUT_ENABLE (1 << 16) +#define USB1_WAKEUP_ON (1 << 15) +#define USB0_WAKEUP_ON (1 << 14) +/* TODO: define PCI idle detect bits */ +#define TVC_PADS_ENABLE (1 << 9) +#define SSP_PADS_ENABLE (1 << 8) +#define LCD_PADS_ENABLE (1 << 7) +#define LPC_PADS_ENABLE (1 << 6) +#define PCI_PADS_ENABLE (1 << 5) +#define IDE_PADS_ENABLE (1 << 4) +#define DRAM_PADS_POWER_DOWN (1 << 3) +#define NAND_PADS_DISABLE (1 << 2) +#define PFLASH_PADS_DISABLE (1 << 1) +#define SFLASH_PADS_DISABLE (1 << 0) + +/* Global Clock Control Register */ +#define GLOBAL_CLOCK_CTRL 0x34 + +#define POWER_STATE_G0 (1 << 31) +#define POWER_STATE_S1 (1 << 30) /* else it is S3/S4 state */ +#define SECURITY_APB_AHB (1 << 29) +/* else Security APB clk will be 0.75xAHB */ +/* TODO: TVC clock divider */ +#define PCI_CLKRUN_ENABLE (1 << 16) +#define BOOT_CLK_DISABLE (1 << 13) +#define TVC_CLK_DISABLE (1 << 12) +#define FLASH_CLK_DISABLE (1 << 11) +#define DDR_CLK_DISABLE (1 << 10) +#define PCI_CLK_DISABLE (1 << 9) +#define IDE_CLK_DISABLE (1 << 8) +#define USB1_CLK_DISABLE (1 << 7) +#define USB0_CLK_DISABLE (1 << 6) +#define SATA1_CLK_DISABLE (1 << 5) +#define SATA0_CLK_DISABLE (1 << 4) +#define GMAC1_CLK_DISABLE (1 << 3) +#define GMAC0_CLK_DISABLE (1 << 2) +#define SECURITY_CLK_DISABLE (1 << 1) + +/* TODO: other registers definitions if needed */ + +#endif /* __MACH_GLOBAL_REG_H */ diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h new file mode 100644 index 00000000000..3bc2c70f298 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/gpio.h @@ -0,0 +1,25 @@ +/* + * Gemini gpiolib specific defines + * + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __MACH_GPIO_H__ +#define __MACH_GPIO_H__ + +#include <mach/irqs.h> +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE) +#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE) + +#endif /* __MACH_GPIO_H__ */ diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h new file mode 100644 index 00000000000..de6752674c0 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -0,0 +1,75 @@ +/* + * This file contains the hardware definitions for Gemini. + * + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +/* + * Memory Map definitions + */ +/* FIXME: Does it really swap SRAM like this? */ +#ifdef CONFIG_GEMINI_MEM_SWAP +# define GEMINI_DRAM_BASE 0x00000000 +# define GEMINI_SRAM_BASE 0x20000000 +#else +# define GEMINI_SRAM_BASE 0x00000000 +# define GEMINI_DRAM_BASE 0x10000000 +#endif +#define GEMINI_FLASH_BASE 0x30000000 +#define GEMINI_GLOBAL_BASE 0x40000000 +#define GEMINI_WAQTCHDOG_BASE 0x41000000 +#define GEMINI_UART_BASE 0x42000000 +#define GEMINI_TIMER_BASE 0x43000000 +#define GEMINI_LCD_BASE 0x44000000 +#define GEMINI_RTC_BASE 0x45000000 +#define GEMINI_SATA_BASE 0x46000000 +#define GEMINI_LPC_HOST_BASE 0x47000000 +#define GEMINI_LPC_IO_BASE 0x47800000 +#define GEMINI_INTERRUPT_BASE 0x48000000 +/* TODO: Different interrupt controlers when SMP + * #define GEMINI_INTERRUPT0_BASE 0x48000000 + * #define GEMINI_INTERRUPT1_BASE 0x49000000 + */ +#define GEMINI_SSP_CTRL_BASE 0x4A000000 +#define GEMINI_POWER_CTRL_BASE 0x4B000000 +#define GEMINI_CIR_BASE 0x4C000000 +#define GEMINI_GPIO_BASE(x) (0x4D000000 + (x) * 0x1000000) +#define GEMINI_PCI_IO_BASE 0x50000000 +#define GEMINI_PCI_MEM_BASE 0x58000000 +#define GEMINI_TOE_BASE 0x60000000 +#define GEMINI_GMAC0_BASE 0x6000A000 +#define GEMINI_GMAC1_BASE 0x6000E000 +#define GEMINI_SECURITY_BASE 0x62000000 +#define GEMINI_IDE0_BASE 0x63000000 +#define GEMINI_IDE1_BASE 0x63400000 +#define GEMINI_RAID_BASE 0x64000000 +#define GEMINI_FLASH_CTRL_BASE 0x65000000 +#define GEMINI_DRAM_CTRL_BASE 0x66000000 +#define GEMINI_GENERAL_DMA_BASE 0x67000000 +#define GEMINI_USB0_BASE 0x68000000 +#define GEMINI_USB1_BASE 0x69000000 +#define GEMINI_BIG_ENDIAN_BASE 0x80000000 + +#define GEMINI_TIMER1_BASE GEMINI_TIMER_BASE +#define GEMINI_TIMER2_BASE (GEMINI_TIMER_BASE + 0x10) +#define GEMINI_TIMER3_BASE (GEMINI_TIMER_BASE + 0x20) + +/* + * UART Clock when System clk is 150MHz + */ +#define UART_CLK 48000000 + +/* + * macro to get at IO space when running virtually + */ +#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) + +#endif diff --git a/arch/arm/mach-gemini/include/mach/io.h b/arch/arm/mach-gemini/include/mach/io.h new file mode 100644 index 00000000000..c548056b98b --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/io.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif /* __MACH_IO_H */ diff --git a/arch/arm/mach-gemini/include/mach/irqs.h b/arch/arm/mach-gemini/include/mach/irqs.h new file mode 100644 index 00000000000..06bc47e77e8 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/irqs.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __MACH_IRQS_H__ +#define __MACH_IRQS_H__ + +#define IRQ_SERIRQ1 31 +#define IRQ_SERIRQ0 30 +#define IRQ_PCID 29 +#define IRQ_PCIC 28 +#define IRQ_PCIB 27 +#define IRQ_PWR 26 +#define IRQ_CIR 25 +#define IRQ_GPIO(x) (22 + (x)) +#define IRQ_SSP 21 +#define IRQ_LPC 20 +#define IRQ_LCD 19 +#define IRQ_UART 18 +#define IRQ_RTC 17 +#define IRQ_TIMER3 16 +#define IRQ_TIMER2 15 +#define IRQ_TIMER1 14 +#define IRQ_FLASH 12 +#define IRQ_USB1 11 +#define IRQ_USB0 10 +#define IRQ_DMA 9 +#define IRQ_PCI 8 +#define IRQ_IPSEC 7 +#define IRQ_RAID 6 +#define IRQ_IDE1 5 +#define IRQ_IDE0 4 +#define IRQ_WATCHDOG 3 +#define IRQ_GMAC1 2 +#define IRQ_GMAC0 1 +#define IRQ_IPI 0 + +#define NORMAL_IRQ_NUM 32 + +#define GPIO_IRQ_BASE NORMAL_IRQ_NUM +#define GPIO_IRQ_NUM (3 * 32) + +#define ARCH_TIMER_IRQ IRQ_TIMER2 + +#define NR_IRQS (NORMAL_IRQ_NUM + GPIO_IRQ_NUM) + +#endif /* __MACH_IRQS_H__ */ diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h new file mode 100644 index 00000000000..2d14d5bf1f9 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/memory.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +#ifdef CONFIG_GEMINI_MEM_SWAP +# define PHYS_OFFSET UL(0x00000000) +#else +# define PHYS_OFFSET UL(0x10000000) +#endif + +#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h new file mode 100644 index 00000000000..bbbd72767a0 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/system.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/global_reg.h> + +static inline void arch_idle(void) +{ + /* + * Because of broken hardware we have to enable interrupts or the CPU + * will never wakeup... Acctualy it is not very good to enable + * interrupts here since scheduler can miss a tick, but there is + * no other way around this. Platforms that needs it for power saving + * should call enable_hlt() in init code, since by default it is + * disabled. + */ + local_irq_enable(); + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + __raw_writel(RESET_GLOBAL | RESET_CPU1, + IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET); +} + +#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h new file mode 100644 index 00000000000..dc5690ba975 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/timex.h @@ -0,0 +1,13 @@ +/* + * Gemini timex specifications + * + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* When AHB bus frequency is 150MHz */ +#define CLOCK_TICK_RATE 38000000 diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h new file mode 100644 index 00000000000..59c5df7e716 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/uncompress.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * Based on mach-pxa/include/mach/uncompress.h: + * Copyright: (C) 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __MACH_UNCOMPRESS_H +#define __MACH_UNCOMPRESS_H + +#include <linux/serial_reg.h> +#include <mach/hardware.h> + +static volatile unsigned long *UART = (unsigned long *)GEMINI_UART_BASE; + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + */ +static inline void putc(char c) +{ + while (!(UART[UART_LSR] & UART_LSR_THRE)) + barrier(); + UART[UART_TX] = c; +} + +#define flush() do { } while (0) + +/* + * nothing to do + */ +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h new file mode 100644 index 00000000000..83e536d9436 --- /dev/null +++ b/arch/arm/mach-gemini/include/mach/vmalloc.h @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#define VMALLOC_END 0xF0000000 diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c new file mode 100644 index 00000000000..9e613ca8120 --- /dev/null +++ b/arch/arm/mach-gemini/irq.c @@ -0,0 +1,102 @@ +/* + * Interrupt routines for Gemini + * + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/stddef.h> +#include <linux/list.h> +#include <linux/sched.h> +#include <asm/irq.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> + +#define IRQ_SOURCE(base_addr) (base_addr + 0x00) +#define IRQ_MASK(base_addr) (base_addr + 0x04) +#define IRQ_CLEAR(base_addr) (base_addr + 0x08) +#define IRQ_TMODE(base_addr) (base_addr + 0x0C) +#define IRQ_TLEVEL(base_addr) (base_addr + 0x10) +#define IRQ_STATUS(base_addr) (base_addr + 0x14) +#define FIQ_SOURCE(base_addr) (base_addr + 0x20) +#define FIQ_MASK(base_addr) (base_addr + 0x24) +#define FIQ_CLEAR(base_addr) (base_addr + 0x28) +#define FIQ_TMODE(base_addr) (base_addr + 0x2C) +#define FIQ_LEVEL(base_addr) (base_addr + 0x30) +#define FIQ_STATUS(base_addr) (base_addr + 0x34) + +static void gemini_ack_irq(unsigned int irq) +{ + __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); +} + +static void gemini_mask_irq(unsigned int irq) +{ + unsigned int mask; + + mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); + mask &= ~(1 << irq); + __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); +} + +static void gemini_unmask_irq(unsigned int irq) +{ + unsigned int mask; + + mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); + mask |= (1 << irq); + __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); +} + +static struct irq_chip gemini_irq_chip = { + .name = "INTC", + .ack = gemini_ack_irq, + .mask = gemini_mask_irq, + .unmask = gemini_unmask_irq, +}; + +static struct resource irq_resource = { + .name = "irq_handler", + .start = IO_ADDRESS(GEMINI_INTERRUPT_BASE), + .end = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4, +}; + +void __init gemini_init_irq(void) +{ + unsigned int i, mode = 0, level = 0; + + /* + * Disable arch_idle() by default since it is buggy + * For more info see arch/arm/mach-gemini/include/mach/system.h + */ + disable_hlt(); + + request_resource(&iomem_resource, &irq_resource); + + for (i = 0; i < NR_IRQS; i++) { + set_irq_chip(i, &gemini_irq_chip); + if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) { + set_irq_handler(i, handle_edge_irq); + mode |= 1 << i; + level |= 1 << i; + } else { + set_irq_handler(i, handle_level_irq); + } + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } + + /* Disable all interrupts */ + __raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); + __raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); + + /* Set interrupt mode */ + __raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); + __raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE))); +} diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c new file mode 100644 index 00000000000..51948242ec0 --- /dev/null +++ b/arch/arm/mach-gemini/mm.c @@ -0,0 +1,82 @@ +/* + * Static mappings for Gemini + * + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> + +/* Page table mapping for I/O region */ +static struct map_desc gemini_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(GEMINI_GLOBAL_BASE), + .pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_UART_BASE), + .pfn = __phys_to_pfn(GEMINI_UART_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_TIMER_BASE), + .pfn = __phys_to_pfn(GEMINI_TIMER_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_INTERRUPT_BASE), + .pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_POWER_CTRL_BASE), + .pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(0)), + .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(1)), + .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(2)), + .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE), + .pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE), + .pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE), + .pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE), + .length = SZ_512K, + .type = MT_DEVICE, + }, +}; + +void __init gemini_map_io(void) +{ + iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc)); +} diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c new file mode 100644 index 00000000000..21dc5a89d1c --- /dev/null +++ b/arch/arm/mach-gemini/time.c @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/global_reg.h> +#include <asm/mach/time.h> + +/* + * Register definitions for the timers + */ +#define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00) +#define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04) +#define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08) +#define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C) +#define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30) + +#define TIMER_1_CR_ENABLE (1 << 0) +#define TIMER_1_CR_CLOCK (1 << 1) +#define TIMER_1_CR_INT (1 << 2) +#define TIMER_2_CR_ENABLE (1 << 3) +#define TIMER_2_CR_CLOCK (1 << 4) +#define TIMER_2_CR_INT (1 << 5) +#define TIMER_3_CR_ENABLE (1 << 6) +#define TIMER_3_CR_CLOCK (1 << 7) +#define TIMER_3_CR_INT (1 << 8) + +/* + * IRQ handler for the timer + */ +static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id) +{ + timer_tick(); + + return IRQ_HANDLED; +} + +static struct irqaction gemini_timer_irq = { + .name = "Gemini Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = gemini_timer_interrupt, +}; + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +void __init gemini_timer_init(void) +{ + unsigned int tick_rate, reg_v; + + reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS)); + tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000; + + printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000); + + tick_rate /= 6; /* APB bus run AHB*(1/6) */ + + switch(reg_v & CPU_AHB_RATIO_MASK) { + case CPU_AHB_1_1: + printk(KERN_CONT "(1/1)\n"); + break; + case CPU_AHB_3_2: + printk(KERN_CONT "(3/2)\n"); + break; + case CPU_AHB_24_13: + printk(KERN_CONT "(24/13)\n"); + break; + case CPU_AHB_2_1: + printk(KERN_CONT "(2/1)\n"); + break; + } + + /* + * Make irqs happen for the system timer + */ + setup_irq(IRQ_TIMER2, &gemini_timer_irq); + /* Start the timer */ + __raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE))); + __raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE))); + __raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); +} diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h index e4a7c760d52..a708d24ee46 100644 --- a/arch/arm/mach-h720x/include/mach/system.h +++ b/arch/arm/mach-h720x/include/mach/system.h @@ -25,7 +25,7 @@ static void arch_idle(void) } -static __inline__ void arch_reset(char mode) +static __inline__ void arch_reset(char mode, const char *cmd) { CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; } diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 887cb21f75b..05f1739ee12 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -29,7 +29,6 @@ #include <linux/string.h> #include <asm/errno.h> -#include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/imx-regs.h> @@ -245,43 +244,8 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info) imx_mmc_device.dev.platform_data = info; } -static struct imx_fb_platform_data imx_fb_info; - -void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info) -{ - memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data)); -} - -static struct resource imxfb_resources[] = { - [0] = { - .start = 0x00205000, - .end = 0x002050FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = LCDC_INT, - .end = LCDC_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 fb_dma_mask = ~(u64)0; - -static struct platform_device imxfb_device = { - .name = "imx-fb", - .id = 0, - .dev = { - .platform_data = &imx_fb_info, - .dma_mask = &fb_dma_mask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(imxfb_resources), - .resource = imxfb_resources, -}; - static struct platform_device *devices[] __initdata = { &imx_mmc_device, - &imxfb_device, }; static struct map_desc imx_io_desc[] __initdata = { diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h index adee7e51bab..46d4ca91af7 100644 --- a/arch/arm/mach-imx/include/mach/system.h +++ b/arch/arm/mach-imx/include/mach/system.h @@ -32,7 +32,7 @@ arch_idle(void) } static inline void -arch_reset(char mode) +arch_reset(char mode, const char *cmd) { cpu_reset(0); } diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h index c485345c8c7..e1551b8dab7 100644 --- a/arch/arm/mach-integrator/include/mach/system.h +++ b/arch/arm/mach-integrator/include/mach/system.h @@ -32,7 +32,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* * To reset, we hit the on-board reset register diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index e012bf13c95..42ae29b288a 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -59,7 +59,10 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x) }) #define __arch_page_to_dma(dev, page) \ - __arch_virt_to_dma(dev, page_address(page)) + ({ \ + /* __is_lbus_virt() can never be true for RAM pages */ \ + (dma_addr_t)page_to_phys(page); \ + }) #endif /* CONFIG_ARCH_IOP13XX */ #endif /* !ASSEMBLY */ diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h index c7127f416e1..d0c66ef450a 100644 --- a/arch/arm/mach-iop13xx/include/mach/system.h +++ b/arch/arm/mach-iop13xx/include/mach/system.h @@ -13,7 +13,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* * Reset the internal bus (warning both cores are reset) diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 673b0db2203..4873f26a42e 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -1026,8 +1026,10 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) which_atu = 0; } - if (!which_atu) + if (!which_atu) { + kfree(res); return 0; + } switch(which_atu) { case IOP13XX_INIT_ATU_ATUX: @@ -1074,6 +1076,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) sys->map_irq = iop13xx_pcie_map_irq; break; default: + kfree(res); return 0; } diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h index 32d9e5b0a28..a4b808fe0d8 100644 --- a/arch/arm/mach-iop32x/include/mach/system.h +++ b/arch/arm/mach-iop32x/include/mach/system.h @@ -16,7 +16,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { local_irq_disable(); diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h index 0cb3ad862ac..f192a34be07 100644 --- a/arch/arm/mach-iop33x/include/mach/system.h +++ b/arch/arm/mach-iop33x/include/mach/system.h @@ -14,7 +14,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { *IOP3XX_PCSR = 0x30; diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h index 2e9c68f95a2..de370992c84 100644 --- a/arch/arm/mach-ixp2000/include/mach/system.h +++ b/arch/arm/mach-ixp2000/include/mach/system.h @@ -17,7 +17,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { local_irq_disable(); diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h index d57c3fc10f1..8920ff2dff1 100644 --- a/arch/arm/mach-ixp23xx/include/mach/system.h +++ b/arch/arm/mach-ixp23xx/include/mach/system.h @@ -19,7 +19,7 @@ static inline void arch_idle(void) #endif } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* First try machine specific support */ if (machine_is_ixdp2351()) { diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index d816c51320c..70afcfe5b88 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -366,7 +366,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, } void __init ixp4xx_pci_preinit(void) -{ +{ unsigned long cpuid = read_cpuid_id(); /* @@ -386,17 +386,17 @@ void __init ixp4xx_pci_preinit(void) pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n"); - /* + /* * We use identity AHB->PCI address translation * in the 0x48000000 to 0x4bffffff address space */ *PCI_PCIMEMBASE = 0x48494A4B; - /* + /* * We also use identity PCI->AHB address translation * in 4 16MB BARs that begin at the physical memory start */ - *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + + *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + ((PHYS_OFFSET & 0xFF000000) >> 8) + ((PHYS_OFFSET & 0xFF000000) >> 16) + ((PHYS_OFFSET & 0xFF000000) >> 24) + @@ -408,18 +408,19 @@ void __init ixp4xx_pci_preinit(void) pr_debug("setup BARs in controller\n"); /* - * We configure the PCI inbound memory windows to be + * We configure the PCI inbound memory windows to be * 1:1 mapped to SDRAM */ - local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000); - local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000); - local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000); - local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000); + local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET); + local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M); + local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M); + local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M); /* - * Enable CSR window at 0xff000000. + * Enable CSR window at 64 MiB to allow PCI masters + * to continue prefetching past 64 MiB boundary. */ - local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008); + local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M); /* * Enable the IO window to be way up high, at 0xfffffc00 @@ -500,7 +501,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) return 1; } -struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys) +struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys) { return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys); } diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h index 51bd69c46d9..def7773be67 100644 --- a/arch/arm/mach-ixp4xx/include/mach/cpu.h +++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h @@ -17,26 +17,31 @@ #include <asm/cputype.h> /* Processor id value in CP15 Register 0 */ -#define IXP425_PROCESSOR_ID_VALUE 0x690541c0 -#define IXP435_PROCESSOR_ID_VALUE 0x69054040 -#define IXP465_PROCESSOR_ID_VALUE 0x69054200 -#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0 - -#define cpu_is_ixp42x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP425_PROCESSOR_ID_VALUE) -#define cpu_is_ixp43x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP435_PROCESSOR_ID_VALUE) -#define cpu_is_ixp46x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP465_PROCESSOR_ID_VALUE) +#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */ +#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0 + +#define IXP43X_PROCESSOR_ID_VALUE 0x69054040 +#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0 + +#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */ +#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0 + +#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \ + IXP42X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \ + IXP43X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \ + IXP46X_PROCESSOR_ID_VALUE) static inline u32 ixp4xx_read_feature_bits(void) { unsigned int val = ~*IXP4XX_EXP_CFG2; - val &= ~IXP4XX_FEATURE_RESERVED; - if (!cpu_is_ixp46x()) - val &= ~IXP4XX_FEATURE_IXP46X_ONLY; - return val; + if (cpu_is_ixp42x()) + return val & IXP42X_FEATURE_MASK; + if (cpu_is_ixp43x()) + return val & IXP43X_FEATURE_MASK; + return val & IXP46X_FEATURE_MASK; } static inline void ixp4xx_write_feature_bits(u32 value) diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index ad9c888dd85..97c530f66e7 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -604,6 +604,7 @@ #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ /* "fuse" bits of IXP_EXP_CFG2 */ +/* All IXP4xx CPUs */ #define IXP4XX_FEATURE_RCOMP (1 << 0) #define IXP4XX_FEATURE_USB_DEVICE (1 << 1) #define IXP4XX_FEATURE_HASH (1 << 2) @@ -619,20 +620,41 @@ #define IXP4XX_FEATURE_RESET_NPEB (1 << 12) #define IXP4XX_FEATURE_RESET_NPEC (1 << 13) #define IXP4XX_FEATURE_PCI (1 << 14) -#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) #define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16) +#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) +#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \ + IXP4XX_FEATURE_USB_DEVICE | \ + IXP4XX_FEATURE_HASH | \ + IXP4XX_FEATURE_AES | \ + IXP4XX_FEATURE_DES | \ + IXP4XX_FEATURE_HDLC | \ + IXP4XX_FEATURE_AAL | \ + IXP4XX_FEATURE_HSS | \ + IXP4XX_FEATURE_UTOPIA | \ + IXP4XX_FEATURE_NPEB_ETH0 | \ + IXP4XX_FEATURE_NPEC_ETH | \ + IXP4XX_FEATURE_RESET_NPEA | \ + IXP4XX_FEATURE_RESET_NPEB | \ + IXP4XX_FEATURE_RESET_NPEC | \ + IXP4XX_FEATURE_PCI | \ + IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \ + IXP4XX_FEATURE_XSCALE_MAX_FREQ) + + +/* IXP43x/46x CPUs */ +#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) #define IXP4XX_FEATURE_USB_HOST (1 << 18) #define IXP4XX_FEATURE_NPEA_ETH (1 << 19) +#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \ + IXP4XX_FEATURE_ECC_TIMESYNC | \ + IXP4XX_FEATURE_USB_HOST | \ + IXP4XX_FEATURE_NPEA_ETH) + +/* IXP46x CPU (including IXP455) only */ #define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20) #define IXP4XX_FEATURE_RSA (1 << 21) -#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) -#define IXP4XX_FEATURE_RESERVED (0xFF << 24) - -#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \ - IXP4XX_FEATURE_USB_HOST | \ - IXP4XX_FEATURE_NPEA_ETH | \ - IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ - IXP4XX_FEATURE_RSA | \ - IXP4XX_FEATURE_XSCALE_MAX_FREQ) +#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \ + IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ + IXP4XX_FEATURE_RSA) #endif diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h index 92a7e8ddf69..d2aa26f5acd 100644 --- a/arch/arm/mach-ixp4xx/include/mach/system.h +++ b/arch/arm/mach-ixp4xx/include/mach/system.h @@ -20,7 +20,7 @@ static inline void arch_idle(void) } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { if ( 1 && mode == 's') { /* Jump into ROM at address 0 */ diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index c73a94d0ca2..25231023490 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev) for (i = 0; i < image->size; i++) image->data[i] = swab32(image->data[i]); - if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) { - print_npe(KERN_INFO, npe, "IXP46x firmware ignored on " + if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) { + print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on " "IXP42x\n"); goto err; } @@ -596,7 +596,7 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev) "revision 0x%X:%X\n", (image->id >> 16) & 0xFF, (image->id >> 8) & 0xFF, image->id & 0xFF); - if (!cpu_is_ixp46x()) { + if (cpu_is_ixp42x()) { if (!npe->id) instr_size = NPE_A_42X_INSTR_SIZE; else diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 3600cd9f051..b5421cccd7e 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -20,6 +20,18 @@ config MACH_RD88F6281 Say 'Y' here if you want your kernel to support the Marvell RD-88F6281 Reference Board. +config MACH_SHEEVAPLUG + bool "Marvell SheevaPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell SheevaPlug Reference Board. + +config MACH_TS219 + bool "QNAP TS-119 and TS-219 Turbo NAS" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-119 and TS-219 Turbo NAS devices. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index b96c55dad34..8f03c9b9bdd 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,5 +1,7 @@ -obj-y += common.o addr-map.o irq.o pcie.o +obj-y += common.o addr-map.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_TS219) += ts219-setup.o diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index b3404b7775b..3d2fae84651 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -14,6 +14,7 @@ #include <linux/serial_8250.h> #include <linux/mbus.h> #include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> #include <linux/spi/orion_spi.h> #include <net/dsa.h> @@ -24,6 +25,7 @@ #include <mach/kirkwood.h> #include <plat/cache-feroceon-l2.h> #include <plat/ehci-orion.h> +#include <plat/mvsdio.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> #include <plat/time.h> @@ -231,14 +233,17 @@ static struct platform_device kirkwood_switch_device = { void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) { + int i; + if (irq != NO_IRQ) { kirkwood_switch_resources[0].start = irq; kirkwood_switch_resources[0].end = irq; kirkwood_switch_device.num_resources = 1; } - d->mii_bus = &kirkwood_ge00_shared.dev; d->netdev = &kirkwood_ge00.dev; + for (i = 0; i < d->nr_chips; i++) + d->chip[i].mii_bus = &kirkwood_ge00_shared.dev; kirkwood_switch_device.dev.platform_data = d; platform_device_register(&kirkwood_switch_device); @@ -254,7 +259,7 @@ static struct resource kirkwood_rtc_resource = { .flags = IORESOURCE_MEM, }; -void __init kirkwood_rtc_init(void) +static void __init kirkwood_rtc_init(void) { platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1); } @@ -296,6 +301,50 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) /***************************************************************************** + * SD/SDIO/MMC + ****************************************************************************/ +static struct resource mvsdio_resources[] = { + [0] = { + .start = SDIO_PHYS_BASE, + .end = SDIO_PHYS_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KIRKWOOD_SDIO, + .end = IRQ_KIRKWOOD_SDIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 mvsdio_dmamask = 0xffffffffUL; + +static struct platform_device kirkwood_sdio = { + .name = "mvsdio", + .id = -1, + .dev = { + .dma_mask = &mvsdio_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(mvsdio_resources), + .resource = mvsdio_resources, +}; + +void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) +{ + u32 dev, rev; + + kirkwood_pcie_id(&dev, &rev); + if (rev == 0) /* catch all Kirkwood Z0's */ + mvsdio_data->clock = 100000000; + else + mvsdio_data->clock = 200000000; + mvsdio_data->dram = &kirkwood_mbus_dram_info; + kirkwood_sdio.dev.platform_data = mvsdio_data; + platform_device_register(&kirkwood_sdio); +} + + +/***************************************************************************** * SPI ****************************************************************************/ static struct orion_spi_info kirkwood_spi_plat_data = { @@ -326,6 +375,45 @@ void __init kirkwood_spi_init() /***************************************************************************** + * I2C + ****************************************************************************/ +static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource kirkwood_i2c_resources[] = { + { + .name = "i2c", + .start = I2C_PHYS_BASE, + .end = I2C_PHYS_BASE + 0x1f, + .flags = IORESOURCE_MEM, + }, { + .name = "i2c", + .start = IRQ_KIRKWOOD_TWSI, + .end = IRQ_KIRKWOOD_TWSI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_i2c = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(kirkwood_i2c_resources), + .resource = kirkwood_i2c_resources, + .dev = { + .platform_data = &kirkwood_i2c_pdata, + }, +}; + +void __init kirkwood_i2c_init(void) +{ + platform_device_register(&kirkwood_i2c); +} + + +/***************************************************************************** * UART0 ****************************************************************************/ static struct plat_serial8250_port kirkwood_uart0_data[] = { @@ -502,7 +590,7 @@ static struct platform_device kirkwood_xor01_channel = { }, }; -void __init kirkwood_xor0_init(void) +static void __init kirkwood_xor0_init(void) { platform_device_register(&kirkwood_xor0_shared); @@ -600,7 +688,7 @@ static struct platform_device kirkwood_xor11_channel = { }, }; -void __init kirkwood_xor1_init(void) +static void __init kirkwood_xor1_init(void) { platform_device_register(&kirkwood_xor1_shared); @@ -708,4 +796,9 @@ void __init kirkwood_init(void) #ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); #endif + + /* internal devices that every board has */ + kirkwood_rtc_init(); + kirkwood_xor0_init(); + kirkwood_xor1_init(); } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index fe367c18e72..6ee88406f38 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -14,6 +14,7 @@ struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; +struct mvsdio_platform_data; /* * Basic Kirkwood init functions used early by machine-setup. @@ -33,14 +34,14 @@ void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data); void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data); void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq); void kirkwood_pcie_init(void); -void kirkwood_rtc_init(void); void kirkwood_sata_init(struct mv_sata_platform_data *sata_data); +void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data); void kirkwood_spi_init(void); +void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); -void kirkwood_xor0_init(void); -void kirkwood_xor1_init(void); +extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index a14c2948c62..5505d583775 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -11,18 +11,59 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> -#include <linux/timer.h> +#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/pci.h> #include <mach/kirkwood.h> +#include <plat/orion_nand.h> +#include <plat/mvsdio.h> #include "common.h" +#include "mpp.h" + +static struct mtd_partition db88f6281_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct resource db88f6281_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KIRKWOOD_NAND_MEM_PHYS_BASE, + .end = KIRKWOOD_NAND_MEM_PHYS_BASE + + KIRKWOOD_NAND_MEM_SIZE - 1, +}; + +static struct orion_nand_data db88f6281_nand_data = { + .parts = db88f6281_nand_parts, + .nr_parts = ARRAY_SIZE(db88f6281_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, + .chip_delay = 25, +}; + +static struct platform_device db88f6281_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &db88f6281_nand_data, + }, + .resource = &db88f6281_nand_resource, + .num_resources = 1, +}; static struct mv643xx_eth_platform_data db88f6281_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), @@ -32,18 +73,32 @@ static struct mv_sata_platform_data db88f6281_sata_data = { .n_ports = 2, }; +static struct mvsdio_platform_data db88f6281_mvsdio_data = { + .gpio_write_protect = 37, + .gpio_card_detect = 38, +}; + +static unsigned int db88f6281_mpp_config[] __initdata = { + MPP37_GPIO, + MPP38_GPIO, + 0 +}; + static void __init db88f6281_init(void) { /* * Basic setup. Needs to be called early. */ kirkwood_init(); + kirkwood_mpp_conf(db88f6281_mpp_config); kirkwood_ehci_init(); kirkwood_ge00_init(&db88f6281_ge00_data); - kirkwood_rtc_init(); kirkwood_sata_init(&db88f6281_sata_data); kirkwood_uart0_init(); + kirkwood_sdio_init(&db88f6281_mvsdio_data); + + platform_device_register(&db88f6281_nand_flash); } static int __init db88f6281_pci_init(void) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index ada480c0e19..38c98685359 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -93,6 +93,7 @@ #define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) #define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) #define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) +#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) #define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) #define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) @@ -116,5 +117,7 @@ #define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) +#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) + #endif diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h index 8510f6cfdab..23a1914c1da 100644 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ b/arch/arm/mach-kirkwood/include/mach/system.h @@ -17,7 +17,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* * Enable soft reset to assert RSTOUTn. diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c new file mode 100644 index 00000000000..63c44934391 --- /dev/null +++ b/arch/arm/mach-kirkwood/mpp.c @@ -0,0 +1,97 @@ +/* + * arch/arm/mach-kirkwood/mpp.c + * + * MPP functions for Marvell Kirkwood SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <asm/gpio.h> +#include <mach/hardware.h> +#include "common.h" +#include "mpp.h" + +static unsigned int __init kirkwood_variant(void) +{ + u32 dev, rev; + + kirkwood_pcie_id(&dev, &rev); + + if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) + return MPP_F6281_MASK; + if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) + return MPP_F6192_MASK; + if (dev == MV88F6180_DEV_ID) + return MPP_F6180_MASK; + + printk(KERN_ERR "MPP setup: unknown kirkwood variant " + "(dev %#x rev %#x)\n", dev, rev); + return 0; +} + +#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4) +#define MPP_NR_REGS (1 + MPP_MAX/8) + +void __init kirkwood_mpp_conf(unsigned int *mpp_list) +{ + u32 mpp_ctrl[MPP_NR_REGS]; + unsigned int variant_mask; + int i; + + variant_mask = kirkwood_variant(); + if (!variant_mask) + return; + + printk(KERN_DEBUG "initial MPP regs:"); + for (i = 0; i < MPP_NR_REGS; i++) { + mpp_ctrl[i] = readl(MPP_CTRL(i)); + printk(" %08x", mpp_ctrl[i]); + } + printk("\n"); + + while (*mpp_list) { + unsigned int num = MPP_NUM(*mpp_list); + unsigned int sel = MPP_SEL(*mpp_list); + int shift, gpio_mode; + + if (num > MPP_MAX) { + printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP " + "number (%u)\n", num); + continue; + } + if (!(*mpp_list & variant_mask)) { + printk(KERN_WARNING + "kirkwood_mpp_conf: requested MPP%u config " + "unavailable on this hardware\n", num); + continue; + } + + shift = (num & 7) << 2; + mpp_ctrl[num / 8] &= ~(0xf << shift); + mpp_ctrl[num / 8] |= sel << shift; + + gpio_mode = 0; + if (*mpp_list & MPP_INPUT_MASK) + gpio_mode |= GPIO_INPUT_OK; + if (*mpp_list & MPP_OUTPUT_MASK) + gpio_mode |= GPIO_OUTPUT_OK; + if (sel != 0) + gpio_mode = 0; + orion_gpio_set_valid(num, gpio_mode); + + mpp_list++; + } + + printk(KERN_DEBUG " final MPP regs:"); + for (i = 0; i < MPP_NR_REGS; i++) { + writel(mpp_ctrl[i], MPP_CTRL(i)); + printk(" %08x", mpp_ctrl[i]); + } + printk("\n"); +} diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h new file mode 100644 index 00000000000..e021a80c2ca --- /dev/null +++ b/arch/arm/mach-kirkwood/mpp.h @@ -0,0 +1,303 @@ +/* + * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins + * + * Copyright 2009: Marvell Technology Group Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __KIRKWOOD_MPP_H +#define __KIRKWOOD_MPP_H + +#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \ + /* MPP number */ ((_num) & 0xff) | \ + /* MPP select value */ (((_sel) & 0xf) << 8) | \ + /* may be input signal */ ((!!(_in)) << 12) | \ + /* may be output signal */ ((!!(_out)) << 13) | \ + /* available on F6180 */ ((!!(_F6180)) << 14) | \ + /* available on F6190 */ ((!!(_F6190)) << 15) | \ + /* available on F6192 */ ((!!(_F6192)) << 16) | \ + /* available on F6281 */ ((!!(_F6281)) << 17)) + +#define MPP_NUM(x) ((x) & 0xff) +#define MPP_SEL(x) (((x) >> 8) & 0xf) + + /* num sel i o 6180 6190 6192 6281 */ + +#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0 ) +#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0 ) + +#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0 ) +#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0 ) +#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0 ) +#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1 ) + +#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1 ) + +#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1 ) + +#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1 ) + +#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1 ) + +#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1 ) +#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1 ) +#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1 ) + +#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1 ) +#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1 ) +#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1 ) + +#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1 ) +#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1 ) +#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1 ) + +#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1 ) +#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1 ) +#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1 ) + +#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP8_TW_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1 ) +#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1 ) +#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1 ) +#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1 ) +#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1 ) + +#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP9_TW_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1 ) +#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1 ) +#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1 ) +#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1 ) +#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1 ) + +#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1 ) +#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1 ) +#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1 ) +#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1 ) + +#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1 ) +#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1 ) +#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1 ) +#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1 ) +#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1 ) +#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1 ) + +#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1 ) + +#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1 ) + +#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1 ) +#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1 ) +#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1 ) + +#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1 ) +#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1 ) + +#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1 ) +#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1 ) +#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1 ) +#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1 ) + +#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1 ) +#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1 ) + +#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1 ) + +#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1 ) +#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1 ) + +#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP20_GE1_0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP20_AUDIO_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1 ) +#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1 ) + +#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP21_GE1_1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP21_AUDIO_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1 ) +#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1 ) + +#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP22_GE1_2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP22_AUDIO_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1 ) +#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1 ) + +#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1 ) +#define MPP23_GE1_3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP23_AUDIO_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1 ) +#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1 ) + +#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP24_TDM_SPI_CS0 DEV( 24, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP24_GE1_4 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP24_AUDIO_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1 ) + +#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP25_GE1_5 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP25_AUDIO_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1 ) + +#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1 ) +#define MPP26_GE1_6 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP26_AUDIO_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1 ) + +#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP27_GE1_7 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP27_AUDIO_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1 ) + +#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1 ) +#define MPP28_GE1_8 MPP( 28, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP28_AUDIO_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1 ) + +#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1 ) +#define MPP29_GE1_9 MPP( 29, 0x3, 0, 0, 0, 1, 1, 1 ) + +#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1 ) +#define MPP30_GE1_10 MPP( 30, 0x3, 0, 0, 0, 1, 1, 1 ) + +#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1 ) +#define MPP31_GE1_11 MPP( 31, 0x3, 0, 0, 0, 1, 1, 1 ) + +#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1 ) +#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1 ) +#define MPP32_GE1_12 MPP( 32, 0x3, 0, 0, 0, 1, 1, 1 ) + +#define MPP33_GPIO MPP( 33, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP33_GE1_13 MPP( 33, 0x3, 0, 0, 0, 1, 1, 1 ) + +#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1 ) +#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP34_GE1_14 MPP( 34, 0x3, 0, 0, 0, 1, 1, 1 ) + +#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1 ) +#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1 ) +#define MPP35_GE1_15 MPP( 35, 0x3, 0, 0, 0, 1, 1, 1 ) +#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1 ) +#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1 ) + +#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP36_AUDIO_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1 ) + +#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP37_AUDIO_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1 ) + +#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP38_AUDIO_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1 ) + +#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP39_AUDIO_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1 ) + +#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP40_AUDIO_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1 ) + +#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1 ) +#define MPP41_AUDIO_I2SLRC MPP( 41, 0x4, 0, 1, 1, 0, 0, 1 ) + +#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP42_AUDIO_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1 ) + +#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1 ) +#define MPP43_AUDIO_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1 ) + +#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1 ) +#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1 ) +#define MPP44_AUDIO_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1 ) + +#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1 ) +#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1 ) + +#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1 ) +#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1 ) + +#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1 ) +#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1 ) + +#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 ) +#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 ) + +#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 ) +#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 ) +#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1 ) + +#define MPP_MAX 49 + +void kirkwood_mpp_conf(unsigned int *mpp_list); + +#endif diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index b1d1a87a682..2f0e4ef3db0 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -11,11 +11,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> -#include <linux/timer.h> +#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/spi/flash.h> @@ -23,7 +20,6 @@ #include <linux/spi/orion_spi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/pci.h> #include <mach/kirkwood.h> #include "common.h" @@ -61,14 +57,11 @@ static void __init rd88f6192_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6192_ge00_data); - kirkwood_rtc_init(); kirkwood_sata_init(&rd88f6192_sata_data); spi_register_board_info(rd88F6192_spi_slave_info, ARRAY_SIZE(rd88F6192_spi_slave_info)); kirkwood_spi_init(); kirkwood_uart0_init(); - kirkwood_xor0_init(); - kirkwood_xor1_init(); } static int __init rd88f6192_pci_init(void) diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 9a0e905d10c..31e996d65fc 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -11,21 +11,20 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/pci.h> #include <linux/irq.h> -#include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> -#include <linux/timer.h> +#include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/pci.h> #include <mach/kirkwood.h> +#include <plat/mvsdio.h> #include <plat/orion_nand.h> #include "common.h" +#include "mpp.h" static struct mtd_partition rd88f6281_nand_parts[] = { { @@ -75,7 +74,7 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .duplex = DUPLEX_FULL, }; -static struct dsa_platform_data rd88f6281_switch_data = { +static struct dsa_chip_data rd88f6281_switch_chip_data = { .port_names[0] = "lan1", .port_names[1] = "lan2", .port_names[2] = "lan3", @@ -83,6 +82,11 @@ static struct dsa_platform_data rd88f6281_switch_data = { .port_names[5] = "cpu", }; +static struct dsa_platform_data rd88f6281_switch_plat_data = { + .nr_chips = 1, + .chip = &rd88f6281_switch_chip_data, +}; + static struct mv643xx_eth_platform_data rd88f6281_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; @@ -91,6 +95,15 @@ static struct mv_sata_platform_data rd88f6281_sata_data = { .n_ports = 2, }; +static struct mvsdio_platform_data rd88f6281_mvsdio_data = { + .gpio_card_detect = 28, +}; + +static unsigned int rd88f6281_mpp_config[] __initdata = { + MPP28_GPIO, + 0 +}; + static void __init rd88f6281_init(void) { u32 dev, rev; @@ -99,21 +112,22 @@ static void __init rd88f6281_init(void) * Basic setup. Needs to be called early. */ kirkwood_init(); + kirkwood_mpp_conf(rd88f6281_mpp_config); kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); kirkwood_pcie_id(&dev, &rev); if (rev == MV88F6281_REV_A0) { - rd88f6281_switch_data.sw_addr = 10; + rd88f6281_switch_chip_data.sw_addr = 10; kirkwood_ge01_init(&rd88f6281_ge01_data); } else { - rd88f6281_switch_data.port_names[4] = "wan"; + rd88f6281_switch_chip_data.port_names[4] = "wan"; } - kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ); + kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ); - kirkwood_rtc_init(); kirkwood_sata_init(&rd88f6281_sata_data); + kirkwood_sdio_init(&rd88f6281_mvsdio_data); kirkwood_uart0_init(); platform_device_register(&rd88f6281_nand_flash); diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c new file mode 100644 index 00000000000..831e4a56cae --- /dev/null +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -0,0 +1,136 @@ +/* + * arch/arm/mach-kirkwood/sheevaplug-setup.c + * + * Marvell SheevaPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include <plat/orion_nand.h> +#include "common.h" +#include "mpp.h" + +static struct mtd_partition sheevaplug_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct resource sheevaplug_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KIRKWOOD_NAND_MEM_PHYS_BASE, + .end = KIRKWOOD_NAND_MEM_PHYS_BASE + + KIRKWOOD_NAND_MEM_SIZE - 1, +}; + +static struct orion_nand_data sheevaplug_nand_data = { + .parts = sheevaplug_nand_parts, + .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, + .chip_delay = 25, +}; + +static struct platform_device sheevaplug_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &sheevaplug_nand_data, + }, + .resource = &sheevaplug_nand_resource, + .num_resources = 1, +}; + +static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mvsdio_platform_data sheevaplug_mvsdio_data = { + // unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led sheevaplug_led_pins[] = { + { + .name = "plug:green:health", + .default_trigger = "default-on", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data sheevaplug_led_data = { + .leds = sheevaplug_led_pins, + .num_leds = ARRAY_SIZE(sheevaplug_led_pins), +}; + +static struct platform_device sheevaplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &sheevaplug_led_data, + } +}; + +static unsigned int sheevaplug_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP49_GPIO, /* LED */ + 0 +}; + +static void __init sheevaplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(sheevaplug_mpp_config); + + kirkwood_uart0_init(); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&sheevaplug_ge00_data); + kirkwood_sdio_init(&sheevaplug_mvsdio_data); + + platform_device_register(&sheevaplug_nand_flash); + platform_device_register(&sheevaplug_leds); +} + +MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") + /* Maintainer: shadi Ammouri <shadi@marvell.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = sheevaplug_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c new file mode 100644 index 00000000000..dda5743cf3e --- /dev/null +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -0,0 +1,220 @@ +/* + * + * QNAP TS-119/TS-219 Turbo NAS Board Setup + * + * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <linux/i2c.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/timex.h> +#include <linux/serial_reg.h> +#include <linux/pci.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +/**************************************************************************** + * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the + * partitions on the device because we want to keep compatability with + * the QNAP firmware. + * Layout as used by QNAP: + * 0x00000000-0x00080000 : "U-Boot" + * 0x00200000-0x00400000 : "Kernel" + * 0x00400000-0x00d00000 : "RootFS" + * 0x00d00000-0x01000000 : "RootFS2" + * 0x00080000-0x000c0000 : "U-Boot Config" + * 0x000c0000-0x00200000 : "NAS Config" + * + * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout + * used by the QNAP TS-109/TS-209. + * + ***************************************************************************/ + +static struct mtd_partition qnap_ts219_partitions[] = { + { + .name = "U-Boot", + .size = 0x00080000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .size = 0x00200000, + .offset = 0x00200000, + }, { + .name = "RootFS1", + .size = 0x00900000, + .offset = 0x00400000, + }, { + .name = "RootFS2", + .size = 0x00300000, + .offset = 0x00d00000, + }, { + .name = "U-Boot Config", + .size = 0x00040000, + .offset = 0x00080000, + }, { + .name = "NAS Config", + .size = 0x00140000, + .offset = 0x000c0000, + }, +}; + +static const struct flash_platform_data qnap_ts219_flash = { + .type = "m25p128", + .name = "spi_flash", + .parts = qnap_ts219_partitions, + .nr_parts = ARRAY_SIZE(qnap_ts219_partitions), +}; + +static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &qnap_ts219_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = { + I2C_BOARD_INFO("s35390a", 0x30), +}; + +static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data qnap_ts219_sata_data = { + .n_ports = 2, +}; + +static struct gpio_keys_button qnap_ts219_buttons[] = { + { + .code = KEY_COPY, + .gpio = 15, + .desc = "USB Copy", + .active_low = 1, + }, + { + .code = KEY_RESTART, + .gpio = 16, + .desc = "Reset", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data qnap_ts219_button_data = { + .buttons = qnap_ts219_buttons, + .nbuttons = ARRAY_SIZE(qnap_ts219_buttons), +}; + +static struct platform_device qnap_ts219_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &qnap_ts219_button_data, + } +}; + +static unsigned int qnap_ts219_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, /* PIC controller */ + MPP14_UART1_RXD, /* PIC controller */ + MPP15_GPIO, /* USB Copy button */ + MPP16_GPIO, /* Reset button */ + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_SATA1_PRESENTn, + MPP23_SATA0_PRESENTn, + 0 +}; + + +/***************************************************************************** + * QNAP TS-x19 specific power off method via UART1-attached PIC + ****************************************************************************/ + +#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) + +void qnap_ts219_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200)); + + pr_info("%s: triggering power-off...\n", __func__); + + /* hijack UART1 and reset into sane state (19200,8n1) */ + writel(0x83, UART1_REG(LCR)); + writel(divisor & 0xff, UART1_REG(DLL)); + writel((divisor >> 8) & 0xff, UART1_REG(DLM)); + writel(0x03, UART1_REG(LCR)); + writel(0x00, UART1_REG(IER)); + writel(0x00, UART1_REG(FCR)); + writel(0x00, UART1_REG(MCR)); + + /* send the power-off command 'A' to PIC */ + writel('A', UART1_REG(TX)); +} + +static void __init qnap_ts219_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(qnap_ts219_mpp_config); + + kirkwood_uart0_init(); + kirkwood_uart1_init(); /* A PIC controller is connected here. */ + spi_register_board_info(qnap_ts219_spi_slave_info, + ARRAY_SIZE(qnap_ts219_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); + kirkwood_ge00_init(&qnap_ts219_ge00_data); + kirkwood_sata_init(&qnap_ts219_sata_data); + kirkwood_ehci_init(); + platform_device_register(&qnap_ts219_button_device); + + pm_power_off = qnap_ts219_power_off; + +} + +MACHINE_START(TS219, "QNAP TS-119/TS-219") + /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = qnap_ts219_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index 2754daabda5..fe0c82e30b2 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -14,6 +14,12 @@ config MACH_DSM320 Say 'Y' here if you want your kernel to run on the D-Link DSM-320 Wireless Media Player. +config MACH_ACS5K + bool "Brivo Systems LLC, ACS-5000 Master board" + help + say 'Y' here if you want your kernel to run on the Brivo + Systems LLC, ACS-5000 Master board. + endmenu endif diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index f735d2cc029..7e3e8160ed3 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_LEDS) += leds.o # Board-specific support obj-$(CONFIG_MACH_KS8695) += board-micrel.o obj-$(CONFIG_MACH_DSM320) += board-dsm320.o +obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c new file mode 100644 index 00000000000..9e3e5a640ad --- /dev/null +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -0,0 +1,233 @@ +/* + * arch/arm/mach-ks8695/board-acs5k.c + * + * Brivo Systems LLC, ACS-5000 Master Board + * + * Copyright 2008 Simtec Electronics + * Daniel Silverstone <dsilvers@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/pca953x.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/devices.h> +#include <mach/gpio.h> + +#include "generic.h" + +static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = { + .sda_pin = 4, + .scl_pin = 5, + .udelay = 10, +}; + +static struct platform_device acs5k_i2c_device = { + .name = "i2c-gpio", + .id = -1, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = &acs5k_i2c_device_platdata, + }, +}; + +static int acs5k_pca9555_setup(struct i2c_client *client, + unsigned gpio_base, unsigned ngpio, + void *context) +{ + static int acs5k_gpio_value[] = { + -1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1 + }; + int n; + + for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) { + gpio_request(gpio_base + n, "ACS-5000 GPIO Expander"); + if (acs5k_gpio_value[n] < 0) + gpio_direction_input(gpio_base + n); + else + gpio_direction_output(gpio_base + n, + acs5k_gpio_value[n]); + gpio_export(gpio_base + n, 0); /* Export, direction locked down */ + } + + return 0; +} + +static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = { + .gpio_base = 16, /* Start directly after the CPU's GPIO */ + .invert = 0, /* Do not invert */ + .setup = acs5k_pca9555_setup, +}; + +static struct i2c_board_info acs5k_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &acs5k_i2c_pca9555_platdata, + }, +}; + +static void __devinit acs5k_i2c_init(void) +{ + /* The gpio interface */ + platform_device_register(&acs5k_i2c_device); + /* I2C devices */ + i2c_register_board_info(0, acs5k_i2c_devs, + ARRAY_SIZE(acs5k_i2c_devs)); +} + +static struct mtd_partition acs5k_nor_partitions[] = { + [0] = { + .name = "Boot Agent and config", + .size = SZ_256K, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "Kernel", + .size = SZ_1M, + .offset = SZ_256K, + }, + [2] = { + .name = "SquashFS1", + .size = SZ_2M, + .offset = SZ_256K + SZ_1M, + }, + [3] = { + .name = "SquashFS2", + .size = SZ_4M + SZ_2M, + .offset = SZ_256K + SZ_1M + SZ_2M, + }, + [4] = { + .name = "Data", + .size = SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */ + .offset = SZ_256K + SZ_8M + SZ_1M, + } +}; + +static struct physmap_flash_data acs5k_nor_pdata = { + .width = 4, + .nr_parts = ARRAY_SIZE(acs5k_nor_partitions), + .parts = acs5k_nor_partitions, +}; + +static struct resource acs5k_nor_resource[] = { + [0] = { + .start = SZ_32M, /* We expect the bootloader to map + * the flash here. + */ + .end = SZ_32M + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SZ_32M + SZ_16M, + .end = SZ_32M + SZ_32M - SZ_256K - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device acs5k_device_nor = { + .name = "physmap-flash", + .id = -1, + .num_resources = ARRAY_SIZE(acs5k_nor_resource), + .resource = acs5k_nor_resource, + .dev = { + .platform_data = &acs5k_nor_pdata, + }, +}; + +static void __init acs5k_register_nor(void) +{ + int ret; + + if (acs5k_nor_partitions[0].mask_flags == 0) + printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n"); + + ret = platform_device_register(&acs5k_device_nor); + if (ret < 0) + printk(KERN_ERR "failed to register physmap-flash device\n"); +} + +static int __init acs5k_protection_setup(char *s) +{ + /* We can't allocate anything here but we should be able + * to trivially parse s and decide if we can protect the + * bootloader partition or not + */ + if (strcmp(s, "no") == 0) + acs5k_nor_partitions[0].mask_flags = 0; + + return 1; +} + +__setup("protect_bootloader=", acs5k_protection_setup); + +static void __init acs5k_init_gpio(void) +{ + int i; + + ks8695_register_gpios(); + for (i = 0; i < 4; ++i) + gpio_request(i, "ACS5K IRQ"); + gpio_request(7, "ACS5K KS_FRDY"); + for (i = 8; i < 16; ++i) + gpio_request(i, "ACS5K Unused"); + + gpio_request(3, "ACS5K CAN Control"); + gpio_request(6, "ACS5K Heartbeat"); + gpio_direction_output(3, 1); /* Default CAN_RESET high */ + gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */ + gpio_export(3, 0); /* export CAN_RESET as output only */ + gpio_export(6, 0); /* export KS8695_ACTIVE as output only */ +} + +static void __init acs5k_init(void) +{ + acs5k_init_gpio(); + + /* Network device */ + ks8695_add_device_lan(); /* eth0 = LAN */ + ks8695_add_device_wan(); /* ethX = WAN */ + + /* NOR devices */ + acs5k_register_nor(); + + /* I2C bus */ + acs5k_i2c_init(); +} + +MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") + /* Maintainer: Simtec Electronics. */ + .phys_io = KS8695_IO_PA, + .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc, + .boot_params = KS8695_SDRAM_PA + 0x100, + .map_io = ks8695_map_io, + .init_irq = ks8695_init_irq, + .init_machine = acs5k_init, + .timer = &ks8695_timer, +MACHINE_END diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index 6d5887cf574..76e5308685a 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -35,7 +35,11 @@ extern struct bus_type platform_bus_type; __phys_to_virt(x) : __bus_to_virt(x)); }) #define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \ (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); }) -#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x)) +#define __arch_page_to_dma(dev, x) \ + ({ dma_addr_t __dma = page_to_phys(page); \ + if (!is_lbus_device(dev)) \ + __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \ + __dma; }) #endif diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h index 5a9b032bdbe..fb1dda9be2d 100644 --- a/arch/arm/mach-ks8695/include/mach/system.h +++ b/arch/arm/mach-ks8695/include/mach/system.h @@ -27,7 +27,7 @@ static void arch_idle(void) } -static void arch_reset(char mode) +static void arch_reset(char mode, const char *cmd) { unsigned int reg; diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h index 5272abee0d0..e0dd3b6ae4a 100644 --- a/arch/arm/mach-l7200/include/mach/system.h +++ b/arch/arm/mach-l7200/include/mach/system.h @@ -19,7 +19,7 @@ static inline void arch_idle(void) *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */ } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { if (mode == 's') { cpu_reset(0); diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h index fa46bb1ef07..45a56d3b93d 100644 --- a/arch/arm/mach-lh7a40x/include/mach/system.h +++ b/arch/arm/mach-lh7a40x/include/mach/system.h @@ -13,7 +13,7 @@ static inline void arch_idle(void) cpu_do_idle (); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { cpu_reset (0); } diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h index 8db1147d4ec..c1de36fe9b3 100644 --- a/arch/arm/mach-loki/include/mach/system.h +++ b/arch/arm/mach-loki/include/mach/system.h @@ -17,7 +17,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* * Enable soft reset to assert RSTOUTn. diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig new file mode 100644 index 00000000000..c6a564fc4a7 --- /dev/null +++ b/arch/arm/mach-mmp/Kconfig @@ -0,0 +1,47 @@ +if ARCH_MMP + +menu "Marvell PXA168/910 Implmentations" + +config MACH_ASPENITE + bool "Marvell's PXA168 Aspenite Development Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + Aspenite Development Board. + +config MACH_ZYLONITE2 + bool "Marvell's PXA168 Zylonite2 Development Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + Zylonite2 Development Board. + +config MACH_TAVOREVB + bool "Marvell's PXA910 TavorEVB Development Board" + select CPU_PXA910 + help + Say 'Y' here if you want to support the Marvell PXA910-based + TavorEVB Development Board. + +config MACH_TTC_DKB + bool "Marvell's PXA910 TavorEVB Development Board" + select CPU_PXA910 + help + Say 'Y' here if you want to support the Marvell PXA910-based + TTC_DKB Development Board. + +endmenu + +config CPU_PXA168 + bool + select CPU_MOHAWK + help + Select code specific to PXA168 + +config CPU_PXA910 + bool + select CPU_MOHAWK + help + Select code specific to PXA910 + +endif diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile new file mode 100644 index 00000000000..6883e658488 --- /dev/null +++ b/arch/arm/mach-mmp/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for Marvell's PXA168 processors line +# + +obj-y += common.o clock.o devices.o irq.o time.o + +# SoC support +obj-$(CONFIG_CPU_PXA168) += pxa168.o +obj-$(CONFIG_CPU_PXA910) += pxa910.o + +# board support +obj-$(CONFIG_MACH_ASPENITE) += aspenite.o +obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o +obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o +obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot new file mode 100644 index 00000000000..574a4aa8321 --- /dev/null +++ b/arch/arm/mach-mmp/Makefile.boot @@ -0,0 +1 @@ + zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c new file mode 100644 index 00000000000..4562452d407 --- /dev/null +++ b/arch/arm/mach-mmp/aspenite.c @@ -0,0 +1,117 @@ +/* + * linux/arch/arm/mach-mmp/aspenite.c + * + * Support for the Marvell PXA168-based Aspenite and Zylonite2 + * Development Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/smc91x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-pxa168.h> +#include <mach/pxa168.h> +#include <mach/gpio.h> + +#include "common.h" + +static unsigned long common_pin_config[] __initdata = { + /* Data Flash Interface */ + GPIO0_DFI_D15, + GPIO1_DFI_D14, + GPIO2_DFI_D13, + GPIO3_DFI_D12, + GPIO4_DFI_D11, + GPIO5_DFI_D10, + GPIO6_DFI_D9, + GPIO7_DFI_D8, + GPIO8_DFI_D7, + GPIO9_DFI_D6, + GPIO10_DFI_D5, + GPIO11_DFI_D4, + GPIO12_DFI_D3, + GPIO13_DFI_D2, + GPIO14_DFI_D1, + GPIO15_DFI_D0, + + /* Static Memory Controller */ + GPIO18_SMC_nCS0, + GPIO34_SMC_nCS1, + GPIO23_SMC_nLUA, + GPIO25_SMC_nLLA, + GPIO28_SMC_RDY, + GPIO29_SMC_SCLK, + GPIO35_SMC_BE1, + GPIO36_SMC_BE2, + GPIO27_GPIO, /* Ethernet IRQ */ + + /* UART1 */ + GPIO107_UART1_RXD, + GPIO108_UART1_TXD, +}; + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = SMC_CS1_PHYS_BASE + 0x300, + .end = SMC_CS1_PHYS_BASE + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(27), + .end = gpio_to_irq(27), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static void __init common_init(void) +{ + mfp_config(ARRAY_AND_SIZE(common_pin_config)); + + /* on-chip devices */ + pxa168_add_uart(1); + + /* off-chip devices */ + platform_device_register(&smc91x_device); +} + +MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = common_init, +MACHINE_END + +MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = common_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c new file mode 100644 index 00000000000..2d9cc5a7122 --- /dev/null +++ b/arch/arm/mach-mmp/clock.c @@ -0,0 +1,83 @@ +/* + * linux/arch/arm/mach-mmp/clock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/regs-apbc.h> +#include "clock.h" + +static void apbc_clk_enable(struct clk *clk) +{ + uint32_t clk_rst; + + clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel); + __raw_writel(clk_rst, clk->clk_rst); +} + +static void apbc_clk_disable(struct clk *clk) +{ + __raw_writel(0, clk->clk_rst); +} + +struct clkops apbc_clk_ops = { + .enable = apbc_clk_enable, + .disable = apbc_clk_disable, +}; + +static DEFINE_SPINLOCK(clocks_lock); + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->enabled++ == 0) + clk->ops->enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + WARN_ON(clk->enabled == 0); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->enabled == 0) + clk->ops->disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long rate; + + if (clk->ops->getrate) + rate = clk->ops->getrate(clk); + else + rate = clk->rate; + + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clks_register(struct clk_lookup *clks, size_t num) +{ + int i; + + for (i = 0; i < num; i++) + clkdev_add(&clks[i]); +} diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h new file mode 100644 index 00000000000..ed967e78e6a --- /dev/null +++ b/arch/arm/mach-mmp/clock.h @@ -0,0 +1,71 @@ +/* + * linux/arch/arm/mach-mmp/clock.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/clkdev.h> + +struct clkops { + void (*enable)(struct clk *); + void (*disable)(struct clk *); + unsigned long (*getrate)(struct clk *); +}; + +struct clk { + const struct clkops *ops; + + void __iomem *clk_rst; /* clock reset control register */ + int fnclksel; /* functional clock select (APBC) */ + uint32_t enable_val; /* value for clock enable (APMU) */ + unsigned long rate; + int enabled; +}; + +extern struct clkops apbc_clk_ops; + +#define APBC_CLK(_name, _reg, _fnclksel, _rate) \ +struct clk clk_##_name = { \ + .clk_rst = (void __iomem *)APBC_##_reg, \ + .fnclksel = _fnclksel, \ + .rate = _rate, \ + .ops = &apbc_clk_ops, \ +} + +#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \ +struct clk clk_##_name = { \ + .clk_rst = (void __iomem *)APBC_##_reg, \ + .fnclksel = _fnclksel, \ + .rate = _rate, \ + .ops = _ops, \ +} + +#define APMU_CLK(_name, _reg, _eval, _rate) \ +struct clk clk_##_name = { \ + .clk_rst = (void __iomem *)APMU_##_reg, \ + .enable_val = _eval, \ + .rate = _rate, \ + .ops = &apmu_clk_ops, \ +} + +#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \ +struct clk clk_##_name = { \ + .clk_rst = (void __iomem *)APMU_##_reg, \ + .enable_val = _eval, \ + .rate = _rate, \ + .ops = _ops, \ +} + +#define INIT_CLKREG(_clk, _devname, _conname) \ + { \ + .clk = _clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } + +extern struct clk clk_pxa168_gpio; +extern struct clk clk_pxa168_timers; + +extern void clks_register(struct clk_lookup *, size_t); diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c new file mode 100644 index 00000000000..e1e66c18b44 --- /dev/null +++ b/arch/arm/mach-mmp/common.c @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-mmp/common.c + * + * Code common to PXA168 processor lines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/page.h> +#include <asm/mach/map.h> +#include <mach/addr-map.h> + +#include "common.h" + +static struct map_desc standard_io_desc[] __initdata = { + { + .pfn = __phys_to_pfn(APB_PHYS_BASE), + .virtual = APB_VIRT_BASE, + .length = APB_PHYS_SIZE, + .type = MT_DEVICE, + }, { + .pfn = __phys_to_pfn(AXI_PHYS_BASE), + .virtual = AXI_VIRT_BASE, + .length = AXI_PHYS_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init pxa_map_io(void) +{ + iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); +} diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h new file mode 100644 index 00000000000..c33fbbc4941 --- /dev/null +++ b/arch/arm/mach-mmp/common.h @@ -0,0 +1,13 @@ +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +struct sys_timer; + +extern void timer_init(int irq); + +extern struct sys_timer pxa168_timer; +extern struct sys_timer pxa910_timer; +extern void __init pxa168_init_irq(void); +extern void __init pxa910_init_irq(void); + +extern void __init icu_init_irq(void); +extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c new file mode 100644 index 00000000000..191d9dea873 --- /dev/null +++ b/arch/arm/mach-mmp/devices.c @@ -0,0 +1,69 @@ +/* + * linux/arch/arm/mach-mmp/devices.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <asm/irq.h> +#include <mach/devices.h> + +int __init pxa_register_device(struct pxa_device_desc *desc, + void *data, size_t size) +{ + struct platform_device *pdev; + struct resource res[2 + MAX_RESOURCE_DMA]; + int i, ret = 0, nres = 0; + + pdev = platform_device_alloc(desc->drv_name, desc->id); + if (pdev == NULL) + return -ENOMEM; + + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + memset(res, 0, sizeof(res)); + + if (desc->start != -1ul && desc->size > 0) { + res[nres].start = desc->start; + res[nres].end = desc->start + desc->size - 1; + res[nres].flags = IORESOURCE_MEM; + nres++; + } + + if (desc->irq != NO_IRQ) { + res[nres].start = desc->irq; + res[nres].end = desc->irq; + res[nres].flags = IORESOURCE_IRQ; + nres++; + } + + for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) { + if (desc->dma[i] == 0) + break; + + res[nres].start = desc->dma[i]; + res[nres].end = desc->dma[i]; + res[nres].flags = IORESOURCE_DMA; + } + + ret = platform_device_add_resources(pdev, res, nres); + if (ret) { + platform_device_put(pdev); + return ret; + } + + if (data && size) { + ret = platform_device_add_data(pdev, data, size); + if (ret) { + platform_device_put(pdev); + return ret; + } + } + + return platform_device_add(pdev); +} diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h new file mode 100644 index 00000000000..3254089a644 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/addr-map.h @@ -0,0 +1,34 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/addr-map.h + * + * Common address map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_ADDR_MAP_H +#define __ASM_MACH_ADDR_MAP_H + +/* APB - Application Subsystem Peripheral Bus + * + * NOTE: the DMA controller registers are actually on the AXI fabric #1 + * slave port to AHB/APB bridge, due to its close relationship to those + * peripherals on APB, let's count it into the ABP mapping area. + */ +#define APB_PHYS_BASE 0xd4000000 +#define APB_VIRT_BASE 0xfe000000 +#define APB_PHYS_SIZE 0x00200000 + +#define AXI_PHYS_BASE 0xd4200000 +#define AXI_VIRT_BASE 0xfe200000 +#define AXI_PHYS_SIZE 0x00200000 + +/* Static Memory Controller - Chip Select 0 and 1 */ +#define SMC_CS0_PHYS_BASE 0x80000000 +#define SMC_CS0_PHYS_SIZE 0x10000000 +#define SMC_CS1_PHYS_BASE 0x90000000 +#define SMC_CS1_PHYS_SIZE 0x10000000 + +#endif /* __ASM_MACH_ADDR_MAP_H */ diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h new file mode 100644 index 00000000000..2fb354e54e0 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif /* __ASM_MACH_CLKDEV_H */ diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h new file mode 100644 index 00000000000..25e797b0908 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/cputype.h @@ -0,0 +1,30 @@ +#ifndef __ASM_MACH_CPUTYPE_H +#define __ASM_MACH_CPUTYPE_H + +#include <asm/cputype.h> + +/* + * CPU Stepping OLD_ID CPU_ID CHIP_ID + * + * PXA168 A0 0x41159263 0x56158400 0x00A0A333 + * PXA910 Y0 0x41159262 0x56158000 0x00F0C910 + */ + +#ifdef CONFIG_CPU_PXA168 +# define __cpu_is_pxa168(id) \ + ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; }) +#else +# define __cpu_is_pxa168(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA910 +# define __cpu_is_pxa910(id) \ + ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; }) +#else +# define __cpu_is_pxa910(id) (0) +#endif + +#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); }) +#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); }) + +#endif /* __ASM_MACH_CPUTYPE_H */ diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S new file mode 100644 index 00000000000..a850f87de51 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -0,0 +1,23 @@ +/* arch/arm/mach-mmp/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copied from arch/arm/mach-pxa/include/mach/debug.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/addr-map.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =APB_PHYS_BASE @ physical + ldrne \rx, =APB_VIRT_BASE @ virtual + orr \rx, \rx, #0x00017000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h new file mode 100644 index 00000000000..24585397217 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/devices.h @@ -0,0 +1,37 @@ +#include <linux/types.h> + +#define MAX_RESOURCE_DMA 2 + +/* structure for describing the on-chip devices */ +struct pxa_device_desc { + const char *dev_name; + const char *drv_name; + int id; + int irq; + unsigned long start; + unsigned long size; + int dma[MAX_RESOURCE_DMA]; +}; + +#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \ +struct pxa_device_desc pxa168_device_##_name __initdata = { \ + .dev_name = "pxa168-" #_name, \ + .drv_name = _drv, \ + .id = _id, \ + .irq = IRQ_PXA168_##_irq, \ + .start = _start, \ + .size = _size, \ + .dma = { _dma }, \ +}; + +#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \ +struct pxa_device_desc pxa910_device_##_name __initdata = { \ + .dev_name = "pxa910-" #_name, \ + .drv_name = _drv, \ + .id = _id, \ + .irq = IRQ_PXA910_##_irq, \ + .start = _start, \ + .size = _size, \ + .dma = { _dma }, \ +}; +extern int pxa_register_device(struct pxa_device_desc *, void *, size_t); diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h new file mode 100644 index 00000000000..1d6914544da --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/dma.h @@ -0,0 +1,13 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/dma.h + */ + +#ifndef __ASM_MACH_DMA_H +#define __ASM_MACH_DMA_H + +#include <mach/addr-map.h> + +#define DMAC_REGS_VIRT (APB_VIRT_BASE + 0x00000) + +#include <plat/dma.h> +#endif /* __ASM_MACH_DMA_H */ diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S new file mode 100644 index 00000000000..6d3cd35478b --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/entry-macro.S @@ -0,0 +1,25 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/entry-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/regs-icu.h> + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =ICU_AP_IRQ_SEL_INT_NUM + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \tmp, [\base, #0] + and \irqnr, \tmp, #0x3f + tst \tmp, #(1 << 6) + .endm diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h new file mode 100644 index 00000000000..ab26d13295c --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -0,0 +1,36 @@ +#ifndef __ASM_MACH_GPIO_H +#define __ASM_MACH_GPIO_H + +#include <mach/addr-map.h> +#include <mach/irqs.h> +#include <asm-generic/gpio.h> + +#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) + +#define NR_BUILTIN_GPIO (128) + +#define gpio_to_bank(gpio) ((gpio) >> 5) +#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) +#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START) + + +#define __gpio_is_inverted(gpio) (0) +#define __gpio_is_occupied(gpio) (0) + +/* NOTE: these macros are defined here to make optimization of + * gpio_{get,set}_value() to work when 'gpio' is a constant. + * Usage of these macros otherwise is no longer recommended, + * use generic GPIO API whenever possible. + */ +#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) + +#include <plat/gpio.h> +#endif /* __ASM_MACH_GPIO_H */ diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h new file mode 100644 index 00000000000..99264a5ce5e --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/hardware.h @@ -0,0 +1,4 @@ +#ifndef __ASM_MACH_HARDWARE_H +#define __ASM_MACH_HARDWARE_H + +#endif /* __ASM_MACH_HARDWARE_H */ diff --git a/arch/arm/mach-mmp/include/mach/io.h b/arch/arm/mach-mmp/include/mach/io.h new file mode 100644 index 00000000000..e7adf3d012c --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/io.h @@ -0,0 +1,21 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/io.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_IO_H +#define __ASM_MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif /* __ASM_MACH_IO_H */ diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h new file mode 100644 index 00000000000..e83e45ebf7a --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -0,0 +1,119 @@ +#ifndef __ASM_MACH_IRQS_H +#define __ASM_MACH_IRQS_H + +/* + * Interrupt numbers for PXA168 + */ +#define IRQ_PXA168_NONE (-1) +#define IRQ_PXA168_SSP3 0 +#define IRQ_PXA168_SSP2 1 +#define IRQ_PXA168_SSP1 2 +#define IRQ_PXA168_SSP0 3 +#define IRQ_PXA168_PMIC_INT 4 +#define IRQ_PXA168_RTC_INT 5 +#define IRQ_PXA168_RTC_ALARM 6 +#define IRQ_PXA168_TWSI0 7 +#define IRQ_PXA168_GPU 8 +#define IRQ_PXA168_KEYPAD 9 +#define IRQ_PXA168_ONEWIRE 12 +#define IRQ_PXA168_TIMER1 13 +#define IRQ_PXA168_TIMER2 14 +#define IRQ_PXA168_TIMER3 15 +#define IRQ_PXA168_CMU 16 +#define IRQ_PXA168_SSP4 17 +#define IRQ_PXA168_MSP_WAKEUP 19 +#define IRQ_PXA168_CF_WAKEUP 20 +#define IRQ_PXA168_XD_WAKEUP 21 +#define IRQ_PXA168_MFU 22 +#define IRQ_PXA168_MSP 23 +#define IRQ_PXA168_CF 24 +#define IRQ_PXA168_XD 25 +#define IRQ_PXA168_DDR_INT 26 +#define IRQ_PXA168_UART1 27 +#define IRQ_PXA168_UART2 28 +#define IRQ_PXA168_WDT 35 +#define IRQ_PXA168_FRQ_CHANGE 38 +#define IRQ_PXA168_SDH1 39 +#define IRQ_PXA168_SDH2 40 +#define IRQ_PXA168_LCD 41 +#define IRQ_PXA168_CI 42 +#define IRQ_PXA168_USB1 44 +#define IRQ_PXA168_NAND 45 +#define IRQ_PXA168_HIFI_DMA 46 +#define IRQ_PXA168_DMA_INT0 47 +#define IRQ_PXA168_DMA_INT1 48 +#define IRQ_PXA168_GPIOX 49 +#define IRQ_PXA168_USB2 51 +#define IRQ_PXA168_AC97 57 +#define IRQ_PXA168_TWSI1 58 +#define IRQ_PXA168_PMU 60 +#define IRQ_PXA168_SM_INT 63 + +/* + * Interrupt numbers for PXA910 + */ +#define IRQ_PXA910_AIRQ 0 +#define IRQ_PXA910_SSP3 1 +#define IRQ_PXA910_SSP2 2 +#define IRQ_PXA910_SSP1 3 +#define IRQ_PXA910_PMIC_INT 4 +#define IRQ_PXA910_RTC_INT 5 +#define IRQ_PXA910_RTC_ALARM 6 +#define IRQ_PXA910_TWSI0 7 +#define IRQ_PXA910_GPU 8 +#define IRQ_PXA910_KEYPAD 9 +#define IRQ_PXA910_ROTARY 10 +#define IRQ_PXA910_TRACKBALL 11 +#define IRQ_PXA910_ONEWIRE 12 +#define IRQ_PXA910_AP1_TIMER1 13 +#define IRQ_PXA910_AP1_TIMER2 14 +#define IRQ_PXA910_AP1_TIMER3 15 +#define IRQ_PXA910_IPC_AP0 16 +#define IRQ_PXA910_IPC_AP1 17 +#define IRQ_PXA910_IPC_AP2 18 +#define IRQ_PXA910_IPC_AP3 19 +#define IRQ_PXA910_IPC_AP4 20 +#define IRQ_PXA910_IPC_CP0 21 +#define IRQ_PXA910_IPC_CP1 22 +#define IRQ_PXA910_IPC_CP2 23 +#define IRQ_PXA910_IPC_CP3 24 +#define IRQ_PXA910_IPC_CP4 25 +#define IRQ_PXA910_L2_DDR 26 +#define IRQ_PXA910_UART2 27 +#define IRQ_PXA910_UART3 28 +#define IRQ_PXA910_AP2_TIMER1 29 +#define IRQ_PXA910_AP2_TIMER2 30 +#define IRQ_PXA910_CP2_TIMER1 31 +#define IRQ_PXA910_CP2_TIMER2 32 +#define IRQ_PXA910_CP2_TIMER3 33 +#define IRQ_PXA910_GSSP 34 +#define IRQ_PXA910_CP2_WDT 35 +#define IRQ_PXA910_MAIN_PMU 36 +#define IRQ_PXA910_CP_FREQ_CHG 37 +#define IRQ_PXA910_AP_FREQ_CHG 38 +#define IRQ_PXA910_MMC 39 +#define IRQ_PXA910_AEU 40 +#define IRQ_PXA910_LCD 41 +#define IRQ_PXA910_CCIC 42 +#define IRQ_PXA910_IRE 43 +#define IRQ_PXA910_USB1 44 +#define IRQ_PXA910_NAND 45 +#define IRQ_PXA910_HIFI_DMA 46 +#define IRQ_PXA910_DMA_INT0 47 +#define IRQ_PXA910_DMA_INT1 48 +#define IRQ_PXA910_AP_GPIO 49 +#define IRQ_PXA910_AP2_TIMER3 50 +#define IRQ_PXA910_USB2 51 +#define IRQ_PXA910_TWSI1 54 +#define IRQ_PXA910_CP_GPIO 55 +#define IRQ_PXA910_UART1 59 /* Slow UART */ +#define IRQ_PXA910_AP_PMU 60 +#define IRQ_PXA910_SM_INT 63 /* from PinMux */ + +#define IRQ_GPIO_START 64 +#define IRQ_GPIO_NUM 128 +#define IRQ_GPIO(x) (IRQ_GPIO_START + (x)) + +#define NR_IRQS (IRQ_GPIO_START + IRQ_GPIO_NUM) + +#endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h new file mode 100644 index 00000000000..bdb21d70714 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/memory.h @@ -0,0 +1,14 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/memory.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_MEMORY_H +#define __ASM_MACH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h new file mode 100644 index 00000000000..d0bdb6e3682 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -0,0 +1,258 @@ +#ifndef __ASM_MACH_MFP_PXA168_H +#define __ASM_MACH_MFP_PXA168_H + +#include <mach/mfp.h> + +/* GPIO */ +#define GPIO0_GPIO MFP_CFG(GPIO0, AF5) +#define GPIO1_GPIO MFP_CFG(GPIO1, AF5) +#define GPIO2_GPIO MFP_CFG(GPIO2, AF5) +#define GPIO3_GPIO MFP_CFG(GPIO3, AF5) +#define GPIO4_GPIO MFP_CFG(GPIO4, AF5) +#define GPIO5_GPIO MFP_CFG(GPIO5, AF5) +#define GPIO6_GPIO MFP_CFG(GPIO6, AF5) +#define GPIO7_GPIO MFP_CFG(GPIO7, AF5) +#define GPIO8_GPIO MFP_CFG(GPIO8, AF5) +#define GPIO9_GPIO MFP_CFG(GPIO9, AF5) +#define GPIO10_GPIO MFP_CFG(GPIO10, AF5) +#define GPIO11_GPIO MFP_CFG(GPIO11, AF5) +#define GPIO12_GPIO MFP_CFG(GPIO12, AF5) +#define GPIO13_GPIO MFP_CFG(GPIO13, AF5) +#define GPIO14_GPIO MFP_CFG(GPIO14, AF5) +#define GPIO15_GPIO MFP_CFG(GPIO15, AF5) +#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG(GPIO17, AF5) +#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG(GPIO19, AF5) +#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG(GPIO21, AF5) +#define GPIO22_GPIO MFP_CFG(GPIO22, AF5) +#define GPIO23_GPIO MFP_CFG(GPIO23, AF5) +#define GPIO24_GPIO MFP_CFG(GPIO24, AF5) +#define GPIO25_GPIO MFP_CFG(GPIO25, AF5) +#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG(GPIO27, AF5) +#define GPIO28_GPIO MFP_CFG(GPIO28, AF5) +#define GPIO29_GPIO MFP_CFG(GPIO29, AF5) +#define GPIO30_GPIO MFP_CFG(GPIO30, AF5) +#define GPIO31_GPIO MFP_CFG(GPIO31, AF5) +#define GPIO32_GPIO MFP_CFG(GPIO32, AF5) +#define GPIO33_GPIO MFP_CFG(GPIO33, AF5) +#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) +#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) +#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) +#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) +#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) +#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) +#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) +#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) + +/* DFI */ +#define GPIO0_DFI_D15 MFP_CFG(GPIO0, AF0) +#define GPIO1_DFI_D14 MFP_CFG(GPIO1, AF0) +#define GPIO2_DFI_D13 MFP_CFG(GPIO2, AF0) +#define GPIO3_DFI_D12 MFP_CFG(GPIO3, AF0) +#define GPIO4_DFI_D11 MFP_CFG(GPIO4, AF0) +#define GPIO5_DFI_D10 MFP_CFG(GPIO5, AF0) +#define GPIO6_DFI_D9 MFP_CFG(GPIO6, AF0) +#define GPIO7_DFI_D8 MFP_CFG(GPIO7, AF0) +#define GPIO8_DFI_D7 MFP_CFG(GPIO8, AF0) +#define GPIO9_DFI_D6 MFP_CFG(GPIO9, AF0) +#define GPIO10_DFI_D5 MFP_CFG(GPIO10, AF0) +#define GPIO11_DFI_D4 MFP_CFG(GPIO11, AF0) +#define GPIO12_DFI_D3 MFP_CFG(GPIO12, AF0) +#define GPIO13_DFI_D2 MFP_CFG(GPIO13, AF0) +#define GPIO14_DFI_D1 MFP_CFG(GPIO14, AF0) +#define GPIO15_DFI_D0 MFP_CFG(GPIO15, AF0) + +#define GPIO30_DFI_ADDR0 MFP_CFG(GPIO30, AF0) +#define GPIO31_DFI_ADDR1 MFP_CFG(GPIO31, AF0) +#define GPIO32_DFI_ADDR2 MFP_CFG(GPIO32, AF0) +#define GPIO33_DFI_ADDR3 MFP_CFG(GPIO33, AF0) + +/* NAND */ +#define GPIO16_ND_nCS0 MFP_CFG(GPIO16, AF1) +#define GPIO17_ND_nWE MFP_CFG(GPIO17, AF0) +#define GPIO21_ND_ALE MFP_CFG(GPIO21, AF0) +#define GPIO22_ND_CLE MFP_CFG(GPIO22, AF0) +#define GPIO24_ND_nRE MFP_CFG(GPIO24, AF0) +#define GPIO26_ND_RnB1 MFP_CFG(GPIO26, AF1) +#define GPIO27_ND_RnB2 MFP_CFG(GPIO27, AF1) + +/* Static Memory Controller */ +#define GPIO18_SMC_nCS0 MFP_CFG(GPIO18, AF3) +#define GPIO18_SMC_nCS1 MFP_CFG(GPIO18, AF2) +#define GPIO16_SMC_nCS0 MFP_CFG(GPIO16, AF2) +#define GPIO16_SMC_nCS1 MFP_CFG(GPIO16, AF3) +#define GPIO19_SMC_nCS0 MFP_CFG(GPIO19, AF0) +#define GPIO20_SMC_nCS1 MFP_CFG(GPIO20, AF2) +#define GPIO23_SMC_nLUA MFP_CFG(GPIO23, AF0) +#define GPIO25_SMC_nLLA MFP_CFG(GPIO25, AF0) +#define GPIO27_SMC_IRQ MFP_CFG(GPIO27, AF0) +#define GPIO28_SMC_RDY MFP_CFG(GPIO28, AF0) +#define GPIO29_SMC_SCLK MFP_CFG(GPIO29, AF0) +#define GPIO34_SMC_nCS1 MFP_CFG(GPIO34, AF2) +#define GPIO35_SMC_BE1 MFP_CFG(GPIO35, AF2) +#define GPIO36_SMC_BE2 MFP_CFG(GPIO36, AF2) + +/* Compact Flash */ +#define GPIO19_CF_nCE1 MFP_CFG(GPIO19, AF3) +#define GPIO20_CF_nCE2 MFP_CFG(GPIO20, AF3) +#define GPIO23_CF_nALE MFP_CFG(GPIO23, AF3) +#define GPIO25_CF_nRESET MFP_CFG(GPIO25, AF3) +#define GPIO28_CF_RDY MFP_CFG(GPIO28, AF3) +#define GPIO29_CF_STSCH MFP_CFG(GPIO29, AF3) +#define GPIO30_CF_nREG MFP_CFG(GPIO30, AF3) +#define GPIO31_CF_nIOIS16 MFP_CFG(GPIO31, AF3) +#define GPIO32_CF_nCD1 MFP_CFG(GPIO32, AF3) +#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) + +/* UART1 */ +#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) +#define GPIO107_UART1_RXD MFP_CFG_DRV(GPIO107, AF2, FAST) +#define GPIO108_UART1_RXD MFP_CFG_DRV(GPIO108, AF1, FAST) +#define GPIO108_UART1_TXD MFP_CFG_DRV(GPIO108, AF2, FAST) +#define GPIO109_UART1_CTS MFP_CFG(GPIO109, AF1) +#define GPIO109_UART1_RTS MFP_CFG(GPIO109, AF2) +#define GPIO110_UART1_RTS MFP_CFG(GPIO110, AF1) +#define GPIO110_UART1_CTS MFP_CFG(GPIO110, AF2) +#define GPIO111_UART1_RI MFP_CFG(GPIO111, AF1) +#define GPIO111_UART1_DSR MFP_CFG(GPIO111, AF2) +#define GPIO112_UART1_DTR MFP_CFG(GPIO111, AF1) +#define GPIO112_UART1_DCD MFP_CFG(GPIO112, AF2) + +/* MMC1 */ +#define GPIO37_MMC1_DAT7 MFP_CFG(GPIO37, AF1) +#define GPIO38_MMC1_DAT6 MFP_CFG(GPIO38, AF1) +#define GPIO54_MMC1_DAT5 MFP_CFG(GPIO54, AF1) +#define GPIO48_MMC1_DAT4 MFP_CFG(GPIO48, AF1) +#define GPIO51_MMC1_DAT3 MFP_CFG(GPIO51, AF1) +#define GPIO52_MMC1_DAT2 MFP_CFG(GPIO52, AF1) +#define GPIO40_MMC1_DAT1 MFP_CFG(GPIO40, AF1) +#define GPIO41_MMC1_DAT0 MFP_CFG(GPIO41, AF1) +#define GPIO49_MMC1_CMD MFP_CFG(GPIO49, AF1) +#define GPIO43_MMC1_CLK MFP_CFG(GPIO43, AF1) +#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1) +#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1) + +/* LCD */ +#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1) +#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1) +#define GPIO61_LCD_DD1 MFP_CFG(GPIO61, AF1) +#define GPIO70_LCD_DD10 MFP_CFG(GPIO70, AF1) +#define GPIO71_LCD_DD11 MFP_CFG(GPIO71, AF1) +#define GPIO72_LCD_DD12 MFP_CFG(GPIO72, AF1) +#define GPIO73_LCD_DD13 MFP_CFG(GPIO73, AF1) +#define GPIO74_LCD_DD14 MFP_CFG(GPIO74, AF1) +#define GPIO75_LCD_DD15 MFP_CFG(GPIO75, AF1) +#define GPIO76_LCD_DD16 MFP_CFG(GPIO76, AF1) +#define GPIO77_LCD_DD17 MFP_CFG(GPIO77, AF1) +#define GPIO78_LCD_DD18 MFP_CFG(GPIO78, AF1) +#define GPIO79_LCD_DD19 MFP_CFG(GPIO79, AF1) +#define GPIO62_LCD_DD2 MFP_CFG(GPIO62, AF1) +#define GPIO80_LCD_DD20 MFP_CFG(GPIO80, AF1) +#define GPIO81_LCD_DD21 MFP_CFG(GPIO81, AF1) +#define GPIO82_LCD_DD22 MFP_CFG(GPIO82, AF1) +#define GPIO83_LCD_DD23 MFP_CFG(GPIO83, AF1) +#define GPIO63_LCD_DD3 MFP_CFG(GPIO63, AF1) +#define GPIO64_LCD_DD4 MFP_CFG(GPIO64, AF1) +#define GPIO65_LCD_DD5 MFP_CFG(GPIO65, AF1) +#define GPIO66_LCD_DD6 MFP_CFG(GPIO66, AF1) +#define GPIO67_LCD_DD7 MFP_CFG(GPIO67, AF1) +#define GPIO68_LCD_DD8 MFP_CFG(GPIO68, AF1) +#define GPIO69_LCD_DD9 MFP_CFG(GPIO69, AF1) +#define GPIO59_LCD_DENA_BIAS MFP_CFG(GPIO59, AF1) +#define GPIO56_LCD_FCLK_RD MFP_CFG(GPIO56, AF1) +#define GPIO57_LCD_LCLK_A0 MFP_CFG(GPIO57, AF1) +#define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1) +#define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1) + +/* I2S */ +#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) +#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) +#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1) +#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) +#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) + +#endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h new file mode 100644 index 00000000000..48a1cbc7c56 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -0,0 +1,157 @@ +#ifndef __ASM_MACH_MFP_PXA910_H +#define __ASM_MACH_MFP_PXA910_H + +#include <mach/mfp.h> + +/* UART2 */ +#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6) +#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6) + +/* UART3 */ +#define GPIO31_UART3_RXD MFP_CFG(GPIO31, AF4) +#define GPIO32_UART3_TXD MFP_CFG(GPIO32, AF4) + +/*IRDA*/ +#define GPIO51_IRDA_SHDN MFP_CFG(GPIO51, AF0) + +/* SMC */ +#define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0) +#define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0) +#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0) +#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0) +#define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1) +#define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1) + +/* I2C */ +#define GPIO53_CI2C_SCL MFP_CFG(GPIO53, AF2) +#define GPIO54_CI2C_SDA MFP_CFG(GPIO54, AF2) + +/* SSP1 (I2S) */ +#define GPIO24_SSP1_SDATA_IN MFP_CFG_DRV(GPIO24, AF1, MEDIUM) +#define GPIO21_SSP1_BITCLK MFP_CFG_DRV(GPIO21, AF1, MEDIUM) +#define GPIO20_SSP1_SYSCLK MFP_CFG_DRV(GPIO20, AF1, MEDIUM) +#define GPIO22_SSP1_SYNC MFP_CFG_DRV(GPIO22, AF1, MEDIUM) +#define GPIO23_SSP1_DATA_OUT MFP_CFG_DRV(GPIO23, AF1, MEDIUM) +#define GPIO124_MN_CLK_OUT MFP_CFG_DRV(GPIO124, AF1, MEDIUM) +#define GPIO123_CLK_REQ MFP_CFG_DRV(GPIO123, AF0, MEDIUM) + +/* DFI */ +#define DF_IO0_ND_IO0 MFP_CFG(DF_IO0, AF0) +#define DF_IO1_ND_IO1 MFP_CFG(DF_IO1, AF0) +#define DF_IO2_ND_IO2 MFP_CFG(DF_IO2, AF0) +#define DF_IO3_ND_IO3 MFP_CFG(DF_IO3, AF0) +#define DF_IO4_ND_IO4 MFP_CFG(DF_IO4, AF0) +#define DF_IO5_ND_IO5 MFP_CFG(DF_IO5, AF0) +#define DF_IO6_ND_IO6 MFP_CFG(DF_IO6, AF0) +#define DF_IO7_ND_IO7 MFP_CFG(DF_IO7, AF0) +#define DF_IO8_ND_IO8 MFP_CFG(DF_IO8, AF0) +#define DF_IO9_ND_IO9 MFP_CFG(DF_IO9, AF0) +#define DF_IO10_ND_IO10 MFP_CFG(DF_IO10, AF0) +#define DF_IO11_ND_IO11 MFP_CFG(DF_IO11, AF0) +#define DF_IO12_ND_IO12 MFP_CFG(DF_IO12, AF0) +#define DF_IO13_ND_IO13 MFP_CFG(DF_IO13, AF0) +#define DF_IO14_ND_IO14 MFP_CFG(DF_IO14, AF0) +#define DF_IO15_ND_IO15 MFP_CFG(DF_IO15, AF0) +#define DF_nCS0_SM_nCS2_nCS0 MFP_CFG(DF_nCS0_SM_nCS2, AF0) +#define DF_ALE_SM_WEn_ND_ALE MFP_CFG(DF_ALE_SM_WEn, AF1) +#define DF_CLE_SM_OEn_ND_CLE MFP_CFG(DF_CLE_SM_OEn, AF0) +#define DF_WEn_DF_WEn MFP_CFG(DF_WEn, AF1) +#define DF_REn_DF_REn MFP_CFG(DF_REn, AF1) +#define DF_RDY0_DF_RDY0 MFP_CFG(DF_RDY0, AF0) + +/*keypad*/ +#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1) +#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1) +#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1) +#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1) +#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1) +#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1) +#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1) +#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1) +#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1) +#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1) +#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1) +#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1) +#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1) +#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1) +#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1) +#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1) +#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1) +#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1) +#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1) +#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1) + +/* LCD */ +#define GPIO81_LCD_FCLK MFP_CFG(GPIO81, AF1) +#define GPIO82_LCD_LCLK MFP_CFG(GPIO82, AF1) +#define GPIO83_LCD_PCLK MFP_CFG(GPIO83, AF1) +#define GPIO84_LCD_DENA MFP_CFG(GPIO84, AF1) +#define GPIO85_LCD_DD0 MFP_CFG(GPIO85, AF1) +#define GPIO86_LCD_DD1 MFP_CFG(GPIO86, AF1) +#define GPIO87_LCD_DD2 MFP_CFG(GPIO87, AF1) +#define GPIO88_LCD_DD3 MFP_CFG(GPIO88, AF1) +#define GPIO89_LCD_DD4 MFP_CFG(GPIO89, AF1) +#define GPIO90_LCD_DD5 MFP_CFG(GPIO90, AF1) +#define GPIO91_LCD_DD6 MFP_CFG(GPIO91, AF1) +#define GPIO92_LCD_DD7 MFP_CFG(GPIO92, AF1) +#define GPIO93_LCD_DD8 MFP_CFG(GPIO93, AF1) +#define GPIO94_LCD_DD9 MFP_CFG(GPIO94, AF1) +#define GPIO95_LCD_DD10 MFP_CFG(GPIO95, AF1) +#define GPIO96_LCD_DD11 MFP_CFG(GPIO96, AF1) +#define GPIO97_LCD_DD12 MFP_CFG(GPIO97, AF1) +#define GPIO98_LCD_DD13 MFP_CFG(GPIO98, AF1) +#define GPIO100_LCD_DD14 MFP_CFG(GPIO100, AF1) +#define GPIO101_LCD_DD15 MFP_CFG(GPIO101, AF1) +#define GPIO102_LCD_DD16 MFP_CFG(GPIO102, AF1) +#define GPIO103_LCD_DD17 MFP_CFG(GPIO103, AF1) +#define GPIO104_LCD_DD18 MFP_CFG(GPIO104, AF1) +#define GPIO105_LCD_DD19 MFP_CFG(GPIO105, AF1) +#define GPIO106_LCD_DD20 MFP_CFG(GPIO106, AF1) +#define GPIO107_LCD_DD21 MFP_CFG(GPIO107, AF1) +#define GPIO108_LCD_DD22 MFP_CFG(GPIO108, AF1) +#define GPIO109_LCD_DD23 MFP_CFG(GPIO109, AF1) + +#define GPIO104_LCD_SPIDOUT MFP_CFG(GPIO104, AF3) +#define GPIO105_LCD_SPIDIN MFP_CFG(GPIO105, AF3) +#define GPIO107_LCD_CS1 MFP_CFG(GPIO107, AF3) +#define GPIO108_LCD_DCLK MFP_CFG(GPIO108, AF3) + +#define GPIO106_LCD_RESET MFP_CFG(GPIO106, AF0) + +/*smart panel*/ +#define GPIO82_LCD_A0 MFP_CFG(GPIO82, AF0) +#define GPIO83_LCD_WR MFP_CFG(GPIO83, AF0) +#define GPIO103_LCD_CS MFP_CFG(GPIO103, AF0) + +/*1wire*/ +#define GPIO106_1WIRE MFP_CFG(GPIO106, AF3) + +/*CCIC*/ +#define GPIO67_CCIC_IN7 MFP_CFG_DRV(GPIO67, AF1, MEDIUM) +#define GPIO68_CCIC_IN6 MFP_CFG_DRV(GPIO68, AF1, MEDIUM) +#define GPIO69_CCIC_IN5 MFP_CFG_DRV(GPIO69, AF1, MEDIUM) +#define GPIO70_CCIC_IN4 MFP_CFG_DRV(GPIO70, AF1, MEDIUM) +#define GPIO71_CCIC_IN3 MFP_CFG_DRV(GPIO71, AF1, MEDIUM) +#define GPIO72_CCIC_IN2 MFP_CFG_DRV(GPIO72, AF1, MEDIUM) +#define GPIO73_CCIC_IN1 MFP_CFG_DRV(GPIO73, AF1, MEDIUM) +#define GPIO74_CCIC_IN0 MFP_CFG_DRV(GPIO74, AF1, MEDIUM) +#define GPIO75_CAM_HSYNC MFP_CFG_DRV(GPIO75, AF1, MEDIUM) +#define GPIO76_CAM_VSYNC MFP_CFG_DRV(GPIO76, AF1, MEDIUM) +#define GPIO77_CAM_MCLK MFP_CFG_DRV(GPIO77, AF1, MEDIUM) +#define GPIO78_CAM_PCLK MFP_CFG_DRV(GPIO78, AF1, MEDIUM) + +/* MMC1 */ +#define MMC1_DAT7_MMC1_DAT7 MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM) +#define MMC1_DAT6_MMC1_DAT6 MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM) +#define MMC1_DAT5_MMC1_DAT5 MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM) +#define MMC1_DAT4_MMC1_DAT4 MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM) +#define MMC1_DAT3_MMC1_DAT3 MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM) +#define MMC1_DAT2_MMC1_DAT2 MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM) +#define MMC1_DAT1_MMC1_DAT1 MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM) +#define MMC1_DAT0_MMC1_DAT0 MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM) +#define MMC1_CMD_MMC1_CMD MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM) +#define MMC1_CLK_MMC1_CLK MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM) +#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM) +#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM) + +#endif /* __ASM_MACH MFP_PXA910_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h new file mode 100644 index 00000000000..277ea4cd0f9 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/mfp.h @@ -0,0 +1,37 @@ +#ifndef __ASM_MACH_MFP_H +#define __ASM_MACH_MFP_H + +#include <plat/mfp.h> + +/* + * NOTE: the MFPR register bit definitions on PXA168 processor lines are a + * bit different from those on PXA3xx. Bit [7:10] are now reserved, which + * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits. + * + * To cope with this difference and re-use the pxa3xx mfp code as much as + * possible, we make the following compromise: + * + * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT) + * 2. DRIVE strength definitions redefined to include the reserved bit10 + * 3. Override MFP_CFG() and MFP_CFG_DRV() + * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X() + */ + +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + +#undef MFP_CFG +#undef MFP_CFG_DRV +#undef MFP_CFG_LPM +#undef MFP_CFG_X +#undef MFP_CFG_DEFAULT + +#define MFP_CFG(pin, af) \ + (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM) + +#define MFP_CFG_DRV(pin, af, drv) \ + (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv) + +#endif /* __ASM_MACH_MFP_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h new file mode 100644 index 00000000000..ef0a8a2076e --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_PXA168_H +#define __ASM_MACH_PXA168_H + +#include <mach/devices.h> + +extern struct pxa_device_desc pxa168_device_uart1; +extern struct pxa_device_desc pxa168_device_uart2; + +static inline int pxa168_add_uart(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa168_device_uart1; break; + case 2: d = &pxa168_device_uart2; break; + } + + if (d == NULL) + return -EINVAL; + + return pxa_register_device(d, NULL, 0); +} +#endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h new file mode 100644 index 00000000000..b7aeaf574c3 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_PXA910_H +#define __ASM_MACH_PXA910_H + +#include <mach/devices.h> + +extern struct pxa_device_desc pxa910_device_uart1; +extern struct pxa_device_desc pxa910_device_uart2; + +static inline int pxa910_add_uart(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa910_device_uart1; break; + case 2: d = &pxa910_device_uart2; break; + } + + if (d == NULL) + return -EINVAL; + + return pxa_register_device(d, NULL, 0); +} +#endif /* __ASM_MACH_PXA910_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h new file mode 100644 index 00000000000..c6b8c9dc202 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -0,0 +1,78 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h + * + * Application Peripheral Bus Clock Unit + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_REGS_APBC_H +#define __ASM_MACH_REGS_APBC_H + +#include <mach/addr-map.h> + +#define APBC_VIRT_BASE (APB_VIRT_BASE + 0x015000) +#define APBC_REG(x) (APBC_VIRT_BASE + (x)) + +/* + * APB clock register offsets for PXA168 + */ +#define APBC_PXA168_UART1 APBC_REG(0x000) +#define APBC_PXA168_UART2 APBC_REG(0x004) +#define APBC_PXA168_GPIO APBC_REG(0x008) +#define APBC_PXA168_PWM0 APBC_REG(0x00c) +#define APBC_PXA168_PWM1 APBC_REG(0x010) +#define APBC_PXA168_SSP1 APBC_REG(0x01c) +#define APBC_PXA168_SSP2 APBC_REG(0x020) +#define APBC_PXA168_RTC APBC_REG(0x028) +#define APBC_PXA168_TWSI0 APBC_REG(0x02c) +#define APBC_PXA168_KPC APBC_REG(0x030) +#define APBC_PXA168_TIMERS APBC_REG(0x034) +#define APBC_PXA168_AIB APBC_REG(0x03c) +#define APBC_PXA168_SW_JTAG APBC_REG(0x040) +#define APBC_PXA168_ONEWIRE APBC_REG(0x048) +#define APBC_PXA168_SSP3 APBC_REG(0x04c) +#define APBC_PXA168_ASFAR APBC_REG(0x050) +#define APBC_PXA168_ASSAR APBC_REG(0x054) +#define APBC_PXA168_SSP4 APBC_REG(0x058) +#define APBC_PXA168_SSP5 APBC_REG(0x05c) +#define APBC_PXA168_TWSI1 APBC_REG(0x06c) +#define APBC_PXA168_UART3 APBC_REG(0x070) +#define APBC_PXA168_AC97 APBC_REG(0x084) + +/* + * APB Clock register offsets for PXA910 + */ +#define APBC_PXA910_UART0 APBC_REG(0x000) +#define APBC_PXA910_UART1 APBC_REG(0x004) +#define APBC_PXA910_GPIO APBC_REG(0x008) +#define APBC_PXA910_PWM0 APBC_REG(0x00c) +#define APBC_PXA910_PWM1 APBC_REG(0x010) +#define APBC_PXA910_PWM2 APBC_REG(0x014) +#define APBC_PXA910_PWM3 APBC_REG(0x018) +#define APBC_PXA910_SSP1 APBC_REG(0x01c) +#define APBC_PXA910_SSP2 APBC_REG(0x020) +#define APBC_PXA910_IPC APBC_REG(0x024) +#define APBC_PXA910_TWSI0 APBC_REG(0x02c) +#define APBC_PXA910_KPC APBC_REG(0x030) +#define APBC_PXA910_TIMERS APBC_REG(0x034) +#define APBC_PXA910_TBROT APBC_REG(0x038) +#define APBC_PXA910_AIB APBC_REG(0x03c) +#define APBC_PXA910_SW_JTAG APBC_REG(0x040) +#define APBC_PXA910_TIMERS1 APBC_REG(0x044) +#define APBC_PXA910_ONEWIRE APBC_REG(0x048) +#define APBC_PXA910_SSP3 APBC_REG(0x04c) +#define APBC_PXA910_ASFAR APBC_REG(0x050) +#define APBC_PXA910_ASSAR APBC_REG(0x054) + +/* Common APB clock register bit definitions */ +#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */ +#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */ +#define APBC_RST (1 << 2) /* Reset Generation */ + +/* Functional Clock Selection Mask */ +#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4) + +#endif /* __ASM_MACH_REGS_APBC_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h new file mode 100644 index 00000000000..91903051412 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h @@ -0,0 +1,36 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h + * + * Application Subsystem Power Management Unit + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_REGS_APMU_H +#define __ASM_MACH_REGS_APMU_H + +#include <mach/addr-map.h> + +#define APMU_VIRT_BASE (AXI_VIRT_BASE + 0x82800) +#define APMU_REG(x) (APMU_VIRT_BASE + (x)) + +/* Clock Reset Control */ +#define APMU_IRE APMU_REG(0x048) +#define APMU_LCD APMU_REG(0x04c) +#define APMU_CCIC APMU_REG(0x050) +#define APMU_SDH0 APMU_REG(0x054) +#define APMU_SDH1 APMU_REG(0x058) +#define APMU_USB APMU_REG(0x05c) +#define APMU_NAND APMU_REG(0x060) +#define APMU_DMA APMU_REG(0x064) +#define APMU_GEU APMU_REG(0x068) +#define APMU_BUS APMU_REG(0x06c) + +#define APMU_FNCLK_EN (1 << 4) +#define APMU_AXICLK_EN (1 << 3) +#define APMU_FNRST_DIS (1 << 1) +#define APMU_AXIRST_DIS (1 << 0) + +#endif /* __ASM_MACH_REGS_APMU_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h new file mode 100644 index 00000000000..e5f08723e0c --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-icu.h @@ -0,0 +1,31 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/regs-icu.h + * + * Interrupt Control Unit + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_ICU_H +#define __ASM_MACH_ICU_H + +#include <mach/addr-map.h> + +#define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000) +#define ICU_REG(x) (ICU_VIRT_BASE + (x)) + +#define ICU_INT_CONF(n) ICU_REG((n) << 2) +#define ICU_INT_CONF_AP_INT (1 << 6) +#define ICU_INT_CONF_CP_INT (1 << 5) +#define ICU_INT_CONF_IRQ (1 << 4) +#define ICU_INT_CONF_MASK (0xf) + +#define ICU_AP_FIQ_SEL_INT_NUM ICU_REG(0x108) /* AP FIQ Selected Interrupt */ +#define ICU_AP_IRQ_SEL_INT_NUM ICU_REG(0x10C) /* AP IRQ Selected Interrupt */ +#define ICU_AP_GBL_IRQ_MSK ICU_REG(0x114) /* AP Global Interrupt Mask */ +#define ICU_INT_STATUS_0 ICU_REG(0x128) /* Interrupt Stuats 0 */ +#define ICU_INT_STATUS_1 ICU_REG(0x12C) /* Interrupt Status 1 */ + +#endif /* __ASM_MACH_ICU_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/include/mach/regs-timers.h new file mode 100644 index 00000000000..45589fec9fc --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-timers.h @@ -0,0 +1,44 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/regs-timers.h + * + * Timers Module + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_REGS_TIMERS_H +#define __ASM_MACH_REGS_TIMERS_H + +#include <mach/addr-map.h> + +#define TIMERS1_VIRT_BASE (APB_VIRT_BASE + 0x14000) +#define TIMERS2_VIRT_BASE (APB_VIRT_BASE + 0x16000) + +#define TMR_CCR (0x0000) +#define TMR_TN_MM(n, m) (0x0004 + ((n) << 3) + (((n) + (m)) << 2)) +#define TMR_CR(n) (0x0028 + ((n) << 2)) +#define TMR_SR(n) (0x0034 + ((n) << 2)) +#define TMR_IER(n) (0x0040 + ((n) << 2)) +#define TMR_PLVR(n) (0x004c + ((n) << 2)) +#define TMR_PLCR(n) (0x0058 + ((n) << 2)) +#define TMR_WMER (0x0064) +#define TMR_WMR (0x0068) +#define TMR_WVR (0x006c) +#define TMR_WSR (0x0070) +#define TMR_ICR(n) (0x0074 + ((n) << 2)) +#define TMR_WICR (0x0080) +#define TMR_CER (0x0084) +#define TMR_CMR (0x0088) +#define TMR_ILR(n) (0x008c + ((n) << 2)) +#define TMR_WCR (0x0098) +#define TMR_WFAR (0x009c) +#define TMR_WSAR (0x00A0) +#define TMR_CVWR(n) (0x00A4 + ((n) << 2)) + +#define TMR_CCR_CS_0(x) (((x) & 0x3) << 0) +#define TMR_CCR_CS_1(x) (((x) & 0x7) << 2) +#define TMR_CCR_CS_2(x) (((x) & 0x3) << 5) + +#endif /* __ASM_MACH_REGS_TIMERS_H */ diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h new file mode 100644 index 00000000000..001edfefec1 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/system.h @@ -0,0 +1,21 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/system.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_SYSTEM_H +#define __ASM_MACH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + cpu_reset(0); +} +#endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h new file mode 100644 index 00000000000..6cebbd0ca8f --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/timex.h @@ -0,0 +1,9 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/timex.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define CLOCK_TICK_RATE 3250000 diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h new file mode 100644 index 00000000000..c93d5fa5865 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-mmp/include/mach/uncompress.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/serial_reg.h> +#include <mach/addr-map.h> + +#define UART1_BASE (APB_PHYS_BASE + 0x36000) +#define UART2_BASE (APB_PHYS_BASE + 0x17000) +#define UART3_BASE (APB_PHYS_BASE + 0x18000) + +static inline void putc(char c) +{ + volatile unsigned long *UART = (unsigned long *)UART2_BASE; + + /* UART enabled? */ + if (!(UART[UART_IER] & UART_IER_UUE)) + return; + + while (!(UART[UART_LSR] & UART_LSR_THRE)) + barrier(); + + UART[UART_TX] = c; +} + +/* + * This does not append a newline + */ +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h new file mode 100644 index 00000000000..b60ccaf9fee --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/vmalloc.h @@ -0,0 +1,5 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/vmalloc.h + */ + +#define VMALLOC_END 0xfe000000 diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c new file mode 100644 index 00000000000..52ff2f065eb --- /dev/null +++ b/arch/arm/mach-mmp/irq.c @@ -0,0 +1,55 @@ +/* + * linux/arch/arm/mach-mmp/irq.c + * + * Generic IRQ handling, GPIO IRQ demultiplexing, etc. + * + * Author: Bin Yang <bin.yang@marvell.com> + * Created: Sep 30, 2008 + * Copyright: Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/regs-icu.h> + +#include "common.h" + +#define IRQ_ROUTE_TO_AP (ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ) + +#define PRIORITY_DEFAULT 0x1 +#define PRIORITY_NONE 0x0 /* means IRQ disabled */ + +static void icu_mask_irq(unsigned int irq) +{ + __raw_writel(PRIORITY_NONE, ICU_INT_CONF(irq)); +} + +static void icu_unmask_irq(unsigned int irq) +{ + __raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(irq)); +} + +static struct irq_chip icu_irq_chip = { + .name = "icu_irq", + .ack = icu_mask_irq, + .mask = icu_mask_irq, + .unmask = icu_unmask_irq, +}; + +void __init icu_init_irq(void) +{ + int irq; + + for (irq = 0; irq < 64; irq++) { + icu_mask_irq(irq); + set_irq_chip(irq, &icu_irq_chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } +} diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c new file mode 100644 index 00000000000..ae924468658 --- /dev/null +++ b/arch/arm/mach-mmp/pxa168.c @@ -0,0 +1,111 @@ +/* + * linux/arch/arm/mach-mmp/pxa168.c + * + * Code specific to PXA168 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <asm/mach/time.h> +#include <mach/addr-map.h> +#include <mach/cputype.h> +#include <mach/regs-apbc.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/dma.h> +#include <mach/devices.h> +#include <mach/mfp.h> + +#include "common.h" +#include "clock.h" + +#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) + +static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata = +{ + MFP_ADDR_X(GPIO0, GPIO36, 0x04c), + MFP_ADDR_X(GPIO37, GPIO55, 0x000), + MFP_ADDR_X(GPIO56, GPIO123, 0x0e0), + MFP_ADDR_X(GPIO124, GPIO127, 0x0f4), + + MFP_ADDR_END, +}; + +#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) + +static void __init pxa168_init_gpio(void) +{ + int i; + + /* enable GPIO clock */ + __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO); + + /* unmask GPIO edge detection for all 4 banks - APMASKx */ + for (i = 0; i < 4; i++) + __raw_writel(0xffffffff, APMASK(i)); + + pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL); +} + +void __init pxa168_init_irq(void) +{ + icu_init_irq(); + pxa168_init_gpio(); +} + +/* APB peripheral clocks */ +static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); +static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); + +/* device and clock bindings */ +static struct clk_lookup pxa168_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), +}; + +static int __init pxa168_init(void) +{ + if (cpu_is_pxa168()) { + mfp_init_base(MFPR_VIRT_BASE); + mfp_init_addr(pxa168_mfp_addr_map); + pxa_init_dma(IRQ_PXA168_DMA_INT0, 32); + clks_register(ARRAY_AND_SIZE(pxa168_clkregs)); + } + + return 0; +} +postcore_initcall(pxa168_init); + +/* system timer - clock enabled, 3.25MHz */ +#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) + +static void __init pxa168_timer_init(void) +{ + /* this is early, we have to initialize the CCU registers by + * ourselves instead of using clk_* API. Clock rate is defined + * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running + */ + __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS); + + /* 3.25MHz, bus/functional clock enabled, release reset */ + __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS); + + timer_init(IRQ_PXA168_TIMER1); +} + +struct sys_timer pxa168_timer = { + .init = pxa168_timer_init, +}; + +/* on-chip devices */ +PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); +PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c new file mode 100644 index 00000000000..453f8f7758b --- /dev/null +++ b/arch/arm/mach-mmp/pxa910.c @@ -0,0 +1,158 @@ +/* + * linux/arch/arm/mach-mmp/pxa910.c + * + * Code specific to PXA910 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> + +#include <asm/mach/time.h> +#include <mach/addr-map.h> +#include <mach/regs-apbc.h> +#include <mach/regs-apmu.h> +#include <mach/cputype.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/dma.h> +#include <mach/mfp.h> +#include <mach/devices.h> + +#include "common.h" +#include "clock.h" + +#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) + +static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata = +{ + MFP_ADDR_X(GPIO0, GPIO54, 0xdc), + MFP_ADDR_X(GPIO67, GPIO98, 0x1b8), + MFP_ADDR_X(GPIO100, GPIO109, 0x238), + + MFP_ADDR(GPIO123, 0xcc), + MFP_ADDR(GPIO124, 0xd0), + + MFP_ADDR(DF_IO0, 0x40), + MFP_ADDR(DF_IO1, 0x3c), + MFP_ADDR(DF_IO2, 0x38), + MFP_ADDR(DF_IO3, 0x34), + MFP_ADDR(DF_IO4, 0x30), + MFP_ADDR(DF_IO5, 0x2c), + MFP_ADDR(DF_IO6, 0x28), + MFP_ADDR(DF_IO7, 0x24), + MFP_ADDR(DF_IO8, 0x20), + MFP_ADDR(DF_IO9, 0x1c), + MFP_ADDR(DF_IO10, 0x18), + MFP_ADDR(DF_IO11, 0x14), + MFP_ADDR(DF_IO12, 0x10), + MFP_ADDR(DF_IO13, 0xc), + MFP_ADDR(DF_IO14, 0x8), + MFP_ADDR(DF_IO15, 0x4), + + MFP_ADDR(DF_nCS0_SM_nCS2, 0x44), + MFP_ADDR(DF_nCS1_SM_nCS3, 0x48), + MFP_ADDR(SM_nCS0, 0x4c), + MFP_ADDR(SM_nCS1, 0x50), + MFP_ADDR(DF_WEn, 0x54), + MFP_ADDR(DF_REn, 0x58), + MFP_ADDR(DF_CLE_SM_OEn, 0x5c), + MFP_ADDR(DF_ALE_SM_WEn, 0x60), + MFP_ADDR(SM_SCLK, 0x64), + MFP_ADDR(DF_RDY0, 0x68), + MFP_ADDR(SM_BE0, 0x6c), + MFP_ADDR(SM_BE1, 0x70), + MFP_ADDR(SM_ADV, 0x74), + MFP_ADDR(DF_RDY1, 0x78), + MFP_ADDR(SM_ADVMUX, 0x7c), + MFP_ADDR(SM_RDY, 0x80), + + MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84), + + MFP_ADDR_END, +}; + +#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) + +static void __init pxa910_init_gpio(void) +{ + int i; + + /* enable GPIO clock */ + __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO); + + /* unmask GPIO edge detection for all 4 banks - APMASKx */ + for (i = 0; i < 4; i++) + __raw_writel(0xffffffff, APMASK(i)); + + pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL); +} + +void __init pxa910_init_irq(void) +{ + icu_init_irq(); + pxa910_init_gpio(); +} + +/* APB peripheral clocks */ +static APBC_CLK(uart1, PXA910_UART0, 1, 14745600); +static APBC_CLK(uart2, PXA910_UART1, 1, 14745600); + +/* device and clock bindings */ +static struct clk_lookup pxa910_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), +}; + +static int __init pxa910_init(void) +{ + if (cpu_is_pxa910()) { + mfp_init_base(MFPR_VIRT_BASE); + mfp_init_addr(pxa910_mfp_addr_map); + pxa_init_dma(IRQ_PXA910_DMA_INT0, 32); + clks_register(ARRAY_AND_SIZE(pxa910_clkregs)); + } + + return 0; +} +postcore_initcall(pxa910_init); + +/* system timer - clock enabled, 3.25MHz */ +#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) + +static void __init pxa910_timer_init(void) +{ + /* reset and configure */ + __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS); + __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS); + + timer_init(IRQ_PXA910_AP1_TIMER1); +} + +struct sys_timer pxa910_timer = { + .init = pxa910_timer_init, +}; + +/* on-chip devices */ + +/* NOTE: there are totally 3 UARTs on PXA910: + * + * UART1 - Slow UART (can be used both by AP and CP) + * UART2/3 - Fast UART + * + * To be backward compatible with the legacy FFUART/BTUART/STUART sequence, + * they are re-ordered as: + * + * pxa910_device_uart1 - UART2 as FFUART + * pxa910_device_uart2 - UART3 as BTUART + * + * UART1 is not used by AP for the moment. + */ +PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22); +PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24); diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c new file mode 100644 index 00000000000..0e0c9220eab --- /dev/null +++ b/arch/arm/mach-mmp/tavorevb.c @@ -0,0 +1,109 @@ +/* + * linux/arch/arm/mach-mmp/tavorevb.c + * + * Support for the Marvell PXA910-based TavorEVB Development Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/smc91x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-pxa910.h> +#include <mach/pxa910.h> +#include <mach/gpio.h> + +#include "common.h" + +static unsigned long tavorevb_pin_config[] __initdata = { + /* UART2 */ + GPIO47_UART2_RXD, + GPIO48_UART2_TXD, + + /* SMC */ + SM_nCS0_nCS0, + SM_ADV_SM_ADV, + SM_SCLK_SM_SCLK, + SM_SCLK_SM_SCLK, + SM_BE0_SM_BE0, + SM_BE1_SM_BE1, + + /* DFI */ + DF_IO0_ND_IO0, + DF_IO1_ND_IO1, + DF_IO2_ND_IO2, + DF_IO3_ND_IO3, + DF_IO4_ND_IO4, + DF_IO5_ND_IO5, + DF_IO6_ND_IO6, + DF_IO7_ND_IO7, + DF_IO8_ND_IO8, + DF_IO9_ND_IO9, + DF_IO10_ND_IO10, + DF_IO11_ND_IO11, + DF_IO12_ND_IO12, + DF_IO13_ND_IO13, + DF_IO14_ND_IO14, + DF_IO15_ND_IO15, + DF_nCS0_SM_nCS2_nCS0, + DF_ALE_SM_WEn_ND_ALE, + DF_CLE_SM_OEn_ND_CLE, + DF_WEn_DF_WEn, + DF_REn_DF_REn, + DF_RDY0_DF_RDY0, +}; + +static struct smc91x_platdata tavorevb_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = SMC_CS1_PHYS_BASE + 0x300, + .end = SMC_CS1_PHYS_BASE + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(80), + .end = gpio_to_irq(80), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .dev = { + .platform_data = &tavorevb_smc91x_info, + }, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static void __init tavorevb_init(void) +{ + mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config)); + + /* on-chip devices */ + pxa910_add_uart(1); + + /* off-chip devices */ + platform_device_register(&smc91x_device); +} + +MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa910_init_irq, + .timer = &pxa910_timer, + .init_machine = tavorevb_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c new file mode 100644 index 00000000000..b03a6eda741 --- /dev/null +++ b/arch/arm/mach-mmp/time.c @@ -0,0 +1,199 @@ +/* + * linux/arch/arm/mach-mmp/time.c + * + * Support for clocksource and clockevents + * + * Copyright (C) 2008 Marvell International Ltd. + * All rights reserved. + * + * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com> + * 2008-10-08: Bin Yang <bin.yang@marvell.com> + * + * The timers module actually includes three timers, each timer with upto + * three match comparators. Timer #0 is used here in free-running mode as + * the clock source, and match comparator #1 used as clock event device. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/sched.h> +#include <linux/cnt32_to_63.h> + +#include <mach/addr-map.h> +#include <mach/regs-timers.h> +#include <mach/irqs.h> + +#include "clock.h" + +#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE + +#define MAX_DELTA (0xfffffffe) +#define MIN_DELTA (16) + +#define TCR2NS_SCALE_FACTOR 10 + +static unsigned long tcr2ns_scale; + +static void __init set_tcr2ns_scale(unsigned long tcr_rate) +{ + unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR; + do_div(v, tcr_rate); + tcr2ns_scale = v; + /* + * We want an even value to automatically clear the top bit + * returned by cnt32_to_63() without an additional run time + * instruction. So if the LSB is 1 then round it up. + */ + if (tcr2ns_scale & 1) + tcr2ns_scale++; +} + +/* + * FIXME: the timer needs some delay to stablize the counter capture + */ +static inline uint32_t timer_read(void) +{ + int delay = 100; + + __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0)); + + while (delay--) + cpu_relax(); + + return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); +} + +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(timer_read()); + return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR; +} + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *c = dev_id; + + /* disable and clear pending interrupt status */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); + __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0)); + c->event_handler(c); + return IRQ_HANDLED; +} + +static int timer_set_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + unsigned long flags, next; + + local_irq_save(flags); + + /* clear pending interrupt status and enable */ + __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); + __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); + + next = timer_read() + delta; + __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + + local_irq_restore(flags); + return 0; +} + +static void timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ + unsigned long flags; + + local_irq_save(flags); + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + /* disable the matching interrupt */ + __raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0)); + break; + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + } + local_irq_restore(flags); +} + +static struct clock_event_device ckevt = { + .name = "clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .set_next_event = timer_set_next_event, + .set_mode = timer_set_mode, +}; + +static cycle_t clksrc_read(void) +{ + return timer_read(); +} + +static struct clocksource cksrc = { + .name = "clocksource", + .shift = 20, + .rating = 200, + .read = clksrc_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init timer_config(void) +{ + uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); + uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER); + uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR); + + __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ + + ccr &= TMR_CCR_CS_0(0x3); + __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); + + /* free-running mode */ + __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR); + + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */ + __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); + + /* enable timer counter */ + __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER); +} + +static struct irqaction timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = timer_interrupt, + .dev_id = &ckevt, +}; + +void __init timer_init(int irq) +{ + timer_config(); + + set_tcr2ns_scale(CLOCK_TICK_RATE); + + ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift); + ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt); + ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt); + ckevt.cpumask = cpumask_of(0); + + cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift); + + setup_irq(irq, &timer_irq); + + clocksource_register(&cksrc); + clockevents_register_device(&ckevt); +} diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c new file mode 100644 index 00000000000..08cfef6c92a --- /dev/null +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -0,0 +1,47 @@ +/* + * linux/arch/arm/mach-mmp/ttc_dkb.c + * + * Support for the Marvell PXA910-based TTC_DKB Development Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-pxa910.h> +#include <mach/pxa910.h> + +#include "common.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +static unsigned long ttc_dkb_pin_config[] __initdata = { + /* UART2 */ + GPIO47_UART2_RXD, + GPIO48_UART2_TXD, +}; + +static void __init ttc_dkb_init(void) +{ + mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); + + /* on-chip devices */ + pxa910_add_uart(1); +} + +MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa910_init_irq, + .timer = &pxa910_timer, + .init_machine = ttc_dkb_init, +MACHINE_END diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h index f05ad2e0f23..574ccc493da 100644 --- a/arch/arm/mach-msm/include/mach/system.h +++ b/arch/arm/mach-msm/include/mach/system.h @@ -17,7 +17,7 @@ void arch_idle(void); -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { for (;;) ; /* depends on IPC w/ other core */ } diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index d83cb86837d..6fbe68fe441 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -8,6 +8,12 @@ config MACH_DB78X00_BP Say 'Y' here if you want your kernel to support the Marvell DB-78x00-BP Development Board. +config MACH_RD78X00_MASA + bool "Marvell RD-78x00-mASA Reference Design" + help + Say 'Y' here if you want your kernel to support the + Marvell RD-78x00-mASA Reference Design. + endmenu endif diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile index ec16c05c3b1..da628b7f3bb 100644 --- a/arch/arm/mach-mv78xx0/Makefile +++ b/arch/arm/mach-mv78xx0/Makefile @@ -1,2 +1,3 @@ obj-y += common.o addr-map.o irq.o pcie.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o +obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b0e4e0d8f50..a575daaa62d 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -14,7 +14,9 @@ #include <linux/serial_8250.h> #include <linux/mbus.h> #include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> +#include <linux/ethtool.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/mv78xx0.h> @@ -430,9 +432,22 @@ static struct platform_device mv78xx0_ge10 = { void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) { + u32 dev, rev; + eth_data->shared = &mv78xx0_ge10_shared; mv78xx0_ge10.dev.platform_data = eth_data; + /* + * On the Z0, ge10 and ge11 are internally connected back + * to back, and not brought out. + */ + mv78xx0_pcie_id(&dev, &rev); + if (dev == MV78X00_Z0_DEV_ID) { + eth_data->phy_addr = MV643XX_ETH_PHY_NONE; + eth_data->speed = SPEED_1000; + eth_data->duplex = DUPLEX_FULL; + } + platform_device_register(&mv78xx0_ge10_shared); platform_device_register(&mv78xx0_ge10); } @@ -484,13 +499,101 @@ static struct platform_device mv78xx0_ge11 = { void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) { + u32 dev, rev; + eth_data->shared = &mv78xx0_ge11_shared; mv78xx0_ge11.dev.platform_data = eth_data; + /* + * On the Z0, ge10 and ge11 are internally connected back + * to back, and not brought out. + */ + mv78xx0_pcie_id(&dev, &rev); + if (dev == MV78X00_Z0_DEV_ID) { + eth_data->phy_addr = MV643XX_ETH_PHY_NONE; + eth_data->speed = SPEED_1000; + eth_data->duplex = DUPLEX_FULL; + } + platform_device_register(&mv78xx0_ge11_shared); platform_device_register(&mv78xx0_ge11); } +/***************************************************************************** + * I2C bus 0 + ****************************************************************************/ + +static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource mv78xx0_i2c_0_resources[] = { + { + .name = "i2c 0 base", + .start = I2C_0_PHYS_BASE, + .end = I2C_0_PHYS_BASE + 0x1f, + .flags = IORESOURCE_MEM, + }, { + .name = "i2c 0 irq", + .start = IRQ_MV78XX0_I2C_0, + .end = IRQ_MV78XX0_I2C_0, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device mv78xx0_i2c_0 = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv78xx0_i2c_0_resources), + .resource = mv78xx0_i2c_0_resources, + .dev = { + .platform_data = &mv78xx0_i2c_0_pdata, + }, +}; + +/***************************************************************************** + * I2C bus 1 + ****************************************************************************/ + +static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource mv78xx0_i2c_1_resources[] = { + { + .name = "i2c 1 base", + .start = I2C_1_PHYS_BASE, + .end = I2C_1_PHYS_BASE + 0x1f, + .flags = IORESOURCE_MEM, + }, { + .name = "i2c 1 irq", + .start = IRQ_MV78XX0_I2C_1, + .end = IRQ_MV78XX0_I2C_1, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device mv78xx0_i2c_1 = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv78xx0_i2c_1_resources), + .resource = mv78xx0_i2c_1_resources, + .dev = { + .platform_data = &mv78xx0_i2c_1_pdata, + }, +}; + +void __init mv78xx0_i2c_init(void) +{ + platform_device_register(&mv78xx0_i2c_0); + platform_device_register(&mv78xx0_i2c_1); +} /***************************************************************************** * SATA @@ -719,6 +822,32 @@ struct sys_timer mv78xx0_timer = { /***************************************************************************** * General ****************************************************************************/ +static char * __init mv78xx0_id(void) +{ + u32 dev, rev; + + mv78xx0_pcie_id(&dev, &rev); + + if (dev == MV78X00_Z0_DEV_ID) { + if (rev == MV78X00_REV_Z0) + return "MV78X00-Z0"; + else + return "MV78X00-Rev-Unsupported"; + } else if (dev == MV78100_DEV_ID) { + if (rev == MV78100_REV_A0) + return "MV78100-A0"; + else + return "MV78100-Rev-Unsupported"; + } else if (dev == MV78200_DEV_ID) { + if (rev == MV78100_REV_A0) + return "MV78200-A0"; + else + return "MV78200-Rev-Unsupported"; + } else { + return "Device-Unknown"; + } +} + static int __init is_l2_writethrough(void) { return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH); @@ -737,7 +866,8 @@ void __init mv78xx0_init(void) get_pclk_l2clk(hclk, core_index, &pclk, &l2clk); tclk = get_tclk(); - printk(KERN_INFO "MV78xx0 core #%d, ", core_index); + printk(KERN_INFO "%s ", mv78xx0_id()); + printk("core #%d, ", core_index); printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h index 78af5de319d..befc2247546 100644 --- a/arch/arm/mach-mv78xx0/common.h +++ b/arch/arm/mach-mv78xx0/common.h @@ -29,6 +29,8 @@ void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, int maj, int min); +void mv78xx0_pcie_id(u32 *dev, u32 *rev); + void mv78xx0_ehci0_init(void); void mv78xx0_ehci1_init(void); void mv78xx0_ehci2_init(void); @@ -42,6 +44,7 @@ void mv78xx0_uart0_init(void); void mv78xx0_uart1_init(void); void mv78xx0_uart2_init(void); void mv78xx0_uart3_init(void); +void mv78xx0_i2c_init(void); extern struct sys_timer mv78xx0_timer; diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 2e285bbb7bb..efdabe04c69 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -14,6 +14,7 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <linux/i2c.h> #include <mach/mv78xx0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -28,21 +29,22 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = { }; static struct mv643xx_eth_platform_data db78x00_ge10_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, + .phy_addr = MV643XX_ETH_PHY_ADDR(10), }; static struct mv643xx_eth_platform_data db78x00_ge11_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, + .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; static struct mv_sata_platform_data db78x00_sata_data = { .n_ports = 2, }; +static struct i2c_board_info __initdata db78x00_i2c_rtc = { + I2C_BOARD_INFO("ds1338", 0x68), +}; + + static void __init db78x00_init(void) { /* @@ -64,6 +66,8 @@ static void __init db78x00_init(void) mv78xx0_sata_init(&db78x00_sata_data); mv78xx0_uart0_init(); mv78xx0_uart2_init(); + mv78xx0_i2c_init(); + i2c_register_board_info(0, &db78x00_i2c_rtc, 1); } else { mv78xx0_uart1_init(); mv78xx0_uart3_init(); diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index e930ea5330a..582cffc733a 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -80,6 +80,18 @@ #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) /* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 + +/* * Register Map */ #define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) @@ -90,6 +102,8 @@ #define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) #define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) #define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) +#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) +#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100) #define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) #define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h index 7d517940883..1d6350b22d0 100644 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ b/arch/arm/mach-mv78xx0/include/mach/system.h @@ -17,7 +17,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* * Enable soft reset to assert RSTOUTn. diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index aad3a7a2f83..a560439dcc3 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -33,6 +33,12 @@ static struct resource pcie_io_space; static struct resource pcie_mem_space; +void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE); + *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE); +} + static void __init mv78xx0_pcie_preinit(void) { int i; diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c new file mode 100644 index 00000000000..e136b7a0335 --- /dev/null +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-mv78x00/rd78x00-masa-setup.c + * + * Marvell RD-78x00-mASA Development Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <mach/mv78xx0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include "common.h" + +static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(9), +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = { +}; + +static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = { +}; + +static struct mv_sata_platform_data rd78x00_masa_sata_data = { + .n_ports = 2, +}; + +static void __init rd78x00_masa_init(void) +{ + /* + * Basic MV78x00 setup. Needs to be called early. + */ + mv78xx0_init(); + + /* + * Partition on-chip peripherals between the two CPU cores. + */ + if (mv78xx0_core_index() == 0) { + mv78xx0_ehci0_init(); + mv78xx0_ehci1_init(); + mv78xx0_ge00_init(&rd78x00_masa_ge00_data); + mv78xx0_ge10_init(&rd78x00_masa_ge10_data); + mv78xx0_sata_init(&rd78x00_masa_sata_data); + mv78xx0_uart0_init(); + mv78xx0_uart2_init(); + } else { + mv78xx0_ehci2_init(); + mv78xx0_ge01_init(&rd78x00_masa_ge01_data); + mv78xx0_ge11_init(&rd78x00_masa_ge11_data); + mv78xx0_uart1_init(); + mv78xx0_uart3_init(); + } +} + +static int __init rd78x00_pci_init(void) +{ + /* + * Assign all PCIe devices to CPU core #0. + */ + if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0) + mv78xx0_pcie_init(1, 1); + + return 0; +} +subsys_initcall(rd78x00_pci_init); + +MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") + /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ + .phys_io = MV78XX0_REGS_PHYS_BASE, + .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = rd78x00_masa_init, + .map_io = mv78xx0_map_io, + .init_irq = mv78xx0_init_irq, + .timer = &mv78xx0_timer, +MACHINE_END diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig index 2b59fc74784..eb7660f5d4b 100644 --- a/arch/arm/mach-mx1/Kconfig +++ b/arch/arm/mach-mx1/Kconfig @@ -1,6 +1,6 @@ if ARCH_MX1 -comment "MX1 Platforms" +comment "MX1 platforms:" config MACH_MXLADS bool @@ -11,4 +11,9 @@ config ARCH_MX1ADS help Say Y here if you are using Motorola MX1ADS/MXLADS boards +config MACH_SCB9328 + bool "Synertronixx scb9328" + help + Say Y here if you are using a Synertronixx scb9328 board + endif diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile index b969719011f..82f1309568e 100644 --- a/arch/arm/mach-mx1/Makefile +++ b/arch/arm/mach-mx1/Makefile @@ -8,3 +8,4 @@ obj-y += generic.o clock.o devices.o # Specific board support obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o +obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c index 4bcd1ece55f..0d0f306851d 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-mx1/clock.c @@ -25,6 +25,7 @@ #include <mach/clock.h> #include <mach/hardware.h> +#include <mach/common.h> #include "crm_regs.h" static int _clk_enable(struct clk *clk) @@ -87,33 +88,6 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) return clk->parent->set_rate(clk->parent, rate); } -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * - ((mfi << 16) + (mfn << 16) / (mfd + 1)); - quot = (pd + 1) * (1 << 16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned long)ll; -} - static unsigned long clk16m_get_rate(struct clk *clk) { return 16000000; @@ -188,7 +162,7 @@ static struct clk prem_clk = { static unsigned long system_clk_get_rate(struct clk *clk) { - return mx1_decode_pll(__raw_readl(CCM_SPCTL0), + return mxc_decode_pll(__raw_readl(CCM_SPCTL0), clk_get_rate(clk->parent)); } @@ -200,7 +174,7 @@ static struct clk system_clk = { static unsigned long mcu_clk_get_rate(struct clk *clk) { - return mx1_decode_pll(__raw_readl(CCM_MPCTL0), + return mxc_decode_pll(__raw_readl(CCM_MPCTL0), clk_get_rate(clk->parent)); } @@ -488,7 +462,7 @@ static struct clk clko_clk = { }; static struct clk dma_clk = { - .name = "dma_clk", + .name = "dma", .parent = &hclk, .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -539,7 +513,7 @@ static struct clk gpt_clk = { }; static struct clk uart_clk = { - .name = "uart_clk", + .name = "uart", .parent = &perclk[0], .round_rate = _clk_parent_round_rate, .set_rate = _clk_parent_set_rate, @@ -621,7 +595,7 @@ static struct clk *mxc_clks[] = { &rtc_clk, }; -int __init mxc_clocks_init(unsigned long fref) +int __init mx1_clocks_init(unsigned long fref) { struct clk **clkp; unsigned int reg; @@ -652,5 +626,7 @@ int __init mxc_clocks_init(unsigned long fref) clk_enable(&hclk); clk_enable(&fclk); + mxc_timer_init(&gpt_clk); + return 0; } diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index a95644193f3..97f42d96d7a 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -23,10 +23,11 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> - #include <mach/irqs.h> #include <mach/hardware.h> +#include "devices.h" + static struct resource imx_csi_resources[] = { [0] = { .start = 0x00224000, diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 3200cf60e38..7ae229bc1b7 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -16,6 +16,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -25,7 +27,11 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> -#include <mach/iomux-mx1-mx2.h> +#include <mach/irqs.h> +#ifdef CONFIG_I2C_IMX +#include <mach/i2c.h> +#endif +#include <mach/iomux.h> #include "devices.h" /* @@ -105,6 +111,55 @@ static struct platform_device flash_device = { }; /* + * I2C + */ + +#ifdef CONFIG_I2C_IMX +static int i2c_pins[] = { + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, +}; + +static int i2c_init(struct device *dev) +{ + return mxc_gpio_setup_multiple_pins(i2c_pins, + ARRAY_SIZE(i2c_pins), "I2C"); +} + +static void i2c_exit(struct device *dev) +{ + mxc_gpio_release_multiple_pins(i2c_pins, + ARRAY_SIZE(i2c_pins)); +} + +static struct pcf857x_platform_data pcf857x_data[] = { + { + .gpio_base = 4 * 32, + }, { + .gpio_base = 4 * 32 + 16, + } +}; + +static struct imxi2c_platform_data mx1ads_i2c_data = { + .bitrate = 100000, + .init = i2c_init, + .exit = i2c_exit, +}; + +static struct i2c_board_info mx1ads_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf857x", 0x22), + .type = "pcf8575", + .platform_data = &pcf857x_data[0], + }, { + I2C_BOARD_INFO("pcf857x", 0x24), + .type = "pcf8575", + .platform_data = &pcf857x_data[1], + }, +}; +#endif + +/* * Board init */ static void __init mx1ads_init(void) @@ -115,12 +170,19 @@ static void __init mx1ads_init(void) /* Physmap flash */ mxc_register_device(&flash_device, &mx1ads_flash_data); + + /* I2C */ +#ifdef CONFIG_I2C_IMX + i2c_register_board_info(0, mx1ads_i2c_devices, + ARRAY_SIZE(mx1ads_i2c_devices)); + + mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); +#endif } static void __init mx1ads_timer_init(void) { - mxc_clocks_init(32000); - mxc_timer_init("gpt_clk"); + mx1_clocks_init(32000); } struct sys_timer mx1ads_timer = { diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c new file mode 100644 index 00000000000..0e71f3fa28b --- /dev/null +++ b/arch/arm/mach-mx1/scb9328.c @@ -0,0 +1,160 @@ +/* + * linux/arch/arm/mach-mx1/scb9328.c + * + * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> + * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/interrupt.h> +#include <linux/dm9000.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> + +#include "devices.h" + +/* + * This scb9328 has a 32MiB flash + */ +static struct resource flash_resource = { + .start = IMX_CS0_PHYS, + .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data scb_flash_data = { + .width = 2, +}; + +static struct platform_device scb_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &scb_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +/* + * scb9328 has a DM9000 network controller + * connected to CS5, with 16 bit data path + * and interrupt connected to GPIO 3 + */ + +/* + * internal datapath is fixed 16 bit + */ +static struct dm9000_plat_data dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +/* + * the DM9000 drivers wants two defined address spaces + * to gain access to address latch registers and the data path. + */ +static struct resource dm9000x_resources[] = { + [0] = { + .name = "address area", + .start = IMX_CS5_PHYS, + .end = IMX_CS5_PHYS + 1, + .flags = IORESOURCE_MEM /* address access */ + }, + [1] = { + .name = "data area", + .start = IMX_CS5_PHYS + 4, + .end = IMX_CS5_PHYS + 5, + .flags = IORESOURCE_MEM /* data access */ + }, + [2] = { + .start = IRQ_GPIOC(3), + .end = IRQ_GPIOC(3), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL + }, +}; + +static struct platform_device dm9000x_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000x_resources), + .resource = dm9000x_resources, + .dev = { + .platform_data = &dm9000_platdata, + } +}; + +static int mxc_uart1_pins[] = { + PC9_PF_UART1_CTS, + PC10_PF_UART1_RTS, + PC11_PF_UART1_TXD, + PC12_PF_UART1_RXD, +}; + +static int uart1_mxc_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), "UART1"); +} + +static int uart1_mxc_exit(struct platform_device *pdev) +{ + mxc_gpio_release_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins)); + return 0; +} + +static struct imxuart_platform_data uart_pdata = { + .init = uart1_mxc_init, + .exit = uart1_mxc_exit, + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &scb_flash_device, + &dm9000x_device, +}; + +/* + * scb9328_init - Init the CPU card itself + */ +static void __init scb9328_init(void) +{ + mxc_register_device(&imx_uart1_device, &uart_pdata); + + printk(KERN_INFO"Scb9328: Adding devices\n"); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init scb9328_timer_init(void) +{ + mx1_clocks_init(32000); +} + +static struct sys_timer scb9328_timer = { + .init = scb9328_timer_init, +}; + +MACHINE_START(SCB9328, "Synertronixx scb9328") + /* Sascha Hauer */ + .phys_io = 0x00200000, + .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, + .boot_params = 0x08000100, + .map_io = mxc_map_io, + .init_irq = mxc_init_irq, + .timer = &scb9328_timer, + .init_machine = scb9328_init, +MACHINE_END diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 1eaa97cb716..42a788842f4 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -1,14 +1,22 @@ -comment "MX2 family CPU support" - depends on ARCH_MX2 +if ARCH_MX2 + +choice + prompt "CPUs:" + default MACH_MX21 + +config MACH_MX21 + bool "i.MX21 support" + help + This enables support for Freescale's MX2 based i.MX21 processor. config MACH_MX27 bool "i.MX27 support" - depends on ARCH_MX2 help This enables support for Freescale's MX2 based i.MX27 processor. -comment "MX2 Platforms" - depends on ARCH_MX2 +endchoice + +comment "MX2 platforms:" config MACH_MX27ADS bool "MX27ADS platform" @@ -37,3 +45,5 @@ config MACH_PCM970_BASEBOARD PCM970 evaluation board. endchoice + +endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 382d86080e8..950649a9154 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,7 +4,9 @@ # Object file lists. -obj-y := system.o generic.o devices.o serial.o +obj-y := generic.o devices.o serial.o + +obj-$(CONFIG_MACH_MX21) += clock_imx21.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot index 696831dcd48..e867398a8fd 100644 --- a/arch/arm/mach-mx2/Makefile.boot +++ b/arch/arm/mach-mx2/Makefile.boot @@ -1,3 +1,7 @@ - zreladdr-y := 0xA0008000 -params_phys-y := 0xA0000100 -initrd_phys-y := 0xA0800000 +zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 +params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 +initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 + +zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000 +params_phys-$(CONFIG_MACH_MX27) := 0xA0000100 +initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c new file mode 100644 index 00000000000..2dee5c87614 --- /dev/null +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -0,0 +1,984 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> + +#include <mach/clock.h> +#include <mach/common.h> +#include <asm/clkdev.h> +#include <asm/div64.h> + +#include "crm_regs.h" + +static int _clk_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + return 0; +} + +static void _clk_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static int _clk_spll_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(CCM_CSCR); + reg |= CCM_CSCR_SPEN; + __raw_writel(reg, CCM_CSCR); + + while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0) + ; + return 0; +} + +static void _clk_spll_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(CCM_CSCR); + reg &= ~CCM_CSCR_SPEN; + __raw_writel(reg, CCM_CSCR); +} + + +#define CSCR() (__raw_readl(CCM_CSCR)) +#define PCDR0() (__raw_readl(CCM_PCDR0)) +#define PCDR1() (__raw_readl(CCM_PCDR1)) + +static unsigned long _clk_perclkx_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 64) + div = 64; + + return parent_rate / div; +} + +static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->id < 0 || clk->id > 3) + return -EINVAL; + + div = parent_rate / rate; + if (div > 64 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = + __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK << + (clk->id << 3)); + reg |= div << (clk->id << 3); + __raw_writel(reg, CCM_PCDR1); + + return 0; +} + +static unsigned long _clk_usb_recalc(struct clk *clk) +{ + unsigned long usb_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET; + + return parent_rate / (usb_pdf + 1U); +} + +static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf) +{ + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */ + + return 2UL * parent_rate / pdf; +} + +static unsigned long _clk_ssi1_recalc(struct clk *clk) +{ + return _clk_ssix_recalc(clk, + (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) + >> CCM_PCDR0_SSI1BAUDDIV_OFFSET); +} + +static unsigned long _clk_ssi2_recalc(struct clk *clk) +{ + return _clk_ssix_recalc(clk, + (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >> + CCM_PCDR0_SSI2BAUDDIV_OFFSET); +} + +static unsigned long _clk_nfc_recalc(struct clk *clk) +{ + unsigned long nfc_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK) + >> CCM_PCDR0_NFCDIV_OFFSET; + + return parent_rate / (nfc_pdf + 1); +} + +static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->round_rate(clk->parent, rate); +} + +static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->set_rate(clk->parent, rate); +} + +static unsigned long external_high_reference; /* in Hz */ + +static unsigned long get_high_reference_clock_rate(struct clk *clk) +{ + return external_high_reference; +} + +/* + * the high frequency external clock reference + * Default case is 26MHz. + */ +static struct clk ckih_clk = { + .get_rate = get_high_reference_clock_rate, +}; + +static unsigned long external_low_reference; /* in Hz */ + +static unsigned long get_low_reference_clock_rate(struct clk *clk) +{ + return external_low_reference; +} + +/* + * the low frequency external clock reference + * Default case is 32.768kHz. + */ +static struct clk ckil_clk = { + .get_rate = get_low_reference_clock_rate, +}; + + +static unsigned long _clk_fpm_recalc(struct clk *clk) +{ + return clk_get_rate(clk->parent) * 512; +} + +/* Output of frequency pre multiplier */ +static struct clk fpm_clk = { + .parent = &ckil_clk, + .get_rate = _clk_fpm_recalc, +}; + +static unsigned long get_mpll_clk(struct clk *clk) +{ + uint32_t reg; + unsigned long ref_clk; + unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; + unsigned long long temp; + + ref_clk = clk_get_rate(clk->parent); + + reg = __raw_readl(CCM_MPCTL0); + pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET; + mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET; + mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET; + mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET; + + mfi = (mfi <= 5) ? 5 : mfi; + temp = 2LL * ref_clk * mfn; + do_div(temp, mfd + 1); + temp = 2LL * ref_clk * mfi + temp; + do_div(temp, pdf + 1); + + return (unsigned long)temp; +} + +static struct clk mpll_clk = { + .parent = &ckih_clk, + .get_rate = get_mpll_clk, +}; + +static unsigned long _clk_fclk_get_rate(struct clk *clk) +{ + unsigned long parent_rate; + u32 div; + + div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET; + parent_rate = clk_get_rate(clk->parent); + + return parent_rate / (div+1); +} + +static struct clk fclk_clk = { + .parent = &mpll_clk, + .get_rate = _clk_fclk_get_rate +}; + +static unsigned long get_spll_clk(struct clk *clk) +{ + uint32_t reg; + unsigned long ref_clk; + unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; + unsigned long long temp; + + ref_clk = clk_get_rate(clk->parent); + + reg = __raw_readl(CCM_SPCTL0); + pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET; + mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET; + mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET; + mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET; + + mfi = (mfi <= 5) ? 5 : mfi; + temp = 2LL * ref_clk * mfn; + do_div(temp, mfd + 1); + temp = 2LL * ref_clk * mfi + temp; + do_div(temp, pdf + 1); + + return (unsigned long)temp; +} + +static struct clk spll_clk = { + .parent = &ckih_clk, + .get_rate = get_spll_clk, + .enable = _clk_spll_enable, + .disable = _clk_spll_disable, +}; + +static unsigned long get_hclk_clk(struct clk *clk) +{ + unsigned long rate; + unsigned long bclk_pdf; + + bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK) + >> CCM_CSCR_BCLK_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (bclk_pdf + 1); +} + +static struct clk hclk_clk = { + .parent = &fclk_clk, + .get_rate = get_hclk_clk, +}; + +static unsigned long get_ipg_clk(struct clk *clk) +{ + unsigned long rate; + unsigned long ipg_pdf; + + ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (ipg_pdf + 1); +} + +static struct clk ipg_clk = { + .parent = &hclk_clk, + .get_rate = get_ipg_clk, +}; + +static unsigned long _clk_perclkx_recalc(struct clk *clk) +{ + unsigned long perclk_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->id < 0 || clk->id > 3) + return 0; + + perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK; + + return parent_rate / (perclk_pdf + 1); +} + +static struct clk per_clk[] = { + { + .id = 0, + .parent = &mpll_clk, + .get_rate = _clk_perclkx_recalc, + }, { + .id = 1, + .parent = &mpll_clk, + .get_rate = _clk_perclkx_recalc, + }, { + .id = 2, + .parent = &mpll_clk, + .round_rate = _clk_perclkx_round_rate, + .set_rate = _clk_perclkx_set_rate, + .get_rate = _clk_perclkx_recalc, + /* Enable/Disable done via lcd_clkc[1] */ + }, { + .id = 3, + .parent = &mpll_clk, + .round_rate = _clk_perclkx_round_rate, + .set_rate = _clk_perclkx_set_rate, + .get_rate = _clk_perclkx_recalc, + /* Enable/Disable done via csi_clk[1] */ + }, +}; + +static struct clk uart_ipg_clk[]; + +static struct clk uart_clk[] = { + { + .id = 0, + .parent = &per_clk[0], + .secondary = &uart_ipg_clk[0], + }, { + .id = 1, + .parent = &per_clk[0], + .secondary = &uart_ipg_clk[1], + }, { + .id = 2, + .parent = &per_clk[0], + .secondary = &uart_ipg_clk[2], + }, { + .id = 3, + .parent = &per_clk[0], + .secondary = &uart_ipg_clk[3], + }, +}; + +static struct clk uart_ipg_clk[] = { + { + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_UART1_REG, + .enable_shift = CCM_PCCR_UART1_OFFSET, + .disable = _clk_disable, + }, { + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_UART2_REG, + .enable_shift = CCM_PCCR_UART2_OFFSET, + .disable = _clk_disable, + }, { + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_UART3_REG, + .enable_shift = CCM_PCCR_UART3_OFFSET, + .disable = _clk_disable, + }, { + .id = 3, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_UART4_REG, + .enable_shift = CCM_PCCR_UART4_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt_ipg_clk[]; + +static struct clk gpt_clk[] = { + { + .id = 0, + .parent = &per_clk[0], + .secondary = &gpt_ipg_clk[0], + }, { + .id = 1, + .parent = &per_clk[0], + .secondary = &gpt_ipg_clk[1], + }, { + .id = 2, + .parent = &per_clk[0], + .secondary = &gpt_ipg_clk[2], + }, +}; + +static struct clk gpt_ipg_clk[] = { + { + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_GPT1_REG, + .enable_shift = CCM_PCCR_GPT1_OFFSET, + .disable = _clk_disable, + }, { + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_GPT2_REG, + .enable_shift = CCM_PCCR_GPT2_OFFSET, + .disable = _clk_disable, + }, { + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_GPT3_REG, + .enable_shift = CCM_PCCR_GPT3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk pwm_clk[] = { + { + .parent = &per_clk[0], + .secondary = &pwm_clk[1], + }, { + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_PWM_REG, + .enable_shift = CCM_PCCR_PWM_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk sdhc_ipg_clk[]; + +static struct clk sdhc_clk[] = { + { + .id = 0, + .parent = &per_clk[1], + .secondary = &sdhc_ipg_clk[0], + }, { + .id = 1, + .parent = &per_clk[1], + .secondary = &sdhc_ipg_clk[1], + }, +}; + +static struct clk sdhc_ipg_clk[] = { + { + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_SDHC1_REG, + .enable_shift = CCM_PCCR_SDHC1_OFFSET, + .disable = _clk_disable, + }, { + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_SDHC2_REG, + .enable_shift = CCM_PCCR_SDHC2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk cspi_ipg_clk[]; + +static struct clk cspi_clk[] = { + { + .id = 0, + .parent = &per_clk[1], + .secondary = &cspi_ipg_clk[0], + }, { + .id = 1, + .parent = &per_clk[1], + .secondary = &cspi_ipg_clk[1], + }, { + .id = 2, + .parent = &per_clk[1], + .secondary = &cspi_ipg_clk[2], + }, +}; + +static struct clk cspi_ipg_clk[] = { + { + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_CSPI1_REG, + .enable_shift = CCM_PCCR_CSPI1_OFFSET, + .disable = _clk_disable, + }, { + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_CSPI2_REG, + .enable_shift = CCM_PCCR_CSPI2_OFFSET, + .disable = _clk_disable, + }, { + .id = 3, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_CSPI3_REG, + .enable_shift = CCM_PCCR_CSPI3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk lcdc_clk[] = { + { + .parent = &per_clk[2], + .secondary = &lcdc_clk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + }, { + .parent = &ipg_clk, + .secondary = &lcdc_clk[2], + .enable = _clk_enable, + .enable_reg = CCM_PCCR_LCDC_REG, + .enable_shift = CCM_PCCR_LCDC_OFFSET, + .disable = _clk_disable, + }, { + .parent = &hclk_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_HCLK_LCDC_REG, + .enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk csi_clk[] = { + { + .parent = &per_clk[3], + .secondary = &csi_clk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + }, { + .parent = &hclk_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_HCLK_CSI_REG, + .enable_shift = CCM_PCCR_HCLK_CSI_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk usb_clk[] = { + { + .parent = &spll_clk, + .get_rate = _clk_usb_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_USBOTG_REG, + .enable_shift = CCM_PCCR_USBOTG_OFFSET, + .disable = _clk_disable, + }, { + .parent = &hclk_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_HCLK_USBOTG_REG, + .enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET, + .disable = _clk_disable, + } +}; + +static struct clk ssi_ipg_clk[]; + +static struct clk ssi_clk[] = { + { + .id = 0, + .parent = &mpll_clk, + .secondary = &ssi_ipg_clk[0], + .get_rate = _clk_ssi1_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_SSI1_BAUD_REG, + .enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET, + .disable = _clk_disable, + }, { + .id = 1, + .parent = &mpll_clk, + .secondary = &ssi_ipg_clk[1], + .get_rate = _clk_ssi2_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_SSI2_BAUD_REG, + .enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk ssi_ipg_clk[] = { + { + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_SSI1_REG, + .enable_shift = CCM_PCCR_SSI1_IPG_OFFSET, + .disable = _clk_disable, + }, { + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_SSI2_REG, + .enable_shift = CCM_PCCR_SSI2_IPG_OFFSET, + .disable = _clk_disable, + }, +}; + + +static struct clk nfc_clk = { + .parent = &fclk_clk, + .get_rate = _clk_nfc_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_NFC_REG, + .enable_shift = CCM_PCCR_NFC_OFFSET, + .disable = _clk_disable, +}; + +static struct clk dma_clk[] = { + { + .parent = &hclk_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_DMA_REG, + .enable_shift = CCM_PCCR_DMA_OFFSET, + .disable = _clk_disable, + .secondary = &dma_clk[1], + }, { + .enable = _clk_enable, + .enable_reg = CCM_PCCR_HCLK_DMA_REG, + .enable_shift = CCM_PCCR_HCLK_DMA_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk brom_clk = { + .parent = &hclk_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_HCLK_BROM_REG, + .enable_shift = CCM_PCCR_HCLK_BROM_OFFSET, + .disable = _clk_disable, +}; + +static struct clk emma_clk[] = { + { + .parent = &hclk_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_EMMA_REG, + .enable_shift = CCM_PCCR_EMMA_OFFSET, + .disable = _clk_disable, + .secondary = &emma_clk[1], + }, { + .enable = _clk_enable, + .enable_reg = CCM_PCCR_HCLK_EMMA_REG, + .enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET, + .disable = _clk_disable, + } +}; + +static struct clk slcdc_clk[] = { + { + .parent = &hclk_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_SLCDC_REG, + .enable_shift = CCM_PCCR_SLCDC_OFFSET, + .disable = _clk_disable, + .secondary = &slcdc_clk[1], + }, { + .enable = _clk_enable, + .enable_reg = CCM_PCCR_HCLK_SLCDC_REG, + .enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET, + .disable = _clk_disable, + } +}; + +static struct clk wdog_clk = { + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_WDT_REG, + .enable_shift = CCM_PCCR_WDT_OFFSET, + .disable = _clk_disable, +}; + +static struct clk gpio_clk = { + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_GPIO_REG, + .enable_shift = CCM_PCCR_GPIO_OFFSET, + .disable = _clk_disable, +}; + +static struct clk i2c_clk = { + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_I2C1_REG, + .enable_shift = CCM_PCCR_I2C1_OFFSET, + .disable = _clk_disable, +}; + +static struct clk kpp_clk = { + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_KPP_REG, + .enable_shift = CCM_PCCR_KPP_OFFSET, + .disable = _clk_disable, +}; + +static struct clk owire_clk = { + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_OWIRE_REG, + .enable_shift = CCM_PCCR_OWIRE_OFFSET, + .disable = _clk_disable, +}; + +static struct clk rtc_clk = { + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR_RTC_REG, + .enable_shift = CCM_PCCR_RTC_OFFSET, + .disable = _clk_disable, +}; + +static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 8) + div = 8; + + return parent_rate / div; +} + +static int _clk_clko_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = __raw_readl(CCM_PCDR0); + + if (clk->parent == &usb_clk[0]) { + reg &= ~CCM_PCDR0_48MDIV_MASK; + reg |= div << CCM_PCDR0_48MDIV_OFFSET; + } + __raw_writel(reg, CCM_PCDR0); + + return 0; +} + +static unsigned long _clk_clko_recalc(struct clk *clk) +{ + u32 div = 0; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->parent == &usb_clk[0]) /* 48M */ + div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK + >> CCM_PCDR0_48MDIV_OFFSET; + div++; + + return parent_rate / div; +} + +static struct clk clko_clk; + +static int _clk_clko_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK; + + if (parent == &ckil_clk) + reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &fpm_clk) + reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ckih_clk) + reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == mpll_clk.parent) + reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == spll_clk.parent) + reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &mpll_clk) + reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &spll_clk) + reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &fclk_clk) + reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &hclk_clk) + reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ipg_clk) + reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[0]) + reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[1]) + reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[2]) + reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[3]) + reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ssi_clk[0]) + reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ssi_clk[1]) + reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &nfc_clk) + reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &usb_clk[0]) + reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &clko_clk) + reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET; + else + return -EINVAL; + + __raw_writel(reg, CCM_CCSR); + + return 0; +} + +static struct clk clko_clk = { + .get_rate = _clk_clko_recalc, + .set_rate = _clk_clko_set_rate, + .round_rate = _clk_clko_round_rate, + .set_parent = _clk_clko_set_parent, +}; + + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, +static struct clk_lookup lookups[] __initdata = { +/* It's unlikely that any driver wants one of them directly: + _REGISTER_CLOCK(NULL, "ckih", ckih_clk) + _REGISTER_CLOCK(NULL, "ckil", ckil_clk) + _REGISTER_CLOCK(NULL, "fpm", fpm_clk) + _REGISTER_CLOCK(NULL, "mpll", mpll_clk) + _REGISTER_CLOCK(NULL, "spll", spll_clk) + _REGISTER_CLOCK(NULL, "fclk", fclk_clk) + _REGISTER_CLOCK(NULL, "hclk", hclk_clk) + _REGISTER_CLOCK(NULL, "ipg", ipg_clk) +*/ + _REGISTER_CLOCK(NULL, "perclk1", per_clk[0]) + _REGISTER_CLOCK(NULL, "perclk2", per_clk[1]) + _REGISTER_CLOCK(NULL, "perclk3", per_clk[2]) + _REGISTER_CLOCK(NULL, "perclk4", per_clk[3]) + _REGISTER_CLOCK(NULL, "clko", clko_clk) + _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0]) + _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1]) + _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2]) + _REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3]) + _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0]) + _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1]) + _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2]) + _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0]) + _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0]) + _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1]) + _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) + _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) + _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) + _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0]) + _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) + _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) + _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) + _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) + _REGISTER_CLOCK(NULL, "nfc", nfc_clk) + _REGISTER_CLOCK(NULL, "dma", dma_clk[0]) + _REGISTER_CLOCK(NULL, "brom", brom_clk) + _REGISTER_CLOCK(NULL, "emma", emma_clk[0]) + _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) + _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK(NULL, "gpio", gpio_clk) + _REGISTER_CLOCK(NULL, "i2c", i2c_clk) + _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) + _REGISTER_CLOCK(NULL, "owire", owire_clk) + _REGISTER_CLOCK(NULL, "rtc", rtc_clk) +}; + +/* + * must be called very early to get information about the + * available clock rate when the timer framework starts + */ +int __init mx21_clocks_init(unsigned long lref, unsigned long href) +{ + int i; + u32 cscr; + + external_low_reference = lref; + external_high_reference = href; + + /* detect clock reference for both system PLL */ + cscr = CSCR(); + if (cscr & CCM_CSCR_MCU) + mpll_clk.parent = &ckih_clk; + else + mpll_clk.parent = &fpm_clk; + + if (cscr & CCM_CSCR_SP) + spll_clk.parent = &ckih_clk; + else + spll_clk.parent = &fpm_clk; + + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + + /* Turn off all clock gates */ + __raw_writel(0, CCM_PCCR0); + __raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1); + + /* This turns of the serial PLL as well */ + spll_clk.disable(&spll_clk); + + /* This will propagate to all children and init all the clock rates. */ + clk_enable(&per_clk[0]); + clk_enable(&gpio_clk); + +#ifdef CONFIG_DEBUG_LL_CONSOLE + clk_enable(&uart_clk[0]); +#endif + + mxc_timer_init(&gpt_clk[0]); + return 0; +} diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index c69896d011a..3f7280c490f 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -1,6 +1,7 @@ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -20,23 +21,60 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/spinlock.h> -#include <mach/clock.h> -#include <mach/common.h> +#include <asm/clkdev.h> #include <asm/div64.h> -#include "crm_regs.h" - -static struct clk ckil_clk; -static struct clk mpll_clk; -static struct clk mpll_main_clk[]; -static struct clk spll_clk; - -static int _clk_enable(struct clk *clk) +#include <mach/clock.h> +#include <mach/common.h> +#include <mach/hardware.h> + +/* Register offsets */ +#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) +#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) +#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) +#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) +#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) +#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) +#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) +#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) +#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) +#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) +#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) +#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) +#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) +#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) + +#define CCM_CSCR_UPDATE_DIS (1 << 31) +#define CCM_CSCR_SSI2 (1 << 23) +#define CCM_CSCR_SSI1 (1 << 22) +#define CCM_CSCR_VPU (1 << 21) +#define CCM_CSCR_MSHC (1 << 20) +#define CCM_CSCR_SPLLRES (1 << 19) +#define CCM_CSCR_MPLLRES (1 << 18) +#define CCM_CSCR_SP (1 << 17) +#define CCM_CSCR_MCU (1 << 16) +#define CCM_CSCR_OSC26MDIV (1 << 4) +#define CCM_CSCR_OSC26M (1 << 3) +#define CCM_CSCR_FPM (1 << 2) +#define CCM_CSCR_SPEN (1 << 1) +#define CCM_CSCR_MPEN (1 << 0) + +/* i.MX27 TO 2+ */ +#define CCM_CSCR_ARM_SRC (1 << 15) + +#define CCM_SPCTL1_LF (1 << 15) +#define CCM_SPCTL1_BRMO (1 << 6) + +static struct clk mpll_main1_clk, mpll_main2_clk; + +static int clk_pccr_enable(struct clk *clk) { unsigned long reg; + if (!clk->enable_reg) + return 0; + reg = __raw_readl(clk->enable_reg); reg |= 1 << clk->enable_shift; __raw_writel(reg, clk->enable_reg); @@ -44,16 +82,19 @@ static int _clk_enable(struct clk *clk) return 0; } -static void _clk_disable(struct clk *clk) +static void clk_pccr_disable(struct clk *clk) { unsigned long reg; + if (!clk->enable_reg) + return; + reg = __raw_readl(clk->enable_reg); reg &= ~(1 << clk->enable_shift); __raw_writel(reg, clk->enable_reg); } -static int _clk_spll_enable(struct clk *clk) +static int clk_spll_enable(struct clk *clk) { unsigned long reg; @@ -61,13 +102,12 @@ static int _clk_spll_enable(struct clk *clk) reg |= CCM_CSCR_SPEN; __raw_writel(reg, CCM_CSCR); - while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0) - ; + while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF)); return 0; } -static void _clk_spll_disable(struct clk *clk) +static void clk_spll_disable(struct clk *clk) { unsigned long reg; @@ -76,192 +116,30 @@ static void _clk_spll_disable(struct clk *clk) __raw_writel(reg, CCM_CSCR); } -static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1) -{ - unsigned long reg; - - reg = __raw_readl(CCM_PCCR0); - reg |= mask0; - __raw_writel(reg, CCM_PCCR0); - - reg = __raw_readl(CCM_PCCR1); - reg |= mask1; - __raw_writel(reg, CCM_PCCR1); - -} - -static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1) -{ - unsigned long reg; - - reg = __raw_readl(CCM_PCCR0); - reg &= ~mask0; - __raw_writel(reg, CCM_PCCR0); - - reg = __raw_readl(CCM_PCCR1); - reg &= ~mask1; - __raw_writel(reg, CCM_PCCR1); -} - -static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0) -{ - unsigned long reg; - - reg = __raw_readl(CCM_PCCR1); - reg |= mask1; - __raw_writel(reg, CCM_PCCR1); - - reg = __raw_readl(CCM_PCCR0); - reg |= mask0; - __raw_writel(reg, CCM_PCCR0); -} - -static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0) -{ - unsigned long reg; - - reg = __raw_readl(CCM_PCCR1); - reg &= ~mask1; - __raw_writel(reg, CCM_PCCR1); - - reg = __raw_readl(CCM_PCCR0); - reg &= ~mask0; - __raw_writel(reg, CCM_PCCR0); -} - -static int _clk_dma_enable(struct clk *clk) -{ - _clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK); - - return 0; -} - -static void _clk_dma_disable(struct clk *clk) -{ - _clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK); -} - -static int _clk_rtic_enable(struct clk *clk) -{ - _clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK); - - return 0; -} - -static void _clk_rtic_disable(struct clk *clk) -{ - _clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK); -} - -static int _clk_emma_enable(struct clk *clk) -{ - _clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK); - - return 0; -} - -static void _clk_emma_disable(struct clk *clk) -{ - _clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK); -} - -static int _clk_slcdc_enable(struct clk *clk) -{ - _clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK); - - return 0; -} - -static void _clk_slcdc_disable(struct clk *clk) -{ - _clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK); -} - -static int _clk_fec_enable(struct clk *clk) -{ - _clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK); - - return 0; -} - -static void _clk_fec_disable(struct clk *clk) -{ - _clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK); -} - -static int _clk_vpu_enable(struct clk *clk) -{ - unsigned long reg; - - reg = __raw_readl(CCM_PCCR1); - reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK; - __raw_writel(reg, CCM_PCCR1); - - return 0; -} - -static void _clk_vpu_disable(struct clk *clk) +static int clk_cpu_set_parent(struct clk *clk, struct clk *parent) { - unsigned long reg; - - reg = __raw_readl(CCM_PCCR1); - reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK); - __raw_writel(reg, CCM_PCCR1); -} - -static int _clk_sahara2_enable(struct clk *clk) -{ - _clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK); - - return 0; -} - -static void _clk_sahara2_disable(struct clk *clk) -{ - _clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK); -} - -static int _clk_mstick1_enable(struct clk *clk) -{ - _clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK); - - return 0; -} - -static void _clk_mstick1_disable(struct clk *clk) -{ - _clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK); -} - -#define CSCR() (__raw_readl(CCM_CSCR)) -#define PCDR0() (__raw_readl(CCM_PCDR0)) -#define PCDR1() (__raw_readl(CCM_PCDR1)) - -static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent) -{ - int cscr = CSCR(); + int cscr = __raw_readl(CCM_CSCR); if (clk->parent == parent) return 0; if (mx27_revision() >= CHIP_REV_2_0) { - if (parent == &mpll_main_clk[0]) { + if (parent == &mpll_main1_clk) { cscr |= CCM_CSCR_ARM_SRC; } else { - if (parent == &mpll_main_clk[1]) + if (parent == &mpll_main2_clk) cscr &= ~CCM_CSCR_ARM_SRC; else return -EINVAL; } __raw_writel(cscr, CCM_CSCR); - } else - return -ENODEV; - - clk->parent = parent; - return 0; + clk->parent = parent; + return 0; + } + return -ENODEV; } -static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate) +static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate) { int div; unsigned long parent_rate; @@ -278,7 +156,7 @@ static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate) return parent_rate / div; } -static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate) +static int set_rate_cpu(struct clk *clk, unsigned long rate) { unsigned int div; uint32_t reg; @@ -295,19 +173,18 @@ static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate) reg = __raw_readl(CCM_CSCR); if (mx27_revision() >= CHIP_REV_2_0) { - reg &= ~CCM_CSCR_ARM_MASK; - reg |= div << CCM_CSCR_ARM_OFFSET; - reg &= ~0x06; - __raw_writel(reg | 0x80000000, CCM_CSCR); + reg &= ~(3 << 12); + reg |= div << 12; + reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN); + __raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR); } else { - printk(KERN_ERR "Cant set CPU frequency!\n"); + printk(KERN_ERR "Can't set CPU frequency!\n"); } return 0; } -static unsigned long _clk_perclkx_round_rate(struct clk *clk, - unsigned long rate) +static unsigned long round_rate_per(struct clk *clk, unsigned long rate) { u32 div; unsigned long parent_rate; @@ -324,7 +201,7 @@ static unsigned long _clk_perclkx_round_rate(struct clk *clk, return parent_rate / div; } -static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) +static int set_rate_per(struct clk *clk, unsigned long rate) { u32 reg; u32 div; @@ -340,84 +217,65 @@ static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; div--; - reg = - __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK << - (clk->id << 3)); + reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3)); reg |= div << (clk->id << 3); __raw_writel(reg, CCM_PCDR1); return 0; } -static unsigned long _clk_usb_recalc(struct clk *clk) +static unsigned long get_rate_usb(struct clk *clk) { unsigned long usb_pdf; unsigned long parent_rate; parent_rate = clk_get_rate(clk->parent); - usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET; + usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7; return parent_rate / (usb_pdf + 1U); } -static unsigned long _clk_ssi1_recalc(struct clk *clk) +static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf) { - unsigned long ssi1_pdf; unsigned long parent_rate; parent_rate = clk_get_rate(clk->parent); - ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >> - CCM_PCDR0_SSI1BAUDDIV_OFFSET; - if (mx27_revision() >= CHIP_REV_2_0) - ssi1_pdf += 4; + pdf += 4; /* MX27 TO2+ */ else - ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf; + pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */ - return 2UL * parent_rate / ssi1_pdf; + return 2UL * parent_rate / pdf; } -static unsigned long _clk_ssi2_recalc(struct clk *clk) +static unsigned long get_rate_ssi1(struct clk *clk) { - unsigned long ssi2_pdf; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >> - CCM_PCDR0_SSI2BAUDDIV_OFFSET; - - if (mx27_revision() >= CHIP_REV_2_0) - ssi2_pdf += 4; - else - ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf; + return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f); +} - return 2UL * parent_rate / ssi2_pdf; +static unsigned long get_rate_ssi2(struct clk *clk) +{ + return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f); } -static unsigned long _clk_nfc_recalc(struct clk *clk) +static unsigned long get_rate_nfc(struct clk *clk) { unsigned long nfc_pdf; unsigned long parent_rate; parent_rate = clk_get_rate(clk->parent); - if (mx27_revision() >= CHIP_REV_2_0) { - nfc_pdf = - (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >> - CCM_PCDR0_NFCDIV2_OFFSET; - } else { - nfc_pdf = - (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >> - CCM_PCDR0_NFCDIV_OFFSET; - } + if (mx27_revision() >= CHIP_REV_2_0) + nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf; + else + nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf; return parent_rate / (nfc_pdf + 1); } -static unsigned long _clk_vpu_recalc(struct clk *clk) +static unsigned long get_rate_vpu(struct clk *clk) { unsigned long vpu_pdf; unsigned long parent_rate; @@ -425,25 +283,27 @@ static unsigned long _clk_vpu_recalc(struct clk *clk) parent_rate = clk_get_rate(clk->parent); if (mx27_revision() >= CHIP_REV_2_0) { - vpu_pdf = - (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >> - CCM_PCDR0_VPUDIV2_OFFSET; + vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f; vpu_pdf += 4; } else { - vpu_pdf = - (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >> - CCM_PCDR0_VPUDIV_OFFSET; + vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf; vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf; } + return 2UL * parent_rate / vpu_pdf; } -static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate) +static unsigned long round_rate_parent(struct clk *clk, unsigned long rate) { return clk->parent->round_rate(clk->parent, rate); } -static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) +static unsigned long get_rate_parent(struct clk *clk) +{ + return clk_get_rate(clk->parent); +} + +static int set_rate_parent(struct clk *clk, unsigned long rate) { return clk->parent->set_rate(clk->parent, rate); } @@ -451,1112 +311,380 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) /* in Hz */ static unsigned long external_high_reference = 26000000; -static unsigned long get_high_reference_clock_rate(struct clk *clk) +static unsigned long get_rate_high_reference(struct clk *clk) { return external_high_reference; } -/* - * the high frequency external clock reference - * Default case is 26MHz. Could be changed at runtime - * with a call to change_external_high_reference() - */ -static struct clk ckih_clk = { - .name = "ckih", - .get_rate = get_high_reference_clock_rate, -}; - /* in Hz */ static unsigned long external_low_reference = 32768; -static unsigned long get_low_reference_clock_rate(struct clk *clk) +static unsigned long get_rate_low_reference(struct clk *clk) { return external_low_reference; } -/* - * the low frequency external clock reference - * Default case is 32.768kHz Could be changed at runtime - * with a call to change_external_low_reference() - */ -static struct clk ckil_clk = { - .name = "ckil", - .get_rate = get_low_reference_clock_rate, -}; - -static unsigned long get_mpll_clk(struct clk *clk) +static unsigned long get_rate_fpm(struct clk *clk) { - uint32_t reg; - unsigned long ref_clk; - unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; - unsigned long long temp; - - ref_clk = clk_get_rate(clk->parent); - - reg = __raw_readl(CCM_MPCTL0); - pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET; - mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET; - mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET; - mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET; - - mfi = (mfi <= 5) ? 5 : mfi; - temp = 2LL * ref_clk * mfn; - do_div(temp, mfd + 1); - temp = 2LL * ref_clk * mfi + temp; - do_div(temp, pdf + 1); - - return (unsigned long)temp; + return clk_get_rate(clk->parent) * 1024; } -static struct clk mpll_clk = { - .name = "mpll", - .parent = &ckih_clk, - .get_rate = get_mpll_clk, -}; +static unsigned long get_rate_mpll(struct clk *clk) +{ + return mxc_decode_pll(__raw_readl(CCM_MPCTL0), + clk_get_rate(clk->parent)); +} -static unsigned long _clk_mpll_main_get_rate(struct clk *clk) +static unsigned long get_rate_mpll_main(struct clk *clk) { unsigned long parent_rate; parent_rate = clk_get_rate(clk->parent); /* i.MX27 TO2: - * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2 - * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3 + * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2 + * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3 */ - if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1) return 2UL * parent_rate / 3UL; return parent_rate; } -static struct clk mpll_main_clk[] = { - { - /* For i.MX27 TO2, it is the MPLL path 1 of ARM core - * It provide the clock source whose rate is same as MPLL - */ - .name = "mpll_main", - .id = 0, - .parent = &mpll_clk, - .get_rate = _clk_mpll_main_get_rate - }, { - /* For i.MX27 TO2, it is the MPLL path 2 of ARM core - * It provide the clock source whose rate is same MPLL * 2/3 - */ - .name = "mpll_main", - .id = 1, - .parent = &mpll_clk, - .get_rate = _clk_mpll_main_get_rate - } -}; - -static unsigned long get_spll_clk(struct clk *clk) +static unsigned long get_rate_spll(struct clk *clk) { uint32_t reg; - unsigned long ref_clk; - unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; - unsigned long long temp; + unsigned long rate; - ref_clk = clk_get_rate(clk->parent); + rate = clk_get_rate(clk->parent); reg = __raw_readl(CCM_SPCTL0); - /*TODO: This is TO2 Bug */ + + /* On TO2 we have to write the value back. Otherwise we + * read 0 from this register the next time. + */ if (mx27_revision() >= CHIP_REV_2_0) __raw_writel(reg, CCM_SPCTL0); - pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET; - mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET; - mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET; - mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET; - - mfi = (mfi <= 5) ? 5 : mfi; - temp = 2LL * ref_clk * mfn; - do_div(temp, mfd + 1); - temp = 2LL * ref_clk * mfi + temp; - do_div(temp, pdf + 1); - - return (unsigned long)temp; + return mxc_decode_pll(reg, rate); } -static struct clk spll_clk = { - .name = "spll", - .parent = &ckih_clk, - .get_rate = get_spll_clk, - .enable = _clk_spll_enable, - .disable = _clk_spll_disable, -}; - -static unsigned long get_cpu_clk(struct clk *clk) +static unsigned long get_rate_cpu(struct clk *clk) { u32 div; unsigned long rate; if (mx27_revision() >= CHIP_REV_2_0) - div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET; + div = (__raw_readl(CCM_CSCR) >> 12) & 0x3; else - div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET; + div = (__raw_readl(CCM_CSCR) >> 13) & 0x7; rate = clk_get_rate(clk->parent); return rate / (div + 1); } -static struct clk cpu_clk = { - .name = "cpu_clk", - .parent = &mpll_main_clk[1], - .set_parent = _clk_cpu_set_parent, - .round_rate = _clk_cpu_round_rate, - .get_rate = get_cpu_clk, - .set_rate = _clk_cpu_set_rate, -}; - -static unsigned long get_ahb_clk(struct clk *clk) +static unsigned long get_rate_ahb(struct clk *clk) { - unsigned long rate; - unsigned long bclk_pdf; + unsigned long rate, bclk_pdf; if (mx27_revision() >= CHIP_REV_2_0) - bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK) - >> CCM_CSCR_AHB_OFFSET; + bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3; else - bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK) - >> CCM_CSCR_BCLK_OFFSET; + bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf; rate = clk_get_rate(clk->parent); return rate / (bclk_pdf + 1); } -static struct clk ahb_clk = { - .name = "ahb_clk", - .parent = &mpll_main_clk[1], - .get_rate = get_ahb_clk, -}; - -static unsigned long get_ipg_clk(struct clk *clk) +static unsigned long get_rate_ipg(struct clk *clk) { - unsigned long rate; - unsigned long ipg_pdf; + unsigned long rate, ipg_pdf; if (mx27_revision() >= CHIP_REV_2_0) return clk_get_rate(clk->parent); else - ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET; + ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1; rate = clk_get_rate(clk->parent); return rate / (ipg_pdf + 1); } -static struct clk ipg_clk = { - .name = "ipg_clk", - .parent = &ahb_clk, - .get_rate = get_ipg_clk, -}; - -static unsigned long _clk_perclkx_recalc(struct clk *clk) +static unsigned long get_rate_per(struct clk *clk) { - unsigned long perclk_pdf; - unsigned long parent_rate; + unsigned long perclk_pdf, parent_rate; parent_rate = clk_get_rate(clk->parent); if (clk->id < 0 || clk->id > 3) return 0; - perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK; + perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f; return parent_rate / (perclk_pdf + 1); } -static struct clk per_clk[] = { - { - .name = "per_clk", - .id = 0, - .parent = &mpll_main_clk[1], - .get_rate = _clk_perclkx_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_PERCLK1_OFFSET, - .disable = _clk_disable, - }, { - .name = "per_clk", - .id = 1, - .parent = &mpll_main_clk[1], - .get_rate = _clk_perclkx_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_PERCLK2_OFFSET, - .disable = _clk_disable, - }, { - .name = "per_clk", - .id = 2, - .parent = &mpll_main_clk[1], - .round_rate = _clk_perclkx_round_rate, - .set_rate = _clk_perclkx_set_rate, - .get_rate = _clk_perclkx_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_PERCLK3_OFFSET, - .disable = _clk_disable, - }, { - .name = "per_clk", - .id = 3, - .parent = &mpll_main_clk[1], - .round_rate = _clk_perclkx_round_rate, - .set_rate = _clk_perclkx_set_rate, - .get_rate = _clk_perclkx_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_PERCLK4_OFFSET, - .disable = _clk_disable, - }, -}; - -struct clk uart1_clk[] = { - { - .name = "uart_clk", - .id = 0, - .parent = &per_clk[0], - .secondary = &uart1_clk[1], - }, { - .name = "uart_ipg_clk", - .id = 0, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_UART1_OFFSET, - .disable = _clk_disable, - }, -}; - -struct clk uart2_clk[] = { - { - .name = "uart_clk", - .id = 1, - .parent = &per_clk[0], - .secondary = &uart2_clk[1], - }, { - .name = "uart_ipg_clk", - .id = 1, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_UART2_OFFSET, - .disable = _clk_disable, - }, -}; - -struct clk uart3_clk[] = { - { - .name = "uart_clk", - .id = 2, - .parent = &per_clk[0], - .secondary = &uart3_clk[1], - }, { - .name = "uart_ipg_clk", - .id = 2, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_UART3_OFFSET, - .disable = _clk_disable, - }, -}; - -struct clk uart4_clk[] = { - { - .name = "uart_clk", - .id = 3, - .parent = &per_clk[0], - .secondary = &uart4_clk[1], - }, { - .name = "uart_ipg_clk", - .id = 3, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_UART4_OFFSET, - .disable = _clk_disable, - }, -}; - -struct clk uart5_clk[] = { - { - .name = "uart_clk", - .id = 4, - .parent = &per_clk[0], - .secondary = &uart5_clk[1], - }, { - .name = "uart_ipg_clk", - .id = 4, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_UART5_OFFSET, - .disable = _clk_disable, - }, -}; - -struct clk uart6_clk[] = { - { - .name = "uart_clk", - .id = 5, - .parent = &per_clk[0], - .secondary = &uart6_clk[1], - }, { - .name = "uart_ipg_clk", - .id = 5, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_UART6_OFFSET, - .disable = _clk_disable, - }, -}; - -static struct clk gpt1_clk[] = { - { - .name = "gpt_clk", - .id = 0, - .parent = &per_clk[0], - .secondary = &gpt1_clk[1], - }, { - .name = "gpt_ipg_clk", - .id = 0, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_GPT1_OFFSET, - .disable = _clk_disable, - }, -}; - -static struct clk gpt2_clk[] = { - { - .name = "gpt_clk", - .id = 1, - .parent = &per_clk[0], - .secondary = &gpt2_clk[1], - }, { - .name = "gpt_ipg_clk", - .id = 1, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_GPT2_OFFSET, - .disable = _clk_disable, - }, -}; - -static struct clk gpt3_clk[] = { - { - .name = "gpt_clk", - .id = 2, - .parent = &per_clk[0], - .secondary = &gpt3_clk[1], - }, { - .name = "gpt_ipg_clk", - .id = 2, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_GPT3_OFFSET, - .disable = _clk_disable, - }, -}; - -static struct clk gpt4_clk[] = { - { - .name = "gpt_clk", - .id = 3, - .parent = &per_clk[0], - .secondary = &gpt4_clk[1], - }, { - .name = "gpt_ipg_clk", - .id = 3, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_GPT4_OFFSET, - .disable = _clk_disable, - }, -}; - -static struct clk gpt5_clk[] = { - { - .name = "gpt_clk", - .id = 4, - .parent = &per_clk[0], - .secondary = &gpt5_clk[1], - }, { - .name = "gpt_ipg_clk", - .id = 4, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_GPT5_OFFSET, - .disable = _clk_disable, - }, +/* + * the high frequency external clock reference + * Default case is 26MHz. Could be changed at runtime + * with a call to change_external_high_reference() + */ +static struct clk ckih_clk = { + .get_rate = get_rate_high_reference, }; -static struct clk gpt6_clk[] = { - { - .name = "gpt_clk", - .id = 5, - .parent = &per_clk[0], - .secondary = &gpt6_clk[1], - }, { - .name = "gpt_ipg_clk", - .id = 5, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_GPT6_OFFSET, - .disable = _clk_disable, - }, +static struct clk mpll_clk = { + .parent = &ckih_clk, + .get_rate = get_rate_mpll, }; -static struct clk pwm_clk[] = { - { - .name = "pwm_clk", - .parent = &per_clk[0], - .secondary = &pwm_clk[1], - }, { - .name = "pwm_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_PWM_OFFSET, - .disable = _clk_disable, - }, +/* For i.MX27 TO2, it is the MPLL path 1 of ARM core + * It provides the clock source whose rate is same as MPLL + */ +static struct clk mpll_main1_clk = { + .id = 0, + .parent = &mpll_clk, + .get_rate = get_rate_mpll_main, }; -static struct clk sdhc1_clk[] = { - { - .name = "sdhc_clk", - .id = 0, - .parent = &per_clk[1], - .secondary = &sdhc1_clk[1], - }, { - .name = "sdhc_ipg_clk", - .id = 0, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_SDHC1_OFFSET, - .disable = _clk_disable, - }, +/* For i.MX27 TO2, it is the MPLL path 2 of ARM core + * It provides the clock source whose rate is same MPLL * 2 / 3 + */ +static struct clk mpll_main2_clk = { + .id = 1, + .parent = &mpll_clk, + .get_rate = get_rate_mpll_main, }; -static struct clk sdhc2_clk[] = { - { - .name = "sdhc_clk", - .id = 1, - .parent = &per_clk[1], - .secondary = &sdhc2_clk[1], - }, { - .name = "sdhc_ipg_clk", - .id = 1, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_SDHC2_OFFSET, - .disable = _clk_disable, - }, +static struct clk ahb_clk = { + .parent = &mpll_main2_clk, + .get_rate = get_rate_ahb, }; -static struct clk sdhc3_clk[] = { - { - .name = "sdhc_clk", - .id = 2, - .parent = &per_clk[1], - .secondary = &sdhc3_clk[1], - }, { - .name = "sdhc_ipg_clk", - .id = 2, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_SDHC3_OFFSET, - .disable = _clk_disable, - }, +static struct clk ipg_clk = { + .parent = &ahb_clk, + .get_rate = get_rate_ipg, }; -static struct clk cspi1_clk[] = { - { - .name = "cspi_clk", - .id = 0, - .parent = &per_clk[1], - .secondary = &cspi1_clk[1], - }, { - .name = "cspi_ipg_clk", - .id = 0, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_CSPI1_OFFSET, - .disable = _clk_disable, - }, +static struct clk cpu_clk = { + .parent = &mpll_main2_clk, + .set_parent = clk_cpu_set_parent, + .round_rate = round_rate_cpu, + .get_rate = get_rate_cpu, + .set_rate = set_rate_cpu, }; -static struct clk cspi2_clk[] = { - { - .name = "cspi_clk", - .id = 1, - .parent = &per_clk[1], - .secondary = &cspi2_clk[1], - }, { - .name = "cspi_ipg_clk", - .id = 1, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_CSPI2_OFFSET, - .disable = _clk_disable, - }, +static struct clk spll_clk = { + .parent = &ckih_clk, + .get_rate = get_rate_spll, + .enable = clk_spll_enable, + .disable = clk_spll_disable, }; -static struct clk cspi3_clk[] = { - { - .name = "cspi_clk", - .id = 2, - .parent = &per_clk[1], - .secondary = &cspi3_clk[1], - }, { - .name = "cspi_ipg_clk", - .id = 2, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_CSPI3_OFFSET, - .disable = _clk_disable, - }, +/* + * the low frequency external clock reference + * Default case is 32.768kHz. + */ +static struct clk ckil_clk = { + .get_rate = get_rate_low_reference, }; -static struct clk lcdc_clk[] = { - { - .name = "lcdc_clk", - .parent = &per_clk[2], - .secondary = &lcdc_clk[1], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, - }, { - .name = "lcdc_ipg_clk", - .parent = &ipg_clk, - .secondary = &lcdc_clk[2], - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_LCDC_OFFSET, - .disable = _clk_disable, - }, { - .name = "lcdc_ahb_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET, - .disable = _clk_disable, - }, +/* Output of frequency pre multiplier */ +static struct clk fpm_clk = { + .parent = &ckil_clk, + .get_rate = get_rate_fpm, }; -static struct clk csi_clk[] = { - { - .name = "csi_perclk", - .parent = &per_clk[3], - .secondary = &csi_clk[1], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, - }, { - .name = "csi_ahb_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET, - .disable = _clk_disable, - }, -}; +#define PCCR0 CCM_PCCR0 +#define PCCR1 CCM_PCCR1 -static struct clk usb_clk[] = { - { - .name = "usb_clk", - .parent = &spll_clk, - .get_rate = _clk_usb_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_USBOTG_OFFSET, - .disable = _clk_disable, - }, { - .name = "usb_ahb_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET, - .disable = _clk_disable, +#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .enable = clk_pccr_enable, \ + .disable = clk_pccr_disable, \ + .secondary = s, \ + .parent = p, \ } -}; -static struct clk ssi1_clk[] = { - { - .name = "ssi_clk", - .id = 0, - .parent = &mpll_main_clk[1], - .secondary = &ssi1_clk[1], - .get_rate = _clk_ssi1_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET, - .disable = _clk_disable, - }, { - .name = "ssi_ipg_clk", - .id = 0, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET, - .disable = _clk_disable, - }, -}; +#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = get_rate_##getsetround, \ + .set_rate = set_rate_##getsetround, \ + .round_rate = round_rate_##getsetround, \ + .enable = clk_pccr_enable, \ + .disable = clk_pccr_disable, \ + .secondary = s, \ + .parent = p, \ + } -static struct clk ssi2_clk[] = { - { - .name = "ssi_clk", - .id = 1, - .parent = &mpll_main_clk[1], - .secondary = &ssi2_clk[1], - .get_rate = _clk_ssi2_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET, - .disable = _clk_disable, - }, { - .name = "ssi_ipg_clk", - .id = 1, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET, - .disable = _clk_disable, +/* Forward declaration to keep the following list in order */ +static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1, + dma_clk1, lcdc_clk2, vpu_clk1; + +/* All clocks we can gate through PCCRx in the order of PCCRx bits */ +DEFINE_CLOCK(ssi2_clk1, 1, PCCR0, 0, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(ssi1_clk1, 0, PCCR0, 1, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(slcdc_clk, 0, PCCR0, 2, NULL, &slcdc_clk1, &ahb_clk); +DEFINE_CLOCK(sdhc3_clk1, 0, PCCR0, 3, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(sdhc2_clk1, 0, PCCR0, 4, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(sdhc1_clk1, 0, PCCR0, 5, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(scc_clk, 0, PCCR0, 6, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(sahara2_clk, 0, PCCR0, 7, NULL, &sahara2_clk1, &ahb_clk); +DEFINE_CLOCK(rtic_clk, 0, PCCR0, 8, NULL, &rtic_clk1, &ahb_clk); +DEFINE_CLOCK(rtc_clk, 0, PCCR0, 9, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(pwm_clk1, 0, PCCR0, 11, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(owire_clk, 0, PCCR0, 12, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(mstick_clk1, 0, PCCR0, 13, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(lcdc_clk1, 0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk); +DEFINE_CLOCK(kpp_clk, 0, PCCR0, 15, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(iim_clk, 0, PCCR0, 16, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(i2c2_clk, 1, PCCR0, 17, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(i2c1_clk, 0, PCCR0, 18, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(gpt6_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(gpt5_clk1, 0, PCCR0, 20, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(gpt4_clk1, 0, PCCR0, 21, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(gpt3_clk1, 0, PCCR0, 22, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(gpt2_clk1, 0, PCCR0, 23, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(gpt1_clk1, 0, PCCR0, 24, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(gpio_clk, 0, PCCR0, 25, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(fec_clk, 0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk); +DEFINE_CLOCK(emma_clk, 0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk); +DEFINE_CLOCK(dma_clk, 0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk); +DEFINE_CLOCK(cspi13_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(cspi2_clk1, 0, PCCR0, 30, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(cspi1_clk1, 0, PCCR0, 31, NULL, NULL, &ipg_clk); + +DEFINE_CLOCK(mstick_clk, 0, PCCR1, 2, NULL, &mstick_clk1, &ipg_clk); +DEFINE_CLOCK(nfc_clk, 0, PCCR1, 3, get_rate_nfc, NULL, &cpu_clk); +DEFINE_CLOCK(ssi2_clk, 1, PCCR1, 4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk); +DEFINE_CLOCK(ssi1_clk, 0, PCCR1, 5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk); +DEFINE_CLOCK(vpu_clk, 0, PCCR1, 6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk); +DEFINE_CLOCK1(per4_clk, 3, PCCR1, 7, per, NULL, &mpll_main2_clk); +DEFINE_CLOCK1(per3_clk, 2, PCCR1, 8, per, NULL, &mpll_main2_clk); +DEFINE_CLOCK1(per2_clk, 1, PCCR1, 9, per, NULL, &mpll_main2_clk); +DEFINE_CLOCK1(per1_clk, 0, PCCR1, 10, per, NULL, &mpll_main2_clk); +DEFINE_CLOCK(usb_clk1, 0, PCCR1, 11, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(slcdc_clk1, 0, PCCR1, 12, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(rtic_clk1, 0, PCCR1, 14, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(lcdc_clk2, 0, PCCR1, 15, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(vpu_clk1, 0, PCCR1, 16, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(fec_clk1, 0, PCCR1, 17, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(emma_clk1, 0, PCCR1, 18, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(ata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk); +DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(uart5_clk1, 0, PCCR1, 27, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(uart4_clk1, 0, PCCR1, 28, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(uart3_clk1, 0, PCCR1, 29, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk); + +/* Clocks we cannot directly gate, but drivers need their rates */ +DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk); +DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk); +DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk); +DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk); +DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk); +DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk); +DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk); +DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk); +DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk); +DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk); +DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk); +DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk); +DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk); +DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk); +DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk); +DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk); +DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk); +DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk); +DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk); +DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk); +DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ }, -}; - -static struct clk nfc_clk = { - .name = "nfc_clk", - .parent = &cpu_clk, - .get_rate = _clk_nfc_recalc, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET, - .disable = _clk_disable, -}; - -static struct clk vpu_clk = { - .name = "vpu_clk", - .parent = &mpll_main_clk[1], - .get_rate = _clk_vpu_recalc, - .enable = _clk_vpu_enable, - .disable = _clk_vpu_disable, -}; - -static struct clk dma_clk = { - .name = "dma_clk", - .parent = &ahb_clk, - .enable = _clk_dma_enable, - .disable = _clk_dma_disable, -}; - -static struct clk rtic_clk = { - .name = "rtic_clk", - .parent = &ahb_clk, - .enable = _clk_rtic_enable, - .disable = _clk_rtic_disable, -}; -static struct clk brom_clk = { - .name = "brom_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET, - .disable = _clk_disable, -}; - -static struct clk emma_clk = { - .name = "emma_clk", - .parent = &ahb_clk, - .enable = _clk_emma_enable, - .disable = _clk_emma_disable, -}; - -static struct clk slcdc_clk = { - .name = "slcdc_clk", - .parent = &ahb_clk, - .enable = _clk_slcdc_enable, - .disable = _clk_slcdc_disable, -}; - -static struct clk fec_clk = { - .name = "fec_clk", - .parent = &ahb_clk, - .enable = _clk_fec_enable, - .disable = _clk_fec_disable, -}; - -static struct clk emi_clk = { - .name = "emi_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET, - .disable = _clk_disable, -}; - -static struct clk sahara2_clk = { - .name = "sahara_clk", - .parent = &ahb_clk, - .enable = _clk_sahara2_enable, - .disable = _clk_sahara2_disable, -}; - -static struct clk ata_clk = { - .name = "ata_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET, - .disable = _clk_disable, -}; - -static struct clk mstick1_clk = { - .name = "mstick1_clk", - .parent = &ipg_clk, - .enable = _clk_mstick1_enable, - .disable = _clk_mstick1_disable, -}; - -static struct clk wdog_clk = { - .name = "wdog_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR1_WDT_OFFSET, - .disable = _clk_disable, -}; - -static struct clk gpio_clk = { - .name = "gpio_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR1, - .enable_shift = CCM_PCCR0_GPIO_OFFSET, - .disable = _clk_disable, -}; - -static struct clk i2c_clk[] = { - { - .name = "i2c_clk", - .id = 0, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_I2C1_OFFSET, - .disable = _clk_disable, - }, { - .name = "i2c_clk", - .id = 1, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_I2C2_OFFSET, - .disable = _clk_disable, - }, -}; - -static struct clk iim_clk = { - .name = "iim_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_IIM_OFFSET, - .disable = _clk_disable, -}; - -static struct clk kpp_clk = { - .name = "kpp_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_KPP_OFFSET, - .disable = _clk_disable, -}; - -static struct clk owire_clk = { - .name = "owire_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_OWIRE_OFFSET, - .disable = _clk_disable, -}; - -static struct clk rtc_clk = { - .name = "rtc_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_RTC_OFFSET, - .disable = _clk_disable, -}; - -static struct clk scc_clk = { - .name = "scc_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = CCM_PCCR0, - .enable_shift = CCM_PCCR0_SCC_OFFSET, - .disable = _clk_disable, -}; - -static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate) -{ - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > 8) - div = 8; - - return parent_rate / div; -} - -static int _clk_clko_set_rate(struct clk *clk, unsigned long rate) -{ - u32 reg; - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - - if (div > 8 || div < 1 || ((parent_rate / div) != rate)) - return -EINVAL; - div--; - - reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK; - reg |= div << CCM_PCDR0_CLKODIV_OFFSET; - __raw_writel(reg, CCM_PCDR0); - - return 0; -} - -static unsigned long _clk_clko_recalc(struct clk *clk) -{ - u32 div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >> - CCM_PCDR0_CLKODIV_OFFSET; - div++; - - return parent_rate / div; -} - -static int _clk_clko_set_parent(struct clk *clk, struct clk *parent) -{ - u32 reg; - - reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK; - - if (parent == &ckil_clk) - reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &ckih_clk) - reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == mpll_clk.parent) - reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == spll_clk.parent) - reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &mpll_clk) - reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &spll_clk) - reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &cpu_clk) - reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &ahb_clk) - reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &ipg_clk) - reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &per_clk[0]) - reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &per_clk[1]) - reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &per_clk[2]) - reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &per_clk[3]) - reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &ssi1_clk[0]) - reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &ssi2_clk[0]) - reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &nfc_clk) - reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &mstick1_clk) - reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &vpu_clk) - reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET; - else if (parent == &usb_clk[0]) - reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET; - else - return -EINVAL; - - __raw_writel(reg, CCM_CCSR); - - return 0; -} - -static int _clk_clko_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN; - __raw_writel(reg, CCM_PCDR0); - - return 0; -} - -static void _clk_clko_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN; - __raw_writel(reg, CCM_PCDR0); -} - -static struct clk clko_clk = { - .name = "clko_clk", - .get_rate = _clk_clko_recalc, - .set_rate = _clk_clko_set_rate, - .round_rate = _clk_clko_round_rate, - .set_parent = _clk_clko_set_parent, - .enable = _clk_clko_enable, - .disable = _clk_clko_disable, -}; - -static struct clk *mxc_clks[] = { - &ckih_clk, - &ckil_clk, - &mpll_clk, - &mpll_main_clk[0], - &mpll_main_clk[1], - &spll_clk, - &cpu_clk, - &ahb_clk, - &ipg_clk, - &per_clk[0], - &per_clk[1], - &per_clk[2], - &per_clk[3], - &clko_clk, - &uart1_clk[0], - &uart1_clk[1], - &uart2_clk[0], - &uart2_clk[1], - &uart3_clk[0], - &uart3_clk[1], - &uart4_clk[0], - &uart4_clk[1], - &uart5_clk[0], - &uart5_clk[1], - &uart6_clk[0], - &uart6_clk[1], - &gpt1_clk[0], - &gpt1_clk[1], - &gpt2_clk[0], - &gpt2_clk[1], - &gpt3_clk[0], - &gpt3_clk[1], - &gpt4_clk[0], - &gpt4_clk[1], - &gpt5_clk[0], - &gpt5_clk[1], - &gpt6_clk[0], - &gpt6_clk[1], - &pwm_clk[0], - &pwm_clk[1], - &sdhc1_clk[0], - &sdhc1_clk[1], - &sdhc2_clk[0], - &sdhc2_clk[1], - &sdhc3_clk[0], - &sdhc3_clk[1], - &cspi1_clk[0], - &cspi1_clk[1], - &cspi2_clk[0], - &cspi2_clk[1], - &cspi3_clk[0], - &cspi3_clk[1], - &lcdc_clk[0], - &lcdc_clk[1], - &lcdc_clk[2], - &csi_clk[0], - &csi_clk[1], - &usb_clk[0], - &usb_clk[1], - &ssi1_clk[0], - &ssi1_clk[1], - &ssi2_clk[0], - &ssi2_clk[1], - &nfc_clk, - &vpu_clk, - &dma_clk, - &rtic_clk, - &brom_clk, - &emma_clk, - &slcdc_clk, - &fec_clk, - &emi_clk, - &sahara2_clk, - &ata_clk, - &mstick1_clk, - &wdog_clk, - &gpio_clk, - &i2c_clk[0], - &i2c_clk[1], - &iim_clk, - &kpp_clk, - &owire_clk, - &rtc_clk, - &scc_clk, -}; - -void __init change_external_low_reference(unsigned long new_ref) -{ - external_low_reference = new_ref; -} - -unsigned long __init clk_early_get_timer_rate(void) -{ - return clk_get_rate(&per_clk[0]); -} - -static void __init probe_mxc_clocks(void) -{ - int i; +static struct clk_lookup lookups[] __initdata = { + _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk) + _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk) + _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk) + _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk) + _REGISTER_CLOCK(NULL, "gpt4", gpt4_clk) + _REGISTER_CLOCK(NULL, "gpt5", gpt5_clk) + _REGISTER_CLOCK(NULL, "gpt6", gpt6_clk) + _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk) + _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) + _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) + _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) + _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk) + _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk) + _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) + _REGISTER_CLOCK(NULL, "csi", csi_clk) + _REGISTER_CLOCK(NULL, "usb", usb_clk) + _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk) + _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) + _REGISTER_CLOCK(NULL, "vpu", vpu_clk) + _REGISTER_CLOCK(NULL, "dma", dma_clk) + _REGISTER_CLOCK(NULL, "rtic", rtic_clk) + _REGISTER_CLOCK(NULL, "brom", brom_clk) + _REGISTER_CLOCK(NULL, "emma", emma_clk) + _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK(NULL, "emi", emi_clk) + _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) + _REGISTER_CLOCK(NULL, "ata", ata_clk) + _REGISTER_CLOCK(NULL, "mstick", mstick_clk) + _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK(NULL, "gpio", gpio_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) + _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) + _REGISTER_CLOCK(NULL, "iim", iim_clk) + _REGISTER_CLOCK(NULL, "kpp", kpp_clk) + _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk) + _REGISTER_CLOCK(NULL, "rtc", rtc_clk) + _REGISTER_CLOCK(NULL, "scc", scc_clk) +}; + +/* Adjust the clock path for TO2 and later */ +static void __init to2_adjust_clocks(void) +{ + unsigned long cscr = __raw_readl(CCM_CSCR); if (mx27_revision() >= CHIP_REV_2_0) { - if (CSCR() & 0x8000) - cpu_clk.parent = &mpll_main_clk[0]; + if (cscr & CCM_CSCR_ARM_SRC) + cpu_clk.parent = &mpll_main1_clk; - if (!(CSCR() & 0x00800000)) - ssi2_clk[0].parent = &spll_clk; + if (!(cscr & CCM_CSCR_SSI2)) + ssi1_clk.parent = &spll_clk; - if (!(CSCR() & 0x00400000)) - ssi1_clk[0].parent = &spll_clk; + if (!(cscr & CCM_CSCR_SSI1)) + ssi1_clk.parent = &spll_clk; - if (!(CSCR() & 0x00200000)) + if (!(cscr & CCM_CSCR_VPU)) vpu_clk.parent = &spll_clk; } else { cpu_clk.parent = &mpll_clk; @@ -1565,11 +693,13 @@ static void __init probe_mxc_clocks(void) cpu_clk.set_rate = NULL; ahb_clk.parent = &mpll_clk; - for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++) - per_clk[i].parent = &mpll_clk; + per1_clk.parent = &mpll_clk; + per2_clk.parent = &mpll_clk; + per3_clk.parent = &mpll_clk; + per4_clk.parent = &mpll_clk; - ssi1_clk[0].parent = &mpll_clk; - ssi2_clk[0].parent = &mpll_clk; + ssi1_clk.parent = &mpll_clk; + ssi2_clk.parent = &mpll_clk; vpu_clk.parent = &mpll_clk; } @@ -1579,47 +709,47 @@ static void __init probe_mxc_clocks(void) * must be called very early to get information about the * available clock rate when the timer framework starts */ -int __init mxc_clocks_init(unsigned long fref) +int __init mx27_clocks_init(unsigned long fref) { - u32 cscr; - struct clk **clkp; + u32 cscr = __raw_readl(CCM_CSCR); + int i; external_high_reference = fref; - /* detect clock reference for both system PLL */ - cscr = CSCR(); + /* detect clock reference for both system PLLs */ if (cscr & CCM_CSCR_MCU) mpll_clk.parent = &ckih_clk; else - mpll_clk.parent = &ckil_clk; + mpll_clk.parent = &fpm_clk; if (cscr & CCM_CSCR_SP) spll_clk.parent = &ckih_clk; else - spll_clk.parent = &ckil_clk; + spll_clk.parent = &fpm_clk; - probe_mxc_clocks(); + to2_adjust_clocks(); - per_clk[0].enable(&per_clk[0]); - gpt1_clk[1].enable(&gpt1_clk[1]); + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); - for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) - clk_register(*clkp); + /* Turn off all clocks we do not need */ + __raw_writel(0, CCM_PCCR0); + __raw_writel((1 << 10) | (1 << 19), CCM_PCCR1); - /* Turn off all possible clocks */ - __raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0); - __raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK, - CCM_PCCR1); spll_clk.disable(&spll_clk); - /* This will propagate to all children and init all the clock rates */ - - clk_enable(&emi_clk); + /* enable basic clocks */ + clk_enable(&per1_clk); clk_enable(&gpio_clk); + clk_enable(&emi_clk); clk_enable(&iim_clk); - clk_enable(&gpt1_clk[0]); + #ifdef CONFIG_DEBUG_LL_CONSOLE - clk_enable(&uart1_clk[0]); + clk_enable(&uart1_clk); #endif + + mxc_timer_init(&gpt1_clk); + return 0; } + diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c index 239308fe665..d9e3bf9644c 100644 --- a/arch/arm/mach-mx2/cpu_imx27.c +++ b/arch/arm/mach-mx2/cpu_imx27.c @@ -26,11 +26,11 @@ #include <mach/hardware.h> -#include "crm_regs.h" - static int cpu_silicon_rev = -1; static int cpu_partnumber; +#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ + static void query_silicon_parameter(void) { u32 val; diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h index 94644cd0a0f..749de76b3f9 100644 --- a/arch/arm/mach-mx2/crm_regs.h +++ b/arch/arm/mach-mx2/crm_regs.h @@ -38,42 +38,36 @@ #define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) #define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) -#define CCM_CSCR_USB_OFFSET 28 -#define CCM_CSCR_USB_MASK (0x7 << 28) +#define CCM_CSCR_PRESC_OFFSET 29 +#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET) + +#define CCM_CSCR_USB_OFFSET 26 +#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET) #define CCM_CSCR_SD_OFFSET 24 -#define CCM_CSCR_SD_MASK (0x3 << 24) -#define CCM_CSCR_SSI2 (1 << 23) -#define CCM_CSCR_SSI2_OFFSET 23 -#define CCM_CSCR_SSI1 (1 << 22) -#define CCM_CSCR_SSI1_OFFSET 22 -#define CCM_CSCR_VPU (1 << 21) -#define CCM_CSCR_VPU_OFFSET 21 -#define CCM_CSCR_MSHC (1 << 20) -#define CCM_CSCR_SPLLRES (1 << 19) -#define CCM_CSCR_MPLLRES (1 << 18) +#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET) +#define CCM_CSCR_SPLLRES (1 << 22) +#define CCM_CSCR_MPLLRES (1 << 21) +#define CCM_CSCR_SSI2_OFFSET 20 +#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET) +#define CCM_CSCR_SSI1_OFFSET 19 +#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET) +#define CCM_CSCR_FIR_OFFSET 18 +#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET) #define CCM_CSCR_SP (1 << 17) #define CCM_CSCR_MCU (1 << 16) -/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/ -#define CCM_CSCR_ARM_SRC (1 << 15) -#define CCM_CSCR_ARM_OFFSET 12 -#define CCM_CSCR_ARM_MASK (0x3 << 12) -/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/ -#define CCM_CSCR_PRESC_OFFSET 13 -#define CCM_CSCR_PRESC_MASK (0x7 << 13) -#define CCM_CSCR_BCLK_OFFSET 9 -#define CCM_CSCR_BCLK_MASK (0xf << 9) -#define CCM_CSCR_IPDIV_OFFSET 8 -#define CCM_CSCR_IPDIV (1 << 8) -/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/ -#define CCM_CSCR_AHB_OFFSET 8 -#define CCM_CSCR_AHB_MASK (0x3 << 8) -/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_BCLK_OFFSET 10 +#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET) +#define CCM_CSCR_IPDIV_OFFSET 9 +#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET) + #define CCM_CSCR_OSC26MDIV (1 << 4) #define CCM_CSCR_OSC26M (1 << 3) #define CCM_CSCR_FPM (1 << 2) #define CCM_CSCR_SPEN (1 << 1) #define CCM_CSCR_MPEN 1 + + #define CCM_MPCTL0_CPLM (1 << 31) #define CCM_MPCTL0_PD_OFFSET 26 #define CCM_MPCTL0_PD_MASK (0xf << 26) @@ -109,25 +103,14 @@ #define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26 #define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26) -#define CCM_PCDR0_CLKO_EN 25 -#define CCM_PCDR0_CLKODIV_OFFSET 22 -#define CCM_PCDR0_CLKODIV_MASK (0x7 << 22) #define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16 #define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16) -/*The difinition for i.MX27 TO2*/ -#define CCM_PCDR0_VPUDIV2_OFFSET 10 -#define CCM_PCDR0_VPUDIV2_MASK (0x3f << 10) -#define CCM_PCDR0_NFCDIV2_OFFSET 6 -#define CCM_PCDR0_NFCDIV2_MASK (0xf << 6) -#define CCM_PCDR0_MSHCDIV2_MASK 0x3f -/*The difinition for i.MX27 TO2*/ #define CCM_PCDR0_NFCDIV_OFFSET 12 #define CCM_PCDR0_NFCDIV_MASK (0xf << 12) -#define CCM_PCDR0_VPUDIV_OFFSET 8 -#define CCM_PCDR0_VPUDIV_MASK (0xf << 8) -#define CCM_PCDR0_MSHCDIV_OFFSET 0 -#define CCM_PCDR0_MSHCDIV_MASK 0x1f - +#define CCM_PCDR0_48MDIV_OFFSET 5 +#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET) +#define CCM_PCDR0_FIRIDIV_OFFSET 0 +#define CCM_PCDR0_FIRIDIV_MASK 0x1f #define CCM_PCDR1_PERDIV4_OFFSET 24 #define CCM_PCDR1_PERDIV4_MASK (0x3f << 24) #define CCM_PCDR1_PERDIV3_OFFSET 16 @@ -137,133 +120,135 @@ #define CCM_PCDR1_PERDIV1_OFFSET 0 #define CCM_PCDR1_PERDIV1_MASK 0x3f -#define CCM_PCCR0_CSPI1_OFFSET 31 -#define CCM_PCCR0_CSPI1_MASK (1 << 31) -#define CCM_PCCR0_CSPI2_OFFSET 30 -#define CCM_PCCR0_CSPI2_MASK (1 << 30) -#define CCM_PCCR0_CSPI3_OFFSET 29 -#define CCM_PCCR0_CSPI3_MASK (1 << 29) -#define CCM_PCCR0_DMA_OFFSET 28 -#define CCM_PCCR0_DMA_MASK (1 << 28) -#define CCM_PCCR0_EMMA_OFFSET 27 -#define CCM_PCCR0_EMMA_MASK (1 << 27) -#define CCM_PCCR0_FEC_OFFSET 26 -#define CCM_PCCR0_FEC_MASK (1 << 26) -#define CCM_PCCR0_GPIO_OFFSET 25 -#define CCM_PCCR0_GPIO_MASK (1 << 25) -#define CCM_PCCR0_GPT1_OFFSET 24 -#define CCM_PCCR0_GPT1_MASK (1 << 24) -#define CCM_PCCR0_GPT2_OFFSET 23 -#define CCM_PCCR0_GPT2_MASK (1 << 23) -#define CCM_PCCR0_GPT3_OFFSET 22 -#define CCM_PCCR0_GPT3_MASK (1 << 22) -#define CCM_PCCR0_GPT4_OFFSET 21 -#define CCM_PCCR0_GPT4_MASK (1 << 21) -#define CCM_PCCR0_GPT5_OFFSET 20 -#define CCM_PCCR0_GPT5_MASK (1 << 20) -#define CCM_PCCR0_GPT6_OFFSET 19 -#define CCM_PCCR0_GPT6_MASK (1 << 19) -#define CCM_PCCR0_I2C1_OFFSET 18 -#define CCM_PCCR0_I2C1_MASK (1 << 18) -#define CCM_PCCR0_I2C2_OFFSET 17 -#define CCM_PCCR0_I2C2_MASK (1 << 17) -#define CCM_PCCR0_IIM_OFFSET 16 -#define CCM_PCCR0_IIM_MASK (1 << 16) -#define CCM_PCCR0_KPP_OFFSET 15 -#define CCM_PCCR0_KPP_MASK (1 << 15) -#define CCM_PCCR0_LCDC_OFFSET 14 -#define CCM_PCCR0_LCDC_MASK (1 << 14) -#define CCM_PCCR0_MSHC_OFFSET 13 -#define CCM_PCCR0_MSHC_MASK (1 << 13) -#define CCM_PCCR0_OWIRE_OFFSET 12 -#define CCM_PCCR0_OWIRE_MASK (1 << 12) -#define CCM_PCCR0_PWM_OFFSET 11 -#define CCM_PCCR0_PWM_MASK (1 << 11) -#define CCM_PCCR0_RTC_OFFSET 9 -#define CCM_PCCR0_RTC_MASK (1 << 9) -#define CCM_PCCR0_RTIC_OFFSET 8 -#define CCM_PCCR0_RTIC_MASK (1 << 8) -#define CCM_PCCR0_SAHARA_OFFSET 7 -#define CCM_PCCR0_SAHARA_MASK (1 << 7) -#define CCM_PCCR0_SCC_OFFSET 6 -#define CCM_PCCR0_SCC_MASK (1 << 6) -#define CCM_PCCR0_SDHC1_OFFSET 5 -#define CCM_PCCR0_SDHC1_MASK (1 << 5) -#define CCM_PCCR0_SDHC2_OFFSET 4 -#define CCM_PCCR0_SDHC2_MASK (1 << 4) -#define CCM_PCCR0_SDHC3_OFFSET 3 -#define CCM_PCCR0_SDHC3_MASK (1 << 3) -#define CCM_PCCR0_SLCDC_OFFSET 2 -#define CCM_PCCR0_SLCDC_MASK (1 << 2) -#define CCM_PCCR0_SSI1_IPG_OFFSET 1 -#define CCM_PCCR0_SSI1_IPG_MASK (1 << 1) -#define CCM_PCCR0_SSI2_IPG_OFFSET 0 -#define CCM_PCCR0_SSI2_IPG_MASK (1 << 0) +#define CCM_PCCR_HCLK_CSI_OFFSET 31 +#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_DMA_OFFSET 30 +#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_BROM_OFFSET 28 +#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_EMMA_OFFSET 27 +#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_LCDC_OFFSET 26 +#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_SLCDC_OFFSET 25 +#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_USBOTG_OFFSET 24 +#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_BMI_OFFSET 23 +#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK) +#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0 +#define CCM_PCCR_PERCLK4_OFFSET 22 +#define CCM_PCCR_PERCLK4_REG CCM_PCCR0 +#define CCM_PCCR_SLCDC_OFFSET 21 +#define CCM_PCCR_SLCDC_REG CCM_PCCR0 +#define CCM_PCCR_FIRI_BAUD_OFFSET 20 +#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK) +#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_NFC_OFFSET 19 +#define CCM_PCCR_NFC_REG CCM_PCCR0 +#define CCM_PCCR_LCDC_OFFSET 18 +#define CCM_PCCR_LCDC_REG CCM_PCCR0 +#define CCM_PCCR_SSI1_BAUD_OFFSET 17 +#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_SSI2_BAUD_OFFSET 16 +#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_EMMA_OFFSET 15 +#define CCM_PCCR_EMMA_REG CCM_PCCR0 +#define CCM_PCCR_USBOTG_OFFSET 14 +#define CCM_PCCR_USBOTG_REG CCM_PCCR0 +#define CCM_PCCR_DMA_OFFSET 13 +#define CCM_PCCR_DMA_REG CCM_PCCR0 +#define CCM_PCCR_I2C1_OFFSET 12 +#define CCM_PCCR_I2C1_REG CCM_PCCR0 +#define CCM_PCCR_GPIO_OFFSET 11 +#define CCM_PCCR_GPIO_REG CCM_PCCR0 +#define CCM_PCCR_SDHC2_OFFSET 10 +#define CCM_PCCR_SDHC2_REG CCM_PCCR0 +#define CCM_PCCR_SDHC1_OFFSET 9 +#define CCM_PCCR_SDHC1_REG CCM_PCCR0 +#define CCM_PCCR_FIRI_OFFSET 8 +#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK) +#define CCM_PCCR_FIRI_REG CCM_PCCR0 +#define CCM_PCCR_SSI2_IPG_OFFSET 7 +#define CCM_PCCR_SSI2_REG CCM_PCCR0 +#define CCM_PCCR_SSI1_IPG_OFFSET 6 +#define CCM_PCCR_SSI1_REG CCM_PCCR0 +#define CCM_PCCR_CSPI2_OFFSET 5 +#define CCM_PCCR_CSPI2_REG CCM_PCCR0 +#define CCM_PCCR_CSPI1_OFFSET 4 +#define CCM_PCCR_CSPI1_REG CCM_PCCR0 +#define CCM_PCCR_UART4_OFFSET 3 +#define CCM_PCCR_UART4_REG CCM_PCCR0 +#define CCM_PCCR_UART3_OFFSET 2 +#define CCM_PCCR_UART3_REG CCM_PCCR0 +#define CCM_PCCR_UART2_OFFSET 1 +#define CCM_PCCR_UART2_REG CCM_PCCR0 +#define CCM_PCCR_UART1_OFFSET 0 +#define CCM_PCCR_UART1_REG CCM_PCCR0 + +#define CCM_PCCR_OWIRE_OFFSET 31 +#define CCM_PCCR_OWIRE_REG CCM_PCCR1 +#define CCM_PCCR_KPP_OFFSET 30 +#define CCM_PCCR_KPP_REG CCM_PCCR1 +#define CCM_PCCR_RTC_OFFSET 29 +#define CCM_PCCR_RTC_REG CCM_PCCR1 +#define CCM_PCCR_PWM_OFFSET 28 +#define CCM_PCCR_PWM_REG CCM_PCCR1 +#define CCM_PCCR_GPT3_OFFSET 27 +#define CCM_PCCR_GPT3_REG CCM_PCCR1 +#define CCM_PCCR_GPT2_OFFSET 26 +#define CCM_PCCR_GPT2_REG CCM_PCCR1 +#define CCM_PCCR_GPT1_OFFSET 25 +#define CCM_PCCR_GPT1_REG CCM_PCCR1 +#define CCM_PCCR_WDT_OFFSET 24 +#define CCM_PCCR_WDT_REG CCM_PCCR1 +#define CCM_PCCR_CSPI3_OFFSET 23 +#define CCM_PCCR_CSPI3_REG CCM_PCCR1 + +#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET) +#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET) +#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET) +#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET) +#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET) +#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET) +#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET) +#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET) +#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET) +#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET) +#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET) +#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET) +#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET) +#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET) +#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET) +#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET) +#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET) +#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET) +#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET) +#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET) +#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET) +#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET) +#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET) +#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET) +#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET) +#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET) +#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET) +#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET) +#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET) +#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET) +#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET) +#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET) +#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET) +#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET) +#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET) +#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET) +#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET) -#define CCM_PCCR1_UART1_OFFSET 31 -#define CCM_PCCR1_UART1_MASK (1 << 31) -#define CCM_PCCR1_UART2_OFFSET 30 -#define CCM_PCCR1_UART2_MASK (1 << 30) -#define CCM_PCCR1_UART3_OFFSET 29 -#define CCM_PCCR1_UART3_MASK (1 << 29) -#define CCM_PCCR1_UART4_OFFSET 28 -#define CCM_PCCR1_UART4_MASK (1 << 28) -#define CCM_PCCR1_UART5_OFFSET 27 -#define CCM_PCCR1_UART5_MASK (1 << 27) -#define CCM_PCCR1_UART6_OFFSET 26 -#define CCM_PCCR1_UART6_MASK (1 << 26) -#define CCM_PCCR1_USBOTG_OFFSET 25 -#define CCM_PCCR1_USBOTG_MASK (1 << 25) -#define CCM_PCCR1_WDT_OFFSET 24 -#define CCM_PCCR1_WDT_MASK (1 << 24) -#define CCM_PCCR1_HCLK_ATA_OFFSET 23 -#define CCM_PCCR1_HCLK_ATA_MASK (1 << 23) -#define CCM_PCCR1_HCLK_BROM_OFFSET 22 -#define CCM_PCCR1_HCLK_BROM_MASK (1 << 22) -#define CCM_PCCR1_HCLK_CSI_OFFSET 21 -#define CCM_PCCR1_HCLK_CSI_MASK (1 << 21) -#define CCM_PCCR1_HCLK_DMA_OFFSET 20 -#define CCM_PCCR1_HCLK_DMA_MASK (1 << 20) -#define CCM_PCCR1_HCLK_EMI_OFFSET 19 -#define CCM_PCCR1_HCLK_EMI_MASK (1 << 19) -#define CCM_PCCR1_HCLK_EMMA_OFFSET 18 -#define CCM_PCCR1_HCLK_EMMA_MASK (1 << 18) -#define CCM_PCCR1_HCLK_FEC_OFFSET 17 -#define CCM_PCCR1_HCLK_FEC_MASK (1 << 17) -#define CCM_PCCR1_HCLK_VPU_OFFSET 16 -#define CCM_PCCR1_HCLK_VPU_MASK (1 << 16) -#define CCM_PCCR1_HCLK_LCDC_OFFSET 15 -#define CCM_PCCR1_HCLK_LCDC_MASK (1 << 15) -#define CCM_PCCR1_HCLK_RTIC_OFFSET 14 -#define CCM_PCCR1_HCLK_RTIC_MASK (1 << 14) -#define CCM_PCCR1_HCLK_SAHARA_OFFSET 13 -#define CCM_PCCR1_HCLK_SAHARA_MASK (1 << 13) -#define CCM_PCCR1_HCLK_SLCDC_OFFSET 12 -#define CCM_PCCR1_HCLK_SLCDC_MASK (1 << 12) -#define CCM_PCCR1_HCLK_USBOTG_OFFSET 11 -#define CCM_PCCR1_HCLK_USBOTG_MASK (1 << 11) -#define CCM_PCCR1_PERCLK1_OFFSET 10 -#define CCM_PCCR1_PERCLK1_MASK (1 << 10) -#define CCM_PCCR1_PERCLK2_OFFSET 9 -#define CCM_PCCR1_PERCLK2_MASK (1 << 9) -#define CCM_PCCR1_PERCLK3_OFFSET 8 -#define CCM_PCCR1_PERCLK3_MASK (1 << 8) -#define CCM_PCCR1_PERCLK4_OFFSET 7 -#define CCM_PCCR1_PERCLK4_MASK (1 << 7) -#define CCM_PCCR1_VPU_BAUD_OFFSET 6 -#define CCM_PCCR1_VPU_BAUD_MASK (1 << 6) -#define CCM_PCCR1_SSI1_BAUD_OFFSET 5 -#define CCM_PCCR1_SSI1_BAUD_MASK (1 << 5) -#define CCM_PCCR1_SSI2_BAUD_OFFSET 4 -#define CCM_PCCR1_SSI2_BAUD_MASK (1 << 4) -#define CCM_PCCR1_NFC_BAUD_OFFSET 3 -#define CCM_PCCR1_NFC_BAUD_MASK (1 << 3) -#define CCM_PCCR1_MSHC_BAUD_OFFSET 2 -#define CCM_PCCR1_MSHC_BAUD_MASK (1 << 2) #define CCM_CCSR_32KSR (1 << 15) + #define CCM_CCSR_CLKMODE1 (1 << 9) #define CCM_CCSR_CLKMODE0 (1 << 8) + #define CCM_CCSR_CLKOSEL_OFFSET 0 #define CCM_CCSR_CLKOSEL_MASK 0x1f diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 2f9240be1c7..a0f1b367432 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -34,6 +34,10 @@ #include <mach/irqs.h> #include <mach/hardware.h> +#include <mach/common.h> +#include <mach/mmc.h> + +#include "devices.h" /* * Resource definition for the MXC IrDA @@ -225,37 +229,215 @@ struct platform_device mxc_nand_device = { .resource = mxc_nand_resources, }; +/* + * lcdc: + * - i.MX1: the basic controller + * - i.MX21: to be checked + * - i.MX27: like i.MX1, with slightly variations + */ +static struct resource mxc_fb[] = { + { + .start = LCDC_BASE_ADDR, + .end = LCDC_BASE_ADDR + 0xFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = MXC_INT_LCDC, + .end = MXC_INT_LCDC, + .flags = IORESOURCE_IRQ, + } +}; + +/* mxc lcd driver */ +struct platform_device mxc_fb_device = { + .name = "imx-fb", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_fb), + .resource = mxc_fb, + .dev = { + .coherent_dma_mask = 0xFFFFFFFF, + }, +}; + +#ifdef CONFIG_MACH_MX27 +static struct resource mxc_fec_resources[] = { + { + .start = FEC_BASE_ADDR, + .end = FEC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM + }, { + .start = MXC_INT_FEC, + .end = MXC_INT_FEC, + .flags = IORESOURCE_IRQ + }, +}; + +struct platform_device mxc_fec_device = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_fec_resources), + .resource = mxc_fec_resources, +}; +#endif + +static struct resource mxc_i2c_1_resources[] = { + [0] = { + .start = I2C_BASE_ADDR, + .end = I2C_BASE_ADDR + 0x0fff, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_I2C, + .end = MXC_INT_I2C, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device mxc_i2c_device0 = { + .name = "imx-i2c", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_i2c_1_resources), + .resource = mxc_i2c_1_resources +}; + +#ifdef CONFIG_MACH_MX27 +static struct resource mxc_i2c_2_resources[] = { + [0] = { + .start = I2C2_BASE_ADDR, + .end = I2C2_BASE_ADDR + 0x0fff, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_I2C2, + .end = MXC_INT_I2C2, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device mxc_i2c_device1 = { + .name = "imx-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_i2c_2_resources), + .resource = mxc_i2c_2_resources +}; +#endif + +static struct resource mxc_pwm_resources[] = { + [0] = { + .start = PWM_BASE_ADDR, + .end = PWM_BASE_ADDR + 0x0fff, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_PWM, + .end = MXC_INT_PWM, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_pwm_device = { + .name = "mxc_pwm", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_pwm_resources), + .resource = mxc_pwm_resources +}; + +/* + * Resource definition for the MXC SDHC + */ +static struct resource mxc_sdhc1_resources[] = { + [0] = { + .start = SDHC1_BASE_ADDR, + .end = SDHC1_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MXC_INT_SDHC1, + .end = MXC_INT_SDHC1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DMA_REQ_SDHC1, + .end = DMA_REQ_SDHC1, + .flags = IORESOURCE_DMA + }, +}; + +static u64 mxc_sdhc1_dmamask = 0xffffffffUL; + +struct platform_device mxc_sdhc_device0 = { + .name = "mxc-mmc", + .id = 0, + .dev = { + .dma_mask = &mxc_sdhc1_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), + .resource = mxc_sdhc1_resources, +}; + +static struct resource mxc_sdhc2_resources[] = { + [0] = { + .start = SDHC2_BASE_ADDR, + .end = SDHC2_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MXC_INT_SDHC2, + .end = MXC_INT_SDHC2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DMA_REQ_SDHC2, + .end = DMA_REQ_SDHC2, + .flags = IORESOURCE_DMA + }, +}; + +static u64 mxc_sdhc2_dmamask = 0xffffffffUL; + +struct platform_device mxc_sdhc_device1 = { + .name = "mxc-mmc", + .id = 1, + .dev = { + .dma_mask = &mxc_sdhc2_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(mxc_sdhc2_resources), + .resource = mxc_sdhc2_resources, +}; + /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { [0] = { .chip.label = "gpio-0", .irq = MXC_INT_GPIO, - .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0), + .base = IO_ADDRESS(GPIO_BASE_ADDR), .virtual_irq_start = MXC_GPIO_IRQ_START, }, [1] = { .chip.label = "gpio-1", - .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1), + .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100), .virtual_irq_start = MXC_GPIO_IRQ_START + 32, }, [2] = { .chip.label = "gpio-2", - .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2), + .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200), .virtual_irq_start = MXC_GPIO_IRQ_START + 64, }, [3] = { .chip.label = "gpio-3", - .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3), + .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300), .virtual_irq_start = MXC_GPIO_IRQ_START + 96, }, [4] = { .chip.label = "gpio-4", - .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4), + .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400), .virtual_irq_start = MXC_GPIO_IRQ_START + 128, }, [5] = { .chip.label = "gpio-5", - .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5), + .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500), .virtual_irq_start = MXC_GPIO_IRQ_START + 160, } }; diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index 1e8cb577a64..049005bb6aa 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -1,4 +1,3 @@ - extern struct platform_device mxc_gpt1; extern struct platform_device mxc_gpt2; extern struct platform_device mxc_gpt3; @@ -14,3 +13,10 @@ extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_uart_device5; extern struct platform_device mxc_w1_master_device; extern struct platform_device mxc_nand_device; +extern struct platform_device mxc_fb_device; +extern struct platform_device mxc_fec_device; +extern struct platform_device mxc_pwm_device; +extern struct platform_device mxc_i2c_device0; +extern struct platform_device mxc_i2c_device1; +extern struct platform_device mxc_sdhc_device0; +extern struct platform_device mxc_sdhc_device1; diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c index dea6521d4d5..bd51dd04948 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/generic.c @@ -21,6 +21,7 @@ #include <linux/mm.h> #include <linux/init.h> #include <mach/hardware.h> +#include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c index 2b5c67f5457..4a3b097adc1 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mx27ads.c @@ -31,7 +31,7 @@ #include <asm/mach/map.h> #include <mach/gpio.h> #include <mach/imx-uart.h> -#include <mach/iomux-mx1-mx2.h> +#include <mach/iomux.h> #include <mach/board-mx27ads.h> #include "devices.h" @@ -135,6 +135,7 @@ static int uart_mxc_port3_exit(struct platform_device *pdev) { mxc_gpio_release_multiple_pins(mxc_uart3_pins, ARRAY_SIZE(mxc_uart3_pins)); + return 0; } static int mxc_uart4_pins[] = { @@ -179,6 +180,7 @@ static int uart_mxc_port5_exit(struct platform_device *pdev) static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, + &mxc_fec_device, }; static int mxc_fec_pins[] = { @@ -196,7 +198,7 @@ static int mxc_fec_pins[] = { PD11_AOUT_FEC_TX_CLK, PD12_AOUT_FEC_RXD0, PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_CLR, + PD14_AOUT_FEC_RX_CLK, PD15_AOUT_FEC_COL, PD16_AIN_FEC_TX_ER, PF23_AIN_FEC_TX_EN @@ -208,12 +210,6 @@ static void gpio_fec_active(void) ARRAY_SIZE(mxc_fec_pins), "FEC"); } -static void gpio_fec_inactive(void) -{ - mxc_gpio_release_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins)); -} - static struct imxuart_platform_data uart_pdata[] = { { .init = uart_mxc_port0_init, @@ -263,11 +259,10 @@ static void __init mx27ads_timer_init(void) if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) fref = 27000000; - mxc_clocks_init(fref); - mxc_timer_init("gpt_clk.0"); + mx27_clocks_init(fref); } -struct sys_timer mx27ads_timer = { +static struct sys_timer mx27ads_timer = { .init = mx27ads_timer_init, }; @@ -280,7 +275,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = { }, }; -void __init mx27ads_map_io(void) +static void __init mx27ads_map_io(void) { mxc_map_io(); iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index dfd4156da7d..aa4eaa61d1b 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -20,11 +20,18 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/mtd/plat-ram.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> + #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/iomux-mx1-mx2.h> +#include <mach/iomux.h> +#ifdef CONFIG_I2C_IMX +#include <mach/i2c.h> +#endif #include <asm/mach/time.h> #include <mach/imx-uart.h> #include <mach/board-pcm038.h> @@ -121,10 +128,10 @@ static int uart_mxc_port1_exit(struct platform_device *pdev) return 0; } -static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS, +static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD, PE9_PF_UART3_RXD, PE10_PF_UART3_CTS, - PE9_PF_UART3_RXD }; + PE11_PF_UART3_RTS }; static int uart_mxc_port2_init(struct platform_device *pdev) { @@ -170,7 +177,7 @@ static int mxc_fec_pins[] = { PD11_AOUT_FEC_TX_CLK, PD12_AOUT_FEC_RXD0, PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_CLR, + PD14_AOUT_FEC_RX_CLK, PD15_AOUT_FEC_COL, PD16_AIN_FEC_TX_ER, PF23_AIN_FEC_TX_EN @@ -182,12 +189,6 @@ static void gpio_fec_active(void) ARRAY_SIZE(mxc_fec_pins), "FEC"); } -static void gpio_fec_inactive(void) -{ - mxc_gpio_release_multiple_pins(mxc_fec_pins, - ARRAY_SIZE(mxc_fec_pins)); -} - static struct mxc_nand_platform_data pcm038_nand_board_info = { .width = 1, .hw_ecc = 1, @@ -196,6 +197,7 @@ static struct mxc_nand_platform_data pcm038_nand_board_info = { static struct platform_device *platform_devices[] __initdata = { &pcm038_nor_mtd_device, &mxc_w1_master_device, + &mxc_fec_device, &pcm038_sram_mtd_device, }; @@ -208,6 +210,51 @@ static void __init pcm038_init_sram(void) __raw_writel(0x22220a00, CSCR_A(1)); } +#ifdef CONFIG_I2C_IMX +static int mxc_i2c1_pins[] = { + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL +}; + +static int pcm038_i2c_1_init(struct device *dev) +{ + return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins), + "I2C1"); +} + +static void pcm038_i2c_1_exit(struct device *dev) +{ + mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins)); +} + +static struct imxi2c_platform_data pcm038_i2c_1_data = { + .bitrate = 100000, + .init = pcm038_i2c_1_init, + .exit = pcm038_i2c_1_exit, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pcm038_i2c_devices[] = { + [0] = { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, + [1] = { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563" + }, + [2] = { + I2C_BOARD_INFO("lm75", 0x4a), + .type = "lm75" + } +}; +#endif + static void __init pcm038_init(void) { gpio_fec_active(); @@ -217,9 +264,17 @@ static void __init pcm038_init(void) mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */ + mxc_gpio_mode(PE16_AF_OWIRE); mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); +#ifdef CONFIG_I2C_IMX + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, pcm038_i2c_devices, + ARRAY_SIZE(pcm038_i2c_devices)); + + mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); +#endif + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD @@ -229,11 +284,10 @@ static void __init pcm038_init(void) static void __init pcm038_timer_init(void) { - mxc_clocks_init(26000000); - mxc_timer_init("gpt_clk.0"); + mx27_clocks_init(26000000); } -struct sys_timer pcm038_timer = { +static struct sys_timer pcm038_timer = { .init = pcm038_timer_init, }; diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index a560cd6ad23..bf4e520bc1b 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -17,9 +17,138 @@ */ #include <linux/platform_device.h> -#include <mach/hardware.h> +#include <linux/gpio.h> +#include <linux/irq.h> + #include <asm/mach/arch.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/mmc.h> +#include <mach/imxfb.h> +#include <mach/iomux.h> + +#include "devices.h" + +static int pcm970_sdhc2_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_PORTC + 28); +} + +static int pcm970_sdhc2_pins[] = { + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) +{ + int ret; + + ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins, + ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2"); + if(ret) + return ret; + + ret = request_irq(IRQ_GPIOC(29), detect_irq, 0, + "imx-mmc-detect", data); + if (ret) + goto out_release_gpio; + + set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING); + + ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); + if (ret) + goto out_release_gpio; + + mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN); + gpio_direction_input(GPIO_PORTC + 28); + + return 0; + +out_release_gpio: + mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, + ARRAY_SIZE(pcm970_sdhc2_pins)); + return ret; +} + +static void pcm970_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOC(29), data); + gpio_free(GPIO_PORTC + 28); + mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins, + ARRAY_SIZE(pcm970_sdhc2_pins)); +} + +static struct imxmmc_platform_data sdhc_pdata = { + .get_ro = pcm970_sdhc2_get_ro, + .init = pcm970_sdhc2_init, + .exit = pcm970_sdhc2_exit, +}; + +static int mxc_fb_pins[] = { + PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2, + PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6, + PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10, + PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14, + PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV, + PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC, + PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD +}; + +static int pcm038_fb_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_fb_pins, + ARRAY_SIZE(mxc_fb_pins), "FB"); +} + +static int pcm038_fb_exit(struct platform_device *pdev) +{ + mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins)); + + return 0; +} + +/* + * Connected is a portrait Sharp-QVGA display + * of type: LQ035Q7DH06 + */ +static struct imx_fb_platform_data pcm038_fb_data = { + .pixclock = 188679, /* in ps (5.3MHz) */ + .xres = 240, + .yres = 320, + + .bpp = 16, + .hsync_len = 7, + .left_margin = 5, + .right_margin = 16, + + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 9, + .fixed_screen_cpu = 0, + + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock not inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pcr = 0xFA0080C0, + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, + + .init = pcm038_fb_init, + .exit = pcm038_fb_exit, +}; + /* * system init for baseboard usage. Will be called by pcm038 init. * @@ -28,4 +157,6 @@ */ void __init pcm970_baseboard_init(void) { + mxc_register_device(&mxc_fb_device, &pcm038_fb_data); + mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); } diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c index 16debc296da..40a485cdc10 100644 --- a/arch/arm/mach-mx2/serial.c +++ b/arch/arm/mach-mx2/serial.c @@ -22,6 +22,7 @@ #include <linux/serial.h> #include <mach/hardware.h> #include <mach/imx-uart.h> +#include "devices.h" static struct resource uart0[] = { { @@ -99,6 +100,7 @@ struct platform_device mxc_uart_device3 = { .num_resources = ARRAY_SIZE(uart3), }; +#ifdef CONFIG_MACH_MX27 static struct resource uart4[] = { { .start = UART5_BASE_ADDR, @@ -136,3 +138,4 @@ struct platform_device mxc_uart_device5 = { .resource = uart5, .num_resources = ARRAY_SIZE(uart5), }; +#endif diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index e79659e8176..d6235583e97 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -1,21 +1,40 @@ -menu "MX3 Options" - depends on ARCH_MX3 +if ARCH_MX3 + +config ARCH_MX31 + bool + +config ARCH_MX35 + bool + +comment "MX3 platforms:" config MACH_MX31ADS bool "Support MX31ADS platforms" + select ARCH_MX31 default y help Include support for MX31ADS platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31ADS_WM1133_EV1 + bool "Support Wolfson Microelectronics 1133-EV1 module" + depends on MACH_MX31ADS + select MFD_WM8350_CONFIG_MODE_0 + select MFD_WM8352_CONFIG_MODE_0 + help + Include support for the Wolfson Microelectronics 1133-EV1 PMU + and audio module for the MX31ADS platform. + config MACH_PCM037 - bool "Support Phytec pcm037 platforms" + bool "Support Phytec pcm037 (i.MX31) platforms" + select ARCH_MX31 help Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" + select ARCH_MX31 default n help Include support for MX31 LITEKIT platform. This includes specific @@ -23,6 +42,7 @@ config MACH_MX31LITE config MACH_MX31_3DS bool "Support MX31PDK (3DS)" + select ARCH_MX31 default n help Include support for MX31PDK (3DS) platform. This includes specific @@ -30,10 +50,18 @@ config MACH_MX31_3DS config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" + select ARCH_MX31 default n help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. -endmenu +config MACH_QONG + bool "Support Dave/DENX QongEVB-LITE platform" + select ARCH_MX31 + default n + help + Include support for Dave/DENX QongEVB-LITE platform. This includes + specific configurations for the board and its peripherals. +endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 5a151540fe8..272c8a953b3 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,9 +4,13 @@ # Object file lists. -obj-y := mm.o clock.o devices.o iomux.o +obj-y := mm.o devices.o +obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o +obj-$(CONFIG_ARCH_MX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o -obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o +obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ + mx31moboard-marxbot.o +obj-$(CONFIG_MACH_QONG) += qong.o diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c new file mode 100644 index 00000000000..53a112d4e04 --- /dev/null +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -0,0 +1,487 @@ +/* + * Copyright (C) 2009 by Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/clkdev.h> + +#include <mach/clock.h> +#include <mach/hardware.h> +#include <mach/common.h> + +#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) + +#define CCM_CCMR 0x00 +#define CCM_PDR0 0x04 +#define CCM_PDR1 0x08 +#define CCM_PDR2 0x0C +#define CCM_PDR3 0x10 +#define CCM_PDR4 0x14 +#define CCM_RCSR 0x18 +#define CCM_MPCTL 0x1C +#define CCM_PPCTL 0x20 +#define CCM_ACMR 0x24 +#define CCM_COSR 0x28 +#define CCM_CGR0 0x2C +#define CCM_CGR1 0x30 +#define CCM_CGR2 0x34 +#define CCM_CGR3 0x38 + +#ifdef HAVE_SET_RATE_SUPPORT +static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost) +{ + u32 min_pre, temp_pre, old_err, err; + + min_pre = (div - 1) / maxpost + 1; + old_err = 8; + + for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) { + if (div > (temp_pre * maxpost)) + break; + + if (div < (temp_pre * temp_pre)) + continue; + + err = div % temp_pre; + + if (err == 0) { + *pre = temp_pre; + break; + } + + err = temp_pre - err; + + if (err < old_err) { + old_err = err; + *pre = temp_pre; + } + } + + *post = (div + *pre - 1) / *pre; +} + +/* get the best values for a 3-bit divider combined with a 6-bit divider */ +static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post) +{ + if (div >= 512) { + *pre = 8; + *post = 64; + } else if (div >= 64) { + calc_dividers(div, pre, post, 64); + } else if (div <= 8) { + *pre = div; + *post = 1; + } else { + *pre = 1; + *post = div; + } +} + +/* get the best values for two cascaded 3-bit dividers */ +static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post) +{ + if (div >= 64) { + *pre = *post = 8; + } else if (div > 8) { + calc_dividers(div, pre, post, 8); + } else { + *pre = 1; + *post = div; + } +} +#endif + +static unsigned long get_rate_mpll(void) +{ + ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL); + + return mxc_decode_pll(mpctl, 24000000); +} + +static unsigned long get_rate_ppll(void) +{ + ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL); + + return mxc_decode_pll(ppctl, 24000000); +} + +struct arm_ahb_div { + unsigned char arm, ahb, sel; +}; + +static struct arm_ahb_div clk_consumer[] = { + { .arm = 1, .ahb = 4, .sel = 0}, + { .arm = 1, .ahb = 3, .sel = 1}, + { .arm = 2, .ahb = 2, .sel = 0}, + { .arm = 0, .ahb = 0, .sel = 0}, + { .arm = 0, .ahb = 0, .sel = 0}, + { .arm = 0, .ahb = 0, .sel = 0}, + { .arm = 4, .ahb = 1, .sel = 0}, + { .arm = 1, .ahb = 5, .sel = 0}, + { .arm = 1, .ahb = 8, .sel = 0}, + { .arm = 1, .ahb = 6, .sel = 1}, + { .arm = 2, .ahb = 4, .sel = 0}, + { .arm = 0, .ahb = 0, .sel = 0}, + { .arm = 0, .ahb = 0, .sel = 0}, + { .arm = 0, .ahb = 0, .sel = 0}, + { .arm = 4, .ahb = 2, .sel = 0}, + { .arm = 0, .ahb = 0, .sel = 0}, +}; + +static struct arm_ahb_div clk_automotive[] = { + { .arm = 1, .ahb = 3, .sel = 0}, + { .arm = 1, .ahb = 2, .sel = 1}, + { .arm = 2, .ahb = 1, .sel = 1}, + { .arm = 0, .ahb = 0, .sel = 0}, + { .arm = 1, .ahb = 6, .sel = 0}, + { .arm = 1, .ahb = 4, .sel = 1}, + { .arm = 2, .ahb = 2, .sel = 1}, + { .arm = 0, .ahb = 0, .sel = 0}, +}; + +static unsigned long get_rate_arm(void) +{ + unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); + struct arm_ahb_div *aad; + unsigned long fref = get_rate_mpll(); + + if (pdr0 & 1) { + /* consumer path */ + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; + if (aad->sel) + fref = fref * 2 / 3; + } else { + /* auto path */ + aad = &clk_automotive[(pdr0 >> 9) & 0x7]; + if (aad->sel) + fref = fref * 3 / 4; + } + return fref / aad->arm; +} + +static unsigned long get_rate_ahb(struct clk *clk) +{ + unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); + struct arm_ahb_div *aad; + unsigned long fref = get_rate_mpll(); + + if (pdr0 & 1) + /* consumer path */ + aad = &clk_consumer[(pdr0 >> 16) & 0xf]; + else + /* auto path */ + aad = &clk_automotive[(pdr0 >> 9) & 0x7]; + + return fref / aad->ahb; +} + +static unsigned long get_rate_ipg(struct clk *clk) +{ + return get_rate_ahb(NULL) >> 1; +} + +static unsigned long get_3_3_div(unsigned long in) +{ + return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1); +} + +static unsigned long get_rate_uart(struct clk *clk) +{ + unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); + unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long div = get_3_3_div(pdr4 >> 10); + + if (pdr3 & (1 << 14)) + return get_rate_arm() / div; + else + return get_rate_ppll() / div; +} + +static unsigned long get_rate_sdhc(struct clk *clk) +{ + unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); + unsigned long div, rate; + + if (pdr3 & (1 << 6)) + rate = get_rate_arm(); + else + rate = get_rate_ppll(); + + switch (clk->id) { + default: + case 0: + div = pdr3 & 0x3f; + break; + case 1: + div = (pdr3 >> 8) & 0x3f; + break; + case 2: + div = (pdr3 >> 16) & 0x3f; + break; + } + + return rate / get_3_3_div(div); +} + +static unsigned long get_rate_mshc(struct clk *clk) +{ + unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1); + unsigned long div1, div2, rate; + + if (pdr1 & (1 << 7)) + rate = get_rate_arm(); + else + rate = get_rate_ppll(); + + div1 = (pdr1 >> 29) & 0x7; + div2 = (pdr1 >> 22) & 0x3f; + + return rate / ((div1 + 1) * (div2 + 1)); +} + +static unsigned long get_rate_ssi(struct clk *clk) +{ + unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); + unsigned long div1, div2, rate; + + if (pdr2 & (1 << 6)) + rate = get_rate_arm(); + else + rate = get_rate_ppll(); + + switch (clk->id) { + default: + case 0: + div1 = pdr2 & 0x3f; + div2 = (pdr2 >> 24) & 0x7; + break; + case 1: + div1 = (pdr2 >> 8) & 0x3f; + div2 = (pdr2 >> 27) & 0x7; + break; + } + + return rate / ((div1 + 1) * (div2 + 1)); +} + +static unsigned long get_rate_csi(struct clk *clk) +{ + unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); + unsigned long rate; + + if (pdr2 & (1 << 7)) + rate = get_rate_arm(); + else + rate = get_rate_ppll(); + + return rate / get_3_3_div((pdr2 >> 16) & 0x3f); +} + +static unsigned long get_rate_ipg_per(struct clk *clk) +{ + unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); + unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); + unsigned long div1, div2; + + if (pdr0 & (1 << 26)) { + div1 = (pdr4 >> 19) & 0x7; + div2 = (pdr4 >> 16) & 0x7; + return get_rate_arm() / ((div1 + 1) * (div2 + 1)); + } else { + div1 = (pdr0 >> 12) & 0x7; + return get_rate_ahb(NULL) / div1; + } +} + +static int clk_cgr_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 3 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void clk_cgr_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(3 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +#define DEFINE_CLOCK(name, i, er, es, gr, sr) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = CCM_BASE + er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = clk_cgr_enable, \ + .disable = clk_cgr_disable, \ + } + +DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL); +DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL); +DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); +DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL); +DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL); +DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL); +DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL); +DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL); +DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL); +DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg_per, NULL); +DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg_per, NULL); +DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL); +DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL); +DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL); +DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL); + +DEFINE_CLOCK(fec_clk, 0, CCM_CGR1, 0, get_rate_ipg, NULL); +DEFINE_CLOCK(gpio1_clk, 0, CCM_CGR1, 2, NULL, NULL); +DEFINE_CLOCK(gpio2_clk, 1, CCM_CGR1, 4, NULL, NULL); +DEFINE_CLOCK(gpio3_clk, 2, CCM_CGR1, 6, NULL, NULL); +DEFINE_CLOCK(gpt_clk, 0, CCM_CGR1, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL); +DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL); +DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL); +DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL); +DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, NULL, NULL); +DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL); +DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL); +DEFINE_CLOCK(owire_clk, 0, CCM_CGR1, 26, get_rate_ipg_per, NULL); +DEFINE_CLOCK(pwm_clk, 0, CCM_CGR1, 28, get_rate_ipg_per, NULL); +DEFINE_CLOCK(rngc_clk, 0, CCM_CGR1, 30, get_rate_ipg, NULL); + +DEFINE_CLOCK(rtc_clk, 0, CCM_CGR2, 0, get_rate_ipg, NULL); +DEFINE_CLOCK(rtic_clk, 0, CCM_CGR2, 2, get_rate_ahb, NULL); +DEFINE_CLOCK(scc_clk, 0, CCM_CGR2, 4, get_rate_ipg, NULL); +DEFINE_CLOCK(sdma_clk, 0, CCM_CGR2, 6, NULL, NULL); +DEFINE_CLOCK(spba_clk, 0, CCM_CGR2, 8, get_rate_ipg, NULL); +DEFINE_CLOCK(spdif_clk, 0, CCM_CGR2, 10, NULL, NULL); +DEFINE_CLOCK(ssi1_clk, 0, CCM_CGR2, 12, get_rate_ssi, NULL); +DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL); +DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL); +DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL); +DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL); +DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL); +DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL); +DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL); +DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL); + +DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL); +DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL); +DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] __initdata = { + _REGISTER_CLOCK(NULL, "asrc", asrc_clk) + _REGISTER_CLOCK(NULL, "ata", ata_clk) + _REGISTER_CLOCK(NULL, "audmux", audmux_clk) + _REGISTER_CLOCK(NULL, "can", can1_clk) + _REGISTER_CLOCK(NULL, "can", can2_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK(NULL, "ect", ect_clk) + _REGISTER_CLOCK(NULL, "edio", edio_clk) + _REGISTER_CLOCK(NULL, "emi", emi_clk) + _REGISTER_CLOCK(NULL, "epit", epit1_clk) + _REGISTER_CLOCK(NULL, "epit", epit2_clk) + _REGISTER_CLOCK(NULL, "esai", esai_clk) + _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk) + _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk) + _REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK(NULL, "gpio", gpio1_clk) + _REGISTER_CLOCK(NULL, "gpio", gpio2_clk) + _REGISTER_CLOCK(NULL, "gpio", gpio3_clk) + _REGISTER_CLOCK("gpt.0", NULL, gpt_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) + _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) + _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) + _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk) + _REGISTER_CLOCK(NULL, "ipu", ipu_clk) + _REGISTER_CLOCK(NULL, "kpp", kpp_clk) + _REGISTER_CLOCK(NULL, "mlb", mlb_clk) + _REGISTER_CLOCK(NULL, "mshc", mshc_clk) + _REGISTER_CLOCK("mxc_w1", NULL, owire_clk) + _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK(NULL, "rngc", rngc_clk) + _REGISTER_CLOCK(NULL, "rtc", rtc_clk) + _REGISTER_CLOCK(NULL, "rtic", rtic_clk) + _REGISTER_CLOCK(NULL, "scc", scc_clk) + _REGISTER_CLOCK(NULL, "sdma", sdma_clk) + _REGISTER_CLOCK(NULL, "spba", spba_clk) + _REGISTER_CLOCK(NULL, "spdif", spdif_clk) + _REGISTER_CLOCK(NULL, "ssi", ssi1_clk) + _REGISTER_CLOCK(NULL, "ssi", ssi2_clk) + _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK(NULL, "usbotg", usbotg_clk) + _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK(NULL, "max", max_clk) + _REGISTER_CLOCK(NULL, "admux", admux_clk) + _REGISTER_CLOCK(NULL, "csi", csi_clk) + _REGISTER_CLOCK(NULL, "iim", iim_clk) + _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk) +}; + +int __init mx35_clocks_init() +{ + int i; + unsigned int ll = 0; + + mxc_set_cpu_type(MXC_CPU_MX35); + +#ifdef CONFIG_DEBUG_LL_CONSOLE + ll = (3 << 16); +#endif + + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + + /* Turn off all clocks except the ones we need to survive, namely: + * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart + */ + __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); + __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), + CCM_BASE + CCM_CGR1); + __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2); + __raw_writel(0, CCM_BASE + CCM_CGR3); + + mxc_timer_init(&gpt_clk); + + return 0; +} + diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index b1746aae1f8..ca46f4801c3 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -23,9 +23,13 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> + +#include <asm/clkdev.h> +#include <asm/div64.h> + #include <mach/clock.h> #include <mach/hardware.h> -#include <asm/div64.h> +#include <mach/common.h> #include "crm_regs.h" @@ -64,17 +68,17 @@ static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post) } static struct clk mcu_pll_clk; -static struct clk mcu_main_clk; -static struct clk usb_pll_clk; static struct clk serial_pll_clk; static struct clk ipg_clk; static struct clk ckih_clk; -static struct clk ahb_clk; -static int _clk_enable(struct clk *clk) +static int cgr_enable(struct clk *clk) { u32 reg; + if (!clk->enable_reg) + return 0; + reg = __raw_readl(clk->enable_reg); reg |= 3 << clk->enable_shift; __raw_writel(reg, clk->enable_reg); @@ -82,133 +86,69 @@ static int _clk_enable(struct clk *clk) return 0; } -static void _clk_disable(struct clk *clk) +static void cgr_disable(struct clk *clk) { u32 reg; + if (!clk->enable_reg) + return; + reg = __raw_readl(clk->enable_reg); reg &= ~(3 << clk->enable_shift); + + /* special case for EMI clock */ + if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8) + reg |= (1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); } -static void _clk_emi_disable(struct clk *clk) +static unsigned long pll_ref_get_rate(void) { - u32 reg; + unsigned long ccmr; + unsigned int prcs; - reg = __raw_readl(clk->enable_reg); - reg &= ~(3 << clk->enable_shift); - reg |= (1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); + ccmr = __raw_readl(MXC_CCM_CCMR); + prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET; + if (prcs == 0x1) + return CKIL_CLK_FREQ * 1024; + else + return clk_get_rate(&ckih_clk); } -static int _clk_pll_set_rate(struct clk *clk, unsigned long rate) +static unsigned long usb_pll_get_rate(struct clk *clk) { - u32 reg; - signed long pd = 1; /* Pre-divider */ - signed long mfi; /* Multiplication Factor (Integer part) */ - signed long mfn; /* Multiplication Factor (Integer part) */ - signed long mfd; /* Multiplication Factor (Denominator Part) */ - signed long tmp; - u32 ref_freq = clk_get_rate(clk->parent); + unsigned long reg; - while (((ref_freq / pd) * 10) > rate) - pd++; + reg = __raw_readl(MXC_CCM_UPCTL); - if ((ref_freq / pd) < PRE_DIV_MIN_FREQ) - return -EINVAL; + return mxc_decode_pll(reg, pll_ref_get_rate()); +} - /* the ref_freq/2 in the following is to round up */ - mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq; - if (mfi < 5 || mfi > 15) - return -EINVAL; +static unsigned long serial_pll_get_rate(struct clk *clk) +{ + unsigned long reg; - /* pick a mfd value that will work - * then solve for mfn */ - mfd = ref_freq / 50000; - - /* - * pll_freq * pd * mfd - * mfn = -------------------- - (mfi * mfd) - * 2 * ref_freq - */ - /* the tmp/2 is for rounding */ - tmp = ref_freq / 10000; - mfn = - ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) - - (mfi * mfd); - - mfn = mfn & 0x3ff; - pd--; - mfd--; - - /* Change the Pll value */ - reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) | - (mfn << MXC_CCM_PCTL_MFN_OFFSET) | - (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET); - - if (clk == &mcu_pll_clk) - __raw_writel(reg, MXC_CCM_MPCTL); - else if (clk == &usb_pll_clk) - __raw_writel(reg, MXC_CCM_UPCTL); - else if (clk == &serial_pll_clk) - __raw_writel(reg, MXC_CCM_SRPCTL); + reg = __raw_readl(MXC_CCM_SRPCTL); - return 0; + return mxc_decode_pll(reg, pll_ref_get_rate()); } -static unsigned long _clk_pll_get_rate(struct clk *clk) +static unsigned long mcu_pll_get_rate(struct clk *clk) { - long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; unsigned long reg, ccmr; - s64 temp; - unsigned int prcs; ccmr = __raw_readl(MXC_CCM_CCMR); - prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET; - if (prcs == 0x1) - ref_clk = CKIL_CLK_FREQ * 1024; - else - ref_clk = clk_get_rate(&ckih_clk); - - if (clk == &mcu_pll_clk) { - if ((ccmr & MXC_CCM_CCMR_MPE) == 0) - return ref_clk; - if ((ccmr & MXC_CCM_CCMR_MDS) != 0) - return ref_clk; - reg = __raw_readl(MXC_CCM_MPCTL); - } else if (clk == &usb_pll_clk) - reg = __raw_readl(MXC_CCM_UPCTL); - else if (clk == &serial_pll_clk) - reg = __raw_readl(MXC_CCM_SRPCTL); - else { - BUG(); - return 0; - } - - pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET; - mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET; - mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET; - mfi = (mfi <= 5) ? 5 : mfi; - mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK; - if (mfn >= 0x200) { - mfn |= 0xFFFFFE00; - mfn_abs = -mfn; - } - - ref_clk *= 2; - ref_clk /= pdf + 1; + if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS)) + return clk_get_rate(&ckih_clk); - temp = (u64) ref_clk * mfn_abs; - do_div(temp, mfd + 1); - if (mfn < 0) - temp = -temp; - temp = (ref_clk * mfi) + temp; + reg = __raw_readl(MXC_CCM_MPCTL); - return temp; + return mxc_decode_pll(reg, pll_ref_get_rate()); } -static int _clk_usb_pll_enable(struct clk *clk) +static int usb_pll_enable(struct clk *clk) { u32 reg; @@ -222,7 +162,7 @@ static int _clk_usb_pll_enable(struct clk *clk) return 0; } -static void _clk_usb_pll_disable(struct clk *clk) +static void usb_pll_disable(struct clk *clk) { u32 reg; @@ -231,7 +171,7 @@ static void _clk_usb_pll_disable(struct clk *clk) __raw_writel(reg, MXC_CCM_CCMR); } -static int _clk_serial_pll_enable(struct clk *clk) +static int serial_pll_enable(struct clk *clk) { u32 reg; @@ -245,7 +185,7 @@ static int _clk_serial_pll_enable(struct clk *clk) return 0; } -static void _clk_serial_pll_disable(struct clk *clk) +static void serial_pll_disable(struct clk *clk) { u32 reg; @@ -258,7 +198,7 @@ static void _clk_serial_pll_disable(struct clk *clk) #define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off) #define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off) -static unsigned long _clk_mcu_main_get_rate(struct clk *clk) +static unsigned long mcu_main_get_rate(struct clk *clk) { u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0); @@ -268,7 +208,7 @@ static unsigned long _clk_mcu_main_get_rate(struct clk *clk) return clk_get_rate(&mcu_pll_clk); } -static unsigned long _clk_hclk_get_rate(struct clk *clk) +static unsigned long ahb_get_rate(struct clk *clk) { unsigned long max_pdf; @@ -277,7 +217,7 @@ static unsigned long _clk_hclk_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (max_pdf + 1); } -static unsigned long _clk_ipg_get_rate(struct clk *clk) +static unsigned long ipg_get_rate(struct clk *clk) { unsigned long ipg_pdf; @@ -286,7 +226,7 @@ static unsigned long _clk_ipg_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (ipg_pdf + 1); } -static unsigned long _clk_nfc_get_rate(struct clk *clk) +static unsigned long nfc_get_rate(struct clk *clk) { unsigned long nfc_pdf; @@ -295,7 +235,7 @@ static unsigned long _clk_nfc_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (nfc_pdf + 1); } -static unsigned long _clk_hsp_get_rate(struct clk *clk) +static unsigned long hsp_get_rate(struct clk *clk) { unsigned long hsp_pdf; @@ -304,7 +244,7 @@ static unsigned long _clk_hsp_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (hsp_pdf + 1); } -static unsigned long _clk_usb_get_rate(struct clk *clk) +static unsigned long usb_get_rate(struct clk *clk) { unsigned long usb_pdf, usb_prepdf; @@ -315,7 +255,7 @@ static unsigned long _clk_usb_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1); } -static unsigned long _clk_csi_get_rate(struct clk *clk) +static unsigned long csi_get_rate(struct clk *clk) { u32 reg, pre, post; @@ -329,7 +269,7 @@ static unsigned long _clk_csi_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (pre * post); } -static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate) +static unsigned long csi_round_rate(struct clk *clk, unsigned long rate) { u32 pre, post, parent = clk_get_rate(clk->parent); u32 div = parent / rate; @@ -342,7 +282,7 @@ static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate) return parent / (pre * post); } -static int _clk_csi_set_rate(struct clk *clk, unsigned long rate) +static int csi_set_rate(struct clk *clk, unsigned long rate) { u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); @@ -363,16 +303,7 @@ static int _clk_csi_set_rate(struct clk *clk, unsigned long rate) return 0; } -static unsigned long _clk_per_get_rate(struct clk *clk) -{ - unsigned long per_pdf; - - per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK, - MXC_CCM_PDR0_PER_PODF_OFFSET); - return clk_get_rate(clk->parent) / (per_pdf + 1); -} - -static unsigned long _clk_ssi1_get_rate(struct clk *clk) +static unsigned long ssi1_get_rate(struct clk *clk) { unsigned long ssi1_pdf, ssi1_prepdf; @@ -383,7 +314,7 @@ static unsigned long _clk_ssi1_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1); } -static unsigned long _clk_ssi2_get_rate(struct clk *clk) +static unsigned long ssi2_get_rate(struct clk *clk) { unsigned long ssi2_pdf, ssi2_prepdf; @@ -394,7 +325,7 @@ static unsigned long _clk_ssi2_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1); } -static unsigned long _clk_firi_get_rate(struct clk *clk) +static unsigned long firi_get_rate(struct clk *clk) { unsigned long firi_pdf, firi_prepdf; @@ -405,7 +336,7 @@ static unsigned long _clk_firi_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1); } -static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate) +static unsigned long firi_round_rate(struct clk *clk, unsigned long rate) { u32 pre, post; u32 parent = clk_get_rate(clk->parent); @@ -420,7 +351,7 @@ static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate) } -static int _clk_firi_set_rate(struct clk *clk, unsigned long rate) +static int firi_set_rate(struct clk *clk, unsigned long rate) { u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); @@ -441,12 +372,12 @@ static int _clk_firi_set_rate(struct clk *clk, unsigned long rate) return 0; } -static unsigned long _clk_mbx_get_rate(struct clk *clk) +static unsigned long mbx_get_rate(struct clk *clk) { return clk_get_rate(clk->parent) / 2; } -static unsigned long _clk_mstick1_get_rate(struct clk *clk) +static unsigned long mstick1_get_rate(struct clk *clk) { unsigned long msti_pdf; @@ -455,7 +386,7 @@ static unsigned long _clk_mstick1_get_rate(struct clk *clk) return clk_get_rate(clk->parent) / (msti_pdf + 1); } -static unsigned long _clk_mstick2_get_rate(struct clk *clk) +static unsigned long mstick2_get_rate(struct clk *clk) { unsigned long msti_pdf; @@ -472,661 +403,185 @@ static unsigned long clk_ckih_get_rate(struct clk *clk) } static struct clk ckih_clk = { - .name = "ckih", .get_rate = clk_ckih_get_rate, }; -static unsigned long clk_ckil_get_rate(struct clk *clk) -{ - return CKIL_CLK_FREQ; -} - -static struct clk ckil_clk = { - .name = "ckil", - .get_rate = clk_ckil_get_rate, -}; - static struct clk mcu_pll_clk = { - .name = "mcu_pll", .parent = &ckih_clk, - .set_rate = _clk_pll_set_rate, - .get_rate = _clk_pll_get_rate, + .get_rate = mcu_pll_get_rate, }; static struct clk mcu_main_clk = { - .name = "mcu_main_clk", .parent = &mcu_pll_clk, - .get_rate = _clk_mcu_main_get_rate, + .get_rate = mcu_main_get_rate, }; static struct clk serial_pll_clk = { - .name = "serial_pll", .parent = &ckih_clk, - .set_rate = _clk_pll_set_rate, - .get_rate = _clk_pll_get_rate, - .enable = _clk_serial_pll_enable, - .disable = _clk_serial_pll_disable, + .get_rate = serial_pll_get_rate, + .enable = serial_pll_enable, + .disable = serial_pll_disable, }; static struct clk usb_pll_clk = { - .name = "usb_pll", .parent = &ckih_clk, - .set_rate = _clk_pll_set_rate, - .get_rate = _clk_pll_get_rate, - .enable = _clk_usb_pll_enable, - .disable = _clk_usb_pll_disable, + .get_rate = usb_pll_get_rate, + .enable = usb_pll_enable, + .disable = usb_pll_disable, }; static struct clk ahb_clk = { - .name = "ahb_clk", .parent = &mcu_main_clk, - .get_rate = _clk_hclk_get_rate, -}; - -static struct clk per_clk = { - .name = "per_clk", - .parent = &usb_pll_clk, - .get_rate = _clk_per_get_rate, -}; - -static struct clk perclk_clk = { - .name = "perclk_clk", - .parent = &ipg_clk, -}; - -static struct clk cspi_clk[] = { - { - .name = "cspi_clk", - .id = 0, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET, - .disable = _clk_disable,}, - { - .name = "cspi_clk", - .id = 1, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET, - .disable = _clk_disable,}, - { - .name = "cspi_clk", - .id = 2, - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk ipg_clk = { - .name = "ipg_clk", - .parent = &ahb_clk, - .get_rate = _clk_ipg_get_rate, -}; - -static struct clk emi_clk = { - .name = "emi_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_EMI_OFFSET, - .disable = _clk_emi_disable, -}; - -static struct clk gpt_clk = { - .name = "gpt_clk", - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_GPT_OFFSET, - .disable = _clk_disable, -}; - -static struct clk pwm_clk = { - .name = "pwm_clk", - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR1_PWM_OFFSET, - .disable = _clk_disable, -}; - -static struct clk epit_clk[] = { - { - .name = "epit_clk", - .id = 0, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET, - .disable = _clk_disable,}, - { - .name = "epit_clk", - .id = 1, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk nfc_clk = { - .name = "nfc_clk", - .parent = &ahb_clk, - .get_rate = _clk_nfc_get_rate, -}; - -static struct clk scc_clk = { - .name = "scc_clk", - .parent = &ipg_clk, -}; - -static struct clk ipu_clk = { - .name = "ipu_clk", - .parent = &mcu_main_clk, - .get_rate = _clk_hsp_get_rate, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_IPU_OFFSET, - .disable = _clk_disable, -}; - -static struct clk kpp_clk = { - .name = "kpp_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_KPP_OFFSET, - .disable = _clk_disable, -}; - -static struct clk wdog_clk = { - .name = "wdog_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_WDOG_OFFSET, - .disable = _clk_disable, -}; -static struct clk rtc_clk = { - .name = "rtc_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_RTC_OFFSET, - .disable = _clk_disable, -}; - -static struct clk usb_clk[] = { - { - .name = "usb_clk", - .parent = &usb_pll_clk, - .get_rate = _clk_usb_get_rate,}, - { - .name = "usb_ahb_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk csi_clk = { - .name = "csi_clk", - .parent = &serial_pll_clk, - .get_rate = _clk_csi_get_rate, - .round_rate = _clk_csi_round_rate, - .set_rate = _clk_csi_set_rate, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_CSI_OFFSET, - .disable = _clk_disable, -}; - -static struct clk uart_clk[] = { - { - .name = "uart_clk", - .id = 0, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_UART1_OFFSET, - .disable = _clk_disable,}, - { - .name = "uart_clk", - .id = 1, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_UART2_OFFSET, - .disable = _clk_disable,}, - { - .name = "uart_clk", - .id = 2, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_UART3_OFFSET, - .disable = _clk_disable,}, - { - .name = "uart_clk", - .id = 3, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_UART4_OFFSET, - .disable = _clk_disable,}, - { - .name = "uart_clk", - .id = 4, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_UART5_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk i2c_clk[] = { - { - .name = "i2c_clk", - .id = 0, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET, - .disable = _clk_disable,}, - { - .name = "i2c_clk", - .id = 1, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET, - .disable = _clk_disable,}, - { - .name = "i2c_clk", - .id = 2, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk owire_clk = { - .name = "owire_clk", - .parent = &perclk_clk, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET, - .enable = _clk_enable, - .disable = _clk_disable, -}; - -static struct clk sdhc_clk[] = { - { - .name = "sdhc_clk", - .id = 0, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET, - .disable = _clk_disable,}, - { - .name = "sdhc_clk", - .id = 1, - .parent = &perclk_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk ssi_clk[] = { - { - .name = "ssi_clk", - .parent = &serial_pll_clk, - .get_rate = _clk_ssi1_get_rate, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET, - .disable = _clk_disable,}, - { - .name = "ssi_clk", - .id = 1, - .parent = &serial_pll_clk, - .get_rate = _clk_ssi2_get_rate, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk firi_clk = { - .name = "firi_clk", - .parent = &usb_pll_clk, - .round_rate = _clk_firi_round_rate, - .set_rate = _clk_firi_set_rate, - .get_rate = _clk_firi_get_rate, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_FIRI_OFFSET, - .disable = _clk_disable, -}; - -static struct clk ata_clk = { - .name = "ata_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_ATA_OFFSET, - .disable = _clk_disable, -}; - -static struct clk mbx_clk = { - .name = "mbx_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_GACC_OFFSET, - .get_rate = _clk_mbx_get_rate, -}; - -static struct clk vpu_clk = { - .name = "vpu_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_GACC_OFFSET, - .get_rate = _clk_mbx_get_rate, -}; - -static struct clk rtic_clk = { - .name = "rtic_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR2, - .enable_shift = MXC_CCM_CGR2_RTIC_OFFSET, - .disable = _clk_disable, -}; - -static struct clk rng_clk = { - .name = "rng_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_RNG_OFFSET, - .disable = _clk_disable, -}; - -static struct clk sdma_clk[] = { - { - .name = "sdma_ahb_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET, - .disable = _clk_disable,}, - { - .name = "sdma_ipg_clk", - .parent = &ipg_clk,} -}; - -static struct clk mpeg4_clk = { - .name = "mpeg4_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET, - .disable = _clk_disable, -}; - -static struct clk vl2cc_clk = { - .name = "vl2cc_clk", - .parent = &ahb_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET, - .disable = _clk_disable, -}; - -static struct clk mstick_clk[] = { - { - .name = "mstick_clk", - .id = 0, - .parent = &usb_pll_clk, - .get_rate = _clk_mstick1_get_rate, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET, - .disable = _clk_disable,}, - { - .name = "mstick_clk", - .id = 1, - .parent = &usb_pll_clk, - .get_rate = _clk_mstick2_get_rate, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR1, - .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET, - .disable = _clk_disable,}, -}; - -static struct clk iim_clk = { - .name = "iim_clk", - .parent = &ipg_clk, - .enable = _clk_enable, - .enable_reg = MXC_CCM_CGR0, - .enable_shift = MXC_CCM_CGR0_IIM_OFFSET, - .disable = _clk_disable, -}; - -static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate) -{ - u32 div, parent = clk_get_rate(clk->parent); - - div = parent / rate; - if (parent % rate) - div++; - - if (div > 8) - div = 16; - else if (div > 4) - div = 8; - else if (div > 2) - div = 4; - - return parent / div; -} - -static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate) -{ - u32 reg, div, parent = clk_get_rate(clk->parent); - - div = parent / rate; - - if (div == 16) - div = 4; - else if (div == 8) - div = 3; - else if (div == 4) - div = 2; - else if (div == 2) - div = 1; - else if (div == 1) - div = 0; - else - return -EINVAL; - - reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK; - reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET; - __raw_writel(reg, MXC_CCM_COSR); - - return 0; -} - -static unsigned long _clk_cko1_get_rate(struct clk *clk) -{ - u32 div; - - div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >> - MXC_CCM_COSR_CLKOUTDIV_OFFSET; - - return clk_get_rate(clk->parent) / (1 << div); -} - -static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent) -{ - u32 reg; - - reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK; - - if (parent == &mcu_main_clk) - reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &ipg_clk) - reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &usb_pll_clk) - reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == mcu_main_clk.parent) - reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &ahb_clk) - reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &serial_pll_clk) - reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &ckih_clk) - reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &emi_clk) - reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &ipu_clk) - reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &nfc_clk) - reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET; - else if (parent == &uart_clk[0]) - reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET; - else - return -EINVAL; - - __raw_writel(reg, MXC_CCM_COSR); - - return 0; -} - -static int _clk_cko1_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN; - __raw_writel(reg, MXC_CCM_COSR); + .get_rate = ahb_get_rate, +}; + +#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .enable = cgr_enable, \ + .disable = cgr_disable, \ + .secondary = s, \ + .parent = p, \ + } - return 0; -} +#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = getsetround##_get_rate, \ + .set_rate = getsetround##_set_rate, \ + .round_rate = getsetround##_round_rate, \ + .enable = cgr_enable, \ + .disable = cgr_disable, \ + .secondary = s, \ + .parent = p, \ + } -static void _clk_cko1_disable(struct clk *clk) +DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); + +DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk); +DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk); +DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk); + +DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); +DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); +DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk); +DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk); +DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk); +DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk); +DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk); + +DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk); +DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk); +DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk); +DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk); + +DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk); +DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk); +DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] __initdata = { + _REGISTER_CLOCK(NULL, "emi", emi_clk) + _REGISTER_CLOCK(NULL, "cspi", cspi1_clk) + _REGISTER_CLOCK(NULL, "cspi", cspi2_clk) + _REGISTER_CLOCK(NULL, "cspi", cspi3_clk) + _REGISTER_CLOCK(NULL, "gpt", gpt_clk) + _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK(NULL, "rtc", rtc_clk) + _REGISTER_CLOCK(NULL, "epit", epit1_clk) + _REGISTER_CLOCK(NULL, "epit", epit2_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) + _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) + _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) + _REGISTER_CLOCK(NULL, "kpp", kpp_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1) + _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2) + _REGISTER_CLOCK("mx3-camera.0", "csi", csi_clk) + _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) + _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) + _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) + _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk) + _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) + _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) + _REGISTER_CLOCK(NULL, "ssi", ssi1_clk) + _REGISTER_CLOCK(NULL, "ssi", ssi2_clk) + _REGISTER_CLOCK(NULL, "firi", firi_clk) + _REGISTER_CLOCK(NULL, "ata", ata_clk) + _REGISTER_CLOCK(NULL, "rtic", rtic_clk) + _REGISTER_CLOCK(NULL, "rng", rng_clk) + _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1) + _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2) + _REGISTER_CLOCK(NULL, "mstick", mstick1_clk) + _REGISTER_CLOCK(NULL, "mstick", mstick2_clk) + _REGISTER_CLOCK(NULL, "scc", scc_clk) + _REGISTER_CLOCK(NULL, "iim", iim_clk) + _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk) + _REGISTER_CLOCK(NULL, "mbx", mbx_clk) +}; + +int __init mx31_clocks_init(unsigned long fref) { u32 reg; + int i; - reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN; - __raw_writel(reg, MXC_CCM_COSR); -} - -static struct clk cko1_clk = { - .name = "cko1_clk", - .get_rate = _clk_cko1_get_rate, - .set_rate = _clk_cko1_set_rate, - .round_rate = _clk_cko1_round_rate, - .set_parent = _clk_cko1_set_parent, - .enable = _clk_cko1_enable, - .disable = _clk_cko1_disable, -}; - -static struct clk *mxc_clks[] = { - &ckih_clk, - &ckil_clk, - &mcu_pll_clk, - &usb_pll_clk, - &serial_pll_clk, - &mcu_main_clk, - &ahb_clk, - &per_clk, - &perclk_clk, - &cko1_clk, - &emi_clk, - &cspi_clk[0], - &cspi_clk[1], - &cspi_clk[2], - &ipg_clk, - &gpt_clk, - &pwm_clk, - &wdog_clk, - &rtc_clk, - &epit_clk[0], - &epit_clk[1], - &nfc_clk, - &ipu_clk, - &kpp_clk, - &usb_clk[0], - &usb_clk[1], - &csi_clk, - &uart_clk[0], - &uart_clk[1], - &uart_clk[2], - &uart_clk[3], - &uart_clk[4], - &i2c_clk[0], - &i2c_clk[1], - &i2c_clk[2], - &owire_clk, - &sdhc_clk[0], - &sdhc_clk[1], - &ssi_clk[0], - &ssi_clk[1], - &firi_clk, - &ata_clk, - &rtic_clk, - &rng_clk, - &sdma_clk[0], - &sdma_clk[1], - &mstick_clk[0], - &mstick_clk[1], - &scc_clk, - &iim_clk, -}; - -int __init mxc_clocks_init(unsigned long fref) -{ - u32 reg; - struct clk **clkp; + mxc_set_cpu_type(MXC_CPU_MX31); ckih_rate = fref; - for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) - clk_register(*clkp); - - if (cpu_is_mx31()) { - clk_register(&mpeg4_clk); - clk_register(&mbx_clk); - } else { - clk_register(&vpu_clk); - clk_register(&vl2cc_clk); - } + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); /* Turn off all possible clocks */ - __raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0); + __raw_writel((3 << 4), MXC_CCM_CGR0); __raw_writel(0, MXC_CCM_CGR1); - - __raw_writel(MXC_CCM_CGR2_EMI_MASK | - MXC_CCM_CGR2_IPMUX1_MASK | - MXC_CCM_CGR2_IPMUX2_MASK | - MXC_CCM_CGR2_MXCCLKENSEL_MASK | /* for MX32 */ - MXC_CCM_CGR2_CHIKCAMPEN_MASK | /* for MX32 */ - MXC_CCM_CGR2_OVRVPUBUSY_MASK | /* for MX32 */ + __raw_writel((3 << 8) | (3 << 14) | (3 << 16)| 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for MX32, but still required to be set */ MXC_CCM_CGR2); - clk_disable(&cko1_clk); - clk_disable(&usb_pll_clk); + usb_pll_disable(&usb_pll_clk); pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk)); @@ -1143,6 +598,8 @@ int __init mxc_clocks_init(unsigned long fref) __raw_writel(reg, MXC_CCM_PMCR1); } + mxc_timer_init(&ipg_clk); + return 0; } diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h index 4a0e0ede23b..adfa3627ad8 100644 --- a/arch/arm/mach-mx3/crm_regs.h +++ b/arch/arm/mach-mx3/crm_regs.h @@ -91,47 +91,6 @@ #define MXC_CCM_PDR0_MCU_PODF_OFFSET 0 #define MXC_CCM_PDR0_MCU_PODF_MASK 0x7 -#define MXC_CCM_PDR0_HSP_DIV_1 (0x0 << 11) -#define MXC_CCM_PDR0_HSP_DIV_2 (0x1 << 11) -#define MXC_CCM_PDR0_HSP_DIV_3 (0x2 << 11) -#define MXC_CCM_PDR0_HSP_DIV_4 (0x3 << 11) -#define MXC_CCM_PDR0_HSP_DIV_5 (0x4 << 11) -#define MXC_CCM_PDR0_HSP_DIV_6 (0x5 << 11) -#define MXC_CCM_PDR0_HSP_DIV_7 (0x6 << 11) -#define MXC_CCM_PDR0_HSP_DIV_8 (0x7 << 11) - -#define MXC_CCM_PDR0_IPG_DIV_1 (0x0 << 6) -#define MXC_CCM_PDR0_IPG_DIV_2 (0x1 << 6) -#define MXC_CCM_PDR0_IPG_DIV_3 (0x2 << 6) -#define MXC_CCM_PDR0_IPG_DIV_4 (0x3 << 6) - -#define MXC_CCM_PDR0_MAX_DIV_1 (0x0 << 3) -#define MXC_CCM_PDR0_MAX_DIV_2 (0x1 << 3) -#define MXC_CCM_PDR0_MAX_DIV_3 (0x2 << 3) -#define MXC_CCM_PDR0_MAX_DIV_4 (0x3 << 3) -#define MXC_CCM_PDR0_MAX_DIV_5 (0x4 << 3) -#define MXC_CCM_PDR0_MAX_DIV_6 (0x5 << 3) -#define MXC_CCM_PDR0_MAX_DIV_7 (0x6 << 3) -#define MXC_CCM_PDR0_MAX_DIV_8 (0x7 << 3) - -#define MXC_CCM_PDR0_NFC_DIV_1 (0x0 << 8) -#define MXC_CCM_PDR0_NFC_DIV_2 (0x1 << 8) -#define MXC_CCM_PDR0_NFC_DIV_3 (0x2 << 8) -#define MXC_CCM_PDR0_NFC_DIV_4 (0x3 << 8) -#define MXC_CCM_PDR0_NFC_DIV_5 (0x4 << 8) -#define MXC_CCM_PDR0_NFC_DIV_6 (0x5 << 8) -#define MXC_CCM_PDR0_NFC_DIV_7 (0x6 << 8) -#define MXC_CCM_PDR0_NFC_DIV_8 (0x7 << 8) - -#define MXC_CCM_PDR0_MCU_DIV_1 0x0 -#define MXC_CCM_PDR0_MCU_DIV_2 0x1 -#define MXC_CCM_PDR0_MCU_DIV_3 0x2 -#define MXC_CCM_PDR0_MCU_DIV_4 0x3 -#define MXC_CCM_PDR0_MCU_DIV_5 0x4 -#define MXC_CCM_PDR0_MCU_DIV_6 0x5 -#define MXC_CCM_PDR0_MCU_DIV_7 0x6 -#define MXC_CCM_PDR0_MCU_DIV_8 0x7 - #define MXC_CCM_PDR1_USB_PRDF_OFFSET 30 #define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30) #define MXC_CCM_PDR1_USB_PODF_OFFSET 27 @@ -152,118 +111,6 @@ /* Bit definitions for RCSR */ #define MXC_CCM_RCSR_NF16B 0x80000000 -/* Bit definitions for both MCU, USB and SR PLL control registers */ -#define MXC_CCM_PCTL_BRM 0x80000000 -#define MXC_CCM_PCTL_PD_OFFSET 26 -#define MXC_CCM_PCTL_PD_MASK (0xF << 26) -#define MXC_CCM_PCTL_MFD_OFFSET 16 -#define MXC_CCM_PCTL_MFD_MASK (0x3FF << 16) -#define MXC_CCM_PCTL_MFI_OFFSET 10 -#define MXC_CCM_PCTL_MFI_MASK (0xF << 10) -#define MXC_CCM_PCTL_MFN_OFFSET 0 -#define MXC_CCM_PCTL_MFN_MASK 0x3FF - -#define MXC_CCM_CGR0_SD_MMC1_OFFSET 0 -#define MXC_CCM_CGR0_SD_MMC1_MASK (0x3 << 0) -#define MXC_CCM_CGR0_SD_MMC2_OFFSET 2 -#define MXC_CCM_CGR0_SD_MMC2_MASK (0x3 << 2) -#define MXC_CCM_CGR0_GPT_OFFSET 4 -#define MXC_CCM_CGR0_GPT_MASK (0x3 << 4) -#define MXC_CCM_CGR0_EPIT1_OFFSET 6 -#define MXC_CCM_CGR0_EPIT1_MASK (0x3 << 6) -#define MXC_CCM_CGR0_EPIT2_OFFSET 8 -#define MXC_CCM_CGR0_EPIT2_MASK (0x3 << 8) -#define MXC_CCM_CGR0_IIM_OFFSET 10 -#define MXC_CCM_CGR0_IIM_MASK (0x3 << 10) -#define MXC_CCM_CGR0_ATA_OFFSET 12 -#define MXC_CCM_CGR0_ATA_MASK (0x3 << 12) -#define MXC_CCM_CGR0_SDMA_OFFSET 14 -#define MXC_CCM_CGR0_SDMA_MASK (0x3 << 14) -#define MXC_CCM_CGR0_CSPI3_OFFSET 16 -#define MXC_CCM_CGR0_CSPI3_MASK (0x3 << 16) -#define MXC_CCM_CGR0_RNG_OFFSET 18 -#define MXC_CCM_CGR0_RNG_MASK (0x3 << 18) -#define MXC_CCM_CGR0_UART1_OFFSET 20 -#define MXC_CCM_CGR0_UART1_MASK (0x3 << 20) -#define MXC_CCM_CGR0_UART2_OFFSET 22 -#define MXC_CCM_CGR0_UART2_MASK (0x3 << 22) -#define MXC_CCM_CGR0_SSI1_OFFSET 24 -#define MXC_CCM_CGR0_SSI1_MASK (0x3 << 24) -#define MXC_CCM_CGR0_I2C1_OFFSET 26 -#define MXC_CCM_CGR0_I2C1_MASK (0x3 << 26) -#define MXC_CCM_CGR0_I2C2_OFFSET 28 -#define MXC_CCM_CGR0_I2C2_MASK (0x3 << 28) -#define MXC_CCM_CGR0_I2C3_OFFSET 30 -#define MXC_CCM_CGR0_I2C3_MASK (0x3 << 30) - -#define MXC_CCM_CGR1_HANTRO_OFFSET 0 -#define MXC_CCM_CGR1_HANTRO_MASK (0x3 << 0) -#define MXC_CCM_CGR1_MEMSTICK1_OFFSET 2 -#define MXC_CCM_CGR1_MEMSTICK1_MASK (0x3 << 2) -#define MXC_CCM_CGR1_MEMSTICK2_OFFSET 4 -#define MXC_CCM_CGR1_MEMSTICK2_MASK (0x3 << 4) -#define MXC_CCM_CGR1_CSI_OFFSET 6 -#define MXC_CCM_CGR1_CSI_MASK (0x3 << 6) -#define MXC_CCM_CGR1_RTC_OFFSET 8 -#define MXC_CCM_CGR1_RTC_MASK (0x3 << 8) -#define MXC_CCM_CGR1_WDOG_OFFSET 10 -#define MXC_CCM_CGR1_WDOG_MASK (0x3 << 10) -#define MXC_CCM_CGR1_PWM_OFFSET 12 -#define MXC_CCM_CGR1_PWM_MASK (0x3 << 12) -#define MXC_CCM_CGR1_SIM_OFFSET 14 -#define MXC_CCM_CGR1_SIM_MASK (0x3 << 14) -#define MXC_CCM_CGR1_ECT_OFFSET 16 -#define MXC_CCM_CGR1_ECT_MASK (0x3 << 16) -#define MXC_CCM_CGR1_USBOTG_OFFSET 18 -#define MXC_CCM_CGR1_USBOTG_MASK (0x3 << 18) -#define MXC_CCM_CGR1_KPP_OFFSET 20 -#define MXC_CCM_CGR1_KPP_MASK (0x3 << 20) -#define MXC_CCM_CGR1_IPU_OFFSET 22 -#define MXC_CCM_CGR1_IPU_MASK (0x3 << 22) -#define MXC_CCM_CGR1_UART3_OFFSET 24 -#define MXC_CCM_CGR1_UART3_MASK (0x3 << 24) -#define MXC_CCM_CGR1_UART4_OFFSET 26 -#define MXC_CCM_CGR1_UART4_MASK (0x3 << 26) -#define MXC_CCM_CGR1_UART5_OFFSET 28 -#define MXC_CCM_CGR1_UART5_MASK (0x3 << 28) -#define MXC_CCM_CGR1_OWIRE_OFFSET 30 -#define MXC_CCM_CGR1_OWIRE_MASK (0x3 << 30) - -#define MXC_CCM_CGR2_SSI2_OFFSET 0 -#define MXC_CCM_CGR2_SSI2_MASK (0x3 << 0) -#define MXC_CCM_CGR2_CSPI1_OFFSET 2 -#define MXC_CCM_CGR2_CSPI1_MASK (0x3 << 2) -#define MXC_CCM_CGR2_CSPI2_OFFSET 4 -#define MXC_CCM_CGR2_CSPI2_MASK (0x3 << 4) -#define MXC_CCM_CGR2_GACC_OFFSET 6 -#define MXC_CCM_CGR2_GACC_MASK (0x3 << 6) -#define MXC_CCM_CGR2_EMI_OFFSET 8 -#define MXC_CCM_CGR2_EMI_MASK (0x3 << 8) -#define MXC_CCM_CGR2_RTIC_OFFSET 10 -#define MXC_CCM_CGR2_RTIC_MASK (0x3 << 10) -#define MXC_CCM_CGR2_FIRI_OFFSET 12 -#define MXC_CCM_CGR2_FIRI_MASK (0x3 << 12) -#define MXC_CCM_CGR2_IPMUX1_OFFSET 14 -#define MXC_CCM_CGR2_IPMUX1_MASK (0x3 << 14) -#define MXC_CCM_CGR2_IPMUX2_OFFSET 16 -#define MXC_CCM_CGR2_IPMUX2_MASK (0x3 << 16) - -/* These new CGR2 bits are added in MX32 */ -#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET 18 -#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK (0x3 << 18) -#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET 20 -#define MXC_CCM_CGR2_APMSSICLKSEL_MASK (0x3 << 20) -#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET 22 -#define MXC_CCM_CGR2_APMPERCLKSEL_MASK (0x3 << 22) -#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET 24 -#define MXC_CCM_CGR2_MXCCLKENSEL_MASK (0x1 << 24) -#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET 25 -#define MXC_CCM_CGR2_CHIKCAMPEN_MASK (0x1 << 25) -#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET 26 -#define MXC_CCM_CGR2_OVRVPUBUSY_MASK (0x1 << 26) -#define MXC_CCM_CGR2_APMENA_OFFSET 30 -#define MXC_CCM_CGR2_AOMENA_MASK (0x1 << 30) - /* * LTR0 register offsets */ diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index f8428800f28..380be0c9b21 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -25,6 +25,8 @@ #include <mach/irqs.h> #include <mach/imx-uart.h> +#include "devices.h" + static struct resource uart0[] = { { .start = UART1_BASE_ADDR, @@ -82,6 +84,7 @@ struct platform_device mxc_uart_device2 = { .num_resources = ARRAY_SIZE(uart2), }; +#ifdef CONFIG_ARCH_MX31 static struct resource uart3[] = { { .start = UART4_BASE_ADDR, @@ -119,6 +122,7 @@ struct platform_device mxc_uart_device4 = { .resource = uart4, .num_resources = ARRAY_SIZE(uart4), }; +#endif /* CONFIG_ARCH_MX31 */ /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { @@ -164,8 +168,8 @@ struct platform_device mxc_w1_master_device = { static struct resource mxc_nand_resources[] = { { - .start = NFC_BASE_ADDR, - .end = NFC_BASE_ADDR + 0xfff, + .start = 0, /* runtime dependent */ + .end = 0, .flags = IORESOURCE_MEM }, { .start = MXC_INT_NANDFC, @@ -180,3 +184,188 @@ struct platform_device mxc_nand_device = { .num_resources = ARRAY_SIZE(mxc_nand_resources), .resource = mxc_nand_resources, }; + +static struct resource mxc_i2c0_resources[] = { + { + .start = I2C_BASE_ADDR, + .end = I2C_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MXC_INT_I2C, + .end = MXC_INT_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_i2c_device0 = { + .name = "imx-i2c", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_i2c0_resources), + .resource = mxc_i2c0_resources, +}; + +static struct resource mxc_i2c1_resources[] = { + { + .start = I2C2_BASE_ADDR, + .end = I2C2_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MXC_INT_I2C2, + .end = MXC_INT_I2C2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_i2c_device1 = { + .name = "imx-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_i2c1_resources), + .resource = mxc_i2c1_resources, +}; + +static struct resource mxc_i2c2_resources[] = { + { + .start = I2C3_BASE_ADDR, + .end = I2C3_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MXC_INT_I2C3, + .end = MXC_INT_I2C3, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_i2c_device2 = { + .name = "imx-i2c", + .id = 2, + .num_resources = ARRAY_SIZE(mxc_i2c2_resources), + .resource = mxc_i2c2_resources, +}; + +#ifdef CONFIG_ARCH_MX31 +static struct resource mxcsdhc0_resources[] = { + { + .start = MMC_SDHC1_BASE_ADDR, + .end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_MMC_SDHC1, + .end = MXC_INT_MMC_SDHC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource mxcsdhc1_resources[] = { + { + .start = MMC_SDHC2_BASE_ADDR, + .end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_MMC_SDHC2, + .end = MXC_INT_MMC_SDHC2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxcsdhc_device0 = { + .name = "mxc-mmc", + .id = 0, + .num_resources = ARRAY_SIZE(mxcsdhc0_resources), + .resource = mxcsdhc0_resources, +}; + +struct platform_device mxcsdhc_device1 = { + .name = "mxc-mmc", + .id = 1, + .num_resources = ARRAY_SIZE(mxcsdhc1_resources), + .resource = mxcsdhc1_resources, +}; +#endif /* CONFIG_ARCH_MX31 */ + +/* i.MX31 Image Processing Unit */ + +/* The resource order is important! */ +static struct resource mx3_ipu_rsrc[] = { + { + .start = IPU_CTRL_BASE_ADDR, + .end = IPU_CTRL_BASE_ADDR + 0x5F, + .flags = IORESOURCE_MEM, + }, { + .start = IPU_CTRL_BASE_ADDR + 0x88, + .end = IPU_CTRL_BASE_ADDR + 0xB3, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_IPU_SYN, + .end = MXC_INT_IPU_SYN, + .flags = IORESOURCE_IRQ, + }, { + .start = MXC_INT_IPU_ERR, + .end = MXC_INT_IPU_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx3_ipu = { + .name = "ipu-core", + .id = -1, + .num_resources = ARRAY_SIZE(mx3_ipu_rsrc), + .resource = mx3_ipu_rsrc, +}; + +static struct resource fb_resources[] = { + { + .start = IPU_CTRL_BASE_ADDR + 0xB4, + .end = IPU_CTRL_BASE_ADDR + 0x1BF, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mx3_fb = { + .name = "mx3_sdc_fb", + .id = -1, + .num_resources = ARRAY_SIZE(fb_resources), + .resource = fb_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +#ifdef CONFIG_ARCH_MX35 +static struct resource mxc_fec_resources[] = { + { + .start = MXC_FEC_BASE_ADDR, + .end = MXC_FEC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM + }, { + .start = MXC_INT_FEC, + .end = MXC_INT_FEC, + .flags = IORESOURCE_IRQ + }, +}; + +struct platform_device mxc_fec_device = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_fec_resources), + .resource = mxc_fec_resources, +}; +#endif + +static int mx3_devices_init(void) +{ + if (cpu_is_mx31()) { + mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; + mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + } + if (cpu_is_mx35()) { + mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; + mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff; + } + + return 0; +} + +subsys_initcall(mx3_devices_init); diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 9949ef4e069..88c04b296fa 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -6,3 +6,11 @@ extern struct platform_device mxc_uart_device3; extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_w1_master_device; extern struct platform_device mxc_nand_device; +extern struct platform_device mxc_i2c_device0; +extern struct platform_device mxc_i2c_device1; +extern struct platform_device mxc_i2c_device2; +extern struct platform_device mx3_ipu; +extern struct platform_device mx3_fb; +extern struct platform_device mxc_fec_device; +extern struct platform_device mxcsdhc_device0; +extern struct platform_device mxcsdhc_device1; diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c index 7a5088b519a..40ffc5a664d 100644 --- a/arch/arm/mach-mx3/iomux.c +++ b/arch/arm/mach-mx3/iomux.c @@ -1,6 +1,7 @@ /* * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -21,6 +22,7 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/kernel.h> #include <mach/hardware.h> #include <mach/gpio.h> #include <mach/iomux-mx3.h> @@ -38,6 +40,8 @@ static DEFINE_SPINLOCK(gpio_mux_lock); #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) + +unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; /* * set the mode for a IOMUX pin. */ @@ -50,9 +54,6 @@ int mxc_iomux_mode(unsigned int pin_mode) field = pin_mode & 0x3; mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT; - pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n", - __func__, (pin_mode & IOMUX_REG_MASK), field, mode); - spin_lock(&gpio_mux_lock); l = __raw_readl(reg); @@ -93,6 +94,86 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) EXPORT_SYMBOL(mxc_iomux_set_pad); /* + * setups a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib + */ +int mxc_iomux_setup_pin(const unsigned int pin, const char *label) +{ + unsigned pad = pin & IOMUX_PADNUM_MASK; + unsigned gpio; + + if (pad >= (PIN_MAX + 1)) { + printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", + pad, label ? label : "?"); + return -EINVAL; + } + + if (test_and_set_bit(pad, mxc_pin_alloc_map)) { + printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", + pad, label ? label : "?"); + return -EINVAL; + } + mxc_iomux_mode(pin); + + /* if we have a gpio, we can allocate it */ + gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; + if (gpio < (GPIO_PORT_MAX + 1) * 32) + if (gpio_request(gpio, label)) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(mxc_iomux_setup_pin); + +int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, + const char *label) +{ + unsigned int *p = pin_list; + int i; + int ret = -EINVAL; + + for (i = 0; i < count; i++) { + if (mxc_iomux_setup_pin(*p, label)) + goto setup_error; + p++; + } + return 0; + +setup_error: + mxc_iomux_release_multiple_pins(pin_list, i); + return ret; +} +EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); + +void mxc_iomux_release_pin(const unsigned int pin) +{ + unsigned pad = pin & IOMUX_PADNUM_MASK; + unsigned gpio; + + if (pad < (PIN_MAX + 1)) + clear_bit(pad, mxc_pin_alloc_map); + + gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT; + if (gpio < (GPIO_PORT_MAX + 1) * 32) + gpio_free(gpio); +} +EXPORT_SYMBOL(mxc_iomux_release_pin); + +void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count) +{ + unsigned int *p = pin_list; + int i; + + for (i = 0; i < count; i++) { + mxc_iomux_release_pin(*p); + p++; + } +} +EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); + +/* * This function enables/disables the general purpose function for a particular * signal. */ @@ -111,4 +192,3 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) spin_unlock(&gpio_mux_lock); } EXPORT_SYMBOL(mxc_iomux_set_gpr); - diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 0589b5cd33c..9e1459cb4b7 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -22,10 +22,14 @@ #include <linux/mm.h> #include <linux/init.h> -#include <mach/hardware.h> +#include <linux/err.h> + #include <asm/pgtable.h> #include <asm/mach/map.h> +#include <asm/hardware/cache-l2x0.h> + #include <mach/common.h> +#include <mach/hardware.h> /*! * @file mm.c @@ -50,6 +54,16 @@ static struct map_desc mxc_io_desc[] __initdata = { .pfn = __phys_to_pfn(AVIC_BASE_ADDR), .length = AVIC_SIZE, .type = MT_DEVICE_NONSHARED + }, { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_DEVICE_NONSHARED + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_DEVICE_NONSHARED }, }; @@ -62,3 +76,24 @@ void __init mxc_map_io(void) { iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } + +#ifdef CONFIG_CACHE_L2X0 +static int mxc_init_l2x0(void) +{ + void __iomem *l2x0_base; + + l2x0_base = ioremap(L2CC_BASE_ADDR, 4096); + if (IS_ERR(l2x0_base)) { + printk(KERN_ERR "remapping L2 cache area failed with %ld\n", + PTR_ERR(l2x0_base)); + return 0; + } + + l2x0_init(l2x0_base, 0x00030024, 0x00000000); + + return 0; +} + +arch_initcall(mxc_init_l2x0); +#endif + diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index f902a7c37c3..83e5e8e1276 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -22,6 +22,8 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> +#include <linux/gpio.h> +#include <linux/i2c.h> #include <linux/irq.h> #include <mach/hardware.h> @@ -35,6 +37,12 @@ #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 +#include <linux/mfd/wm8350/audio.h> +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/pmic.h> +#endif + #include "devices.h" /*! @@ -94,13 +102,16 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; +static int uart_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1 +}; + static inline void mxc_init_imx_uart(void) { - mxc_iomux_mode(MX31_PIN_CTS1__CTS1); - mxc_iomux_mode(MX31_PIN_RTS1__RTS1); - mxc_iomux_mode(MX31_PIN_TXD1__TXD1); - mxc_iomux_mode(MX31_PIN_RXD1__RXD1); - + mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); } #else /* !SERIAL_IMX */ @@ -176,7 +187,7 @@ static void __init mx31ads_init_expio(void) /* * Configure INT line as GPIO input */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO)); + mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); @@ -191,26 +202,301 @@ static void __init mx31ads_init_expio(void) set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler); } +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 +/* This section defines setup for the Wolfson Microelectronics + * 1133-EV1 PMU/audio board. When other PMU boards are supported the + * regulator definitions may be shared with them, but for now they can + * only be used with this board so would generate warnings about + * unused statics and some of the configuration is specific to this + * module. + */ + +/* CPU */ +static struct regulator_consumer_supply sw1a_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_init_data sw1a_data = { + .constraints = { + .name = "SW1A", + .min_uV = 1275000, + .max_uV = 1600000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .state_mem = { + .uV = 1400000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers), + .consumer_supplies = sw1a_consumers, +}; + +/* System IO - High */ +static struct regulator_init_data viohi_data = { + .constraints = { + .name = "VIOHO", + .min_uV = 2800000, + .max_uV = 2800000, + .state_mem = { + .uV = 2800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, + .always_on = 1, + .boot_on = 1, + }, +}; + +/* System IO - Low */ +static struct regulator_init_data violo_data = { + .constraints = { + .name = "VIOLO", + .min_uV = 1800000, + .max_uV = 1800000, + .state_mem = { + .uV = 1800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, + .always_on = 1, + .boot_on = 1, + }, +}; + +/* DDR RAM */ +static struct regulator_init_data sw2a_data = { + .constraints = { + .name = "SW2A", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .state_mem = { + .uV = 1800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .state_disk = { + .mode = REGULATOR_MODE_NORMAL, + .enabled = 0, + }, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + }, +}; + +static struct regulator_init_data ldo1_data = { + .constraints = { + .name = "VCAM/VMMC1/VMMC2", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, +}; + +static struct regulator_consumer_supply ldo2_consumers[] = { + { + .supply = "AVDD", + }, + { + .supply = "HPVDD", + }, +}; + +/* CODEC and SIM */ +static struct regulator_init_data ldo2_data = { + .constraints = { + .name = "VESIM/VSIM/AVDD", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), + .consumer_supplies = ldo2_consumers, +}; + +/* General */ +static struct regulator_init_data vdig_data = { + .constraints = { + .name = "VDIG", + .min_uV = 1500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + .boot_on = 1, + }, +}; + +/* Tranceivers */ +static struct regulator_init_data ldo4_data = { + .constraints = { + .name = "VRF1/CVDD_2.775", + .min_uV = 2500000, + .max_uV = 2500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + .boot_on = 1, + }, +}; + +static struct wm8350_led_platform_data wm8350_led_data = { + .name = "wm8350:white", + .default_trigger = "heartbeat", + .max_uA = 27899, +}; + +static struct wm8350_audio_platform_data imx32ads_wm8350_setup = { + .vmid_discharge_msecs = 1000, + .drain_msecs = 30, + .cap_discharge_msecs = 700, + .vmid_charge_msecs = 700, + .vmid_s_curve = WM8350_S_CURVE_SLOW, + .dis_out4 = WM8350_DISCHARGE_SLOW, + .dis_out3 = WM8350_DISCHARGE_SLOW, + .dis_out2 = WM8350_DISCHARGE_SLOW, + .dis_out1 = WM8350_DISCHARGE_SLOW, + .vroi_out4 = WM8350_TIE_OFF_500R, + .vroi_out3 = WM8350_TIE_OFF_500R, + .vroi_out2 = WM8350_TIE_OFF_500R, + .vroi_out1 = WM8350_TIE_OFF_500R, + .vroi_enable = 0, + .codec_current_on = WM8350_CODEC_ISEL_1_0, + .codec_current_standby = WM8350_CODEC_ISEL_0_5, + .codec_current_charge = WM8350_CODEC_ISEL_1_5, +}; + +static int mx31_wm8350_init(struct wm8350 *wm8350) +{ + int i; + + wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN, + WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW, + WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_ON); + + wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN, + WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_ON); + + wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN, + WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN, + WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT, + WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH, + WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT, + WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, + WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT, + WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, + WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, + WM8350_GPIO_DEBOUNCE_OFF); + + /* Fix up for our own supplies. */ + for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++) + ldo2_consumers[i].dev = wm8350->dev; + + wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data); + wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data); + wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data); + wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data); + wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data); + wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data); + wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data); + wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data); + + /* LEDs */ + wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1, + WM8350_DC5_ERRACT_SHUTDOWN_CONV); + wm8350_isink_set_flash(wm8350, WM8350_ISINK_A, + WM8350_ISINK_FLASH_DISABLE, + WM8350_ISINK_FLASH_TRIG_BIT, + WM8350_ISINK_FLASH_DUR_32MS, + WM8350_ISINK_FLASH_ON_INSTANT, + WM8350_ISINK_FLASH_OFF_INSTANT, + WM8350_ISINK_FLASH_MODE_EN); + wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5, + WM8350_ISINK_MODE_BOOST, + WM8350_ISINK_ILIM_NORMAL, + WM8350_DC5_RMP_20V, + WM8350_DC5_FBSRC_ISINKA); + wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A, + &wm8350_led_data); + + wm8350->codec.platform_data = &imx32ads_wm8350_setup; + + return 0; +} + +static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { + .init = mx31_wm8350_init, +}; +#endif + +#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE) +static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 + { + I2C_BOARD_INFO("wm8350", 0x1a), + .platform_data = &mx31_wm8350_pdata, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + }, +#endif +}; + +static void mxc_init_i2c(void) +{ + i2c_register_board_info(1, mx31ads_i2c1_devices, + ARRAY_SIZE(mx31ads_i2c1_devices)); + + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)); + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)); + + mxc_register_device(&mxc_i2c_device1, NULL); +} +#else +static void mxc_init_i2c(void) +{ +} +#endif + /*! * This structure defines static mappings for the i.MX31ADS board. */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = SPBA0_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), .length = SPBA0_SIZE, .type = MT_DEVICE_NONSHARED }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE / 2, @@ -221,13 +507,13 @@ static struct map_desc mx31ads_io_desc[] __initdata = { /*! * Set up static virtual mappings. */ -void __init mx31ads_map_io(void) +static void __init mx31ads_map_io(void) { mxc_map_io(); iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); } -void __init mx31ads_init_irq(void) +static void __init mx31ads_init_irq(void) { mxc_init_irq(); mx31ads_init_expio(); @@ -240,15 +526,15 @@ static void __init mxc_board_init(void) { mxc_init_extuart(); mxc_init_imx_uart(); + mxc_init_i2c(); } static void __init mx31ads_timer_init(void) { - mxc_clocks_init(26000000); - mxc_timer_init("ipg_clk.0"); + mx31_clocks_init(26000000); } -struct sys_timer mx31ads_timer = { +static struct sys_timer mx31ads_timer = { .init = mx31ads_timer_init, }; diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index c4344007014..894d98cd994 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -42,21 +42,11 @@ */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = SPBA0_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), .length = SPBA0_SIZE, .type = MT_DEVICE_NONSHARED }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, { .virtual = CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(CS4_BASE_ADDR), .length = CS4_SIZE, @@ -82,8 +72,7 @@ static void __init mxc_board_init(void) static void __init mx31lite_timer_init(void) { - mxc_clocks_init(26000000); - mxc_timer_init("ipg_clk.0"); + mx31_clocks_init(26000000); } struct sys_timer mx31lite_timer = { diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c new file mode 100644 index 00000000000..d080b4add79 --- /dev/null +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> + +#include "devices.h" + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static int mxc_uart1_pins[] = { + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, +}; + +/* + * system init for baseboard usage. Will be called by mx31moboard init. + */ +void __init mx31moboard_devboard_init(void) +{ + printk(KERN_INFO "Initializing mx31devboard peripherals\n"); + mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1"); + mxc_register_device(&mxc_uart_device1, &uart_pdata); +} diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c new file mode 100644 index 00000000000..9ef9566823f --- /dev/null +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> + +#include "devices.h" + +/* + * system init for baseboard usage. Will be called by mx31moboard init. + */ +void __init mx31moboard_marxbot_init(void) +{ + printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); +} diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index c29098af739..34c2a1b99d4 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -32,6 +32,7 @@ #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/board-mx31moboard.h> #include "devices.h" @@ -63,6 +64,18 @@ static struct platform_device *devices[] __initdata = { &mx31moboard_flash, }; +static int mxc_uart0_pins[] = { + MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, +}; +static int mxc_uart4_pins[] = { + MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, +}; + +static int mx31moboard_baseboard; +core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); + /* * Board specific initialization. */ @@ -70,58 +83,29 @@ static void __init mxc_board_init(void) { platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_mode(MX31_PIN_CTS1__CTS1); - mxc_iomux_mode(MX31_PIN_RTS1__RTS1); - mxc_iomux_mode(MX31_PIN_TXD1__TXD1); - mxc_iomux_mode(MX31_PIN_RXD1__RXD1); - + mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_iomux_mode(MX31_PIN_CTS2__CTS2); - mxc_iomux_mode(MX31_PIN_RTS2__RTS2); - mxc_iomux_mode(MX31_PIN_TXD2__TXD2); - mxc_iomux_mode(MX31_PIN_RXD2__RXD2); - - mxc_register_device(&mxc_uart_device1, &uart_pdata); - - mxc_iomux_mode(MX31_PIN_PC_RST__CTS5); - mxc_iomux_mode(MX31_PIN_PC_VS2__RTS5); - mxc_iomux_mode(MX31_PIN_PC_BVD2__TXD5); - mxc_iomux_mode(MX31_PIN_PC_BVD1__RXD5); - + mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4"); mxc_register_device(&mxc_uart_device4, &uart_pdata); -} -/* - * This structure defines static mappings for the mx31moboard. - */ -static struct map_desc mx31moboard_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, -}; - -/* - * Set up static virtual mappings. - */ -void __init mx31moboard_map_io(void) -{ - mxc_map_io(); - iotable_init(mx31moboard_io_desc, ARRAY_SIZE(mx31moboard_io_desc)); + switch (mx31moboard_baseboard) { + case MX31NOBOARD: + break; + case MX31DEVBOARD: + mx31moboard_devboard_init(); + break; + case MX31MARXBOT: + mx31moboard_marxbot_init(); + break; + default: + printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard); + } } static void __init mx31moboard_timer_init(void) { - mxc_clocks_init(26000000); - mxc_timer_init("ipg_clk.0"); + mx31_clocks_init(26000000); } struct sys_timer mx31moboard_timer = { @@ -133,7 +117,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mx31moboard_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31moboard_timer, diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c index d464d068a4a..bc63f178569 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mx31pdk.c @@ -45,40 +45,17 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - mxc_iomux_mode(MX31_PIN_CTS1__CTS1); - mxc_iomux_mode(MX31_PIN_RTS1__RTS1); - mxc_iomux_mode(MX31_PIN_TXD1__TXD1); - mxc_iomux_mode(MX31_PIN_RXD1__RXD1); - - mxc_register_device(&mxc_uart_device0, &uart_pdata); -} - -/*! - * This structure defines static mappings for the i.MX31PDK board. - */ -static struct map_desc mx31pdk_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, +static int uart_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1 }; -/*! - * Set up static virtual mappings. - */ -static void __init mx31pdk_map_io(void) +static inline void mxc_init_imx_uart(void) { - mxc_map_io(); - iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc)); + mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); } /*! @@ -91,8 +68,7 @@ static void __init mxc_board_init(void) static void __init mx31pdk_timer_init(void) { - mxc_clocks_init(26000000); - mxc_timer_init("ipg_clk.0"); + mx31_clocks_init(26000000); } static struct sys_timer mx31pdk_timer = { @@ -108,7 +84,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = mx31pdk_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &mx31pdk_timer, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 8cea8258722..5fce022114d 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -26,6 +26,8 @@ #include <linux/gpio.h> #include <linux/smc911x.h> #include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -37,6 +39,10 @@ #include <mach/iomux-mx3.h> #include <mach/board-pcm037.h> #include <mach/mxc_nand.h> +#include <mach/mmc.h> +#ifdef CONFIG_I2C_IMX +#include <mach/i2c.h> +#endif #include "devices.h" @@ -117,12 +123,90 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { .hw_ecc = 1, }; +#ifdef CONFIG_I2C_IMX +static int i2c_1_pins[] = { + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, +}; + +static int pcm037_i2c_1_init(struct device *dev) +{ + return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins), + "i2c-1"); +} + +static void pcm037_i2c_1_exit(struct device *dev) +{ + mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins)); +} + +static struct imxi2c_platform_data pcm037_i2c_1_data = { + .bitrate = 100000, + .init = pcm037_i2c_1_init, + .exit = pcm037_i2c_1_exit, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pcm037_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563", + } +}; +#endif + +static int sdhc1_pins[] = { + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, +}; + +static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data) +{ + return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins), + "sdhc-1"); +} + +static void pcm970_sdhc1_exit(struct device *dev, void *data) +{ + mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins)); +} + +/* No card and rw detection at the moment */ +static struct imxmmc_platform_data sdhc_pdata = { + .init = pcm970_sdhc1_init, + .exit = pcm970_sdhc1_exit, +}; + static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_eth, &pcm037_sram_device, }; +static int uart0_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1 +}; + +static int uart2_pins[] = { + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3 +}; + /* * Board specific initialization. */ @@ -130,59 +214,33 @@ static void __init mxc_board_init(void) { platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_iomux_mode(MX31_PIN_CTS1__CTS1); - mxc_iomux_mode(MX31_PIN_RTS1__RTS1); - mxc_iomux_mode(MX31_PIN_TXD1__TXD1); - mxc_iomux_mode(MX31_PIN_RXD1__RXD1); - + mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3); - mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3); - + mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2"); mxc_register_device(&mxc_uart_device2, &uart_pdata); - mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE); + mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); /* SMSC9215 IRQ pin */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)); - if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth")) + if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), + "pcm037-eth")) gpio_direction_input(MX31_PIN_GPIO3_1); - mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); -} +#ifdef CONFIG_I2C_IMX + i2c_register_board_info(1, pcm037_i2c_devices, + ARRAY_SIZE(pcm037_i2c_devices)); -/* - * This structure defines static mappings for the pcm037 board. - */ -static struct map_desc pcm037_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, -}; - -/* - * Set up static virtual mappings. - */ -void __init pcm037_map_io(void) -{ - mxc_map_io(); - iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc)); + mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data); +#endif + mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); } static void __init pcm037_timer_init(void) { - mxc_clocks_init(26000000); - mxc_timer_init("ipg_clk.0"); + mx31_clocks_init(26000000); } struct sys_timer pcm037_timer = { @@ -194,7 +252,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = pcm037_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &pcm037_timer, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c new file mode 100644 index 00000000000..6c4283cec6f --- /dev/null +++ b/arch/arm/mach-mx3/qong.c @@ -0,0 +1,312 @@ +/* + * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/memory.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <mach/common.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <mach/board-qong.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include "devices.h" + +/* FPGA defines */ +#define QONG_FPGA_VERSION(major, minor, rev) \ + (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) + +#define QONG_FPGA_BASEADDR CS1_BASE_ADDR +#define QONG_FPGA_PERIPH_SIZE (1 << 24) + +#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR +#define QONG_FPGA_CTRL_SIZE 0x10 +/* FPGA control registers */ +#define QONG_FPGA_CTRL_VERSION 0x00 + +#define QONG_DNET_ID 1 +#define QONG_DNET_BASEADDR \ + (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) +#define QONG_DNET_SIZE 0x00001000 + +#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1) + +/* + * This file contains the board-specific initialization routines. + */ + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static int uart_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1 +}; + +static inline void mxc_init_imx_uart(void) +{ + mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), + "uart-0"); + mxc_register_device(&mxc_uart_device0, &uart_pdata); +} + +static struct resource dnet_resources[] = { + [0] = { + .name = "dnet-memory", + .start = QONG_DNET_BASEADDR, + .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = QONG_FPGA_IRQ, + .end = QONG_FPGA_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dnet_device = { + .name = "dnet", + .id = -1, + .num_resources = ARRAY_SIZE(dnet_resources), + .resource = dnet_resources, +}; + +static int __init qong_init_dnet(void) +{ + int ret; + + ret = platform_device_register(&dnet_device); + return ret; +} + +/* MTD NOR flash */ + +static struct physmap_flash_data qong_flash_data = { + .width = 2, +}; + +static struct resource qong_flash_resource = { + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device qong_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &qong_flash_data, + }, + .resource = &qong_flash_resource, + .num_resources = 1, +}; + +static void qong_init_nor_mtd(void) +{ + (void)platform_device_register(&qong_nor_mtd_device); +} + +/* + * Hardware specific access to control-lines + */ +static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *nand_chip = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24)); + else + writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23)); +} + +/* + * Read the Device Ready pin. + */ +static int qong_nand_device_ready(struct mtd_info *mtd) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB)); +} + +static void qong_nand_select_chip(struct mtd_info *mtd, int chip) +{ + if (chip >= 0) + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); + else + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1); +} + +static struct platform_nand_data qong_nand_data = { + .chip = { + .chip_delay = 20, + .options = 0, + }, + .ctrl = { + .cmd_ctrl = qong_nand_cmd_ctrl, + .dev_ready = qong_nand_device_ready, + .select_chip = qong_nand_select_chip, + } +}; + +static struct resource qong_nand_resource = { + .start = CS3_BASE_ADDR, + .end = CS3_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device qong_nand_device = { + .name = "gen_nand", + .id = -1, + .dev = { + .platform_data = &qong_nand_data, + }, + .num_resources = 1, + .resource = &qong_nand_resource, +}; + +static void __init qong_init_nand_mtd(void) +{ + /* init CS */ + __raw_writel(0x00004f00, CSCR_U(3)); + __raw_writel(0x20013b31, CSCR_L(3)); + __raw_writel(0x00020800, CSCR_A(3)); + mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); + + /* enable pin */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO)); + if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable")) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); + + /* ready/busy pin */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO)); + if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy")) + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB)); + + /* write protect pin */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO)); + if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp")) + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B)); + + platform_device_register(&qong_nand_device); +} + +static void __init qong_init_fpga(void) +{ + void __iomem *regs; + u32 fpga_ver; + + regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE); + if (!regs) { + printk(KERN_ERR "%s: failed to map registers, aborting.\n", + __func__); + return; + } + + fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION); + iounmap(regs); + printk(KERN_INFO "Qong FPGA version %d.%d.%d\n", + (fpga_ver & 0xF000) >> 12, + (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF); + if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) { + printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based " + "devices won't be registered!\n"); + return; + } + + /* register FPGA-based devices */ + qong_init_nand_mtd(); + qong_init_dnet(); +} + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc qong_io_desc[] __initdata = { + { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_DEVICE_NONSHARED + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_DEVICE_NONSHARED + } +}; + +/* + * Set up static virtual mappings. + */ +static void __init qong_map_io(void) +{ + mxc_map_io(); + iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc)); +} + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_init_imx_uart(); + qong_init_nor_mtd(); + qong_init_fpga(); +} + +static void __init qong_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer qong_timer = { + .init = qong_timer_init, +}; + +/* + * The following uses standard kernel macros defined in arch.h in order to + * initialize __mach_desc_QONG data structure. + */ + +MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") + /* Maintainer: DENX Software Engineering GmbH */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = qong_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &qong_timer, +MACHINE_END diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h index 6c1023b8a9a..dc7b4bc003c 100644 --- a/arch/arm/mach-netx/include/mach/system.h +++ b/arch/arm/mach-netx/include/mach/system.h @@ -28,7 +28,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, NETX_SYSTEM_RES_CR); diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h index e2068c57415..1561588ca36 100644 --- a/arch/arm/mach-ns9xxx/include/mach/system.h +++ b/arch/arm/mach-ns9xxx/include/mach/system.h @@ -20,7 +20,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { #ifdef CONFIG_PROCESSOR_NS9360 if (processor_is_ns9360()) diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index 22e0eb6e9ec..feb0e54a91d 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -63,7 +63,6 @@ static struct irq_chip ns9xxx_chip = { #else static void handle_prio_irq(unsigned int irq, struct irq_desc *desc) { - unsigned int cpu = smp_processor_id(); struct irqaction *action; irqreturn_t action_ret; @@ -72,7 +71,7 @@ static void handle_prio_irq(unsigned int irq, struct irq_desc *desc) BUG_ON(desc->status & IRQ_INPROGRESS); desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); - kstat_cpu(cpu).irqs[irq]++; + kstat_incr_irqs_this_cpu(irq, desc); action = desc->action; if (unlikely(!action || (desc->status & IRQ_DISABLED))) diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 10a301e3243..3f325d3718a 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -7,6 +7,11 @@ config ARCH_OMAP730 select CPU_ARM926T select ARCH_OMAP_OTG +config ARCH_OMAP850 + depends on ARCH_OMAP1 + bool "OMAP850 Based System" + select CPU_ARM926T + config ARCH_OMAP15XX depends on ARCH_OMAP1 default y @@ -46,6 +51,12 @@ config MACH_OMAP_H3 TI OMAP 1710 H3 board support. Say Y here if you have such a board. +config MACH_OMAP_HTCWIZARD + bool "HTC Wizard" + depends on ARCH_OMAP850 + help + HTC Wizard smartphone support (AKA QTEK 9100, ...) + config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX @@ -163,7 +174,7 @@ config OMAP_ARM_216MHZ config OMAP_ARM_195MHZ bool "OMAP ARM 195 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850) help Enable 195MHz clock for OMAP CPU. If unsure, say N. @@ -175,13 +186,13 @@ config OMAP_ARM_192MHZ config OMAP_ARM_182MHZ bool "OMAP ARM 182 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850) help Enable 182MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_168MHZ bool "OMAP ARM 168 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) help Enable 168MHz clock for OMAP CPU. If unsure, say N. @@ -193,20 +204,20 @@ config OMAP_ARM_150MHZ config OMAP_ARM_120MHZ bool "OMAP ARM 120 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) help Enable 120MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_60MHZ bool "OMAP ARM 60 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) default y help Enable 60MHz clock for OMAP CPU. If unsure, say Y. config OMAP_ARM_30MHZ bool "OMAP ARM 30 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) help Enable 30MHz clock for OMAP CPU. If unsure, say N. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2e618391cc5..8b40aace9db 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -175,7 +175,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = { static struct omap_board_config_kernel ams_delta_config[] = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, { OMAP_TAG_UART, &ams_delta_uart_config }, - { OMAP_TAG_USB, &ams_delta_usb_config }, }; static struct resource ams_delta_kp_resources[] = { @@ -232,6 +231,7 @@ static void __init ams_delta_init(void) /* Clear latch2 (NAND, LCD, modem enable) */ ams_delta_latch2_write(~0, 0); + omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); } diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 30308294e7c..19e0e923233 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -34,7 +34,39 @@ #include <mach/keypad.h> #include <mach/common.h> #include <mach/board.h> -#include <mach/board-fsample.h> + +/* fsample is pretty close to p2-sample */ + +#define fsample_cpld_read(reg) __raw_readb(reg) +#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) + +#define FSAMPLE_CPLD_BASE 0xE8100000 +#define FSAMPLE_CPLD_SIZE SZ_4K +#define FSAMPLE_CPLD_START 0x05080000 + +#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) +#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) +#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) +#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) +#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) +#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) + +#define FSAMPLE_CPLD_BIT_BT_RESET 0 +#define FSAMPLE_CPLD_BIT_LCD_RESET 1 +#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 +#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 +#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 +#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 +#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 +#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 +#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 +#define FSAMPLE_CPLD_BIT_OTG_RESET 9 + +#define fsample_cpld_set(bit) \ + fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) + +#define fsample_cpld_clear(bit) \ + fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) static int fsample_keymap[] = { KEY(0,0,KEY_UP), diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 7d267020537..e724940e86f 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -62,7 +62,6 @@ static struct omap_uart_config generic_uart_config __initdata = { }; static struct omap_board_config_kernel generic_config[] __initdata = { - { OMAP_TAG_USB, NULL }, { OMAP_TAG_UART, &generic_uart_config }, }; @@ -70,12 +69,12 @@ static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { - generic_config[0].data = &generic1510_usb_config; + omap_usb_init(&generic1510_usb_config); } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (!cpu_is_omap1510()) { - generic_config[0].data = &generic1610_usb_config; + omap_usb_init(&generic1610_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 409fa56d0a8..44d4a966bed 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -19,6 +19,8 @@ #include <mach/mmc.h> #include <mach/gpio.h> +#include "board-h2.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 0d784a79509..f695aa053ac 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -46,6 +46,11 @@ #include <mach/keypad.h> #include <mach/common.h> +#include "board-h2.h" + +/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ +#define OMAP1610_ETHR_START 0x04000300 + static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -364,7 +369,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = { }; static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_USB, &h2_usb_config }, { OMAP_TAG_UART, &h2_uart_config }, { OMAP_TAG_LCD, &h2_lcd_config }, }; @@ -413,6 +417,7 @@ static void __init h2_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); + omap_usb_init(&h2_usb_config); h2_mmc_init(); } diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/mach-omap1/board-h2.h index 15531c8dc0e..315e2662547 100644 --- a/arch/arm/plat-omap/include/mach/board-h2.h +++ b/arch/arm/mach-omap1/board-h2.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/board-h2.h + * arch/arm/mach-omap1/board-h2.h * * Hardware definitions for TI OMAP1610 H2 board. * @@ -29,9 +29,6 @@ #ifndef __ASM_ARCH_OMAP_H2_H #define __ASM_ARCH_OMAP_H2_H -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define OMAP1610_ETHR_START 0x04000300 - #define H2_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) # define H2_TPS_GPIO_MMC_PWR_EN (H2_TPS_GPIO_BASE + 3) diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index fdfe793d56f..0d8a3c195e2 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -19,6 +19,8 @@ #include <mach/mmc.h> #include <mach/gpio.h> +#include "board-h3.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index bf08b6ad22e..4695965114c 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -50,6 +50,11 @@ #include <mach/dma.h> #include <mach/common.h> +#include "board-h3.h" + +/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ +#define OMAP1710_ETHR_START 0x04000300 + #define H3_TS_GPIO 48 static int h3_keymap[] = { @@ -418,7 +423,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = { }; static struct omap_board_config_kernel h3_config[] __initdata = { - { OMAP_TAG_USB, &h3_usb_config }, { OMAP_TAG_UART, &h3_uart_config }, { OMAP_TAG_LCD, &h3_lcd_config }, }; @@ -472,6 +476,7 @@ static void __init h3_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); + omap_usb_init(&h3_usb_config); h3_mmc_init(); } diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/mach-omap1/board-h3.h index 1888326da7e..78de535be3c 100644 --- a/arch/arm/plat-omap/include/mach/board-h3.h +++ b/arch/arm/mach-omap1/board-h3.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/board-h3.h + * arch/arm/mach-omap1/board-h3.h * * Copyright (C) 2001 RidgeRun, Inc. * Copyright (C) 2004 Texas Instruments, Inc. @@ -27,9 +27,6 @@ #ifndef __ASM_ARCH_OMAP_H3_H #define __ASM_ARCH_OMAP_H3_H -/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ -#define OMAP1710_ETHR_START 0x04000300 - #define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) # define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 071cd02a734..2fd98260ea4 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -39,6 +39,9 @@ #include <mach/common.h> #include <mach/mmc.h> +/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ +#define INNOVATOR1610_ETHR_START 0x04000300 + static int innovator_keymap[] = { KEY(0, 0, KEY_F1), KEY(0, 3, KEY_DOWN), @@ -370,7 +373,6 @@ static struct omap_uart_config innovator_uart_config __initdata = { }; static struct omap_board_config_kernel innovator_config[] = { - { OMAP_TAG_USB, NULL }, { OMAP_TAG_LCD, NULL }, { OMAP_TAG_UART, &innovator_uart_config }, }; @@ -392,13 +394,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { - innovator_config[0].data = &innovator1510_usb_config; + omap_usb_init(&innovator1510_usb_config); innovator_config[1].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { - innovator_config[0].data = &h2_usb_config; + omap_usb_init(&h2_usb_config); innovator_config[1].data = &innovator1610_lcd_config; } #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index af51e0b180f..7bc7a3cb9c5 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -233,10 +233,6 @@ static inline void nokia770_mmc_init(void) } #endif -static struct omap_board_config_kernel nokia770_config[] __initdata = { - { OMAP_TAG_USB, NULL }, -}; - #if defined(CONFIG_OMAP_DSP) /* * audio power control @@ -371,19 +367,16 @@ static __init int omap_dsp_init(void) static void __init omap_nokia770_init(void) { - nokia770_config[0].data = &nokia770_usb_config; - platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); - omap_board_config = nokia770_config; - omap_board_config_size = ARRAY_SIZE(nokia770_config); omap_gpio_init(); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); omap_dsp_init(); ads7846_dev_init(); mipid_dev_init(); + omap_usb_init(&nokia770_usb_config); nokia770_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 1a16ecb2ccc..cf3247b15f8 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -52,6 +52,20 @@ #include <mach/tc.h> #include <mach/common.h> +/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ +#define OMAP_OSK_ETHR_START 0x04800300 + +/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with + * alternate pin configurations for hardware-controlled blinking. + */ +#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) +# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) +# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) +# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) +# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) +# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) + static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -290,7 +304,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = { #endif static struct omap_board_config_kernel osk_config[] __initdata = { - { OMAP_TAG_USB, &osk_usb_config }, { OMAP_TAG_UART, &osk_uart_config }, #ifdef CONFIG_OMAP_OSK_MISTRAL { OMAP_TAG_LCD, &osk_lcd_config }, @@ -541,6 +554,8 @@ static void __init osk_init(void) l |= (3 << 1); omap_writel(l, USB_TRANSCEIVER_CTRL); + omap_usb_init(&osk_usb_config); + /* irq for tps65010 chip */ /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 99f2b43f254..886b4c0569b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -43,6 +43,21 @@ #include <mach/keypad.h> #include <mach/common.h> +#define PALMTE_USBDETECT_GPIO 0 +#define PALMTE_USB_OR_DC_GPIO 1 +#define PALMTE_TSC_GPIO 4 +#define PALMTE_PINTDAV_GPIO 6 +#define PALMTE_MMC_WP_GPIO 8 +#define PALMTE_MMC_POWER_GPIO 9 +#define PALMTE_HDQ_GPIO 11 +#define PALMTE_HEADPHONES_GPIO 14 +#define PALMTE_SPEAKER_GPIO 15 +#define PALMTE_DC_GPIO OMAP_MPUIO(2) +#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4) +#define PALMTE_MMC1_GPIO OMAP_MPUIO(6) +#define PALMTE_MMC2_GPIO OMAP_MPUIO(7) +#define PALMTE_MMC3_GPIO OMAP_MPUIO(11) + static void __init omap_palmte_init_irq(void) { omap1_init_common_hw(); @@ -286,7 +301,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) #endif static struct omap_board_config_kernel palmte_config[] __initdata = { - { OMAP_TAG_USB, &palmte_usb_config }, { OMAP_TAG_LCD, &palmte_lcd_config }, { OMAP_TAG_UART, &palmte_uart_config }, }; @@ -341,6 +355,7 @@ static void __init omap_palmte_init(void) spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); + omap_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 1cbc1275c95..4f1b44831d3 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -43,6 +43,13 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#define PALMTT_USBDETECT_GPIO 0 +#define PALMTT_CABLE_GPIO 1 +#define PALMTT_LED_GPIO 3 +#define PALMTT_PENIRQ_GPIO 6 +#define PALMTT_MMC_WP_GPIO 8 +#define PALMTT_HDQ_GPIO 11 + static int palmtt_keymap[] = { KEY(0, 0, KEY_ESC), KEY(0, 1, KEY_SPACE), @@ -272,7 +279,6 @@ static struct omap_uart_config palmtt_uart_config __initdata = { }; static struct omap_board_config_kernel palmtt_config[] __initdata = { - { OMAP_TAG_USB, &palmtt_usb_config }, { OMAP_TAG_LCD, &palmtt_lcd_config }, { OMAP_TAG_UART, &palmtt_uart_config }, }; @@ -297,6 +303,7 @@ static void __init omap_palmtt_init(void) spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); + omap_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index baf5efbfe3e..9a55c3c5821 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -46,6 +46,16 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#define PALMZ71_USBDETECT_GPIO 0 +#define PALMZ71_PENIRQ_GPIO 6 +#define PALMZ71_MMC_WP_GPIO 8 +#define PALMZ71_HDQ_GPIO 11 + +#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) +#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) +#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) +#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) + static void __init omap_palmz71_init_irq(void) { @@ -239,7 +249,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = { }; static struct omap_board_config_kernel palmz71_config[] __initdata = { - {OMAP_TAG_USB, &palmz71_usb_config}, {OMAP_TAG_LCD, &palmz71_lcd_config}, {OMAP_TAG_UART, &palmz71_uart_config}, }; @@ -313,6 +322,7 @@ omap_palmz71_init(void) spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); + omap_usb_init(&palmz71_usb_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 66a4d7d5255..58a46e4e45c 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -17,6 +17,7 @@ #include <mach/hardware.h> #include <mach/mmc.h> #include <mach/gpio.h> +#include <mach/board-sx1.h> #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 28c76a1e71c..c096577695f 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -41,6 +41,7 @@ #include <mach/board.h> #include <mach/common.h> #include <mach/keypad.h> +#include <mach/board-sx1.h> /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -373,7 +374,6 @@ static struct omap_uart_config sx1_uart_config __initdata = { }; static struct omap_board_config_kernel sx1_config[] __initdata = { - { OMAP_TAG_USB, &sx1_usb_config }, { OMAP_TAG_LCD, &sx1_lcd_config }, { OMAP_TAG_UART, &sx1_uart_config }, }; @@ -388,6 +388,7 @@ static void __init omap_sx1_init(void) omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + omap_usb_init(&sx1_usb_config); sx1_mmc_init(); /* turn on USB power */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index a7653542a2b..98275e03dad 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -145,7 +145,6 @@ static struct omap_uart_config voiceblue_uart_config __initdata = { }; static struct omap_board_config_kernel voiceblue_config[] = { - { OMAP_TAG_USB, &voiceblue_usb_config }, { OMAP_TAG_UART, &voiceblue_uart_config }, }; @@ -185,6 +184,7 @@ static void __init voiceblue_init(void) omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); + omap_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); /* There is a good chance board is going up, so enable power LED diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 5fba2073171..dafe4f71d15 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -20,41 +20,161 @@ #include <linux/io.h> #include <asm/mach-types.h> +#include <asm/clkdev.h> #include <mach/cpu.h> #include <mach/usb.h> #include <mach/clock.h> #include <mach/sram.h> +static const struct clkops clkops_generic; +static const struct clkops clkops_uart; +static const struct clkops clkops_dspck; + #include "clock.h" +static int clk_omap1_dummy_enable(struct clk *clk) +{ + return 0; +} + +static void clk_omap1_dummy_disable(struct clk *clk) +{ +} + +static const struct clkops clkops_dummy = { + .enable = clk_omap1_dummy_enable, + .disable = clk_omap1_dummy_disable, +}; + +static struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_dummy, + .flags = RATE_FIXED, +}; + +struct omap_clk { + u32 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +#define CK_310 (1 << 0) +#define CK_730 (1 << 1) +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) + +static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + /* CK_GEN2 clocks */ + CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), + CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx, CK_16XX), + CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + /* Virtual clocks */ + CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), +}; + +static int omap1_clk_enable_generic(struct clk * clk); +static int omap1_clk_enable(struct clk *clk); +static void omap1_clk_disable_generic(struct clk * clk); +static void omap1_clk_disable(struct clk *clk); + __u32 arm_idlect1_mask; /*------------------------------------------------------------------------- * Omap1 specific clock functions *-------------------------------------------------------------------------*/ -static void omap1_watchdog_recalc(struct clk * clk) +static unsigned long omap1_watchdog_recalc(struct clk *clk) { - clk->rate = clk->parent->rate / 14; + return clk->parent->rate / 14; } -static void omap1_uart_recalc(struct clk * clk) +static unsigned long omap1_uart_recalc(struct clk *clk) { - unsigned int val = omap_readl(clk->enable_reg); - if (val & clk->enable_bit) - clk->rate = 48000000; - else - clk->rate = 12000000; + unsigned int val = __raw_readl(clk->enable_reg); + return val & clk->enable_bit ? 48000000 : 12000000; } -static void omap1_sossi_recalc(struct clk *clk) +static unsigned long omap1_sossi_recalc(struct clk *clk) { u32 div = omap_readl(MOD_CONF_CTRL_1); div = (div >> 17) & 0x7; div++; - clk->rate = clk->parent->rate / div; + + return clk->parent->rate / div; } static int omap1_clk_enable_dsp_domain(struct clk *clk) @@ -78,6 +198,11 @@ static void omap1_clk_disable_dsp_domain(struct clk *clk) } } +static const struct clkops clkops_dspck = { + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + static int omap1_clk_enable_uart_functional(struct clk *clk) { int ret; @@ -105,6 +230,11 @@ static void omap1_clk_disable_uart_functional(struct clk *clk) omap1_clk_disable_generic(clk); } +static const struct clkops clkops_uart = { + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, +}; + static void omap1_clk_allow_idle(struct clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -197,9 +327,6 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) struct clk * parent; unsigned dsor_exp; - if (unlikely(!(clk->flags & RATE_CKCTL))) - return -EINVAL; - parent = clk->parent; if (unlikely(parent == NULL)) return -EIO; @@ -215,22 +342,15 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } -static void omap1_ckctl_recalc(struct clk * clk) +static unsigned long omap1_ckctl_recalc(struct clk *clk) { - int dsor; - /* Calculate divisor encoded as 2-bit exponent */ - dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); + int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - if (unlikely(clk->rate == clk->parent->rate / dsor)) - return; /* No change, quick exit */ - clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + return clk->parent->rate / dsor; } -static void omap1_ckctl_recalc_dsp_domain(struct clk * clk) +static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) { int dsor; @@ -245,12 +365,7 @@ static void omap1_ckctl_recalc_dsp_domain(struct clk * clk) dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); omap1_clk_disable(&api_ck.clk); - if (unlikely(clk->rate == clk->parent->rate / dsor)) - return; /* No change, quick exit */ - clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + return clk->parent->rate / dsor; } /* MPU virtual clock functions */ @@ -289,35 +404,57 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); ck_dpll1.rate = ptr->pll_rate; - propagate_rate(&ck_dpll1); return 0; } static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) { - int ret = -EINVAL; - int dsor_exp; - __u16 regval; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp > 3) - dsor_exp = -EINVAL; - if (dsor_exp < 0) - return dsor_exp; - - regval = __raw_readw(DSP_CKCTL); - regval &= ~(3 << clk->rate_offset); - regval |= dsor_exp << clk->rate_offset; - __raw_writew(regval, DSP_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); - ret = 0; - } + int dsor_exp; + u16 regval; - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; - return ret; + regval = __raw_readw(DSP_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + __raw_writew(regval, DSP_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + + return 0; +} + +static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +{ + int dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp < 0) + return dsor_exp; + if (dsor_exp > 3) + dsor_exp = 3; + return clk->parent->rate / (1 << dsor_exp); +} + +static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +{ + int dsor_exp; + u16 regval; + + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = omap_readw(ARM_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + regval = verify_ckctl_value(regval); + omap_writew(regval, ARM_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + return 0; } static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) @@ -372,14 +509,14 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) { unsigned int val; - val = omap_readl(clk->enable_reg); + val = __raw_readl(clk->enable_reg); if (rate == 12000000) val &= ~(1 << clk->enable_bit); else if (rate == 48000000) val |= (1 << clk->enable_bit); else return -EINVAL; - omap_writel(val, clk->enable_reg); + __raw_writel(val, clk->enable_reg); clk->rate = rate; return 0; @@ -398,8 +535,8 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) else ratio_bits = (dsor - 2) << 2; - ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; - omap_writew(ratio_bits, clk->enable_reg); + ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd; + __raw_writew(ratio_bits, clk->enable_reg); return 0; } @@ -423,8 +560,6 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) omap_writel(l, MOD_CONF_CTRL_1); clk->rate = p_rate / (div + 1); - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); return 0; } @@ -440,8 +575,8 @@ static void omap1_init_ext_clk(struct clk * clk) __u16 ratio_bits; /* Determine current rate and ensure clock is based on 96MHz APLL */ - ratio_bits = omap_readw(clk->enable_reg) & ~1; - omap_writew(ratio_bits, clk->enable_reg); + ratio_bits = __raw_readw(clk->enable_reg) & ~1; + __raw_writew(ratio_bits, clk->enable_reg); ratio_bits = (ratio_bits & 0xfc) >> 2; if (ratio_bits > 6) @@ -468,7 +603,7 @@ static int omap1_clk_enable(struct clk *clk) omap1_clk_deny_idle(clk->parent); } - ret = clk->enable(clk); + ret = clk->ops->enable(clk); if (unlikely(ret != 0) && clk->parent) { omap1_clk_disable(clk->parent); @@ -482,7 +617,7 @@ static int omap1_clk_enable(struct clk *clk) static void omap1_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { - clk->disable(clk); + clk->ops->disable(clk); if (likely(clk->parent)) { omap1_clk_disable(clk->parent); if (clk->flags & CLOCK_NO_IDLE_PARENT) @@ -496,9 +631,6 @@ static int omap1_clk_enable_generic(struct clk *clk) __u16 regval16; __u32 regval32; - if (clk->flags & ALWAYS_ENABLED) - return 0; - if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); @@ -506,25 +638,13 @@ static int omap1_clk_enable_generic(struct clk *clk) } if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } + regval16 = __raw_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); } return 0; @@ -539,44 +659,26 @@ static void omap1_clk_disable_generic(struct clk *clk) return; if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } + regval16 = __raw_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); } } +static const struct clkops clkops_generic = { + .enable = &omap1_clk_enable_generic, + .disable = &omap1_clk_disable_generic, +}; + static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { - int dsor_exp; - if (clk->flags & RATE_FIXED) return clk->rate; - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp < 0) - return dsor_exp; - if (dsor_exp > 3) - dsor_exp = 3; - return clk->parent->rate / (1 << dsor_exp); - } - if (clk->round_rate != NULL) return clk->round_rate(clk, rate); @@ -586,30 +688,9 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EINVAL; - int dsor_exp; - __u16 regval; if (clk->set_rate) ret = clk->set_rate(clk, rate); - else if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp > 3) - dsor_exp = -EINVAL; - if (dsor_exp < 0) - return dsor_exp; - - regval = omap_readw(ARM_CKCTL); - regval &= ~(3 << clk->rate_offset); - regval |= dsor_exp << clk->rate_offset; - regval = verify_ckctl_value(regval); - omap_writew(regval, ARM_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); - ret = 0; - } - - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); - return ret; } @@ -632,17 +713,10 @@ static void __init omap1_clk_disable_unused(struct clk *clk) } /* Is the clock already disabled? */ - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(clk->enable_reg); - else - regval32 = omap_readl(clk->enable_reg); - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(clk->enable_reg); - else - regval32 = omap_readw(clk->enable_reg); - } + if (clk->flags & ENABLE_REG_32BIT) + regval32 = __raw_readl(clk->enable_reg); + else + regval32 = __raw_readw(clk->enable_reg); if ((regval32 & (1 << clk->enable_bit)) == 0) return; @@ -659,7 +733,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk) } printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); - clk->disable(clk); + clk->ops->disable(clk); printk(" done\n"); } @@ -677,10 +751,10 @@ static struct clk_functions omap1_clk_functions = { int __init omap1_clk_init(void) { - struct clk ** clkp; + struct omap_clk *c; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ - u32 reg; + u32 reg, cpu_mask; #ifdef CONFIG_DEBUG_LL /* Resets some clocks that may be left on from bootloader, @@ -700,27 +774,24 @@ int __init omap1_clk_init(void) /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { - clk_register(*clkp); - continue; - } + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + clk_init_one(c->lk.clk); - if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) { - clk_register(*clkp); - continue; + cpu_mask = 0; + if (cpu_is_omap16xx()) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; + if (cpu_is_omap730()) + cpu_mask |= CK_730; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); } - } info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); if (info != NULL) { @@ -769,7 +840,6 @@ int __init omap1_clk_init(void) } } } - propagate_rate(&ck_dpll1); #else /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { @@ -778,9 +848,9 @@ int __init omap1_clk_init(void) omap_writew(0x2290, DPLL_CTL); omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; - propagate_rate(&ck_dpll1); } #endif + propagate_rate(&ck_dpll1); /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " @@ -832,4 +902,3 @@ int __init omap1_clk_init(void) return 0; } - diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index c1dcdf18d8d..17f87427125 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -13,27 +13,22 @@ #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H #define __ARCH_ARM_MACH_OMAP1_CLOCK_H -static int omap1_clk_enable_generic(struct clk * clk); -static void omap1_clk_disable_generic(struct clk * clk); -static void omap1_ckctl_recalc(struct clk * clk); -static void omap1_watchdog_recalc(struct clk * clk); +static unsigned long omap1_ckctl_recalc(struct clk *clk); +static unsigned long omap1_watchdog_recalc(struct clk *clk); static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -static void omap1_sossi_recalc(struct clk *clk); -static void omap1_ckctl_recalc_dsp_domain(struct clk * clk); -static int omap1_clk_enable_dsp_domain(struct clk * clk); +static unsigned long omap1_sossi_recalc(struct clk *clk); +static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); -static void omap1_clk_disable_dsp_domain(struct clk * clk); static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); -static void omap1_uart_recalc(struct clk * clk); -static int omap1_clk_enable_uart_functional(struct clk * clk); -static void omap1_clk_disable_uart_functional(struct clk * clk); +static unsigned long omap1_uart_recalc(struct clk *clk); static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); static void omap1_init_ext_clk(struct clk * clk); static int omap1_select_table_rate(struct clk * clk, unsigned long rate); static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); -static int omap1_clk_enable(struct clk *clk); -static void omap1_clk_disable(struct clk *clk); + +static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); +static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); struct mpu_rate { unsigned long rate; @@ -152,101 +147,84 @@ static struct mpu_rate rate_table[] = { static struct clk ck_ref = { .name = "ck_ref", + .ops = &clkops_null, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | ALWAYS_ENABLED, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk ck_dpll1 = { .name = "ck_dpll1", + .ops = &clkops_null, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk ck_dpll1out = { .clk = { .name = "ck_dpll1out", + .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL | - ENABLE_REG_32BIT | RATE_PROPAGATES, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 12, }; static struct clk sossi_ck = { .name = "ck_sossi", + .ops = &clkops_generic, .parent = &ck_dpll1out.clk, - .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT | - ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_1, + .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), .enable_bit = 16, .recalc = &omap1_sossi_recalc, .set_rate = &omap1_set_sossi_rate, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk arm_ck = { .name = "arm_ck", + .ops = &clkops_null, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES | - ALWAYS_ENABLED, .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct arm_idlect1_clk armper_ck = { .clk = { .name = "armper_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_CKCTL | - CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }, .idlect_shift = 2, }; static struct clk arm_gpio_ck = { .name = "arm_gpio_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_GPIOCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk armxor_ck = { .clk = { .name = "armxor_ck", + .ops = &clkops_generic, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 1, }; @@ -254,14 +232,12 @@ static struct arm_idlect1_clk armxor_ck = { static struct arm_idlect1_clk armtim_ck = { .clk = { .name = "armtim_ck", + .ops = &clkops_generic, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 9, }; @@ -269,201 +245,166 @@ static struct arm_idlect1_clk armtim_ck = { static struct arm_idlect1_clk armwdt_ck = { .clk = { .name = "armwdt_ck", + .ops = &clkops_generic, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_WDTCK, .recalc = &omap1_watchdog_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 0, }; static struct clk arminth_ck16xx = { .name = "arminth_ck", + .ops = &clkops_null, .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, /* Note: On 16xx the frequency can be divided by 2 by programming * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 * * 1510 version is in TC clocks. */ - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dsp_ck = { .name = "dsp_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, - .enable_reg = (void __iomem *)ARM_CKCTL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), .enable_bit = EN_DSPCK, .rate_offset = CKCTL_DSPDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct clk dspmmu_ck = { .name = "dspmmu_ck", + .ops = &clkops_null, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | ALWAYS_ENABLED, .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct clk dspper_ck = { .name = "dspper_ck", + .ops = &clkops_dspck, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc_dsp_domain, + .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = &omap1_clk_set_rate_dsp_domain, - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, }; static struct clk dspxor_ck = { .name = "dspxor_ck", + .ops = &clkops_dspck, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, }; static struct clk dsptim_ck = { .name = "dsptim_ck", + .ops = &clkops_dspck, .parent = &ck_ref, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_IO_ADDRESS, .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, }; /* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ static struct arm_idlect1_clk tc_ck = { .clk = { .name = "tc_ck", + .ops = &clkops_null, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 | - RATE_CKCTL | RATE_PROPAGATES | - ALWAYS_ENABLED | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }, .idlect_shift = 6, }; static struct clk arminth_ck1510 = { .name = "arminth_ck", + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ALWAYS_ENABLED, .recalc = &followparent_recalc, /* Note: On 1510 the frequency follows TC_CK * * 16xx version is in MPU clocks. */ - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk tipb_ck = { /* No-idle controlled by "tc_ck" */ .name = "tipb_ck", + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk l3_ocpi_ck = { /* No-idle controlled by "tc_ck" */ .name = "l3_ocpi_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_OCPI_CK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk tc1_ck = { .name = "tc1_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC1_CK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk tc2_ck = { .name = "tc2_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC2_CK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dma_ck = { /* No-idle controlled by "tc_ck" */ .name = "dma_ck", + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk dma_lcdfree_ck = { .name = "dma_lcdfree_ck", + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct arm_idlect1_clk api_ck = { .clk = { .name = "api_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_APICK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 8, }; @@ -471,276 +412,238 @@ static struct arm_idlect1_clk api_ck = { static struct arm_idlect1_clk lb_ck = { .clk = { .name = "lb_ck", + .ops = &clkops_generic, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LBCK, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }, .idlect_shift = 4, }; static struct clk rhea1_ck = { .name = "rhea1_ck", + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk rhea2_ck = { .name = "rhea2_ck", + .ops = &clkops_null, .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk lcd_ck_16xx = { .name = "lcd_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }; static struct arm_idlect1_clk lcd_ck_1510 = { .clk = { .name = "lcd_ck", + .ops = &clkops_generic, .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - RATE_CKCTL | CLOCK_IDLE_CONTROL, - .enable_reg = (void __iomem *)ARM_IDLECT2, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, .recalc = &omap1_ckctl_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, }, .idlect_shift = 3, }; static struct clk uart1_1510 = { .name = "uart1_ck", + .ops = &clkops_null, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ENABLE_REG_32BIT | ALWAYS_ENABLED | - CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct uart_clk uart1_16xx = { .clk = { .name = "uart1_ck", + .ops = &clkops_uart, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | - ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 29, - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, }, .sysc_addr = 0xfffb0054, }; static struct clk uart2_ck = { .name = "uart2_ck", + .ops = &clkops_null, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | ENABLE_REG_32BIT | - ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk uart3_1510 = { .name = "uart3_ck", + .ops = &clkops_null, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - ENABLE_REG_32BIT | ALWAYS_ENABLED | - CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct uart_clk uart3_16xx = { .clk = { .name = "uart3_ck", + .ops = &clkops_uart, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | - ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 31, - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, }, .sysc_addr = 0xfffb9854, }; static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ .name = "usb_clko", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 6000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), .enable_bit = USB_MCLK_EN_BIT, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk usb_hhc_ck1510 = { .name = "usb_hhc_ck", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = USB_HOST_HHC_UHOST_EN, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk usb_hhc_ck16xx = { .name = "usb_hhc_ck", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */, + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ .enable_bit = 8 /* UHOST_EN */, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk usb_dc_ck = { .name = "usb_dc_ck", + .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, - .enable_reg = (void __iomem *)SOFT_REQ_REG, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 4, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk mclk_1510 = { .name = "mclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, - .enable_reg = (void __iomem *)SOFT_REQ_REG, - .enable_bit = 6, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 6, }; static struct clk mclk_16xx = { .name = "mclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL, + .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), .enable_bit = COM_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, .round_rate = &omap1_round_ext_clk_rate, .init = &omap1_init_ext_clk, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk bclk_1510 = { .name = "bclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, + .flags = RATE_FIXED, }; static struct clk bclk_16xx = { .name = "bclk", + .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL, + .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), .enable_bit = SWD_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, .round_rate = &omap1_round_ext_clk_rate, .init = &omap1_init_ext_clk, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk mmc1_ck = { .name = "mmc_ck", + .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 23, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk mmc2_ck = { .name = "mmc_ck", .id = 1, + .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 20, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk virtual_ck_mpu = { .name = "mpu", - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED, + .ops = &clkops_null, .parent = &arm_ck, /* Is smarter alias for */ .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, .round_rate = &omap1_round_to_table_rate, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK @@ -748,78 +651,19 @@ remains active during MPU idle whenever this is enabled */ static struct clk i2c_fck = { .name = "i2c_fck", .id = 1, - .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | - ALWAYS_ENABLED, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, .parent = &armxor_ck.clk, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, }; static struct clk i2c_ick = { .name = "i2c_ick", .id = 1, - .flags = CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | - ALWAYS_ENABLED, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, .parent = &armper_ck.clk, .recalc = &followparent_recalc, - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, -}; - -static struct clk * onchip_clks[] = { - /* non-ULPD clocks */ - &ck_ref, - &ck_dpll1, - /* CK_GEN1 clocks */ - &ck_dpll1out.clk, - &sossi_ck, - &arm_ck, - &armper_ck.clk, - &arm_gpio_ck, - &armxor_ck.clk, - &armtim_ck.clk, - &armwdt_ck.clk, - &arminth_ck1510, &arminth_ck16xx, - /* CK_GEN2 clocks */ - &dsp_ck, - &dspmmu_ck, - &dspper_ck, - &dspxor_ck, - &dsptim_ck, - /* CK_GEN3 clocks */ - &tc_ck.clk, - &tipb_ck, - &l3_ocpi_ck, - &tc1_ck, - &tc2_ck, - &dma_ck, - &dma_lcdfree_ck, - &api_ck.clk, - &lb_ck.clk, - &rhea1_ck, - &rhea2_ck, - &lcd_ck_16xx, - &lcd_ck_1510.clk, - /* ULPD clocks */ - &uart1_1510, - &uart1_16xx.clk, - &uart2_ck, - &uart3_1510, - &uart3_16xx.clk, - &usb_clko, - &usb_hhc_ck1510, &usb_hhc_ck16xx, - &usb_dc_ck, - &mclk_1510, &mclk_16xx, - &bclk_1510, &bclk_16xx, - &mmc1_ck, - &mmc2_ck, - /* Virtual clocks */ - &virtual_ck_mpu, - &i2c_fck, - &i2c_ick, }; #endif diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index ba5d7c08dc1..bbbaeb0abcd 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -86,7 +86,7 @@ static struct resource mbox_resources[] = { }; static struct platform_device mbox_device = { - .name = "mailbox", + .name = "omap1-mailbox", .id = -1, .num_resources = ARRAY_SIZE(mbox_resources), .resource = mbox_resources, diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 89bb8756f45..4ef26faf083 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -38,6 +38,7 @@ static struct omap_id omap_ids[] __initdata = { { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000}, { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, + { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000}, { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000}, { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000}, @@ -77,7 +78,7 @@ static u16 __init omap_get_jtag_id(void) prod_id = omap_readl(OMAP_PRODUCTION_ID_1); omap_id = omap_readl(OMAP32_ID_1); - /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */ + /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */ if (((prod_id >> 20) == 0) || (prod_id == omap_id)) prod_id = 0; else @@ -178,6 +179,7 @@ void __init omap_check_revision(void) switch (cpu_type) { case 0x07: + case 0x08: omap_revision |= 0x07; break; case 0x03: diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 4c3e582f3d3..3afe540149f 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -52,6 +52,22 @@ static struct map_desc omap730_io_desc[] __initdata = { }; #endif +#ifdef CONFIG_ARCH_OMAP850 +static struct map_desc omap850_io_desc[] __initdata = { + { + .virtual = OMAP850_DSP_BASE, + .pfn = __phys_to_pfn(OMAP850_DSP_START), + .length = OMAP850_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP850_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP850_DSPREG_START), + .length = OMAP850_DSPREG_SIZE, + .type = MT_DEVICE + } +}; +#endif + #ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { @@ -109,6 +125,13 @@ void __init omap1_map_common_io(void) iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); } #endif + +#ifdef CONFIG_ARCH_OMAP850 + if (cpu_is_omap850()) { + iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); + } +#endif + #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 9ad5197075f..de03c844899 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -145,6 +145,14 @@ static struct omap_irq_bank omap730_irq_banks[] = { }; #endif +#ifdef CONFIG_ARCH_OMAP850 +static struct omap_irq_bank omap850_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, + { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, +}; +#endif + #ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, @@ -184,6 +192,12 @@ void __init omap_init_irq(void) irq_bank_count = ARRAY_SIZE(omap730_irq_banks); } #endif +#ifdef CONFIG_ARCH_OMAP850 + if (cpu_is_omap850()) { + irq_banks = omap850_irq_banks; + irq_bank_count = ARRAY_SIZE(omap850_irq_banks); + } +#endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; @@ -214,9 +228,8 @@ void __init omap_init_irq(void) irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); /* Enable interrupts in global mask */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); - } /* Install the interrupt handlers for each bank */ for (i = 0; i < irq_bank_count; i++) { @@ -236,6 +249,8 @@ void __init omap_init_irq(void) if (cpu_is_omap730()) omap_unmask_irq(INT_730_IH2_IRQ); + else if (cpu_is_omap850()) + omap_unmask_irq(INT_850_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 59abbf331a9..0af4d6c85b4 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -1,7 +1,7 @@ /* * Mailbox reservation modules for DSP * - * Copyright (C) 2006 Nokia Corporation + * Copyright (C) 2006-2009 Nokia Corporation * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> * * This file is subject to the terms and conditions of the GNU General Public @@ -27,7 +27,7 @@ #define MAILBOX_DSP2ARM1_Flag 0x1c #define MAILBOX_DSP2ARM2_Flag 0x20 -unsigned long mbox_base; +static void __iomem *mbox_base; struct omap_mbox1_fifo { unsigned long cmd; @@ -40,14 +40,14 @@ struct omap_mbox1_priv { struct omap_mbox1_fifo rx_fifo; }; -static inline int mbox_read_reg(unsigned int reg) +static inline int mbox_read_reg(size_t ofs) { - return __raw_readw(mbox_base + reg); + return __raw_readw(mbox_base + ofs); } -static inline void mbox_write_reg(unsigned int val, unsigned int reg) +static inline void mbox_write_reg(u32 val, size_t ofs) { - __raw_writew(val, mbox_base + reg); + __raw_writew(val, mbox_base + ofs); } /* msg */ @@ -143,7 +143,7 @@ struct omap_mbox mbox_dsp_info = { }; EXPORT_SYMBOL(mbox_dsp_info); -static int __init omap1_mbox_probe(struct platform_device *pdev) +static int __devinit omap1_mbox_probe(struct platform_device *pdev) { struct resource *res; int ret = 0; @@ -170,12 +170,10 @@ static int __init omap1_mbox_probe(struct platform_device *pdev) } mbox_dsp_info.irq = res->start; - ret = omap_mbox_register(&mbox_dsp_info); - - return ret; + return omap_mbox_register(&pdev->dev, &mbox_dsp_info); } -static int omap1_mbox_remove(struct platform_device *pdev) +static int __devexit omap1_mbox_remove(struct platform_device *pdev) { omap_mbox_unregister(&mbox_dsp_info); @@ -184,9 +182,9 @@ static int omap1_mbox_remove(struct platform_device *pdev) static struct platform_driver omap1_mbox_driver = { .probe = omap1_mbox_probe, - .remove = omap1_mbox_remove, + .remove = __devexit_p(omap1_mbox_remove), .driver = { - .name = "mailbox", + .name = "omap1-mailbox", }, }; @@ -203,4 +201,7 @@ static void __exit omap1_mbox_exit(void) module_init(omap1_mbox_init); module_exit(omap1_mbox_exit); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); +MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>); +MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 575ba31295c..d040c3f1027 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -28,9 +28,9 @@ #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) -const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; -#endif +static int dsp_use; +static struct clk *api_clk; +static struct clk *dsp_clk; static void omap1_mcbsp_request(unsigned int id) { @@ -39,20 +39,40 @@ static void omap1_mcbsp_request(unsigned int id) * are DSP public peripherals. */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { - omap_dsp_request_mem(); - /* - * DSP external peripheral reset - * FIXME: This should be moved to dsp code - */ - __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN | - DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2); + if (dsp_use++ == 0) { + api_clk = clk_get(NULL, "api_clk"); + dsp_clk = clk_get(NULL, "dsp_clk"); + if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { + clk_enable(api_clk); + clk_enable(dsp_clk); + + omap_dsp_request_mem(); + /* + * DSP external peripheral reset + * FIXME: This should be moved to dsp code + */ + __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN | + DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2); + } + } } } static void omap1_mcbsp_free(unsigned int id) { - if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) - omap_dsp_release_mem(); + if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { + if (--dsp_use == 0) { + omap_dsp_release_mem(); + if (!IS_ERR(api_clk)) { + clk_disable(api_clk); + clk_put(api_clk); + } + if (!IS_ERR(dsp_clk)) { + clk_disable(dsp_clk); + clk_put(dsp_clk); + } + } + } } static struct omap_mcbsp_ops omap1_mcbsp_ops = { @@ -94,8 +114,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, { .phys_base = OMAP1510_MCBSP2_BASE, @@ -112,8 +130,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, }; #define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata) @@ -131,8 +147,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, { .phys_base = OMAP1610_MCBSP2_BASE, @@ -149,8 +163,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 3, }, }; #define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata) diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 062c905c2ba..721e0d9d8b1 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -58,6 +58,25 @@ MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) #define OMAP730_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP730 */ +#ifdef CONFIG_ARCH_OMAP850 +struct pin_config __initdata_or_module omap850_pins[] = { +MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) +}; +#endif + #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { /* @@ -419,6 +438,11 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pull_name, cfg->pull_reg, pull_orig, pull); } + +#ifdef CONFIG_ARCH_OMAP850 + omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); +#endif + #endif #ifdef CONFIG_OMAP_MUX_ERRORS diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 0002084e065..842090b148f 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -121,6 +121,13 @@ void __init omap_serial_init(void) serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; } + if (cpu_is_omap850()) { + serial_platform_data[0].regshift = 0; + serial_platform_data[1].regshift = 0; + serial_platform_data[0].irq = INT_850_UART_MODEM_1; + serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; + } + if (cpu_is_omap15xx()) { serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16; serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 3754b79092a..64ab386a65c 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -58,4 +58,12 @@ config MACH_OVERO config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" - depends on ARCH_OMAP3 && ARCH_OMAP34XX
\ No newline at end of file + depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_3430SDP + bool "OMAP 3430 SDP board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_NOKIA_RX51 + bool "Nokia RX-51 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bbd12bc10fd..a2c3fcc27a2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \ +obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \ devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ clockdomain.o @@ -14,6 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o +# SMS/SDRC +obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o +# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o + # Power Management ifeq ($(CONFIG_PM),y) obj-y += pm.o @@ -38,4 +42,12 @@ obj-$(CONFIG_MACH_OVERO) += board-overo.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ mmc-twl4030.o +obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ + mmc-twl4030.o +obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ + board-rx51-peripherals.o \ +# Platform specific device init code +ifeq ($(CONFIG_USB_MUSB_SOC),y) +obj-y += usb-musb.o +endif diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 83fa37211d7..22143651037 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -35,12 +35,16 @@ #include <mach/board.h> #include <mach/common.h> #include <mach/gpmc.h> +#include <mach/usb.h> #include "mmc-twl4030.h" +#define SDP2430_CS0_BASE 0x04000000 #define SDP2430_FLASH_CS 0 #define SDP2430_SMC91X_CS 5 +#define SDP2430_ETHR_GPIO_IRQ 149 + static struct mtd_partition sdp2430_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -102,8 +106,8 @@ static struct resource sdp2430_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -170,13 +174,13 @@ static inline void __init sdp2430_init_smc91x(void) sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f; udelay(100); - if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { + if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - OMAP24XX_ETHR_GPIO_IRQ); + SDP2430_ETHR_GPIO_IRQ); gpmc_cs_free(eth_cs); goto out; } - gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ); + gpio_direction_input(SDP2430_ETHR_GPIO_IRQ); out: clk_disable(gpmc_fck); @@ -185,7 +189,7 @@ out: static void __init omap_2430sdp_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); sdp2430_init_smc91x(); @@ -251,6 +255,7 @@ static void __init omap_2430sdp_init(void) omap_board_config_size = ARRAY_SIZE(sdp2430_config); omap_serial_init(); twl4030_mmc_init(mmc); + usb_musb_init(); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c new file mode 100644 index 00000000000..ed927497212 --- /dev/null +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -0,0 +1,542 @@ +/* + * linux/arch/arm/mach-omap2/board-3430sdp.c + * + * Copyright (C) 2007 Texas Instruments + * + * Modified from mach-omap2/board-generic.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/i2c/twl4030.h> +#include <linux/regulator/machine.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/mcspi.h> +#include <mach/mux.h> +#include <mach/board.h> +#include <mach/usb.h> +#include <mach/common.h> +#include <mach/dma.h> +#include <mach/gpmc.h> + +#include <mach/control.h> +#include <mach/keypad.h> + +#include "mmc-twl4030.h" + +#define CONFIG_DISABLE_HFCLK 1 + +#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29 +#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6 +#define SDP3430_SMC91X_CS 3 + +#define SDP3430_TS_GPIO_IRQ_SDPV1 3 +#define SDP3430_TS_GPIO_IRQ_SDPV2 2 + +#define ENABLE_VAUX3_DEDICATED 0x03 +#define ENABLE_VAUX3_DEV_GRP 0x20 + +#define TWL4030_MSECURE_GPIO 22 + +static struct resource sdp3430_smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device sdp3430_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources), + .resource = sdp3430_smc91x_resources, +}; + +static int sdp3430_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(0, 4, KEY_C), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(1, 4, KEY_G), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(2, 4, KEY_3), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P), + KEY(3, 4, KEY_Q), + KEY(4, 0, KEY_R), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_T), + KEY(4, 3, KEY_U), + KEY(4, 4, KEY_D), + KEY(5, 0, KEY_V), + KEY(5, 1, KEY_W), + KEY(5, 2, KEY_L), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_H), + 0 +}; + +static struct twl4030_keypad_data sdp3430_kp_data = { + .rows = 5, + .cols = 6, + .keymap = sdp3430_keymap, + .keymapsize = ARRAY_SIZE(sdp3430_keymap), + .rep = 1, +}; + +static int ts_gpio; /* Needed for ads7846_get_pendown_state */ + +/** + * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq + * + * @return - void. If request gpio fails then Flag KERN_ERR. + */ +static void ads7846_dev_init(void) +{ + if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) { + printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + return; + } + + gpio_direction_input(ts_gpio); + + omap_set_gpio_debounce(ts_gpio, 1); + omap_set_gpio_debounce_time(ts_gpio, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(ts_gpio); +} + +static struct ads7846_platform_data tsc2046_config __initdata = { + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, +}; + + +static struct omap2_mcspi_device_config tsc2046_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info sdp3430_spi_board_info[] __initdata = { + [0] = { + /* + * TSC2046 operates at a max freqency of 2MHz, so + * operate slightly below at 1.5MHz + */ + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &tsc2046_mcspi_config, + .irq = 0, + .platform_data = &tsc2046_config, + }, +}; + +static struct platform_device sdp3430_lcd_device = { + .name = "sdp2430_lcd", + .id = -1, +}; + +static struct regulator_consumer_supply sdp3430_vdac_supply = { + .supply = "vdac", + .dev = &sdp3430_lcd_device.dev, +}; + +static struct regulator_consumer_supply sdp3430_vdvi_supply = { + .supply = "vdvi", + .dev = &sdp3430_lcd_device.dev, +}; + +static struct platform_device *sdp3430_devices[] __initdata = { + &sdp3430_smc91x_device, + &sdp3430_lcd_device, +}; + +static inline void __init sdp3430_init_smc91x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + int eth_gpio = 0; + + eth_cs = SDP3430_SMC91X_CS; + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300; + sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f; + udelay(100); + + if (omap_rev() > OMAP3430_REV_ES1_0) + eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2; + else + eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1; + + sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio); + + if (gpio_request(eth_gpio, "SMC91x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + eth_gpio); + return; + } + gpio_direction_input(eth_gpio); +} + +static void __init omap_3430sdp_init_irq(void) +{ + omap2_init_common_hw(NULL); + omap_init_irq(); + omap_gpio_init(); + sdp3430_init_smc91x(); +} + +static struct omap_uart_config sdp3430_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config sdp3430_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel sdp3430_config[] __initdata = { + { OMAP_TAG_UART, &sdp3430_uart_config }, + { OMAP_TAG_LCD, &sdp3430_lcd_config }, +}; + +static int sdp3430_batt_table[] = { +/* 0 C*/ +30800, 29500, 28300, 27100, +26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, +17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, +11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, +8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, +5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, +4040, 3910, 3790, 3670, 3550 +}; + +static struct twl4030_bci_platform_data sdp3430_bci_data = { + .battery_tmp_tbl = sdp3430_batt_table, + .tblsize = ARRAY_SIZE(sdp3430_batt_table), +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + /* 8 bits (default) requires S6.3 == ON, + * so the SIM card isn't used; else 4 bits. + */ + .wires = 8, + .gpio_wp = 4, + }, + { + .mmc = 2, + .wires = 8, + .gpio_wp = 7, + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply sdp3430_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply sdp3430_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct regulator_consumer_supply sdp3430_vmmc2_supply = { + .supply = "vmmc", +}; + +static int sdp3430_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ), + * gpio + 1 is "mmc1_cd" (input/IRQ) + */ + mmc[0].gpio_cd = gpio + 0; + mmc[1].gpio_cd = gpio + 1; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters ... we "know" the + * regulators will be set up only *after* we return. + */ + sdp3430_vmmc1_supply.dev = mmc[0].dev; + sdp3430_vsim_supply.dev = mmc[0].dev; + sdp3430_vmmc2_supply.dev = mmc[1].dev; + + /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ + gpio_request(gpio + 7, "sub_lcd_en_bkl"); + gpio_direction_output(gpio + 7, 0); + + /* gpio + 15 is "sub_lcd_nRST" (output) */ + gpio_request(gpio + 15, "sub_lcd_nRST"); + gpio_direction_output(gpio + 15, 0); + + return 0; +} + +static struct twl4030_gpio_platform_data sdp3430_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) + | BIT(16) | BIT(17), + .setup = sdp3430_twl_gpio_setup, +}; + +static struct twl4030_usb_data sdp3430_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_madc_platform_data sdp3430_madc_data = { + .irq_line = 1, +}; + +/* + * Apply all the fixed voltages since most versions of U-Boot + * don't bother with that initialization. + */ + +/* VAUX1 for mainboard (irda and sub-lcd) */ +static struct regulator_init_data sdp3430_vaux1 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VAUX2 for camera module */ +static struct regulator_init_data sdp3430_vaux2 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VAUX3 for LCD board */ +static struct regulator_init_data sdp3430_vaux3 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VAUX4 for OMAP VDD_CSI2 (camera) */ +static struct regulator_init_data sdp3430_vaux4 = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data sdp3430_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &sdp3430_vmmc1_supply, +}; + +/* VMMC2 for MMC2 card */ +static struct regulator_init_data sdp3430_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 1850000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &sdp3430_vmmc2_supply, +}; + +/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ +static struct regulator_init_data sdp3430_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &sdp3430_vsim_supply, +}; + +/* VDAC for DSS driving S-Video */ +static struct regulator_init_data sdp3430_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &sdp3430_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data sdp3430_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &sdp3430_vdvi_supply, +}; + +static struct twl4030_platform_data sdp3430_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .bci = &sdp3430_bci_data, + .gpio = &sdp3430_gpio_data, + .madc = &sdp3430_madc_data, + .keypad = &sdp3430_kp_data, + .usb = &sdp3430_usb_data, + + .vaux1 = &sdp3430_vaux1, + .vaux2 = &sdp3430_vaux2, + .vaux3 = &sdp3430_vaux3, + .vaux4 = &sdp3430_vaux4, + .vmmc1 = &sdp3430_vmmc1, + .vmmc2 = &sdp3430_vmmc2, + .vsim = &sdp3430_vsim, + .vdac = &sdp3430_vdac, + .vpll2 = &sdp3430_vpll2, +}; + +static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &sdp3430_twldata, + }, +}; + +static int __init omap3430_i2c_init(void) +{ + /* i2c1 for PMIC only */ + omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo, + ARRAY_SIZE(sdp3430_i2c_boardinfo)); + /* i2c2 on camera connector (for sensor control) and optional isp1301 */ + omap_register_i2c_bus(2, 400, NULL, 0); + /* i2c3 on display connector (for DVI, tfp410) */ + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static void __init omap_3430sdp_init(void) +{ + omap3430_i2c_init(); + platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); + omap_board_config = sdp3430_config; + omap_board_config_size = ARRAY_SIZE(sdp3430_config); + if (omap_rev() > OMAP3430_REV_ES1_0) + ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; + else + ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1; + sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio); + spi_register_board_info(sdp3430_spi_board_info, + ARRAY_SIZE(sdp3430_spi_board_info)); + ads7846_dev_init(); + omap_serial_init(); + usb_musb_init(); +} + +static void __init omap_3430sdp_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_3430sdp_map_io, + .init_irq = omap_3430sdp_init_irq, + .init_machine = omap_3430sdp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 0a7b24ba165..06dfba888b0 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -51,6 +51,7 @@ #define APOLLON_FLASH_CS 0 #define APOLLON_ETH_CS 1 +#define APOLLON_ETHR_GPIO_IRQ 74 static struct mtd_partition apollon_partitions[] = { { @@ -249,7 +250,7 @@ out: static void __init omap_apollon_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); apollon_init_smc91x(); @@ -272,7 +273,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = { static struct omap_board_config_kernel apollon_config[] = { { OMAP_TAG_UART, &apollon_uart_config }, - { OMAP_TAG_USB, &apollon_usb_config }, { OMAP_TAG_LCD, &apollon_lcd_config }, }; @@ -299,6 +299,7 @@ static void __init apollon_usb_init(void) omap_cfg_reg(P21_242X_GPIO12); gpio_request(12, "USB suspend"); gpio_direction_output(12, 0); + omap_usb_init(&apollon_usb_config); } static void __init omap_apollon_init(void) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3b34c20d1df..3492162a65c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init omap_generic_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 5e9b14675b1..a0267a9ab46 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -47,6 +47,8 @@ #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 +#define H4_ETHR_GPIO_IRQ 92 + static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; @@ -341,7 +343,7 @@ static inline void __init h4_init_debug(void) udelay(100); omap_cfg_reg(M15_24XX_GPIO92); - if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0) + if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) gpmc_cs_free(eth_cs); out: @@ -363,7 +365,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); @@ -377,6 +379,39 @@ static struct omap_lcd_config h4_lcd_config __initdata = { .ctrl_name = "internal", }; +static struct omap_usb_config h4_usb_config __initdata = { +#ifdef CONFIG_MACH_OMAP2_H4_USB1 + /* NOTE: usb1 could also be used with 3 wire signaling */ + .pins[1] = 4, +#endif + +#ifdef CONFIG_MACH_OMAP_H4_OTG + /* S1.10 ON -- USB OTG port + * usb0 switched to Mini-AB port and isp1301 transceiver; + * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging + */ + .otg = 1, + .pins[0] = 4, +#ifdef CONFIG_USB_GADGET_OMAP + /* use OTG cable, or standard A-to-MiniB */ + .hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */ +#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* use OTG cable, or NONSTANDARD (B-to-MiniB) */ + .hmc_mode = 0x11, /* 0:host 1:host 2:disable */ +#endif /* XX */ + +#else + /* S1.10 OFF -- usb "download port" + * usb0 switched to Mini-B port and isp1105 transceiver; + * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging + */ + .register_dev = 1, + .pins[0] = 3, +/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */ + .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ +#endif +}; + static struct omap_board_config_kernel h4_config[] = { { OMAP_TAG_UART, &h4_uart_config }, { OMAP_TAG_LCD, &h4_lcd_config }, @@ -428,6 +463,7 @@ static void __init omap_h4_init(void) platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); omap_board_config = h4_config; omap_board_config_size = ARRAY_SIZE(h4_config); + omap_usb_init(&h4_usb_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 6031e179926..e096f776f99 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,31 +22,34 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board-ldp.h> #include <mach/mcspi.h> #include <mach/gpio.h> #include <mach/board.h> #include <mach/common.h> #include <mach/gpmc.h> -#include <asm/io.h> #include <asm/delay.h> #include <mach/control.h> +#include <mach/usb.h> #include "mmc-twl4030.h" -#define SDP3430_SMC91X_CS 3 +#define LDP_SMC911X_CS 1 +#define LDP_SMC911X_GPIO 152 +#define DEBUG_BASE 0x08000000 +#define LDP_ETHR_START DEBUG_BASE static struct resource ldp_smc911x_resources[] = { [0] = { - .start = OMAP34XX_ETHR_START, - .end = OMAP34XX_ETHR_START + SZ_4K, + .start = LDP_ETHR_START, + .end = LDP_ETHR_START + SZ_4K, .flags = IORESOURCE_MEM, }, [1] = { @@ -98,7 +101,7 @@ static inline void __init ldp_init_smc911x(void) static void __init omap_ldp_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); ldp_init_smc911x(); @@ -162,6 +165,7 @@ static void __init omap_ldp_init(void) omap_board_config_size = ARRAY_SIZE(ldp_config); omap_serial_init(); twl4030_mmc_init(mmc); + usb_musb_init(); } static void __init omap_ldp_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index e39cd2c46cf..744740ae1b9 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,6 +41,7 @@ #include <mach/gpmc.h> #include <mach/nand.h> #include <mach/mux.h> +#include <mach/usb.h> #include "mmc-twl4030.h" @@ -175,9 +176,6 @@ static int __init omap3_beagle_i2c_init(void) { omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, ARRAY_SIZE(beagle_i2c_boardinfo)); -#ifdef CONFIG_I2C2_OMAP_BEAGLE - omap_register_i2c_bus(2, 400, NULL, 0); -#endif /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 100, NULL, 0); @@ -186,7 +184,7 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); } @@ -316,6 +314,7 @@ static void __init omap3_beagle_init(void) /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); + usb_musb_init(); omap3beagle_flash_init(); } diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b3196107afd..402f09c6cf1 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -34,6 +34,7 @@ #include <mach/gpio.h> #include <mach/hardware.h> #include <mach/mcspi.h> +#include <mach/usb.h> #include "mmc-twl4030.h" @@ -53,6 +54,13 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = 127, .ext_clock = 1, + .transceiver = true, + }, + { + .mmc = 3, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, }, {} /* Terminator */ }; @@ -110,7 +118,7 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); } @@ -193,6 +201,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); + usb_musb_init(); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 82b3dc557c9..b3f6e9d8180 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -37,20 +37,85 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/board-overo.h> #include <mach/board.h> #include <mach/common.h> #include <mach/gpio.h> #include <mach/gpmc.h> #include <mach/hardware.h> #include <mach/nand.h> +#include <mach/usb.h> #include "mmc-twl4030.h" +#define OVERO_GPIO_BT_XGATE 15 +#define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_BT_NRESET 164 +#define OVERO_GPIO_USBH_CPEN 168 +#define OVERO_GPIO_USBH_NRESET 183 + #define NAND_BLOCK_SIZE SZ_128K #define GPMC_CS0_BASE 0x60 #define GPMC_CS_SIZE 0x30 +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + +#include <mach/mcspi.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(OVERO_GPIO_PENDOWN); +} + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, +}; + +static struct spi_board_info overo_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), + .platform_data = &ads7846_config, + } +}; + +static void __init overo_ads7846_init(void) +{ + if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && + (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) { + gpio_export(OVERO_GPIO_PENDOWN, 0); + } else { + printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); + return; + } + + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); +} + +#else +static inline void __init overo_ads7846_init(void) { return; } +#endif + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -174,7 +239,7 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(); + omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); } @@ -209,6 +274,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { .wires = 4, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .transceiver = true, }, {} /* Terminator */ }; @@ -222,6 +288,8 @@ static void __init overo_init(void) omap_serial_init(); twl4030_mmc_init(mmc); overo_flash_init(); + usb_musb_init(); + overo_ads7846_init(); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c new file mode 100644 index 00000000000..a7381729645 --- /dev/null +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -0,0 +1,419 @@ +/* + * linux/arch/arm/mach-omap2/board-rx51-flash.c + * + * Copyright (C) 2008-2009 Nokia + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/i2c/twl4030.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/gpio.h> + +#include <mach/mcspi.h> +#include <mach/mux.h> +#include <mach/board.h> +#include <mach/common.h> +#include <mach/dma.h> +#include <mach/gpmc.h> +#include <mach/keypad.h> + +#include "mmc-twl4030.h" + + +#define SMC91X_CS 1 +#define SMC91X_GPIO_IRQ 54 +#define SMC91X_GPIO_RESET 164 +#define SMC91X_GPIO_PWRDWN 86 + +static struct resource rx51_smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device rx51_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(rx51_smc91x_resources), + .resource = rx51_smc91x_resources, +}; + +static int rx51_keymap[] = { + KEY(0, 0, KEY_Q), + KEY(0, 1, KEY_W), + KEY(0, 2, KEY_E), + KEY(0, 3, KEY_R), + KEY(0, 4, KEY_T), + KEY(0, 5, KEY_Y), + KEY(0, 6, KEY_U), + KEY(0, 7, KEY_I), + KEY(1, 0, KEY_O), + KEY(1, 1, KEY_D), + KEY(1, 2, KEY_DOT), + KEY(1, 3, KEY_V), + KEY(1, 4, KEY_DOWN), + KEY(2, 0, KEY_P), + KEY(2, 1, KEY_F), + KEY(2, 2, KEY_UP), + KEY(2, 3, KEY_B), + KEY(2, 4, KEY_RIGHT), + KEY(3, 0, KEY_COMMA), + KEY(3, 1, KEY_G), + KEY(3, 2, KEY_ENTER), + KEY(3, 3, KEY_N), + KEY(4, 0, KEY_BACKSPACE), + KEY(4, 1, KEY_H), + KEY(4, 3, KEY_M), + KEY(4, 4, KEY_LEFTCTRL), + KEY(5, 1, KEY_J), + KEY(5, 2, KEY_Z), + KEY(5, 3, KEY_SPACE), + KEY(5, 4, KEY_LEFTSHIFT), + KEY(6, 0, KEY_A), + KEY(6, 1, KEY_K), + KEY(6, 2, KEY_X), + KEY(6, 3, KEY_SPACE), + KEY(6, 4, KEY_FN), + KEY(7, 0, KEY_S), + KEY(7, 1, KEY_L), + KEY(7, 2, KEY_C), + KEY(7, 3, KEY_LEFT), + KEY(0xff, 0, KEY_F6), + KEY(0xff, 1, KEY_F7), + KEY(0xff, 2, KEY_F8), + KEY(0xff, 4, KEY_F9), + KEY(0xff, 5, KEY_F10), +}; + +static struct twl4030_keypad_data rx51_kp_data = { + .rows = 8, + .cols = 8, + .keymap = rx51_keymap, + .keymapsize = ARRAY_SIZE(rx51_keymap), + .rep = 1, +}; + +static struct platform_device *rx51_peripherals_devices[] = { + &rx51_smc91x_device, +}; + +/* + * Timings are taken from smsc-lan91c96-ms.pdf + */ +static int smc91x_init_gpmc(int cs) +{ + struct gpmc_timings t; + const int t2_r = 45; /* t2 in Figure 12.10 */ + const int t2_w = 30; /* t2 in Figure 12.11 */ + const int t3 = 15; /* t3 in Figure 12.10 */ + const int t5_r = 0; /* t5 in Figure 12.10 */ + const int t6_r = 45; /* t6 in Figure 12.10 */ + const int t6_w = 0; /* t6 in Figure 12.11 */ + const int t7_w = 15; /* t7 in Figure 12.11 */ + const int t15 = 12; /* t15 in Figure 12.2 */ + const int t20 = 185; /* t20 in Figure 12.2 */ + + memset(&t, 0, sizeof(t)); + + t.cs_on = t15; + t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */ + t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */ + t.adv_on = t3; /* Figure 12.10 */ + t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */ + t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */ + t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */ + t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */ + t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */ + t.we_on = t.we_off - t7_w; /* Figure 12.11 */ + t.rd_cycle = t20; /* Figure 12.2 */ + t.wr_cycle = t20; /* Figure 12.4 */ + t.access = t3 + t2_r + t5_r; /* Figure 12.10 */ + t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */ + + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16); + + return gpmc_cs_set_timings(cs, &t); +} + +static void __init rx51_init_smc91x(void) +{ + unsigned long cs_mem_base; + int ret; + + omap_cfg_reg(U8_34XX_GPIO54_DOWN); + omap_cfg_reg(G25_34XX_GPIO86_OUT); + omap_cfg_reg(H19_34XX_GPIO164_OUT); + + if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + rx51_smc91x_resources[0].start = cs_mem_base + 0x300; + rx51_smc91x_resources[0].end = cs_mem_base + 0x30f; + + smc91x_init_gpmc(SMC91X_CS); + + if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0) + goto free1; + + gpio_direction_input(SMC91X_GPIO_IRQ); + rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ); + + ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown"); + if (ret) + goto free2; + gpio_direction_output(SMC91X_GPIO_PWRDWN, 0); + + ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset"); + if (ret) + goto free3; + gpio_direction_output(SMC91X_GPIO_RESET, 0); + gpio_set_value(SMC91X_GPIO_RESET, 1); + msleep(100); + gpio_set_value(SMC91X_GPIO_RESET, 0); + + return; + +free3: + gpio_free(SMC91X_GPIO_PWRDWN); +free2: + gpio_free(SMC91X_GPIO_IRQ); +free1: + gpmc_cs_free(SMC91X_CS); + + printk(KERN_ERR "Could not initialize smc91x\n"); +} + +static struct twl4030_madc_platform_data rx51_madc_data = { + .irq_line = 1, +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .name = "external", + .mmc = 1, + .wires = 4, + .cover_only = true, + .gpio_cd = 160, + .gpio_wp = -EINVAL, + }, + { + .name = "internal", + .mmc = 2, + .wires = 8, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply rx51_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply rx51_vmmc2_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply rx51_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct regulator_init_data rx51_vaux1 = { + .constraints = { + .name = "V28", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data rx51_vaux2 = { + .constraints = { + .name = "VCSI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VAUX3 - adds more power to VIO_18 rail */ +static struct regulator_init_data rx51_vaux3 = { + .constraints = { + .name = "VCAM_DIG_18", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data rx51_vaux4 = { + .constraints = { + .name = "VCAM_ANA_28", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data rx51_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &rx51_vmmc1_supply, +}; + +static struct regulator_init_data rx51_vmmc2 = { + .constraints = { + .name = "VMMC2_30", + .min_uV = 1850000, + .max_uV = 3150000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &rx51_vmmc2_supply, +}; + +static struct regulator_init_data rx51_vsim = { + .constraints = { + .name = "VMMC2_IO_18", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &rx51_vsim_supply, +}; + +static struct regulator_init_data rx51_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) +{ + /* FIXME this gpio setup is just a placeholder for now */ + gpio_request(gpio + 6, "backlight_pwm"); + gpio_direction_output(gpio + 6, 0); + gpio_request(gpio + 7, "speaker_en"); + gpio_direction_output(gpio + 7, 1); + + /* set up MMC adapters, linking their regulators to them */ + twl4030_mmc_init(mmc); + rx51_vmmc1_supply.dev = mmc[0].dev; + rx51_vmmc2_supply.dev = mmc[1].dev; + rx51_vsim_supply.dev = mmc[1].dev; + + return 0; +} + +static struct twl4030_gpio_platform_data rx51_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) + | BIT(4) | BIT(5) + | BIT(8) | BIT(9) | BIT(10) | BIT(11) + | BIT(12) | BIT(13) | BIT(14) | BIT(15) + | BIT(16) | BIT(17) , + .setup = rx51_twlgpio_setup, +}; + +static struct twl4030_platform_data rx51_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &rx51_gpio_data, + .keypad = &rx51_kp_data, + .madc = &rx51_madc_data, + + .vaux1 = &rx51_vaux1, + .vaux2 = &rx51_vaux2, + .vaux3 = &rx51_vaux3, + .vaux4 = &rx51_vaux4, + .vmmc1 = &rx51_vmmc1, + .vmmc2 = &rx51_vmmc2, + .vsim = &rx51_vsim, + .vdac = &rx51_vdac, +}; + +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { + { + I2C_BOARD_INFO("twl5030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &rx51_twldata, + }, +}; + +static int __init rx51_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_register_i2c_bus(2, 100, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + + +void __init rx51_peripherals_init(void) +{ + platform_add_devices(rx51_peripherals_devices, + ARRAY_SIZE(rx51_peripherals_devices)); + rx51_i2c_init(); + rx51_init_smc91x(); +} + diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c new file mode 100644 index 00000000000..3a0daac6c83 --- /dev/null +++ b/arch/arm/mach-omap2/board-rx51.c @@ -0,0 +1,96 @@ +/* + * linux/arch/arm/mach-omap2/board-rx51.c + * + * Copyright (C) 2007, 2008 Nokia + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/mcspi.h> +#include <mach/mux.h> +#include <mach/board.h> +#include <mach/common.h> +#include <mach/keypad.h> +#include <mach/dma.h> +#include <mach/gpmc.h> +#include <mach/usb.h> + +static struct omap_uart_config rx51_uart_config = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config rx51_lcd_config = { + .ctrl_name = "internal", +}; + +static struct omap_fbmem_config rx51_fbmem0_config = { + .size = 752 * 1024, +}; + +static struct omap_fbmem_config rx51_fbmem1_config = { + .size = 752 * 1024, +}; + +static struct omap_fbmem_config rx51_fbmem2_config = { + .size = 752 * 1024, +}; + +static struct omap_board_config_kernel rx51_config[] = { + { OMAP_TAG_UART, &rx51_uart_config }, + { OMAP_TAG_FBMEM, &rx51_fbmem0_config }, + { OMAP_TAG_FBMEM, &rx51_fbmem1_config }, + { OMAP_TAG_FBMEM, &rx51_fbmem2_config }, + { OMAP_TAG_LCD, &rx51_lcd_config }, +}; + +static void __init rx51_init_irq(void) +{ + omap2_init_common_hw(NULL); + omap_init_irq(); + omap_gpio_init(); +} + +extern void __init rx51_peripherals_init(void); + +static void __init rx51_init(void) +{ + omap_board_config = rx51_config; + omap_board_config_size = ARRAY_SIZE(rx51_config); + omap_serial_init(); + usb_musb_init(); + rx51_peripherals_init(); +} + +static void __init rx51_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") + /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = rx51_map_io, + .init_irq = rx51_init_irq, + .init_machine = rx51_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index ce4d46a4a83..4247a153441 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -26,11 +26,10 @@ #include <mach/clock.h> #include <mach/clockdomain.h> -#include <mach/sram.h> #include <mach/cpu.h> #include <asm/div64.h> -#include "memory.h" +#include <mach/sdrc.h> #include "sdrc.h" #include "clock.h" #include "prm.h" @@ -46,7 +45,7 @@ #define DPLL_MIN_DIVIDER 1 /* Possible error results from _dpll_test_mult */ -#define DPLL_MULT_UNDERFLOW (1 << 0) +#define DPLL_MULT_UNDERFLOW -1 /* * Scale factor to mitigate roundoff errors in DPLL rate rounding. @@ -59,6 +58,16 @@ #define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) +/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ +#define DPLL_FINT_BAND1_MIN 750000 +#define DPLL_FINT_BAND1_MAX 2100000 +#define DPLL_FINT_BAND2_MIN 7500000 +#define DPLL_FINT_BAND2_MAX 21000000 + +/* _dpll_test_fint() return codes */ +#define DPLL_FINT_UNDERFLOW -1 +#define DPLL_FINT_INVALID -2 + u8 cpu_mask; /*------------------------------------------------------------------------- @@ -66,6 +75,74 @@ u8 cpu_mask; *-------------------------------------------------------------------------*/ /** + * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware + * @clk: struct clk * + * + * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes + * don't take effect until the VALID_CONFIG bit is written, write the + * VALID_CONFIG bit and wait for the write to complete. No return value. + */ +static void _omap2xxx_clk_commit(struct clk *clk) +{ + if (!cpu_is_omap24xx()) + return; + + if (!(clk->flags & DELAYED_APP)) + return; + + prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD, + OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); + /* OCP barrier */ + prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); +} + +/* + * _dpll_test_fint - test whether an Fint value is valid for the DPLL + * @clk: DPLL struct clk to test + * @n: divider value (N) to test + * + * Tests whether a particular divider @n will result in a valid DPLL + * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter + * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate + * (assuming that it is counting N upwards), or -2 if the enclosing loop + * should skip to the next iteration (again assuming N is increasing). + */ +static int _dpll_test_fint(struct clk *clk, u8 n) +{ + struct dpll_data *dd; + long fint; + int ret = 0; + + dd = clk->dpll_data; + + /* DPLL divider must result in a valid jitter correction val */ + fint = clk->parent->rate / (n + 1); + if (fint < DPLL_FINT_BAND1_MIN) { + + pr_debug("rejecting n=%d due to Fint failure, " + "lowering max_divider\n", n); + dd->max_divider = n; + ret = DPLL_FINT_UNDERFLOW; + + } else if (fint > DPLL_FINT_BAND1_MAX && + fint < DPLL_FINT_BAND2_MIN) { + + pr_debug("rejecting n=%d due to Fint failure\n", n); + ret = DPLL_FINT_INVALID; + + } else if (fint > DPLL_FINT_BAND2_MAX) { + + pr_debug("rejecting n=%d due to Fint failure, " + "boosting min_divider\n", n); + dd->min_divider = n; + ret = DPLL_FINT_INVALID; + + } + + return ret; +} + +/** * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk * @clk: OMAP clock struct ptr to use * @@ -120,7 +197,7 @@ void omap2_init_clksel_parent(struct clk *clk) clk->name, clks->parent->name, ((clk->parent) ? clk->parent->name : "NULL")); - clk->parent = clks->parent; + clk_reparent(clk, clks->parent); }; found = 1; } @@ -134,25 +211,52 @@ void omap2_init_clksel_parent(struct clk *clk) return; } -/* Returns the DPLL rate */ +/** + * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate + * @clk: struct clk * of a DPLL + * + * DPLLs can be locked or bypassed - basically, enabled or disabled. + * When locked, the DPLL output depends on the M and N values. When + * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock + * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and + * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively + * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk. + * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is + * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0 + * if the clock @clk is not a DPLL. + */ u32 omap2_get_dpll_rate(struct clk *clk) { long long dpll_clk; - u32 dpll_mult, dpll_div, dpll; + u32 dpll_mult, dpll_div, v; struct dpll_data *dd; dd = clk->dpll_data; - /* REVISIT: What do we return on error? */ if (!dd) return 0; - dpll = __raw_readl(dd->mult_div1_reg); - dpll_mult = dpll & dd->mult_mask; + /* Return bypass rate if DPLL is bypassed */ + v = __raw_readl(dd->control_reg); + v &= dd->enable_mask; + v >>= __ffs(dd->enable_mask); + + if (cpu_is_omap24xx()) { + if (v == OMAP2XXX_EN_DPLL_LPBYPASS || + v == OMAP2XXX_EN_DPLL_FRBYPASS) + return dd->clk_bypass->rate; + } else if (cpu_is_omap34xx()) { + if (v == OMAP3XXX_EN_DPLL_LPBYPASS || + v == OMAP3XXX_EN_DPLL_FRBYPASS) + return dd->clk_bypass->rate; + } + + v = __raw_readl(dd->mult_div1_reg); + dpll_mult = v & dd->mult_mask; dpll_mult >>= __ffs(dd->mult_mask); - dpll_div = dpll & dd->div1_mask; + dpll_div = v & dd->div1_mask; dpll_div >>= __ffs(dd->div1_mask); - dpll_clk = (long long)clk->parent->rate * dpll_mult; + dpll_clk = (long long)dd->clk_ref->rate * dpll_mult; do_div(dpll_clk, dpll_div + 1); return dpll_clk; @@ -162,14 +266,11 @@ u32 omap2_get_dpll_rate(struct clk *clk) * Used for clocks that have the same value as the parent clock, * divided by some factor */ -void omap2_fixed_divisor_recalc(struct clk *clk) +unsigned long omap2_fixed_divisor_recalc(struct clk *clk) { WARN_ON(!clk->fixed_div); - clk->rate = clk->parent->rate / clk->fixed_div; - - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); + return clk->parent->rate / clk->fixed_div; } /** @@ -190,11 +291,10 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) * 24xx uses 0 to indicate not ready, and 1 to indicate ready. * 34xx reverses this, just to keep us on our toes */ - if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) { + if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) ena = mask; - } else if (cpu_mask & RATE_IN_343X) { + else if (cpu_mask & RATE_IN_343X) ena = 0; - } /* Wait for lock */ while (((__raw_readl(reg) & mask) != ena) && @@ -228,31 +328,12 @@ static void omap2_clk_wait_ready(struct clk *clk) * it and pull it into struct clk itself somehow. */ reg = clk->enable_reg; - if ((((u32)reg & 0xff) >= CM_FCLKEN1) && - (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2)) - other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */ - else if ((((u32)reg & 0xff) >= CM_ICLKEN1) && - (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4)) - other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */ - else - return; - /* REVISIT: What are the appropriate exclusions for 34XX? */ - /* No check for DSS or cam clocks */ - if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */ - if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT || - clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT || - clk->enable_bit == OMAP24XX_EN_CAM_SHIFT) - return; - } - - /* REVISIT: What are the appropriate exclusions for 34XX? */ - /* OMAP3: ignore DSS-mod clocks */ - if (cpu_is_omap34xx() && - (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) || - ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) && - clk->enable_bit == OMAP3430_EN_SSI_SHIFT))) - return; + /* + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes + * it's just a matter of XORing the bits. + */ + other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN)); /* Check if both functional and interface clocks * are running. */ @@ -264,18 +345,9 @@ static void omap2_clk_wait_ready(struct clk *clk) omap2_wait_clock_ready(st_reg, bit, clk->name); } -/* Enables clock without considering parent dependencies or use count - * REVISIT: Maybe change this to use clk->enable like on omap1? - */ -int _omap2_clk_enable(struct clk *clk) +static int omap2_dflt_clk_enable(struct clk *clk) { - u32 regval32; - - if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) - return 0; - - if (clk->enable) - return clk->enable(clk); + u32 v; if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", @@ -283,33 +355,38 @@ int _omap2_clk_enable(struct clk *clk) return 0; /* REVISIT: -EINVAL */ } - regval32 = __raw_readl(clk->enable_reg); + v = __raw_readl(clk->enable_reg); if (clk->flags & INVERT_ENABLE) - regval32 &= ~(1 << clk->enable_bit); + v &= ~(1 << clk->enable_bit); else - regval32 |= (1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - wmb(); - - omap2_clk_wait_ready(clk); + v |= (1 << clk->enable_bit); + __raw_writel(v, clk->enable_reg); + v = __raw_readl(clk->enable_reg); /* OCP barrier */ return 0; } -/* Disables clock without considering parent dependencies or use count */ -void _omap2_clk_disable(struct clk *clk) +static int omap2_dflt_clk_enable_wait(struct clk *clk) { - u32 regval32; - - if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK)) - return; + int ret; - if (clk->disable) { - clk->disable(clk); - return; + if (!clk->enable_reg) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; /* REVISIT: -EINVAL */ } - if (clk->enable_reg == NULL) { + ret = omap2_dflt_clk_enable(clk); + if (ret == 0) + omap2_clk_wait_ready(clk); + return ret; +} + +static void omap2_dflt_clk_disable(struct clk *clk) +{ + u32 v; + + if (!clk->enable_reg) { /* * 'Independent' here refers to a clock which is not * controlled by its parent. @@ -319,20 +396,44 @@ void _omap2_clk_disable(struct clk *clk) return; } - regval32 = __raw_readl(clk->enable_reg); + v = __raw_readl(clk->enable_reg); if (clk->flags & INVERT_ENABLE) - regval32 |= (1 << clk->enable_bit); + v |= (1 << clk->enable_bit); else - regval32 &= ~(1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - wmb(); + v &= ~(1 << clk->enable_bit); + __raw_writel(v, clk->enable_reg); + /* No OCP barrier needed here since it is a disable operation */ +} + +const struct clkops clkops_omap2_dflt_wait = { + .enable = omap2_dflt_clk_enable_wait, + .disable = omap2_dflt_clk_disable, +}; + +const struct clkops clkops_omap2_dflt = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, +}; + +/* Enables clock without considering parent dependencies or use count + * REVISIT: Maybe change this to use clk->enable like on omap1? + */ +static int _omap2_clk_enable(struct clk *clk) +{ + return clk->ops->enable(clk); +} + +/* Disables clock without considering parent dependencies or use count */ +static void _omap2_clk_disable(struct clk *clk) +{ + clk->ops->disable(clk); } void omap2_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { _omap2_clk_disable(clk); - if (likely((u32)clk->parent)) + if (clk->parent) omap2_clk_disable(clk->parent); if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); @@ -345,30 +446,29 @@ int omap2_clk_enable(struct clk *clk) int ret = 0; if (clk->usecount++ == 0) { - if (likely((u32)clk->parent)) - ret = omap2_clk_enable(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } - if (clk->clkdm) omap2_clkdm_clk_enable(clk->clkdm, clk); - ret = _omap2_clk_enable(clk); - - if (unlikely(ret != 0)) { - if (clk->clkdm) - omap2_clkdm_clk_disable(clk->clkdm, clk); + if (clk->parent) { + ret = omap2_clk_enable(clk->parent); + if (ret) + goto err; + } - if (clk->parent) { + ret = _omap2_clk_enable(clk); + if (ret) { + if (clk->parent) omap2_clk_disable(clk->parent); - clk->usecount--; - } + + goto err; } } + return ret; +err: + if (clk->clkdm) + omap2_clkdm_clk_disable(clk->clkdm, clk); + clk->usecount--; return ret; } @@ -376,24 +476,22 @@ int omap2_clk_enable(struct clk *clk) * Used for clocks that are part of CLKSEL_xyz governed clocks. * REVISIT: Maybe change to use clk->enable() functions like on omap1? */ -void omap2_clksel_recalc(struct clk *clk) +unsigned long omap2_clksel_recalc(struct clk *clk) { + unsigned long rate; u32 div = 0; pr_debug("clock: recalc'ing clksel clk %s\n", clk->name); div = omap2_clksel_get_divisor(clk); if (div == 0) - return; + return clk->rate; - if (unlikely(clk->rate == clk->parent->rate / div)) - return; - clk->rate = clk->parent->rate / div; + rate = clk->parent->rate / div; - pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div); + pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div); - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + return rate; } /** @@ -405,8 +503,8 @@ void omap2_clksel_recalc(struct clk *clk) * the element associated with the supplied parent clock address. * Returns a pointer to the struct clksel on success or NULL on error. */ -const struct clksel *omap2_get_clksel_by_parent(struct clk *clk, - struct clk *src_clk) +static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk, + struct clk *src_clk) { const struct clksel *clks; @@ -455,7 +553,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, *new_div = 1; clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (clks == NULL) + if (!clks) return ~0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -514,7 +612,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) /* Given a clock and a rate apply a clock specific rounding function */ long omap2_clk_round_rate(struct clk *clk, unsigned long rate) { - if (clk->round_rate != NULL) + if (clk->round_rate) return clk->round_rate(clk, rate); if (clk->flags & RATE_FIXED) @@ -540,7 +638,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val) const struct clksel_rate *clkr; clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (clks == NULL) + if (!clks) return 0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -576,7 +674,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) WARN_ON(div == 0); clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (clks == NULL) + if (!clks) return ~0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -595,23 +693,6 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) } /** - * omap2_get_clksel - find clksel register addr & field mask for a clk - * @clk: struct clk to use - * @field_mask: ptr to u32 to store the register field mask - * - * Returns the address of the clksel register upon success or NULL on error. - */ -void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) -{ - if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL))) - return NULL; - - *field_mask = clk->clksel_mask; - - return clk->clksel_reg; -} - -/** * omap2_clksel_get_divisor - get current divider applied to parent clock. * @clk: OMAP struct clk to use. * @@ -619,49 +700,41 @@ void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) */ u32 omap2_clksel_get_divisor(struct clk *clk) { - u32 field_mask, field_val; - void __iomem *div_addr; + u32 v; - div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == NULL) + if (!clk->clksel_mask) return 0; - field_val = __raw_readl(div_addr) & field_mask; - field_val >>= __ffs(field_mask); + v = __raw_readl(clk->clksel_reg) & clk->clksel_mask; + v >>= __ffs(clk->clksel_mask); - return omap2_clksel_to_divisor(clk, field_val); + return omap2_clksel_to_divisor(clk, v); } int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) { - u32 field_mask, field_val, reg_val, validrate, new_div = 0; - void __iomem *div_addr; + u32 v, field_val, validrate, new_div = 0; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); - if (validrate != rate) + if (!clk->clksel_mask) return -EINVAL; - div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == NULL) + validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); + if (validrate != rate) return -EINVAL; field_val = omap2_divisor_to_clksel(clk, new_div); if (field_val == ~0) return -EINVAL; - reg_val = __raw_readl(div_addr); - reg_val &= ~field_mask; - reg_val |= (field_val << __ffs(field_mask)); - __raw_writel(reg_val, div_addr); - wmb(); + v = __raw_readl(clk->clksel_reg); + v &= ~clk->clksel_mask; + v |= field_val << __ffs(clk->clksel_mask); + __raw_writel(v, clk->clksel_reg); + v = __raw_readl(clk->clksel_reg); /* OCP barrier */ clk->rate = clk->parent->rate / new_div; - if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { - prm_write_mod_reg(OMAP24XX_VALID_CONFIG, - OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET); - wmb(); - } + _omap2xxx_clk_commit(clk); return 0; } @@ -680,31 +753,24 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */ - if (clk->set_rate != NULL) + if (clk->set_rate) ret = clk->set_rate(clk, rate); - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); - return ret; } /* * Converts encoded control register address into a full address - * On error, *src_addr will be returned as 0. + * On error, the return value (parent_div) will be 0. */ -static u32 omap2_clksel_get_src_field(void __iomem **src_addr, - struct clk *src_clk, u32 *field_mask, - struct clk *clk, u32 *parent_div) +static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk, + u32 *field_val) { const struct clksel *clks; const struct clksel_rate *clkr; - *parent_div = 0; - *src_addr = NULL; - clks = omap2_get_clksel_by_parent(clk, src_clk); - if (clks == NULL) + if (!clks) return 0; for (clkr = clks->rates; clkr->div; clkr++) { @@ -722,47 +788,35 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr, /* Should never happen. Add a clksel mask to the struct clk. */ WARN_ON(clk->clksel_mask == 0); - *field_mask = clk->clksel_mask; - *src_addr = clk->clksel_reg; - *parent_div = clkr->div; + *field_val = clkr->val; - return clkr->val; + return clkr->div; } int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) { - void __iomem *src_addr; - u32 field_val, field_mask, reg_val, parent_div; + u32 field_val, v, parent_div; - if (unlikely(clk->flags & CONFIG_PARTICIPANT)) + if (clk->flags & CONFIG_PARTICIPANT) return -EINVAL; if (!clk->clksel) return -EINVAL; - field_val = omap2_clksel_get_src_field(&src_addr, new_parent, - &field_mask, clk, &parent_div); - if (src_addr == NULL) + parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val); + if (!parent_div) return -EINVAL; - if (clk->usecount > 0) - omap2_clk_disable(clk); - /* Set new source value (previous dividers if any in effect) */ - reg_val = __raw_readl(src_addr) & ~field_mask; - reg_val |= (field_val << __ffs(field_mask)); - __raw_writel(reg_val, src_addr); - wmb(); - - if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) { - __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL); - wmb(); - } + v = __raw_readl(clk->clksel_reg); + v &= ~clk->clksel_mask; + v |= field_val << __ffs(clk->clksel_mask); + __raw_writel(v, clk->clksel_reg); + v = __raw_readl(clk->clksel_reg); /* OCP barrier */ - clk->parent = new_parent; + _omap2xxx_clk_commit(clk); - if (clk->usecount > 0) - omap2_clk_enable(clk); + clk_reparent(clk, new_parent); /* CLKSEL clocks follow their parents' rates, divided by a divisor */ clk->rate = new_parent->rate; @@ -773,9 +827,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) pr_debug("clock: set parent of %s to %s (new rate %ld)\n", clk->name, clk->parent->name, clk->rate); - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); - return 0; } @@ -805,7 +856,8 @@ int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance) return 0; } -static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n) +static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, + unsigned int m, unsigned int n) { unsigned long long num; @@ -838,7 +890,7 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, unsigned long target_rate, unsigned long parent_rate) { - int flags = 0, carry = 0; + int r = 0, carry = 0; /* Unscale m and round if necessary */ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL) @@ -859,13 +911,13 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, if (*m < DPLL_MIN_MULTIPLIER) { *m = DPLL_MIN_MULTIPLIER; *new_rate = 0; - flags = DPLL_MULT_UNDERFLOW; + r = DPLL_MULT_UNDERFLOW; } if (*new_rate == 0) *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - return flags; + return r; } /** @@ -889,54 +941,65 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) int m, n, r, e, scaled_max_m; unsigned long scaled_rt_rp, new_rate; int min_e = -1, min_e_m = -1, min_e_n = -1; + struct dpll_data *dd; if (!clk || !clk->dpll_data) return ~0; + dd = clk->dpll_data; + pr_debug("clock: starting DPLL round_rate for clock %s, target rate " "%ld\n", clk->name, target_rate); - scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR); - scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR; + scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR); + scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR; - clk->dpll_data->last_rounded_rate = 0; + dd->last_rounded_rate = 0; - for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) { + for (n = dd->min_divider; n <= dd->max_divider; n++) { + + /* Is the (input clk, divider) pair valid for the DPLL? */ + r = _dpll_test_fint(clk, n); + if (r == DPLL_FINT_UNDERFLOW) + break; + else if (r == DPLL_FINT_INVALID) + continue; /* Compute the scaled DPLL multiplier, based on the divider */ m = scaled_rt_rp * n; /* - * Since we're counting n down, a m overflow means we can - * can immediately skip to the next n + * Since we're counting n up, a m overflow means we + * can bail out completely (since as n increases in + * the next iteration, there's no way that m can + * increase beyond the current m) */ if (m > scaled_max_m) - continue; + break; r = _dpll_test_mult(&m, n, &new_rate, target_rate, - clk->parent->rate); + dd->clk_ref->rate); + + /* m can't be set low enough for this n - try with a larger n */ + if (r == DPLL_MULT_UNDERFLOW) + continue; e = target_rate - new_rate; pr_debug("clock: n = %d: m = %d: rate error is %d " "(new_rate = %ld)\n", n, m, e, new_rate); if (min_e == -1 || - min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) { + min_e >= (int)(abs(e) - dd->rate_tolerance)) { min_e = e; min_e_m = m; min_e_n = n; pr_debug("clock: found new least error %d\n", min_e); - } - /* - * Since we're counting n down, a m underflow means we - * can bail out completely (since as n decreases in - * the next iteration, there's no way that m can - * increase beyond the current m) - */ - if (r & DPLL_MULT_UNDERFLOW) - break; + /* We found good settings -- bail out now */ + if (min_e <= dd->rate_tolerance) + break; + } } if (min_e < 0) { @@ -944,17 +1007,17 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) return ~0; } - clk->dpll_data->last_rounded_m = min_e_m; - clk->dpll_data->last_rounded_n = min_e_n; - clk->dpll_data->last_rounded_rate = - _dpll_compute_new_rate(clk->parent->rate, min_e_m, min_e_n); + dd->last_rounded_m = min_e_m; + dd->last_rounded_n = min_e_n; + dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate, + min_e_m, min_e_n); pr_debug("clock: final least error: e = %d, m = %d, n = %d\n", min_e, min_e_m, min_e_n); pr_debug("clock: final rate: %ld (target rate: %ld)\n", - clk->dpll_data->last_rounded_rate, target_rate); + dd->last_rounded_rate, target_rate); - return clk->dpll_data->last_rounded_rate; + return dd->last_rounded_rate; } /*------------------------------------------------------------------------- @@ -973,6 +1036,10 @@ void omap2_clk_disable_unused(struct clk *clk) return; printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); - _omap2_clk_disable(clk); + if (cpu_is_omap34xx()) { + omap2_clk_enable(clk); + omap2_clk_disable(clk); + } else + _omap2_clk_disable(clk); } #endif diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 1fb330e0847..2679ddfa642 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -21,13 +21,28 @@ /* The maximum error between a target DPLL rate and the rounded rate in Hz */ #define DEFAULT_DPLL_RATE_TOLERANCE 50000 +/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ +#define CORE_CLK_SRC_32K 0x0 +#define CORE_CLK_SRC_DPLL 0x1 +#define CORE_CLK_SRC_DPLL_X2 0x2 + +/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */ +#define OMAP2XXX_EN_DPLL_LPBYPASS 0x1 +#define OMAP2XXX_EN_DPLL_FRBYPASS 0x2 +#define OMAP2XXX_EN_DPLL_LOCKED 0x3 + +/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */ +#define OMAP3XXX_EN_DPLL_LPBYPASS 0x5 +#define OMAP3XXX_EN_DPLL_FRBYPASS 0x6 +#define OMAP3XXX_EN_DPLL_LOCKED 0x7 + int omap2_clk_init(void); int omap2_clk_enable(struct clk *clk); void omap2_clk_disable(struct clk *clk); long omap2_clk_round_rate(struct clk *clk, unsigned long rate); int omap2_clk_set_rate(struct clk *clk, unsigned long rate); int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent); -int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance); +int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance); long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate); #ifdef CONFIG_OMAP_RESET_CLOCKS @@ -36,7 +51,7 @@ void omap2_clk_disable_unused(struct clk *clk); #define omap2_clk_disable_unused NULL #endif -void omap2_clksel_recalc(struct clk *clk); +unsigned long omap2_clksel_recalc(struct clk *clk); void omap2_init_clk_clkdm(struct clk *clk); void omap2_init_clksel_parent(struct clk *clk); u32 omap2_clksel_get_divisor(struct clk *clk); @@ -44,13 +59,16 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, u32 *new_div); u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val); u32 omap2_divisor_to_clksel(struct clk *clk, u32 div); -void omap2_fixed_divisor_recalc(struct clk *clk); +unsigned long omap2_fixed_divisor_recalc(struct clk *clk); long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate); int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); +extern const struct clkops clkops_omap2_dflt_wait; +extern const struct clkops clkops_omap2_dflt; + extern u8 cpu_mask; /* clksel_rate data common to 24xx/343x */ diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index d382eb0184a..1e839c5a28c 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -31,15 +31,192 @@ #include <mach/clock.h> #include <mach/sram.h> #include <asm/div64.h> +#include <asm/clkdev.h> -#include "memory.h" +#include <mach/sdrc.h> #include "clock.h" -#include "clock24xx.h" #include "prm.h" #include "prm-regbits-24xx.h" #include "cm.h" #include "cm-regbits-24xx.h" +static const struct clkops clkops_oscck; +static const struct clkops clkops_fixed; + +#include "clock24xx.h" + +struct omap_clk { + u32 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +#define CK_243X (1 << 0) +#define CK_242X (1 << 1) + +static struct omap_clk omap24xx_clks[] = { + /* external root sources */ + CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), + CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), + /* internal analog sources */ + CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), + CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), + CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), + /* internal prcm root sources */ + CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), + CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), + CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), + CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), + CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), + CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), + CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), + CLK(NULL, "emul_ck", &emul_ck, CK_242X), + /* mpu domain clocks */ + CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), + /* dsp domain clocks */ + CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), + CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), + CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), + CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + /* GFX domain clocks */ + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), + /* Modem domain clocks */ + CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + /* DSS domain clocks */ + CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X), + CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X), + /* L3 domain clocks */ + CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), + /* L4 domain clocks */ + CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), + /* virtual meta-group clock */ + CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), + /* general l4 interface ck, multi-parent functional clk */ + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), + CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), + CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), + CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), + CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), + CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), + CLK(NULL, "icr_ick", &icr_ick, CK_243X), + CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), + CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), + CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), + CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), + CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), + CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), + CLK(NULL, "eac_ick", &eac_ick, CK_242X), + CLK(NULL, "eac_fck", &eac_fck, CK_242X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), + CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), + CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), + CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), + CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), + CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), + CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), + CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), + CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), + CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), + CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), + CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), + CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), + CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), +}; + /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ #define EN_APLL_STOPPED 0 #define EN_APLL_LOCKED 3 @@ -59,19 +236,32 @@ static struct clk *sclk; * Omap24xx specific clock functions *-------------------------------------------------------------------------*/ -/* This actually returns the rate of core_ck, not dpll_ck. */ -static u32 omap2_get_dpll_rate_24xx(struct clk *tclk) +/** + * omap2xxx_clk_get_core_rate - return the CORE_CLK rate + * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") + * + * Returns the CORE_CLK rate. CORE_CLK can have one of three rate + * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz + * (the latter is unusual). This currently should be called with + * struct clk *dpll_ck, which is a composite clock of dpll_ck and + * core_ck. + */ +static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) { - long long dpll_clk; - u8 amult; + long long core_clk; + u32 v; + + core_clk = omap2_get_dpll_rate(clk); - dpll_clk = omap2_get_dpll_rate(tclk); + v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + v &= OMAP24XX_CORE_CLK_SRC_MASK; - amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - amult &= OMAP24XX_CORE_CLK_SRC_MASK; - dpll_clk *= amult; + if (v == CORE_CLK_SRC_32K) + core_clk = 32768; + else + core_clk *= v; - return dpll_clk; + return core_clk; } static int omap2_enable_osc_ck(struct clk *clk) @@ -96,6 +286,11 @@ static void omap2_disable_osc_ck(struct clk *clk) OMAP24XX_PRCM_CLKSRC_CTRL); } +static const struct clkops clkops_oscck = { + .enable = &omap2_enable_osc_ck, + .disable = &omap2_disable_osc_ck, +}; + #ifdef OLD_CK /* Recalculate SYST_CLK */ static void omap2_sys_clk_recalc(struct clk * clk) @@ -149,11 +344,16 @@ static void omap2_clk_fixed_disable(struct clk *clk) cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); } +static const struct clkops clkops_fixed = { + .enable = &omap2_clk_fixed_enable, + .disable = &omap2_clk_fixed_disable, +}; + /* * Uses the current prcm set to tell if a rate is valid. * You can go slower, but not faster within a given rate set. */ -long omap2_dpllcore_round_rate(unsigned long target_rate) +static long omap2_dpllcore_round_rate(unsigned long target_rate) { u32 high, low, core_clk_src; @@ -182,11 +382,9 @@ long omap2_dpllcore_round_rate(unsigned long target_rate) } -static void omap2_dpllcore_recalc(struct clk *clk) +static unsigned long omap2_dpllcore_recalc(struct clk *clk) { - clk->rate = omap2_get_dpll_rate_24xx(clk); - - propagate_rate(clk); + return omap2xxx_clk_get_core_rate(clk); } static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) @@ -195,22 +393,19 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) u32 bypass = 0; struct prcm_config tmpset; const struct dpll_data *dd; - unsigned long flags; - int ret = -EINVAL; - local_irq_save(flags); - cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck); + cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); mult &= OMAP24XX_CORE_CLK_SRC_MASK; if ((rate == (cur_rate / 2)) && (mult == 2)) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); } else if ((rate == (cur_rate * 2)) && (mult == 1)) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); } else if (rate != cur_rate) { valid_rate = omap2_dpllcore_round_rate(rate); if (valid_rate != rate) - goto dpll_exit; + return -EINVAL; if (mult == 1) low = curr_prcm_set->dpll_speed; @@ -219,7 +414,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) dd = clk->dpll_data; if (!dd) - goto dpll_exit; + return -EINVAL; tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); tmpset.cm_clksel1_pll &= ~(dd->mult_mask | @@ -245,22 +440,19 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ bypass = 1; - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */ + /* For omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); /* Force dll lock mode */ omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, bypass); /* Errata: ret dll entry state */ - omap2_init_memory_params(omap2_dll_force_needed()); - omap2_reprogram_sdrc(done_rate, 0); + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); } - omap2_dpllcore_recalc(&dpll_ck); - ret = 0; -dpll_exit: - local_irq_restore(flags); - return(ret); + return 0; } /** @@ -269,9 +461,9 @@ dpll_exit: * * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. */ -static void omap2_table_mpu_recalc(struct clk *clk) +static unsigned long omap2_table_mpu_recalc(struct clk *clk) { - clk->rate = curr_prcm_set->mpu_speed; + return curr_prcm_set->mpu_speed; } /* @@ -337,12 +529,12 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) } curr_prcm_set = prcm; - cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck); + cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); if (prcm->dpll_speed == cur_rate / 2) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); } else if (prcm->dpll_speed == cur_rate * 2) { - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); } else if (prcm->dpll_speed != cur_rate) { local_irq_save(flags); @@ -366,27 +558,67 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) /* Major subsystem dividers */ tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1); + cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, + CM_CLKSEL1); + if (cpu_is_omap2430()) cm_write_mod_reg(prcm->cm_clksel_mdm, OMAP2430_MDM_MOD, CM_CLKSEL); - /* x2 to enter init_mem */ - omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); + /* x2 to enter omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, bypass); - omap2_init_memory_params(omap2_dll_force_needed()); - omap2_reprogram_sdrc(done_rate, 0); + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); local_irq_restore(flags); } - omap2_dpllcore_recalc(&dpll_ck); return 0; } +#ifdef CONFIG_CPU_FREQ +/* + * Walk PRCM rate table and fillout cpufreq freq_table + */ +static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; + +void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) +{ + struct prcm_config *prcm; + int i = 0; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + freq_table[i].index = i; + freq_table[i].frequency = prcm->mpu_speed / 1000; + i++; + } + + if (i == 0) { + printk(KERN_WARNING "%s: failed to initialize frequency " + "table\n", __func__); + return; + } + + freq_table[i].index = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; +} +#endif + static struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, @@ -394,24 +626,27 @@ static struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, +#ifdef CONFIG_CPU_FREQ + .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, +#endif }; static u32 omap2_get_apll_clkin(void) { - u32 aplls, sclk = 0; + u32 aplls, srate = 0; aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); aplls &= OMAP24XX_APLLS_CLKIN_MASK; aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; if (aplls == APLLS_CLKIN_19_2MHZ) - sclk = 19200000; + srate = 19200000; else if (aplls == APLLS_CLKIN_13MHZ) - sclk = 13000000; + srate = 13000000; else if (aplls == APLLS_CLKIN_12MHZ) - sclk = 12000000; + srate = 12000000; - return sclk; + return srate; } static u32 omap2_get_sysclkdiv(void) @@ -425,16 +660,14 @@ static u32 omap2_get_sysclkdiv(void) return div; } -static void omap2_osc_clk_recalc(struct clk *clk) +static unsigned long omap2_osc_clk_recalc(struct clk *clk) { - clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv(); - propagate_rate(clk); + return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); } -static void omap2_sys_clk_recalc(struct clk *clk) +static unsigned long omap2_sys_clk_recalc(struct clk *clk) { - clk->rate = clk->parent->rate / omap2_get_sysclkdiv(); - propagate_rate(clk); + return clk->parent->rate / omap2_get_sysclkdiv(); } /* @@ -460,7 +693,7 @@ static int __init omap2_clk_arch_init(void) if (!mpurate) return -EINVAL; - if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + if (clk_set_rate(&virt_prcm_set, mpurate)) printk(KERN_ERR "Could not find matching MPU rate\n"); recalculate_root_clocks(); @@ -477,8 +710,8 @@ arch_initcall(omap2_clk_arch_init); int __init omap2_clk_init(void) { struct prcm_config *prcm; - struct clk **clkp; - u32 clkrate; + struct omap_clk *c; + u32 clkrate, cpu_mask; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -487,26 +720,28 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); - omap2_osc_clk_recalc(&osc_ck); - omap2_sys_clk_recalc(&sys_ck); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); + propagate_rate(&osc_ck); + sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); + propagate_rate(&sys_ck); - for (clkp = onchip_24xx_clks; - clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks); - clkp++) { + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); - if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { - clk_register(*clkp); - continue; - } + cpu_mask = 0; + if (cpu_is_omap2420()) + cpu_mask |= CK_242X; + if (cpu_is_omap2430()) + cpu_mask |= CK_243X; - if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) { - clk_register(*clkp); - continue; + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); } - } /* Check the MPU rate set by bootloader */ - clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); + clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index ad6d98d177c..33c3e5b1432 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -24,17 +24,13 @@ #include "cm-regbits-24xx.h" #include "sdrc.h" -static void omap2_table_mpu_recalc(struct clk *clk); +static unsigned long omap2_table_mpu_recalc(struct clk *clk); static int omap2_select_table_rate(struct clk *clk, unsigned long rate); static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); -static void omap2_sys_clk_recalc(struct clk *clk); -static void omap2_osc_clk_recalc(struct clk *clk); -static void omap2_sys_clk_recalc(struct clk *clk); -static void omap2_dpllcore_recalc(struct clk *clk); -static int omap2_clk_fixed_enable(struct clk *clk); -static void omap2_clk_fixed_disable(struct clk *clk); -static int omap2_enable_osc_ck(struct clk *clk); -static void omap2_disable_osc_ck(struct clk *clk); +static unsigned long omap2_sys_clk_recalc(struct clk *clk); +static unsigned long omap2_osc_clk_recalc(struct clk *clk); +static unsigned long omap2_sys_clk_recalc(struct clk *clk); +static unsigned long omap2_dpllcore_recalc(struct clk *clk); static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. @@ -623,41 +619,35 @@ static struct prcm_config rate_table[] = { /* Base external input clocks */ static struct clk func_32k_ck = { .name = "func_32k_ck", + .ops = &clkops_null, .rate = 32000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .flags = RATE_FIXED, .clkdm_name = "wkup_clkdm", - .recalc = &propagate_rate, }; /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, + .ops = &clkops_oscck, .clkdm_name = "wkup_clkdm", - .enable = &omap2_enable_osc_ck, - .disable = &omap2_disable_osc_ck, .recalc = &omap2_osc_clk_recalc, }; /* Without modem likely 12MHz, with modem likely 13MHz */ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ .name = "sys_ck", /* ~ ref_clk also */ + .ops = &clkops_null, .parent = &osc_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &omap2_sys_clk_recalc, }; static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .name = "alt_ck", + .ops = &clkops_null, .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .flags = RATE_FIXED, .clkdm_name = "wkup_clkdm", - .recalc = &propagate_rate, }; /* @@ -673,7 +663,12 @@ static struct dpll_data dpll_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .mult_mask = OMAP24XX_DPLL_MULT_MASK, .div1_mask = OMAP24XX_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP24XX_EN_DPLL_MASK, .max_multiplier = 1024, + .min_divider = 1, .max_divider = 16, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; @@ -684,10 +679,9 @@ static struct dpll_data dpll_dd = { */ static struct clk dpll_ck = { .name = "dpll_ck", + .ops = &clkops_null, .parent = &sys_ck, /* Can be func_32k also */ .dpll_data = &dpll_dd, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, .set_rate = &omap2_reprogram_dpllcore, @@ -695,30 +689,24 @@ static struct clk dpll_ck = { static struct clk apll96_ck = { .name = "apll96_ck", + .ops = &clkops_fixed, .parent = &sys_ck, .rate = 96000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .flags = RATE_FIXED | ENABLE_ON_INIT, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, - .enable = &omap2_clk_fixed_enable, - .disable = &omap2_clk_fixed_disable, - .recalc = &propagate_rate, }; static struct clk apll54_ck = { .name = "apll54_ck", + .ops = &clkops_fixed, .parent = &sys_ck, .rate = 54000000, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .flags = RATE_FIXED | ENABLE_ON_INIT, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, - .enable = &omap2_clk_fixed_enable, - .disable = &omap2_clk_fixed_disable, - .recalc = &propagate_rate, }; /* @@ -745,9 +733,8 @@ static const struct clksel func_54m_clksel[] = { static struct clk func_54m_ck = { .name = "func_54m_ck", + .ops = &clkops_null, .parent = &apll54_ck, /* can also be alt_clk */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -758,9 +745,8 @@ static struct clk func_54m_ck = { static struct clk core_ck = { .name = "core_ck", + .ops = &clkops_null, .parent = &dpll_ck, /* can also be 32k */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -785,9 +771,8 @@ static const struct clksel func_96m_clksel[] = { /* The parent of this clock is not selectable on 2420. */ static struct clk func_96m_ck = { .name = "func_96m_ck", + .ops = &clkops_null, .parent = &apll96_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -818,9 +803,8 @@ static const struct clksel func_48m_clksel[] = { static struct clk func_48m_ck = { .name = "func_48m_ck", + .ops = &clkops_null, .parent = &apll96_ck, /* 96M or Alt */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), @@ -833,10 +817,9 @@ static struct clk func_48m_ck = { static struct clk func_12m_ck = { .name = "func_12m_ck", + .ops = &clkops_null, .parent = &func_48m_ck, .fixed_div = 4, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, .clkdm_name = "wkup_clkdm", .recalc = &omap2_fixed_divisor_recalc, }; @@ -844,8 +827,8 @@ static struct clk func_12m_ck = { /* Secure timer, only available in secure mode */ static struct clk wdt1_osc_ck = { .name = "ck_wdt1_osc", + .ops = &clkops_null, /* RMK: missing? */ .parent = &osc_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .recalc = &followparent_recalc, }; @@ -887,9 +870,8 @@ static const struct clksel common_clkout_src_clksel[] = { static struct clk sys_clkout_src = { .name = "sys_clkout_src", + .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT, @@ -918,9 +900,8 @@ static const struct clksel sys_clkout_clksel[] = { static struct clk sys_clkout = { .name = "sys_clkout", + .ops = &clkops_null, .parent = &sys_clkout_src, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - PARENT_CONTROLS_CLOCK, .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK, @@ -933,8 +914,8 @@ static struct clk sys_clkout = { /* In 2430, new in 2420 ES2 */ static struct clk sys_clkout2_src = { .name = "sys_clkout2_src", + .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT, @@ -955,8 +936,8 @@ static const struct clksel sys_clkout2_clksel[] = { /* In 2430, new in 2420 ES2 */ static struct clk sys_clkout2 = { .name = "sys_clkout2", + .ops = &clkops_null, .parent = &sys_clkout2_src, - .flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK, .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK, @@ -968,8 +949,8 @@ static struct clk sys_clkout2 = { static struct clk emul_ck = { .name = "emul_ck", + .ops = &clkops_omap2_dflt, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL, .enable_bit = OMAP24XX_EMULATION_EN_SHIFT, @@ -1003,10 +984,9 @@ static const struct clksel mpu_clksel[] = { static struct clk mpu_ck = { /* Control cpu */ .name = "mpu_ck", + .ops = &clkops_null, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | - CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "mpu_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL), @@ -1046,9 +1026,9 @@ static const struct clksel dsp_fck_clksel[] = { static struct clk dsp_fck = { .name = "dsp_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | - CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "dsp_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, @@ -1076,9 +1056,9 @@ static const struct clksel dsp_irate_ick_clksel[] = { /* This clock does not exist as such in the TRM. */ static struct clk dsp_irate_ick = { .name = "dsp_irate_ick", + .ops = &clkops_null, .parent = &dsp_fck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | - CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), .clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK, .clksel = dsp_irate_ick_clksel, @@ -1090,8 +1070,9 @@ static struct clk dsp_irate_ick = { /* 2420 only */ static struct clk dsp_ick = { .name = "dsp_ick", /* apparently ipi and isp */ + .ops = &clkops_omap2_dflt_wait, .parent = &dsp_irate_ick, - .flags = CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN), .enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */ }; @@ -1099,8 +1080,9 @@ static struct clk dsp_ick = { /* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */ static struct clk iva2_1_ick = { .name = "iva2_1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &dsp_irate_ick, - .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, }; @@ -1112,9 +1094,9 @@ static struct clk iva2_1_ick = { */ static struct clk iva1_ifck = { .name = "iva1_ifck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT | - RATE_PROPAGATES | DELAYED_APP, + .flags = CONFIG_PARTICIPANT | DELAYED_APP, .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_COP_SHIFT, @@ -1129,8 +1111,8 @@ static struct clk iva1_ifck = { /* IVA1 mpu/int/i/f clocks are /2 of parent */ static struct clk iva1_mpu_int_ifck = { .name = "iva1_mpu_int_ifck", + .ops = &clkops_omap2_dflt_wait, .parent = &iva1_ifck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT, @@ -1175,10 +1157,9 @@ static const struct clksel core_l3_clksel[] = { static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ .name = "core_l3_ck", + .ops = &clkops_null, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | - CONFIG_PARTICIPANT | RATE_PROPAGATES, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "core_l3_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L3_MASK, @@ -1204,9 +1185,9 @@ static const struct clksel usb_l4_ick_clksel[] = { /* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */ static struct clk usb_l4_ick = { /* FS-USB interface clock */ .name = "usb_l4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, @@ -1238,9 +1219,9 @@ static const struct clksel l4_clksel[] = { static struct clk l4_ck = { /* used both as an ick and fck */ .name = "l4_ck", + .ops = &clkops_null, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES, + .flags = DELAYED_APP, .clkdm_name = "core_l4_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, @@ -1276,9 +1257,9 @@ static const struct clksel ssi_ssr_sst_fck_clksel[] = { static struct clk ssi_ssr_sst_fck = { .name = "ssi_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_SSI_SHIFT, @@ -1290,6 +1271,20 @@ static struct clk ssi_ssr_sst_fck = { .set_rate = &omap2_clksel_set_rate }; +/* + * Presumably this is the same as SSI_ICLK. + * TRM contradicts itself on what clockdomain SSI_ICLK is in + */ +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l4_ck, + .clkdm_name = "core_l4_clkdm", + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP24XX_EN_SSI_SHIFT, + .recalc = &followparent_recalc, +}; + /* * GFX clock domain @@ -1312,8 +1307,8 @@ static const struct clksel gfx_fck_clksel[] = { static struct clk gfx_3d_fck = { .name = "gfx_3d_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_3D_SHIFT, @@ -1327,8 +1322,8 @@ static struct clk gfx_3d_fck = { static struct clk gfx_2d_fck = { .name = "gfx_2d_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_2D_SHIFT, @@ -1342,8 +1337,8 @@ static struct clk gfx_2d_fck = { static struct clk gfx_ick = { .name = "gfx_ick", /* From l3 */ + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, @@ -1372,8 +1367,9 @@ static const struct clksel mdm_ick_clksel[] = { static struct clk mdm_ick = { /* used both as a ick and fck */ .name = "mdm_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_ck, - .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .flags = DELAYED_APP | CONFIG_PARTICIPANT, .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN), .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT, @@ -1387,8 +1383,8 @@ static struct clk mdm_ick = { /* used both as a ick and fck */ static struct clk mdm_osc_ck = { .name = "mdm_osc_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &osc_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN), .enable_bit = OMAP2430_EN_OSC_SHIFT, @@ -1432,8 +1428,8 @@ static const struct clksel dss1_fck_clksel[] = { static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ .name = "dss_ick", + .ops = &clkops_omap2_dflt, .parent = &l4_ck, /* really both l3 and l4 */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, @@ -1442,9 +1438,9 @@ static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ static struct clk dss1_fck = { .name = "dss1_fck", + .ops = &clkops_omap2_dflt, .parent = &core_ck, /* Core or sys */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, @@ -1475,9 +1471,9 @@ static const struct clksel dss2_fck_clksel[] = { static struct clk dss2_fck = { /* Alt clk used in power management */ .name = "dss2_fck", + .ops = &clkops_omap2_dflt, .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS2_SHIFT, @@ -1490,8 +1486,8 @@ static struct clk dss2_fck = { /* Alt clk used in power management */ static struct clk dss_54m_fck = { /* Alt clk used in power management */ .name = "dss_54m_fck", /* 54m tv clk */ + .ops = &clkops_omap2_dflt_wait, .parent = &func_54m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_TV_SHIFT, @@ -1518,8 +1514,8 @@ static const struct clksel omap24xx_gpt_clksel[] = { static struct clk gpt1_ick = { .name = "gpt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, @@ -1528,8 +1524,8 @@ static struct clk gpt1_ick = { static struct clk gpt1_fck = { .name = "gpt1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, @@ -1544,8 +1540,8 @@ static struct clk gpt1_fck = { static struct clk gpt2_ick = { .name = "gpt2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, @@ -1554,8 +1550,8 @@ static struct clk gpt2_ick = { static struct clk gpt2_fck = { .name = "gpt2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, @@ -1568,8 +1564,8 @@ static struct clk gpt2_fck = { static struct clk gpt3_ick = { .name = "gpt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, @@ -1578,8 +1574,8 @@ static struct clk gpt3_ick = { static struct clk gpt3_fck = { .name = "gpt3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, @@ -1592,8 +1588,8 @@ static struct clk gpt3_fck = { static struct clk gpt4_ick = { .name = "gpt4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, @@ -1602,8 +1598,8 @@ static struct clk gpt4_ick = { static struct clk gpt4_fck = { .name = "gpt4_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, @@ -1616,8 +1612,8 @@ static struct clk gpt4_fck = { static struct clk gpt5_ick = { .name = "gpt5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, @@ -1626,8 +1622,8 @@ static struct clk gpt5_ick = { static struct clk gpt5_fck = { .name = "gpt5_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, @@ -1640,8 +1636,8 @@ static struct clk gpt5_fck = { static struct clk gpt6_ick = { .name = "gpt6_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, @@ -1650,8 +1646,8 @@ static struct clk gpt6_ick = { static struct clk gpt6_fck = { .name = "gpt6_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, @@ -1664,8 +1660,8 @@ static struct clk gpt6_fck = { static struct clk gpt7_ick = { .name = "gpt7_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT7_SHIFT, .recalc = &followparent_recalc, @@ -1673,8 +1669,8 @@ static struct clk gpt7_ick = { static struct clk gpt7_fck = { .name = "gpt7_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT7_SHIFT, @@ -1687,8 +1683,8 @@ static struct clk gpt7_fck = { static struct clk gpt8_ick = { .name = "gpt8_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, @@ -1697,8 +1693,8 @@ static struct clk gpt8_ick = { static struct clk gpt8_fck = { .name = "gpt8_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, @@ -1711,8 +1707,8 @@ static struct clk gpt8_fck = { static struct clk gpt9_ick = { .name = "gpt9_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, @@ -1721,8 +1717,8 @@ static struct clk gpt9_ick = { static struct clk gpt9_fck = { .name = "gpt9_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, @@ -1735,8 +1731,8 @@ static struct clk gpt9_fck = { static struct clk gpt10_ick = { .name = "gpt10_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, @@ -1745,8 +1741,8 @@ static struct clk gpt10_ick = { static struct clk gpt10_fck = { .name = "gpt10_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, @@ -1759,8 +1755,8 @@ static struct clk gpt10_fck = { static struct clk gpt11_ick = { .name = "gpt11_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, @@ -1769,8 +1765,8 @@ static struct clk gpt11_ick = { static struct clk gpt11_fck = { .name = "gpt11_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, @@ -1783,8 +1779,8 @@ static struct clk gpt11_fck = { static struct clk gpt12_ick = { .name = "gpt12_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, @@ -1793,8 +1789,8 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, @@ -1807,9 +1803,9 @@ static struct clk gpt12_fck = { static struct clk mcbsp1_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, @@ -1818,9 +1814,9 @@ static struct clk mcbsp1_ick = { static struct clk mcbsp1_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, @@ -1829,9 +1825,9 @@ static struct clk mcbsp1_fck = { static struct clk mcbsp2_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, @@ -1840,9 +1836,9 @@ static struct clk mcbsp2_ick = { static struct clk mcbsp2_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, @@ -1851,9 +1847,9 @@ static struct clk mcbsp2_fck = { static struct clk mcbsp3_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, @@ -1862,9 +1858,9 @@ static struct clk mcbsp3_ick = { static struct clk mcbsp3_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, @@ -1873,9 +1869,9 @@ static struct clk mcbsp3_fck = { static struct clk mcbsp4_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, @@ -1884,9 +1880,9 @@ static struct clk mcbsp4_ick = { static struct clk mcbsp4_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, @@ -1895,9 +1891,9 @@ static struct clk mcbsp4_fck = { static struct clk mcbsp5_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, @@ -1906,9 +1902,9 @@ static struct clk mcbsp5_ick = { static struct clk mcbsp5_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, @@ -1917,10 +1913,10 @@ static struct clk mcbsp5_fck = { static struct clk mcspi1_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, .clkdm_name = "core_l4_clkdm", - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, .recalc = &followparent_recalc, @@ -1928,9 +1924,9 @@ static struct clk mcspi1_ick = { static struct clk mcspi1_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, @@ -1939,9 +1935,9 @@ static struct clk mcspi1_fck = { static struct clk mcspi2_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, @@ -1950,9 +1946,9 @@ static struct clk mcspi2_ick = { static struct clk mcspi2_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, @@ -1961,9 +1957,9 @@ static struct clk mcspi2_fck = { static struct clk mcspi3_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, @@ -1972,9 +1968,9 @@ static struct clk mcspi3_ick = { static struct clk mcspi3_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, @@ -1983,8 +1979,8 @@ static struct clk mcspi3_fck = { static struct clk uart1_ick = { .name = "uart1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, @@ -1993,8 +1989,8 @@ static struct clk uart1_ick = { static struct clk uart1_fck = { .name = "uart1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, @@ -2003,8 +1999,8 @@ static struct clk uart1_fck = { static struct clk uart2_ick = { .name = "uart2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, @@ -2013,8 +2009,8 @@ static struct clk uart2_ick = { static struct clk uart2_fck = { .name = "uart2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, @@ -2023,8 +2019,8 @@ static struct clk uart2_fck = { static struct clk uart3_ick = { .name = "uart3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, @@ -2033,8 +2029,8 @@ static struct clk uart3_ick = { static struct clk uart3_fck = { .name = "uart3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, @@ -2043,8 +2039,8 @@ static struct clk uart3_fck = { static struct clk gpios_ick = { .name = "gpios_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, @@ -2053,8 +2049,8 @@ static struct clk gpios_ick = { static struct clk gpios_fck = { .name = "gpios_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, @@ -2063,8 +2059,8 @@ static struct clk gpios_fck = { static struct clk mpu_wdt_ick = { .name = "mpu_wdt_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, @@ -2073,8 +2069,8 @@ static struct clk mpu_wdt_ick = { static struct clk mpu_wdt_fck = { .name = "mpu_wdt_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, @@ -2083,9 +2079,9 @@ static struct clk mpu_wdt_fck = { static struct clk sync_32k_ick = { .name = "sync_32k_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT, @@ -2094,8 +2090,8 @@ static struct clk sync_32k_ick = { static struct clk wdt1_ick = { .name = "wdt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_WDT1_SHIFT, @@ -2104,9 +2100,9 @@ static struct clk wdt1_ick = { static struct clk omapctrl_ick = { .name = "omapctrl_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT, @@ -2115,8 +2111,8 @@ static struct clk omapctrl_ick = { static struct clk icr_ick = { .name = "icr_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP2430_EN_ICR_SHIFT, @@ -2125,8 +2121,8 @@ static struct clk icr_ick = { static struct clk cam_ick = { .name = "cam_ick", + .ops = &clkops_omap2_dflt, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, @@ -2140,8 +2136,8 @@ static struct clk cam_ick = { */ static struct clk cam_fck = { .name = "cam_fck", + .ops = &clkops_omap2_dflt, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, @@ -2150,8 +2146,8 @@ static struct clk cam_fck = { static struct clk mailboxes_ick = { .name = "mailboxes_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT, @@ -2160,8 +2156,8 @@ static struct clk mailboxes_ick = { static struct clk wdt4_ick = { .name = "wdt4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, @@ -2170,8 +2166,8 @@ static struct clk wdt4_ick = { static struct clk wdt4_fck = { .name = "wdt4_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, @@ -2180,8 +2176,8 @@ static struct clk wdt4_fck = { static struct clk wdt3_ick = { .name = "wdt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, @@ -2190,8 +2186,8 @@ static struct clk wdt3_ick = { static struct clk wdt3_fck = { .name = "wdt3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, @@ -2200,8 +2196,8 @@ static struct clk wdt3_fck = { static struct clk mspro_ick = { .name = "mspro_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, @@ -2210,8 +2206,8 @@ static struct clk mspro_ick = { static struct clk mspro_fck = { .name = "mspro_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, @@ -2220,8 +2216,8 @@ static struct clk mspro_fck = { static struct clk mmc_ick = { .name = "mmc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, @@ -2230,8 +2226,8 @@ static struct clk mmc_ick = { static struct clk mmc_fck = { .name = "mmc_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, @@ -2240,8 +2236,8 @@ static struct clk mmc_fck = { static struct clk fac_ick = { .name = "fac_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, @@ -2250,8 +2246,8 @@ static struct clk fac_ick = { static struct clk fac_fck = { .name = "fac_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, @@ -2260,8 +2256,8 @@ static struct clk fac_fck = { static struct clk eac_ick = { .name = "eac_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, @@ -2270,8 +2266,8 @@ static struct clk eac_ick = { static struct clk eac_fck = { .name = "eac_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, @@ -2280,8 +2276,8 @@ static struct clk eac_fck = { static struct clk hdq_ick = { .name = "hdq_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, @@ -2290,8 +2286,8 @@ static struct clk hdq_ick = { static struct clk hdq_fck = { .name = "hdq_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, @@ -2300,9 +2296,9 @@ static struct clk hdq_fck = { static struct clk i2c2_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, @@ -2311,9 +2307,9 @@ static struct clk i2c2_ick = { static struct clk i2c2_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, @@ -2322,9 +2318,9 @@ static struct clk i2c2_fck = { static struct clk i2chs2_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS2_SHIFT, @@ -2333,9 +2329,9 @@ static struct clk i2chs2_fck = { static struct clk i2c1_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, @@ -2344,9 +2340,9 @@ static struct clk i2c1_ick = { static struct clk i2c1_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_12m_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, @@ -2355,9 +2351,9 @@ static struct clk i2c1_fck = { static struct clk i2chs1_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS1_SHIFT, @@ -2366,33 +2362,33 @@ static struct clk i2chs1_fck = { static struct clk gpmc_fck = { .name = "gpmc_fck", + .ops = &clkops_null, /* RMK: missing? */ .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; static struct clk sdma_fck = { .name = "sdma_fck", + .ops = &clkops_null, /* RMK: missing? */ .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; static struct clk sdma_ick = { .name = "sdma_ick", + .ops = &clkops_null, /* RMK: missing? */ .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; static struct clk vlynq_ick = { .name = "vlynq_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, @@ -2426,8 +2422,9 @@ static const struct clksel vlynq_fck_clksel[] = { static struct clk vlynq_fck = { .name = "vlynq_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP242X | DELAYED_APP, + .flags = DELAYED_APP, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, @@ -2442,8 +2439,9 @@ static struct clk vlynq_fck = { static struct clk sdrc_ick = { .name = "sdrc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP2430_EN_SDRC_SHIFT, @@ -2452,8 +2450,8 @@ static struct clk sdrc_ick = { static struct clk des_ick = { .name = "des_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_DES_SHIFT, @@ -2462,8 +2460,8 @@ static struct clk des_ick = { static struct clk sha_ick = { .name = "sha_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_SHA_SHIFT, @@ -2472,8 +2470,8 @@ static struct clk sha_ick = { static struct clk rng_ick = { .name = "rng_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_RNG_SHIFT, @@ -2482,8 +2480,8 @@ static struct clk rng_ick = { static struct clk aes_ick = { .name = "aes_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_AES_SHIFT, @@ -2492,8 +2490,8 @@ static struct clk aes_ick = { static struct clk pka_ick = { .name = "pka_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_PKA_SHIFT, @@ -2502,8 +2500,8 @@ static struct clk pka_ick = { static struct clk usb_fck = { .name = "usb_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_48m_ck, - .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, @@ -2512,8 +2510,8 @@ static struct clk usb_fck = { static struct clk usbhs_ick = { .name = "usbhs_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_USBHS_SHIFT, @@ -2522,8 +2520,8 @@ static struct clk usbhs_ick = { static struct clk mmchs1_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, @@ -2532,8 +2530,8 @@ static struct clk mmchs1_ick = { static struct clk mmchs1_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, @@ -2542,9 +2540,9 @@ static struct clk mmchs1_fck = { static struct clk mmchs2_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, @@ -2553,9 +2551,9 @@ static struct clk mmchs2_ick = { static struct clk mmchs2_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_96m_ck, - .flags = CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, .recalc = &followparent_recalc, @@ -2563,8 +2561,8 @@ static struct clk mmchs2_fck = { static struct clk gpio5_ick = { .name = "gpio5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, @@ -2573,8 +2571,8 @@ static struct clk gpio5_ick = { static struct clk gpio5_fck = { .name = "gpio5_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, @@ -2583,8 +2581,8 @@ static struct clk gpio5_fck = { static struct clk mdm_intc_ick = { .name = "mdm_intc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT, @@ -2593,8 +2591,8 @@ static struct clk mdm_intc_ick = { static struct clk mmchsdb1_fck = { .name = "mmchsdb_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT, @@ -2603,9 +2601,9 @@ static struct clk mmchsdb1_fck = { static struct clk mmchsdb2_fck = { .name = "mmchsdb_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &func_32k_ck, - .flags = CLOCK_IN_OMAP243X, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT, @@ -2628,166 +2626,13 @@ static struct clk mmchsdb2_fck = { */ static struct clk virt_prcm_set = { .name = "virt_prcm_set", - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, + .ops = &clkops_null, + .flags = DELAYED_APP, .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ .recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */ .set_rate = &omap2_select_table_rate, .round_rate = &omap2_round_to_table_rate, }; -static struct clk *onchip_24xx_clks[] __initdata = { - /* external root sources */ - &func_32k_ck, - &osc_ck, - &sys_ck, - &alt_ck, - /* internal analog sources */ - &dpll_ck, - &apll96_ck, - &apll54_ck, - /* internal prcm root sources */ - &func_54m_ck, - &core_ck, - &func_96m_ck, - &func_48m_ck, - &func_12m_ck, - &wdt1_osc_ck, - &sys_clkout_src, - &sys_clkout, - &sys_clkout2_src, - &sys_clkout2, - &emul_ck, - /* mpu domain clocks */ - &mpu_ck, - /* dsp domain clocks */ - &dsp_fck, - &dsp_irate_ick, - &dsp_ick, /* 242x */ - &iva2_1_ick, /* 243x */ - &iva1_ifck, /* 242x */ - &iva1_mpu_int_ifck, /* 242x */ - /* GFX domain clocks */ - &gfx_3d_fck, - &gfx_2d_fck, - &gfx_ick, - /* Modem domain clocks */ - &mdm_ick, - &mdm_osc_ck, - /* DSS domain clocks */ - &dss_ick, - &dss1_fck, - &dss2_fck, - &dss_54m_fck, - /* L3 domain clocks */ - &core_l3_ck, - &ssi_ssr_sst_fck, - &usb_l4_ick, - /* L4 domain clocks */ - &l4_ck, /* used as both core_l4 and wu_l4 */ - /* virtual meta-group clock */ - &virt_prcm_set, - /* general l4 interface ck, multi-parent functional clk */ - &gpt1_ick, - &gpt1_fck, - &gpt2_ick, - &gpt2_fck, - &gpt3_ick, - &gpt3_fck, - &gpt4_ick, - &gpt4_fck, - &gpt5_ick, - &gpt5_fck, - &gpt6_ick, - &gpt6_fck, - &gpt7_ick, - &gpt7_fck, - &gpt8_ick, - &gpt8_fck, - &gpt9_ick, - &gpt9_fck, - &gpt10_ick, - &gpt10_fck, - &gpt11_ick, - &gpt11_fck, - &gpt12_ick, - &gpt12_fck, - &mcbsp1_ick, - &mcbsp1_fck, - &mcbsp2_ick, - &mcbsp2_fck, - &mcbsp3_ick, - &mcbsp3_fck, - &mcbsp4_ick, - &mcbsp4_fck, - &mcbsp5_ick, - &mcbsp5_fck, - &mcspi1_ick, - &mcspi1_fck, - &mcspi2_ick, - &mcspi2_fck, - &mcspi3_ick, - &mcspi3_fck, - &uart1_ick, - &uart1_fck, - &uart2_ick, - &uart2_fck, - &uart3_ick, - &uart3_fck, - &gpios_ick, - &gpios_fck, - &mpu_wdt_ick, - &mpu_wdt_fck, - &sync_32k_ick, - &wdt1_ick, - &omapctrl_ick, - &icr_ick, - &cam_fck, - &cam_ick, - &mailboxes_ick, - &wdt4_ick, - &wdt4_fck, - &wdt3_ick, - &wdt3_fck, - &mspro_ick, - &mspro_fck, - &mmc_ick, - &mmc_fck, - &fac_ick, - &fac_fck, - &eac_ick, - &eac_fck, - &hdq_ick, - &hdq_fck, - &i2c1_ick, - &i2c1_fck, - &i2chs1_fck, - &i2c2_ick, - &i2c2_fck, - &i2chs2_fck, - &gpmc_fck, - &sdma_fck, - &sdma_ick, - &vlynq_ick, - &vlynq_fck, - &sdrc_ick, - &des_ick, - &sha_ick, - &rng_ick, - &aes_ick, - &pka_ick, - &usb_fck, - &usbhs_ick, - &mmchs1_ick, - &mmchs1_fck, - &mmchs2_ick, - &mmchs2_fck, - &gpio5_ick, - &gpio5_fck, - &mdm_intc_ick, - &mmchsdb1_fck, - &mmchsdb2_fck, -}; - #endif diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 31bb7010bd4..0a14dca31e3 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -30,15 +30,251 @@ #include <mach/clock.h> #include <mach/sram.h> #include <asm/div64.h> +#include <asm/clkdev.h> -#include "memory.h" +#include <mach/sdrc.h> #include "clock.h" -#include "clock34xx.h" #include "prm.h" #include "prm-regbits-34xx.h" #include "cm.h" #include "cm-regbits-34xx.h" +static const struct clkops clkops_noncore_dpll_ops; + +#include "clock34xx.h" + +struct omap_clk { + u32 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +#define CK_343X (1 << 0) +#define CK_3430ES1 (1 << 1) +#define CK_3430ES2 (1 << 2) + +static struct omap_clk omap34xx_clks[] = { + CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), + CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), + CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), + CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), + CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), + CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), + CLK(NULL, "sys_ck", &sys_ck, CK_343X), + CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), + CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), + CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), + CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), + CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), + CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), + CLK(NULL, "core_ck", &core_ck, CK_343X), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), + CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), + CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), + CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), + CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), + CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), + CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), + CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), + CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), + CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), + CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), + CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), + CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), + CLK(NULL, "arm_fck", &arm_fck, CK_343X), + CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), + CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), + CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), + CLK(NULL, "l3_ick", &l3_ick, CK_343X), + CLK(NULL, "l4_ick", &l4_ick, CK_343X), + CLK(NULL, "rm_ick", &rm_ick, CK_343X), + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), + CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), + CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), + CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), + CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), + CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), + CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), + CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), + CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), + CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), + CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), + CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), + CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), + CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), + CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), + CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), + CLK(NULL, "pka_ick", &pka_ick, CK_343X), + CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), + CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), + CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), + CLK(NULL, "icr_ick", &icr_ick, CK_343X), + CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), + CLK(NULL, "des2_ick", &des2_ick, CK_343X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), + CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), + CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick, CK_343X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), + CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), + CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), + CLK("omap_rng", "ick", &rng_ick, CK_343X), + CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), + CLK(NULL, "des1_ick", &des1_ick, CK_343X), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), + CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X), + CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X), + CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X), + CLK(NULL, "dss_ick", &dss_ick, CK_343X), + CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), + CLK(NULL, "cam_ick", &cam_ick, CK_343X), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), + CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), + CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), + CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), + CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), + CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), + CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), + CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), + CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), + CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), + CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), + CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), + CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), + CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), + CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), + CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), + CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), + CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), + CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), + CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), + CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X), + CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), + CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), + CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), + CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), + CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), + CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), + CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), + CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), + CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), +}; + /* CM_AUTOIDLE_PLL*.AUTO_* bit values */ #define DPLL_AUTOIDLE_DISABLE 0x0 #define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 @@ -51,11 +287,9 @@ * * Recalculate and propagate the DPLL rate. */ -static void omap3_dpll_recalc(struct clk *clk) +static unsigned long omap3_dpll_recalc(struct clk *clk) { - clk->rate = omap2_get_dpll_rate(clk); - - propagate_rate(clk); + return omap2_get_dpll_rate(clk); } /* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ @@ -78,14 +312,12 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) const struct dpll_data *dd; int i = 0; int ret = -EINVAL; - u32 idlest_mask; dd = clk->dpll_data; - state <<= dd->idlest_bit; - idlest_mask = 1 << dd->idlest_bit; + state <<= __ffs(dd->idlest_mask); - while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) && + while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && i < MAX_DPLL_WAIT_TRIES) { i++; udelay(1); @@ -104,6 +336,42 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) return ret; } +/* From 3430 TRM ES2 4.7.6.2 */ +static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) +{ + unsigned long fint; + u16 f = 0; + + fint = clk->dpll_data->clk_ref->rate / (n + 1); + + pr_debug("clock: fint is %lu\n", fint); + + if (fint >= 750000 && fint <= 1000000) + f = 0x3; + else if (fint > 1000000 && fint <= 1250000) + f = 0x4; + else if (fint > 1250000 && fint <= 1500000) + f = 0x5; + else if (fint > 1500000 && fint <= 1750000) + f = 0x6; + else if (fint > 1750000 && fint <= 2100000) + f = 0x7; + else if (fint > 7500000 && fint <= 10000000) + f = 0xB; + else if (fint > 10000000 && fint <= 12500000) + f = 0xC; + else if (fint > 12500000 && fint <= 15000000) + f = 0xD; + else if (fint > 15000000 && fint <= 17500000) + f = 0xE; + else if (fint > 17500000 && fint <= 21000000) + f = 0xF; + else + pr_debug("clock: unknown freqsel setting for %d\n", n); + + return f; +} + /* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ /* @@ -128,25 +396,20 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) ai = omap3_dpll_autoidle_read(clk); + omap3_dpll_deny_idle(clk); + _omap3_dpll_write_clken(clk, DPLL_LOCKED); - if (ai) { - /* - * If no downstream clocks are enabled, CM_IDLEST bit - * may never become active, so don't wait for DPLL to lock. - */ - r = 0; + r = _omap3_wait_dpll_status(clk, 1); + + if (ai) omap3_dpll_allow_idle(clk); - } else { - r = _omap3_wait_dpll_status(clk, 1); - omap3_dpll_deny_idle(clk); - }; return r; } /* - * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness + * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness * @clk: pointer to a DPLL struct clk * * Instructs a non-CORE DPLL to enter low-power bypass mode. In @@ -236,14 +499,25 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) static int omap3_noncore_dpll_enable(struct clk *clk) { int r; + struct dpll_data *dd; if (clk == &dpll3_ck) return -EINVAL; - if (clk->parent->rate == clk_get_rate(clk)) + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (clk->rate == dd->clk_bypass->rate) { + WARN_ON(clk->parent != dd->clk_bypass); r = _omap3_noncore_dpll_bypass(clk); - else + } else { + WARN_ON(clk->parent != dd->clk_ref); r = _omap3_noncore_dpll_lock(clk); + } + /* FIXME: this is dubious - if clk->rate has changed, what about propagating? */ + if (!r) + clk->rate = omap2_get_dpll_rate(clk); return r; } @@ -270,6 +544,215 @@ static void omap3_noncore_dpll_disable(struct clk *clk) _omap3_noncore_dpll_stop(clk); } + +/* Non-CORE DPLL rate set code */ + +/* + * omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * @clk: struct clk * of DPLL to set + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * @freqsel: FREQSEL value to set + * + * Program the DPLL with the supplied M, N values, and wait for the DPLL to + * lock.. Returns -EINVAL upon error, or 0 upon success. + */ +static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) +{ + struct dpll_data *dd = clk->dpll_data; + u32 v; + + /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ + _omap3_noncore_dpll_bypass(clk); + + /* Set jitter correction */ + v = __raw_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + __raw_writel(v, dd->control_reg); + + /* Set DPLL multiplier, divider */ + v = __raw_readl(dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + v |= m << __ffs(dd->mult_mask); + v |= (n - 1) << __ffs(dd->div1_mask); + __raw_writel(v, dd->mult_div1_reg); + + /* We let the clock framework set the other output dividers later */ + + /* REVISIT: Set ramp-up delay? */ + + _omap3_noncore_dpll_lock(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_set_rate - set non-core DPLL rate + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Set the DPLL CLKOUT to the target rate. If the DPLL can enter + * low-power bypass, and the target rate is the bypass source clock + * rate, then configure the DPLL for bypass. Otherwise, round the + * target rate if it hasn't been done already, then program and lock + * the DPLL. Returns -EINVAL upon error, or 0 upon success. + */ +static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *new_parent = NULL; + u16 freqsel; + struct dpll_data *dd; + int ret; + + if (!clk || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (rate == omap2_get_dpll_rate(clk)) + return 0; + + /* + * Ensure both the bypass and ref clocks are enabled prior to + * doing anything; we need the bypass clock running to reprogram + * the DPLL. + */ + omap2_clk_enable(dd->clk_bypass); + omap2_clk_enable(dd->clk_ref); + + if (dd->clk_bypass->rate == rate && + (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); + + ret = _omap3_noncore_dpll_bypass(clk); + if (!ret) + new_parent = dd->clk_bypass; + } else { + if (dd->last_rounded_rate != rate) + omap2_dpll_round_rate(clk, rate); + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); + if (!freqsel) + WARN_ON(1); + + pr_debug("clock: %s: set rate: locking rate to %lu.\n", + clk->name, rate); + + ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, + dd->last_rounded_n, freqsel); + if (!ret) + new_parent = dd->clk_ref; + } + if (!ret) { + /* + * Switch the parent clock in the heirarchy, and make sure + * that the new parent's usecount is correct. Note: we + * enable the new parent before disabling the old to avoid + * any unnecessary hardware disable->enable transitions. + */ + if (clk->usecount) { + omap2_clk_enable(new_parent); + omap2_clk_disable(clk->parent); + } + clk_reparent(clk, new_parent); + clk->rate = rate; + } + omap2_clk_disable(dd->clk_ref); + omap2_clk_disable(dd->clk_bypass); + + return 0; +} + +static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) +{ + /* + * According to the 12-5 CDP code from TI, "Limitation 2.5" + * on 3430ES1 prevents us from changing DPLL multipliers or dividers + * on DPLL4. + */ + if (omap_rev() == OMAP3430_REV_ES1_0) { + printk(KERN_ERR "clock: DPLL4 cannot change rate due to " + "silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + return omap3_noncore_dpll_set_rate(clk, rate); +} + + +/* + * CORE DPLL (DPLL3) rate programming functions + * + * These call into SRAM code to do the actual CM writes, since the SDRAM + * is clocked from DPLL3. + */ + +/** + * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Program the DPLL M2 divider with the rounded target rate. Returns + * -EINVAL upon error, or 0 upon success. + */ +static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div = 0; + unsigned long validrate, sdrcrate; + struct omap_sdrc_params *sp; + + if (!clk || !rate) + return -EINVAL; + + if (clk != &dpll3_m2_ck) + return -EINVAL; + + if (rate == clk->rate) + return 0; + + validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); + if (validrate != rate) + return -EINVAL; + + sdrcrate = sdrc_ick.rate; + if (rate > clk->rate) + sdrcrate <<= ((rate / clk->rate) - 1); + else + sdrcrate >>= ((clk->rate / rate) - 1); + + sp = omap2_sdrc_get_params(sdrcrate); + if (!sp) + return -EINVAL; + + pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, + validrate); + pr_info("clock: SDRC timing params used: %08x %08x %08x\n", + sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + + /* REVISIT: SRAM code doesn't support other M2 divisors yet */ + WARN_ON(new_div != 1 && new_div != 2); + + /* REVISIT: Add SDRC_MR changing to this code also */ + omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, + sp->actim_ctrlb, new_div); + + return 0; +} + + +static const struct clkops clkops_noncore_dpll_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, +}; + +/* DPLL autoidle read/set code */ + + /** * omap3_dpll_autoidle_read - read a DPLL's autoidle bits * @clk: struct clk * of the DPLL to read @@ -356,9 +839,10 @@ static void omap3_dpll_deny_idle(struct clk *clk) * Using parent clock DPLL data, look up DPLL state. If locked, set our * rate to the dpll_clk * 2; otherwise, just use dpll_clk. */ -static void omap3_clkoutx2_recalc(struct clk *clk) +static unsigned long omap3_clkoutx2_recalc(struct clk *clk) { const struct dpll_data *dd; + unsigned long rate; u32 v; struct clk *pclk; @@ -372,17 +856,15 @@ static void omap3_clkoutx2_recalc(struct clk *clk) dd = pclk->dpll_data; - WARN_ON(!dd->control_reg || !dd->enable_mask); + WARN_ON(!dd->enable_mask); v = __raw_readl(dd->control_reg) & dd->enable_mask; v >>= __ffs(dd->enable_mask); - if (v != DPLL_LOCKED) - clk->rate = clk->parent->rate; + if (v != OMAP3XXX_EN_DPLL_LOCKED) + rate = clk->parent->rate; else - clk->rate = clk->parent->rate * 2; - - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); + rate = clk->parent->rate * 2; + return rate; } /* Common clock code */ @@ -432,7 +914,7 @@ static int __init omap2_clk_arch_init(void) /* REVISIT: not yet ready for 343x */ #if 0 - if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + if (clk_set_rate(&virt_prcm_set, mpurate)) printk(KERN_ERR "Could not find matching MPU rate\n"); #endif @@ -450,26 +932,13 @@ arch_initcall(omap2_clk_arch_init); int __init omap2_clk_init(void) { /* struct prcm_config *prcm; */ - struct clk **clkp; + struct omap_clk *c; /* u32 clkrate; */ u32 cpu_clkflg; - /* REVISIT: Ultimately this will be used for multiboot */ -#if 0 - if (cpu_is_omap242x()) { - cpu_mask = RATE_IN_242X; - cpu_clkflg = CLOCK_IN_OMAP242X; - clkp = onchip_24xx_clks; - } else if (cpu_is_omap2430()) { - cpu_mask = RATE_IN_243X; - cpu_clkflg = CLOCK_IN_OMAP243X; - clkp = onchip_24xx_clks; - } -#endif if (cpu_is_omap34xx()) { cpu_mask = RATE_IN_343X; - cpu_clkflg = CLOCK_IN_OMAP343X; - clkp = onchip_34xx_clks; + cpu_clkflg = CK_343X; /* * Update this if there are further clock changes between ES2 @@ -477,23 +946,24 @@ int __init omap2_clk_init(void) */ if (omap_rev() == OMAP3430_REV_ES1_0) { /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ - cpu_clkflg |= CLOCK_IN_OMAP3430ES1; + cpu_clkflg |= CK_3430ES1; } else { cpu_mask |= RATE_IN_3430ES2; - cpu_clkflg |= CLOCK_IN_OMAP3430ES2; + cpu_clkflg |= CK_3430ES2; } } clk_init(&omap2_clk_functions); - for (clkp = onchip_34xx_clks; - clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks); - clkp++) { - if ((*clkp)->flags & cpu_clkflg) { - clk_register(*clkp); - omap2_init_clk_clkdm(*clkp); + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + clk_init_one(c->lk.clk); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); } - } /* REVISIT: Not yet ready for OMAP3 */ #if 0 diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index a826094d89b..70ec10deb65 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -27,13 +27,14 @@ #include "prm.h" #include "prm-regbits-34xx.h" -static void omap3_dpll_recalc(struct clk *clk); -static void omap3_clkoutx2_recalc(struct clk *clk); +static unsigned long omap3_dpll_recalc(struct clk *clk); +static unsigned long omap3_clkoutx2_recalc(struct clk *clk); static void omap3_dpll_allow_idle(struct clk *clk); static void omap3_dpll_deny_idle(struct clk *clk); static u32 omap3_dpll_autoidle_read(struct clk *clk); -static int omap3_noncore_dpll_enable(struct clk *clk); -static void omap3_noncore_dpll_disable(struct clk *clk); +static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); +static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); +static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); /* Maximum DPLL multiplier, divider values for OMAP3 */ #define OMAP3_MAX_DPLL_MULT 2048 @@ -47,6 +48,10 @@ static void omap3_noncore_dpll_disable(struct clk *clk); * DPLL5 supplies other peripheral clocks (USBHOST, USIM). */ +/* Forward declarations for DPLL bypass clocks */ +static struct clk dpll1_fck; +static struct clk dpll2_fck; + /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ #define DPLL_LOW_POWER_STOP 0x1 #define DPLL_LOW_POWER_BYPASS 0x5 @@ -57,67 +62,59 @@ static void omap3_noncore_dpll_disable(struct clk *clk); /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ static struct clk omap_32k_fck = { .name = "omap_32k_fck", + .ops = &clkops_null, .rate = 32768, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; static struct clk secure_32k_fck = { .name = "secure_32k_fck", + .ops = &clkops_null, .rate = 32768, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; /* Virtual source clocks for osc_sys_ck */ static struct clk virt_12m_ck = { .name = "virt_12m_ck", + .ops = &clkops_null, .rate = 12000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; static struct clk virt_13m_ck = { .name = "virt_13m_ck", + .ops = &clkops_null, .rate = 13000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; static struct clk virt_16_8m_ck = { .name = "virt_16_8m_ck", + .ops = &clkops_null, .rate = 16800000, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; static struct clk virt_19_2m_ck = { .name = "virt_19_2m_ck", + .ops = &clkops_null, .rate = 19200000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; static struct clk virt_26m_ck = { .name = "virt_26m_ck", + .ops = &clkops_null, .rate = 26000000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; static struct clk virt_38_4m_ck = { .name = "virt_38_4m_ck", + .ops = &clkops_null, .rate = 38400000, - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, - .recalc = &propagate_rate, + .flags = RATE_FIXED, }; static const struct clksel_rate osc_sys_12m_rates[] = { @@ -164,13 +161,13 @@ static const struct clksel osc_sys_clksel[] = { /* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ static struct clk osc_sys_ck = { .name = "osc_sys_ck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP3430_PRM_CLKSEL, .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, .clksel = osc_sys_clksel, /* REVISIT: deal with autoextclkmode? */ - .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES | - ALWAYS_ENABLED, + .flags = RATE_FIXED, .recalc = &omap2_clksel_recalc, }; @@ -189,36 +186,34 @@ static const struct clksel sys_clksel[] = { /* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ static struct clk sys_ck = { .name = "sys_ck", + .ops = &clkops_null, .parent = &osc_sys_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, .clksel_mask = OMAP_SYSCLKDIV_MASK, .clksel = sys_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .recalc = &omap2_clksel_recalc, }; static struct clk sys_altclk = { .name = "sys_altclk", - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, - .recalc = &propagate_rate, + .ops = &clkops_null, }; /* Optional external clock input for some McBSPs */ static struct clk mcbsp_clks = { .name = "mcbsp_clks", - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, - .recalc = &propagate_rate, + .ops = &clkops_null, }; /* PRM EXTERNAL CLOCK OUTPUT */ static struct clk sys_clkout1 = { .name = "sys_clkout1", + .ops = &clkops_omap2_dflt, .parent = &osc_sys_ck, .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -226,16 +221,6 @@ static struct clk sys_clkout1 = { /* CM CLOCKS */ -static const struct clksel_rate dpll_bypass_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate dpll_locked_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - static const struct clksel_rate div16_dpll_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, { .div = 2, .val = 2, .flags = RATE_IN_343X }, @@ -263,6 +248,9 @@ static struct dpll_data dpll1_dd = { .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, + .clk_bypass = &dpll1_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), @@ -272,18 +260,21 @@ static struct dpll_data dpll1_dd = { .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_bit = OMAP3430_ST_MPU_CLK_SHIFT, + .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; static struct clk dpll1_ck = { .name = "dpll1_ck", + .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll1_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll1_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -293,9 +284,9 @@ static struct clk dpll1_ck = { */ static struct clk dpll1_x2_ck = { .name = "dpll1_x2_ck", + .ops = &clkops_null, .parent = &dpll1_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll1_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -311,13 +302,13 @@ static const struct clksel div16_dpll1_x2m2_clksel[] = { */ static struct clk dpll1_x2m2_ck = { .name = "dpll1_x2m2_ck", + .ops = &clkops_null, .parent = &dpll1_x2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll1_x2m2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll1_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -329,6 +320,9 @@ static struct dpll_data dpll2_dd = { .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, + .clk_bypass = &dpll2_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | @@ -339,20 +333,21 @@ static struct dpll_data dpll2_dd = { .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_bit = OMAP3430_ST_IVA2_CLK_SHIFT, + .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; static struct clk dpll2_ck = { .name = "dpll2_ck", + .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll2_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll2_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -367,14 +362,14 @@ static const struct clksel div16_dpll2_m2x2_clksel[] = { */ static struct clk dpll2_m2_ck = { .name = "dpll2_m2_ck", + .ops = &clkops_null, .parent = &dpll2_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL2_PLL), .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, .clksel = div16_dpll2_m2x2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll2_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -387,6 +382,9 @@ static struct dpll_data dpll3_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, @@ -394,17 +392,21 @@ static struct dpll_data dpll3_dd = { .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; static struct clk dpll3_ck = { .name = "dpll3_ck", + .ops = &clkops_null, .parent = &sys_ck, .dpll_data = &dpll3_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .round_rate = &omap2_dpll_round_rate, + .clkdm_name = "dpll3_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -414,9 +416,9 @@ static struct clk dpll3_ck = { */ static struct clk dpll3_x2_ck = { .name = "dpll3_x2_ck", + .ops = &clkops_null, .parent = &dpll3_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll3_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -460,55 +462,34 @@ static const struct clksel div31_dpll3m2_clksel[] = { { .parent = NULL } }; -/* - * DPLL3 output M2 - * REVISIT: This DPLL output divider must be changed in SRAM, so until - * that code is ready, this should remain a 'read-only' clksel clock. - */ +/* DPLL3 output M2 - primary control point for CORE speed */ static struct clk dpll3_m2_ck = { .name = "dpll3_m2_ck", + .ops = &clkops_null, .parent = &dpll3_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, .clksel = div31_dpll3m2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll3_clkdm", + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap3_core_dpll_m2_set_rate, .recalc = &omap2_clksel_recalc, }; -static const struct clksel core_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll3_m2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - static struct clk core_ck = { .name = "core_ck", - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, - .clksel = core_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel dpll3_m2x2_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll3_x2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } + .ops = &clkops_null, + .parent = &dpll3_m2_ck, + .recalc = &followparent_recalc, }; static struct clk dpll3_m2x2_ck = { .name = "dpll3_m2x2_ck", - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, - .clksel = dpll3_m2x2_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, + .ops = &clkops_null, + .parent = &dpll3_x2_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &followparent_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ @@ -520,42 +501,34 @@ static const struct clksel div16_dpll3_clksel[] = { /* This virtual clock is the source for dpll3_m3x2_ck */ static struct clk dpll3_m3_ck = { .name = "dpll3_m3_ck", + .ops = &clkops_null, .parent = &dpll3_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL3_MASK, .clksel = div16_dpll3_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll3_clkdm", .recalc = &omap2_clksel_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll3_m3x2_ck = { .name = "dpll3_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll3_m3_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll3_clkdm", .recalc = &omap3_clkoutx2_recalc, }; -static const struct clksel emu_core_alwon_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - static struct clk emu_core_alwon_ck = { .name = "emu_core_alwon_ck", + .ops = &clkops_null, .parent = &dpll3_m3x2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_CORE_CLK_MASK, - .clksel = emu_core_alwon_ck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, + .clkdm_name = "dpll3_clkdm", + .recalc = &followparent_recalc, }; /* DPLL4 */ @@ -565,6 +538,9 @@ static struct dpll_data dpll4_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), @@ -574,20 +550,21 @@ static struct dpll_data dpll4_dd = { .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_bit = OMAP3430_ST_PERIPH_CLK_SHIFT, + .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; static struct clk dpll4_ck = { .name = "dpll4_ck", + .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll4_dd, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_dpll4_set_rate, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -598,9 +575,9 @@ static struct clk dpll4_ck = { */ static struct clk dpll4_x2_ck = { .name = "dpll4_x2_ck", + .ops = &clkops_null, .parent = &dpll4_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; @@ -612,112 +589,101 @@ static const struct clksel div16_dpll4_clksel[] = { /* This virtual clock is the source for dpll4_m2x2_ck */ static struct clk dpll4_m2_ck = { .name = "dpll4_m2_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), .clksel_mask = OMAP3430_DIV_96M_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m2x2_ck = { .name = "dpll4_m2x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m2_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_96M_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; -static const struct clksel omap_96m_alwon_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - +/* + * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as + * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: + * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and + * CM_96K_(F)CLK. + */ static struct clk omap_96m_alwon_fck = { .name = "omap_96m_alwon_fck", + .ops = &clkops_null, .parent = &dpll4_m2x2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .clksel = omap_96m_alwon_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, + .recalc = &followparent_recalc, }; -static struct clk omap_96m_fck = { - .name = "omap_96m_fck", +static struct clk cm_96m_fck = { + .name = "cm_96m_fck", + .ops = &clkops_null, .parent = &omap_96m_alwon_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &followparent_recalc, }; -static const struct clksel cm_96m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, +static const struct clksel_rate omap_96m_dpll_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_96m_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_96m_fck_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, + { .parent = &sys_ck, .rates = omap_96m_sys_rates }, { .parent = NULL } }; -static struct clk cm_96m_fck = { - .name = "cm_96m_fck", - .parent = &dpll4_m2x2_ck, +static struct clk omap_96m_fck = { + .name = "omap_96m_fck", + .ops = &clkops_null, + .parent = &sys_ck, .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .clksel = cm_96m_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_96M_MASK, + .clksel = omap_96m_fck_clksel, .recalc = &omap2_clksel_recalc, }; /* This virtual clock is the source for dpll4_m3x2_ck */ static struct clk dpll4_m3_ck = { .name = "dpll4_m3_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_TV_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m3x2_ck = { .name = "dpll4_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m3_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_TV_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; -static const struct clksel virt_omap_54m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - -static struct clk virt_omap_54m_fck = { - .name = "virt_omap_54m_fck", - .parent = &dpll4_m3x2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .clksel = virt_omap_54m_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, -}; - static const struct clksel_rate omap_54m_d4m3x2_rates[] = { { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, { .div = 0 } @@ -729,23 +695,22 @@ static const struct clksel_rate omap_54m_alt_rates[] = { }; static const struct clksel omap_54m_clksel[] = { - { .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates }, + { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates }, { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, { .parent = NULL } }; static struct clk omap_54m_fck = { .name = "omap_54m_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_54M, + .clksel_mask = OMAP3430_SOURCE_54M_MASK, .clksel = omap_54m_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &omap2_clksel_recalc, }; -static const struct clksel_rate omap_48m_96md2_rates[] = { +static const struct clksel_rate omap_48m_cm96m_rates[] = { { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, { .div = 0 } }; @@ -756,106 +721,112 @@ static const struct clksel_rate omap_48m_alt_rates[] = { }; static const struct clksel omap_48m_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates }, + { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, { .parent = NULL } }; static struct clk omap_48m_fck = { .name = "omap_48m_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_48M, + .clksel_mask = OMAP3430_SOURCE_48M_MASK, .clksel = omap_48m_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &omap2_clksel_recalc, }; static struct clk omap_12m_fck = { .name = "omap_12m_fck", + .ops = &clkops_null, .parent = &omap_48m_fck, .fixed_div = 4, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &omap2_fixed_divisor_recalc, }; /* This virstual clock is the source for dpll4_m4x2_ck */ static struct clk dpll4_m4_ck = { .name = "dpll4_m4_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, + .set_rate = &omap2_clksel_set_rate, + .round_rate = &omap2_clksel_round_rate, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m4x2_ck = { .name = "dpll4_m4x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m4_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; /* This virtual clock is the source for dpll4_m5x2_ck */ static struct clk dpll4_m5_ck = { .name = "dpll4_m5_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m5x2_ck = { .name = "dpll4_m5x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m5_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; /* This virtual clock is the source for dpll4_m6x2_ck */ static struct clk dpll4_m6_ck = { .name = "dpll4_m6_ck", + .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL4_MASK, .clksel = div16_dpll4_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ static struct clk dpll4_m6x2_ck = { .name = "dpll4_m6x2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m6_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, }; static struct clk emu_per_alwon_ck = { .name = "emu_per_alwon_ck", + .ops = &clkops_null, .parent = &dpll4_m6x2_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll4_clkdm", .recalc = &followparent_recalc, }; @@ -867,6 +838,9 @@ static struct dpll_data dpll5_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), @@ -876,20 +850,21 @@ static struct dpll_data dpll5_dd = { .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .idlest_bit = OMAP3430ES2_ST_PERIPH2_CLK_SHIFT, + .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, .max_divider = OMAP3_MAX_DPLL_DIV, .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE }; static struct clk dpll5_ck = { .name = "dpll5_ck", + .ops = &clkops_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll5_dd, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll5_clkdm", .recalc = &omap3_dpll_recalc, }; @@ -900,31 +875,13 @@ static const struct clksel div16_dpll5_clksel[] = { static struct clk dpll5_m2_ck = { .name = "dpll5_m2_ck", + .ops = &clkops_null, .parent = &dpll5_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), .clksel_mask = OMAP3430ES2_DIV_120M_MASK, .clksel = div16_dpll5_clksel, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel omap_120m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll5_m2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - -static struct clk omap_120m_fck = { - .name = "omap_120m_fck", - .parent = &dpll5_m2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, - .clksel = omap_120m_fck_clksel, - .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clkdm_name = "dpll5_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -951,22 +908,23 @@ static const struct clksel_rate clkout2_src_54m_rates[] = { }; static const struct clksel clkout2_src_clksel[] = { - { .parent = &core_ck, .rates = clkout2_src_core_rates }, - { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, - { .parent = &omap_96m_alwon_fck, .rates = clkout2_src_96m_rates }, - { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, + { .parent = &core_ck, .rates = clkout2_src_core_rates }, + { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, + { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, + { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, { .parent = NULL } }; static struct clk clkout2_src_ck = { .name = "clkout2_src_ck", + .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, .enable_reg = OMAP3430_CM_CLKOUT_CTRL, .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, .clksel = clkout2_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .clkdm_name = "core_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -986,11 +944,11 @@ static const struct clksel sys_clkout2_clksel[] = { static struct clk sys_clkout2 = { .name = "sys_clkout2", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, .clksel = sys_clkout2_clksel, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, .recalc = &omap2_clksel_recalc, }; @@ -998,16 +956,22 @@ static struct clk sys_clkout2 = { static struct clk corex2_fck = { .name = "corex2_fck", + .ops = &clkops_null, .parent = &dpll3_m2x2_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &followparent_recalc, }; /* DPLL power domain clock controls */ -static const struct clksel div2_core_clksel[] = { - { .parent = &core_ck, .rates = div2_rates }, +static const struct clksel_rate div4_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel div4_core_clksel[] = { + { .parent = &core_ck, .rates = div4_rates }, { .parent = NULL } }; @@ -1017,39 +981,21 @@ static const struct clksel div2_core_clksel[] = { */ static struct clk dpll1_fck = { .name = "dpll1_fck", + .ops = &clkops_null, .parent = &core_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, - .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clksel = div4_core_clksel, .recalc = &omap2_clksel_recalc, }; -/* - * MPU clksel: - * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck - * derives from the high-frequency bypass clock originating from DPLL3, - * called 'dpll1_fck' - */ -static const struct clksel mpu_clksel[] = { - { .parent = &dpll1_fck, .rates = dpll_bypass_rates }, - { .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - static struct clk mpu_ck = { .name = "mpu_ck", + .ops = &clkops_null, .parent = &dpll1_x2m2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, - .clksel = mpu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "mpu_clkdm", - .recalc = &omap2_clksel_recalc, + .recalc = &followparent_recalc, }; /* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ @@ -1066,13 +1012,12 @@ static const struct clksel arm_fck_clksel[] = { static struct clk arm_fck = { .name = "arm_fck", + .ops = &clkops_null, .parent = &mpu_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, .clksel = arm_fck_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &omap2_clksel_recalc, }; @@ -1084,63 +1029,48 @@ static struct clk arm_fck = { */ static struct clk emu_mpu_alwon_ck = { .name = "emu_mpu_alwon_ck", + .ops = &clkops_null, .parent = &mpu_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &followparent_recalc, }; static struct clk dpll2_fck = { .name = "dpll2_fck", + .ops = &clkops_null, .parent = &core_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, - .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + .clksel = div4_core_clksel, .recalc = &omap2_clksel_recalc, }; -/* - * IVA2 clksel: - * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck - * derives from the high-frequency bypass clock originating from DPLL3, - * called 'dpll2_fck' - */ - -static const struct clksel iva2_clksel[] = { - { .parent = &dpll2_fck, .rates = dpll_bypass_rates }, - { .parent = &dpll2_m2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - static struct clk iva2_ck = { .name = "iva2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll2_m2_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, - OMAP3430_CM_IDLEST_PLL), - .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK, - .clksel = iva2_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "iva2_clkdm", - .recalc = &omap2_clksel_recalc, + .recalc = &followparent_recalc, }; /* Common interface clocks */ +static const struct clksel div2_core_clksel[] = { + { .parent = &core_ck, .rates = div2_rates }, + { .parent = NULL } +}; + static struct clk l3_ick = { .name = "l3_ick", + .ops = &clkops_null, .parent = &core_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L3_MASK, .clksel = div2_core_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1152,13 +1082,12 @@ static const struct clksel div2_l3_clksel[] = { static struct clk l4_ick = { .name = "l4_ick", + .ops = &clkops_null, .parent = &l3_ick, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_L4_MASK, .clksel = div2_l3_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, @@ -1171,12 +1100,12 @@ static const struct clksel div2_l4_clksel[] = { static struct clk rm_ick = { .name = "rm_ick", + .ops = &clkops_null, .parent = &l4_ick, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_RM_MASK, .clksel = div2_l4_clksel, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, .recalc = &omap2_clksel_recalc, }; @@ -1192,53 +1121,52 @@ static const struct clksel gfx_l3_clksel[] = { /* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ static struct clk gfx_l3_ck = { .name = "gfx_l3_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &l3_ick, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .recalc = &followparent_recalc, }; static struct clk gfx_l3_fck = { .name = "gfx_l3_fck", + .ops = &clkops_null, .parent = &gfx_l3_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), .clksel_mask = OMAP_CLKSEL_GFX_MASK, .clksel = gfx_l3_clksel, - .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gfx_l3_ick = { .name = "gfx_l3_ick", + .ops = &clkops_null, .parent = &gfx_l3_ck, - .flags = CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; static struct clk gfx_cg1_ck = { .name = "gfx_cg1_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &gfx_l3_fck, /* REVISIT: correct? */ .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_2D_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; static struct clk gfx_cg2_ck = { .name = "gfx_cg2_ck", + .ops = &clkops_omap2_dflt_wait, .parent = &gfx_l3_fck, /* REVISIT: correct? */ .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_3D_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -1265,24 +1193,24 @@ static const struct clksel sgx_clksel[] = { static struct clk sgx_fck = { .name = "sgx_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, + .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, .clksel = sgx_clksel, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "sgx_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk sgx_ick = { .name = "sgx_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l3_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, + .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, .clkdm_name = "sgx_clkdm", .recalc = &followparent_recalc, }; @@ -1291,11 +1219,11 @@ static struct clk sgx_ick = { static struct clk d2d_26m_fck = { .name = "d2d_26m_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "d2d_clkdm", .recalc = &followparent_recalc, }; @@ -1308,6 +1236,7 @@ static const struct clksel omap343x_gpt_clksel[] = { static struct clk gpt10_fck = { .name = "gpt10_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1315,13 +1244,13 @@ static struct clk gpt10_fck = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt11_fck = { .name = "gpt11_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1329,35 +1258,34 @@ static struct clk gpt11_fck = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk cpefuse_fck = { .name = "cpefuse_fck", + .ops = &clkops_omap2_dflt, .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &followparent_recalc, }; static struct clk ts_fck = { .name = "ts_fck", + .ops = &clkops_omap2_dflt, .parent = &omap_32k_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_TS_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &followparent_recalc, }; static struct clk usbtll_fck = { .name = "usbtll_fck", - .parent = &omap_120m_fck, + .ops = &clkops_omap2_dflt, + .parent = &dpll5_m2_ck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &followparent_recalc, }; @@ -1365,84 +1293,83 @@ static struct clk usbtll_fck = { static struct clk core_96m_fck = { .name = "core_96m_fck", + .ops = &clkops_null, .parent = &omap_96m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mmchs3_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mmchs2_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mspro_fck = { .name = "mspro_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mmchs1_fck = { .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c3_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c2_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c1_fck = { .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1469,6 +1396,7 @@ static const struct clksel mcbsp_15_clksel[] = { static struct clk mcbsp5_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 5, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1476,13 +1404,13 @@ static struct clk mcbsp5_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, .clksel = mcbsp_15_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp1_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), @@ -1490,7 +1418,6 @@ static struct clk mcbsp1_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, .clksel = mcbsp_15_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1499,77 +1426,76 @@ static struct clk mcbsp1_fck = { static struct clk core_48m_fck = { .name = "core_48m_fck", + .ops = &clkops_null, .parent = &omap_48m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mcspi4_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk mcspi3_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk mcspi2_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk mcspi1_fck = { .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk uart2_fck = { .name = "uart2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk uart1_fck = { .name = "uart1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk fshostusb_fck = { .name = "fshostusb_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_48m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .recalc = &followparent_recalc, }; @@ -1577,19 +1503,18 @@ static struct clk fshostusb_fck = { static struct clk core_12m_fck = { .name = "core_12m_fck", + .ops = &clkops_null, .parent = &omap_12m_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk hdq_fck = { .name = "hdq_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &core_12m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1612,22 +1537,22 @@ static const struct clksel ssi_ssr_clksel[] = { static struct clk ssi_ssr_fck = { .name = "ssi_ssr_fck", + .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, .clksel = ssi_ssr_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk ssi_sst_fck = { .name = "ssi_sst_fck", + .ops = &clkops_null, .parent = &ssi_ssr_fck, .fixed_div = 2, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1641,39 +1566,39 @@ static struct clk ssi_sst_fck = { */ static struct clk core_l3_ick = { .name = "core_l3_ick", + .ops = &clkops_null, .parent = &l3_ick, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; static struct clk hsotgusb_ick = { .name = "hsotgusb_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; static struct clk sdrc_ick = { .name = "sdrc_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SDRC_SHIFT, - .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; static struct clk gpmc_fck = { .name = "gpmc_fck", + .ops = &clkops_null, .parent = &core_l3_ick, - .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK | - ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, /* huh? */ .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1682,18 +1607,17 @@ static struct clk gpmc_fck = { static struct clk security_l3_ick = { .name = "security_l3_ick", + .ops = &clkops_null, .parent = &l3_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &followparent_recalc, }; static struct clk pka_ick = { .name = "pka_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_PKA_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; @@ -1701,31 +1625,30 @@ static struct clk pka_ick = { static struct clk core_l4_ick = { .name = "core_l4_ick", + .ops = &clkops_null, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk usbtll_ick = { .name = "usbtll_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mmchs3_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1733,250 +1656,251 @@ static struct clk mmchs3_ick = { /* Intersystem Communication Registers - chassis mode only */ static struct clk icr_ick = { .name = "icr_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_ICR_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk aes2_ick = { .name = "aes2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_AES2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk sha12_ick = { .name = "sha12_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SHA12_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk des2_ick = { .name = "des2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_DES2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mmchs2_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mmchs1_ick = { .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mspro_ick = { .name = "mspro_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk hdq_ick = { .name = "hdq_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mcspi4_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mcspi3_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mcspi2_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mcspi1_ick = { .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c3_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c2_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c1_ick = { .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk uart2_ick = { .name = "uart2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk uart1_ick = { .name = "uart1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt11_ick = { .name = "gpt11_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt10_ick = { .name = "gpt10_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mcbsp5_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 5, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mcbsp1_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 1, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk fac_ick = { .name = "fac_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk mailboxes_ick = { .name = "mailboxes_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk omapctrl_ick = { .name = "omapctrl_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &core_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, - .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .flags = ENABLE_ON_INIT, .recalc = &followparent_recalc, }; @@ -1984,19 +1908,18 @@ static struct clk omapctrl_ick = { static struct clk ssi_l4_ick = { .name = "ssi_l4_ick", + .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk ssi_ick = { .name = "ssi_ick", + .ops = &clkops_omap2_dflt, .parent = &ssi_l4_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -2011,6 +1934,7 @@ static const struct clksel usb_l4_clksel[] = { static struct clk usb_l4_ick = { .name = "usb_l4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ick, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), @@ -2018,7 +1942,6 @@ static struct clk usb_l4_ick = { .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, .clksel = usb_l4_clksel, - .flags = CLOCK_IN_OMAP3430ES1, .recalc = &omap2_clksel_recalc, }; @@ -2028,98 +1951,87 @@ static struct clk usb_l4_ick = { static struct clk security_l4_ick2 = { .name = "security_l4_ick2", + .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .recalc = &followparent_recalc, }; static struct clk aes1_ick = { .name = "aes1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_AES1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk rng_ick = { .name = "rng_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_RNG_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk sha11_ick = { .name = "sha11_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_SHA11_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; static struct clk des1_ick = { .name = "des1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &security_l4_ick2, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP3430_EN_DES1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .recalc = &followparent_recalc, }; /* DSS */ -static const struct clksel dss1_alwon_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - static struct clk dss1_alwon_fck = { .name = "dss1_alwon_fck", + .ops = &clkops_omap2_dflt, .parent = &dpll4_m4x2_ck, - .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .clksel = dss1_alwon_fck_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", - .recalc = &omap2_clksel_recalc, + .recalc = &followparent_recalc, }; static struct clk dss_tv_fck = { .name = "dss_tv_fck", + .ops = &clkops_omap2_dflt, .parent = &omap_54m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; static struct clk dss_96m_fck = { .name = "dss_96m_fck", + .ops = &clkops_omap2_dflt, .parent = &omap_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; static struct clk dss2_alwon_fck = { .name = "dss2_alwon_fck", + .ops = &clkops_omap2_dflt, .parent = &sys_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_DSS2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; @@ -2127,45 +2039,46 @@ static struct clk dss2_alwon_fck = { static struct clk dss_ick = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; /* CAM */ -static const struct clksel cam_mclk_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates }, - { .parent = NULL } -}; - static struct clk cam_mclk = { .name = "cam_mclk", + .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m5x2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .clksel = cam_mclk_clksel, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "cam_clkdm", - .recalc = &omap2_clksel_recalc, + .recalc = &followparent_recalc, }; static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk csi2_96m_fck = { + .name = "csi2_96m_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CSI2_SHIFT, .clkdm_name = "cam_clkdm", .recalc = &followparent_recalc, }; @@ -2174,22 +2087,22 @@ static struct clk cam_ick = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", - .parent = &omap_120m_fck, + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll5_m2_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2197,22 +2110,11 @@ static struct clk usbhost_48m_fck = { static struct clk usbhost_ick = { /* Handles both L3 and L4 clocks */ .name = "usbhost_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_sar_fck = { - .name = "usbhost_sar_fck", - .parent = &osc_sys_ck, - .init = &omap2_init_clk_clkdm, - .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), - .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2237,7 +2139,7 @@ static const struct clksel_rate usim_120m_rates[] = { static const struct clksel usim_clksel[] = { { .parent = &omap_96m_fck, .rates = usim_96m_rates }, - { .parent = &omap_120m_fck, .rates = usim_120m_rates }, + { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, { .parent = &sys_ck, .rates = div2_rates }, { .parent = NULL }, }; @@ -2245,63 +2147,63 @@ static const struct clksel usim_clksel[] = { /* 3430ES2 only */ static struct clk usim_fck = { .name = "usim_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, .clksel = usim_clksel, - .flags = CLOCK_IN_OMAP3430ES2, .recalc = &omap2_clksel_recalc, }; /* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ static struct clk gpt1_fck = { .name = "gpt1_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT1_SHIFT, .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk wkup_32k_fck = { .name = "wkup_32k_fck", + .ops = &clkops_null, .init = &omap2_init_clk_clkdm, .parent = &omap_32k_fck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio1_dbck = { .name = "gpio1_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk wdt2_fck = { .name = "wdt2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk wkup_l4_ick = { .name = "wkup_l4_ick", + .ops = &clkops_null, .parent = &sys_ck, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2310,50 +2212,50 @@ static struct clk wkup_l4_ick = { /* Never specifically named in the TRM, so we have to infer a likely name */ static struct clk usim_ick = { .name = "usim_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk wdt2_ick = { .name = "wdt2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk wdt1_ick = { .name = "wdt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio1_ick = { .name = "gpio1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk omap_32ksync_ick = { .name = "omap_32ksync_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2361,20 +2263,20 @@ static struct clk omap_32ksync_ick = { /* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_ick = { .name = "gpt12_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT12_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt1_ick = { .name = "gpt1_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2385,406 +2287,404 @@ static struct clk gpt1_ick = { static struct clk per_96m_fck = { .name = "per_96m_fck", + .ops = &clkops_null, .parent = &omap_96m_alwon_fck, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk per_48m_fck = { .name = "per_48m_fck", + .ops = &clkops_null, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk uart3_fck = { .name = "uart3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_48m_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt2_fck = { .name = "gpt2_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT2_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt3_fck = { .name = "gpt3_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT3_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt4_fck = { .name = "gpt4_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT4_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt5_fck = { .name = "gpt5_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT5_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt6_fck = { .name = "gpt6_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT6_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt7_fck = { .name = "gpt7_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT7_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt8_fck = { .name = "gpt8_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT8_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gpt9_fck = { .name = "gpt9_fck", + .ops = &clkops_omap2_dflt_wait, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPT9_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, .clksel = omap343x_gpt_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk per_32k_alwon_fck = { .name = "per_32k_alwon_fck", + .ops = &clkops_null, .parent = &omap_32k_fck, .clkdm_name = "per_clkdm", - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; static struct clk gpio6_dbck = { .name = "gpio6_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio5_dbck = { .name = "gpio5_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio4_dbck = { .name = "gpio4_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio3_dbck = { .name = "gpio3_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio2_dbck = { .name = "gpio2_dbck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk wdt3_fck = { .name = "wdt3_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk per_l4_ick = { .name = "per_l4_ick", + .ops = &clkops_null, .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio6_ick = { .name = "gpio6_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio5_ick = { .name = "gpio5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio4_ick = { .name = "gpio4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio3_ick = { .name = "gpio3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpio2_ick = { .name = "gpio2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk wdt3_ick = { .name = "wdt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk uart3_ick = { .name = "uart3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt9_ick = { .name = "gpt9_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt8_ick = { .name = "gpt8_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt7_ick = { .name = "gpt7_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt6_ick = { .name = "gpt6_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt5_ick = { .name = "gpt5_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt4_ick = { .name = "gpt4_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt3_ick = { .name = "gpt3_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk gpt2_ick = { .name = "gpt2_ick", + .ops = &clkops_omap2_dflt_wait, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk mcbsp2_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 2, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk mcbsp3_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 3, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk mcbsp4_ick = { .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, .id = 4, .parent = &per_l4_ick, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static const struct clksel mcbsp_234_clksel[] = { - { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, { .parent = NULL } }; static struct clk mcbsp2_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 2, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), @@ -2792,13 +2692,13 @@ static struct clk mcbsp2_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, .clksel = mcbsp_234_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp3_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 3, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), @@ -2806,13 +2706,13 @@ static struct clk mcbsp3_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, .clksel = mcbsp_234_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp4_fck = { .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, .id = 4, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), @@ -2820,7 +2720,6 @@ static struct clk mcbsp4_fck = { .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, .clksel = mcbsp_234_clksel, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2864,11 +2763,11 @@ static const struct clksel emu_src_clksel[] = { */ static struct clk emu_src_ck = { .name = "emu_src_ck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2888,11 +2787,11 @@ static const struct clksel pclk_emu_clksel[] = { static struct clk pclk_fck = { .name = "pclk_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, .clksel = pclk_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2911,11 +2810,11 @@ static const struct clksel pclkx2_emu_clksel[] = { static struct clk pclkx2_fck = { .name = "pclkx2_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, .clksel = pclkx2_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2927,22 +2826,22 @@ static const struct clksel atclk_emu_clksel[] = { static struct clk atclk_fck = { .name = "atclk_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, .clksel = atclk_emu_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk traceclk_src_fck = { .name = "traceclk_src_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, .clksel = emu_src_clksel, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2961,11 +2860,11 @@ static const struct clksel traceclk_clksel[] = { static struct clk traceclk_fck = { .name = "traceclk_fck", + .ops = &clkops_null, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, .clksel = traceclk_clksel, - .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2975,27 +2874,27 @@ static struct clk traceclk_fck = { /* SmartReflex fclk (VDD1) */ static struct clk sr1_fck = { .name = "sr1_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR1_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; /* SmartReflex fclk (VDD2) */ static struct clk sr2_fck = { .name = "sr2_fck", + .ops = &clkops_omap2_dflt_wait, .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR2_SHIFT, - .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, .recalc = &followparent_recalc, }; static struct clk sr_l4_ick = { .name = "sr_l4_ick", + .ops = &clkops_null, /* RMK: missing? */ .parent = &l4_ick, - .flags = CLOCK_IN_OMAP343X, .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -3005,231 +2904,16 @@ static struct clk sr_l4_ick = { /* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", + .ops = &clkops_null, .parent = &secure_32k_fck, - .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; static struct clk wdt1_fck = { .name = "wdt1_fck", + .ops = &clkops_null, .parent = &secure_32k_fck, - .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk *onchip_34xx_clks[] __initdata = { - &omap_32k_fck, - &virt_12m_ck, - &virt_13m_ck, - &virt_16_8m_ck, - &virt_19_2m_ck, - &virt_26m_ck, - &virt_38_4m_ck, - &osc_sys_ck, - &sys_ck, - &sys_altclk, - &mcbsp_clks, - &sys_clkout1, - &dpll1_ck, - &dpll1_x2_ck, - &dpll1_x2m2_ck, - &dpll2_ck, - &dpll2_m2_ck, - &dpll3_ck, - &core_ck, - &dpll3_x2_ck, - &dpll3_m2_ck, - &dpll3_m2x2_ck, - &dpll3_m3_ck, - &dpll3_m3x2_ck, - &emu_core_alwon_ck, - &dpll4_ck, - &dpll4_x2_ck, - &omap_96m_alwon_fck, - &omap_96m_fck, - &cm_96m_fck, - &virt_omap_54m_fck, - &omap_54m_fck, - &omap_48m_fck, - &omap_12m_fck, - &dpll4_m2_ck, - &dpll4_m2x2_ck, - &dpll4_m3_ck, - &dpll4_m3x2_ck, - &dpll4_m4_ck, - &dpll4_m4x2_ck, - &dpll4_m5_ck, - &dpll4_m5x2_ck, - &dpll4_m6_ck, - &dpll4_m6x2_ck, - &emu_per_alwon_ck, - &dpll5_ck, - &dpll5_m2_ck, - &omap_120m_fck, - &clkout2_src_ck, - &sys_clkout2, - &corex2_fck, - &dpll1_fck, - &mpu_ck, - &arm_fck, - &emu_mpu_alwon_ck, - &dpll2_fck, - &iva2_ck, - &l3_ick, - &l4_ick, - &rm_ick, - &gfx_l3_ck, - &gfx_l3_fck, - &gfx_l3_ick, - &gfx_cg1_ck, - &gfx_cg2_ck, - &sgx_fck, - &sgx_ick, - &d2d_26m_fck, - &gpt10_fck, - &gpt11_fck, - &cpefuse_fck, - &ts_fck, - &usbtll_fck, - &core_96m_fck, - &mmchs3_fck, - &mmchs2_fck, - &mspro_fck, - &mmchs1_fck, - &i2c3_fck, - &i2c2_fck, - &i2c1_fck, - &mcbsp5_fck, - &mcbsp1_fck, - &core_48m_fck, - &mcspi4_fck, - &mcspi3_fck, - &mcspi2_fck, - &mcspi1_fck, - &uart2_fck, - &uart1_fck, - &fshostusb_fck, - &core_12m_fck, - &hdq_fck, - &ssi_ssr_fck, - &ssi_sst_fck, - &core_l3_ick, - &hsotgusb_ick, - &sdrc_ick, - &gpmc_fck, - &security_l3_ick, - &pka_ick, - &core_l4_ick, - &usbtll_ick, - &mmchs3_ick, - &icr_ick, - &aes2_ick, - &sha12_ick, - &des2_ick, - &mmchs2_ick, - &mmchs1_ick, - &mspro_ick, - &hdq_ick, - &mcspi4_ick, - &mcspi3_ick, - &mcspi2_ick, - &mcspi1_ick, - &i2c3_ick, - &i2c2_ick, - &i2c1_ick, - &uart2_ick, - &uart1_ick, - &gpt11_ick, - &gpt10_ick, - &mcbsp5_ick, - &mcbsp1_ick, - &fac_ick, - &mailboxes_ick, - &omapctrl_ick, - &ssi_l4_ick, - &ssi_ick, - &usb_l4_ick, - &security_l4_ick2, - &aes1_ick, - &rng_ick, - &sha11_ick, - &des1_ick, - &dss1_alwon_fck, - &dss_tv_fck, - &dss_96m_fck, - &dss2_alwon_fck, - &dss_ick, - &cam_mclk, - &cam_ick, - &usbhost_120m_fck, - &usbhost_48m_fck, - &usbhost_ick, - &usbhost_sar_fck, - &usim_fck, - &gpt1_fck, - &wkup_32k_fck, - &gpio1_dbck, - &wdt2_fck, - &wkup_l4_ick, - &usim_ick, - &wdt2_ick, - &wdt1_ick, - &gpio1_ick, - &omap_32ksync_ick, - &gpt12_ick, - &gpt1_ick, - &per_96m_fck, - &per_48m_fck, - &uart3_fck, - &gpt2_fck, - &gpt3_fck, - &gpt4_fck, - &gpt5_fck, - &gpt6_fck, - &gpt7_fck, - &gpt8_fck, - &gpt9_fck, - &per_32k_alwon_fck, - &gpio6_dbck, - &gpio5_dbck, - &gpio4_dbck, - &gpio3_dbck, - &gpio2_dbck, - &wdt3_fck, - &per_l4_ick, - &gpio6_ick, - &gpio5_ick, - &gpio4_ick, - &gpio3_ick, - &gpio2_ick, - &wdt3_ick, - &uart3_ick, - &gpt9_ick, - &gpt8_ick, - &gpt7_ick, - &gpt6_ick, - &gpt5_ick, - &gpt4_ick, - &gpt3_ick, - &gpt2_ick, - &mcbsp2_ick, - &mcbsp3_ick, - &mcbsp4_ick, - &mcbsp2_fck, - &mcbsp3_fck, - &mcbsp4_fck, - &emu_src_ck, - &pclk_fck, - &pclkx2_fck, - &atclk_fck, - &traceclk_src_fck, - &traceclk_fck, - &sr1_fck, - &sr2_fck, - &sr_l4_ick, - &secure_32k_fck, - &gpt12_fck, - &wdt1_fck, + .recalc = &followparent_recalc, }; #endif diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 4c3ce9cfd94..0e7d501865b 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/limits.h> +#include <linux/err.h> #include <linux/io.h> @@ -71,16 +72,13 @@ static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep) if (!omap_chip_is(autodep->omap_chip)) return; - pwrdm = pwrdm_lookup(autodep->pwrdm_name); + pwrdm = pwrdm_lookup(autodep->pwrdm.name); if (!pwrdm) { - pr_debug("clockdomain: _autodep_lookup: powerdomain %s " - "does not exist\n", autodep->pwrdm_name); - WARN_ON(1); - return; + pr_err("clockdomain: autodeps: powerdomain %s does not exist\n", + autodep->pwrdm.name); + pwrdm = ERR_PTR(-ENOENT); } - autodep->pwrdm = pwrdm; - - return; + autodep->pwrdm.ptr = pwrdm; } /* @@ -95,16 +93,19 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm) { struct clkdm_pwrdm_autodep *autodep; - for (autodep = autodeps; autodep->pwrdm_name; autodep++) { - if (!autodep->pwrdm) + for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) { + if (IS_ERR(autodep->pwrdm.ptr)) + continue; + + if (!omap_chip_is(autodep->omap_chip)) continue; pr_debug("clockdomain: adding %s sleepdep/wkdep for " - "pwrdm %s\n", autodep->pwrdm_name, - clkdm->pwrdm->name); + "pwrdm %s\n", autodep->pwrdm.ptr->name, + clkdm->pwrdm.ptr->name); - pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm); - pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); + pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); } } @@ -120,16 +121,19 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm) { struct clkdm_pwrdm_autodep *autodep; - for (autodep = autodeps; autodep->pwrdm_name; autodep++) { - if (!autodep->pwrdm) + for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) { + if (IS_ERR(autodep->pwrdm.ptr)) + continue; + + if (!omap_chip_is(autodep->omap_chip)) continue; pr_debug("clockdomain: removing %s sleepdep/wkdep for " - "pwrdm %s\n", autodep->pwrdm_name, - clkdm->pwrdm->name); + "pwrdm %s\n", autodep->pwrdm.ptr->name, + clkdm->pwrdm.ptr->name); - pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm); - pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); + pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr); } } @@ -179,7 +183,7 @@ void clkdm_init(struct clockdomain **clkdms, autodeps = init_autodeps; if (autodeps) - for (autodep = autodeps; autodep->pwrdm_name; autodep++) + for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) _autodep_lookup(autodep); } @@ -202,20 +206,20 @@ int clkdm_register(struct clockdomain *clkdm) if (!omap_chip_is(clkdm->omap_chip)) return -EINVAL; - pwrdm = pwrdm_lookup(clkdm->pwrdm_name); + pwrdm = pwrdm_lookup(clkdm->pwrdm.name); if (!pwrdm) { - pr_debug("clockdomain: clkdm_register %s: powerdomain %s " - "does not exist\n", clkdm->name, clkdm->pwrdm_name); + pr_err("clockdomain: %s: powerdomain %s does not exist\n", + clkdm->name, clkdm->pwrdm.name); return -EINVAL; } - clkdm->pwrdm = pwrdm; + clkdm->pwrdm.ptr = pwrdm; mutex_lock(&clkdm_mutex); /* Verify that the clockdomain is not already registered */ if (_clkdm_lookup(clkdm->name)) { ret = -EEXIST; goto cr_unlock; - }; + } list_add(&clkdm->node, &clkdm_list); @@ -242,7 +246,7 @@ int clkdm_unregister(struct clockdomain *clkdm) if (!clkdm) return -EINVAL; - pwrdm_del_clkdm(clkdm->pwrdm, clkdm); + pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm); mutex_lock(&clkdm_mutex); list_del(&clkdm->node); @@ -327,7 +331,7 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm) if (!clkdm) return NULL; - return clkdm->pwrdm; + return clkdm->pwrdm.ptr; } @@ -348,7 +352,7 @@ static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm) if (!clkdm) return -EINVAL; - v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); v &= clkdm->clktrctrl_mask; v >>= __ffs(clkdm->clktrctrl_mask); @@ -380,7 +384,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) if (cpu_is_omap24xx()) { cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, - clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL); } else if (cpu_is_omap34xx()) { @@ -388,7 +392,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) __ffs(clkdm->clktrctrl_mask)); cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, - clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); } else { BUG(); @@ -422,7 +426,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) if (cpu_is_omap24xx()) { cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, - clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL); } else if (cpu_is_omap34xx()) { @@ -430,7 +434,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) __ffs(clkdm->clktrctrl_mask)); cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, - clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); } else { BUG(); @@ -478,7 +482,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v << __ffs(clkdm->clktrctrl_mask), - clkdm->pwrdm->prcm_offs, + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); } @@ -516,7 +520,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v << __ffs(clkdm->clktrctrl_mask), - clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); if (atomic_read(&clkdm->usecount) > 0) _clkdm_del_autodeps(clkdm); @@ -567,6 +571,8 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) else omap2_clkdm_wakeup(clkdm); + pwrdm_wait_transition(clkdm->pwrdm.ptr); + return 0; } diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index cd86dcc7b42..281d5da1918 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -14,12 +14,29 @@ /* * OMAP2/3-common clockdomains + * + * Even though the 2420 has a single PRCM module from the + * interconnect's perspective, internally it does appear to have + * separate PRM and CM clockdomains. The usual test case is + * sys_clkout/sys_clkout2. */ /* This is an implicit clockdomain - it is never defined as such in TRM */ static struct clockdomain wkup_clkdm = { .name = "wkup_clkdm", - .pwrdm_name = "wkup_pwrdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), +}; + +static struct clockdomain prm_clkdm = { + .name = "prm_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), +}; + +static struct clockdomain cm_clkdm = { + .name = "cm_clkdm", + .pwrdm = { .name = "core_pwrdm" }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), }; @@ -31,7 +48,7 @@ static struct clockdomain wkup_clkdm = { static struct clockdomain mpu_2420_clkdm = { .name = "mpu_clkdm", - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), @@ -39,7 +56,7 @@ static struct clockdomain mpu_2420_clkdm = { static struct clockdomain iva1_2420_clkdm = { .name = "iva1_clkdm", - .pwrdm_name = "dsp_pwrdm", + .pwrdm = { .name = "dsp_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), @@ -56,7 +73,7 @@ static struct clockdomain iva1_2420_clkdm = { static struct clockdomain mpu_2430_clkdm = { .name = "mpu_clkdm", - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), @@ -64,7 +81,7 @@ static struct clockdomain mpu_2430_clkdm = { static struct clockdomain mdm_clkdm = { .name = "mdm_clkdm", - .pwrdm_name = "mdm_pwrdm", + .pwrdm = { .name = "mdm_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), @@ -81,7 +98,7 @@ static struct clockdomain mdm_clkdm = { static struct clockdomain dsp_clkdm = { .name = "dsp_clkdm", - .pwrdm_name = "dsp_pwrdm", + .pwrdm = { .name = "dsp_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -89,7 +106,7 @@ static struct clockdomain dsp_clkdm = { static struct clockdomain gfx_24xx_clkdm = { .name = "gfx_clkdm", - .pwrdm_name = "gfx_pwrdm", + .pwrdm = { .name = "gfx_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -97,7 +114,7 @@ static struct clockdomain gfx_24xx_clkdm = { static struct clockdomain core_l3_24xx_clkdm = { .name = "core_l3_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -105,7 +122,7 @@ static struct clockdomain core_l3_24xx_clkdm = { static struct clockdomain core_l4_24xx_clkdm = { .name = "core_l4_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -113,7 +130,7 @@ static struct clockdomain core_l4_24xx_clkdm = { static struct clockdomain dss_24xx_clkdm = { .name = "dss_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), @@ -130,7 +147,7 @@ static struct clockdomain dss_24xx_clkdm = { static struct clockdomain mpu_34xx_clkdm = { .name = "mpu_clkdm", - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -138,7 +155,7 @@ static struct clockdomain mpu_34xx_clkdm = { static struct clockdomain neon_clkdm = { .name = "neon_clkdm", - .pwrdm_name = "neon_pwrdm", + .pwrdm = { .name = "neon_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -146,7 +163,7 @@ static struct clockdomain neon_clkdm = { static struct clockdomain iva2_clkdm = { .name = "iva2_clkdm", - .pwrdm_name = "iva2_pwrdm", + .pwrdm = { .name = "iva2_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -154,7 +171,7 @@ static struct clockdomain iva2_clkdm = { static struct clockdomain gfx_3430es1_clkdm = { .name = "gfx_clkdm", - .pwrdm_name = "gfx_pwrdm", + .pwrdm = { .name = "gfx_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), @@ -162,10 +179,10 @@ static struct clockdomain gfx_3430es1_clkdm = { static struct clockdomain sgx_clkdm = { .name = "sgx_clkdm", - .pwrdm_name = "sgx_pwrdm", + .pwrdm = { .name = "sgx_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), }; /* @@ -177,7 +194,7 @@ static struct clockdomain sgx_clkdm = { */ static struct clockdomain d2d_clkdm = { .name = "d2d_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -185,7 +202,7 @@ static struct clockdomain d2d_clkdm = { static struct clockdomain core_l3_34xx_clkdm = { .name = "core_l3_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -193,7 +210,7 @@ static struct clockdomain core_l3_34xx_clkdm = { static struct clockdomain core_l4_34xx_clkdm = { .name = "core_l4_clkdm", - .pwrdm_name = "core_pwrdm", + .pwrdm = { .name = "core_pwrdm" }, .flags = CLKDM_CAN_HWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -201,7 +218,7 @@ static struct clockdomain core_l4_34xx_clkdm = { static struct clockdomain dss_34xx_clkdm = { .name = "dss_clkdm", - .pwrdm_name = "dss_pwrdm", + .pwrdm = { .name = "dss_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -209,7 +226,7 @@ static struct clockdomain dss_34xx_clkdm = { static struct clockdomain cam_clkdm = { .name = "cam_clkdm", - .pwrdm_name = "cam_pwrdm", + .pwrdm = { .name = "cam_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), @@ -217,28 +234,62 @@ static struct clockdomain cam_clkdm = { static struct clockdomain usbhost_clkdm = { .name = "usbhost_clkdm", - .pwrdm_name = "usbhost_pwrdm", + .pwrdm = { .name = "usbhost_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), }; static struct clockdomain per_clkdm = { .name = "per_clkdm", - .pwrdm_name = "per_pwrdm", + .pwrdm = { .name = "per_pwrdm" }, .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +/* + * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is + * switched of even if sdti is in use + */ static struct clockdomain emu_clkdm = { .name = "emu_clkdm", - .pwrdm_name = "emu_pwrdm", - .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP, + .pwrdm = { .name = "emu_pwrdm" }, + .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +static struct clockdomain dpll1_clkdm = { + .name = "dpll1_clkdm", + .pwrdm = { .name = "dpll1_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll2_clkdm = { + .name = "dpll2_clkdm", + .pwrdm = { .name = "dpll2_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll3_clkdm = { + .name = "dpll3_clkdm", + .pwrdm = { .name = "dpll3_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll4_clkdm = { + .name = "dpll4_clkdm", + .pwrdm = { .name = "dpll4_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dpll5_clkdm = { + .name = "dpll5_clkdm", + .pwrdm = { .name = "dpll5_pwrdm" }, + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), +}; + #endif /* CONFIG_ARCH_OMAP34XX */ /* @@ -247,14 +298,16 @@ static struct clockdomain emu_clkdm = { static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = { { - .pwrdm_name = "mpu_pwrdm", + .pwrdm = { .name = "mpu_pwrdm" }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }, { - .pwrdm_name = "iva2_pwrdm", + .pwrdm = { .name = "iva2_pwrdm" }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }, - { NULL } + { + .pwrdm = { .name = NULL }, + } }; /* @@ -264,6 +317,8 @@ static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = { static struct clockdomain *clockdomains_omap[] = { &wkup_clkdm, + &cm_clkdm, + &prm_clkdm, #ifdef CONFIG_ARCH_OMAP2420 &mpu_2420_clkdm, @@ -297,6 +352,11 @@ static struct clockdomain *clockdomains_omap[] = { &usbhost_clkdm, &per_clkdm, &emu_clkdm, + &dpll1_clkdm, + &dpll2_clkdm, + &dpll3_clkdm, + &dpll4_clkdm, + &dpll5_clkdm, #endif NULL, diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 1098ecfab86..297a2fe634e 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -110,35 +110,56 @@ #define OMAP24XX_EN_DES (1 << 0) /* CM_IDLEST1_CORE specific bits */ -#define OMAP24XX_ST_MAILBOXES (1 << 30) -#define OMAP24XX_ST_WDT4 (1 << 29) -#define OMAP2420_ST_WDT3 (1 << 28) -#define OMAP24XX_ST_MSPRO (1 << 27) -#define OMAP24XX_ST_FAC (1 << 25) -#define OMAP2420_ST_EAC (1 << 24) -#define OMAP24XX_ST_HDQ (1 << 23) -#define OMAP24XX_ST_I2C2 (1 << 20) -#define OMAP24XX_ST_I2C1 (1 << 19) -#define OMAP24XX_ST_MCBSP2 (1 << 16) -#define OMAP24XX_ST_MCBSP1 (1 << 15) -#define OMAP24XX_ST_DSS (1 << 0) +#define OMAP24XX_ST_MAILBOXES_SHIFT 30 +#define OMAP24XX_ST_MAILBOXES_MASK (1 << 30) +#define OMAP24XX_ST_WDT4_SHIFT 29 +#define OMAP24XX_ST_WDT4_MASK (1 << 29) +#define OMAP2420_ST_WDT3_SHIFT 28 +#define OMAP2420_ST_WDT3_MASK (1 << 28) +#define OMAP24XX_ST_MSPRO_SHIFT 27 +#define OMAP24XX_ST_MSPRO_MASK (1 << 27) +#define OMAP24XX_ST_FAC_SHIFT 25 +#define OMAP24XX_ST_FAC_MASK (1 << 25) +#define OMAP2420_ST_EAC_SHIFT 24 +#define OMAP2420_ST_EAC_MASK (1 << 24) +#define OMAP24XX_ST_HDQ_SHIFT 23 +#define OMAP24XX_ST_HDQ_MASK (1 << 23) +#define OMAP2420_ST_I2C2_SHIFT 20 +#define OMAP2420_ST_I2C2_MASK (1 << 20) +#define OMAP2420_ST_I2C1_SHIFT 19 +#define OMAP2420_ST_I2C1_MASK (1 << 19) +#define OMAP24XX_ST_MCBSP2_SHIFT 16 +#define OMAP24XX_ST_MCBSP2_MASK (1 << 16) +#define OMAP24XX_ST_MCBSP1_SHIFT 15 +#define OMAP24XX_ST_MCBSP1_MASK (1 << 15) +#define OMAP24XX_ST_DSS_SHIFT 0 +#define OMAP24XX_ST_DSS_MASK (1 << 0) /* CM_IDLEST2_CORE */ -#define OMAP2430_ST_MCBSP5 (1 << 5) -#define OMAP2430_ST_MCBSP4 (1 << 4) -#define OMAP2430_ST_MCBSP3 (1 << 3) -#define OMAP24XX_ST_SSI (1 << 1) +#define OMAP2430_ST_MCBSP5_SHIFT 5 +#define OMAP2430_ST_MCBSP5_MASK (1 << 5) +#define OMAP2430_ST_MCBSP4_SHIFT 4 +#define OMAP2430_ST_MCBSP4_MASK (1 << 4) +#define OMAP2430_ST_MCBSP3_SHIFT 3 +#define OMAP2430_ST_MCBSP3_MASK (1 << 3) +#define OMAP24XX_ST_SSI_SHIFT 1 +#define OMAP24XX_ST_SSI_MASK (1 << 1) /* CM_IDLEST3_CORE */ /* 2430 only */ -#define OMAP2430_ST_SDRC (1 << 2) +#define OMAP2430_ST_SDRC_MASK (1 << 2) /* CM_IDLEST4_CORE */ -#define OMAP24XX_ST_PKA (1 << 4) -#define OMAP24XX_ST_AES (1 << 3) -#define OMAP24XX_ST_RNG (1 << 2) -#define OMAP24XX_ST_SHA (1 << 1) -#define OMAP24XX_ST_DES (1 << 0) +#define OMAP24XX_ST_PKA_SHIFT 4 +#define OMAP24XX_ST_PKA_MASK (1 << 4) +#define OMAP24XX_ST_AES_SHIFT 3 +#define OMAP24XX_ST_AES_MASK (1 << 3) +#define OMAP24XX_ST_RNG_SHIFT 2 +#define OMAP24XX_ST_RNG_MASK (1 << 2) +#define OMAP24XX_ST_SHA_SHIFT 1 +#define OMAP24XX_ST_SHA_MASK (1 << 1) +#define OMAP24XX_ST_DES_SHIFT 0 +#define OMAP24XX_ST_DES_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ #define OMAP24XX_AUTO_CAM (1 << 31) @@ -275,11 +296,16 @@ #define OMAP24XX_EN_32KSYNC (1 << 1) /* CM_IDLEST_WKUP specific bits */ -#define OMAP2430_ST_ICR (1 << 6) -#define OMAP24XX_ST_OMAPCTRL (1 << 5) -#define OMAP24XX_ST_WDT1 (1 << 4) -#define OMAP24XX_ST_MPU_WDT (1 << 3) -#define OMAP24XX_ST_32KSYNC (1 << 1) +#define OMAP2430_ST_ICR_SHIFT 6 +#define OMAP2430_ST_ICR_MASK (1 << 6) +#define OMAP24XX_ST_OMAPCTRL_SHIFT 5 +#define OMAP24XX_ST_OMAPCTRL_MASK (1 << 5) +#define OMAP24XX_ST_WDT1_SHIFT 4 +#define OMAP24XX_ST_WDT1_MASK (1 << 4) +#define OMAP24XX_ST_MPU_WDT_SHIFT 3 +#define OMAP24XX_ST_MPU_WDT_MASK (1 << 3) +#define OMAP24XX_ST_32KSYNC_SHIFT 1 +#define OMAP24XX_ST_32KSYNC_MASK (1 << 1) /* CM_AUTOIDLE_WKUP */ #define OMAP24XX_AUTO_OMAPCTRL (1 << 5) diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 219f5c8d965..6f3f5a36aae 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -183,31 +183,58 @@ #define OMAP3430ES2_EN_CPEFUSE_MASK (1 << 0) /* CM_IDLEST1_CORE specific bits */ -#define OMAP3430_ST_ICR (1 << 29) -#define OMAP3430_ST_AES2 (1 << 28) -#define OMAP3430_ST_SHA12 (1 << 27) -#define OMAP3430_ST_DES2 (1 << 26) -#define OMAP3430_ST_MSPRO (1 << 23) -#define OMAP3430_ST_HDQ (1 << 22) -#define OMAP3430ES1_ST_FAC (1 << 8) -#define OMAP3430ES1_ST_MAILBOXES (1 << 7) -#define OMAP3430_ST_OMAPCTRL (1 << 6) -#define OMAP3430_ST_SDMA (1 << 2) -#define OMAP3430_ST_SDRC (1 << 1) -#define OMAP3430_ST_SSI (1 << 0) +#define OMAP3430ES2_ST_MMC3_SHIFT 30 +#define OMAP3430ES2_ST_MMC3_MASK (1 << 30) +#define OMAP3430_ST_ICR_SHIFT 29 +#define OMAP3430_ST_ICR_MASK (1 << 29) +#define OMAP3430_ST_AES2_SHIFT 28 +#define OMAP3430_ST_AES2_MASK (1 << 28) +#define OMAP3430_ST_SHA12_SHIFT 27 +#define OMAP3430_ST_SHA12_MASK (1 << 27) +#define OMAP3430_ST_DES2_SHIFT 26 +#define OMAP3430_ST_DES2_MASK (1 << 26) +#define OMAP3430_ST_MSPRO_SHIFT 23 +#define OMAP3430_ST_MSPRO_MASK (1 << 23) +#define OMAP3430_ST_HDQ_SHIFT 22 +#define OMAP3430_ST_HDQ_MASK (1 << 22) +#define OMAP3430ES1_ST_FAC_SHIFT 8 +#define OMAP3430ES1_ST_FAC_MASK (1 << 8) +#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8 +#define OMAP3430ES2_ST_SSI_IDLE_MASK (1 << 8) +#define OMAP3430_ST_MAILBOXES_SHIFT 7 +#define OMAP3430_ST_MAILBOXES_MASK (1 << 7) +#define OMAP3430_ST_OMAPCTRL_SHIFT 6 +#define OMAP3430_ST_OMAPCTRL_MASK (1 << 6) +#define OMAP3430_ST_SDMA_SHIFT 2 +#define OMAP3430_ST_SDMA_MASK (1 << 2) +#define OMAP3430_ST_SDRC_SHIFT 1 +#define OMAP3430_ST_SDRC_MASK (1 << 1) +#define OMAP3430_ST_SSI_STDBY_SHIFT 0 +#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0) /* CM_IDLEST2_CORE */ -#define OMAP3430_ST_PKA (1 << 4) -#define OMAP3430_ST_AES1 (1 << 3) -#define OMAP3430_ST_RNG (1 << 2) -#define OMAP3430_ST_SHA11 (1 << 1) -#define OMAP3430_ST_DES1 (1 << 0) +#define OMAP3430_ST_PKA_SHIFT 4 +#define OMAP3430_ST_PKA_MASK (1 << 4) +#define OMAP3430_ST_AES1_SHIFT 3 +#define OMAP3430_ST_AES1_MASK (1 << 3) +#define OMAP3430_ST_RNG_SHIFT 2 +#define OMAP3430_ST_RNG_MASK (1 << 2) +#define OMAP3430_ST_SHA11_SHIFT 1 +#define OMAP3430_ST_SHA11_MASK (1 << 1) +#define OMAP3430_ST_DES1_SHIFT 0 +#define OMAP3430_ST_DES1_MASK (1 << 0) /* CM_IDLEST3_CORE */ #define OMAP3430ES2_ST_USBTLL_SHIFT 2 #define OMAP3430ES2_ST_USBTLL_MASK (1 << 2) +#define OMAP3430ES2_ST_CPEFUSE_SHIFT 0 +#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ +#define OMAP3430ES2_AUTO_MMC3 (1 << 30) +#define OMAP3430ES2_AUTO_MMC3_SHIFT 30 +#define OMAP3430ES2_AUTO_ICR (1 << 29) +#define OMAP3430ES2_AUTO_ICR_SHIFT 29 #define OMAP3430_AUTO_AES2 (1 << 28) #define OMAP3430_AUTO_AES2_SHIFT 28 #define OMAP3430_AUTO_SHA12 (1 << 27) @@ -276,6 +303,9 @@ #define OMAP3430_AUTO_DES1_SHIFT 0 /* CM_AUTOIDLE3_CORE */ +#define OMAP3430ES2_AUTO_USBHOST (1 << 0) +#define OMAP3430ES2_AUTO_USBHOST_SHIFT 0 +#define OMAP3430ES2_AUTO_USBTLL (1 << 2) #define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 #define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) @@ -332,8 +362,12 @@ #define OMAP3430ES1_CLKACTIVITY_GFX_MASK (1 << 0) /* CM_FCLKEN_SGX */ -#define OMAP3430ES2_EN_SGX_SHIFT 1 -#define OMAP3430ES2_EN_SGX_MASK (1 << 1) +#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT 1 +#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK (1 << 1) + +/* CM_ICLKEN_SGX */ +#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT 0 +#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK (1 << 0) /* CM_CLKSEL_SGX */ #define OMAP3430ES2_CLKSEL_SGX_SHIFT 0 @@ -349,6 +383,7 @@ /* CM_FCLKEN_WKUP specific bits */ #define OMAP3430ES2_EN_USIMOCP_SHIFT 9 +#define OMAP3430ES2_EN_USIMOCP_MASK (1 << 9) /* CM_ICLKEN_WKUP specific bits */ #define OMAP3430_EN_WDT1 (1 << 4) @@ -357,11 +392,18 @@ #define OMAP3430_EN_32KSYNC_SHIFT 2 /* CM_IDLEST_WKUP specific bits */ -#define OMAP3430_ST_WDT2 (1 << 5) -#define OMAP3430_ST_WDT1 (1 << 4) -#define OMAP3430_ST_32KSYNC (1 << 2) +#define OMAP3430ES2_ST_USIMOCP_SHIFT 9 +#define OMAP3430ES2_ST_USIMOCP_MASK (1 << 9) +#define OMAP3430_ST_WDT2_SHIFT 5 +#define OMAP3430_ST_WDT2_MASK (1 << 5) +#define OMAP3430_ST_WDT1_SHIFT 4 +#define OMAP3430_ST_WDT1_MASK (1 << 4) +#define OMAP3430_ST_32KSYNC_SHIFT 2 +#define OMAP3430_ST_32KSYNC_MASK (1 << 2) /* CM_AUTOIDLE_WKUP */ +#define OMAP3430ES2_AUTO_USIMOCP (1 << 9) +#define OMAP3430ES2_AUTO_USIMOCP_SHIFT 9 #define OMAP3430_AUTO_WDT2 (1 << 5) #define OMAP3430_AUTO_WDT2_SHIFT 5 #define OMAP3430_AUTO_WDT1 (1 << 4) @@ -426,6 +468,8 @@ #define OMAP3430_ST_CORE_CLK_MASK (1 << 0) /* CM_IDLEST2_CKGEN */ +#define OMAP3430ES2_ST_USIM_CLK_SHIFT 2 +#define OMAP3430ES2_ST_USIM_CLK_MASK (1 << 2) #define OMAP3430ES2_ST_120M_CLK_SHIFT 1 #define OMAP3430ES2_ST_120M_CLK_MASK (1 << 1) #define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT 0 @@ -449,8 +493,12 @@ #define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16) #define OMAP3430_CORE_DPLL_DIV_SHIFT 8 #define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8) -#define OMAP3430_SOURCE_54M (1 << 5) -#define OMAP3430_SOURCE_48M (1 << 3) +#define OMAP3430_SOURCE_96M_SHIFT 6 +#define OMAP3430_SOURCE_96M_MASK (1 << 6) +#define OMAP3430_SOURCE_54M_SHIFT 5 +#define OMAP3430_SOURCE_54M_MASK (1 << 5) +#define OMAP3430_SOURCE_48M_SHIFT 3 +#define OMAP3430_SOURCE_48M_MASK (1 << 3) /* CM_CLKSEL2_PLL */ #define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8 @@ -493,7 +541,12 @@ #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0 /* CM_IDLEST_DSS */ -#define OMAP3430_ST_DSS (1 << 0) +#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1 +#define OMAP3430ES2_ST_DSS_IDLE_MASK (1 << 1) +#define OMAP3430ES2_ST_DSS_STDBY_SHIFT 0 +#define OMAP3430ES2_ST_DSS_STDBY_MASK (1 << 0) +#define OMAP3430ES1_ST_DSS_SHIFT 0 +#define OMAP3430ES1_ST_DSS_MASK (1 << 0) /* CM_AUTOIDLE_DSS */ #define OMAP3430_AUTO_DSS (1 << 0) @@ -516,6 +569,8 @@ #define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0) /* CM_FCLKEN_CAM specific bits */ +#define OMAP3430_EN_CSI2 (1 << 1) +#define OMAP3430_EN_CSI2_SHIFT 1 /* CM_ICLKEN_CAM specific bits */ @@ -545,10 +600,14 @@ /* CM_ICLKEN_PER specific bits */ /* CM_IDLEST_PER */ -#define OMAP3430_ST_WDT3 (1 << 12) -#define OMAP3430_ST_MCBSP4 (1 << 2) -#define OMAP3430_ST_MCBSP3 (1 << 1) -#define OMAP3430_ST_MCBSP2 (1 << 0) +#define OMAP3430_ST_WDT3_SHIFT 12 +#define OMAP3430_ST_WDT3_MASK (1 << 12) +#define OMAP3430_ST_MCBSP4_SHIFT 2 +#define OMAP3430_ST_MCBSP4_MASK (1 << 2) +#define OMAP3430_ST_MCBSP3_SHIFT 1 +#define OMAP3430_ST_MCBSP3_MASK (1 << 1) +#define OMAP3430_ST_MCBSP2_SHIFT 0 +#define OMAP3430_ST_MCBSP2_MASK (1 << 0) /* CM_AUTOIDLE_PER */ #define OMAP3430_AUTO_GPIO6 (1 << 17) @@ -676,6 +735,10 @@ #define OMAP3430ES2_EN_USBHOST_MASK (1 << 0) /* CM_IDLEST_USBHOST */ +#define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT 1 +#define OMAP3430ES2_ST_USBHOST_IDLE_MASK (1 << 1) +#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT 0 +#define OMAP3430ES2_ST_USBHOST_STDBY_MASK (1 << 0) /* CM_AUTOIDLE_USBHOST */ #define OMAP3430ES2_AUTO_USBHOST_SHIFT 0 diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index ce03fa75077..d6b4b2f8722 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -28,13 +28,121 @@ #include <mach/eac.h> #include <mach/mmc.h> -#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) -#define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE) +#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) -static struct resource mbox_resources[] = { +static struct resource cam_resources[] = { { - .start = OMAP2_MBOX_BASE, - .end = OMAP2_MBOX_BASE + 0x11f, + .start = OMAP24XX_CAMERA_BASE, + .end = OMAP24XX_CAMERA_BASE + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_24XX_CAM_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device omap_cam_device = { + .name = "omap24xxcam", + .id = -1, + .num_resources = ARRAY_SIZE(cam_resources), + .resource = cam_resources, +}; + +static inline void omap_init_camera(void) +{ + platform_device_register(&omap_cam_device); +} + +#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) + +static struct resource omap3isp_resources[] = { + { + .start = OMAP3430_ISP_BASE, + .end = OMAP3430_ISP_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_CBUFF_BASE, + .end = OMAP3430_ISP_CBUFF_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_CCP2_BASE, + .end = OMAP3430_ISP_CCP2_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_CCDC_BASE, + .end = OMAP3430_ISP_CCDC_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_HIST_BASE, + .end = OMAP3430_ISP_HIST_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_H3A_BASE, + .end = OMAP3430_ISP_H3A_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_PREV_BASE, + .end = OMAP3430_ISP_PREV_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_RESZ_BASE, + .end = OMAP3430_ISP_RESZ_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_SBL_BASE, + .end = OMAP3430_ISP_SBL_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_CSI2A_BASE, + .end = OMAP3430_ISP_CSI2A_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_CSI2PHY_BASE, + .end = OMAP3430_ISP_CSI2PHY_END, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_34XX_CAM_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device omap3isp_device = { + .name = "omap3isp", + .id = -1, + .num_resources = ARRAY_SIZE(omap3isp_resources), + .resource = omap3isp_resources, +}; + +static inline void omap_init_camera(void) +{ + platform_device_register(&omap3isp_device); +} +#else +static inline void omap_init_camera(void) +{ +} +#endif + +#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) + +#define MBOX_REG_SIZE 0x120 + +static struct resource omap2_mbox_resources[] = { + { + .start = OMAP24XX_MAILBOX_BASE, + .end = OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1, .flags = IORESOURCE_MEM, }, { @@ -47,20 +155,40 @@ static struct resource mbox_resources[] = { }, }; +static struct resource omap3_mbox_resources[] = { + { + .start = OMAP34XX_MAILBOX_BASE, + .end = OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_24XX_MAIL_U0_MPU, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device mbox_device = { - .name = "mailbox", + .name = "omap2-mailbox", .id = -1, - .num_resources = ARRAY_SIZE(mbox_resources), - .resource = mbox_resources, }; static inline void omap_init_mbox(void) { + if (cpu_is_omap2420()) { + mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources); + mbox_device.resource = omap2_mbox_resources; + } else if (cpu_is_omap3430()) { + mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources); + mbox_device.resource = omap3_mbox_resources; + } else { + pr_err("%s: platform not supported\n", __func__); + return; + } platform_device_register(&mbox_device); } #else static inline void omap_init_mbox(void) { } -#endif +#endif /* CONFIG_OMAP_MBOX_FWK */ #if defined(CONFIG_OMAP_STI) @@ -348,11 +476,12 @@ static void __init omap_hsmmc_reset(void) } dummy_pdev.id = i; - iclk = clk_get(dev, "mmchs_ick"); + dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i); + iclk = clk_get(dev, "ick"); if (iclk && clk_enable(iclk)) iclk = NULL; - fclk = clk_get(dev, "mmchs_fck"); + fclk = clk_get(dev, "fck"); if (fclk && clk_enable(fclk)) fclk = NULL; @@ -506,6 +635,7 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_hsmmc_reset(); + omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); omap_hdq_init(); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index b52a02fc7cd..34b5914e0f8 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -217,8 +217,13 @@ void __init omap2_check_revision(void) omap_chip.oc = CHIP_IS_OMAP3430; if (omap_rev() == OMAP3430_REV_ES1_0) omap_chip.oc |= CHIP_IS_OMAP3430ES1; - else if (omap_rev() > OMAP3430_REV_ES1_0) + else if (omap_rev() >= OMAP3430_REV_ES2_0 && + omap_rev() <= OMAP3430_REV_ES2_1) omap_chip.oc |= CHIP_IS_OMAP3430ES2; + else if (omap_rev() == OMAP3430_REV_ES3_0) + omap_chip.oc |= CHIP_IS_OMAP3430ES3_0; + else if (omap_rev() == OMAP3430_REV_ES3_1) + omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; } else { pr_err("Uninitialized omap_chip, please fix!\n"); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5ea64f926ed..916fcd3a232 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -27,8 +27,8 @@ #include <mach/mux.h> #include <mach/omapfb.h> #include <mach/sram.h> - -#include "memory.h" +#include <mach/sdrc.h> +#include <mach/gpmc.h> #include "clock.h" @@ -195,12 +195,12 @@ void __init omap2_map_common_io(void) omapfb_reserve_sdram(); } -void __init omap2_init_common_hw(void) +void __init omap2_init_common_hw(struct omap_sdrc_params *sp) { omap2_mux_init(); pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_init_memory(); + omap2_sdrc_init(sp); gpmc_init(); } diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 32b7af3c610..fd5b8a5925c 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -1,9 +1,9 @@ /* - * Mailbox reservation modules for OMAP2 + * Mailbox reservation modules for OMAP2/3 * - * Copyright (C) 2006 Nokia Corporation + * Copyright (C) 2006-2009 Nokia Corporation * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * and Paul Mundt <paul.mundt@nokia.com> + * and Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,40 +18,22 @@ #include <mach/mailbox.h> #include <mach/irqs.h> -#define MAILBOX_REVISION 0x00 -#define MAILBOX_SYSCONFIG 0x10 -#define MAILBOX_SYSSTATUS 0x14 -#define MAILBOX_MESSAGE_0 0x40 -#define MAILBOX_MESSAGE_1 0x44 -#define MAILBOX_MESSAGE_2 0x48 -#define MAILBOX_MESSAGE_3 0x4c -#define MAILBOX_MESSAGE_4 0x50 -#define MAILBOX_MESSAGE_5 0x54 -#define MAILBOX_FIFOSTATUS_0 0x80 -#define MAILBOX_FIFOSTATUS_1 0x84 -#define MAILBOX_FIFOSTATUS_2 0x88 -#define MAILBOX_FIFOSTATUS_3 0x8c -#define MAILBOX_FIFOSTATUS_4 0x90 -#define MAILBOX_FIFOSTATUS_5 0x94 -#define MAILBOX_MSGSTATUS_0 0xc0 -#define MAILBOX_MSGSTATUS_1 0xc4 -#define MAILBOX_MSGSTATUS_2 0xc8 -#define MAILBOX_MSGSTATUS_3 0xcc -#define MAILBOX_MSGSTATUS_4 0xd0 -#define MAILBOX_MSGSTATUS_5 0xd4 -#define MAILBOX_IRQSTATUS_0 0x100 -#define MAILBOX_IRQENABLE_0 0x104 -#define MAILBOX_IRQSTATUS_1 0x108 -#define MAILBOX_IRQENABLE_1 0x10c -#define MAILBOX_IRQSTATUS_2 0x110 -#define MAILBOX_IRQENABLE_2 0x114 -#define MAILBOX_IRQSTATUS_3 0x118 -#define MAILBOX_IRQENABLE_3 0x11c - -static unsigned long mbox_base; - -#define MAILBOX_IRQ_NOTFULL(n) (1 << (2 * (n) + 1)) -#define MAILBOX_IRQ_NEWMSG(n) (1 << (2 * (n))) +#define MAILBOX_REVISION 0x000 +#define MAILBOX_SYSCONFIG 0x010 +#define MAILBOX_SYSSTATUS 0x014 +#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) +#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m)) +#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m)) +#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u)) +#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u)) + +#define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u))) +#define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1)) + +#define MBOX_REG_SIZE 0x120 +#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32)) + +static void __iomem *mbox_base; struct omap_mbox2_fifo { unsigned long msg; @@ -66,6 +48,7 @@ struct omap_mbox2_priv { unsigned long irqstatus; u32 newmsg_bit; u32 notfull_bit; + u32 ctx[MBOX_NR_REGS]; }; static struct clk *mbox_ick_handle; @@ -73,14 +56,14 @@ static struct clk *mbox_ick_handle; static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq); -static inline unsigned int mbox_read_reg(unsigned int reg) +static inline unsigned int mbox_read_reg(size_t ofs) { - return __raw_readl(mbox_base + reg); + return __raw_readl(mbox_base + ofs); } -static inline void mbox_write_reg(unsigned int val, unsigned int reg) +static inline void mbox_write_reg(u32 val, size_t ofs) { - __raw_writel(val, mbox_base + reg); + __raw_writel(val, mbox_base + ofs); } /* Mailbox H/W preparations */ @@ -95,6 +78,9 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) } clk_enable(mbox_ick_handle); + l = mbox_read_reg(MAILBOX_REVISION); + pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); + /* set smart-idle & autoidle */ l = mbox_read_reg(MAILBOX_SYSCONFIG); l |= 0x00000011; @@ -183,6 +169,32 @@ static int omap2_mbox_is_irq(struct omap_mbox *mbox, return (enable & status & bit); } +static void omap2_mbox_save_ctx(struct omap_mbox *mbox) +{ + int i; + struct omap_mbox2_priv *p = mbox->priv; + + for (i = 0; i < MBOX_NR_REGS; i++) { + p->ctx[i] = mbox_read_reg(i * sizeof(u32)); + + dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, + i, p->ctx[i]); + } +} + +static void omap2_mbox_restore_ctx(struct omap_mbox *mbox) +{ + int i; + struct omap_mbox2_priv *p = mbox->priv; + + for (i = 0; i < MBOX_NR_REGS; i++) { + mbox_write_reg(p->ctx[i], i * sizeof(u32)); + + dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, + i, p->ctx[i]); + } +} + static struct omap_mbox_ops omap2_mbox_ops = { .type = OMAP_MBOX_TYPE2, .startup = omap2_mbox_startup, @@ -195,6 +207,8 @@ static struct omap_mbox_ops omap2_mbox_ops = { .disable_irq = omap2_mbox_disable_irq, .ack_irq = omap2_mbox_ack_irq, .is_irq = omap2_mbox_is_irq, + .save_ctx = omap2_mbox_save_ctx, + .restore_ctx = omap2_mbox_restore_ctx, }; /* @@ -209,15 +223,15 @@ static struct omap_mbox_ops omap2_mbox_ops = { /* DSP */ static struct omap_mbox2_priv omap2_mbox_dsp_priv = { .tx_fifo = { - .msg = MAILBOX_MESSAGE_0, - .fifo_stat = MAILBOX_FIFOSTATUS_0, + .msg = MAILBOX_MESSAGE(0), + .fifo_stat = MAILBOX_FIFOSTATUS(0), }, .rx_fifo = { - .msg = MAILBOX_MESSAGE_1, - .msg_stat = MAILBOX_MSGSTATUS_1, + .msg = MAILBOX_MESSAGE(1), + .msg_stat = MAILBOX_MSGSTATUS(1), }, - .irqenable = MAILBOX_IRQENABLE_0, - .irqstatus = MAILBOX_IRQSTATUS_0, + .irqenable = MAILBOX_IRQENABLE(0), + .irqstatus = MAILBOX_IRQSTATUS(0), .notfull_bit = MAILBOX_IRQ_NOTFULL(0), .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), }; @@ -229,18 +243,18 @@ struct omap_mbox mbox_dsp_info = { }; EXPORT_SYMBOL(mbox_dsp_info); -/* IVA */ +#if defined(CONFIG_ARCH_OMAP2420) /* IVA */ static struct omap_mbox2_priv omap2_mbox_iva_priv = { .tx_fifo = { - .msg = MAILBOX_MESSAGE_2, - .fifo_stat = MAILBOX_FIFOSTATUS_2, + .msg = MAILBOX_MESSAGE(2), + .fifo_stat = MAILBOX_FIFOSTATUS(2), }, .rx_fifo = { - .msg = MAILBOX_MESSAGE_3, - .msg_stat = MAILBOX_MSGSTATUS_3, + .msg = MAILBOX_MESSAGE(3), + .msg_stat = MAILBOX_MSGSTATUS(3), }, - .irqenable = MAILBOX_IRQENABLE_3, - .irqstatus = MAILBOX_IRQSTATUS_3, + .irqenable = MAILBOX_IRQENABLE(3), + .irqstatus = MAILBOX_IRQSTATUS(3), .notfull_bit = MAILBOX_IRQ_NOTFULL(2), .newmsg_bit = MAILBOX_IRQ_NEWMSG(3), }; @@ -250,17 +264,12 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -static int __init omap2_mbox_probe(struct platform_device *pdev) +static int __devinit omap2_mbox_probe(struct platform_device *pdev) { struct resource *res; - int ret = 0; - - if (pdev->num_resources != 3) { - dev_err(&pdev->dev, "invalid number of resources: %d\n", - pdev->num_resources); - return -ENODEV; - } + int ret; /* MBOX base */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -268,42 +277,61 @@ static int __init omap2_mbox_probe(struct platform_device *pdev) dev_err(&pdev->dev, "invalid mem resource\n"); return -ENODEV; } - mbox_base = res->start; + mbox_base = ioremap(res->start, res->end - res->start); + if (!mbox_base) + return -ENOMEM; - /* DSP IRQ */ - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (unlikely(!res)) { + /* DSP or IVA2 IRQ */ + mbox_dsp_info.irq = platform_get_irq(pdev, 0); + if (mbox_dsp_info.irq < 0) { dev_err(&pdev->dev, "invalid irq resource\n"); - return -ENODEV; + ret = -ENODEV; + goto err_dsp; } - mbox_dsp_info.irq = res->start; - ret = omap_mbox_register(&mbox_dsp_info); - - /* IVA IRQ */ - res = platform_get_resource(pdev, IORESOURCE_IRQ, 1); - if (unlikely(!res)) { - dev_err(&pdev->dev, "invalid irq resource\n"); - return -ENODEV; + ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); + if (ret) + goto err_dsp; + +#if defined(CONFIG_ARCH_OMAP2420) /* IVA */ + if (cpu_is_omap2420()) { + /* IVA IRQ */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (unlikely(!res)) { + dev_err(&pdev->dev, "invalid irq resource\n"); + ret = -ENODEV; + goto err_iva1; + } + mbox_iva_info.irq = res->start; + ret = omap_mbox_register(&pdev->dev, &mbox_iva_info); + if (ret) + goto err_iva1; } - mbox_iva_info.irq = res->start; - - ret = omap_mbox_register(&mbox_iva_info); +#endif + return 0; +err_iva1: + omap_mbox_unregister(&mbox_dsp_info); +err_dsp: + iounmap(mbox_base); return ret; } -static int omap2_mbox_remove(struct platform_device *pdev) +static int __devexit omap2_mbox_remove(struct platform_device *pdev) { +#if defined(CONFIG_ARCH_OMAP2420) + omap_mbox_unregister(&mbox_iva_info); +#endif omap_mbox_unregister(&mbox_dsp_info); + iounmap(mbox_base); return 0; } static struct platform_driver omap2_mbox_driver = { .probe = omap2_mbox_probe, - .remove = omap2_mbox_remove, + .remove = __devexit_p(omap2_mbox_remove), .driver = { - .name = "mailbox", + .name = "omap2-mailbox", }, }; @@ -320,4 +348,7 @@ static void __exit omap2_mbox_exit(void) module_init(omap2_mbox_init); module_exit(omap2_mbox_exit); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions"); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt"); +MODULE_ALIAS("platform:omap2-mailbox"); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a9e631fc113..a5c0f0435cd 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -24,8 +24,6 @@ #include <mach/cpu.h> #include <mach/mcbsp.h> -const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; - static void omap2_mcbsp2_mux_setup(void) { omap_cfg_reg(Y15_24XX_MCBSP2_CLKX); @@ -57,8 +55,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -67,8 +63,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, }; #define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) @@ -86,8 +80,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -96,8 +88,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP3_BASE, @@ -106,8 +96,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP4_BASE, @@ -116,8 +104,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP5_BASE, @@ -126,8 +112,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, }; #define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) @@ -145,8 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -155,8 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -165,8 +145,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -175,8 +153,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -185,8 +161,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_names = clk_names, - .num_clks = 2, }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h deleted file mode 100644 index bb3db80a7c4..00000000000 --- a/arch/arm/mach-omap2/memory.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/memory.h - * - * Interface for memory timing related functions for OMAP24XX - * - * Copyright (C) 2005 Texas Instruments Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * - * Copyright (C) 2005 Nokia Corporation - * Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H -#define ARCH_ARM_MACH_OMAP2_MEMORY_H - -/* Memory timings */ -#define M_DDR 1 -#define M_LOCK_CTRL (1 << 2) -#define M_UNLOCK 0 -#define M_LOCK 1 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode); -extern u32 omap2_memory_get_slow_dll_ctrl(void); -extern u32 omap2_memory_get_fast_dll_ctrl(void); -extern u32 omap2_memory_get_type(void); -u32 omap2_dll_force_needed(void); -u32 omap2_reprogram_sdrc(u32 level, u32 force); -void __init omap2_init_memory(void); -void __init gpmc_init(void); - -#endif diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 437f52073f6..dc40b3e7220 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -17,6 +17,7 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <linux/i2c/twl4030.h> +#include <linux/regulator/machine.h> #include <mach/hardware.h> #include <mach/control.h> @@ -44,6 +45,7 @@ #define VMMC2_315V 0x0c #define VMMC2_300V 0x0b #define VMMC2_285V 0x0a +#define VMMC2_280V 0x09 #define VMMC2_260V 0x08 #define VMMC2_185V 0x06 #define VMMC2_DEDICATED 0x2E @@ -59,8 +61,8 @@ static struct twl_mmc_controller { struct omap_mmc_platform_data *mmc; u8 twl_vmmc_dev_grp; u8 twl_mmc_dedicated; - char name[HSMMC_NAME_LEN]; -} hsmmc[] = { + char name[HSMMC_NAME_LEN + 1]; +} hsmmc[OMAP34XX_NR_MMC] = { { .twl_vmmc_dev_grp = VMMC1_DEV_GRP, .twl_mmc_dedicated = VMMC1_DEDICATED, @@ -98,6 +100,14 @@ static int twl_mmc_get_ro(struct device *dev, int slot) return gpio_get_value_cansleep(mmc->slots[0].gpio_wp); } +static int twl_mmc_get_cover_state(struct device *dev, int slot) +{ + struct omap_mmc_platform_data *mmc = dev->platform_data; + + /* NOTE: assumes card detect signal is active-low */ + return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); +} + /* * MMC Slot Initialization. */ @@ -166,66 +176,85 @@ static int twl_mmc_resume(struct device *dev, int slot) /* * Sets the MMC voltage in twl4030 */ + +#define MMC1_OCR (MMC_VDD_165_195 \ + |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) +#define MMC2_OCR (MMC_VDD_165_195 \ + |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \ + |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32) + static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd) { int ret; - u8 vmmc, dev_grp_val; - - switch (1 << vdd) { - case MMC_VDD_35_36: - case MMC_VDD_34_35: - case MMC_VDD_33_34: - case MMC_VDD_32_33: - case MMC_VDD_31_32: - case MMC_VDD_30_31: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_315V; - else - vmmc = VMMC2_315V; - break; - case MMC_VDD_29_30: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_315V; - else - vmmc = VMMC2_300V; - break; - case MMC_VDD_27_28: - case MMC_VDD_26_27: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_285V; - else - vmmc = VMMC2_285V; - break; - case MMC_VDD_25_26: - case MMC_VDD_24_25: - case MMC_VDD_23_24: - case MMC_VDD_22_23: - case MMC_VDD_21_22: - case MMC_VDD_20_21: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) - vmmc = VMMC1_285V; - else - vmmc = VMMC2_260V; - break; - case MMC_VDD_165_195: - if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) + u8 vmmc = 0, dev_grp_val; + + if (!vdd) + goto doit; + + if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) { + /* VMMC1: max 220 mA. And for 8-bit mode, + * VSIM: max 50 mA + */ + switch (1 << vdd) { + case MMC_VDD_165_195: vmmc = VMMC1_185V; - else + /* and VSIM_180V */ + break; + case MMC_VDD_28_29: + vmmc = VMMC1_285V; + /* and VSIM_280V */ + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + vmmc = VMMC1_300V; + /* and VSIM_300V */ + break; + case MMC_VDD_31_32: + vmmc = VMMC1_315V; + /* error if VSIM needed */ + break; + default: + return -EINVAL; + } + } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) { + /* VMMC2: max 100 mA */ + switch (1 << vdd) { + case MMC_VDD_165_195: vmmc = VMMC2_185V; - break; - default: - vmmc = 0; - break; + break; + case MMC_VDD_25_26: + case MMC_VDD_26_27: + vmmc = VMMC2_260V; + break; + case MMC_VDD_27_28: + vmmc = VMMC2_280V; + break; + case MMC_VDD_28_29: + vmmc = VMMC2_285V; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + vmmc = VMMC2_300V; + break; + case MMC_VDD_31_32: + vmmc = VMMC2_315V; + break; + default: + return -EINVAL; + } + } else { + return -EINVAL; } - if (vmmc) +doit: + if (vdd) dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */ else dev_grp_val = LDO_CLR; /* Power down */ ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, dev_grp_val, c->twl_vmmc_dev_grp); - if (ret) + if (ret || !vdd) return ret; ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, @@ -242,6 +271,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, struct twl_mmc_controller *c = &hsmmc[0]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* + * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the + * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both + * 1.8V and 3.0V modes, controlled by the PBIAS register. + * + * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which + * is most naturally TWL VSIM; those pins also use PBIAS. + */ if (power_on) { if (cpu_is_omap2430()) { reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1); @@ -298,6 +335,12 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd struct twl_mmc_controller *c = &hsmmc[1]; struct omap_mmc_platform_data *mmc = dev->platform_data; + /* + * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP + * VDDS is used to power the pins, optionally with a transceiver to + * support cards using voltages other than VDDS (1.8V nominal). When a + * transceiver is used, DAT3..7 are muxed as transceiver control pins. + */ if (power_on) { if (mmc->slots[0].internal_clock) { u32 reg; @@ -314,6 +357,16 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd return ret; } +static int twl_mmc3_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ + /* + * Assume MMC3 has self-powered device connected, for example on-board + * chip with external power source. + */ + return 0; +} + static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) @@ -349,13 +402,13 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) return; } - sprintf(twl->name, "mmc%islot%i", c->mmc, 1); + if (c->name) + strncpy(twl->name, c->name, HSMMC_NAME_LEN); + else + snprintf(twl->name, ARRAY_SIZE(twl->name), + "mmc%islot%i", c->mmc, 1); mmc->slots[0].name = twl->name; mmc->nr_slots = 1; - mmc->slots[0].ocr_mask = MMC_VDD_165_195 | - MMC_VDD_26_27 | MMC_VDD_27_28 | - MMC_VDD_29_30 | - MMC_VDD_30_31 | MMC_VDD_31_32; mmc->slots[0].wires = c->wires; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; @@ -369,7 +422,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) mmc->slots[0].switch_pin = c->gpio_cd; mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd); - mmc->slots[0].card_detect = twl_mmc_card_detect; + if (c->cover_only) + mmc->slots[0].get_cover_state = twl_mmc_get_cover_state; + else + mmc->slots[0].card_detect = twl_mmc_card_detect; } else mmc->slots[0].switch_pin = -EINVAL; @@ -385,24 +441,43 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) /* NOTE: we assume OMAP's MMC1 and MMC2 use * the TWL4030's VMMC1 and VMMC2, respectively; - * and that OMAP's MMC3 isn't used. + * and that MMC3 device has it's own power source. */ switch (c->mmc) { case 1: mmc->slots[0].set_power = twl_mmc1_set_power; + mmc->slots[0].ocr_mask = MMC1_OCR; break; case 2: mmc->slots[0].set_power = twl_mmc2_set_power; + if (c->transceiver) + mmc->slots[0].ocr_mask = MMC2_OCR; + else + mmc->slots[0].ocr_mask = MMC_VDD_165_195; + break; + case 3: + mmc->slots[0].set_power = twl_mmc3_set_power; + mmc->slots[0].ocr_mask = MMC_VDD_165_195; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); + kfree(mmc); continue; } hsmmc_data[c->mmc - 1] = mmc; } omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); + + /* pass the device nodes back to board setup code */ + for (c = controllers; c->mmc; c++) { + struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; + + if (!c->mmc || c->mmc > nr_hsmmc) + continue; + c->dev = mmc->dev; + } } #endif diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h index e1c8076400c..ea59e862429 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.h +++ b/arch/arm/mach-omap2/mmc-twl4030.h @@ -9,9 +9,13 @@ struct twl4030_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u8 wires; /* 1/4/8 wires */ + bool transceiver; /* MMC-2 option */ + bool ext_clock; /* use external pin for input clock */ + bool cover_only; /* No card detect - just cover switch */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ - int ext_clock:1; /* use external pin for input clock */ + char *name; /* or NULL for default */ + struct device *dev; /* returned: pointer to mmc adapter */ }; #if defined(CONFIG_TWL4030_CORE) && \ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index dacb41f130c..026c4fc883a 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -453,10 +453,37 @@ MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, /* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix. + * (Always specify PIN_INPUT, except for names suffixed by "_OUT".) * No internal pullup/pulldown without "_UP" or "_DOWN" suffix. */ +MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) +MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) +MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) +MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) +MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) +MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) +MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) }; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 55361c16c9d..ea8ceaed09c 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -103,7 +103,7 @@ static struct platform_suspend_ops omap_pm_ops = { .valid = suspend_valid_only_mem, }; -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { return 0; } diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h index 1e151faebbd..691470ea4c6 100644 --- a/arch/arm/mach-omap2/powerdomains.h +++ b/arch/arm/mach-omap2/powerdomains.h @@ -171,13 +171,19 @@ static struct powerdomain *powerdomains_omap[] __initdata = { &iva2_pwrdm, &mpu_34xx_pwrdm, &neon_pwrdm, - &core_34xx_pwrdm, + &core_34xx_pre_es3_1_pwrdm, + &core_34xx_es3_1_pwrdm, &cam_pwrdm, &dss_pwrdm, &per_pwrdm, &emu_pwrdm, &sgx_pwrdm, &usbhost_pwrdm, + &dpll1_pwrdm, + &dpll2_pwrdm, + &dpll3_pwrdm, + &dpll4_pwrdm, + &dpll5_pwrdm, #endif NULL diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index f573f710839..4dcf94b800a 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -200,12 +200,33 @@ static struct powerdomain mpu_34xx_pwrdm = { }; /* No wkdeps or sleepdeps for 34xx core apparently */ -static struct powerdomain core_34xx_pwrdm = { +static struct powerdomain core_34xx_pre_es3_1_pwrdm = { .name = "core_pwrdm", .prcm_offs = CORE_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_IS_OMAP3430ES2 | + CHIP_IS_OMAP3430ES3_0), + .pwrsts = PWRSTS_OFF_RET_ON, + .dep_bit = OMAP3430_EN_CORE_SHIFT, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */ + [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ + }, +}; + +/* No wkdeps or sleepdeps for 34xx core apparently */ +static struct powerdomain core_34xx_es3_1_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1), .pwrsts = PWRSTS_OFF_RET_ON, .dep_bit = OMAP3430_EN_CORE_SHIFT, + .flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */ .banks = 2, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */ @@ -236,14 +257,19 @@ static struct powerdomain dss_pwrdm = { }, }; +/* + * Although the 34XX TRM Rev K Table 4-371 notes that retention is a + * possible SGX powerstate, the SGX device itself does not support + * retention. + */ static struct powerdomain sgx_pwrdm = { .name = "sgx_pwrdm", .prcm_offs = OMAP3430ES2_SGX_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), .wkdep_srcs = gfx_sgx_wkdeps, .sleepdep_srcs = cam_gfx_sleepdeps, /* XXX This is accurate for 3430 SGX, but what about GFX? */ - .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts = PWRSTS_OFF_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, .banks = 1, .pwrsts_mem_ret = { @@ -307,11 +333,12 @@ static struct powerdomain neon_pwrdm = { static struct powerdomain usbhost_pwrdm = { .name = "usbhost_pwrdm", .prcm_offs = OMAP3430ES2_USBHOST_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), .wkdep_srcs = per_usbhost_wkdeps, .sleepdep_srcs = dss_per_usbhost_sleepdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, + .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */ .banks = 1, .pwrsts_mem_ret = { [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ @@ -321,6 +348,37 @@ static struct powerdomain usbhost_pwrdm = { }, }; +static struct powerdomain dpll1_pwrdm = { + .name = "dpll1_pwrdm", + .prcm_offs = MPU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll2_pwrdm = { + .name = "dpll2_pwrdm", + .prcm_offs = OMAP3430_IVA2_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll3_pwrdm = { + .name = "dpll3_pwrdm", + .prcm_offs = PLL_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll4_pwrdm = { + .name = "dpll4_pwrdm", + .prcm_offs = PLL_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain dpll5_pwrdm = { + .name = "dpll5_pwrdm", + .prcm_offs = PLL_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), +}; + + #endif /* CONFIG_ARCH_OMAP34XX */ diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 4a32822ff3f..812d50ee495 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -113,33 +113,58 @@ #define OMAP2430_EN_USBHS (1 << 6) /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */ -#define OMAP2420_ST_MMC (1 << 26) -#define OMAP24XX_ST_UART2 (1 << 22) -#define OMAP24XX_ST_UART1 (1 << 21) -#define OMAP24XX_ST_MCSPI2 (1 << 18) -#define OMAP24XX_ST_MCSPI1 (1 << 17) -#define OMAP24XX_ST_GPT12 (1 << 14) -#define OMAP24XX_ST_GPT11 (1 << 13) -#define OMAP24XX_ST_GPT10 (1 << 12) -#define OMAP24XX_ST_GPT9 (1 << 11) -#define OMAP24XX_ST_GPT8 (1 << 10) -#define OMAP24XX_ST_GPT7 (1 << 9) -#define OMAP24XX_ST_GPT6 (1 << 8) -#define OMAP24XX_ST_GPT5 (1 << 7) -#define OMAP24XX_ST_GPT4 (1 << 6) -#define OMAP24XX_ST_GPT3 (1 << 5) -#define OMAP24XX_ST_GPT2 (1 << 4) -#define OMAP2420_ST_VLYNQ (1 << 3) +#define OMAP2420_ST_MMC_SHIFT 26 +#define OMAP2420_ST_MMC_MASK (1 << 26) +#define OMAP24XX_ST_UART2_SHIFT 22 +#define OMAP24XX_ST_UART2_MASK (1 << 22) +#define OMAP24XX_ST_UART1_SHIFT 21 +#define OMAP24XX_ST_UART1_MASK (1 << 21) +#define OMAP24XX_ST_MCSPI2_SHIFT 18 +#define OMAP24XX_ST_MCSPI2_MASK (1 << 18) +#define OMAP24XX_ST_MCSPI1_SHIFT 17 +#define OMAP24XX_ST_MCSPI1_MASK (1 << 17) +#define OMAP24XX_ST_GPT12_SHIFT 14 +#define OMAP24XX_ST_GPT12_MASK (1 << 14) +#define OMAP24XX_ST_GPT11_SHIFT 13 +#define OMAP24XX_ST_GPT11_MASK (1 << 13) +#define OMAP24XX_ST_GPT10_SHIFT 12 +#define OMAP24XX_ST_GPT10_MASK (1 << 12) +#define OMAP24XX_ST_GPT9_SHIFT 11 +#define OMAP24XX_ST_GPT9_MASK (1 << 11) +#define OMAP24XX_ST_GPT8_SHIFT 10 +#define OMAP24XX_ST_GPT8_MASK (1 << 10) +#define OMAP24XX_ST_GPT7_SHIFT 9 +#define OMAP24XX_ST_GPT7_MASK (1 << 9) +#define OMAP24XX_ST_GPT6_SHIFT 8 +#define OMAP24XX_ST_GPT6_MASK (1 << 8) +#define OMAP24XX_ST_GPT5_SHIFT 7 +#define OMAP24XX_ST_GPT5_MASK (1 << 7) +#define OMAP24XX_ST_GPT4_SHIFT 6 +#define OMAP24XX_ST_GPT4_MASK (1 << 6) +#define OMAP24XX_ST_GPT3_SHIFT 5 +#define OMAP24XX_ST_GPT3_MASK (1 << 5) +#define OMAP24XX_ST_GPT2_SHIFT 4 +#define OMAP24XX_ST_GPT2_MASK (1 << 4) +#define OMAP2420_ST_VLYNQ_SHIFT 3 +#define OMAP2420_ST_VLYNQ_MASK (1 << 3) /* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */ -#define OMAP2430_ST_MDM_INTC (1 << 11) -#define OMAP2430_ST_GPIO5 (1 << 10) -#define OMAP2430_ST_MCSPI3 (1 << 9) -#define OMAP2430_ST_MMCHS2 (1 << 8) -#define OMAP2430_ST_MMCHS1 (1 << 7) -#define OMAP2430_ST_USBHS (1 << 6) -#define OMAP24XX_ST_UART3 (1 << 2) -#define OMAP24XX_ST_USB (1 << 0) +#define OMAP2430_ST_MDM_INTC_SHIFT 11 +#define OMAP2430_ST_MDM_INTC_MASK (1 << 11) +#define OMAP2430_ST_GPIO5_SHIFT 10 +#define OMAP2430_ST_GPIO5_MASK (1 << 10) +#define OMAP2430_ST_MCSPI3_SHIFT 9 +#define OMAP2430_ST_MCSPI3_MASK (1 << 9) +#define OMAP2430_ST_MMCHS2_SHIFT 8 +#define OMAP2430_ST_MMCHS2_MASK (1 << 8) +#define OMAP2430_ST_MMCHS1_SHIFT 7 +#define OMAP2430_ST_MMCHS1_MASK (1 << 7) +#define OMAP2430_ST_USBHS_SHIFT 6 +#define OMAP2430_ST_USBHS_MASK (1 << 6) +#define OMAP24XX_ST_UART3_SHIFT 2 +#define OMAP24XX_ST_UART3_MASK (1 << 2) +#define OMAP24XX_ST_USB_SHIFT 0 +#define OMAP24XX_ST_USB_MASK (1 << 0) /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP24XX_EN_GPIOS_SHIFT 2 @@ -148,11 +173,13 @@ #define OMAP24XX_EN_GPT1 (1 << 0) /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ -#define OMAP24XX_ST_GPIOS (1 << 2) -#define OMAP24XX_ST_GPT1 (1 << 0) +#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2) +#define OMAP24XX_ST_GPIOS_MASK 2 +#define OMAP24XX_ST_GPT1_SHIFT (1 << 0) +#define OMAP24XX_ST_GPT1_MASK 0 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */ -#define OMAP2430_ST_MDM (1 << 0) +#define OMAP2430_ST_MDM_SHIFT (1 << 0) /* 3430 register bits shared between CM & PRM registers */ @@ -205,24 +232,46 @@ #define OMAP3430_EN_HSOTGUSB_SHIFT 4 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */ -#define OMAP3430_ST_MMC2 (1 << 25) -#define OMAP3430_ST_MMC1 (1 << 24) -#define OMAP3430_ST_MCSPI4 (1 << 21) -#define OMAP3430_ST_MCSPI3 (1 << 20) -#define OMAP3430_ST_MCSPI2 (1 << 19) -#define OMAP3430_ST_MCSPI1 (1 << 18) -#define OMAP3430_ST_I2C3 (1 << 17) -#define OMAP3430_ST_I2C2 (1 << 16) -#define OMAP3430_ST_I2C1 (1 << 15) -#define OMAP3430_ST_UART2 (1 << 14) -#define OMAP3430_ST_UART1 (1 << 13) -#define OMAP3430_ST_GPT11 (1 << 12) -#define OMAP3430_ST_GPT10 (1 << 11) -#define OMAP3430_ST_MCBSP5 (1 << 10) -#define OMAP3430_ST_MCBSP1 (1 << 9) -#define OMAP3430_ST_FSHOSTUSB (1 << 5) -#define OMAP3430_ST_HSOTGUSB (1 << 4) -#define OMAP3430_ST_D2D (1 << 3) +#define OMAP3430_ST_MMC2_SHIFT 25 +#define OMAP3430_ST_MMC2_MASK (1 << 25) +#define OMAP3430_ST_MMC1_SHIFT 24 +#define OMAP3430_ST_MMC1_MASK (1 << 24) +#define OMAP3430_ST_MCSPI4_SHIFT 21 +#define OMAP3430_ST_MCSPI4_MASK (1 << 21) +#define OMAP3430_ST_MCSPI3_SHIFT 20 +#define OMAP3430_ST_MCSPI3_MASK (1 << 20) +#define OMAP3430_ST_MCSPI2_SHIFT 19 +#define OMAP3430_ST_MCSPI2_MASK (1 << 19) +#define OMAP3430_ST_MCSPI1_SHIFT 18 +#define OMAP3430_ST_MCSPI1_MASK (1 << 18) +#define OMAP3430_ST_I2C3_SHIFT 17 +#define OMAP3430_ST_I2C3_MASK (1 << 17) +#define OMAP3430_ST_I2C2_SHIFT 16 +#define OMAP3430_ST_I2C2_MASK (1 << 16) +#define OMAP3430_ST_I2C1_SHIFT 15 +#define OMAP3430_ST_I2C1_MASK (1 << 15) +#define OMAP3430_ST_UART2_SHIFT 14 +#define OMAP3430_ST_UART2_MASK (1 << 14) +#define OMAP3430_ST_UART1_SHIFT 13 +#define OMAP3430_ST_UART1_MASK (1 << 13) +#define OMAP3430_ST_GPT11_SHIFT 12 +#define OMAP3430_ST_GPT11_MASK (1 << 12) +#define OMAP3430_ST_GPT10_SHIFT 11 +#define OMAP3430_ST_GPT10_MASK (1 << 11) +#define OMAP3430_ST_MCBSP5_SHIFT 10 +#define OMAP3430_ST_MCBSP5_MASK (1 << 10) +#define OMAP3430_ST_MCBSP1_SHIFT 9 +#define OMAP3430_ST_MCBSP1_MASK (1 << 9) +#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT 5 +#define OMAP3430ES1_ST_FSHOSTUSB_MASK (1 << 5) +#define OMAP3430ES1_ST_HSOTGUSB_SHIFT 4 +#define OMAP3430ES1_ST_HSOTGUSB_MASK (1 << 4) +#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5 +#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK (1 << 5) +#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT 4 +#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK (1 << 4) +#define OMAP3430_ST_D2D_SHIFT 3 +#define OMAP3430_ST_D2D_MASK (1 << 3) /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP3430_EN_GPIO1 (1 << 3) @@ -241,11 +290,16 @@ #define OMAP3430_EN_GPT12_SHIFT 1 /* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */ -#define OMAP3430_ST_SR2 (1 << 7) -#define OMAP3430_ST_SR1 (1 << 6) -#define OMAP3430_ST_GPIO1 (1 << 3) -#define OMAP3430_ST_GPT12 (1 << 1) -#define OMAP3430_ST_GPT1 (1 << 0) +#define OMAP3430_ST_SR2_SHIFT 7 +#define OMAP3430_ST_SR2_MASK (1 << 7) +#define OMAP3430_ST_SR1_SHIFT 6 +#define OMAP3430_ST_SR1_MASK (1 << 6) +#define OMAP3430_ST_GPIO1_SHIFT 3 +#define OMAP3430_ST_GPIO1_MASK (1 << 3) +#define OMAP3430_ST_GPT12_SHIFT 1 +#define OMAP3430_ST_GPT12_MASK (1 << 1) +#define OMAP3430_ST_GPT1_SHIFT 0 +#define OMAP3430_ST_GPT1_MASK (1 << 0) /* * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM, @@ -296,20 +350,34 @@ #define OMAP3430_EN_MCBSP2_SHIFT 0 /* CM_IDLEST_PER, PM_WKST_PER shared bits */ -#define OMAP3430_ST_GPIO6 (1 << 17) -#define OMAP3430_ST_GPIO5 (1 << 16) -#define OMAP3430_ST_GPIO4 (1 << 15) -#define OMAP3430_ST_GPIO3 (1 << 14) -#define OMAP3430_ST_GPIO2 (1 << 13) -#define OMAP3430_ST_UART3 (1 << 11) -#define OMAP3430_ST_GPT9 (1 << 10) -#define OMAP3430_ST_GPT8 (1 << 9) -#define OMAP3430_ST_GPT7 (1 << 8) -#define OMAP3430_ST_GPT6 (1 << 7) -#define OMAP3430_ST_GPT5 (1 << 6) -#define OMAP3430_ST_GPT4 (1 << 5) -#define OMAP3430_ST_GPT3 (1 << 4) -#define OMAP3430_ST_GPT2 (1 << 3) +#define OMAP3430_ST_GPIO6_SHIFT 17 +#define OMAP3430_ST_GPIO6_MASK (1 << 17) +#define OMAP3430_ST_GPIO5_SHIFT 16 +#define OMAP3430_ST_GPIO5_MASK (1 << 16) +#define OMAP3430_ST_GPIO4_SHIFT 15 +#define OMAP3430_ST_GPIO4_MASK (1 << 15) +#define OMAP3430_ST_GPIO3_SHIFT 14 +#define OMAP3430_ST_GPIO3_MASK (1 << 14) +#define OMAP3430_ST_GPIO2_SHIFT 13 +#define OMAP3430_ST_GPIO2_MASK (1 << 13) +#define OMAP3430_ST_UART3_SHIFT 11 +#define OMAP3430_ST_UART3_MASK (1 << 11) +#define OMAP3430_ST_GPT9_SHIFT 10 +#define OMAP3430_ST_GPT9_MASK (1 << 10) +#define OMAP3430_ST_GPT8_SHIFT 9 +#define OMAP3430_ST_GPT8_MASK (1 << 9) +#define OMAP3430_ST_GPT7_SHIFT 8 +#define OMAP3430_ST_GPT7_MASK (1 << 8) +#define OMAP3430_ST_GPT6_SHIFT 7 +#define OMAP3430_ST_GPT6_MASK (1 << 7) +#define OMAP3430_ST_GPT5_SHIFT 6 +#define OMAP3430_ST_GPT5_MASK (1 << 6) +#define OMAP3430_ST_GPT4_SHIFT 5 +#define OMAP3430_ST_GPT4_MASK (1 << 5) +#define OMAP3430_ST_GPT3_SHIFT 4 +#define OMAP3430_ST_GPT3_MASK (1 << 4) +#define OMAP3430_ST_GPT2_SHIFT 3 +#define OMAP3430_ST_GPT2_MASK (1 << 3) /* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */ #define OMAP3430_EN_CORE_SHIFT 0 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 5b5ecfe6c99..c6a7940f428 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -366,6 +366,7 @@ /* PM_WKEN_WKUP specific bits */ #define OMAP3430_EN_IO (1 << 8) +#define OMAP3430_EN_GPIO1 (1 << 3) /* PM_MPUGRPSEL_WKUP specific bits */ @@ -452,6 +453,14 @@ #define OMAP3430_CMDRA0_MASK (0xff << 0) /* PRM_VC_CMD_VAL_0 specific bits */ +#define OMAP3430_VC_CMD_ON_SHIFT 24 +#define OMAP3430_VC_CMD_ON_MASK (0xFF << 24) +#define OMAP3430_VC_CMD_ONLP_SHIFT 16 +#define OMAP3430_VC_CMD_ONLP_MASK (0xFF << 16) +#define OMAP3430_VC_CMD_RET_SHIFT 8 +#define OMAP3430_VC_CMD_RET_MASK (0xFF << 8) +#define OMAP3430_VC_CMD_OFF_SHIFT 0 +#define OMAP3430_VC_CMD_OFF_MASK (0xFF << 0) /* PRM_VC_CMD_VAL_1 specific bits */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index e4dc4b17881..826d326b806 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -141,6 +141,19 @@ #define PM_PWSTCTRL 0x00e0 #define PM_PWSTST 0x00e4 +/* Omap2 specific registers */ +#define OMAP24XX_PM_WKEN2 0x00a4 +#define OMAP24XX_PM_WKST2 0x00b4 + +#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ +#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ +#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 +#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc + +/* Omap3 specific registers */ +#define OMAP3430ES2_PM_WKEN3 0x00f0 +#define OMAP3430ES2_PM_WKST3 0x00b8 + #define OMAP3430_PM_MPUGRPSEL 0x00a4 #define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL @@ -153,16 +166,6 @@ #define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc -/* Architecture-specific registers */ - -#define OMAP24XX_PM_WKEN2 0x00a4 -#define OMAP24XX_PM_WKST2 0x00b4 - -#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ -#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ -#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 -#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc - #ifndef __ASSEMBLER__ /* Power/reset management domain register get/set */ @@ -228,7 +231,6 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) #define OMAP_RSTTIME1_SHIFT 0 #define OMAP_RSTTIME1_MASK (0xff << 0) - /* PRM_RSTCTRL */ /* Named RM_RSTCTRL_WKUP on the 24xx */ /* 2420 calls RST_DPLL3 'RST_DPLL' */ diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c new file mode 100644 index 00000000000..2a30060cb4b --- /dev/null +++ b/arch/arm/mach-omap2/sdrc.c @@ -0,0 +1,93 @@ +/* + * SMS/SDRC (SDRAM controller) common code for OMAP2/3 + * + * Copyright (C) 2005, 2008 Texas Instruments Inc. + * Copyright (C) 2005, 2008 Nokia Corporation + * + * Tony Lindgren <tony@atomide.com> + * Paul Walmsley + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/common.h> +#include <mach/clock.h> +#include <mach/sram.h> + +#include "prm.h" + +#include <mach/sdrc.h> +#include "sdrc.h" + +static struct omap_sdrc_params *sdrc_init_params; + +void __iomem *omap2_sdrc_base; +void __iomem *omap2_sms_base; + + +/** + * omap2_sdrc_get_params - return SDRC register values for a given clock rate + * @r: SDRC clock rate (in Hz) + * + * Return pre-calculated values for the SDRC_ACTIM_CTRLA, + * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given + * SDRC clock rate 'r'. These parameters control various timing + * delays in the SDRAM controller that are expressed in terms of the + * number of SDRC clock cycles to wait; hence the clock rate + * dependency. Note that sdrc_init_params must be sorted rate + * descending. Also assumes that both chip-selects use the same + * timing parameters. Returns a struct omap_sdrc_params * upon + * success, or NULL upon failure. + */ +struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) +{ + struct omap_sdrc_params *sp; + + sp = sdrc_init_params; + + while (sp->rate != r) + sp++; + + if (!sp->rate) + return NULL; + + return sp; +} + + +void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) +{ + omap2_sdrc_base = omap2_globals->sdrc; + omap2_sms_base = omap2_globals->sms; +} + +/* turn on smart idle modes for SDRAM scheduler and controller */ +void __init omap2_sdrc_init(struct omap_sdrc_params *sp) +{ + u32 l; + + l = sms_read_reg(SMS_SYSCONFIG); + l &= ~(0x3 << 3); + l |= (0x2 << 3); + sms_write_reg(l, SMS_SYSCONFIG); + + l = sdrc_read_reg(SDRC_SYSCONFIG); + l &= ~(0x3 << 3); + l |= (0x2 << 3); + sdrc_write_reg(l, SDRC_SYSCONFIG); + + sdrc_init_params = sp; +} diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/sdrc2xxx.c index 882c7022429..0afdad5ae9f 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -1,13 +1,14 @@ /* - * linux/arch/arm/mach-omap2/memory.c + * linux/arch/arm/mach-omap2/sdrc2xxx.c * - * Memory timing related functions for OMAP24XX + * SDRAM timing related functions for OMAP2xxx * - * Copyright (C) 2005 Texas Instruments Inc. - * Richard Woodruff <r-woodruff2@ti.com> + * Copyright (C) 2005, 2008 Texas Instruments Inc. + * Copyright (C) 2005, 2008 Nokia Corporation * - * Copyright (C) 2005 Nokia Corporation * Tony Lindgren <tony@atomide.com> + * Paul Walmsley + * Richard Woodruff <r-woodruff2@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -28,27 +29,31 @@ #include <mach/sram.h> #include "prm.h" - -#include "memory.h" +#include "clock.h" +#include <mach/sdrc.h> #include "sdrc.h" -void __iomem *omap2_sdrc_base; -void __iomem *omap2_sms_base; +/* Memory timing, DLL mode flags */ +#define M_DDR 1 +#define M_LOCK_CTRL (1 << 2) +#define M_UNLOCK 0 +#define M_LOCK 1 + static struct memory_timings mem_timings; static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2; -u32 omap2_memory_get_slow_dll_ctrl(void) +static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void) { return mem_timings.slow_dll_ctrl; } -u32 omap2_memory_get_fast_dll_ctrl(void) +static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void) { return mem_timings.fast_dll_ctrl; } -u32 omap2_memory_get_type(void) +static u32 omap2xxx_sdrc_get_type(void) { return mem_timings.m_type; } @@ -57,7 +62,7 @@ u32 omap2_memory_get_type(void) * Check the DLL lock state, and return tue if running in unlock mode. * This is needed to compensate for the shifted DLL value in unlock mode. */ -u32 omap2_dll_force_needed(void) +u32 omap2xxx_sdrc_dll_is_unlocked(void) { /* dlla and dllb are a set */ u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL); @@ -72,8 +77,10 @@ u32 omap2_dll_force_needed(void) * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC. * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2) + * + * Used by the clock framework during CORE DPLL changes */ -u32 omap2_reprogram_sdrc(u32 level, u32 force) +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) { u32 dll_ctrl, m_type; u32 prev = curr_perf_level; @@ -82,15 +89,14 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force) if ((curr_perf_level == level) && !force) return prev; - if (level == CORE_CLK_SRC_DPLL) { - dll_ctrl = omap2_memory_get_slow_dll_ctrl(); - } else if (level == CORE_CLK_SRC_DPLL_X2) { - dll_ctrl = omap2_memory_get_fast_dll_ctrl(); - } else { + if (level == CORE_CLK_SRC_DPLL) + dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl(); + else if (level == CORE_CLK_SRC_DPLL_X2) + dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl(); + else return prev; - } - m_type = omap2_memory_get_type(); + m_type = omap2xxx_sdrc_get_type(); local_irq_save(flags); __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP); @@ -101,23 +107,14 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force) return prev; } -#if !defined(CONFIG_ARCH_OMAP2) -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ -} -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type) -{ -} -#endif - -void omap2_init_memory_params(u32 force_lock_to_unlock_mode) +/* Used by the clock framework during CORE DPLL changes */ +void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode) { unsigned long dll_cnt; u32 fast_dll = 0; - mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ + /* DDR = 1, SDR = 0 */ + mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. * In the case of 2422, its ok to use CS1 instead of CS0. @@ -164,28 +161,3 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode) /* 90 degree phase for anything below 133Mhz + disable DLL filter */ mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); } - -void __init omap2_set_globals_memory(struct omap_globals *omap2_globals) -{ - omap2_sdrc_base = omap2_globals->sdrc; - omap2_sms_base = omap2_globals->sms; -} - -/* turn on smart idle modes for SDRAM scheduler and controller */ -void __init omap2_init_memory(void) -{ - u32 l; - - if (!cpu_is_omap2420()) - return; - - l = sms_read_reg(SMS_SYSCONFIG); - l &= ~(0x3 << 3); - l |= (0x2 << 3); - sms_write_reg(l, SMS_SYSCONFIG); - - l = sdrc_read_reg(SDRC_SYSCONFIG); - l &= ~(0x3 << 3); - l |= (0x2 << 3); - sdrc_write_reg(l, SDRC_SYSCONFIG); -} diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c new file mode 100644 index 00000000000..fc74e913c41 --- /dev/null +++ b/arch/arm/mach-omap2/usb-musb.c @@ -0,0 +1,187 @@ +/* + * linux/arch/arm/mach-omap2/usb-musb.c + * + * This file will contain the board specific details for the + * MENTOR USB OTG controller on OMAP3430 + * + * Copyright (C) 2007-2008 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Author: Vikram Pandita + * + * Generalization by: + * Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> + +#include <linux/usb/musb.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/pm.h> +#include <mach/mux.h> +#include <mach/usb.h> + +static struct resource musb_resources[] = { + [0] = { /* start and end set dynamically */ + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = INT_243X_HS_USB_MC, + .flags = IORESOURCE_IRQ, + }, + [2] = { /* DMA IRQ */ + .start = INT_243X_HS_USB_DMA, + .flags = IORESOURCE_IRQ, + }, +}; + +static int clk_on; + +static int musb_set_clock(struct clk *clk, int state) +{ + if (state) { + if (clk_on > 0) + return -ENODEV; + + clk_enable(clk); + clk_on = 1; + } else { + if (clk_on == 0) + return -ENODEV; + + clk_disable(clk); + clk_on = 0; + } + + return 0; +} + +static struct musb_hdrc_eps_bits musb_eps[] = { + { "ep1_tx", 10, }, + { "ep1_rx", 10, }, + { "ep2_tx", 9, }, + { "ep2_rx", 9, }, + { "ep3_tx", 3, }, + { "ep3_rx", 3, }, + { "ep4_tx", 3, }, + { "ep4_rx", 3, }, + { "ep5_tx", 3, }, + { "ep5_rx", 3, }, + { "ep6_tx", 3, }, + { "ep6_rx", 3, }, + { "ep7_tx", 3, }, + { "ep7_rx", 3, }, + { "ep8_tx", 2, }, + { "ep8_rx", 2, }, + { "ep9_tx", 2, }, + { "ep9_rx", 2, }, + { "ep10_tx", 2, }, + { "ep10_rx", 2, }, + { "ep11_tx", 2, }, + { "ep11_rx", 2, }, + { "ep12_tx", 2, }, + { "ep12_rx", 2, }, + { "ep13_tx", 2, }, + { "ep13_rx", 2, }, + { "ep14_tx", 2, }, + { "ep14_rx", 2, }, + { "ep15_tx", 2, }, + { "ep15_rx", 2, }, +}; + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .soft_con = 1, + .dma = 1, + .num_eps = 16, + .dma_channels = 7, + .dma_req_chan = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3), + .ram_bits = 12, + .eps_bits = musb_eps, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#ifdef CONFIG_USB_MUSB_OTG + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + /* .clock is set dynamically */ + .set_clock = musb_set_clock, + .config = &musb_config, + + /* REVISIT charge pump on TWL4030 can supply up to + * 100 mA ... but this value is board-specific, like + * "mode", and should be passed to usb_musb_init(). + */ + .power = 50, /* up to 100 mA */ +}; + +static u64 musb_dmamask = DMA_32BIT_MASK; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = -1, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; + +#ifdef CONFIG_NOP_USB_XCEIV +static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; + +static struct platform_device nop_xceiv_device = { + .name = "nop_usb_xceiv", + .id = -1, + .dev = { + .dma_mask = &nop_xceiv_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = NULL, + }, +}; +#endif + +void __init usb_musb_init(void) +{ + if (cpu_is_omap243x()) + musb_resources[0].start = OMAP243X_HS_BASE; + else + musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE; + musb_resources[0].end = musb_resources[0].start + SZ_8K - 1; + + /* + * REVISIT: This line can be removed once all the platforms using + * musb_core.c have been converted to use use clkdev. + */ + musb_plat.clock = "ick"; + +#ifdef CONFIG_NOP_USB_XCEIV + if (platform_device_register(&nop_xceiv_device) < 0) { + printk(KERN_ERR "Unable to register NOP-XCEIV device\n"); + return; + } +#endif + + if (platform_device_register(&musb_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); + return; + } +} diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index f59a8d0e082..2c7035d8dcb 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -71,6 +71,7 @@ config MACH_WRT350N_V2 config MACH_TS78XX bool "Technologic Systems TS-78xx" + select PM help Say 'Y' here if you want your kernel to support the Technologic Systems TS-78xx platform. diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 8a0e49d8425..68cc3efae56 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -31,6 +31,7 @@ #include <plat/ehci-orion.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> +#include <plat/orion5x_wdt.h> #include <plat/time.h> #include "common.h" @@ -219,14 +220,17 @@ static struct platform_device orion5x_switch_device = { void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq) { + int i; + if (irq != NO_IRQ) { orion5x_switch_resources[0].start = irq; orion5x_switch_resources[0].end = irq; orion5x_switch_device.num_resources = 1; } - d->mii_bus = &orion5x_eth_shared.dev; d->netdev = &orion5x_eth.dev; + for (i = 0; i < d->nr_chips; i++) + d->chip[i].mii_bus = &orion5x_eth_shared.dev; orion5x_switch_device.dev.platform_data = d; platform_device_register(&orion5x_switch_device); @@ -533,6 +537,29 @@ void __init orion5x_xor_init(void) /***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct orion5x_wdt_platform_data orion5x_wdt_data = { + .tclk = 0, +}; + +static struct platform_device orion5x_wdt_device = { + .name = "orion5x_wdt", + .id = -1, + .dev = { + .platform_data = &orion5x_wdt_data, + }, + .num_resources = 0, +}; + +void __init orion5x_wdt_init(void) +{ + orion5x_wdt_data.tclk = orion5x_tclk; + platform_device_register(&orion5x_wdt_device); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ int orion5x_tclk; @@ -631,6 +658,11 @@ void __init orion5x_init(void) printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); disable_hlt(); } + + /* + * Register watchdog driver + */ + orion5x_wdt_init(); } /* diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 0722d6510df..b31ca4cef36 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -76,7 +76,7 @@ static int __init dns323_dev_id(void) static int __init dns323_pci_init(void) { - /* The 5182 doesn't really use it's PCI bus, and initialising PCI + /* The 5182 doesn't really use its PCI bus, and initialising PCI * gets in the way of initialising the SATA controller. */ if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID) @@ -418,7 +418,7 @@ static void __init dns323_init(void) orion5x_i2c_init(); orion5x_uart0_init(); - /* The 5182 has it's SATA controller on-chip, and needs it's own little + /* The 5182 has its SATA controller on-chip, and needs its own little * init routine. */ if (dns323_dev_id() == MV88F5182_DEV_ID) diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index 08e43075789..9b8db1dcfa8 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -19,7 +19,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { /* * Enable and issue soft reset diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index e0c43b8beb7..c9bf6b81a80 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = { static void lsmini_power_off(void) { - arch_reset(0); + arch_reset(0, NULL); } diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 15f53235ee3..9c1ca41730b 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -94,7 +94,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { .duplex = DUPLEX_FULL, }; -static struct dsa_platform_data rd88f5181l_fxo_switch_data = { +static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = { .port_names[0] = "lan2", .port_names[1] = "lan1", .port_names[2] = "wan", @@ -103,6 +103,11 @@ static struct dsa_platform_data rd88f5181l_fxo_switch_data = { .port_names[7] = "lan3", }; +static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = { + .nr_chips = 1, + .chip = &rd88f5181l_fxo_switch_chip_data, +}; + static void __init rd88f5181l_fxo_init(void) { /* @@ -117,7 +122,7 @@ static void __init rd88f5181l_fxo_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_fxo_eth_data); - orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ); + orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 8ad3934399d..ee1399ff0ce 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -95,7 +95,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { .duplex = DUPLEX_FULL, }; -static struct dsa_platform_data rd88f5181l_ge_switch_data = { +static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = { .port_names[0] = "lan2", .port_names[1] = "lan1", .port_names[2] = "wan", @@ -104,6 +104,11 @@ static struct dsa_platform_data rd88f5181l_ge_switch_data = { .port_names[7] = "lan3", }; +static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &rd88f5181l_ge_switch_chip_data, +}; + static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { I2C_BOARD_INFO("ds1338", 0x68), }; @@ -122,7 +127,8 @@ static void __init rd88f5181l_ge_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_ge_eth_data); - orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8)); + orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data, + gpio_to_irq(8)); orion5x_i2c_init(); orion5x_uart0_init(); diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index 262e25e4dac..7737cf9a8f5 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -35,7 +35,7 @@ static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = { .duplex = DUPLEX_FULL, }; -static struct dsa_platform_data rd88f6183ap_ge_switch_data = { +static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = { .port_names[0] = "lan1", .port_names[1] = "lan2", .port_names[2] = "lan3", @@ -44,6 +44,11 @@ static struct dsa_platform_data rd88f6183ap_ge_switch_data = { .port_names[5] = "cpu", }; +static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = { + .nr_chips = 1, + .chip = &rd88f6183ap_ge_switch_chip_data, +}; + static struct mtd_partition rd88f6183ap_ge_partitions[] = { { .name = "kernel", @@ -89,7 +94,8 @@ static void __init rd88f6183ap_ge_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f6183ap_ge_eth_data); - orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3)); + orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data, + gpio_to_irq(3)); spi_register_board_info(rd88f6183ap_ge_spi_slave_info, ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info)); orion5x_spi_init(); diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h new file mode 100644 index 00000000000..0f9cdf45895 --- /dev/null +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h @@ -0,0 +1,35 @@ +#define FPGAID(_magic, _rev) ((_magic << 8) + _rev) + +/* + * get yer id's from http://ts78xx.digriz.org.uk/ + * do *not* make up your own or 'borrow' any! + */ +enum fpga_ids { + /* Technologic Systems */ + TS7800_REV_1 = FPGAID(0x00b480, 0x01), + TS7800_REV_2 = FPGAID(0x00b480, 0x02), + TS7800_REV_3 = FPGAID(0x00b480, 0x03), + TS7800_REV_4 = FPGAID(0x00b480, 0x04), + TS7800_REV_5 = FPGAID(0x00b480, 0x05), + + /* Unaffordable & Expensive */ + UAE_DUMMY = FPGAID(0xffffff, 0x01), +}; + +struct fpga_device { + unsigned present:1; + unsigned init:1; +}; + +struct fpga_devices { + /* Technologic Systems */ + struct fpga_device ts_rtc; + struct fpga_device ts_nand; +}; + +struct ts78xx_fpga_data { + unsigned int id; + int state; + + struct fpga_devices supports; +}; diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 1368e9fd1a0..9a6b397f972 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -10,17 +10,20 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sysfs.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> #include <linux/m48t86.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" +#include "ts78xx-fpga.h" /***************************************************************************** * TS-78xx Info @@ -33,18 +36,11 @@ #define TS78XX_FPGA_REGS_VIRT_BASE 0xff900000 #define TS78XX_FPGA_REGS_SIZE SZ_1M -#define TS78XX_FPGA_REGS_SYSCON_ID (TS78XX_FPGA_REGS_VIRT_BASE | 0x000) -#define TS78XX_FPGA_REGS_SYSCON_LCDI (TS78XX_FPGA_REGS_VIRT_BASE | 0x004) -#define TS78XX_FPGA_REGS_SYSCON_LCDO (TS78XX_FPGA_REGS_VIRT_BASE | 0x008) - -#define TS78XX_FPGA_REGS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808) -#define TS78XX_FPGA_REGS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c) - -/* - * 512kB NOR flash Device - */ -#define TS78XX_NOR_BOOT_BASE 0xff800000 -#define TS78XX_NOR_BOOT_SIZE SZ_512K +static struct ts78xx_fpga_data ts78xx_fpga = { + .id = 0, + .state = 1, +/* .supports = ... - populated by ts78xx_fpga_supports() */ +}; /***************************************************************************** * I/O Address Mapping @@ -65,73 +61,47 @@ void __init ts78xx_map_io(void) } /***************************************************************************** - * 512kB NOR Boot Flash - the chip is a M25P40 + * Ethernet ****************************************************************************/ -static struct mtd_partition ts78xx_nor_boot_flash_resources[] = { - { - .name = "ts-bootrom", - .offset = 0, - /* only the first 256kB is used */ - .size = SZ_256K, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data ts78xx_nor_boot_flash_data = { - .width = 1, - .parts = ts78xx_nor_boot_flash_resources, - .nr_parts = ARRAY_SIZE(ts78xx_nor_boot_flash_resources), -}; - -static struct resource ts78xx_nor_boot_flash_resource = { - .flags = IORESOURCE_MEM, - .start = TS78XX_NOR_BOOT_BASE, - .end = TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device ts78xx_nor_boot_flash = { - .name = "physmap-flash", - .id = -1, - .dev = { - .platform_data = &ts78xx_nor_boot_flash_data, - }, - .num_resources = 1, - .resource = &ts78xx_nor_boot_flash_resource, +static struct mv643xx_eth_platform_data ts78xx_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; /***************************************************************************** - * Ethernet + * SATA ****************************************************************************/ -static struct mv643xx_eth_platform_data ts78xx_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), +static struct mv_sata_platform_data ts78xx_sata_data = { + .n_ports = 2, }; /***************************************************************************** * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c ****************************************************************************/ -#ifdef CONFIG_RTC_DRV_M48T86 -static unsigned char ts78xx_rtc_readbyte(unsigned long addr) +#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808) +#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c) + +static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr) { - writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL); - return readb(TS78XX_FPGA_REGS_RTC_DATA); + writeb(addr, TS_RTC_CTRL); + return readb(TS_RTC_DATA); } -static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr) +static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr) { - writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL); - writeb(value, TS78XX_FPGA_REGS_RTC_DATA); + writeb(addr, TS_RTC_CTRL); + writeb(value, TS_RTC_DATA); } -static struct m48t86_ops ts78xx_rtc_ops = { - .readbyte = ts78xx_rtc_readbyte, - .writebyte = ts78xx_rtc_writebyte, +static struct m48t86_ops ts78xx_ts_rtc_ops = { + .readbyte = ts78xx_ts_rtc_readbyte, + .writebyte = ts78xx_ts_rtc_writebyte, }; -static struct platform_device ts78xx_rtc_device = { +static struct platform_device ts78xx_ts_rtc_device = { .name = "rtc-m48t86", .id = -1, .dev = { - .platform_data = &ts78xx_rtc_ops, + .platform_data = &ts78xx_ts_rtc_ops, }, .num_resources = 0, }; @@ -146,59 +116,314 @@ static struct platform_device ts78xx_rtc_device = { * TODO: track down a guinea pig without an RTC to see if we can work out a * better RTC detection routine */ -static int __init ts78xx_rtc_init(void) +static int ts78xx_ts_rtc_load(void) { + int rc; unsigned char tmp_rtc0, tmp_rtc1; - tmp_rtc0 = ts78xx_rtc_readbyte(126); - tmp_rtc1 = ts78xx_rtc_readbyte(127); - - ts78xx_rtc_writebyte(0x00, 126); - ts78xx_rtc_writebyte(0x55, 127); - if (ts78xx_rtc_readbyte(127) == 0x55) { - ts78xx_rtc_writebyte(0xaa, 127); - if (ts78xx_rtc_readbyte(127) == 0xaa - && ts78xx_rtc_readbyte(126) == 0x00) { - ts78xx_rtc_writebyte(tmp_rtc0, 126); - ts78xx_rtc_writebyte(tmp_rtc1, 127); - platform_device_register(&ts78xx_rtc_device); - return 1; + tmp_rtc0 = ts78xx_ts_rtc_readbyte(126); + tmp_rtc1 = ts78xx_ts_rtc_readbyte(127); + + ts78xx_ts_rtc_writebyte(0x00, 126); + ts78xx_ts_rtc_writebyte(0x55, 127); + if (ts78xx_ts_rtc_readbyte(127) == 0x55) { + ts78xx_ts_rtc_writebyte(0xaa, 127); + if (ts78xx_ts_rtc_readbyte(127) == 0xaa + && ts78xx_ts_rtc_readbyte(126) == 0x00) { + ts78xx_ts_rtc_writebyte(tmp_rtc0, 126); + ts78xx_ts_rtc_writebyte(tmp_rtc1, 127); + + if (ts78xx_fpga.supports.ts_rtc.init == 0) { + rc = platform_device_register(&ts78xx_ts_rtc_device); + if (!rc) + ts78xx_fpga.supports.ts_rtc.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_rtc_device); + + return rc; } } - return 0; + return -ENODEV; }; -#else -static int __init ts78xx_rtc_init(void) + +static void ts78xx_ts_rtc_unload(void) { - return 0; + platform_device_del(&ts78xx_ts_rtc_device); } -#endif /***************************************************************************** - * SATA + * NAND Flash ****************************************************************************/ -static struct mv_sata_platform_data ts78xx_sata_data = { - .n_ports = 2, +#define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x800) /* VIRT */ +#define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x804) /* PHYS */ + +/* + * hardware specific access to control-lines + * + * ctrl: + * NAND_NCE: bit 0 -> bit 2 + * NAND_CLE: bit 1 -> bit 1 + * NAND_ALE: bit 2 -> bit 0 + */ +static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char bits; + + bits = (ctrl & NAND_NCE) << 2; + bits |= ctrl & NAND_CLE; + bits |= (ctrl & NAND_ALE) >> 2; + + writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) +{ + return readb(TS_NAND_CTRL) & 0x20; +} + +const char *ts_nand_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition ts78xx_ts_nand_parts[] = { + { + .name = "mbr", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, { + .name = "initrd", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } }; +static struct platform_nand_data ts78xx_ts_nand_data = { + .chip = { + .part_probe_types = ts_nand_part_probes, + .partitions = ts78xx_ts_nand_parts, + .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), + .chip_delay = 15, + .options = NAND_USE_FLASH_BBT, + }, + .ctrl = { + /* + * The HW ECC offloading functions, used to give about a 9% + * performance increase for 'dd if=/dev/mtdblockX' and 5% for + * nanddump. This all however was changed by git commit + * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is + * no performance advantage to be had so we no longer bother + */ + .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl, + .dev_ready = ts78xx_ts_nand_dev_ready, + }, +}; + +static struct resource ts78xx_ts_nand_resources = { + .start = TS_NAND_DATA, + .end = TS_NAND_DATA + 4, + .flags = IORESOURCE_IO, +}; + +static struct platform_device ts78xx_ts_nand_device = { + .name = "gen_nand", + .id = -1, + .dev = { + .platform_data = &ts78xx_ts_nand_data, + }, + .resource = &ts78xx_ts_nand_resources, + .num_resources = 1, +}; + +static int ts78xx_ts_nand_load(void) +{ + int rc; + + if (ts78xx_fpga.supports.ts_nand.init == 0) { + rc = platform_device_register(&ts78xx_ts_nand_device); + if (!rc) + ts78xx_fpga.supports.ts_nand.init = 1; + } else + rc = platform_device_add(&ts78xx_ts_nand_device); + + return rc; +}; + +static void ts78xx_ts_nand_unload(void) +{ + platform_device_del(&ts78xx_ts_nand_device); +} + /***************************************************************************** - * print some information regarding the board + * FPGA 'hotplug' support code ****************************************************************************/ -static void __init ts78xx_print_board_id(void) +static void ts78xx_fpga_devices_zero_init(void) { - unsigned int board_info; - - board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID); - printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ", - board_info & 0xff, - (board_info >> 8) & 0xffffff); - board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI); - printk("JP1=%d, JP2=%d\n", - (board_info >> 30) & 0x1, - (board_info >> 31) & 0x1); + ts78xx_fpga.supports.ts_rtc.init = 0; + ts78xx_fpga.supports.ts_nand.init = 0; +} + +static void ts78xx_fpga_supports(void) +{ + /* TODO: put this 'table' into ts78xx-fpga.h */ + switch (ts78xx_fpga.id) { + case TS7800_REV_1: + case TS7800_REV_2: + case TS7800_REV_3: + case TS7800_REV_4: + case TS7800_REV_5: + ts78xx_fpga.supports.ts_rtc.present = 1; + ts78xx_fpga.supports.ts_nand.present = 1; + break; + default: + ts78xx_fpga.supports.ts_rtc.present = 0; + ts78xx_fpga.supports.ts_nand.present = 0; + } +} + +static int ts78xx_fpga_load_devices(void) +{ + int tmp, ret = 0; + + if (ts78xx_fpga.supports.ts_rtc.present == 1) { + tmp = ts78xx_ts_rtc_load(); + if (tmp) { + printk(KERN_INFO "TS-78xx: RTC not registered\n"); + ts78xx_fpga.supports.ts_rtc.present = 0; + } + ret |= tmp; + } + if (ts78xx_fpga.supports.ts_nand.present == 1) { + tmp = ts78xx_ts_nand_load(); + if (tmp) { + printk(KERN_INFO "TS-78xx: NAND not registered\n"); + ts78xx_fpga.supports.ts_nand.present = 0; + } + ret |= tmp; + } + + return ret; +} + +static int ts78xx_fpga_unload_devices(void) +{ + int ret = 0; + + if (ts78xx_fpga.supports.ts_rtc.present == 1) + ts78xx_ts_rtc_unload(); + if (ts78xx_fpga.supports.ts_nand.present == 1) + ts78xx_ts_nand_unload(); + + return ret; +} + +static int ts78xx_fpga_load(void) +{ + ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); + + printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", + (ts78xx_fpga.id >> 8) & 0xffffff, + ts78xx_fpga.id & 0xff); + + ts78xx_fpga_supports(); + + if (ts78xx_fpga_load_devices()) { + ts78xx_fpga.state = -1; + return -EBUSY; + } + + return 0; }; +static int ts78xx_fpga_unload(void) +{ + unsigned int fpga_id; + + fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE); + + /* + * There does not seem to be a feasible way to block access to the GPIO + * pins from userspace (/dev/mem). This if clause should hopefully warn + * those foolish enough not to follow 'policy' :) + * + * UrJTAG SVN since r1381 can be used to reprogram the FPGA + */ + if (ts78xx_fpga.id != fpga_id) { + printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n" + "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", + (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, + (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); + ts78xx_fpga.state = -1; + return -EBUSY; + } + + if (ts78xx_fpga_unload_devices()) { + ts78xx_fpga.state = -1; + return -EBUSY; + } + + return 0; +}; + +static ssize_t ts78xx_fpga_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + if (ts78xx_fpga.state < 0) + return sprintf(buf, "borked\n"); + + return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline"); +} + +static ssize_t ts78xx_fpga_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t n) +{ + int value, ret; + + if (ts78xx_fpga.state < 0) { + printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n"); + return -EBUSY; + } + + if (strncmp(buf, "online", sizeof("online") - 1) == 0) + value = 1; + else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) + value = 0; + else { + printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n"); + return -EINVAL; + } + + if (ts78xx_fpga.state == value) + return n; + + ret = (ts78xx_fpga.state == 0) + ? ts78xx_fpga_load() + : ts78xx_fpga_unload(); + + if (!(ret < 0)) + ts78xx_fpga.state = value; + + return n; +} + +static struct kobj_attribute ts78xx_fpga_attr = + __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store); + /***************************************************************************** * General Setup ****************************************************************************/ @@ -223,30 +448,29 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { { 17, MPP_UART }, { 18, MPP_UART }, { 19, MPP_UART }, + /* + * MPP[20] PCI Clock Out 1 + * MPP[21] PCI Clock Out 0 + * MPP[22] Unused + * MPP[23] Unused + * MPP[24] Unused + * MPP[25] Unused + */ { -1 }, }; static void __init ts78xx_init(void) { + int ret; + /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); - ts78xx_print_board_id(); - orion5x_mpp_conf(ts78xx_mpp_modes); /* - * MPP[20] PCI Clock Out 1 - * MPP[21] PCI Clock Out 0 - * MPP[22] Unused - * MPP[23] Unused - * MPP[24] Unused - * MPP[25] Unused - */ - - /* * Configure peripherals. */ orion5x_ehci0_init(); @@ -257,12 +481,12 @@ static void __init ts78xx_init(void) orion5x_uart1_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE, - TS78XX_NOR_BOOT_SIZE); - platform_device_register(&ts78xx_nor_boot_flash); - - if (!ts78xx_rtc_init()) - printk(KERN_INFO "TS-78xx RTC not detected or enabled\n"); + /* FPGA init */ + ts78xx_fpga_devices_zero_init(); + ret = ts78xx_fpga_load(); + ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr); + if (ret) + printk(KERN_ERR "sysfs_create_file failed: %d\n", ret); } MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index cc8f8920086..1b4ad9d5e2e 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -106,7 +106,7 @@ static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = { .duplex = DUPLEX_FULL, }; -static struct dsa_platform_data wrt350n_v2_switch_data = { +static struct dsa_chip_data wrt350n_v2_switch_chip_data = { .port_names[0] = "lan2", .port_names[1] = "lan1", .port_names[2] = "wan", @@ -115,6 +115,11 @@ static struct dsa_platform_data wrt350n_v2_switch_data = { .port_names[7] = "lan4", }; +static struct dsa_platform_data wrt350n_v2_switch_plat_data = { + .nr_chips = 1, + .chip = &wrt350n_v2_switch_chip_data, +}; + static void __init wrt350n_v2_init(void) { /* @@ -129,7 +134,7 @@ static void __init wrt350n_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&wrt350n_v2_eth_data); - orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ); + orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h index e12e7abfcbc..5dda2bb55f8 100644 --- a/arch/arm/mach-pnx4008/include/mach/system.h +++ b/arch/arm/mach-pnx4008/include/mach/system.h @@ -30,7 +30,7 @@ static void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { cpu_reset(0); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8eea7306f29..96a2006cb59 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -40,6 +40,9 @@ choice config GUMSTIX_AM200EPD bool "Enable AM200EPD board support" +config GUMSTIX_AM300EPD + bool "Enable AM300EPD board support" + endchoice config MACH_INTELMOTE2 @@ -254,10 +257,24 @@ config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x +config MACH_EXEDA + bool "CompuLab eXeda platform" + select PXA27x + config MACH_COLIBRI - bool "Toradex Colibri PX27x" + bool "Toradex Colibri PXA270" select PXA27x +config MACH_COLIBRI300 + bool "Toradex Colibri PXA300/310" + select PXA3xx + select CPU_PXA300 + +config MACH_COLIBRI320 + bool "Toradex Colibri PXA320" + select PXA3xx + select CPU_PXA320 + config MACH_ZYLONITE bool "PXA3xx Development Platform (aka Zylonite)" select PXA3xx @@ -295,8 +312,15 @@ config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT + select PXA_SSP + select HAVE_PWM select PXA_HAVE_BOARD_IRQS +config MACH_HIMALAYA + bool "HTC Himalaya Support" + select CPU_PXA26x + select FB_W100 + config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x @@ -319,6 +343,16 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALMT5 + bool "Palm Tungsten|T5" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm Tungsten|T5 + handheld computer. + config MACH_PALMTX bool "Palm T|X" default y @@ -339,6 +373,16 @@ config MACH_PALMZ72 Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. +config MACH_PALMLD + bool "Palm LifeDrive" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm LifeDrive + handheld computer. + config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM @@ -359,6 +403,18 @@ config PCM990_DISPLAY_NONE endchoice +config MACH_CSB726 + bool "Enable Cogent CSB726 System On a Module" + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Cogent + CSB726 System On Module. + +config CSB726_CSB701 + bool "Enable supprot for CSB701 baseboard" + depends on MACH_CSB726 + config PXA_EZX bool "Motorola EZX Platform" select PXA27x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 7b28bb561d6..c80e1bac494 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,8 +3,8 @@ # # Common support (must be linked before board specific support) -obj-y += clock.o devices.o generic.o irq.o dma.o \ - time.o gpio.o reset.o +obj-y += clock.o devices.o generic.o irq.o \ + time.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o ifeq ($(CONFIG_CPU_FREQ),y) @@ -28,13 +28,16 @@ obj-$(CONFIG_CPU_PXA930) += pxa930.o # Specific board support obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o +obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_MACH_MP900C) += mp900.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o -obj-$(CONFIG_MACH_COLIBRI) += colibri.o +obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o +obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o obj-$(CONFIG_MACH_H5000) += h5000.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o @@ -45,6 +48,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o +obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o obj-$(CONFIG_MACH_E330) += e330.o @@ -53,7 +57,9 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o +obj-$(CONFIG_MACH_PALMLD) += palmld.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o obj-$(CONFIG_ARCH_VIPER) += viper.o @@ -71,6 +77,8 @@ obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o +obj-$(CONFIG_MACH_CSB726) += csb726.o +obj-$(CONFIG_CSB726_CSB701) += csb701.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 77ee80e5e47..3499fada73a 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -30,8 +30,8 @@ #include <linux/irq.h> #include <linux/gpio.h> +#include <mach/pxa25x.h> #include <mach/gumstix.h> -#include <mach/mfp-pxa25x.h> #include <mach/pxafb.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c new file mode 100644 index 00000000000..4bd10a17332 --- /dev/null +++ b/arch/arm/mach-pxa/am300epd.c @@ -0,0 +1,295 @@ +/* + * am300epd.c -- Platform device for AM300 EPD kit + * + * Copyright (C) 2008, Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * This work was made possible by help and equipment support from E-Ink + * Corporation. http://support.eink.com/community + * + * This driver is written to be used with the Broadsheet display controller. + * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600 + * Vizplex EPD on a Gumstix board using the Broadsheet interface board. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <mach/gumstix.h> +#include <mach/mfp-pxa25x.h> +#include <mach/pxafb.h> + +#include "generic.h" + +#include <video/broadsheetfb.h> + +static unsigned int panel_type = 6; +static struct platform_device *am300_device; +static struct broadsheet_board am300_board; + +static unsigned long am300_pin_config[] __initdata = { + GPIO16_GPIO, + GPIO17_GPIO, + GPIO32_GPIO, + GPIO48_GPIO, + GPIO49_GPIO, + GPIO51_GPIO, + GPIO74_GPIO, + GPIO75_GPIO, + GPIO76_GPIO, + GPIO77_GPIO, + + /* this is the 16-bit hdb bus 58-73 */ + GPIO58_GPIO, + GPIO59_GPIO, + GPIO60_GPIO, + GPIO61_GPIO, + + GPIO62_GPIO, + GPIO63_GPIO, + GPIO64_GPIO, + GPIO65_GPIO, + + GPIO66_GPIO, + GPIO67_GPIO, + GPIO68_GPIO, + GPIO69_GPIO, + + GPIO70_GPIO, + GPIO71_GPIO, + GPIO72_GPIO, + GPIO73_GPIO, +}; + +/* register offsets for gpio control */ +#define PWR_GPIO_PIN 16 +#define CFG_GPIO_PIN 17 +#define RDY_GPIO_PIN 32 +#define DC_GPIO_PIN 48 +#define RST_GPIO_PIN 49 +#define LED_GPIO_PIN 51 +#define RD_GPIO_PIN 74 +#define WR_GPIO_PIN 75 +#define CS_GPIO_PIN 76 +#define IRQ_GPIO_PIN 77 + +/* hdb bus */ +#define DB0_GPIO_PIN 58 +#define DB15_GPIO_PIN 73 + +static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN, + RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN, + IRQ_GPIO_PIN, LED_GPIO_PIN }; +static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR", + "CS", "IRQ", "LED" }; + +static int am300_wait_event(struct broadsheetfb_par *par) +{ + /* todo: improve err recovery */ + wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN)); + return 0; +} + +static int am300_init_gpio_regs(struct broadsheetfb_par *par) +{ + int i; + int err; + char dbname[8]; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + err = gpio_request(gpios[i], gpio_names[i]); + if (err) { + dev_err(&am300_device->dev, "failed requesting " + "gpio %s, err=%d\n", gpio_names[i], err); + goto err_req_gpio; + } + } + + /* we also need to take care of the hdb bus */ + for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) { + sprintf(dbname, "DB%d", i); + err = gpio_request(i, dbname); + if (err) { + dev_err(&am300_device->dev, "failed requesting " + "gpio %d, err=%d\n", i, err); + while (i >= DB0_GPIO_PIN) + gpio_free(i--); + i = ARRAY_SIZE(gpios) - 1; + goto err_req_gpio; + } + } + + /* setup the outputs and init values */ + gpio_direction_output(PWR_GPIO_PIN, 0); + gpio_direction_output(CFG_GPIO_PIN, 1); + gpio_direction_output(DC_GPIO_PIN, 0); + gpio_direction_output(RD_GPIO_PIN, 1); + gpio_direction_output(WR_GPIO_PIN, 1); + gpio_direction_output(CS_GPIO_PIN, 1); + gpio_direction_output(RST_GPIO_PIN, 0); + + /* setup the inputs */ + gpio_direction_input(RDY_GPIO_PIN); + gpio_direction_input(IRQ_GPIO_PIN); + + /* start the hdb bus as an input */ + for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) + gpio_direction_output(i, 0); + + /* go into command mode */ + gpio_set_value(CFG_GPIO_PIN, 1); + gpio_set_value(RST_GPIO_PIN, 0); + msleep(10); + gpio_set_value(RST_GPIO_PIN, 1); + msleep(10); + am300_wait_event(par); + + return 0; + +err_req_gpio: + while (i > 0) + gpio_free(gpios[i--]); + + return err; +} + +static int am300_init_board(struct broadsheetfb_par *par) +{ + return am300_init_gpio_regs(par); +} + +static void am300_cleanup(struct broadsheetfb_par *par) +{ + int i; + + free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + + for (i = 0; i < ARRAY_SIZE(gpios); i++) + gpio_free(gpios[i]); + + for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) + gpio_free(i); + +} + +static u16 am300_get_hdb(struct broadsheetfb_par *par) +{ + u16 res = 0; + int i; + + for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++) + res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0; + + return res; +} + +static void am300_set_hdb(struct broadsheetfb_par *par, u16 data) +{ + int i; + + for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++) + gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01); +} + + +static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit, + u8 state) +{ + switch (bit) { + case BS_CS: + gpio_set_value(CS_GPIO_PIN, state); + break; + case BS_DC: + gpio_set_value(DC_GPIO_PIN, state); + break; + case BS_WR: + gpio_set_value(WR_GPIO_PIN, state); + break; + } +} + +static int am300_get_panel_type(void) +{ + return panel_type; +} + +static irqreturn_t am300_handle_irq(int irq, void *dev_id) +{ + struct broadsheetfb_par *par = dev_id; + + wake_up(&par->waitq); + return IRQ_HANDLED; +} + +static int am300_setup_irq(struct fb_info *info) +{ + int ret; + struct broadsheetfb_par *par = info->par; + + ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq, + IRQF_DISABLED|IRQF_TRIGGER_RISING, + "AM300", par); + if (ret) + dev_err(&am300_device->dev, "request_irq failed: %d\n", ret); + + return ret; +} + +static struct broadsheet_board am300_board = { + .owner = THIS_MODULE, + .init = am300_init_board, + .cleanup = am300_cleanup, + .set_hdb = am300_set_hdb, + .get_hdb = am300_get_hdb, + .set_ctl = am300_set_ctl, + .wait_for_rdy = am300_wait_event, + .get_panel_type = am300_get_panel_type, + .setup_irq = am300_setup_irq, +}; + +int __init am300_init(void) +{ + int ret; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config)); + + /* request our platform independent driver */ + request_module("broadsheetfb"); + + am300_device = platform_device_alloc("broadsheetfb", -1); + if (!am300_device) + return -ENOMEM; + + /* the am300_board that will be seen by broadsheetfb is a copy */ + platform_device_add_data(am300_device, &am300_board, + sizeof(am300_board)); + + ret = platform_device_add(am300_device); + + if (ret) { + platform_device_put(am300_device); + return ret; + } + + return 0; +} + +module_param(panel_type, uint, 0); +MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97"); + +MODULE_DESCRIPTION("board driver for am300 epd kit"); +MODULE_AUTHOR("Jaya Kumar"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index 40b77408451..db52d2c4791 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -87,7 +87,7 @@ void clks_register(struct clk_lookup *clks, size_t num) clkdev_add(&clks[i]); } -int clk_add_alias(char *alias, struct device *alias_dev, char *id, +int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, struct device *dev) { struct clk *r = clk_get(dev, id); @@ -96,7 +96,7 @@ int clk_add_alias(char *alias, struct device *alias_dev, char *id, if (!r) return -ENODEV; - l = clkdev_alloc(r, alias, alias_dev ? dev_name(alias_dev) : NULL); + l = clkdev_alloc(r, alias, alias_dev_name); clk_put(r); if (!l) return -ENODEV; diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 4e9c613c676..5599bceff73 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -69,6 +69,6 @@ extern void clk_pxa3xx_cken_disable(struct clk *); #endif void clks_register(struct clk_lookup *clks, size_t num); -int clk_add_alias(char *alias, struct device *alias_dev, char *id, +int clk_add_alias(const char *alias, const char *alias_name, char *id, struct device *dev); diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index 83a4cdf0817..253fd76142d 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -22,10 +22,8 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/pxa2xx_spi.h> -#include <mach/bitfield.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index df83b97f303..34576ba5f5f 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -17,7 +17,7 @@ #include <linux/rtc-v3020.h> #include <video/mbxfb.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/ohci.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 3156b25f6e9..7873fa3d8fa 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <asm/mach/pci.h> -#include <mach/pxa-regs.h> #include <asm/mach-types.h> #include <asm/hardware/it8152.h> diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index d99fd9e4d88..117b5435f8d 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -22,8 +22,6 @@ #include <asm/mach/map.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> #include <mach/audio.h> #include <mach/pxafb.h> @@ -96,7 +94,7 @@ static struct resource cmx270_dm9000_resource[] = { }; static struct dm9000_plat_data cmx270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY, + .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM, }; static struct platform_device cmx2xx_dm9000_device = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index ff0c577cd1a..a9f48b1cb54 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -28,9 +28,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa300.h> - -#include <mach/hardware.h> +#include <mach/pxa300.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> @@ -162,7 +160,7 @@ static struct resource dm9000_resources[] = { }; static struct dm9000_plat_data cm_x300_dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, + .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, }; static struct platform_device dm9000_device = { diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri-pxa270.c index e8473624427..01bcfaae75b 100644 --- a/arch/arm/mach-pxa/colibri.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -1,7 +1,7 @@ /* - * linux/arch/arm/mach-pxa/colibri.c + * linux/arch/arm/mach-pxa/colibri-pxa270.c * - * Support for Toradex PXA27x based Colibri module + * Support for Toradex PXA270 based Colibri module * Daniel Mack <daniel@caiaq.de> * * This program is free software; you can redistribute it and/or modify @@ -20,6 +20,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -28,20 +29,23 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa27x.h> + +#include <mach/pxa27x.h> #include <mach/colibri.h> #include "generic.h" #include "devices.h" -static unsigned long colibri_pin_config[] __initdata = { +/* + * GPIO configuration + */ +static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = { GPIO78_nCS_2, /* Ethernet CS */ GPIO114_GPIO, /* Ethernet IRQ */ }; /* - * Flash + * NOR flash */ static struct mtd_partition colibri_partitions[] = { { @@ -70,39 +74,40 @@ static struct physmap_flash_data colibri_flash_data[] = { } }; -static struct resource flash_resource = { +static struct resource colibri_pxa270_flash_resource = { .start = PXA_CS0_PHYS, .end = PXA_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device flash_device = { +static struct platform_device colibri_pxa270_flash_device = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = colibri_flash_data, }, - .resource = &flash_resource, + .resource = &colibri_pxa270_flash_resource, .num_resources = 1, }; /* * DM9000 Ethernet */ +#if defined(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { - .start = COLIBRI_ETH_PHYS, - .end = COLIBRI_ETH_PHYS + 3, + .start = COLIBRI_PXA270_ETH_PHYS, + .end = COLIBRI_PXA270_ETH_PHYS + 3, .flags = IORESOURCE_MEM, }, [1] = { - .start = COLIBRI_ETH_PHYS + 4, - .end = COLIBRI_ETH_PHYS + 4 + 500, + .start = COLIBRI_PXA270_ETH_PHYS + 4, + .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500, .flags = IORESOURCE_MEM, }, [2] = { - .start = COLIBRI_ETH_IRQ, - .end = COLIBRI_ETH_IRQ, + .start = COLIBRI_PXA270_ETH_IRQ, + .end = COLIBRI_PXA270_ETH_IRQ, .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; @@ -113,25 +118,28 @@ static struct platform_device dm9000_device = { .num_resources = ARRAY_SIZE(dm9000_resources), .resource = dm9000_resources, }; +#endif /* CONFIG_DM9000 */ -static struct platform_device *colibri_devices[] __initdata = { - &flash_device, +static struct platform_device *colibri_pxa270_devices[] __initdata = { + &colibri_pxa270_flash_device, +#if defined(CONFIG_DM9000) &dm9000_device, +#endif }; -static void __init colibri_init(void) +static void __init colibri_pxa270_init(void) { - pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config)); - - platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices)); + pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config)); + platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices)); } -MACHINE_START(COLIBRI, "Toradex Colibri PXA27x") +MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = COLIBRI_SDRAM_BASE + 0x100, - .init_machine = colibri_init, + .init_machine = colibri_pxa270_init, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, MACHINE_END + diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c new file mode 100644 index 00000000000..10c2eaf9323 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -0,0 +1,190 @@ +/* + * arch/arm/mach-pxa/colibri-pxa300.c + * + * Support for Toradex PXA300/310 based Colibri module + * + * Daniel Mack <daniel@caiaq.de> + * Matthias Meier <matthias.j.meier@gmx.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <net/ax88796.h> + +#include <asm/mach-types.h> +#include <asm/sizes.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> + +#include <mach/pxa300.h> +#include <mach/colibri.h> +#include <mach/ohci.h> +#include <mach/pxafb.h> + +#include "generic.h" +#include "devices.h" + +#if defined(CONFIG_AX88796) +#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO) +/* + * Asix AX88796 Ethernet + */ +static struct ax_plat_data colibri_asix_platdata = { + .flags = AXFLG_MAC_FROMDEV, + .wordlength = 2 +}; + +static struct resource colibri_asix_resource[] = { + [0] = { + .start = PXA3xx_CS2_PHYS, + .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device asix_device = { + .name = "ax88796", + .id = 0, + .num_resources = ARRAY_SIZE(colibri_asix_resource), + .resource = colibri_asix_resource, + .dev = { + .platform_data = &colibri_asix_platdata + } +}; + +static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = { + GPIO1_nCS2, /* AX88796 chip select */ + GPIO26_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */ +}; + +static void __init colibri_pxa300_init_eth(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config)); + set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); + platform_device_register(&asix_device); +} +#else +static inline void __init colibri_pxa300_init_eth(void) {} +#endif /* CONFIG_AX88796 */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = { + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, +}; + +static struct pxaohci_platform_data colibri_pxa300_ohci_info = { + .port_mode = PMM_GLOBAL_MODE, + .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +void __init colibri_pxa300_init_ohci(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config)); + pxa_set_ohci_info(&colibri_pxa300_ohci_info); +} +#else +static inline void colibri_pxa300_init_ohci(void) {} +#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ + +static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = { + GPIO7_MMC1_CLK, + GPIO14_MMC1_CMD, + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, +}; + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = { + GPIO54_LCD_LDD_0, + GPIO55_LCD_LDD_1, + GPIO56_LCD_LDD_2, + GPIO57_LCD_LDD_3, + GPIO58_LCD_LDD_4, + GPIO59_LCD_LDD_5, + GPIO60_LCD_LDD_6, + GPIO61_LCD_LDD_7, + GPIO62_LCD_LDD_8, + GPIO63_LCD_LDD_9, + GPIO64_LCD_LDD_10, + GPIO65_LCD_LDD_11, + GPIO66_LCD_LDD_12, + GPIO67_LCD_LDD_13, + GPIO68_LCD_LDD_14, + GPIO69_LCD_LDD_15, + GPIO70_LCD_LDD_16, + GPIO71_LCD_LDD_17, + GPIO62_LCD_CS_N, + GPIO72_LCD_FCLK, + GPIO73_LCD_LCLK, + GPIO74_LCD_PCLK, + GPIO75_LCD_BIAS, + GPIO76_LCD_VSYNC, +}; + +static void __init colibri_pxa300_init_lcd(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config)); +} + +#else +static inline void colibri_pxa300_init_lcd(void) {} +#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */ + +#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE) +static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = { + GPIO24_AC97_SYSCLK, + GPIO23_AC97_nACRESET, + GPIO25_AC97_SDATA_IN_0, + GPIO27_AC97_SDATA_OUT, + GPIO28_AC97_SYNC, + GPIO29_AC97_BITCLK +}; + +static inline void __init colibri_pxa310_init_ac97(void) +{ + /* no AC97 codec on Colibri PXA300 */ + if (!cpu_is_pxa310()) + return; + + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config)); + pxa_set_ac97_info(NULL); +} +#else +static inline void colibri_pxa310_init_ac97(void) {} +#endif + +void __init colibri_pxa300_init(void) +{ + colibri_pxa300_init_eth(); + colibri_pxa300_init_ohci(); + colibri_pxa300_init_lcd(); + colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO)); + colibri_pxa310_init_ac97(); + colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config), + mfp_to_gpio(MFP_PIN_GPIO13)); +} + +MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .init_machine = colibri_pxa300_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c new file mode 100644 index 00000000000..55b74a7a615 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -0,0 +1,187 @@ +/* + * arch/arm/mach-pxa/colibri-pxa320.c + * + * Support for Toradex PXA320/310 based Colibri module + * + * Daniel Mack <daniel@caiaq.de> + * Matthias Meier <matthias.j.meier@gmx.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <net/ax88796.h> + +#include <asm/mach-types.h> +#include <asm/sizes.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> + +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa320.h> +#include <mach/colibri.h> +#include <mach/pxafb.h> +#include <mach/ohci.h> + +#include "generic.h" +#include "devices.h" + +#if defined(CONFIG_AX88796) +#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO) + +/* + * Asix AX88796 Ethernet + */ +static struct ax_plat_data colibri_asix_platdata = { + .flags = AXFLG_MAC_FROMDEV, + .wordlength = 2 +}; + +static struct resource colibri_asix_resource[] = { + [0] = { + .start = PXA3xx_CS2_PHYS, + .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device asix_device = { + .name = "ax88796", + .id = 0, + .num_resources = ARRAY_SIZE(colibri_asix_resource), + .resource = colibri_asix_resource, + .dev = { + .platform_data = &colibri_asix_platdata + } +}; + +static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = { + GPIO3_nCS2, /* AX88796 chip select */ + GPIO36_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */ +}; + +static void __init colibri_pxa320_init_eth(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); + set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); + platform_device_register(&asix_device); +} +#else +static inline void __init colibri_pxa320_init_eth(void) {} +#endif /* CONFIG_AX88796 */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = { + GPIO2_2_USBH_PEN, + GPIO3_2_USBH_PWR, +}; + +static struct pxaohci_platform_data colibri_pxa320_ohci_info = { + .port_mode = PMM_GLOBAL_MODE, + .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +void __init colibri_pxa320_init_ohci(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config)); + pxa_set_ohci_info(&colibri_pxa320_ohci_info); +} +#else +static inline void colibri_pxa320_init_ohci(void) {} +#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ + +static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = { + GPIO22_MMC1_CLK, + GPIO23_MMC1_CMD, + GPIO18_MMC1_DAT0, + GPIO19_MMC1_DAT1, + GPIO20_MMC1_DAT2, + GPIO21_MMC1_DAT3 +}; + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = { + GPIO6_2_LCD_LDD_0, + GPIO7_2_LCD_LDD_1, + GPIO8_2_LCD_LDD_2, + GPIO9_2_LCD_LDD_3, + GPIO10_2_LCD_LDD_4, + GPIO11_2_LCD_LDD_5, + GPIO12_2_LCD_LDD_6, + GPIO13_2_LCD_LDD_7, + GPIO63_LCD_LDD_8, + GPIO64_LCD_LDD_9, + GPIO65_LCD_LDD_10, + GPIO66_LCD_LDD_11, + GPIO67_LCD_LDD_12, + GPIO68_LCD_LDD_13, + GPIO69_LCD_LDD_14, + GPIO70_LCD_LDD_15, + GPIO71_LCD_LDD_16, + GPIO72_LCD_LDD_17, + GPIO73_LCD_CS_N, + GPIO74_LCD_VSYNC, + GPIO14_2_LCD_FCLK, + GPIO15_2_LCD_LCLK, + GPIO16_2_LCD_PCLK, + GPIO17_2_LCD_BIAS, +}; + +static void __init colibri_pxa320_init_lcd(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config)); +} +#else +static inline void colibri_pxa320_init_lcd(void) {} +#endif + +#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE) +static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = { + GPIO34_AC97_SYSCLK, + GPIO35_AC97_SDATA_IN_0, + GPIO37_AC97_SDATA_OUT, + GPIO38_AC97_SYNC, + GPIO39_AC97_BITCLK, + GPIO40_AC97_nACRESET +}; + +static inline void __init colibri_pxa320_init_ac97(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config)); + pxa_set_ac97_info(NULL); +} +#else +static inline void colibri_pxa320_init_ac97(void) {} +#endif + +void __init colibri_pxa320_init(void) +{ + colibri_pxa320_init_eth(); + colibri_pxa320_init_ohci(); + colibri_pxa320_init_lcd(); + colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO)); + colibri_pxa320_init_ac97(); + colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config), + mfp_to_gpio(MFP_PIN_GPIO28)); +} + +MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .init_machine = colibri_pxa320_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c new file mode 100644 index 00000000000..12d0afc54aa --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -0,0 +1,121 @@ +/* + * arch/arm/mach-pxa/colibri-pxa3xx.c + * + * Common functions for all Toradex PXA3xx modules + * + * Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <asm/sizes.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa300.h> +#include <mach/colibri.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> + +#include "generic.h" +#include "devices.h" + +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static int mmc_detect_pin; + +static int colibri_pxa3xx_mci_init(struct device *dev, + irq_handler_t colibri_mmc_detect_int, + void *data) +{ + int ret; + + ret = gpio_request(mmc_detect_pin, "mmc card detect"); + if (ret) + return ret; + + gpio_direction_input(mmc_detect_pin); + ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (ret) { + gpio_free(mmc_detect_pin); + return ret; + } + + return 0; +} + +static void colibri_pxa3xx_mci_exit(struct device *dev, void *data) +{ + free_irq(mmc_detect_pin, data); + gpio_free(gpio_to_irq(mmc_detect_pin)); +} + +static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .init = colibri_pxa3xx_mci_init, + .exit = colibri_pxa3xx_mci_exit, +}; + +void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) +{ + pxa3xx_mfp_config(pins, len); + mmc_detect_pin = detect_pin; + pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data); +} +#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */ + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static int lcd_bl_pin; + +/* + * LCD panel (Sharp LQ043T3DX02) + */ +static void colibri_lcd_backlight(int on) +{ + gpio_set_value(lcd_bl_pin, !!on); +} + +static struct pxafb_mode_info sharp_lq43_mode = { + .pixclock = 101936, + .xres = 480, + .yres = 272, + .bpp = 32, + .depth = 18, + .hsync_len = 41, + .left_margin = 2, + .right_margin = 2, + .vsync_len = 10, + .upper_margin = 2, + .lower_margin = 2, + .sync = 0, + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info sharp_lq43_info = { + .modes = &sharp_lq43_mode, + .num_modes = 1, + .cmap_inverse = 0, + .cmap_static = 0, + .lcd_conn = LCD_COLOR_TFT_18BPP, + .pxafb_backlight_power = colibri_lcd_backlight, +}; + +void __init colibri_pxa3xx_init_lcd(int bl_pin) +{ + lcd_bl_pin = bl_pin; + gpio_request(bl_pin, "lcd backlight"); + gpio_direction_output(bl_pin, 0); + set_pxa_fb_info(&sharp_lq43_info); +} +#endif + diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index a8d91b6c136..cdf21dd135b 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -41,9 +41,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> @@ -637,16 +635,16 @@ static void corgi_poweroff(void) /* Green LED off tells the bootloader to halt */ gpio_set_value(CORGI_GPIO_LED_GREEN, 0); - arm_machine_restart('h'); + arm_machine_restart('h', NULL); } -static void corgi_restart(char mode) +static void corgi_restart(char mode, const char *cmd) { if (!machine_is_corgi()) /* Green LED on tells the bootloader to reboot */ gpio_set_value(CORGI_GPIO_LED_GREEN, 1); - arm_machine_restart('h'); + arm_machine_restart('h', cmd); } static void __init corgi_init(void) diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 411607bc1fc..d9b96319d49 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -22,7 +22,6 @@ #include <linux/string.h> #include <mach/corgi.h> #include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/sharpsl.h> #include <mach/spitz.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index e3525903281..7f04b3a761d 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -24,7 +24,6 @@ #include <mach/sharpsl.h> #include <mach/corgi.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #include <mach/pxa2xx-gpio.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 8e2f2215c4b..a5ee70735e0 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -20,7 +20,6 @@ #include <asm/mach-types.h> #include <mach/ssp.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-gpio.h> #include <mach/regs-ssp.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 771dd4eac93..083a1d851d4 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -37,8 +37,6 @@ #include <linux/init.h> #include <linux/cpufreq.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #ifdef DEBUG diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 968c8309ec3..67f34a8d8e6 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -15,8 +15,6 @@ #include <linux/init.h> #include <linux/cpufreq.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa3xx-regs.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c new file mode 100644 index 00000000000..4a2a2952c37 --- /dev/null +++ b/arch/arm/mach-pxa/csb701.c @@ -0,0 +1,61 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/leds.h> + +static struct gpio_keys_button csb701_buttons[] = { + { + .code = 0x7, + .gpio = 1, + .active_low = 1, + .desc = "SW2", + .type = EV_SW, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data csb701_gpio_keys_data = { + .buttons = csb701_buttons, + .nbuttons = ARRAY_SIZE(csb701_buttons), +}; + +static struct gpio_led csb701_leds[] = { + { + .name = "csb701:yellow:heartbeat", + .default_trigger = "heartbeat", + .gpio = 11, + .active_low = 1, + }, +}; + +static struct platform_device csb701_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev.platform_data = &csb701_gpio_keys_data, +}; + +static struct gpio_led_platform_data csb701_leds_gpio_data = { + .leds = csb701_leds, + .num_leds = ARRAY_SIZE(csb701_leds), +}; + +static struct platform_device csb701_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &csb701_leds_gpio_data, +}; + +static struct platform_device *devices[] __initdata = { + &csb701_gpio_keys, + &csb701_leds_gpio, +}; + +static int __init csb701_init(void) +{ + return platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +module_init(csb701_init); + diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c new file mode 100644 index 00000000000..2b289f83a61 --- /dev/null +++ b/arch/arm/mach-pxa/csb726.c @@ -0,0 +1,318 @@ +/* + * Support for Cogent CSB726 + * + * Copyright (c) 2008 Dmitry Eremin-Solenikov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> +#include <linux/sm501.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/csb726.h> +#include <mach/mfp-pxa27x.h> +#include <mach/i2c.h> +#include <mach/mmc.h> +#include <mach/ohci.h> +#include <mach/pxa2xx-regs.h> + +#include "generic.h" +#include "devices.h" + +/* + * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89, + * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116, + * XXX: 21, + * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3 + * XXX: 33 CS_5 for LAN9215 on R1 + */ + +static unsigned long csb726_pin_config[] = { + GPIO78_nCS_2, /* EXP_CS */ + GPIO79_nCS_3, /* SMSC9215 */ + GPIO80_nCS_4, /* SM501 */ + + GPIO52_GPIO, /* #SMSC9251 int */ + GPIO53_GPIO, /* SM501 int */ + + GPIO1_GPIO, /* GPIO0 */ + GPIO11_GPIO, /* GPIO1 */ + GPIO9_GPIO, /* GPIO2 */ + GPIO10_GPIO, /* GPIO3 */ + GPIO16_PWM0_OUT, /* or GPIO4 */ + GPIO17_PWM1_OUT, /* or GPIO5 */ + GPIO94_GPIO, /* GPIO6 */ + GPIO95_GPIO, /* GPIO7 */ + GPIO96_GPIO, /* GPIO8 */ + GPIO97_GPIO, /* GPIO9 */ + GPIO15_GPIO, /* EXP_IRQ */ + GPIO18_RDY, /* EXP_WAIT */ + + GPIO0_GPIO, /* PWR_INT */ + GPIO104_GPIO, /* PWR_OFF */ + + GPIO12_GPIO, /* touch irq */ + + GPIO13_SSP2_TXD, + GPIO14_SSP2_SFRM, + MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */ + GPIO22_SSP2_SCLK, + + GPIO81_SSP3_TXD, + GPIO82_SSP3_RXD, + GPIO83_SSP3_SFRM, + GPIO84_SSP3_SCLK, + + GPIO20_GPIO, /* SDIO int */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO100_GPIO, /* SD CD */ + GPIO101_GPIO, /* SD WP */ + + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO113_AC97_nRESET, + + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + GPIO36_FFUART_DCD, + GPIO37_FFUART_DSR, + GPIO38_FFUART_RI, + GPIO39_FFUART_TXD, + GPIO40_FFUART_DTR, + GPIO41_FFUART_RTS, + + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, /* maybe unused */ + GPIO85_nPCE_1, + GPIO98_GPIO, /* CF IRQ */ + GPIO99_GPIO, /* CF CD */ + GPIO103_GPIO, /* Reset */ + + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, +}; + +static struct pxamci_platform_data csb726_mci_data; + +static int csb726_mci_init(struct device *dev, + irq_handler_t detect, void *data) +{ + int err; + + csb726_mci_data.detect_delay = msecs_to_jiffies(500); + + err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect"); + if (err) + goto err_det_req; + + err = gpio_direction_input(CSB726_GPIO_MMC_DETECT); + if (err) + goto err_det_dir; + + err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro"); + if (err) + goto err_ro_req; + + err = gpio_direction_input(CSB726_GPIO_MMC_RO); + if (err) + goto err_ro_dir; + + err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect, + IRQF_DISABLED, "MMC card detect", data); + if (err) + goto err_irq; + + return 0; + +err_irq: +err_ro_dir: + gpio_free(CSB726_GPIO_MMC_RO); +err_ro_req: +err_det_dir: + gpio_free(CSB726_GPIO_MMC_DETECT); +err_det_req: + return err; +} + +static int csb726_mci_get_ro(struct device *dev) +{ + return gpio_get_value(CSB726_GPIO_MMC_RO); +} + +static void csb726_mci_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data); + gpio_free(CSB726_GPIO_MMC_RO); + gpio_free(CSB726_GPIO_MMC_DETECT); +} + +static struct pxamci_platform_data csb726_mci = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = csb726_mci_init, + .get_ro = csb726_mci_get_ro, + /* FIXME setpower */ + .exit = csb726_mci_exit, +}; + +static struct pxaohci_platform_data csb726_ohci_platform_data = { + .port_mode = PMM_NPS_MODE, + .flags = ENABLE_PORT1 | NO_OC_PROTECTION, +}; + +static struct mtd_partition csb726_flash_partitions[] = { + { + .name = "Bootloader", + .offset = 0, + .size = CSB726_FLASH_uMON, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data csb726_flash_data = { + .width = 2, + .parts = csb726_flash_partitions, + .nr_parts = ARRAY_SIZE(csb726_flash_partitions), +}; + +static struct resource csb726_flash_resources[] = { + { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 , + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device csb726_flash = { + .name = "physmap-flash", + .dev = { + .platform_data = &csb726_flash_data, + }, + .resource = csb726_flash_resources, + .num_resources = ARRAY_SIZE(csb726_flash_resources), +}; + +static struct resource csb726_sm501_resources[] = { + { + .start = PXA_CS4_PHYS, + .end = PXA_CS4_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, + .name = "sm501-localmem", + }, + { + .start = PXA_CS4_PHYS + SZ_64M - SZ_2M, + .end = PXA_CS4_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + .name = "sm501-regs", + }, + { + .start = CSB726_IRQ_SM501, + .end = CSB726_IRQ_SM501, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sm501_initdata csb726_sm501_initdata = { +/* .devices = SM501_USE_USB_HOST, */ + .devices = SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1, +}; + +static struct sm501_platdata csb726_sm501_platdata = { + .init = &csb726_sm501_initdata, +}; + +static struct platform_device csb726_sm501 = { + .name = "sm501", + .id = 0, + .num_resources = ARRAY_SIZE(csb726_sm501_resources), + .resource = csb726_sm501_resources, + .dev = { + .platform_data = &csb726_sm501_platdata, + }, +}; + +static struct resource csb726_lan_resources[] = { + { + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = CSB726_IRQ_LAN, + .end = CSB726_IRQ_LAN, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device csb726_lan = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(csb726_lan_resources), + .resource = csb726_lan_resources, +}; + +static struct platform_device *devices[] __initdata = { + &csb726_flash, + &csb726_sm501, + &csb726_lan, +}; + +static void __init csb726_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config)); +/* MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */ +/* MSC2 = 0x06697ff4; *//* none/SM501 */ + MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */ + + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + pxa_set_mci_info(&csb726_mci); + pxa_set_ohci_info(&csb726_ohci_platform_data); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(CSB726, "Cogent CSB726") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .init_machine = csb726_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index e16f8e3d58d..d245e59c51b 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,7 +4,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/pxa-regs.h> #include <mach/udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c index 1bd7f740427..74d3f8987c5 100644 --- a/arch/arm/mach-pxa/e330.c +++ b/arch/arm/mach-pxa/e330.c @@ -20,9 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c index edcd9d5ce54..08003627213 100644 --- a/arch/arm/mach-pxa/e350.c +++ b/arch/arm/mach-pxa/e350.c @@ -21,9 +21,7 @@ #include <asm/mach-types.h> #include <mach/irqs.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c index 77bb8e2c48c..ed9c0c3f64a 100644 --- a/arch/arm/mach-pxa/e400.c +++ b/arch/arm/mach-pxa/e400.c @@ -22,9 +22,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/pxafb.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 6d48e00f4f0..07500a04fd8 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -24,9 +24,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irda.h> @@ -135,6 +133,11 @@ static unsigned long e740_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ + GPIO40_GPIO, /* Mic amp power */ + GPIO41_GPIO, /* Headphone amp power */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ @@ -189,7 +192,7 @@ static void __init e740_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); eseries_register_clks(); - clk_add_alias("CLK_CK48M", &e740_t7l66xb_device.dev, + clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name, "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index be1ab8edb97..6126c04e02b 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -23,9 +23,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irda.h> @@ -133,6 +131,11 @@ static unsigned long e750_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO4_GPIO, /* Headphone amp power */ + GPIO7_GPIO, /* Speaker amp power */ + GPIO37_GPIO, /* Headphone detect */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ @@ -190,7 +193,7 @@ static struct platform_device *devices[] __initdata = { static void __init e750_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); - clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev, + clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index cc9b1293e86..74ab09812a7 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -23,9 +23,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irqs.h> @@ -196,7 +194,7 @@ static struct platform_device *devices[] __initdata = { static void __init e800_init(void) { - clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev, + clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f5ed8038ede..920dfb8d36d 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -11,40 +11,63 @@ #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <linux/dm9000.h> #include <linux/rtc-v3020.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/mfd/da903x.h> +#include <linux/regulator/machine.h> +#include <linux/spi/spi.h> +#include <linux/spi/tdo24m.h> +#include <linux/power_supply.h> +#include <linux/apm-emulation.h> + +#include <media/soc_camera.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> +#include <mach/pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/mmc.h> #include <mach/pxa27x_keypad.h> +#include <mach/i2c.h> +#include <mach/camera.h> +#include <mach/pxa2xx_spi.h> #include "generic.h" +#include "devices.h" -/* GPIO IRQ usage */ -#define GPIO41_ETHIRQ (41) +/* EM-X270 specific GPIOs */ #define GPIO13_MMC_CD (13) +#define GPIO95_MMC_WP (95) +#define GPIO56_NAND_RB (56) + +/* eXeda specific GPIOs */ +#define GPIO114_MMC_CD (114) +#define GPIO20_NAND_RB (20) +#define GPIO38_SD_PWEN (38) + +/* common GPIOs */ +#define GPIO11_NAND_CS (11) +#define GPIO93_CAM_RESET (93) +#define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) -#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD) -/* NAND control GPIOs */ -#define GPIO11_NAND_CS (11) -#define GPIO56_NAND_RB (56) +static int mmc_cd; +static int nand_rb; +static int dm9000_flags; -static unsigned long em_x270_pin_config[] = { +static unsigned long common_pin_config[] = { /* AC'97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, @@ -150,21 +173,32 @@ static unsigned long em_x270_pin_config[] = { GPIO18_RDY, /* GPIO */ - GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */ /* power controls */ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ + GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ /* NAND controls */ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO56_GPIO, /* NAND Ready/Busy */ /* interrupts */ - GPIO13_GPIO, /* MMC card detect */ GPIO41_GPIO, /* DM9000 interrupt */ }; +static unsigned long em_x270_pin_config[] = { + GPIO13_GPIO, /* MMC card detect */ + GPIO56_GPIO, /* NAND Ready/Busy */ + GPIO95_GPIO, /* MMC Write protect */ +}; + +static unsigned long exeda_pin_config[] = { + GPIO20_GPIO, /* NAND Ready/Busy */ + GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */ + GPIO114_GPIO, /* MMC card detect */ +}; + #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource em_x270_dm9000_resource[] = { [0] = { @@ -185,7 +219,7 @@ static struct resource em_x270_dm9000_resource[] = { }; static struct dm9000_plat_data em_x270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY, + .flags = DM9000_PLATF_NO_EEPROM, }; static struct platform_device em_x270_dm9000 = { @@ -200,6 +234,7 @@ static struct platform_device em_x270_dm9000 = { static void __init em_x270_init_dm9000(void) { + em_x270_dm9000_platdata.flags |= dm9000_flags; platform_device_register(&em_x270_dm9000); } #else @@ -289,7 +324,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd) { dsb(); - return gpio_get_value(GPIO56_NAND_RB); + return gpio_get_value(nand_rb); } static struct mtd_partition em_x270_partition_info[] = { @@ -354,14 +389,14 @@ static void __init em_x270_init_nand(void) gpio_direction_output(GPIO11_NAND_CS, 1); - err = gpio_request(GPIO56_NAND_RB, "NAND R/B"); + err = gpio_request(nand_rb, "NAND R/B"); if (err) { pr_warning("EM-X270: failed to request NAND R/B gpio\n"); gpio_free(GPIO11_NAND_CS); return; } - gpio_direction_input(GPIO56_NAND_RB); + gpio_direction_input(nand_rb); platform_device_register(&em_x270_nand); } @@ -369,6 +404,61 @@ static void __init em_x270_init_nand(void) static inline void em_x270_init_nand(void) {} #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition em_x270_nor_parts[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00050000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Environment", + .offset = 0x00050000, + .size = 0x00010000, + }, { + .name = "Reserved", + .offset = 0x00060000, + .size = 0x00050000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Splashscreen", + .offset = 0x000b0000, + .size = 0x00050000, + } +}; + +static struct physmap_flash_data em_x270_nor_data[] = { + [0] = { + .width = 2, + .parts = em_x270_nor_parts, + .nr_parts = ARRAY_SIZE(em_x270_nor_parts), + }, +}; + +static struct resource em_x270_nor_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_1M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device em_x270_physmap_flash = { + .name = "physmap-flash", + .id = 0, + .num_resources = 1, + .resource = &em_x270_nor_flash_resource, + .dev = { + .platform_data = &em_x270_nor_data, + }, +}; + +static void __init em_x270_init_nor(void) +{ + platform_device_register(&em_x270_physmap_flash); +} +#else +static inline void em_x270_init_nor(void) {} +#endif + /* PXA27x OHCI controller setup */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int em_x270_ohci_init(struct device *dev) @@ -395,40 +485,93 @@ static inline void em_x270_init_ohci(void) {} /* MCI controller setup */ #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) +static struct regulator *em_x270_sdio_ldo; + static int em_x270_mci_init(struct device *dev, irq_handler_t em_x270_detect_int, void *data) { - int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + int err; + + em_x270_sdio_ldo = regulator_get(dev, "vcc sdio"); + if (IS_ERR(em_x270_sdio_ldo)) { + dev_err(dev, "can't request SDIO power supply: %ld\n", + PTR_ERR(em_x270_sdio_ldo)); + return PTR_ERR(em_x270_sdio_ldo); + } + + err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "MMC card detect", data); if (err) { - printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", - __func__, err); - return err; + dev_err(dev, "can't request MMC card detect IRQ: %d\n", err); + goto err_irq; + } + + if (machine_is_em_x270()) { + err = gpio_request(GPIO95_MMC_WP, "MMC WP"); + if (err) { + dev_err(dev, "can't request MMC write protect: %d\n", + err); + goto err_gpio_wp; + } + gpio_direction_input(GPIO95_MMC_WP); + } else { + err = gpio_request(GPIO38_SD_PWEN, "sdio power"); + if (err) { + dev_err(dev, "can't request MMC power control : %d\n", + err); + goto err_gpio_wp; + } + gpio_direction_output(GPIO38_SD_PWEN, 1); } return 0; + +err_gpio_wp: + free_irq(gpio_to_irq(mmc_cd), data); +err_irq: + regulator_put(em_x270_sdio_ldo); + + return err; } static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) { - /* - FIXME: current hardware implementation does not allow to - enable/disable MMC power. This will be fixed in next HW releases, - and we'll need to add implmentation here. - */ - return; + struct pxamci_platform_data* p_d = dev->platform_data; + + if ((1 << vdd) & p_d->ocr_mask) { + int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; + + regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); + regulator_enable(em_x270_sdio_ldo); + } else { + regulator_disable(em_x270_sdio_ldo); + } } static void em_x270_mci_exit(struct device *dev, void *data) { - int irq = gpio_to_irq(GPIO13_MMC_CD); - free_irq(irq, data); + free_irq(gpio_to_irq(mmc_cd), data); + regulator_put(em_x270_sdio_ldo); + + if (machine_is_em_x270()) + gpio_free(GPIO95_MMC_WP); + else + gpio_free(GPIO38_SD_PWEN); +} + +static int em_x270_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO95_MMC_WP); } static struct pxamci_platform_data em_x270_mci_platform_data = { - .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31, + .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| + MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| + MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| + MMC_VDD_30_31|MMC_VDD_31_32, .init = em_x270_mci_init, .setpower = em_x270_mci_setpower, .exit = em_x270_mci_exit, @@ -436,33 +579,53 @@ static struct pxamci_platform_data em_x270_mci_platform_data = { static void __init em_x270_init_mmc(void) { + if (machine_is_em_x270()) + em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro; + + em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&em_x270_mci_platform_data); } #else static inline void em_x270_init_mmc(void) {} #endif -/* LCD 480x640 */ +/* LCD */ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -static struct pxafb_mode_info em_x270_lcd_mode = { - .pixclock = 50000, - .bpp = 16, - .xres = 480, - .yres = 640, - .hsync_len = 8, - .vsync_len = 2, - .left_margin = 8, - .upper_margin = 0, - .right_margin = 24, - .lower_margin = 4, - .cmap_greyscale = 0, +static struct pxafb_mode_info em_x270_lcd_modes[] = { + [0] = { + .pixclock = 38250, + .bpp = 16, + .xres = 480, + .yres = 640, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 2, + .right_margin = 24, + .lower_margin = 4, + .sync = 0, + }, + [1] = { + .pixclock = 153800, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 2, + .right_margin = 88, + .lower_margin = 2, + .sync = 0, + }, }; static struct pxafb_mach_info em_x270_lcd = { - .modes = &em_x270_lcd_mode, - .num_modes = 1, + .modes = em_x270_lcd_modes, + .num_modes = 2, .lcd_conn = LCD_COLOR_TFT_16BPP, }; + static void __init em_x270_init_lcd(void) { set_pxa_fb_info(&em_x270_lcd); @@ -471,6 +634,40 @@ static void __init em_x270_init_lcd(void) static inline void em_x270_init_lcd(void) {} #endif +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +static struct pxa2xx_spi_master em_x270_spi_info = { + .num_chipselect = 1, +}; + +static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { + .rx_threshold = 1, + .tx_threshold = 1, +}; + +static struct tdo24m_platform_data em_x270_tdo24m_pdata = { + .model = TDO35S, +}; + +static struct spi_board_info em_x270_spi_devices[] __initdata = { + { + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .controller_data = &em_x270_tdo24m_chip, + .platform_data = &em_x270_tdo24m_pdata, + }, +}; + +static void __init em_x270_init_spi(void) +{ + pxa2xx_set_spi_info(1, &em_x270_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); +} +#else +static inline void em_x270_init_spi(void) {} +#endif + #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) static void __init em_x270_init_ac97(void) { @@ -481,23 +678,76 @@ static inline void em_x270_init_ac97(void) {} #endif #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) -static unsigned int em_x270_matrix_keys[] = { +static unsigned int em_x270_module_matrix_keys[] = { KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), }; -struct pxa27x_keypad_platform_data em_x270_keypad_info = { +struct pxa27x_keypad_platform_data em_x270_module_keypad_info = { /* code map for the matrix keys */ .matrix_key_rows = 3, .matrix_key_cols = 3, - .matrix_key_map = em_x270_matrix_keys, - .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys), + .matrix_key_map = em_x270_module_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys), +}; + +static unsigned int em_x270_exeda_matrix_keys[] = { + KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL), + KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE), + KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL), + KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH), + + KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M), + KEY(1, 2, KEY_N), KEY(1, 3, KEY_B), + KEY(1, 4, KEY_V), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z), + + KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON), + KEY(2, 2, KEY_L), KEY(2, 3, KEY_K), + KEY(2, 4, KEY_J), KEY(2, 5, KEY_H), + KEY(2, 6, KEY_G), KEY(2, 7, KEY_F), + + KEY(3, 0, KEY_D), KEY(3, 1, KEY_S), + KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB), + KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P), + KEY(3, 6, KEY_O), KEY(3, 7, KEY_I), + + KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_T), KEY(4, 3, KEY_R), + KEY(4, 4, KEY_E), KEY(4, 5, KEY_W), + KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS), + + KEY(5, 0, KEY_0), KEY(5, 1, KEY_9), + KEY(5, 2, KEY_8), KEY(5, 3, KEY_7), + KEY(5, 4, KEY_6), KEY(5, 5, KEY_5), + KEY(5, 6, KEY_4), KEY(5, 7, KEY_3), + + KEY(6, 0, KEY_2), KEY(6, 1, KEY_1), + KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END), + KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP), + KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1), + + KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT), + KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME), + KEY(7, 4, 0), KEY(7, 5, 0), + KEY(7, 6, 0), KEY(7, 7, 0), +}; + +struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = { + /* code map for the matrix keys */ + .matrix_key_rows = 8, + .matrix_key_cols = 8, + .matrix_key_map = em_x270_exeda_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys), }; static void __init em_x270_init_keypad(void) { - pxa_set_keypad_info(&em_x270_keypad_info); + if (machine_is_em_x270()) + pxa_set_keypad_info(&em_x270_module_keypad_info); + else + pxa_set_keypad_info(&em_x270_exeda_keypad_info); } #else static inline void em_x270_init_keypad(void) {} @@ -535,19 +785,264 @@ static void __init em_x270_init_gpio_keys(void) static inline void em_x270_init_gpio_keys(void) {} #endif -static void __init em_x270_init(void) +/* Quick Capture Interface and sensor setup */ +#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) +static struct regulator *em_x270_camera_ldo; + +static int em_x270_sensor_init(struct device *dev) { + int ret; + + ret = gpio_request(GPIO93_CAM_RESET, "camera reset"); + if (ret) + return ret; + + gpio_direction_output(GPIO93_CAM_RESET, 0); + + em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); + if (em_x270_camera_ldo == NULL) { + gpio_free(GPIO93_CAM_RESET); + return -ENODEV; + } + + ret = regulator_enable(em_x270_camera_ldo); + if (ret) { + regulator_put(em_x270_camera_ldo); + gpio_free(GPIO93_CAM_RESET); + return ret; + } + + gpio_set_value(GPIO93_CAM_RESET, 1); + + return 0; +} + +struct pxacamera_platform_data em_x270_camera_platform_data = { + .init = em_x270_sensor_init, + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, +}; + +static int em_x270_sensor_power(struct device *dev, int on) +{ + int ret; + int is_on = regulator_is_enabled(em_x270_camera_ldo); + + if (on == is_on) + return 0; + + gpio_set_value(GPIO93_CAM_RESET, !on); + + if (on) + ret = regulator_enable(em_x270_camera_ldo); + else + ret = regulator_disable(em_x270_camera_ldo); + + if (ret) + return ret; + + gpio_set_value(GPIO93_CAM_RESET, on); + + return 0; +} + +static struct soc_camera_link iclink = { + .bus_id = 0, + .power = em_x270_sensor_power, +}; + +static struct i2c_board_info em_x270_i2c_cam_info[] = { + { + I2C_BOARD_INFO("mt9m111", 0x48), + .platform_data = &iclink, + }, +}; + +static struct i2c_pxa_platform_data em_x270_i2c_info = { + .fast_mode = 1, +}; + +static void __init em_x270_init_camera(void) +{ + pxa_set_i2c_info(&em_x270_i2c_info); + i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info)); + pxa_set_camera_info(&em_x270_camera_platform_data); +} +#else +static inline void em_x270_init_camera(void) {} +#endif + +/* DA9030 related initializations */ +#define REGULATOR_CONSUMER(_name, _dev, _supply) \ + static struct regulator_consumer_supply _name##_consumers[] = { \ + { \ + .dev = _dev, \ + .supply = _supply, \ + }, \ + } + +REGULATOR_CONSUMER(ldo3, NULL, "vcc gps"); +REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); +REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); +REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); +REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs"); + +#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ + static struct regulator_init_data _ldo##_data = { \ + .constraints = { \ + .min_uV = _min_uV, \ + .max_uV = _max_uV, \ + .state_mem = { \ + .enabled = 0, \ + }, \ + .valid_ops_mask = _ops_mask, \ + }, \ + .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \ + .consumer_supplies = _ldo##_consumers, \ + }; + +REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo10, 2000000, 3200000, + REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); +REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); + +struct led_info em_x270_led_info = { + .name = "em-x270:orange", + .default_trigger = "battery-charging-or-full", +}; + +struct power_supply_info em_x270_psy_info = { + .name = "LP555597P6H-FPS", + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + .voltage_max_design = 4200000, + .voltage_min_design = 3000000, + .use_for_apm = 1, +}; + +static void em_x270_battery_low(void) +{ + apm_queue_event(APM_LOW_BATTERY); +} + +static void em_x270_battery_critical(void) +{ + apm_queue_event(APM_CRITICAL_SUSPEND); +} + +struct da9030_battery_info em_x270_batterty_info = { + .battery_info = &em_x270_psy_info, + + .charge_milliamp = 1000, + .charge_millivolt = 4200, + + .vbat_low = 3600, + .vbat_crit = 3400, + .vbat_charge_start = 4100, + .vbat_charge_stop = 4200, + .vbat_charge_restart = 4000, + + .vcharge_min = 3200, + .vcharge_max = 5500, + + .tbat_low = 197, + .tbat_high = 78, + .tbat_restart = 100, + + .batmon_interval = 0, + + .battery_low = em_x270_battery_low, + .battery_critical = em_x270_battery_critical, +}; + +#define DA9030_SUBDEV(_name, _id, _pdata) \ + { \ + .name = "da903x-" #_name, \ + .id = DA9030_ID_##_id, \ + .platform_data = _pdata, \ + } + +#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data) + +struct da903x_subdev_info em_x270_da9030_subdevs[] = { + DA9030_LDO(3), + DA9030_LDO(5), + DA9030_LDO(10), + DA9030_LDO(12), + DA9030_LDO(19), + + DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), + DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), + DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), +}; + +static struct da903x_platform_data em_x270_da9030_info = { + .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs), + .subdevs = em_x270_da9030_subdevs, +}; + +static struct i2c_board_info em_x270_i2c_pmic_info = { + I2C_BOARD_INFO("da9030", 0x49), + .irq = IRQ_GPIO(0), + .platform_data = &em_x270_da9030_info, +}; + +static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = { + .use_pio = 1, +}; + +static void __init em_x270_init_da9030(void) +{ + pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info); + i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); +} + +static void __init em_x270_module_init(void) +{ + pr_info("%s\n", __func__); pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); + mmc_cd = GPIO13_MMC_CD; + nand_rb = GPIO56_NAND_RB; + dm9000_flags = DM9000_PLATF_32BITONLY; +} + +static void __init em_x270_exeda_init(void) +{ + pr_info("%s\n", __func__); + pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config)); + + mmc_cd = GPIO114_MMC_CD; + nand_rb = GPIO20_NAND_RB; + dm9000_flags = DM9000_PLATF_16BITONLY; +} + +static void __init em_x270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); + + if (machine_is_em_x270()) + em_x270_module_init(); + else if (machine_is_exeda()) + em_x270_exeda_init(); + else + panic("Unsupported machine: %d\n", machine_arch_type); + + em_x270_init_da9030(); em_x270_init_dm9000(); em_x270_init_rtc(); em_x270_init_nand(); + em_x270_init_nor(); em_x270_init_lcd(); em_x270_init_mmc(); em_x270_init_ohci(); em_x270_init_keypad(); em_x270_init_gpio_keys(); em_x270_init_ac97(); + em_x270_init_camera(); + em_x270_init_spi(); } MACHINE_START(EM_X270, "Compulab EM-X270") @@ -559,3 +1054,13 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END + +MACHINE_START(EXEDA, "Compulab eXeda") + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = em_x270_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index dfce7d5b659..c60dadf847a 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -20,8 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irda.h> diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index df5f822f3b6..92ba16e1b6f 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -19,18 +19,16 @@ #include <linux/input.h> #include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> #include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/i2c.h> #include <mach/hardware.h> #include <mach/pxa27x_keypad.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 0ccc91c92c4..3126a35aa00 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -26,8 +26,9 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> -#include <mach/pxa-regs.h> #include <mach/reset.h> +#include <mach/gpio.h> +#include <mach/pxa2xx-gpio.h> #include "generic.h" @@ -127,3 +128,33 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } + +/* + * Configure pins for GPIO or other functions + */ +int pxa_gpio_mode(int gpio_mode) +{ + unsigned long flags; + int gpio = gpio_mode & GPIO_MD_MASK_NR; + int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; + int gafr; + + if (gpio > pxa_last_gpio) + return -EINVAL; + + local_irq_save(flags); + if (gpio_mode & GPIO_DFLT_LOW) + GPCR(gpio) = GPIO_bit(gpio); + else if (gpio_mode & GPIO_DFLT_HIGH) + GPSR(gpio) = GPIO_bit(gpio); + if (gpio_mode & GPIO_MD_MASK_DIR) + GPDR(gpio) |= GPIO_bit(gpio); + else + GPDR(gpio) &= ~GPIO_bit(gpio); + gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); + GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(pxa_gpio_mode); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index dc876a8e666..3465268ca71 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -9,20 +9,17 @@ * published by the Free Software Foundation. */ -typedef int (*set_wake_t)(unsigned int, unsigned int); - struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq(int irq_nr, set_wake_t fn); -extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn); +extern void __init pxa_init_irq(int irq_nr, + int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); extern unsigned int get_clk_frequency_khz(int info); -extern int pxa_last_gpio; #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c deleted file mode 100644 index 5fec1e479cb..00000000000 --- a/arch/arm/mach-pxa/gpio.c +++ /dev/null @@ -1,453 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/gpio.c - * - * Generic PXA GPIO handling - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/irq.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <asm/gpio.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> - -#include "generic.h" - -#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) -#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) -#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) -#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - -struct pxa_gpio_chip { - struct gpio_chip chip; - void __iomem *regbase; -}; - -int pxa_last_gpio; - -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static int __gpio_is_inverted(unsigned gpio) -{ - return cpu_is_pxa25x() && gpio > 85; -} -#else -#define __gpio_is_inverted(gpio) (0) -#endif - -/* - * Configure pins for GPIO or other functions - */ -int pxa_gpio_mode(int gpio_mode) -{ - unsigned long flags; - int gpio = gpio_mode & GPIO_MD_MASK_NR; - int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; - - if (gpio > pxa_last_gpio) - return -EINVAL; - - local_irq_save(flags); - if (gpio_mode & GPIO_DFLT_LOW) - GPCR(gpio) = GPIO_bit(gpio); - else if (gpio_mode & GPIO_DFLT_HIGH) - GPSR(gpio) = GPIO_bit(gpio); - if (gpio_mode & GPIO_MD_MASK_DIR) - GPDR(gpio) |= GPIO_bit(gpio); - else - GPDR(gpio) &= ~GPIO_bit(gpio); - gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); - GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); - local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(pxa_gpio_mode); - -static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - unsigned long flags; - u32 mask = 1 << offset; - u32 value; - struct pxa_gpio_chip *pxa; - void __iomem *gpdr; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - gpdr = pxa->regbase + GPDR_OFFSET; - local_irq_save(flags); - value = __raw_readl(gpdr); - if (__gpio_is_inverted(chip->base + offset)) - value |= mask; - else - value &= ~mask; - __raw_writel(value, gpdr); - local_irq_restore(flags); - - return 0; -} - -static int pxa_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - unsigned long flags; - u32 mask = 1 << offset; - u32 tmp; - struct pxa_gpio_chip *pxa; - void __iomem *gpdr; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - __raw_writel(mask, - pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET)); - gpdr = pxa->regbase + GPDR_OFFSET; - local_irq_save(flags); - tmp = __raw_readl(gpdr); - if (__gpio_is_inverted(chip->base + offset)) - tmp &= ~mask; - else - tmp |= mask; - __raw_writel(tmp, gpdr); - local_irq_restore(flags); - - return 0; -} - -/* - * Return GPIO level - */ -static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - u32 mask = 1 << offset; - struct pxa_gpio_chip *pxa; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask; -} - -/* - * Set output GPIO level - */ -static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - u32 mask = 1 << offset; - struct pxa_gpio_chip *pxa; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - - if (value) - __raw_writel(mask, pxa->regbase + GPSR_OFFSET); - else - __raw_writel(mask, pxa->regbase + GPCR_OFFSET); -} - -#define GPIO_CHIP(_n) \ - [_n] = { \ - .regbase = GPIO##_n##_BASE, \ - .chip = { \ - .label = "gpio-" #_n, \ - .direction_input = pxa_gpio_direction_input, \ - .direction_output = pxa_gpio_direction_output, \ - .get = pxa_gpio_get, \ - .set = pxa_gpio_set, \ - .base = (_n) * 32, \ - .ngpio = 32, \ - }, \ - } - -static struct pxa_gpio_chip pxa_gpio_chip[] = { - GPIO_CHIP(0), - GPIO_CHIP(1), - GPIO_CHIP(2), -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - GPIO_CHIP(3), -#endif -}; - -/* - * PXA GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ - -static unsigned long GPIO_IRQ_rising_edge[4]; -static unsigned long GPIO_IRQ_falling_edge[4]; -static unsigned long GPIO_IRQ_mask[4]; - -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } - - return 0; -} - -static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) -{ - int gpio, idx; - - gpio = IRQ_TO_GPIO(irq); - idx = gpio >> 5; - - if (type == IRQ_TYPE_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - * GPIOs set to alternate function or to output during probe - */ - if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) || - (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio))) - return 0; - - if (__gpio_is_occupied(gpio)) - return 0; - - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (__gpio_is_inverted(gpio)) - GPDR(gpio) |= GPIO_bit(gpio); - else - GPDR(gpio) &= ~GPIO_bit(gpio); - - if (type & IRQ_TYPE_EDGE_RISING) - __set_bit(gpio, GPIO_IRQ_rising_edge); - else - __clear_bit(gpio, GPIO_IRQ_rising_edge); - - if (type & IRQ_TYPE_EDGE_FALLING) - __set_bit(gpio, GPIO_IRQ_falling_edge); - else - __clear_bit(gpio, GPIO_IRQ_falling_edge); - - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; - - pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, - ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), - ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); - return 0; -} - -/* - * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1. - */ - -static void pxa_ack_low_gpio(unsigned int irq) -{ - GEDR0 = (1 << (irq - IRQ_GPIO0)); -} - -static void pxa_mask_low_gpio(unsigned int irq) -{ - ICMR &= ~(1 << (irq - PXA_IRQ(0))); -} - -static void pxa_unmask_low_gpio(unsigned int irq) -{ - ICMR |= 1 << (irq - PXA_IRQ(0)); -} - -static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .ack = pxa_ack_low_gpio, - .mask = pxa_mask_low_gpio, - .unmask = pxa_unmask_low_gpio, - .set_type = pxa_gpio_irq_type, -}; - -/* - * Demux handler for GPIO>=2 edge detect interrupts - */ - -#define GEDR_BITS (sizeof(gedr) * BITS_PER_BYTE) - -static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) -{ - int loop, bit, n; - unsigned long gedr[4]; - - do { - gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3; - gedr[1] = GEDR1 & GPIO_IRQ_mask[1]; - gedr[2] = GEDR2 & GPIO_IRQ_mask[2]; - gedr[3] = GEDR3 & GPIO_IRQ_mask[3]; - - GEDR0 = gedr[0]; GEDR1 = gedr[1]; - GEDR2 = gedr[2]; GEDR3 = gedr[3]; - - loop = 0; - bit = find_first_bit(gedr, GEDR_BITS); - while (bit < GEDR_BITS) { - loop = 1; - - n = PXA_GPIO_IRQ_BASE + bit; - generic_handle_irq(n); - - bit = find_next_bit(gedr, GEDR_BITS, bit + 1); - } - } while (loop); -} - -static void pxa_ack_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - GEDR(gpio) = GPIO_bit(gpio); -} - -static void pxa_mask_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - __clear_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) &= ~GPIO_bit(gpio); - GFER(gpio) &= ~GPIO_bit(gpio); -} - -static void pxa_unmask_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - int idx = gpio >> 5; - __set_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; -} - -static struct irq_chip pxa_muxed_gpio_chip = { - .name = "GPIO", - .ack = pxa_ack_muxed_gpio, - .mask = pxa_mask_muxed_gpio, - .unmask = pxa_unmask_muxed_gpio, - .set_type = pxa_gpio_irq_type, -}; - -void __init pxa_init_gpio(int gpio_nr, set_wake_t fn) -{ - int irq, i, gpio; - - pxa_last_gpio = gpio_nr - 1; - - /* clear all GPIO edge detects */ - for (i = 0; i < gpio_nr; i += 32) { - GFER(i) = 0; - GRER(i) = 0; - GEDR(i) = GEDR(i); - } - - /* GPIO 0 and 1 must have their mask bit always set */ - GPIO_IRQ_mask[0] = 3; - - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - set_irq_chip(irq, &pxa_low_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) { - set_irq_chip(irq, &pxa_muxed_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Install handler for GPIO>=2 edge detect interrupts */ - set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); - - pxa_low_gpio_chip.set_wake = fn; - pxa_muxed_gpio_chip.set_wake = fn; - - /* add a GPIO chip for each register bank. - * the last PXA25x register only contains 21 GPIOs - */ - for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) { - if (gpio + 32 > gpio_nr) - pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio; - gpiochip_add(&pxa_gpio_chip[i].chip); - } -} - -#ifdef CONFIG_PM - -static unsigned long saved_gplr[4]; -static unsigned long saved_gpdr[4]; -static unsigned long saved_grer[4]; -static unsigned long saved_gfer[4]; - -static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) -{ - int i, gpio; - - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { - saved_gplr[i] = GPLR(gpio); - saved_gpdr[i] = GPDR(gpio); - saved_grer[i] = GRER(gpio); - saved_gfer[i] = GFER(gpio); - - /* Clear GPIO transition detect bits */ - GEDR(gpio) = GEDR(gpio); - } - return 0; -} - -static int pxa_gpio_resume(struct sys_device *dev) -{ - int i, gpio; - - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { - /* restore level with set/clear */ - GPSR(gpio) = saved_gplr[i]; - GPCR(gpio) = ~saved_gplr[i]; - - GRER(gpio) = saved_grer[i]; - GFER(gpio) = saved_gfer[i]; - GPDR(gpio) = saved_gpdr[i]; - } - return 0; -} -#else -#define pxa_gpio_suspend NULL -#define pxa_gpio_resume NULL -#endif - -struct sysdev_class pxa_gpio_sysclass = { - .name = "gpio", - .suspend = pxa_gpio_suspend, - .resume = pxa_gpio_resume, -}; - -static int __init pxa_gpio_init(void) -{ - return sysdev_class_register(&pxa_gpio_sysclass); -} - -core_initcall(pxa_gpio_init); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index e296ce11658..ca9912ea78d 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -38,14 +38,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> + +#include <mach/pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/gumstix.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> - #include "generic.h" static struct resource flash_resource = { @@ -191,6 +189,11 @@ int __attribute__((weak)) am200_init(void) return 0; } +int __attribute__((weak)) am300_init(void) +{ + return 0; +} + static void __init carrier_board_init(void) { /* @@ -198,6 +201,7 @@ static void __init carrier_board_init(void) * they cannot be detected programatically */ am200_init(); + am300_init(); } static void __init gumstix_init(void) diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index da6e4422c0f..f3d220c32e0 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -24,14 +24,15 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> + +#include <mach/pxa25x.h> #include <mach/h5000.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> #include <mach/udc.h> + #include "generic.h" /* @@ -153,6 +154,13 @@ static unsigned long h5000_pin_config[] __initdata = { GPIO23_SSP1_SCLK, GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO32_I2S_SYSCLK, }; /* diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c new file mode 100644 index 00000000000..cea99fe65b9 --- /dev/null +++ b/arch/arm/mach-pxa/himalaya.c @@ -0,0 +1,166 @@ +/* + * linux/arch/arm/mach-pxa/himalaya.c + * + * Hardware definitions for the HTC Himalaya + * + * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c + * + * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/fb.h> +#include <linux/platform_device.h> + +#include <video/w100fb.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> + +#include "generic.h" + +/* ---------------------- Himalaya LCD definitions -------------------- */ + +static struct w100_gen_regs himalaya_lcd_regs = { + .lcd_format = 0x00000003, + .lcdd_cntl1 = 0x00000000, + .lcdd_cntl2 = 0x0003ffff, + .genlcd_cntl1 = 0x00fff003, + .genlcd_cntl2 = 0x00000003, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_mode himalaya4_lcd_mode = { + .xres = 240, + .yres = 320, + .left_margin = 0, + .right_margin = 31, + .upper_margin = 15, + .lower_margin = 0, + .crtc_ss = 0x80150014, + .crtc_ls = 0xa0fb00f7, + .crtc_gs = 0xc0080007, + .crtc_vpos_gs = 0x00080007, + .crtc_rev = 0x0000000a, + .crtc_dclk = 0x81700030, + .crtc_gclk = 0x8015010f, + .crtc_goe = 0x00000000, + .pll_freq = 80, + .pixclk_divider = 15, + .pixclk_divider_rotated = 15, + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .sysclk_src = CLK_SRC_PLL, +}; + +static struct w100_mode himalaya6_lcd_mode = { + .xres = 240, + .yres = 320, + .left_margin = 9, + .right_margin = 8, + .upper_margin = 5, + .lower_margin = 4, + .crtc_ss = 0x80150014, + .crtc_ls = 0xa0fb00f7, + .crtc_gs = 0xc0080007, + .crtc_vpos_gs = 0x00080007, + .crtc_rev = 0x0000000a, + .crtc_dclk = 0xa1700030, + .crtc_gclk = 0x8015010f, + .crtc_goe = 0x00000000, + .pll_freq = 95, + .pixclk_divider = 0xb, + .pixclk_divider_rotated = 4, + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 1, + .sysclk_src = CLK_SRC_PLL, +}; + +static struct w100_gpio_regs himalaya_w100_gpio_info = { + .init_data1 = 0xffff0000, /* GPIO_DATA */ + .gpio_dir1 = 0x00000000, /* GPIO_CNTL1 */ + .gpio_oe1 = 0x003c0000, /* GPIO_CNTL2 */ + .init_data2 = 0x00000000, /* GPIO_DATA2 */ + .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */ + .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */ +}; + +static struct w100fb_mach_info himalaya_fb_info = { + .num_modes = 1, + .regs = &himalaya_lcd_regs, + .gpio = &himalaya_w100_gpio_info, + .xtal_freq = 16000000, +}; + +static struct resource himalaya_fb_resources[] = { + [0] = { + .start = 0x08000000, + .end = 0x08ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device himalaya_fb_device = { + .name = "w100fb", + .id = -1, + .dev = { + .platform_data = &himalaya_fb_info, + }, + .num_resources = ARRAY_SIZE(himalaya_fb_resources), + .resource = himalaya_fb_resources, +}; + +/* ----------------------------------------------------------------------- */ + +static struct platform_device *devices[] __initdata = { + &himalaya_fb_device, +}; + +static void __init himalaya_lcd_init(void) +{ + int himalaya_boardid; + + himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */ + printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n", + himalaya_boardid); + + switch (himalaya_boardid) { + case 0x4: + himalaya_fb_info.modelist = &himalaya4_lcd_mode; + break; + case 0x6: + himalaya_fb_info.modelist = &himalaya6_lcd_mode; + break; + default: + printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n", + himalaya_boardid); + himalaya_fb_info.modelist = &himalaya4_lcd_mode; + } +} + +static void __init himalaya_init(void) +{ + himalaya_lcd_init(); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + + +MACHINE_START(HIMALAYA, "HTC Himalaya") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .init_machine = himalaya_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 013b15baa03..b6243b59d9b 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -31,8 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/idp.h> #include <mach/pxafb.h> #include <mach/bitfield.h> diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 364c5e27133..2121309b247 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -28,11 +28,8 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> +#include <mach/pxa27x.h> #include <mach/i2c.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> -#include <mach/regs-ssp.h> #include <mach/udc.h> #include <mach/mmc.h> #include <mach/pxa2xx_spi.h> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 2ae373fb567..3f2a01d6a03 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -1,19 +1,31 @@ #ifndef _COLIBRI_H_ #define _COLIBRI_H_ +/* + * common settings for all modules + */ + +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin); +#else +static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {} +#endif + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +extern void colibri_pxa3xx_init_lcd(int bl_pin); +#else +static inline void colibri_pxa3xx_init_lcd(int) {} +#endif /* physical memory regions */ -#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ -/* virtual memory regions */ -#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ +/* definitions for Colibri PXA270 */ -/* size of flash */ -#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ - -/* Ethernet Controller Davicom DM9000 */ -#define GPIO_DM9000 114 -#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) +#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ +#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */ +#define COLIBRI_PXA270_ETH_IRQ_GPIO 114 +#define COLIBRI_PXA270_ETH_IRQ \ + gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO)) #endif /* _COLIBRI_H_ */ + diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h new file mode 100644 index 00000000000..747ab1a71f2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -0,0 +1,26 @@ +/* + * Support for Cogent CSB726 + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef CSB726_H +#define CSB726_H + +#define CSB726_GPIO_IRQ_LAN 52 +#define CSB726_GPIO_IRQ_SM501 53 +#define CSB726_GPIO_MMC_DETECT 100 +#define CSB726_GPIO_MMC_RO 101 + +#define CSB726_FLASH_SIZE (64 * 1024 * 1024) +#define CSB726_FLASH_uMON (8 * 1024 * 1024) + +#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN) +#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501) + +#endif + diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h index 7804637a6df..5bd55894a48 100644 --- a/arch/arm/mach-pxa/include/mach/dma.h +++ b/arch/arm/mach-pxa/include/mach/dma.h @@ -12,35 +12,10 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -/* - * Descriptor structure for PXA's DMA engine - * Note: this structure must always be aligned to a 16-byte boundary. - */ - -typedef struct pxa_dma_desc { - volatile u32 ddadr; /* Points to the next descriptor + flags */ - volatile u32 dsadr; /* DSADR value for the current transfer */ - volatile u32 dtadr; /* DTADR value for the current transfer */ - volatile u32 dcmd; /* DCMD value for the current transfer */ -} pxa_dma_desc; - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} pxa_dma_prio; - -/* - * DMA registration - */ - -int __init pxa_init_dma(int num_ch); - -int pxa_request_dma (char *name, - pxa_dma_prio prio, - void (*irq_handler)(int, void *), - void *data); +#include <mach/hardware.h> -void pxa_free_dma (int dma_ch); +/* DMA Controller Registers Definitions */ +#define DMAC_REGS_VIRT io_p2v(0x40000000) +#include <plat/dma.h> #endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index efbd2aa9ece..f3e5509820d 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -45,6 +45,21 @@ /* e7xx IrDA power control */ #define GPIO_E7XX_IR_OFF 38 +/* e740 audio control GPIOs */ +#define GPIO_E740_WM9705_nAVDD2 16 +#define GPIO_E740_MIC_ON 40 +#define GPIO_E740_AMP_ON 41 + +/* e750 audio control GPIOs */ +#define GPIO_E750_HP_AMP_OFF 4 +#define GPIO_E750_SPK_AMP_OFF 7 +#define GPIO_E750_HP_DETECT 37 + +/* e800 audio control GPIOs */ +#define GPIO_E800_HP_DETECT 81 +#define GPIO_E800_HP_AMP_OFF 82 +#define GPIO_E800_SPK_AMP_ON 83 + /* ASIC related GPIOs */ #define GPIO_ESERIES_TMIO_IRQ 5 #define GPIO_ESERIES_TMIO_PCLR 19 diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index 2c538d8c362..b024a8b3743 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -24,42 +24,118 @@ #ifndef __ASM_ARCH_PXA_GPIO_H #define __ASM_ARCH_PXA_GPIO_H -#include <mach/pxa-regs.h> -#include <asm/irq.h> +#include <mach/irqs.h> #include <mach/hardware.h> - #include <asm-generic/gpio.h> +#define GPIO_REGS_VIRT io_p2v(0x40E00000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) + +/* GPIO Pin Level Registers */ +#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) +#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) +#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) +#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) + +/* GPIO Pin Direction Registers */ +#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) +#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) +#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) +#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) + +/* GPIO Pin Output Set Registers */ +#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) +#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) +#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) +#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) + +/* GPIO Pin Output Clear Registers */ +#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) +#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) +#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) +#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) + +/* GPIO Rising Edge Detect Registers */ +#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) +#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) +#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) +#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) + +/* GPIO Falling Edge Detect Registers */ +#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) +#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) +#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) +#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) + +/* GPIO Edge Detect Status Registers */ +#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) +#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) +#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) +#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) + +/* GPIO Alternate Function Select Registers */ +#define GAFR0_L GPIO_REG(0x0054) +#define GAFR0_U GPIO_REG(0x0058) +#define GAFR1_L GPIO_REG(0x005C) +#define GAFR1_U GPIO_REG(0x0060) +#define GAFR2_L GPIO_REG(0x0064) +#define GAFR2_U GPIO_REG(0x0068) +#define GAFR3_L GPIO_REG(0x006C) +#define GAFR3_U GPIO_REG(0x0070) + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) +#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) +#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) +#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) +#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) + -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space. - */ #define NR_BUILTIN_GPIO 128 -static inline int gpio_get_value(unsigned gpio) +#define gpio_to_bank(gpio) ((gpio) >> 5) +#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +#ifdef CONFIG_CPU_PXA26x +/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, + * as well as their Alternate Function value being '1' for GPIO in GAFRx. + */ +static inline int __gpio_is_inverted(unsigned gpio) { - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); + return cpu_is_pxa25x() && gpio > 85; } +#else +static inline int __gpio_is_inverted(unsigned gpio) { return 0; } +#endif -static inline void gpio_set_value(unsigned gpio, int value) +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static inline int __gpio_is_occupied(unsigned gpio) { - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); + if (cpu_is_pxa27x() || cpu_is_pxa25x()) { + int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; + int dir = GPDR(gpio) & GPIO_bit(gpio); + + if (__gpio_is_inverted(gpio)) + return af != 1 || dir == 0; else - GPCR(gpio) = GPIO_bit(gpio); - } else { - __gpio_set_value(gpio, value); - } + return af != 0 || dir != 0; + } else + return GPDR(gpio) & GPIO_bit(gpio); } -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) - - +#include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 099f54a41de..06abd416060 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -97,4 +97,5 @@ has detected a cable insertion; driven low otherwise. */ /* for expansion boards that can't be programatically detected */ extern int am200_init(void); +extern int am300_init(void); diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 4cb24154a5a..751b74811d0 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -25,7 +25,6 @@ /* FPGA register virtual addresses */ #define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000) -#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) #define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040) #define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050) #define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060) diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 38d68d99f58..82a399f3f9f 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -69,7 +69,7 @@ #define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) #define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) #define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) -#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) +#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3) /* * CPLD EGPIOs diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index a72869b73ee..b13dc0269a6 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -1,7 +1,6 @@ #ifndef __ASM_ARCH_MFP_PXA25X_H #define __ASM_ARCH_MFP_PXA25X_H -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index da4f85a4f99..6543c05f47e 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -8,7 +8,6 @@ * specific controller, and this should work in most cases. */ -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index 3e9211591e2..658b28ed129 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_MFP_PXA2XX_H #define __ASM_ARCH_MFP_PXA2XX_H -#include <mach/mfp.h> +#include <plat/mfp.h> /* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index bc1fb33a6e7..ae8441192ef 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_MFP_PXA300_H #define __ASM_ARCH_MFP_PXA300_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ @@ -41,6 +40,7 @@ #endif /* Chip Select */ +#define GPIO1_nCS2 MFP_CFG(GPIO1, AF1) #define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) /* AC97 */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h index 67f8385ea54..07897e61d05 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_MFP_PXA320_H #define __ASM_ARCH_MFP_PXA320_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ @@ -38,6 +37,7 @@ #define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) /* Chip Select */ +#define GPIO3_nCS2 MFP_CFG(GPIO3, AF1) #define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) /* AC97 */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h index 1f6b35c015d..d375195d982 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h @@ -1,68 +1,9 @@ #ifndef __ASM_ARCH_MFP_PXA3XX_H #define __ASM_ARCH_MFP_PXA3XX_H -#define MFPR_BASE (0x40e10000) -#define MFPR_SIZE (PAGE_SIZE) - -/* MFPR register bit definitions */ -#define MFPR_PULL_SEL (0x1 << 15) -#define MFPR_PULLUP_EN (0x1 << 14) -#define MFPR_PULLDOWN_EN (0x1 << 13) -#define MFPR_SLEEP_SEL (0x1 << 9) -#define MFPR_SLEEP_OE_N (0x1 << 7) -#define MFPR_EDGE_CLEAR (0x1 << 6) -#define MFPR_EDGE_FALL_EN (0x1 << 5) -#define MFPR_EDGE_RISE_EN (0x1 << 4) - -#define MFPR_SLEEP_DATA(x) ((x) << 8) -#define MFPR_DRIVE(x) (((x) & 0x7) << 10) -#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) +#include <plat/mfp.h> -#define MFPR_EDGE_NONE (0) -#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) -#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) -#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) - -/* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) - * - * Input 0 X(0) X(0) X(0) 0 - * Drive 0 0 0 0 X(1) 0 - * Drive 1 0 1 X(1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFPR_LPM_INPUT (0) -#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) -#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) -#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) -#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) -#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) -#define MFPR_LPM_MASK (0xe080) - -/* - * The pullup and pulldown state of the MFP pin at run mode is by default - * determined by the selected alternate function. In case that some buggy - * devices need to override this default behavior, the definitions below - * indicates the setting of corresponding MFPR bits - * - * Definition pull_sel pullup_en pulldown_en - * MFPR_PULL_NONE 0 0 0 - * MFPR_PULL_LOW 1 0 1 - * MFPR_PULL_HIGH 1 1 0 - * MFPR_PULL_BOTH 1 1 1 - */ -#define MFPR_PULL_NONE (0) -#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) -#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) -#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) +#define MFPR_BASE (0x40e10000) /* PXA3xx common MFP configurations - processor specific ones defined * in mfp-pxa300.h and mfp-pxa320.h @@ -197,56 +138,21 @@ #define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) #define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by pxa3xx_mfp_init_addr() - * - * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" - * structure, which represents a range of MFP pins from "start" to - * "end", with the offset begining at "offset", to define a single - * pin, let "end" = -1 - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct pxa3xx_mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -/* - * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access - * to the MFPR register - */ -unsigned long pxa3xx_mfp_read(int mfp); -void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); - -/* - * pxa3xx_mfp_config - configure the MFPR registers - * - * used by board specific initialization code - */ -void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); - -/* - * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin - * index and MFPR register offset - * - * used by processor specific code +/* NOTE: usage of these two functions is not recommended, + * use pxa3xx_mfp_config() instead. */ -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -void __init pxa3xx_init_mfp(void); +static inline unsigned long pxa3xx_mfp_read(int mfp) +{ + return mfp_read(mfp); +} + +static inline void pxa3xx_mfp_write(int mfp, unsigned long val) +{ + mfp_write(mfp, val); +} + +static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num) +{ + mfp_config(mfp_cfg, num); +} #endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h index fa73f56a137..0d119d3b922 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_MFP_PXA9xx_H #define __ASM_ARCH_MFP_PXA9xx_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index cfca8155be7..297387ec361 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -15,8 +15,8 @@ #ifndef __ARCH_PXA_MTD_XIP_H__ #define __ARCH_PXA_MTD_XIP_H__ -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ost.h> +#include <mach/regs-intc.h> #define xip_irqpending() (ICIP & ICMR) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h new file mode 100644 index 00000000000..7c295a48d78 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -0,0 +1,109 @@ +/* + * GPIOs and interrupts for Palm LifeDrive Handheld Computer + * + * Authors: Alex Osborne <ato@meshy.org> + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMLD_H_ +#define _INCLUDE_PALMLD_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMLD_GPIO_RESET 1 +#define GPIO_NR_PALMLD_POWER_DETECT 4 +#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMLD_POWER_SWITCH 12 +#define GPIO_NR_PALMLD_EARPHONE_DETECT 13 +#define GPIO_NR_PALMLD_LOCK_SWITCH 15 + +/* SD/MMC */ +#define GPIO_NR_PALMLD_SD_DETECT_N 14 +#define GPIO_NR_PALMLD_SD_POWER 114 +#define GPIO_NR_PALMLD_SD_READONLY 116 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMLD_WM9712_IRQ 27 + +/* IRDA */ +#define GPIO_NR_PALMLD_IR_DISABLE 108 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMLD_BL_POWER 19 +#define GPIO_NR_PALMLD_LCD_POWER 96 + +/* LCD BORDER */ +#define GPIO_NR_PALMLD_BORDER_SWITCH 21 +#define GPIO_NR_PALMLD_BORDER_SELECT 22 + +/* BLUETOOTH */ +#define GPIO_NR_PALMLD_BT_POWER 17 +#define GPIO_NR_PALMLD_BT_RESET 83 + +/* PCMCIA (WiFi) */ +#define GPIO_NR_PALMLD_PCMCIA_READY 38 +#define GPIO_NR_PALMLD_PCMCIA_POWER 36 +#define GPIO_NR_PALMLD_PCMCIA_RESET 81 + +/* LEDs */ +#define GPIO_NR_PALMLD_LED_GREEN 52 +#define GPIO_NR_PALMLD_LED_AMBER 94 + +/* IDE */ +#define GPIO_NR_PALMLD_IDE_IRQ 95 +#define GPIO_NR_PALMLD_IDE_RESET 98 +#define GPIO_NR_PALMLD_IDE_PWEN 115 + +/* USB */ +#define GPIO_NR_PALMLD_USB_DETECT_N 3 +#define GPIO_NR_PALMLD_USB_READY 86 +#define GPIO_NR_PALMLD_USB_RESET 88 +#define GPIO_NR_PALMLD_USB_INT 106 +#define GPIO_NR_PALMLD_USB_POWER 118 +/* 20, 53 and 86 are usb related too */ + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET) +#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N) +#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ) +#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ) + + +/** HERE ARE INIT VALUES **/ + +/* IO mappings */ +#define PALMLD_USB_PHYS PXA_CS2_PHYS +#define PALMLD_USB_VIRT 0xf0000000 +#define PALMLD_USB_SIZE 0x00100000 + +#define PALMLD_IDE_PHYS 0x20000000 +#define PALMLD_IDE_VIRT 0xf1000000 +#define PALMLD_IDE_SIZE 0x00100000 + +#define PALMLD_PHYS_IO_START 0x40000000 + +/* BATTERY */ +#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ +#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */ + +#define PALMLD_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMLD_MAX_INTENSITY 0xFE +#define PALMLD_DEFAULT_INTENSITY 0x7E +#define PALMLD_LIMIT_MASK 0x7F +#define PALMLD_PRESCALER 0x3F +#define PALMLD_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h new file mode 100644 index 00000000000..94db2881f04 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -0,0 +1,84 @@ +/* + * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer + * + * Authors: Ales Snuparek <snuparek@atlas.cz> + * Marek Vasut <marek.vasut@gmail.com> + * Justin Kendrick <twilightsentry@gmail.com> + * RichardT5 <richard_t5@users.sourceforge.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMT5_H_ +#define _INCLUDE_PALMT5_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMT5_GPIO_RESET 1 + +#define GPIO_NR_PALMT5_POWER_DETECT 90 +#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMT5_EARPHONE_DETECT 107 + +/* SD/MMC */ +#define GPIO_NR_PALMT5_SD_DETECT_N 14 +#define GPIO_NR_PALMT5_SD_POWER 114 +#define GPIO_NR_PALMT5_SD_READONLY 115 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMT5_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMT5_IR_DISABLE 40 + +/* USB */ +#define GPIO_NR_PALMT5_USB_DETECT_N 15 +#define GPIO_NR_PALMT5_USB_POWER 95 +#define GPIO_NR_PALMT5_USB_PULLUP 93 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMT5_BL_POWER 84 +#define GPIO_NR_PALMT5_LCD_POWER 96 + +/* BLUETOOTH */ +#define GPIO_NR_PALMT5_BT_POWER 17 +#define GPIO_NR_PALMT5_BT_RESET 83 + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) +#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ) +#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT) +#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET) + +/** HERE ARE INIT VALUES **/ + +/* Various addresses */ +#define PALMT5_PHYS_RAM_START 0xa0000000 +#define PALMT5_PHYS_IO_START 0x40000000 + +/* TOUCHSCREEN */ +#define AC97_LINK_FRAME 21 + +/* BATTERY */ +#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#define PALMT5_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMT5_MAX_INTENSITY 0xFE +#define PALMT5_DEFAULT_INTENSITY 0x7E +#define PALMT5_LIMIT_MASK 0x7F +#define PALMT5_PRESCALER 0x3F +#define PALMT5_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index 83342469aca..a6eeef8a075 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -27,3 +27,13 @@ extern void pxa27x_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); extern int pxa_pm_enter(suspend_state_t state); + +/* NOTE: this is for PM debugging on Lubbock, it's really a big + * ugly, but let's keep the crap minimum here, instead of direct + * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c + */ +#ifdef CONFIG_ARCH_LUBBOCK +extern void lubbock_set_hexled(uint32_t value); +#else +#define lubbock_set_hexled(x) +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h deleted file mode 100644 index 31d615aa772..00000000000 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/pxa-regs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PXA_REGS_H -#define __PXA_REGS_H - -#include <mach/hardware.h> - -/* - * PXA Chip selects - */ - -#define PXA_CS0_PHYS 0x00000000 -#define PXA_CS1_PHYS 0x04000000 -#define PXA_CS2_PHYS 0x08000000 -#define PXA_CS3_PHYS 0x0C000000 -#define PXA_CS4_PHYS 0x10000000 -#define PXA_CS5_PHYS 0x14000000 - - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ - -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ - - - -/* - * DMA Controller - */ -#define DCSR(x) __REG2(0x40000000, (x) << 2) - -#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ -#endif - -#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ -#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ - -#define DRCMR(n) (*(((n) < 64) ? \ - &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ - &__REG2(0x40001100, ((n) & 0x3f) << 2))) - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ - -#define DDADR(x) __REG2(0x40000200, (x) << 4) -#define DSADR(x) __REG2(0x40000204, (x) << 4) -#define DTADR(x) __REG2(0x40000208, (x) << 4) -#define DCMD(x) __REG2(0x4000020c, (x) << 4) - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ -#define DDADR_STOP (1 << 0) /* Stop (read / write) */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* - * Real Time Clock - */ - -#define RCNR __REG(0x40900000) /* RTC Count Register */ -#define RTAR __REG(0x40900004) /* RTC Alarm Register */ -#define RTSR __REG(0x40900008) /* RTC Status Register */ -#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ - -#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - - -/* - * OS Timer & Match Registers - */ - -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ - -#define OSSR_M3 (1 << 3) /* Match status channel 3 */ -#define OSSR_M2 (1 << 2) /* Match status channel 2 */ -#define OSSR_M1 (1 << 1) /* Match status channel 1 */ -#define OSSR_M0 (1 << 0) /* Match status channel 0 */ - -#define OWER_WME (1 << 0) /* Watchdog Match Enable */ - -#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ -#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ -#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ -#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -/* - * General Purpose I/O - */ - -#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ -#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ -#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ - -#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ -#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ -#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ - -#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ -#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ -#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ - -#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ -#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ -#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ - -#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ -#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ -#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ - -#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ -#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ - -#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ -#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ -#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ - -#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ -#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ -#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ -#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ -#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ - -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) -#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) -#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) -#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) -#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) -#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) -#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) -#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ - ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) - -#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h new file mode 100644 index 00000000000..508c3ba1f4d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa25x.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA25x_H +#define __MACH_PXA25x_H + +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> + +#endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h new file mode 100644 index 00000000000..6876e16c297 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -0,0 +1,19 @@ +#ifndef __MACH_PXA27x_H +#define __MACH_PXA27x_H + +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> + +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ +#endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h index d83393e2527..1209c44aa6f 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h @@ -3,6 +3,8 @@ #warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h +#include <mach/gpio.h> + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index 77102d695cc..4fcddd9cab7 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -14,6 +14,19 @@ #ifndef __PXA2XX_REGS_H #define __PXA2XX_REGS_H +#include <mach/hardware.h> + +/* + * PXA Chip selects + */ + +#define PXA_CS0_PHYS 0x00000000 +#define PXA_CS1_PHYS 0x04000000 +#define PXA_CS2_PHYS 0x08000000 +#define PXA_CS3_PHYS 0x0C000000 +#define PXA_CS4_PHYS 0x10000000 +#define PXA_CS5_PHYS 0x14000000 + /* * Memory controller */ @@ -69,24 +82,6 @@ #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - -#ifdef CONFIG_PXA27x - -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - -#endif - - /* * Power Manager */ diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h new file mode 100644 index 00000000000..2f33076c9e4 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa300.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA300_H +#define __MACH_PXA300_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa300.h> + +#endif /* __MACH_PXA300_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h new file mode 100644 index 00000000000..cab78e90327 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa320.h @@ -0,0 +1,9 @@ +#ifndef __MACH_PXA320_H +#define __MACH_PXA320_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa320.h> + +#endif /* __MACH_PXA320_H */ + diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index bcf3fb2c4b3..7d1a059b3d4 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -13,6 +13,17 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H +#include <mach/hardware.h> + +/* + * Static Chip Selects + */ + +#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */ +#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */ +#define PXA3xx_CS2_PHYS (0x10000000) +#define PXA3xx_CS3_PHYS (0x14000000) + /* * Oscillator Configuration Register (OSCC) */ diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h new file mode 100644 index 00000000000..d45f76a9b54 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa930.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA930_H +#define __MACH_PXA930_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa930.h> + +#endif /* __MACH_PXA930_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h new file mode 100644 index 00000000000..ad23e74b762 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-intc.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_REGS_INTC_H +#define __ASM_MACH_REGS_INTC_H + +#include <mach/hardware.h> + +/* + * Interrupt Controller + */ + +#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ +#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ +#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ +#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ +#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ +#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +#endif /* __ASM_MACH_REGS_INTC_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h new file mode 100644 index 00000000000..a3e5f86ef67 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-ost.h @@ -0,0 +1,34 @@ +#ifndef __ASM_MACH_REGS_OST_H +#define __ASM_MACH_REGS_OST_H + +#include <mach/hardware.h> + +/* + * OS Timer & Match Registers + */ + +#define OSMR0 __REG(0x40A00000) /* */ +#define OSMR1 __REG(0x40A00004) /* */ +#define OSMR2 __REG(0x40A00008) /* */ +#define OSMR3 __REG(0x40A0000C) /* */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ +#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ +#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ + +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + +#endif /* __ASM_MACH_REGS_OST_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/include/mach/regs-rtc.h new file mode 100644 index 00000000000..f0e4a589bbe --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-rtc.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_REGS_RTC_H +#define __ASM_MACH_REGS_RTC_H + +#include <mach/hardware.h> + +/* + * Real Time Clock + */ + +#define RCNR __REG(0x40900000) /* RTC Count Register */ +#define RTAR __REG(0x40900004) /* RTC Alarm Register */ +#define RTSR __REG(0x40900008) /* RTC Status Register */ +#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ + +#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + +#endif /* __ASM_MACH_REGS_RTC_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h index cf31986f6f0..6a2ed35acd5 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -37,7 +37,6 @@ #if defined(CONFIG_PXA25x) #define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ - #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ @@ -50,7 +49,7 @@ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_ACS (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif @@ -109,6 +108,11 @@ #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ +#if defined(CONFIG_PXA3xx) +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#endif + #define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ #define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ #define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h index 0f381e69299..d1fce8b6d10 100644 --- a/arch/arm/mach-pxa/include/mach/system.h +++ b/arch/arm/mach-pxa/include/mach/system.h @@ -13,7 +13,6 @@ #include <asm/proc-fns.h> #include "hardware.h" #include "pxa2xx-regs.h" -#include "pxa-regs.h" static inline void arch_idle(void) { @@ -21,4 +20,4 @@ static inline void arch_idle(void) } -void arch_reset(char mode); +void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index f4b029c0395..5706cea95d1 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -35,7 +35,8 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { - if (machine_is_littleton() || machine_is_intelmote2()) + if (machine_is_littleton() || machine_is_intelmote2() + || machine_is_csb726()) UART = STUART; } diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index fa69c3a6a38..f6e0300e4f6 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -20,7 +20,8 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> +#include <mach/gpio.h> +#include <mach/regs-intc.h> #include "generic.h" @@ -51,6 +52,72 @@ static struct irq_chip pxa_internal_irq_chip = { .unmask = pxa_unmask_irq, }; +/* + * GPIO IRQs for GPIO 0 and 1 + */ +static int pxa_set_low_gpio_type(unsigned int irq, unsigned int type) +{ + int gpio = irq - IRQ_GPIO0; + + if (__gpio_is_occupied(gpio)) { + pr_err("%s failed: GPIO is configured\n", __func__); + return -EINVAL; + } + + if (type & IRQ_TYPE_EDGE_RISING) + GRER0 |= GPIO_bit(gpio); + else + GRER0 &= ~GPIO_bit(gpio); + + if (type & IRQ_TYPE_EDGE_FALLING) + GFER0 |= GPIO_bit(gpio); + else + GFER0 &= ~GPIO_bit(gpio); + + return 0; +} + +static void pxa_ack_low_gpio(unsigned int irq) +{ + GEDR0 = (1 << (irq - IRQ_GPIO0)); +} + +static void pxa_mask_low_gpio(unsigned int irq) +{ + ICMR &= ~(1 << (irq - PXA_IRQ(0))); +} + +static void pxa_unmask_low_gpio(unsigned int irq) +{ + ICMR |= 1 << (irq - PXA_IRQ(0)); +} + +static struct irq_chip pxa_low_gpio_chip = { + .name = "GPIO-l", + .ack = pxa_ack_low_gpio, + .mask = pxa_mask_low_gpio, + .unmask = pxa_unmask_low_gpio, + .set_type = pxa_set_low_gpio_type, +}; + +static void __init pxa_init_low_gpio_irq(set_wake_t fn) +{ + int irq; + + /* clear edge detection on GPIO 0 and 1 */ + GFER0 &= ~0x3; + GRER0 &= ~0x3; + GEDR0 = 0x3; + + for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { + set_irq_chip(irq, &pxa_low_gpio_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID); + } + + pxa_low_gpio_chip.set_wake = fn; +} + void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq; @@ -72,6 +139,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) } pxa_internal_irq_chip.set_wake = fn; + pxa_init_low_gpio_irq(fn); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c index 18b20d46941..8b9c17142d5 100644 --- a/arch/arm/mach-pxa/leds-idp.c +++ b/arch/arm/mach-pxa/leds-idp.c @@ -18,7 +18,7 @@ #include <asm/leds.h> #include <asm/system.h> -#include <mach/pxa-regs.h> +#include <mach/pxa25x.h> #include <mach/idp.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c index 1a258029c33..e26d5efe196 100644 --- a/arch/arm/mach-pxa/leds-lubbock.c +++ b/arch/arm/mach-pxa/leds-lubbock.c @@ -16,7 +16,7 @@ #include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <mach/pxa-regs.h> +#include <mach/pxa25x.h> #include <mach/lubbock.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c index 95e06b84963..db4af5eee8b 100644 --- a/arch/arm/mach-pxa/leds-mainstone.c +++ b/arch/arm/mach-pxa/leds-mainstone.c @@ -16,7 +16,7 @@ #include <asm/leds.h> #include <asm/system.h> -#include <mach/pxa-regs.h> +#include <mach/pxa27x.h> #include <mach/mainstone.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 31da7f3c06f..e13f6a81c22 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -39,8 +39,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include <mach/pxafb.h> #include <mach/ssp.h> #include <mach/pxa2xx_spi.h> diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index de3f67daaac..d64395f26a3 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -38,9 +38,8 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> +#include <mach/gpio.h> #include <mach/lpd270.h> #include <mach/audio.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index bff704354c1..f04c8333dff 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -41,15 +41,15 @@ #include <asm/hardware/sa1111.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> +#include <mach/gpio.h> #include <mach/audio.h> #include <mach/lubbock.h> #include <mach/udc.h> #include <mach/irda.h> #include <mach/pxafb.h> #include <mach/mmc.h> +#include <mach/pm.h> #include "generic.h" #include "clock.h" @@ -113,8 +113,14 @@ static unsigned long lubbock_pin_config[] __initdata = { GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, }; +#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) +void lubbock_set_hexled(uint32_t value) +{ + LUB_HEXLED = value; +} + void lubbock_set_misc_wr(unsigned int mask, unsigned int set) { unsigned long flags; diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 21b821e1a60..d46b36746be 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,14 +25,14 @@ #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> +#include <linux/usb/gpio_vbus.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> + +#include <mach/pxa27x.h> #include <mach/magician.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> #include <mach/pxafb.h> #include <mach/i2c.h> #include <mach/mmc.h> @@ -66,6 +66,11 @@ static unsigned long magician_pin_config[] __initdata = { GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, + /* SSP 1 */ + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO25_SSP1_TXD, + /* SSP 2 */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, @@ -148,22 +153,31 @@ static struct pxaficp_platform_data magician_ficp_info = { * GPIO Keys */ +#define INIT_KEY(_code, _gpio, _desc) \ + { \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ + } + static struct gpio_keys_button magician_button_table[] = { - {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"}, - {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"}, - {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"}, - {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"}, - {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"}, - {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"}, - {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"}, - {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"}, - {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"}, - {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"}, - {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"}, - {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"}, - {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"}, - {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"}, - {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"}, + INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"), + INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"), + INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"), + INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"), + INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"), + INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"), + INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"), + INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"), + INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"), + INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"), + INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"), + INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"), + INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"), + INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"), + INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"), }; static struct gpio_keys_platform_data gpio_keys_data = { @@ -189,7 +203,7 @@ static struct platform_device gpio_keys = { static struct resource egpio_resources[] = { [0] = { .start = PXA_CS3_PHYS, - .end = PXA_CS3_PHYS + 0x20, + .end = PXA_CS3_PHYS + 0x20 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -420,7 +434,7 @@ static struct gpio_led gpio_leds[] = { }, { .name = "magician::phone_bl", - .default_trigger = "none", + .default_trigger = "backlight", .gpio = GPIO103_MAGICIAN_LED_KP, }, }; @@ -468,8 +482,6 @@ static struct pasic3_led pasic3_leds[] = { }, }; -static struct platform_device pasic3; - static struct pasic3_leds_machinfo pasic3_leds_info = { .num_leds = ARRAY_SIZE(pasic3_leds), .power_gpio = EGPIO_MAGICIAN_LED_POWER, @@ -511,6 +523,31 @@ static struct platform_device pasic3 = { }; /* + * USB "Transceiver" + */ + +static struct resource gpio_vbus_resource = { + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, +}; + +static struct gpio_vbus_mach_info gpio_vbus_info = { + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, +}; + +static struct platform_device gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .num_resources = 1, + .resource = &gpio_vbus_resource, + .dev = { + .platform_data = &gpio_vbus_info, + }, +}; + +/* * External power */ @@ -586,15 +623,17 @@ static struct pda_power_pdata power_supply_info = { static struct resource power_supply_resources[] = { [0] = { .name = "ac", - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_AC, - .end = IRQ_MAGICIAN_AC, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, [1] = { .name = "usb", - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_AC, - .end = IRQ_MAGICIAN_AC, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, }; @@ -688,11 +727,9 @@ static void magician_set_vpp(struct map_info *map, int vpp) gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); } -#define PXA_CS_SIZE 0x04000000 - static struct resource strataflash_resource = { .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1, + .end = PXA_CS0_PHYS + SZ_64M - 1, .flags = IORESOURCE_MEM, }; @@ -720,6 +757,7 @@ static struct platform_device *devices[] __initdata = { &egpio, &backlight, &pasic3, + &gpio_vbus, &power_supply, &strataflash, &leds_gpio, @@ -743,6 +781,7 @@ static void __init magician_init(void) gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1); pxa_set_ficp_info(&magician_ficp_info); } + pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 5f224968043..a6c8429e975 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -41,9 +41,8 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> +#include <mach/gpio.h> #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 33626de8cbf..7ffb91d64c3 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -18,15 +18,12 @@ #include <linux/init.h> #include <linux/sysdev.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/gpio.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> #include "generic.h" -#define gpio_to_bank(gpio) ((gpio) >> 5) - #define PGSR(x) __REG2(0x40F00020, (x) << 2) #define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3) #define GAFR_L(x) __GAFR(0, x) diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index eb197a6e8e9..7a270eecd48 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -20,183 +20,9 @@ #include <linux/sysdev.h> #include <mach/hardware.h> -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> #include <mach/pxa3xx-regs.h> -/* mfp_spin_lock is used to ensure that MFP register configuration - * (most likely a read-modify-write operation) is atomic, and that - * mfp_table[] is consistent - */ -static DEFINE_SPINLOCK(mfp_spin_lock); - -static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE); - -struct pxa3xx_mfp_pin { - unsigned long config; /* -1 for not configured */ - unsigned long mfpr_off; /* MFPRxx Register offset */ - unsigned long mfpr_run; /* Run-Mode Register Value */ - unsigned long mfpr_lpm; /* Low Power Mode Register Value */ -}; - -static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; - -/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ -static const unsigned long mfpr_lpm[] = { - MFPR_LPM_INPUT, - MFPR_LPM_DRIVE_LOW, - MFPR_LPM_DRIVE_HIGH, - MFPR_LPM_PULL_LOW, - MFPR_LPM_PULL_HIGH, - MFPR_LPM_FLOAT, -}; - -/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ -static const unsigned long mfpr_pull[] = { - MFPR_PULL_NONE, - MFPR_PULL_LOW, - MFPR_PULL_HIGH, - MFPR_PULL_BOTH, -}; - -/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ -static const unsigned long mfpr_edge[] = { - MFPR_EDGE_NONE, - MFPR_EDGE_RISE, - MFPR_EDGE_FALL, - MFPR_EDGE_BOTH, -}; - -#define mfpr_readl(off) \ - __raw_readl(mfpr_mmio_base + (off)) - -#define mfpr_writel(off, val) \ - __raw_writel(val, mfpr_mmio_base + (off)) - -#define mfp_configured(p) ((p)->config != -1) - -/* - * perform a read-back of any MFPR register to make sure the - * previous writings are finished - */ -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) - -static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p) -{ - if (mfp_configured(p)) - mfpr_writel(p->mfpr_off, p->mfpr_run); -} - -static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p) -{ - if (mfp_configured(p)) { - unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR; - if (mfpr_clr != p->mfpr_run) - mfpr_writel(p->mfpr_off, mfpr_clr); - if (p->mfpr_lpm != mfpr_clr) - mfpr_writel(p->mfpr_off, p->mfpr_lpm); - } -} - -void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num) -{ - unsigned long flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - for (i = 0; i < num; i++, mfp_cfgs++) { - unsigned long tmp, c = *mfp_cfgs; - struct pxa3xx_mfp_pin *p; - int pin, af, drv, lpm, edge, pull; - - pin = MFP_PIN(c); - BUG_ON(pin >= MFP_PIN_MAX); - p = &mfp_table[pin]; - - af = MFP_AF(c); - drv = MFP_DS(c); - lpm = MFP_LPM_STATE(c); - edge = MFP_LPM_EDGE(c); - pull = MFP_PULL(c); - - /* run-mode pull settings will conflict with MFPR bits of - * low power mode state, calculate mfpr_run and mfpr_lpm - * individually if pull != MFP_PULL_NONE - */ - tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv); - - if (likely(pull == MFP_PULL_NONE)) { - p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; - p->mfpr_lpm = p->mfpr_run; - } else { - p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; - p->mfpr_run = tmp | mfpr_pull[pull]; - } - - p->config = c; __mfp_config_run(p); - } - - mfpr_sync(); - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -unsigned long pxa3xx_mfp_read(int mfp) -{ - unsigned long val, flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - val = mfpr_readl(mfp_table[mfp].mfpr_off); - spin_unlock_irqrestore(&mfp_spin_lock, flags); - - return val; -} - -void pxa3xx_mfp_write(int mfp, unsigned long val) -{ - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - mfpr_writel(mfp_table[mfp].mfpr_off, val); - mfpr_sync(); - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) -{ - struct pxa3xx_mfp_addr_map *p; - unsigned long offset, flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - for (p = map; p->start != MFP_PIN_INVALID; p++) { - offset = p->offset; - i = p->start; - - do { - mfp_table[i].mfpr_off = offset; - mfp_table[i].mfpr_run = 0; - mfp_table[i].mfpr_lpm = 0; - offset += 4; i++; - } while ((i <= p->end) && (p->end != -1)); - } - - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void __init pxa3xx_init_mfp(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mfp_table); i++) - mfp_table[i].config = -1; -} - #ifdef CONFIG_PM /* * Configure the MFPs appropriately for suspend/resume. @@ -207,23 +33,13 @@ void __init pxa3xx_init_mfp(void) */ static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state) { - int pin; - - for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { - struct pxa3xx_mfp_pin *p = &mfp_table[pin]; - __mfp_config_lpm(p); - } + mfp_config_lpm(); return 0; } static int pxa3xx_mfp_resume(struct sys_device *d) { - int pin; - - for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { - struct pxa3xx_mfp_pin *p = &mfp_table[pin]; - __mfp_config_run(p); - } + mfp_config_run(); /* clear RDH bit when MFP settings are restored * @@ -231,7 +47,6 @@ static int pxa3xx_mfp_resume(struct sys_device *d) * preserve them here in case they will be referenced later */ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - return 0; } #else diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 2b427e015b6..97c93a7a285 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -36,13 +36,15 @@ #include <linux/power_supply.h> #include <linux/wm97xx_batt.h> #include <linux/mtd/physmap.h> +#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa27x.h> + +#include <mach/pxa27x.h> +#include <mach/regs-rtc.h> #include <mach/pxa27x_keypad.h> #include <mach/pxafb.h> -#include <mach/pxa2xx-regs.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> @@ -411,21 +413,6 @@ static void gsm_exit(void) /* * USB UDC */ -static void udc_power_command(int cmd) -{ - switch (cmd) { - case PXA2XX_UDC_CMD_DISCONNECT: - gpio_set_value(GPIO22_USB_ENABLE, 0); - break; - case PXA2XX_UDC_CMD_CONNECT: - gpio_set_value(GPIO22_USB_ENABLE, 1); - break; - default: - printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd); - break; - } -} - static int is_usb_connected(void) { return !gpio_get_value(GPIO13_nUSB_DETECT); @@ -433,24 +420,15 @@ static int is_usb_connected(void) static struct pxa2xx_udc_mach_info mioa701_udc_info = { .udc_is_connected = is_usb_connected, - .udc_command = udc_power_command, + .gpio_pullup = GPIO22_USB_ENABLE, }; -struct gpio_ress udc_gpios[] = { - MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable") +struct gpio_vbus_mach_info gpio_vbus_data = { + .gpio_vbus = GPIO13_nUSB_DETECT, + .gpio_vbus_inverted = 1, + .gpio_pullup = -1, }; -static int __init udc_init(void) -{ - pxa_set_udc_info(&mioa701_udc_info); - return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios)); -} - -static void udc_exit(void) -{ - mio_gpio_free(ARRAY_AND_SIZE(udc_gpios)); -} - /* * SDIO/MMC Card controller */ @@ -789,6 +767,7 @@ MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL) MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) +MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, @@ -800,7 +779,8 @@ static struct platform_device *devices[] __initdata = { &mioa701_sound, &power_dev, &strataflash, - &mioa701_board + &gpio_vbus, + &mioa701_board, }; static void mioa701_machine_exit(void); @@ -808,13 +788,13 @@ static void mioa701_machine_exit(void); static void mioa701_poweroff(void) { mioa701_machine_exit(); - arm_machine_restart('s'); + arm_machine_restart('s', NULL); } -static void mioa701_restart(char c) +static void mioa701_restart(char c, const char *cmd) { mioa701_machine_exit(); - arm_machine_restart('s'); + arm_machine_restart('s', cmd); } struct gpio_ress global_gpios[] = { @@ -837,7 +817,7 @@ static void __init mioa701_machine_init(void) pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); - udc_init(); + pxa_set_udc_info(&mioa701_udc_info); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -850,7 +830,6 @@ static void __init mioa701_machine_init(void) static void mioa701_machine_exit(void) { - udc_exit(); bootstrap_exit(); gsm_exit(); } diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 8a73814126b..a65713ce019 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -19,10 +19,10 @@ #include <linux/types.h> #include <linux/usb/isp116x.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> + +#include <mach/pxa25x.h> #include "generic.h" static void isp116x_pfm_delay(struct device *dev, int delay) diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c new file mode 100644 index 00000000000..8587477a9bb --- /dev/null +++ b/arch/arm/mach-pxa/palmld.c @@ -0,0 +1,565 @@ +/* + * Hardware definitions for Palm LifeDrive + * + * Author: Marek Vasut <marek.vasut@gmail.com> + * + * Based on work of: + * Alex Osborne <ato@meshy.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/pxa27x.h> +#include <mach/audio.h> +#include <mach/palmld.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/irda.h> +#include <mach/pxa27x_keypad.h> +#include <mach/palmasoc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmld_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO116_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO108_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* GPIO KEYS */ + GPIO10_GPIO, /* hotsync button */ + GPIO12_GPIO, /* power switch */ + GPIO15_GPIO, /* lock switch */ + + /* LEDs */ + GPIO52_GPIO, /* green led */ + GPIO94_GPIO, /* orange led */ + + /* PCMCIA */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO36_GPIO, /* wifi power */ + GPIO38_GPIO, /* wifi ready */ + GPIO81_GPIO, /* wifi reset */ + + /* HDD */ + GPIO95_GPIO, /* HDD irq */ + GPIO115_GPIO, /* HDD power */ + + /* MISC */ + GPIO13_GPIO, /* earphone detect */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int, + void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), + palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMLD_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMLD_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); +err: + return err; +} + +static void palmld_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMLD_SD_READONLY); + gpio_free(GPIO_NR_PALMLD_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); +} + +static void palmld_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmld_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY); +} + +static struct pxamci_platform_data palmld_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmld_mci_power, + .get_ro = palmld_mci_get_ro, + .init = palmld_mci_init, + .exit = palmld_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmld_matrix_keys[] = { + KEY(0, 1, KEY_F2), + KEY(0, 2, KEY_UP), + + KEY(1, 0, KEY_F3), + KEY(1, 1, KEY_F4), + KEY(1, 2, KEY_RIGHT), + + KEY(2, 0, KEY_F1), + KEY(2, 1, KEY_F5), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_F6), + KEY(3, 1, KEY_ENTER), + KEY(3, 2, KEY_LEFT), +}; + +static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmld_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmld_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmld_pxa_buttons[] = { + {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, + {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" }, + {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" }, +}; + +static struct gpio_keys_platform_data palmld_pxa_keys_data = { + .buttons = palmld_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmld_pxa_buttons), +}; + +static struct platform_device palmld_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmld_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmld_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMLD_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMLD_BL_POWER); +err: + return ret; +} + +static int palmld_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness); + return brightness; +} + +static void palmld_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_BL_POWER); + gpio_free(GPIO_NR_PALMLD_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmld_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMLD_MAX_INTENSITY, + .dft_brightness = PALMLD_MAX_INTENSITY, + .pwm_period_ns = PALMLD_PERIOD_NS, + .init = palmld_backlight_init, + .notify = palmld_backlight_notify, + .exit = palmld_backlight_exit, +}; + +static struct platform_device palmld_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmld_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmld_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMLD_IR_DISABLE); +err: + return err; +} + +static void palmld_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_IR_DISABLE); +} + +static void palmld_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmld_ficp_platform_data = { + .startup = palmld_irda_startup, + .shutdown = palmld_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmld_irda_transceiver_mode, +}; + +/****************************************************************************** + * LEDs + ******************************************************************************/ +struct gpio_led gpio_leds[] = { +{ + .name = "palmld:green:led", + .default_trigger = "none", + .gpio = GPIO_NR_PALMLD_LED_GREEN, +}, { + .name = "palmld:amber:led", + .default_trigger = "none", + .gpio = GPIO_NR_PALMLD_LED_AMBER, +}, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device palmld_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + } +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB"); + if (ret) + goto err2; + ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N); + if (ret) + goto err3; + + return 0; + +err3: + gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); +err2: + gpio_free(GPIO_NR_PALMLD_POWER_DETECT); +err1: + return ret; +} + +static int palmld_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT); +} + +static int palmld_is_usb_online(void) +{ + return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); + gpio_free(GPIO_NR_PALMLD_POWER_DETECT); +} + +static char *palmld_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmld_is_ac_online, + .is_usb_online = palmld_is_usb_online, + .exit = power_supply_exit, + .supplied_to = palmld_supplicants, + .num_supplicants = ARRAY_SIZE(palmld_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMLD_BAT_MAX_VOLTAGE, + .min_voltage = PALMLD_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmld_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmld_lcd_screen = { + .modes = palmld_lcd_modes, + .num_modes = ARRAY_SIZE(palmld_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmld_pxa_keys, +#endif + &palmld_backlight, + &palmld_leds, + &power_supply, +}; + +static struct map_desc palmld_io_desc[] __initdata = { +{ + .virtual = PALMLD_IDE_VIRT, + .pfn = __phys_to_pfn(PALMLD_IDE_PHYS), + .length = PALMLD_IDE_SIZE, + .type = MT_DEVICE +}, +{ + .virtual = PALMLD_USB_VIRT, + .pfn = __phys_to_pfn(PALMLD_USB_PHYS), + .length = PALMLD_USB_SIZE, + .type = MT_DEVICE +}, +}; + +static void __init palmld_map_io(void) +{ + pxa_map_io(); + iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc)); +} + +static void __init palmld_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); + + set_pxa_fb_info(&palmld_lcd_screen); + pxa_set_mci_info(&palmld_mci_platform_data); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmld_ficp_platform_data); + pxa_set_keypad_info(&palmld_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + palm27x_asoc_set_pdata(&palm27x_asoc_pdata); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMLD, "Palm LifeDrive") + .phys_io = PALMLD_PHYS_IO_START, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = palmld_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmld_init +MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c new file mode 100644 index 00000000000..9521c7b3349 --- /dev/null +++ b/arch/arm/mach-pxa/palmt5.c @@ -0,0 +1,496 @@ +/* + * Hardware definitions for Palm Tungsten|T5 + * + * Author: Marek Vasut <marek.vasut@gmail.com> + * + * Based on work of: + * Ales Snuparek <snuparek@atlas.cz> + * Justin Kendrick <twilightsentry@gmail.com> + * RichardT5 <richard_t5@users.sourceforge.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/pxa27x.h> +#include <mach/audio.h> +#include <mach/palmt5.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/irda.h> +#include <mach/pxa27x_keypad.h> +#include <mach/udc.h> +#include <mach/palmasoc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmt5_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO115_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO40_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO95_GPIO, /* usb power */ + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* MISC */ + GPIO10_GPIO, /* hotsync button */ + GPIO90_GPIO, /* power detect */ + GPIO107_GPIO, /* earphone detect */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int, + void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), + palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMT5_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMT5_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); +err: + return err; +} + +static void palmt5_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMT5_SD_READONLY); + gpio_free(GPIO_NR_PALMT5_SD_POWER); + free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data); + gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); +} + +static void palmt5_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmt5_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY); +} + +static struct pxamci_platform_data palmt5_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmt5_mci_power, + .get_ro = palmt5_mci_get_ro, + .init = palmt5_mci_init, + .exit = palmt5_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmt5_matrix_keys[] = { + KEY(0, 0, KEY_POWER), + KEY(0, 1, KEY_F1), + KEY(0, 2, KEY_ENTER), + + KEY(1, 0, KEY_F2), + KEY(1, 1, KEY_F3), + KEY(1, 2, KEY_F4), + + KEY(2, 0, KEY_UP), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_RIGHT), + KEY(3, 2, KEY_LEFT), +}; + +static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmt5_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmt5_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmt5_pxa_buttons[] = { + {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, +}; + +static struct gpio_keys_platform_data palmt5_pxa_keys_data = { + .buttons = palmt5_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmt5_pxa_buttons), +}; + +static struct platform_device palmt5_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmt5_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmt5_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMT5_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMT5_BL_POWER); +err: + return ret; +} + +static int palmt5_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness); + return brightness; +} + +static void palmt5_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_BL_POWER); + gpio_free(GPIO_NR_PALMT5_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmt5_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMT5_MAX_INTENSITY, + .dft_brightness = PALMT5_MAX_INTENSITY, + .pwm_period_ns = PALMT5_PERIOD_NS, + .init = palmt5_backlight_init, + .notify = palmt5_backlight_notify, + .exit = palmt5_backlight_exit, +}; + +static struct platform_device palmt5_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmt5_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmt5_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMT5_IR_DISABLE); +err: + return err; +} + +static void palmt5_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_IR_DISABLE); +} + +static void palmt5_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmt5_ficp_platform_data = { + .startup = palmt5_irda_startup, + .shutdown = palmt5_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmt5_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup_inverted = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT); + if (ret) + goto err2; + + return 0; +err2: + gpio_free(GPIO_NR_PALMT5_POWER_DETECT); +err1: + return ret; +} + +static int palmt5_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_POWER_DETECT); +} + +static char *palmt5_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmt5_is_ac_online, + .exit = power_supply_exit, + .supplied_to = palmt5_supplicants, + .num_supplicants = ARRAY_SIZE(palmt5_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMT5_BAT_MAX_VOLTAGE, + .min_voltage = PALMT5_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmt5_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmt5_lcd_screen = { + .modes = palmt5_lcd_modes, + .num_modes = ARRAY_SIZE(palmt5_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmt5_pxa_keys, +#endif + &palmt5_backlight, + &power_supply, +}; + +/* setup udc GPIOs initial state */ +static void __init palmt5_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); + gpio_free(GPIO_NR_PALMT5_USB_POWER); + } +} + +static void __init palmt5_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); + + set_pxa_fb_info(&palmt5_lcd_screen); + pxa_set_mci_info(&palmt5_mci_platform_data); + palmt5_udc_init(); + pxa_set_udc_info(&palmt5_udc_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmt5_ficp_platform_data); + pxa_set_keypad_info(&palmt5_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + palm27x_asoc_set_pdata(&palm27x_asoc_pdata); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMT5, "Palm Tungsten|T5") + .phys_io = PALMT5_PHYS_IO_START, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmt5_init +MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index a9d94f5dbec..b490c092461 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -32,12 +32,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/palmtx.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa27x.h> #include <mach/irda.h> #include <mach/pxa27x_keypad.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 2f730da3bba..b88eb4dd2c8 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -33,13 +33,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/palmz72.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> #include <mach/irda.h> #include <mach/pxa27x_keypad.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 36135a02fdc..6abfa2979c6 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -29,10 +29,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa2xx-regs.h> +#include <mach/pxa27x.h> #include <mach/pxa2xx_spi.h> #include <mach/pcm027.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 34841c72815..6112740b4ae 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -31,13 +31,12 @@ #include <mach/i2c.h> #include <mach/camera.h> #include <asm/mach/map.h> -#include <mach/pxa-regs.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pcm990_baseboard.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa27x.h> #include "devices.h" #include "generic.h" @@ -381,14 +380,49 @@ static struct pca953x_platform_data pca9536_data = { .gpio_base = NR_BUILTIN_GPIO + 1, }; -static struct soc_camera_link iclink[] = { - { - .bus_id = 0, /* Must match with the camera ID above */ - .gpio = NR_BUILTIN_GPIO + 1, - }, { - .bus_id = 0, /* Must match with the camera ID above */ - .gpio = -ENXIO, +static int gpio_bus_switch; + +static int pcm990_camera_set_bus_param(struct soc_camera_link *link, + unsigned long flags) +{ + if (gpio_bus_switch <= 0) { + if (flags == SOCAM_DATAWIDTH_10) + return 0; + else + return -EINVAL; + } + + if (flags & SOCAM_DATAWIDTH_8) + gpio_set_value(gpio_bus_switch, 1); + else + gpio_set_value(gpio_bus_switch, 0); + + return 0; +} + +static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) +{ + int ret; + + if (!gpio_bus_switch) { + ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera"); + if (!ret) { + gpio_bus_switch = NR_BUILTIN_GPIO + 1; + gpio_direction_output(gpio_bus_switch, 0); + } else + gpio_bus_switch = -EINVAL; } + + if (gpio_bus_switch > 0) + return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10; + else + return SOCAM_DATAWIDTH_10; +} + +static struct soc_camera_link iclink = { + .bus_id = 0, /* Must match with the camera ID above */ + .query_bus_param = pcm990_camera_query_bus_param, + .set_bus_param = pcm990_camera_set_bus_param, }; /* Board I2C devices. */ @@ -399,10 +433,10 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = { .platform_data = &pca9536_data, }, { I2C_BOARD_INFO("mt9v022", 0x48), - .platform_data = &iclink[0], /* With extender */ + .platform_data = &iclink, /* With extender */ }, { I2C_BOARD_INFO("mt9m001", 0x5d), - .platform_data = &iclink[0], /* With extender */ + .platform_data = &iclink, /* With extender */ }, }; #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 164eb0bb632..884b174c8ea 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -14,15 +14,8 @@ #include <linux/module.h> #include <linux/suspend.h> #include <linux/errno.h> -#include <linux/time.h> -#include <mach/hardware.h> -#include <asm/memory.h> -#include <asm/system.h> #include <mach/pm.h> -#include <mach/pxa-regs.h> -#include <mach/lubbock.h> -#include <asm/mach/time.h> struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; static unsigned long *sleep_save; @@ -57,9 +50,9 @@ int pxa_pm_enter(suspend_state_t state) /* if invalid, display message and wait for a hardware reset */ if (checksum != sleep_save_checksum) { -#ifdef CONFIG_ARCH_LUBBOCK - LUB_HEXLED = 0xbadbadc5; -#endif + + lubbock_set_hexled(0xbadbadc5); + while (1) pxa_cpu_pm_fns->enter(state); } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index f9093beba75..036bbde4d22 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -36,9 +36,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/i2c.h> @@ -503,12 +501,12 @@ static struct platform_device *devices[] __initdata = { static void poodle_poweroff(void) { - arm_machine_restart('h'); + arm_machine_restart('h', NULL); } -static void poodle_restart(char mode) +static void poodle_restart(char mode, const char *cmd) { - arm_machine_restart('h'); + arm_machine_restart('h', cmd); } static void __init poodle_init(void) diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c index 3ca7ffc6904..fcdd374437a 100644 --- a/arch/arm/mach-pxa/pwm.c +++ b/arch/arm/mach-pxa/pwm.c @@ -20,7 +20,6 @@ #include <linux/pwm.h> #include <asm/div64.h> -#include <mach/pxa-regs.h> /* PWM registers and bits definitions */ #define PWMCR (0x00) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 6c57522e246..77c2693cfee 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,9 +25,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/gpio.h> +#include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/pm.h> #include <mach/dma.h> @@ -310,14 +309,14 @@ set_pwer: void __init pxa25x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(85, pxa25x_set_wake); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake); } #ifdef CONFIG_CPU_PXA26x void __init pxa26x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(90, pxa25x_set_wake); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake); } #endif @@ -355,7 +354,7 @@ static int __init pxa25x_init(void) clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs)); - if ((ret = pxa_init_dma(16))) + if ((ret = pxa_init_dma(IRQ_DMA, 16))) return ret; pxa25x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 411bec54fdc..a425ec71e65 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -21,9 +21,8 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <mach/irqs.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/gpio.h> +#include <mach/pxa27x.h> #include <mach/reset.h> #include <mach/ohci.h> #include <mach/pm.h> @@ -332,7 +331,7 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on) void __init pxa27x_init_irq(void) { pxa_init_irq(34, pxa27x_set_wake); - pxa_init_gpio(121, pxa27x_set_wake); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake); } /* @@ -381,7 +380,7 @@ static int __init pxa27x_init(void) clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs)); - if ((ret = pxa_init_dma(32))) + if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; pxa27x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 73d04d81c75..2f3394f8591 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -16,7 +16,6 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa2xx.h> #include <mach/mfp-pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 83fb609b6eb..4ba6d21f851 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -17,15 +17,13 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include "generic.h" #include "devices.h" #include "clock.h" -static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = { MFP_ADDR_X(GPIO0, GPIO2, 0x00b4), MFP_ADDR_X(GPIO3, GPIO26, 0x027c), @@ -74,7 +72,7 @@ static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { }; /* override pxa300 MFP register addresses */ -static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = { MFP_ADDR_X(GPIO30, GPIO98, 0x0418), MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C), @@ -100,13 +98,13 @@ static struct clk_lookup pxa310_clkregs[] = { static int __init pxa300_init(void) { if (cpu_is_pxa300() || cpu_is_pxa310()) { - pxa3xx_init_mfp(); - pxa3xx_mfp_init_addr(pxa300_mfp_addr_map); + mfp_init_base(io_p2v(MFPR_BASE)); + mfp_init_addr(pxa300_mfp_addr_map); clks_register(ARRAY_AND_SIZE(common_clkregs)); } if (cpu_is_pxa310()) { - pxa3xx_mfp_init_addr(pxa310_mfp_addr_map); + mfp_init_addr(pxa310_mfp_addr_map); clks_register(ARRAY_AND_SIZE(pxa310_clkregs)); } diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 36f066196fa..8b3d97efada 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -17,16 +17,13 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <mach/hardware.h> -#include <mach/mfp.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa320.h> +#include <mach/pxa320.h> #include "generic.h" #include "devices.h" #include "clock.h" -static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = { MFP_ADDR_X(GPIO0, GPIO4, 0x0124), MFP_ADDR_X(GPIO5, GPIO9, 0x028C), @@ -89,8 +86,8 @@ static struct clk_lookup pxa320_clkregs[] = { static int __init pxa320_init(void) { if (cpu_is_pxa320()) { - pxa3xx_init_mfp(); - pxa3xx_mfp_init_addr(pxa320_mfp_addr_map); + mfp_init_base(io_p2v(MFPR_BASE)); + mfp_init_addr(pxa320_mfp_addr_map); clks_register(ARRAY_AND_SIZE(pxa320_clkregs)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 490893824e7..b02d4544dc9 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -23,6 +23,7 @@ #include <linux/sysdev.h> #include <mach/hardware.h> +#include <mach/gpio.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -538,7 +539,7 @@ void __init pxa3xx_init_irq(void) __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); pxa_init_irq(56, pxa3xx_set_wake); - pxa_init_gpio(128, NULL); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } /* @@ -594,7 +595,7 @@ static int __init pxa3xx_init(void) clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs)); - if ((ret = pxa_init_dma(32))) + if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; pxa3xx_init_pm(); diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index 13e6bfdfff6..71131742fff 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -16,10 +16,9 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/mfp-pxa930.h> +#include <mach/pxa930.h> -static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = { MFP_ADDR(GPIO0, 0x02e0), MFP_ADDR(GPIO1, 0x02dc), @@ -180,8 +179,8 @@ static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = { static int __init pxa930_init(void) { if (cpu_is_pxa930()) { - pxa3xx_init_mfp(); - pxa3xx_mfp_init_addr(pxa930_mfp_addr_map); + mfp_init_base(io_p2v(MFPR_BASE)); + mfp_init_addr(pxa930_mfp_addr_map); } return 0; diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 00b2dc2a107..df29d45fb4e 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -10,7 +10,7 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ost.h> #include <mach/reset.h> unsigned int reset_status; @@ -81,7 +81,7 @@ static void do_hw_reset(void) OSMR3 = OSCR + 368640; /* ... in 100 ms */ } -void arch_reset(char mode) +void arch_reset(char mode, const char *cmd) { clear_reset_status(RESET_STATUS_ALL); diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 5d02a732558..ff823999143 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -25,11 +25,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa930.h> + +#include <mach/pxa930.h> #include <mach/i2c.h> -#include <mach/regs-lcd.h> #include <mach/pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index f0845c1b001..16b4ec67e3b 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -25,7 +25,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <mach/pm.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-gpio.h> #include <mach/sharpsl.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index a62c8375eb5..2ed95f369cf 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -15,7 +15,6 @@ #include <asm/assembler.h> #include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #define MDREFR_KDIV 0x200a4000 // all banks diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6d447c9ce8a..8c61ddac119 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -44,9 +44,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/reset.h> #include <mach/i2c.h> @@ -105,6 +103,12 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO57_nIOIS16, GPIO104_PSKTSEL, + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + /* MMC */ GPIO32_MMC_CLK, GPIO112_MMC_CMD, @@ -703,10 +707,10 @@ static struct platform_device *devices[] __initdata = { static void spitz_poweroff(void) { - arm_machine_restart('g'); + arm_machine_restart('g', NULL); } -static void spitz_restart(char mode) +static void spitz_restart(char mode, const char *cmd) { /* Bootloader magic for a reboot */ if((MSC0 & 0xffff0000) == 0x7ff00000) diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 072e77cfe5a..2e4490562c9 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -24,7 +24,6 @@ #include <mach/sharpsl.h> #include <mach/spitz.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #include <mach/pxa2xx-gpio.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 6f42004db3e..965e38c6baf 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -33,7 +33,6 @@ #include <asm/irq.h> #include <mach/hardware.h> #include <mach/ssp.h> -#include <mach/pxa-regs.h> #include <mach/regs-ssp.h> #define TIMEOUT 100000 diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index f3821cfda72..29f5f5c180b 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -13,7 +13,6 @@ #include <asm/assembler.h> #include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> .text diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 58ef08a5224..b75353a2ec7 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -22,9 +22,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa930.h> + +#include <mach/pxa930.h> #include <mach/pxafb.h> #include <mach/pxa27x_keypad.h> diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 95656a72268..8eb3830fbb0 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -22,8 +22,7 @@ #include <asm/div64.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ost.h> /* * This is PXA's sched_clock implementation. This has a resolution diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 3332e5d0356..6e8ade6ae33 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -36,8 +36,8 @@ #include <asm/setup.h> #include <asm/mach-types.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> + +#include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> #include <mach/i2c.h> @@ -876,10 +876,10 @@ static struct platform_device *devices[] __initdata = { static void tosa_poweroff(void) { - arm_machine_restart('g'); + arm_machine_restart('g', NULL); } -static void tosa_restart(char mode) +static void tosa_restart(char mode, const char *cmd) { /* Bootloader magic for a reboot */ if((MSC0 & 0xffff0000) == 0x7ff00000) @@ -919,7 +919,7 @@ static void __init tosa_init(void) pxa2xx_set_spi_info(2, &pxa_ssp_master_info); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL); + clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index a72e3add743..f79c9cb70ae 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -39,10 +39,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/pxa2xx_spi.h> #include <mach/trizeps4.h> #include <mach/audio.h> diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 4b3120dbc04..0e65344e9f5 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -42,12 +42,9 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/bitfield.h> +#include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa25x.h> #include <mach/i2c.h> #include <mach/viper.h> @@ -956,7 +953,7 @@ static struct map_desc viper_io_desc[] __initdata = { }, { .virtual = VIPER_PC104IO_BASE, - .pfn = __phys_to_pfn(_PCMCIA1IO), + .pfn = __phys_to_pfn(0x30000000), .length = 0x00800000, .type = MT_DEVICE, }, diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 46538885a58..c1f73205d07 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -18,9 +18,9 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/gpio.h> -#include <asm/gpio.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include <mach/i2c.h> #include <mach/zylonite.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 28e4e623780..4e1c488c690 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/gpio.h> -#include <mach/mfp-pxa320.h> +#include <mach/pxa320.h> #include <mach/zylonite.h> #include "generic.h" diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index ad911854eb4..b6ec1062777 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -35,6 +35,7 @@ config MACH_REALVIEW_PB11MP bool "Support RealView/PB11MPCore platform" select CPU_V6 select ARM_GIC + select HAVE_PATA_PLATFORM help Include support for the ARM(R) RealView MPCore Platform Baseboard. PB11MPCore is a platform with an on-board ARM11MPCore and has @@ -51,6 +52,7 @@ config MACH_REALVIEW_PBA8 bool "Support RealView/PB-A8 platform" select CPU_V7 select ARM_GIC + select HAVE_PATA_PLATFORM help Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard. PB-A8 is a platform with an on-board Cortex-A8 and has support for diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index bd2aa4f1614..d6766685cfc 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -29,6 +29,7 @@ #include <linux/clockchips.h> #include <linux/io.h> #include <linux/smc911x.h> +#include <linux/ata_platform.h> #include <asm/clkdev.h> #include <asm/system.h> @@ -150,6 +151,44 @@ int realview_eth_register(const char *name, struct resource *res) return platform_device_register(&realview_eth_device); } +struct platform_device realview_usb_device = { + .name = "isp1760", + .num_resources = 2, +}; + +int realview_usb_register(struct resource *res) +{ + realview_usb_device.resource = res; + return platform_device_register(&realview_usb_device); +} + +static struct pata_platform_info pata_platform_data = { + .ioport_shift = 1, +}; + +static struct resource pata_resources[] = { + [0] = { + .start = REALVIEW_CF_BASE, + .end = REALVIEW_CF_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_CF_BASE + 0x100, + .end = REALVIEW_CF_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device realview_cf_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(pata_resources), + .resource = pata_resources, + .dev = { + .platform_data = &pata_platform_data, + }, +}; + static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, @@ -158,11 +197,25 @@ static struct resource realview_i2c_resource = { struct platform_device realview_i2c_device = { .name = "versatile-i2c", - .id = -1, + .id = 0, .num_resources = 1, .resource = &realview_i2c_resource, }; +static struct i2c_board_info realview_i2c_board_info[] = { + { + I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), + .type = "ds1338", + }, +}; + +static int __init realview_i2c_init(void) +{ + return i2c_register_board_info(0, realview_i2c_board_info, + ARRAY_SIZE(realview_i2c_board_info)); +} +arch_initcall(realview_i2c_init); + #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) static unsigned int realview_mmc_status(struct device *dev) diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 44269b162d4..21c08637683 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -45,6 +45,7 @@ static struct amba_device name##_device = { \ } extern struct platform_device realview_flash_device; +extern struct platform_device realview_cf_device; extern struct platform_device realview_i2c_device; extern struct mmc_platform_data realview_mmc0_plat_data; extern struct mmc_platform_data realview_mmc1_plat_data; @@ -62,5 +63,6 @@ extern void realview_leds_event(led_event_t ledevt); extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); +extern int realview_usb_register(struct resource *res); #endif diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h index c8bed8f58ba..307f97b16e5 100644 --- a/arch/arm/mach-realview/include/mach/board-pba8.h +++ b/arch/arm/mach-realview/include/mach/board-pba8.h @@ -45,8 +45,6 @@ #define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */ #define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */ #define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */ -#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ #define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ #define REALVIEW_PBA8_FLASH0_BASE 0x40000000 #define REALVIEW_PBA8_FLASH0_SIZE SZ_64M diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 793a3a33271..c8f50835fed 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -204,6 +204,12 @@ #define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ /* + * CompactFlash + */ +#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */ +#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */ + +/* * Disk on Chip */ #define REALVIEW_DOC_BASE 0x2C000000 diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index a2f61c78adb..1a15a441e02 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -34,7 +34,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; unsigned int val; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index bed39ed9761..c20fbef122b 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -264,6 +264,19 @@ static int eth_device_register(void) return realview_eth_register(name, realview_eb_eth_resources); } +static struct resource realview_eb_isp1761_resources[] = { + [0] = { + .start = REALVIEW_EB_USB_BASE, + .end = REALVIEW_EB_USB_BASE + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EB_USB, + .end = IRQ_EB_USB, + .flags = IORESOURCE_IRQ, + }, +}; + static void __init gic_init_irq(void) { if (core_tile_eb11mp() || core_tile_a9mp()) { @@ -323,6 +336,8 @@ static void realview_eb11mp_fixup(void) /* platform devices */ realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH; realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH; + realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB; + realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB; } static void __init realview_eb_timer_init(void) @@ -366,6 +381,7 @@ static void __init realview_eb_init(void) realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); eth_device_register(); + realview_usb_register(realview_eb_isp1761_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 8f0683c2214..a64b84a7a3d 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -222,6 +222,19 @@ static struct resource realview_pb1176_smsc911x_resources[] = { }, }; +static struct resource realview_pb1176_isp1761_resources[] = { + [0] = { + .start = REALVIEW_PB1176_USB_BASE, + .end = REALVIEW_PB1176_USB_BASE + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PB1176_USB, + .end = IRQ_PB1176_USB, + .flags = IORESOURCE_IRQ, + }, +}; + static void __init gic_init_irq(void) { /* ARM1176 DevChip GIC, primary */ @@ -260,6 +273,8 @@ static void __init realview_pb1176_init(void) realview_flash_register(&realview_pb1176_flash_resource, 1); realview_eth_register(NULL, realview_pb1176_smsc911x_resources); + platform_device_register(&realview_i2c_device); + realview_usb_register(realview_pb1176_isp1761_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 3ebdb2dadd6..ea1e60eca35 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -230,31 +230,19 @@ static struct resource realview_pb11mp_smsc911x_resources[] = { }, }; -struct resource realview_pb11mp_cf_resources[] = { +static struct resource realview_pb11mp_isp1761_resources[] = { [0] = { - .start = REALVIEW_PB11MP_CF_BASE, - .end = REALVIEW_PB11MP_CF_BASE + SZ_4K - 1, + .start = REALVIEW_PB11MP_USB_BASE, + .end = REALVIEW_PB11MP_USB_BASE + SZ_128K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = REALVIEW_PB11MP_CF_MEM_BASE, - .end = REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = -1, /* FIXME: Find correct irq */ - .end = -1, + .start = IRQ_TC11MP_USB, + .end = IRQ_TC11MP_USB, .flags = IORESOURCE_IRQ, }, }; -struct platform_device realview_pb11mp_cf_device = { - .name = "compactflash", - .id = 0, - .num_resources = ARRAY_SIZE(realview_pb11mp_cf_resources), - .resource = realview_pb11mp_cf_resources, -}; - static void __init gic_init_irq(void) { unsigned int pldctrl; @@ -308,7 +296,8 @@ static void __init realview_pb11mp_init(void) ARRAY_SIZE(realview_pb11mp_flash_resource)); realview_eth_register(NULL, realview_pb11mp_smsc911x_resources); platform_device_register(&realview_i2c_device); - platform_device_register(&realview_pb11mp_cf_device); + platform_device_register(&realview_cf_device); + realview_usb_register(realview_pb11mp_isp1761_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 34c94435d2d..d6ac1eb8657 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -221,31 +221,19 @@ static struct resource realview_pba8_smsc911x_resources[] = { }, }; -struct resource realview_pba8_cf_resources[] = { +static struct resource realview_pba8_isp1761_resources[] = { [0] = { - .start = REALVIEW_PBA8_CF_BASE, - .end = REALVIEW_PBA8_CF_BASE + SZ_4K - 1, + .start = REALVIEW_PBA8_USB_BASE, + .end = REALVIEW_PBA8_USB_BASE + SZ_128K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = REALVIEW_PBA8_CF_MEM_BASE, - .end = REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = -1, /* FIXME: Find correct irq */ - .end = -1, + .start = IRQ_PBA8_USB, + .end = IRQ_PBA8_USB, .flags = IORESOURCE_IRQ, }, }; -struct platform_device realview_pba8_cf_device = { - .name = "compactflash", - .id = 0, - .num_resources = ARRAY_SIZE(realview_pba8_cf_resources), - .resource = realview_pba8_cf_resources, -}; - static void __init gic_init_irq(void) { /* ARM PB-A8 on-board GIC */ @@ -276,7 +264,8 @@ static void __init realview_pba8_init(void) ARRAY_SIZE(realview_pba8_flash_resource)); realview_eth_register(NULL, realview_pba8_smsc911x_resources); platform_device_register(&realview_i2c_device); - platform_device_register(&realview_pba8_cf_device); + platform_device_register(&realview_cf_device); + realview_usb_register(realview_pba8_isp1761_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 7958a30f893..c47d974d52b 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -26,6 +26,16 @@ #include <asm/mach/dma.h> #include <asm/hardware/iomd.h> +struct iomd_dma { + struct dma_struct dma; + unsigned int state; + unsigned long base; /* Controller base address */ + int irq; /* Controller IRQ */ + struct scatterlist cur_sg; /* Current controller buffer */ + dma_addr_t dma_addr; + unsigned int dma_len; +}; + #if 0 typedef enum { dma_size_8 = 1, @@ -44,15 +54,15 @@ typedef enum { #define CR (IOMD_IO0CR - IOMD_IO0CURA) #define ST (IOMD_IO0ST - IOMD_IO0CURA) -static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma) +static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma) { unsigned long end, offset, flags = 0; - if (dma->sg) { - sg->dma_address = dma->sg->dma_address; + if (idma->dma.sg) { + sg->dma_address = idma->dma_addr; offset = sg->dma_address & ~PAGE_MASK; - end = offset + dma->sg->length; + end = offset + idma->dma_len; if (end > PAGE_SIZE) end = PAGE_SIZE; @@ -62,15 +72,17 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma) sg->length = end - TRANSFER_SIZE; - dma->sg->length -= end - offset; - dma->sg->dma_address += end - offset; + idma->dma_len -= end - offset; + idma->dma_addr += end - offset; - if (dma->sg->length == 0) { - if (dma->sgcount > 1) { - dma->sg++; - dma->sgcount--; + if (idma->dma_len == 0) { + if (idma->dma.sgcount > 1) { + idma->dma.sg = sg_next(idma->dma.sg); + idma->dma_addr = idma->dma.sg->dma_address; + idma->dma_len = idma->dma.sg->length; + idma->dma.sgcount--; } else { - dma->sg = NULL; + idma->dma.sg = NULL; flags |= DMA_END_S; } } @@ -85,8 +97,8 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma) static irqreturn_t iomd_dma_handle(int irq, void *dev_id) { - dma_t *dma = (dma_t *)dev_id; - unsigned long base = dma->dma_base; + struct iomd_dma *idma = dev_id; + unsigned long base = idma->base; do { unsigned int status; @@ -95,93 +107,99 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) if (!(status & DMA_ST_INT)) return IRQ_HANDLED; - if ((dma->state ^ status) & DMA_ST_AB) - iomd_get_next_sg(&dma->cur_sg, dma); + if ((idma->state ^ status) & DMA_ST_AB) + iomd_get_next_sg(&idma->cur_sg, idma); switch (status & (DMA_ST_OFL | DMA_ST_AB)) { case DMA_ST_OFL: /* OIA */ case DMA_ST_AB: /* .IB */ - iomd_writel(dma->cur_sg.dma_address, base + CURA); - iomd_writel(dma->cur_sg.length, base + ENDA); - dma->state = DMA_ST_AB; + iomd_writel(idma->cur_sg.dma_address, base + CURA); + iomd_writel(idma->cur_sg.length, base + ENDA); + idma->state = DMA_ST_AB; break; case DMA_ST_OFL | DMA_ST_AB: /* OIB */ case 0: /* .IA */ - iomd_writel(dma->cur_sg.dma_address, base + CURB); - iomd_writel(dma->cur_sg.length, base + ENDB); - dma->state = 0; + iomd_writel(idma->cur_sg.dma_address, base + CURB); + iomd_writel(idma->cur_sg.length, base + ENDB); + idma->state = 0; break; } if (status & DMA_ST_OFL && - dma->cur_sg.length == (DMA_END_S|DMA_END_L)) + idma->cur_sg.length == (DMA_END_S|DMA_END_L)) break; } while (1); - dma->state = ~DMA_ST_AB; + idma->state = ~DMA_ST_AB; disable_irq(irq); return IRQ_HANDLED; } -static int iomd_request_dma(dmach_t channel, dma_t *dma) +static int iomd_request_dma(unsigned int chan, dma_t *dma) { - return request_irq(dma->dma_irq, iomd_dma_handle, - IRQF_DISABLED, dma->device_id, dma); + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + + return request_irq(idma->irq, iomd_dma_handle, + IRQF_DISABLED, idma->dma.device_id, idma); } -static void iomd_free_dma(dmach_t channel, dma_t *dma) +static void iomd_free_dma(unsigned int chan, dma_t *dma) { - free_irq(dma->dma_irq, dma); + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + + free_irq(idma->irq, idma); } -static void iomd_enable_dma(dmach_t channel, dma_t *dma) +static void iomd_enable_dma(unsigned int chan, dma_t *dma) { - unsigned long dma_base = dma->dma_base; + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + unsigned long dma_base = idma->base; unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E; - if (dma->invalid) { - dma->invalid = 0; + if (idma->dma.invalid) { + idma->dma.invalid = 0; /* * Cope with ISA-style drivers which expect cache * coherence. */ - if (!dma->sg) { - dma->sg = &dma->buf; - dma->sgcount = 1; - dma->buf.length = dma->count; - dma->buf.dma_address = dma_map_single(NULL, - dma->addr, dma->count, - dma->dma_mode == DMA_MODE_READ ? + if (!idma->dma.sg) { + idma->dma.sg = &idma->dma.buf; + idma->dma.sgcount = 1; + idma->dma.buf.length = idma->dma.count; + idma->dma.buf.dma_address = dma_map_single(NULL, + idma->dma.addr, idma->dma.count, + idma->dma.dma_mode == DMA_MODE_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE); } iomd_writeb(DMA_CR_C, dma_base + CR); - dma->state = DMA_ST_AB; + idma->state = DMA_ST_AB; } - - if (dma->dma_mode == DMA_MODE_READ) + + if (idma->dma.dma_mode == DMA_MODE_READ) ctrl |= DMA_CR_D; iomd_writeb(ctrl, dma_base + CR); - enable_irq(dma->dma_irq); + enable_irq(idma->irq); } -static void iomd_disable_dma(dmach_t channel, dma_t *dma) +static void iomd_disable_dma(unsigned int chan, dma_t *dma) { - unsigned long dma_base = dma->dma_base; + struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); + unsigned long dma_base = idma->base; unsigned long flags; local_irq_save(flags); - if (dma->state != ~DMA_ST_AB) - disable_irq(dma->dma_irq); + if (idma->state != ~DMA_ST_AB) + disable_irq(idma->irq); iomd_writeb(0, dma_base + CR); local_irq_restore(flags); } -static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle) +static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle) { int tcr, speed; @@ -197,7 +215,7 @@ static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle) tcr = iomd_readb(IOMD_DMATCR); speed &= 3; - switch (channel) { + switch (chan) { case DMA_0: tcr = (tcr & ~0x03) | speed; break; @@ -236,16 +254,22 @@ static struct fiq_handler fh = { .name = "floppydma" }; -static void floppy_enable_dma(dmach_t channel, dma_t *dma) +struct floppy_dma { + struct dma_struct dma; + unsigned int fiq; +}; + +static void floppy_enable_dma(unsigned int chan, dma_t *dma) { + struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma); void *fiqhandler_start; unsigned int fiqhandler_length; struct pt_regs regs; - if (dma->sg) + if (fdma->dma.sg) BUG(); - if (dma->dma_mode == DMA_MODE_READ) { + if (fdma->dma.dma_mode == DMA_MODE_READ) { extern unsigned char floppy_fiqin_start, floppy_fiqin_end; fiqhandler_start = &floppy_fiqin_start; fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start; @@ -255,8 +279,8 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma) fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start; } - regs.ARM_r9 = dma->count; - regs.ARM_r10 = (unsigned long)dma->addr; + regs.ARM_r9 = fdma->dma.count; + regs.ARM_r10 = (unsigned long)fdma->dma.addr; regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE; if (claim_fiq(&fh)) { @@ -266,16 +290,17 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma) set_fiq_handler(fiqhandler_start, fiqhandler_length); set_fiq_regs(®s); - enable_fiq(dma->dma_irq); + enable_fiq(fdma->fiq); } -static void floppy_disable_dma(dmach_t channel, dma_t *dma) +static void floppy_disable_dma(unsigned int chan, dma_t *dma) { - disable_fiq(dma->dma_irq); + struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma); + disable_fiq(fdma->fiq); release_fiq(&fh); } -static int floppy_get_residue(dmach_t channel, dma_t *dma) +static int floppy_get_residue(unsigned int chan, dma_t *dma) { struct pt_regs regs; get_fiq_regs(®s); @@ -292,7 +317,7 @@ static struct dma_ops floppy_dma_ops = { /* * This is virtual DMA - we don't need anything here. */ -static void sound_enable_disable_dma(dmach_t channel, dma_t *dma) +static void sound_enable_disable_dma(unsigned int chan, dma_t *dma) { } @@ -302,8 +327,24 @@ static struct dma_ops sound_dma_ops = { .disable = sound_enable_disable_dma, }; -void __init arch_dma_init(dma_t *dma) +static struct iomd_dma iomd_dma[6]; + +static struct floppy_dma floppy_dma = { + .dma = { + .d_ops = &floppy_dma_ops, + }, + .fiq = FIQ_FLOPPYDATA, +}; + +static dma_t sound_dma = { + .d_ops = &sound_dma_ops, +}; + +static int __init rpc_dma_init(void) { + unsigned int i; + int ret; + iomd_writeb(0, IOMD_IO0CR); iomd_writeb(0, IOMD_IO1CR); iomd_writeb(0, IOMD_IO2CR); @@ -311,31 +352,39 @@ void __init arch_dma_init(dma_t *dma) iomd_writeb(0xa0, IOMD_DMATCR); - dma[DMA_0].dma_base = IOMD_IO0CURA; - dma[DMA_0].dma_irq = IRQ_DMA0; - dma[DMA_0].d_ops = &iomd_dma_ops; - dma[DMA_1].dma_base = IOMD_IO1CURA; - dma[DMA_1].dma_irq = IRQ_DMA1; - dma[DMA_1].d_ops = &iomd_dma_ops; - dma[DMA_2].dma_base = IOMD_IO2CURA; - dma[DMA_2].dma_irq = IRQ_DMA2; - dma[DMA_2].d_ops = &iomd_dma_ops; - dma[DMA_3].dma_base = IOMD_IO3CURA; - dma[DMA_3].dma_irq = IRQ_DMA3; - dma[DMA_3].d_ops = &iomd_dma_ops; - dma[DMA_S0].dma_base = IOMD_SD0CURA; - dma[DMA_S0].dma_irq = IRQ_DMAS0; - dma[DMA_S0].d_ops = &iomd_dma_ops; - dma[DMA_S1].dma_base = IOMD_SD1CURA; - dma[DMA_S1].dma_irq = IRQ_DMAS1; - dma[DMA_S1].d_ops = &iomd_dma_ops; - dma[DMA_VIRTUAL_FLOPPY].dma_irq = FIQ_FLOPPYDATA; - dma[DMA_VIRTUAL_FLOPPY].d_ops = &floppy_dma_ops; - dma[DMA_VIRTUAL_SOUND].d_ops = &sound_dma_ops; - /* * Setup DMA channels 2,3 to be for podules * and channels 0,1 for internal devices */ iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT); + + iomd_dma[DMA_0].base = IOMD_IO0CURA; + iomd_dma[DMA_0].irq = IRQ_DMA0; + iomd_dma[DMA_1].base = IOMD_IO1CURA; + iomd_dma[DMA_1].irq = IRQ_DMA1; + iomd_dma[DMA_2].base = IOMD_IO2CURA; + iomd_dma[DMA_2].irq = IRQ_DMA2; + iomd_dma[DMA_3].base = IOMD_IO3CURA; + iomd_dma[DMA_3].irq = IRQ_DMA3; + iomd_dma[DMA_S0].base = IOMD_SD0CURA; + iomd_dma[DMA_S0].irq = IRQ_DMAS0; + iomd_dma[DMA_S1].base = IOMD_SD1CURA; + iomd_dma[DMA_S1].irq = IRQ_DMAS1; + + for (i = DMA_0; i <= DMA_S1; i++) { + iomd_dma[i].dma.d_ops = &iomd_dma_ops; + + ret = isa_dma_add(i, &iomd_dma[i].dma); + if (ret) + printk("IOMDDMA%u: unable to register: %d\n", i, ret); + } + + ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma); + if (ret) + printk("IOMDFLOPPY: unable to register: %d\n", ret); + ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma); + if (ret) + printk("IOMDSOUND: unable to register: %d\n", ret); + return 0; } +core_initcall(rpc_dma_init); diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h index bad72054858..67bfc6719c3 100644 --- a/arch/arm/mach-rpc/include/mach/isa-dma.h +++ b/arch/arm/mach-rpc/include/mach/isa-dma.h @@ -23,5 +23,7 @@ #define DMA_FLOPPY DMA_VIRTUAL_FLOPPY +#define IOMD_DMA_BOUNDARY (PAGE_SIZE - 1) + #endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h index bd7268ba17e..45c7b935dc4 100644 --- a/arch/arm/mach-rpc/include/mach/system.h +++ b/arch/arm/mach-rpc/include/mach/system.h @@ -16,7 +16,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { iomd_writeb(0, IOMD_ROMCR0); diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 552b4c778fd..440c014e24b 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -28,7 +28,7 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h new file mode 100644 index 00000000000..ce1ec69806a --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -0,0 +1,23 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - GPIO bank numbering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) + +#define S3C2410_GPIO_BANKA (32*0) +#define S3C2410_GPIO_BANKB (32*1) +#define S3C2410_GPIO_BANKC (32*2) +#define S3C2410_GPIO_BANKD (32*3) +#define S3C2410_GPIO_BANKE (32*4) +#define S3C2410_GPIO_BANKF (32*5) +#define S3C2410_GPIO_BANKG (32*6) +#define S3C2410_GPIO_BANKH (32*7) diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index 00476a573bb..51a88cf9526 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -23,3 +23,6 @@ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #include <asm-generic/gpio.h> +#include <mach/gpio-nrs.h> + +#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 49efce8cd4a..2a2384ffa7b 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -80,7 +80,7 @@ #define IRQ_EINT22 S3C2410_IRQ(50) #define IRQ_EINT23 S3C2410_IRQ(51) - +#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) #define IRQ_LCD_FIFO S3C2410_IRQ(52) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 32107761306..35a03df473f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -14,16 +14,7 @@ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) - -#define S3C2410_GPIO_BANKA (32*0) -#define S3C2410_GPIO_BANKB (32*1) -#define S3C2410_GPIO_BANKC (32*2) -#define S3C2410_GPIO_BANKD (32*3) -#define S3C2410_GPIO_BANKE (32*4) -#define S3C2410_GPIO_BANKF (32*5) -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) +#include <mach/gpio-nrs.h> #ifdef CONFIG_CPU_S3C2400 #define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h index 7613d0a384b..b8687f71c30 100644 --- a/arch/arm/mach-s3c2410/include/mach/system-reset.h +++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h @@ -22,7 +22,7 @@ extern void (*s3c24xx_reset_hook)(void); static void -arch_reset(char mode) +arch_reset(char mode, const char *cmd) { struct clk *wdtclk; diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 821a1668c3a..7a7c4da4c25 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -203,7 +203,7 @@ static void __init h1940_map_io(void) #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif - s3c2410_pm_init(); + s3c_pm_init(); } static void __init h1940_init_irq(void) diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 9678a53ceeb..9f1ba9b63f7 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -355,7 +355,7 @@ static void __init qt2410_machine_init(void) s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); - s3c2410_pm_init(); + s3c_pm_init(); } MACHINE_START(QT2410, "QT2410") diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index a6970f61319..87fc481d92d 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -37,21 +37,14 @@ #include <plat/cpu.h> #include <plat/pm.h> -#ifdef CONFIG_S3C2410_PM_DEBUG -extern void pm_dbg(const char *fmt, ...); -#define DBG(fmt...) pm_dbg(fmt) -#else -#define DBG(fmt...) printk(KERN_DEBUG fmt) -#endif - static void s3c2410_pm_prepare(void) { /* ensure at least GSTATUS3 has the resume address */ - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3); - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); + S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); if (machine_is_h1940()) { void *base = phys_to_virt(H1940_SUSPEND_CHECK); diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 6078f09b7df..8331e8d97e2 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -29,13 +29,14 @@ #include <mach/bast-map.h> #include <mach/bast-irq.h> -#include <mach/usb-control.h> #include <mach/regs-gpio.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <plat/usb-control.h> #include <plat/devs.h> + #include "usb-simtec.h" /* control power and monitor over-current events on various Simtec diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 919856c9433..9e3478506c6 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -29,8 +29,8 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-s3c2412-iis.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-s3c2412-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index ecddbbb3483..72c266aee14 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -494,7 +494,7 @@ static int jive_pm_suspend(struct sys_device *sd, pm_message_t state) * correct address to resume from. */ __raw_writel(0x2BED, S3C2412_INFORM0); - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1); + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); return 0; } @@ -630,7 +630,7 @@ static void __init jive_machine_init(void) /* initialise the power management now we've setup everything. */ - s3c2410_pm_init(); + s3c_pm_init(); s3c_device_nand.dev.platform_data = &jive_nand_info; diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 217e9e4ed45..c9cfe40e21f 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[] = { static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) { - s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); return 0; } @@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_device *dev) tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; __raw_writel(tmp, S3C2412_PWRCFG); - s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); return 0; } diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 5b5ee0b8f4e..69b6cf34df4 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -28,7 +28,7 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 12d378f84ad..bc8d8d1ebd1 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -203,7 +203,7 @@ static void __init rx3715_init_machine(void) #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif - s3c2410_pm_init(); + s3c_pm_init(); s3c24xx_fb_set_platdata(&rx3715_fb_info); platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 2a58a4d5aa5..8430e582918 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -29,7 +29,7 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { \ diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h index ae8c0e35978..83ce2a7a9da 100644 --- a/arch/arm/mach-s3c24a0/include/mach/irqs.h +++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h @@ -70,6 +70,8 @@ #define IRQ_EINT17 S3C2410_IRQ(49) #define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00) + /* SUB IRQS */ #define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ #define IRQ_S3CUART_TX0 S3C2410_IRQ(52) diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index cff27d813fc..baf1c0f1ea5 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -52,6 +52,9 @@ #define S3C64XX_PA_VIC0 (0x71200000) #define S3C64XX_PA_VIC1 (0x71300000) +#define S3C64XX_PA_MODEM (0x74108000) +#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000) + /* place VICs close together */ #define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) #define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h index 652bbc403f0..090cfd969bc 100644 --- a/arch/arm/mach-s3c6400/include/mach/system.h +++ b/arch/arm/mach-s3c6400/include/mach/system.h @@ -16,7 +16,7 @@ static void arch_idle(void) /* nothing here yet */ } -static void arch_reset(char mode) +static void arch_reset(char mode, const char *cmd) { /* nothing here yet */ } diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index f99d9013905..81ffff7ed49 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -71,19 +71,9 @@ config SA1100_H3600 <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600> <http://www.compaq.com/products/handhelds/pocketpc/> -config SA1100_H3800 - bool "Compaq iPAQ H3800" - help - Say Y here if you intend to run this kernel on the Compaq iPAQ H3800 - series handheld computer. Information about this machine and the - Linux port to this machine can be found at: - - <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800> - <http://www.compaq.com/products/handhelds/pocketpc/> - config SA1100_H3XXX bool - depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800 + depends on SA1100_H3100 || SA1100_H3600 default y config SA1100_BADGE4 @@ -157,15 +147,6 @@ config SA1100_SSP This isn't for audio support, but for attached sensors and other devices, eg for BadgePAD 4 sensor support. -config H3600_SLEEVE - tristate "Compaq iPAQ Handheld sleeve support" - depends on SA1100_H3100 || SA1100_H3600 - help - Choose this option to enable support for extension packs (sleeves) - for the Compaq iPAQ H3XXX series of handheld computers. This option - is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension - packs. - endmenu endif diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 2052eb88c96..bbf2ebcc306 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -25,6 +25,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/timer.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -145,7 +146,8 @@ static struct locomo_driver collie_uart_driver = { .remove = collie_uart_remove, }; -static int __init collie_uart_init(void) { +static int __init collie_uart_init(void) +{ return locomo_driver_register(&collie_uart_driver); } device_initcall(collie_uart_init); @@ -195,18 +197,34 @@ static struct mtd_partition collie_partitions[] = { } }; +static int collie_flash_init(void) +{ + int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable"); + if (rc) + return rc; + + rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1); + if (rc) + gpio_free(COLLIE_GPIO_VPEN); + + return rc; +} + static void collie_set_vpp(int vpp) { - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN); - if (vpp) - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN); - else - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN); + gpio_set_value(COLLIE_GPIO_VPEN, vpp); +} + +static void collie_flash_exit(void) +{ + gpio_free(COLLIE_GPIO_VPEN); } static struct flash_platform_data collie_flash_data = { .map_name = "cfi_probe", + .init = collie_flash_init, .set_vpp = collie_set_vpp, + .exit = collie_flash_exit, .parts = collie_partitions, .nr_parts = ARRAY_SIZE(collie_partitions), }; diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c index b39307f26b5..444f266ecc0 100644 --- a/arch/arm/mach-sa1100/collie_pm.c +++ b/arch/arm/mach-sa1100/collie_pm.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/gpio.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -58,6 +59,9 @@ static void collie_charger_init(void) return; } + gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on"); + gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1); + ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON | COLLIE_TC35143_GPIO_BBAT_ON); return; @@ -73,17 +77,11 @@ static void collie_measure_temp(int on) static void collie_charge(int on) { - extern struct platform_device colliescoop_device; - /* Zaurus seems to contain LTC1731; it should know when to * stop charging itself, so setting charge on should be * relatively harmless (as long as it is not done too often). */ - if (on) { - set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); - } else { - reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); - } + gpio_set_value(COLLIE_GPIO_CHARGE_ON, on); } static void collie_discharge(int on) diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index af25a78d705..0eb2f159578 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -42,19 +42,12 @@ #include <asm/mach/serial_sa1100.h> #include <mach/h3600.h> - -#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100) #include <mach/h3600_gpio.h> -#endif - -#ifdef CONFIG_SA1100_H3800 -#include <mach/h3600_asic.h> -#endif #include "generic.h" -struct ipaq_model_ops ipaq_model_ops; -EXPORT_SYMBOL(ipaq_model_ops); +void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level); +EXPORT_SYMBOL(assign_h3600_egpio); static struct mtd_partition h3xxx_partitions[] = { { @@ -63,41 +56,9 @@ static struct mtd_partition h3xxx_partitions[] = { .offset = 0, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { -#ifdef CONFIG_MTD_2PARTS_IPAQ - .name = "H3XXX root jffs2", + .name = "H3XXX rootfs", .size = MTDPART_SIZ_FULL, .offset = 0x00040000, -#else - .name = "H3XXX kernel", - .size = 0x00080000, - .offset = 0x00040000, - }, { - .name = "H3XXX params", - .size = 0x00040000, - .offset = 0x000C0000, - }, { -#ifdef CONFIG_JFFS2_FS - .name = "H3XXX root jffs2", - .size = MTDPART_SIZ_FULL, - .offset = 0x00100000, -#else - .name = "H3XXX initrd", - .size = 0x00100000, - .offset = 0x00100000, - }, { - .name = "H3XXX root cramfs", - .size = 0x00300000, - .offset = 0x00200000, - }, { - .name = "H3XXX usr cramfs", - .size = 0x00800000, - .offset = 0x00500000, - }, { - .name = "H3XXX usr local", - .size = MTDPART_SIZ_FULL, - .offset = 0x00d00000, -#endif -#endif } }; @@ -131,11 +92,7 @@ static int h3600_irda_set_power(struct device *dev, unsigned int state) static void h3600_irda_set_speed(struct device *dev, unsigned int speed) { - if (speed < 4000000) { - clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL); - } else { - set_h3600_egpio(IPAQ_EGPIO_IR_FSEL); - } + assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000)); } static struct irda_platform_data h3600_irda_data = { @@ -266,12 +223,6 @@ static void __init h3xxx_map_io(void) sa1100fb_lcd_power = h3xxx_lcd_power; } -static __inline__ void do_blank(int setp) -{ - if (ipaq_model_ops.blank_callback) - ipaq_model_ops.blank_callback(1-setp); -} - /************************* H3100 *************************/ #ifdef CONFIG_SA1100_H3100 @@ -289,7 +240,6 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp) case IPAQ_EGPIO_LCD_POWER: egpio |= EGPIO_H3600_LCD_ON; gpio |= GPIO_H3100_LCD_3V_ON; - do_blank(setp); break; case IPAQ_EGPIO_LCD_ENABLE: break; @@ -343,25 +293,6 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp) } } -static unsigned long h3100_read_egpio(void) -{ - return h3100_egpio; -} - -static int h3100_pm_callback(int req) -{ - if (ipaq_model_ops.pm_callback_aux) - return ipaq_model_ops.pm_callback_aux(req); - return 0; -} - -static struct ipaq_model_ops h3100_model_ops __initdata = { - .generic_name = "3100", - .control = h3100_control_egpio, - .read = h3100_read_egpio, - .pm_callback = h3100_pm_callback -}; - #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \ | GPIO_H3100_GPIO3 \ | GPIO_H3100_QMUTE \ @@ -387,7 +318,7 @@ static void __init h3100_map_io(void) GAFR &= ~H3100_DIRECT_EGPIO; H3100_EGPIO = h3100_egpio; - ipaq_model_ops = h3100_model_ops; + assign_h3600_egpio = h3100_control_egpio; } MACHINE_START(H3100, "Compaq iPAQ H3100") @@ -420,7 +351,6 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp) EGPIO_H3600_LCD_PCI | EGPIO_H3600_LCD_5V_ON | EGPIO_H3600_LVDD_ON; - do_blank(setp); break; case IPAQ_EGPIO_LCD_ENABLE: break; @@ -471,25 +401,6 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp) } } -static unsigned long h3600_read_egpio(void) -{ - return h3600_egpio; -} - -static int h3600_pm_callback(int req) -{ - if (ipaq_model_ops.pm_callback_aux) - return ipaq_model_ops.pm_callback_aux(req); - return 0; -} - -static struct ipaq_model_ops h3600_model_ops __initdata = { - .generic_name = "3600", - .control = h3600_control_egpio, - .read = h3600_read_egpio, - .pm_callback = h3600_pm_callback -}; - static void __init h3600_map_io(void) { h3xxx_map_io(); @@ -504,7 +415,7 @@ static void __init h3600_map_io(void) GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8; H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */ - ipaq_model_ops = h3600_model_ops; + assign_h3600_egpio = h3600_control_egpio; } MACHINE_START(H3600, "Compaq iPAQ H3600") @@ -519,388 +430,3 @@ MACHINE_END #endif /* CONFIG_SA1100_H3600 */ -#ifdef CONFIG_SA1100_H3800 - -#define SET_ASIC1(x) \ - do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0) - -#define SET_ASIC2(x) \ - do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0) - -#define CLEAR_ASIC1(x) \ - do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0) - -#define CLEAR_ASIC2(x) \ - do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0) - - -/* - On screen enable, we get - - h3800_video_power_on(1) - LCD controller starts - h3800_video_lcd_enable(1) - - On screen disable, we get - - h3800_video_lcd_enable(0) - LCD controller stops - h3800_video_power_on(0) -*/ - - -static void h3800_video_power_on(int setp) -{ - if (setp) { - H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON; - msleep(30); - H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON; - msleep(5); - H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON; - msleep(50); - H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON; - msleep(5); - } else { - msleep(5); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON; - msleep(50); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON; - msleep(5); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON; - msleep(100); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON; - } -} - -static void h3800_video_lcd_enable(int setp) -{ - if (setp) { - msleep(17); // Wait one from before turning on - H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI; - } else { - H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI; - msleep(30); // Wait before turning off - } -} - - -static void h3800_control_egpio(enum ipaq_egpio_type x, int setp) -{ - switch (x) { - case IPAQ_EGPIO_LCD_POWER: - h3800_video_power_on(setp); - break; - case IPAQ_EGPIO_LCD_ENABLE: - h3800_video_lcd_enable(setp); - break; - case IPAQ_EGPIO_CODEC_NRESET: - case IPAQ_EGPIO_AUDIO_ON: - case IPAQ_EGPIO_QMUTE: - printk("%s: error - should not be called\n", __func__); - break; - case IPAQ_EGPIO_OPT_NVRAM_ON: - SET_ASIC2(GPIO2_OPT_ON_NVRAM); - break; - case IPAQ_EGPIO_OPT_ON: - SET_ASIC2(GPIO2_OPT_ON); - break; - case IPAQ_EGPIO_CARD_RESET: - SET_ASIC2(GPIO2_OPT_PCM_RESET); - break; - case IPAQ_EGPIO_OPT_RESET: - SET_ASIC2(GPIO2_OPT_RESET); - break; - case IPAQ_EGPIO_IR_ON: - CLEAR_ASIC1(GPIO1_IR_ON_N); - break; - case IPAQ_EGPIO_IR_FSEL: - break; - case IPAQ_EGPIO_RS232_ON: - SET_ASIC1(GPIO1_RS232_ON); - break; - case IPAQ_EGPIO_VPP_ON: - H3800_ASIC2_FlashWP_VPP_ON = setp; - break; - } -} - -static unsigned long h3800_read_egpio(void) -{ - return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16); -} - -/* We need to fix ASIC2 GPIO over suspend/resume. At the moment, - it doesn't appear that ASIC1 GPIO has the same problem */ - -static int h3800_pm_callback(int req) -{ - static u16 asic1_data; - static u16 asic2_data; - int result = 0; - - printk("%s %d\n", __func__, req); - - switch (req) { - case PM_RESUME: - MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */ - - H3800_ASIC2_GPIOPIOD = asic2_data; - H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ - | GPIO2_SD_DETECT - | GPIO2_EAR_IN_N - | GPIO2_USB_DETECT_N - | GPIO2_SD_CON_SLT; - - H3800_ASIC1_GPIO_OUT = asic1_data; - - if (ipaq_model_ops.pm_callback_aux) - result = ipaq_model_ops.pm_callback_aux(req); - break; - - case PM_SUSPEND: - if (ipaq_model_ops.pm_callback_aux && - ((result = ipaq_model_ops.pm_callback_aux(req)) != 0)) - return result; - - asic1_data = H3800_ASIC1_GPIO_OUT; - asic2_data = H3800_ASIC2_GPIOPIOD; - break; - default: - printk("%s: unrecognized PM callback\n", __func__); - break; - } - return result; -} - -static struct ipaq_model_ops h3800_model_ops __initdata = { - .generic_name = "3800", - .control = h3800_control_egpio, - .read = h3800_read_egpio, - .pm_callback = h3800_pm_callback -}; - -#define MAX_ASIC_ISR_LOOPS 20 - -/* The order of these is important - see #include <mach/irqs.h> */ -static u32 kpio_irq_mask[] = { - KPIO_KEY_ALL, - KPIO_SPI_INT, - KPIO_OWM_INT, - KPIO_ADC_INT, - KPIO_UART_0_INT, - KPIO_UART_1_INT, - KPIO_TIMER_0_INT, - KPIO_TIMER_1_INT, - KPIO_TIMER_2_INT -}; - -static u32 gpio_irq_mask[] = { - GPIO2_PEN_IRQ, - GPIO2_SD_DETECT, - GPIO2_EAR_IN_N, - GPIO2_USB_DETECT_N, - GPIO2_SD_CON_SLT, -}; - -static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) -{ - int i; - - if (0) printk("%s: interrupt received\n", __func__); - - desc->chip->ack(irq); - - for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) { - u32 irq; - int j; - - /* KPIO */ - irq = H3800_ASIC2_KPIINTFLAG; - if (0) printk("%s KPIO 0x%08X\n", __func__, irq); - for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++) - if (irq & kpio_irq_mask[j]) - handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j); - - /* GPIO2 */ - irq = H3800_ASIC2_GPIINTFLAG; - if (0) printk("%s GPIO 0x%08X\n", __func__, irq); - for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++) - if (irq & gpio_irq_mask[j]) - handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j); - } - - if (i >= MAX_ASIC_ISR_LOOPS) - printk("%s: interrupt processing overrun\n", __func__); - - /* For level-based interrupts */ - desc->chip->unmask(irq); - -} - -static struct irqaction h3800_irq = { - .name = "h3800_asic", - .handler = h3800_IRQ_demux, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -}; - -u32 kpio_int_shadow = 0; - - -/* mask_ack <- IRQ is first serviced. - mask <- IRQ is disabled. - unmask <- IRQ is enabled - - The INTCLR registers are poorly documented. I believe that writing - a "1" to the register clears the specific interrupt, but the documentation - indicates writing a "0" clears the interrupt. In any case, they shouldn't - be read (that's the INTFLAG register) - */ - -static void h3800_mask_ack_kpio_irq(unsigned int irq) -{ - u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START]; - kpio_int_shadow &= ~mask; - H3800_ASIC2_KPIINTSTAT = kpio_int_shadow; - H3800_ASIC2_KPIINTCLR = mask; -} - -static void h3800_mask_kpio_irq(unsigned int irq) -{ - u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START]; - kpio_int_shadow &= ~mask; - H3800_ASIC2_KPIINTSTAT = kpio_int_shadow; -} - -static void h3800_unmask_kpio_irq(unsigned int irq) -{ - u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START]; - kpio_int_shadow |= mask; - H3800_ASIC2_KPIINTSTAT = kpio_int_shadow; -} - -static void h3800_mask_ack_gpio_irq(unsigned int irq) -{ - u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START]; - H3800_ASIC2_GPIINTSTAT &= ~mask; - H3800_ASIC2_GPIINTCLR = mask; -} - -static void h3800_mask_gpio_irq(unsigned int irq) -{ - u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START]; - H3800_ASIC2_GPIINTSTAT &= ~mask; - } - -static void h3800_unmask_gpio_irq(unsigned int irq) -{ - u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START]; - H3800_ASIC2_GPIINTSTAT |= mask; -} - -static void __init h3800_init_irq(void) -{ - int i; - - /* Initialize standard IRQs */ - sa1100_init_irq(); - - /* Disable all IRQs and set up clock */ - H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */ - H3800_ASIC2_GPIINTSTAT = 0; - - H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */ - H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */ - -// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */ -// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */ - - H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */ - H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET; - H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET; - H3800_ASIC2_INTR_TimerSet = 1; - -#if 0 - for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) { - int irq = i + H3800_KPIO_IRQ_START; - irq_desc[irq].valid = 1; - irq_desc[irq].probe_ok = 1; - set_irq_chip(irq, &h3800_kpio_irqchip); - } - - for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) { - int irq = i + H3800_GPIO_IRQ_START; - irq_desc[irq].valid = 1; - irq_desc[irq].probe_ok = 1; - set_irq_chip(irq, &h3800_gpio_irqchip); - } -#endif - set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux); -} - - -#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */ - -static void __init h3800_map_io(void) -{ - h3xxx_map_io(); - - /* Add wakeup on AC plug/unplug */ - PWER |= PWER_GPIO12; - - /* Initialize h3800-specific values here */ - GPCR = 0x0fffffff; /* All outputs are set low by default */ - GAFR = GPIO_H3800_CLK_OUT | - GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 | - GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8; - GPDR = GPIO_H3800_CLK_OUT | - GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK | - GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA | - GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 | - GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8; - TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */ - - /* Fix the memory bus */ - MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; - - /* Set up ASIC #1 */ - H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */ - H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */ - H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS; - H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS; - H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N; - H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS; - H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N; - - H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N - | GPIO1_RS232_ON - | GPIO1_EAR_ON_N; - - /* Set up ASIC #2 */ - H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N; - H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N; - - H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ - | GPIO2_SD_DETECT - | GPIO2_EAR_IN_N - | GPIO2_USB_DETECT_N - | GPIO2_SD_CON_SLT; - - /* TODO : Set sleep states & battery fault states */ - - /* Clear VPP Enable */ - H3800_ASIC2_FlashWP_VPP_ON = 0; - ipaq_model_ops = h3800_model_ops; -} - -MACHINE_START(H3800, "Compaq iPAQ H3800") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, - .boot_params = 0xc0000100, - .map_io = h3800_map_io, - .init_irq = h3800_init_irq, - .timer = &sa1100_timer, - .init_machine = h3xxx_mach_init, -MACHINE_END - -#endif /* CONFIG_SA1100_H3800 */ diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index 69e962416e3..9efb569cdb6 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -14,21 +14,21 @@ #define __ASM_ARCH_COLLIE_H -#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11 +#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) +#define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0) #define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12 #define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13 #define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14 #define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15 #define COLLIE_SCP_5VON SCOOP_GPCR_PA16 #define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17 -#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18 +#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7) #define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19 -#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ - COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \ +#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ + COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \ COLLIE_SCP_LB_VOL_CHG ) -#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \ - COLLIE_SCP_CHARGE_ON ) +#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R ) /* GPIOs for which the generic definition doesn't say much */ diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h index 9cc47fddb33..2827faa4742 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600.h +++ b/arch/arm/mach-sa1100/include/mach/h3600.h @@ -29,7 +29,7 @@ typedef int __bitwise pm_request_t; #define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */ /* generalized support for H3xxx series Compaq Pocket PC's */ -#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800()) +#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600()) /* Physical memory regions corresponding to chip selects */ #define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) @@ -93,76 +93,7 @@ enum ipaq_egpio_type { IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */ }; -struct ipaq_model_ops { - const char *generic_name; - void (*control)(enum ipaq_egpio_type, int); - unsigned long (*read)(void); - void (*blank_callback)(int blank); - int (*pm_callback)(int req); /* Primary model callback */ - int (*pm_callback_aux)(int req); /* Secondary callback (used by HAL modules) */ -}; - -extern struct ipaq_model_ops ipaq_model_ops; - -static __inline__ const char * h3600_generic_name(void) -{ - return ipaq_model_ops.generic_name; -} - -static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,level); -} - -static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,0); -} - -static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,1); -} - -static __inline__ unsigned long read_h3600_egpio(void) -{ - if (ipaq_model_ops.read) - return ipaq_model_ops.read(); - return 0; -} - -static __inline__ int h3600_register_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = f; - return 0; -} - -static __inline__ void h3600_unregister_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = NULL; -} - - -static __inline__ int h3600_register_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = f; - return 0; -} - -static __inline__ void h3600_unregister_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = NULL; -} - -static __inline__ int h3600_power_management(int req) -{ - if (ipaq_model_ops.pm_callback) - return ipaq_model_ops.pm_callback(req); - return 0; -} +extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level); #endif /* ASSEMBLY */ diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h index 62b0b787968..a36ca76d018 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h +++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h @@ -48,22 +48,11 @@ #define GPIO_H3600_OPT_LOCK GPIO_GPIO (22) #define GPIO_H3600_OPT_DET GPIO_GPIO (27) -/* H3800 specific pins */ -#define GPIO_H3800_AC_IN GPIO_GPIO (12) -#define GPIO_H3800_COM_DSR GPIO_GPIO (13) -#define GPIO_H3800_MMC_INT GPIO_GPIO (18) -#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */ -#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22) -#define GPIO_H3800_CLK_OUT GPIO_GPIO (27) - /****************************************************/ #define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18 #define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27 -#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18 -#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */ - /* H3100 / 3600 EGPIO pins */ #define EGPIO_H3600_VPP_ON (1 << 0) #define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */ @@ -84,457 +73,5 @@ #define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */ #define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */ -/********************* H3800, ASIC #2 ********************/ - -#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT) -#define H3800_ASIC2_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) -#define H3800_ASIC2_NOFFSET(s,x,n,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) - -#define _H3800_ASIC2_GPIO_Base 0x0000 -#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */ -#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */ -#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */ -#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */ -#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */ - -#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType ) -#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType ) -#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType ) -#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear ) -#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag ) -#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data ) -#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut ) -#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable ) -#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate ) - -#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */ -#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */ -#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */ -#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */ -#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */ -#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */ -#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */ -#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */ -#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */ -#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */ -#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */ -#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */ - -#define _H3800_ASIC2_KPIO_Base 0x0200 -#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */ -#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */ -#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */ - -#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction ) -#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType ) -#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType ) -#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType ) -#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear ) -#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag ) -#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data ) -#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut ) -#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable ) -#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate ) - -#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 ) -#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 ) -#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 ) -#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 ) -#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 ) -#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 ) -#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 ) -#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 ) - -#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */ -#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */ -#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */ -#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */ -#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */ -#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */ -#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */ -#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */ -#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */ -#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */ -#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */ -#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */ - -/* Alternate KPIO functions (set by default) */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */ - -#define _H3800_ASIC2_SPI_Base 0x0400 -#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */ - -#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control ) -#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data ) -#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled ) - -#define _H3800_ASIC2_PWM_0_Base 0x0600 -#define _H3800_ASIC2_PWM_1_Base 0x0700 -#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */ -#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */ - -#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase ) -#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime ) -#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime ) - -#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase ) -#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime ) -#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime ) - -#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */ -#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */ -#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */ - -#define _H3800_ASIC2_LED_0_Base 0x0800 -#define _H3800_ASIC2_LED_1_Base 0x0880 -#define _H3800_ASIC2_LED_2_Base 0x0900 -#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */ -#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */ - -#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase ) -#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime ) -#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime ) -#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock ) - -#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase ) -#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime ) -#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime ) -#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock ) - -#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase ) -#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime ) -#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime ) -#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock ) - -#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */ -#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */ -#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 ) -#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */ - -#define _H3800_ASIC2_UART_0_Base 0x0A00 -#define _H3800_ASIC2_UART_1_Base 0x0C00 -#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */ -#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */ -#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */ - -#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive ) -#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit ) -#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable ) -#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify ) -#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl ) -#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl ) -#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus ) -#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus ) -#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad ) -#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL ) -#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH ) - -#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive ) -#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit ) -#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable ) -#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify ) -#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl ) -#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl ) -#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus ) -#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus ) -#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad ) -#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL ) -#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH ) - -#define _H3800_ASIC2_TIMER_Base 0x0E00 -#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */ - -#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command ) - -#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */ -#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */ -#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */ -#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */ -#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */ -#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */ -#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */ -#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */ - -#define _H3800_ASIC2_CLOCK_Base 0x1000 -#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */ - -#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable ) - -#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */ -#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */ -#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */ -#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */ -#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */ -#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */ -#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */ -#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */ -#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */ -#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */ -#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */ -#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */ -#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */ - -#define _H3800_ASIC2_ADC_Base 0x1200 -#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */ -#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */ - -#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer ) -#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus ) -#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data ) - -#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */ -#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */ - -#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */ -#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 ) -#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 ) -#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */ -#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */ - - -#define _H3800_ASIC2_INTR_Base 0x1600 -#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */ -#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */ -#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */ - -#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag ) -#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale ) -#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet ) - -#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */ -#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 ) -#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 ) -#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 ) -#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 ) - -#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */ -#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */ - - -#define _H3800_ASIC2_OWM_Base 0x1800 -#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */ -#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */ -#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */ -#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */ -#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */ - -#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command ) -#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data ) -#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt ) -#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable ) -#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor ) - -#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */ -#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */ -#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */ -#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */ - -#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */ -#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */ -#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */ -#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */ -#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */ - -#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */ -#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */ -#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */ - -#define _H3800_ASIC2_FlashCtl_Base 0x1A00 - -/****************************************************/ -/* H3800, ASIC #1 - * This ASIC is accesed through ASIC #2, and - * mapped into the 1c00 - 1f00 region - */ - -#define H3800_ASIC1_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1)))) - -#define _H3800_ASIC1_MMC_Base 0x1c00 - -#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */ -#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */ -#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */ -#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */ -#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */ -#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */ -#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */ -#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */ -#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */ -#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */ -#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */ -#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */ -#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */ - -#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock ) -#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status ) -#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate ) -#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister ) -#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont ) -#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout ) -#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout ) -#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength ) -#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks ) -#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask ) -#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber ) -#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH ) -#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL ) -#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo ) -#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull ) - -#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */ -#define H3800_ASIC1_MMC_START_CLOCK (1 << 1) - -#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0) -#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1) -#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2) -#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3) -#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */ -#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5) -#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6) -#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7) -#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */ -#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */ -#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */ -#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */ - -#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */ -#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */ -#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */ -#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */ - -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */ - -#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0) -#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1) -#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2) -#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3) - -#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0) - -/********* GPIO **********/ - -#define _H3800_ASIC1_GPIO_Base 0x1e00 - -#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */ -#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */ -#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */ -#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */ -#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */ -#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */ -#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */ -#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */ -#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */ -#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */ -#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */ -#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */ - -#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask ) -#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out ) -#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType ) -#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger ) -#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger ) -#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus ) -#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus ) -#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State ) -#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset ) -#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask ) -#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir ) -#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut ) -#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status ) -#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir ) -#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut ) - -#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0) -#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1) -#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2) -#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3) -#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4) -#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5) - -#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0) -#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1) -#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2) - -/* These are all outputs */ -#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */ -#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */ -#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */ -#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */ -#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */ -#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */ -#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */ -#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */ -#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */ -#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */ -#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */ -#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */ -#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */ -#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */ -#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */ - -/* Write enable for the flash */ - -#define _H3800_ASIC1_FlashWP_Base 0x1F00 -#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */ -#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON ) #endif /* _INCLUDE_H3600_GPIO_H_ */ diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index 0cb36609b3a..ae81f80b0cf 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -153,8 +153,6 @@ */ #ifdef CONFIG_SA1111 #define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SA1100_H3800) -#define NR_IRQS (IRQ_BOARD_END) #elif defined(CONFIG_SHARP_LOCOMO) #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #else @@ -175,23 +173,3 @@ #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) -/* H3800-specific IRQs (CONFIG_SA1100_H3800) */ -#define H3800_KPIO_IRQ_START (IRQ_BOARD_START) -#define IRQ_H3800_KEY (IRQ_BOARD_START + 0) -#define IRQ_H3800_SPI (IRQ_BOARD_START + 1) -#define IRQ_H3800_OWM (IRQ_BOARD_START + 2) -#define IRQ_H3800_ADC (IRQ_BOARD_START + 3) -#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4) -#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5) -#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6) -#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7) -#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8) -#define H3800_KPIO_IRQ_COUNT 9 - -#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9) -#define IRQ_H3800_PEN (IRQ_BOARD_START + 9) -#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10) -#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11) -#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12) -#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13) -#define H3800_GPIO_IRQ_COUNT 5 diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h index 63755ca5b1b..942b153e251 100644 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ b/arch/arm/mach-sa1100/include/mach/system.h @@ -10,7 +10,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { if (mode == 's') { /* Jump into ROM at address 0 */ diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 81848aa9642..fd776bb666c 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -226,12 +226,22 @@ static struct platform_device jornada_ssp_device = { .id = -1, }; +static struct platform_device jornada_kbd_device = { + .name = "jornada720_kbd", + .id = -1, +}; + +static struct platform_device jornada_ts_device = { + .name = "jornada_ts", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, -#ifdef CONFIG_SA1100_JORNADA720_SSP &jornada_ssp_device, -#endif &s1d13xxxfb_device, + &jornada_kbd_device, + &jornada_ts_device, }; static int __init jornada720_init(void) diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a23fd3d0163..358d875ace1 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -16,12 +16,28 @@ #include <asm/leds.h> #include <asm/param.h> -#include <mach/hardware.h> - #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#define IO_BASE 0xe0000000 +#define IO_SIZE 0x08000000 +#define IO_START 0x40000000 +#define ROMCARD_SIZE 0x08000000 +#define ROMCARD_START 0x10000000 + +void arch_reset(char mode, const char *cmd) +{ + short temp; + local_irq_disable(); + /* Reset the Machine via pc[3] of the sequoia chipset */ + outw(0x09,0x24); + temp=inw(0x26); + temp = temp | (1<<3) | (1<<10); + outw(0x09,0x24); + outw(temp,0x26); +} + static struct plat_serial8250_port serial_platform_data[] = { { .iobase = 0x3f8, @@ -50,14 +66,38 @@ static struct platform_device serial_device = { }, }; +static struct resource rtc_resources[] = { + [0] = { + .start = 0x70, + .end = 0x73, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = IRQ_ISA_RTC_ALARM, + .end = IRQ_ISA_RTC_ALARM, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), +}; + static int __init shark_init(void) { int ret; if (machine_is_shark()) + { + ret = platform_device_register(&rtc_device); + if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret); ret = platform_device_register(&serial_device); - - return ret; + if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret); + } + return 0; } arch_initcall(shark_init); diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c index 6774b8d5d13..10b5b8b3272 100644 --- a/arch/arm/mach-shark/dma.c +++ b/arch/arm/mach-shark/dma.c @@ -13,9 +13,11 @@ #include <asm/dma.h> #include <asm/mach/dma.h> -void __init arch_dma_init(dma_t *dma) +static int __init shark_dma_init(void) { #ifdef CONFIG_ISA_DMA - isa_init_dma(dma); + isa_init_dma(); #endif + return 0; } +core_initcall(shark_dma_init); diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index 0836cb78b29..f97a7626bd5 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -27,5 +27,3 @@ bne 1001b .endm - .macro waituart,rd,rx - .endm diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h new file mode 100644 index 00000000000..84a5bf6e5ba --- /dev/null +++ b/arch/arm/mach-shark/include/mach/framebuffer.h @@ -0,0 +1,16 @@ +/* + * arch/arm/mach-shark/include/mach/framebuffer.h + * + * by Alexander Schulz + * + */ + +#ifndef __ASM_ARCH_FRAMEBUFFER_H +#define __ASM_ARCH_FRAMEBUFFER_H + +/* defines for the Framebuffer */ +#define FB_START 0x06000000 +#define FB_SIZE 0x01000000 + +#endif + diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h index 01bf76099ce..94d84b27a0c 100644 --- a/arch/arm/mach-shark/include/mach/hardware.h +++ b/arch/arm/mach-shark/include/mach/hardware.h @@ -10,35 +10,8 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#ifndef __ASSEMBLY__ - -/* - * Mapping areas - */ -#define IO_BASE 0xe0000000 - -#else - -#define IO_BASE 0 - -#endif - -#define IO_SIZE 0x08000000 -#define IO_START 0x40000000 -#define ROMCARD_SIZE 0x08000000 -#define ROMCARD_START 0x10000000 - - -/* defines for the Framebuffer */ -#define FB_START 0x06000000 -#define FB_SIZE 0x01000000 - #define UNCACHEABLE_ADDR 0xdf010000 -#define SEQUOIA_LED_GREEN (1<<6) -#define SEQUOIA_LED_AMBER (1<<5) -#define SEQUOIA_LED_BACK (1<<7) - #define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x6000 diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h index c5cee829fc8..9ccbcecc430 100644 --- a/arch/arm/mach-shark/include/mach/io.h +++ b/arch/arm/mach-shark/include/mach/io.h @@ -11,10 +11,10 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define PCIO_BASE 0xe0000000 -#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_LIMIT 0xffffffff -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#define __mem_pci(addr) (addr) +#define __io(a) ((void __iomem *)(0xe0000000 + (a))) + +#define __mem_pci(addr) (addr) #endif diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h index 0586acd7cdd..c8e8a4e1f61 100644 --- a/arch/arm/mach-shark/include/mach/irqs.h +++ b/arch/arm/mach-shark/include/mach/irqs.h @@ -7,7 +7,7 @@ #define NR_IRQS 16 #define IRQ_ISA_KEYBOARD 1 -#define RTC_IRQ 8 +#define IRQ_ISA_RTC_ALARM 8 #define I8042_KBD_IRQ 1 #define I8042_AUX_IRQ 12 #define IRQ_HARDDISK 14 diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h index 864298ff392..96c43b8f8dd 100644 --- a/arch/arm/mach-shark/include/mach/isa-dma.h +++ b/arch/arm/mach-shark/include/mach/isa-dma.h @@ -6,10 +6,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -/* Use only the lowest 4MB, nothing else works. - * The rest is not DMAable. See dev / .properties - * in OpenFirmware. - */ #define MAX_DMA_CHANNELS 8 #define DMA_ISA_CASCADE 4 diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h index c5ab038925d..3053e5b7f16 100644 --- a/arch/arm/mach-shark/include/mach/memory.h +++ b/arch/arm/mach-shark/include/mach/memory.h @@ -23,6 +23,7 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig { if (node != 0) return; /* Only the first 4 MB (=1024 Pages) are usable for DMA */ + /* See dev / -> .properties in OpenFirmware. */ zone_size[1] = zone_size[0] - 1024; zone_size[0] = 1024; zhole_size[1] = zhole_size[0]; diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h index e45bd734a03..21c373b30bb 100644 --- a/arch/arm/mach-shark/include/mach/system.h +++ b/arch/arm/mach-shark/include/mach/system.h @@ -6,20 +6,8 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> - -static void arch_reset(char mode) -{ - short temp; - local_irq_disable(); - /* Reset the Machine via pc[3] of the sequoia chipset */ - outw(0x09,0x24); - temp=inw(0x26); - temp = temp | (1<<3) | (1<<10); - outw(0x09,0x24); - outw(temp,0x26); - -} +/* Found in arch/mach-shark/core.c */ +extern void arch_reset(char mode, const char *cmd); static inline void arch_idle(void) { diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h index 3725e163341..22ccab4c3c5 100644 --- a/arch/arm/mach-shark/include/mach/uncompress.h +++ b/arch/arm/mach-shark/include/mach/uncompress.h @@ -11,7 +11,7 @@ static inline void putc(int c) { - int t; + volatile int t; SERIAL_BASE[0] = c; t=0x10000; diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c index 8bd8d6bb4d9..c9e32de4adf 100644 --- a/arch/arm/mach-shark/leds.c +++ b/arch/arm/mach-shark/leds.c @@ -22,12 +22,16 @@ #include <linux/ioport.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> #define LED_STATE_ENABLED 1 #define LED_STATE_CLAIMED 2 + +#define SEQUOIA_LED_GREEN (1<<6) +#define SEQUOIA_LED_AMBER (1<<5) +#define SEQUOIA_LED_BACK (1<<7) + static char led_state; static short hw_led_state; static short saved_state; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 1c43494f5c4..565776680d8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -335,11 +335,25 @@ static struct resource versatile_i2c_resource = { static struct platform_device versatile_i2c_device = { .name = "versatile-i2c", - .id = -1, + .id = 0, .num_resources = 1, .resource = &versatile_i2c_resource, }; +static struct i2c_board_info versatile_i2c_board_info[] = { + { + I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), + .type = "ds1338", + }, +}; + +static int __init versatile_i2c_init(void) +{ + return i2c_register_board_info(0, versatile_i2c_board_info, + ARRAY_SIZE(versatile_i2c_board_info)); +} +arch_initcall(versatile_i2c_init); + #define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET) unsigned int mmc_status(struct device *dev) diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h index c59e6100c7e..8ffc12a7cb2 100644 --- a/arch/arm/mach-versatile/include/mach/system.h +++ b/arch/arm/mach-versatile/include/mach/system.h @@ -34,7 +34,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { u32 val; diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h index 40ff40845df..de29ddcb945 100644 --- a/arch/arm/mach-w90x900/cpu.h +++ b/arch/arm/mach-w90x900/cpu.h @@ -43,35 +43,16 @@ extern void w90p910_init_io(struct map_desc *mach_desc, int size); extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no); extern void w90p910_init_clocks(int xtal); extern void w90p910_map_io(struct map_desc *mach_desc, int size); +extern struct platform_device w90p910_serial_device; extern struct sys_timer w90x900_timer; -#define W90X900_RES(name) \ -struct resource w90x900_##name##_resource[] = { \ - [0] = { \ - .start = name##_PA, \ - .end = name##_PA + 0x0ff, \ - .flags = IORESOURCE_MEM, \ - }, \ - [1] = { \ - .start = IRQ_##name, \ - .end = IRQ_##name, \ - .flags = IORESOURCE_IRQ, \ - } \ -} - -#define W90X900_DEVICE(devname, regname, devid, platdevname) \ -struct platform_device w90x900_##devname = { \ - .name = platdevname, \ - .id = devid, \ - .num_resources = ARRAY_SIZE(w90x900_##regname##_resource), \ - .resource = w90x900_##regname##_resource, \ -} - -#define W90X900_UARTCFG(port, flag, uc, ulc, ufc) \ -{ \ - .hwport = port, \ - .flags = flag, \ - .ucon = uc, \ - .ulcon = ulc, \ - .ufcon = ufc, \ +#define W90X900_8250PORT(name) \ +{ \ + .membase = name##_BA, \ + .mapbase = name##_PA, \ + .irq = IRQ_##name, \ + .uartclk = 11313600, \ + .regshift = 2, \ + .iotype = UPIO_MEM, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ } diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h index 93753f92261..94064006685 100644 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ b/arch/arm/mach-w90x900/include/mach/system.h @@ -21,7 +21,7 @@ static void arch_idle(void) { } -static void arch_reset(char mode) +static void arch_reset(char mode, const char *cmd) { cpu_reset(0); } diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c index 9ebc93f4853..726ff6798a5 100644 --- a/arch/arm/mach-w90x900/mach-w90p910evb.c +++ b/arch/arm/mach-w90x900/mach-w90p910evb.c @@ -22,6 +22,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/mtd/physmap.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,28 +33,67 @@ #include <mach/map.h> #include "cpu.h" +/*w90p910 evb norflash driver data */ -static struct map_desc w90p910_iodesc[] __initdata = { +#define W90P910_FLASH_BASE 0xA0000000 +#define W90P910_FLASH_SIZE 0x400000 + +static struct mtd_partition w90p910_flash_partitions[] = { + { + .name = "NOR Partition 1 for kernel (960K)", + .size = 0xF0000, + .offset = 0x10000, + }, + { + .name = "NOR Partition 2 for image (1M)", + .size = 0x100000, + .offset = 0x100000, + }, + { + .name = "NOR Partition 3 for user (2M)", + .size = 0x200000, + .offset = 0x00200000, + } }; -static struct w90x900_uartcfg w90p910_uartcfgs[] = { - W90X900_UARTCFG(0, 0, 0, 0, 0), - W90X900_UARTCFG(1, 0, 0, 0, 0), - W90X900_UARTCFG(2, 0, 0, 0, 0), - W90X900_UARTCFG(3, 0, 0, 0, 0), - W90X900_UARTCFG(4, 0, 0, 0, 0), +static struct physmap_flash_data w90p910_flash_data = { + .width = 2, + .parts = w90p910_flash_partitions, + .nr_parts = ARRAY_SIZE(w90p910_flash_partitions), +}; + +static struct resource w90p910_flash_resources[] = { + { + .start = W90P910_FLASH_BASE, + .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device w90p910_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &w90p910_flash_data, + }, + .resource = w90p910_flash_resources, + .num_resources = ARRAY_SIZE(w90p910_flash_resources), +}; + +static struct map_desc w90p910_iodesc[] __initdata = { }; /*Here should be your evb resourse,such as LCD*/ static struct platform_device *w90p910evb_dev[] __initdata = { + &w90p910_serial_device, + &w90p910_flash_device, }; static void __init w90p910evb_map_io(void) { w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc)); w90p910_init_clocks(0); - w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs)); } static void __init w90p910evb_init(void) diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c index aa783bc9431..2bcbaa681b9 100644 --- a/arch/arm/mach-w90x900/w90p910.c +++ b/arch/arm/mach-w90x900/w90p910.c @@ -25,6 +25,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/serial_8250.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -36,12 +37,6 @@ #include "cpu.h" -/*W90P910 has five uarts*/ - -#define MAX_UART_COUNT 5 -static int uart_count; -static struct platform_device *uart_devs[MAX_UART_COUNT-1]; - /* Initial IO mappings */ static struct map_desc w90p910_iodesc[] __initdata = { @@ -53,48 +48,19 @@ static struct map_desc w90p910_iodesc[] __initdata = { /*IODESC_ENT(LCD),*/ }; -/*Init the dev resource*/ - -static W90X900_RES(UART0); -static W90X900_RES(UART1); -static W90X900_RES(UART2); -static W90X900_RES(UART3); -static W90X900_RES(UART4); -static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart"); -static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart"); -static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart"); -static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart"); -static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart"); - -static struct platform_device *uart_devices[] __initdata = { - &w90x900_uart0, - &w90x900_uart1, - &w90x900_uart2, - &w90x900_uart3, - &w90x900_uart4 -}; +/* Initial serial platform data */ -/*Init W90P910 uart device*/ +struct plat_serial8250_port w90p910_uart_data[] = { + W90X900_8250PORT(UART0), +}; -void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no) -{ - struct platform_device *platdev; - int uart, uartdev; - - /*By min() to judge count of uart be used indeed*/ - - uartdev = ARRAY_SIZE(uart_devices); - no = min(uartdev, no); - - for (uart = 0; uart < no; uart++, cfg++) { - if (cfg->hwport != uart) - printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart); - platdev = uart_devices[cfg->hwport]; - uart_devs[uart] = platdev; - platdev->dev.platform_data = cfg; - } - uart_count = uart; -} +struct platform_device w90p910_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = w90p910_uart_data, + }, +}; /*Init W90P910 evb io*/ @@ -122,13 +88,6 @@ static int __init w90p910_init_cpu(void) static int __init w90x900_arch_init(void) { - int ret; - - ret = w90p910_init_cpu(); - if (ret != 0) - return ret; - - return platform_add_devices(uart_devs, uart_count); - + return w90p910_init_cpu(); } arch_initcall(w90x900_arch_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index d490f3773c0..20979564e7e 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -186,6 +186,24 @@ config CPU_ARM926T Say Y if you want support for the ARM926T processor. Otherwise, say N. +# FA526 +config CPU_FA526 + bool + select CPU_32v4 + select CPU_ABRT_EV4 + select CPU_PABRT_NOIFAR + select CPU_CACHE_VIVT + select CPU_CP15_MMU + select CPU_CACHE_FA + select CPU_COPY_FA if MMU + select CPU_TLB_FA if MMU + help + The FA526 is a version of the ARMv4 compatible processor with + Branch Target Buffer, Unified TLB and cache line size 16. + + Say Y if you want support for the FA526 processor. + Otherwise, say N. + # ARM940T config CPU_ARM940T bool "Support ARM940T processor" if ARCH_INTEGRATOR @@ -340,6 +358,17 @@ config CPU_XSC3 select CPU_TLB_V4WBI if MMU select IO_36 +# Marvell PJ1 (Mohawk) +config CPU_MOHAWK + bool + select CPU_32v5 + select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR + select CPU_CACHE_VIVT + select CPU_CP15_MMU + select CPU_TLB_V4WBI if MMU + select CPU_COPY_V4WB if MMU + # Feroceon config CPU_FEROCEON bool @@ -484,6 +513,9 @@ config CPU_CACHE_VIVT config CPU_CACHE_VIPT bool +config CPU_CACHE_FA + bool + if MMU # The copy-page model config CPU_COPY_V3 @@ -498,6 +530,9 @@ config CPU_COPY_V4WB config CPU_COPY_FEROCEON bool +config CPU_COPY_FA + bool + config CPU_COPY_V6 bool @@ -528,6 +563,13 @@ config CPU_TLB_FEROCEON help Feroceon TLB (v4wbi with non-outer-cachable page table walks). +config CPU_TLB_FA + bool + help + Faraday ARM FA526 architecture, unified TLB with writeback cache + and invalidate instruction cache entry. Branch target buffer is + also supported. + config CPU_TLB_V6 bool @@ -569,7 +611,7 @@ comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON default y help Say Y if you want to include kernel support for running user space @@ -638,7 +680,7 @@ config CPU_DCACHE_SIZE config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you @@ -653,7 +695,7 @@ config CPU_CACHE_ROUND_ROBIN config CPU_BPREDICT_DISABLE bool "Disable branch prediction" - depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 + depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 help Say Y here to disable branch prediction. If unsure, say N. @@ -704,7 +746,8 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP + depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ + REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 default y select OUTER_CACHE help diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 480f78a3611..63e3f6dd0e2 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o obj-$(CONFIG_DISCONTIGMEM) += discontig.o +obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o @@ -32,6 +33,7 @@ obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o +obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o @@ -41,6 +43,7 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o +obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o @@ -49,6 +52,7 @@ obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o obj-$(CONFIG_CPU_TLB_FEROCEON) += tlb-v4wbi.o # reuse v4wbi TLB functions obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o +obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o @@ -62,6 +66,7 @@ obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o +obj-$(CONFIG_CPU_FA526) += proc-fa526.o obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o @@ -70,6 +75,7 @@ obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o +obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S new file mode 100644 index 00000000000..b63a8f7b95c --- /dev/null +++ b/arch/arm/mm/cache-fa.S @@ -0,0 +1,220 @@ +/* + * linux/arch/arm/mm/cache-fa.S + * + * Copyright (C) 2005 Faraday Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * Based on cache-v4wb.S: + * Copyright (C) 1997-2002 Russell king + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Processors: FA520 FA526 FA626 + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/memory.h> +#include <asm/page.h> + +#include "proc-macros.S" + +/* + * The size of one data cache line. + */ +#define CACHE_DLINESIZE 16 + +/* + * The total size of the data cache. + */ +#ifdef CONFIG_ARCH_GEMINI +#define CACHE_DSIZE 8192 +#else +#define CACHE_DSIZE 16384 +#endif + +/* FIXME: put optimal value here. Current one is just estimation */ +#define CACHE_DLIMIT (CACHE_DSIZE * 2) + +/* + * flush_user_cache_all() + * + * Clean and invalidate all cache entries in a particular address + * space. + */ +ENTRY(fa_flush_user_cache_all) + /* FALLTHROUGH */ +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(fa_flush_kern_cache_all) + mov ip, #0 + mov r2, #VM_EXEC +__flush_whole_cache: + mcr p15, 0, ip, c7, c14, 0 @ clean/invalidate D cache + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB + mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer + mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush + mov pc, lr + +/* + * flush_user_cache_range(start, end, flags) + * + * Invalidate a range of cache entries in the specified + * address space. + * + * - start - start address (inclusive, page aligned) + * - end - end address (exclusive, page aligned) + * - flags - vma_area_struct flags describing address space + */ +ENTRY(fa_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #CACHE_DLIMIT @ total size >= limit? + bhs __flush_whole_cache @ flush whole D cache + +1: tst r2, #VM_EXEC + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I line + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB + mcrne p15, 0, ip, c7, c10, 4 @ data write barrier + mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(fa_coherent_kern_range) + /* fall through */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(fa_coherent_user_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c5, 4 @ prefetch flush + mov pc, lr + +/* + * flush_kern_dcache_page(kaddr) + * + * Ensure that the data held in the page kaddr is written back + * to the page in question. + * + * - kaddr - kernel address (guaranteed to be page aligned) + */ +ENTRY(fa_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(fa_dma_inv_range) + tst r0, #CACHE_DLINESIZE - 1 + bic r0, r0, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry + tst r1, #CACHE_DLINESIZE - 1 + bic r1, r1, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D entry +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean (write back) the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(fa_dma_clean_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mov pc, lr + +/* + * dma_flush_range(start,end) + * - start - virtual start address of region + * - end - virtual end address of region + */ +ENTRY(fa_dma_flush_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mov pc, lr + + __INITDATA + + .type fa_cache_fns, #object +ENTRY(fa_cache_fns) + .long fa_flush_kern_cache_all + .long fa_flush_user_cache_all + .long fa_flush_user_cache_range + .long fa_coherent_kern_range + .long fa_coherent_user_range + .long fa_flush_kern_dcache_page + .long fa_dma_inv_range + .long fa_dma_clean_range + .long fa_dma_flush_range + .size fa_cache_fns, . - fa_cache_fns diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 80cd207cbae..d6dd83826f8 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -14,8 +14,12 @@ #include <linux/init.h> #include <asm/cacheflush.h> +#include <asm/kmap_types.h> +#include <asm/fixmap.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> #include <plat/cache-feroceon-l2.h> - +#include "mm.h" /* * Low-level cache maintenance operations. @@ -34,14 +38,36 @@ * The range operations require two successive cp15 writes, in * between which we don't want to be preempted. */ + +static inline unsigned long l2_start_va(unsigned long paddr) +{ +#ifdef CONFIG_HIGHMEM + /* + * Let's do our own fixmap stuff in a minimal way here. + * Because range ops can't be done on physical addresses, + * we simply install a virtual mapping for it only for the + * TLB lookup to occur, hence no need to flush the untouched + * memory mapping. This is protected with the disabling of + * interrupts by the caller. + */ + unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id(); + unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0); + local_flush_tlb_kernel_page(vaddr); + return vaddr + (paddr & ~PAGE_MASK); +#else + return __phys_to_virt(paddr); +#endif +} + static inline void l2_clean_pa(unsigned long addr) { __asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr)); } -static inline void l2_clean_mva_range(unsigned long start, unsigned long end) +static inline void l2_clean_pa_range(unsigned long start, unsigned long end) { - unsigned long flags; + unsigned long va_start, va_end, flags; /* * Make sure 'start' and 'end' reference the same page, as @@ -51,17 +77,14 @@ static inline void l2_clean_mva_range(unsigned long start, unsigned long end) BUG_ON((start ^ end) >> PAGE_SHIFT); raw_local_irq_save(flags); + va_start = l2_start_va(start); + va_end = va_start + (end - start); __asm__("mcr p15, 1, %0, c15, c9, 4\n\t" "mcr p15, 1, %1, c15, c9, 5" - : : "r" (start), "r" (end)); + : : "r" (va_start), "r" (va_end)); raw_local_irq_restore(flags); } -static inline void l2_clean_pa_range(unsigned long start, unsigned long end) -{ - l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end)); -} - static inline void l2_clean_inv_pa(unsigned long addr) { __asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr)); @@ -72,9 +95,9 @@ static inline void l2_inv_pa(unsigned long addr) __asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr)); } -static inline void l2_inv_mva_range(unsigned long start, unsigned long end) +static inline void l2_inv_pa_range(unsigned long start, unsigned long end) { - unsigned long flags; + unsigned long va_start, va_end, flags; /* * Make sure 'start' and 'end' reference the same page, as @@ -84,17 +107,14 @@ static inline void l2_inv_mva_range(unsigned long start, unsigned long end) BUG_ON((start ^ end) >> PAGE_SHIFT); raw_local_irq_save(flags); + va_start = l2_start_va(start); + va_end = va_start + (end - start); __asm__("mcr p15, 1, %0, c15, c11, 4\n\t" "mcr p15, 1, %1, c15, c11, 5" - : : "r" (start), "r" (end)); + : : "r" (va_start), "r" (va_end)); raw_local_irq_restore(flags); } -static inline void l2_inv_pa_range(unsigned long start, unsigned long end) -{ - l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end)); -} - /* * Linux primitives. diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 464de893a98..5d180cb0bd9 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -17,12 +17,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/io.h> - #include <asm/system.h> #include <asm/cputype.h> #include <asm/cacheflush.h> +#include <asm/kmap_types.h> +#include <asm/fixmap.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> +#include "mm.h" #define CR_L2 (1 << 26) @@ -47,21 +49,11 @@ static inline void xsc3_l2_clean_mva(unsigned long addr) __asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr)); } -static inline void xsc3_l2_clean_pa(unsigned long addr) -{ - xsc3_l2_clean_mva(__phys_to_virt(addr)); -} - static inline void xsc3_l2_inv_mva(unsigned long addr) { __asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr)); } -static inline void xsc3_l2_inv_pa(unsigned long addr) -{ - xsc3_l2_inv_mva(__phys_to_virt(addr)); -} - static inline void xsc3_l2_inv_all(void) { unsigned long l2ctype, set_way; @@ -79,50 +71,103 @@ static inline void xsc3_l2_inv_all(void) dsb(); } +#ifdef CONFIG_HIGHMEM +#define l2_map_save_flags(x) raw_local_save_flags(x) +#define l2_map_restore_flags(x) raw_local_irq_restore(x) +#else +#define l2_map_save_flags(x) ((x) = 0) +#define l2_map_restore_flags(x) ((void)(x)) +#endif + +static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va, + unsigned long flags) +{ +#ifdef CONFIG_HIGHMEM + unsigned long va = prev_va & PAGE_MASK; + unsigned long pa_offset = pa << (32 - PAGE_SHIFT); + if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) { + /* + * Switching to a new page. Because cache ops are + * using virtual addresses only, we must put a mapping + * in place for it. We also enable interrupts for a + * short while and disable them again to protect this + * mapping. + */ + unsigned long idx; + raw_local_irq_restore(flags); + idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id(); + va = __fix_to_virt(FIX_KMAP_BEGIN + idx); + raw_local_irq_restore(flags | PSR_I_BIT); + set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0); + local_flush_tlb_kernel_page(va); + } + return va + (pa_offset >> (32 - PAGE_SHIFT)); +#else + return __phys_to_virt(pa); +#endif +} + static void xsc3_l2_inv_range(unsigned long start, unsigned long end) { + unsigned long vaddr, flags; + if (start == 0 && end == -1ul) { xsc3_l2_inv_all(); return; } + vaddr = -1; /* to force the first mapping */ + l2_map_save_flags(flags); + /* * Clean and invalidate partial first cache line. */ if (start & (CACHE_LINE_SIZE - 1)) { - xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1)); - xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1)); + vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags); + xsc3_l2_clean_mva(vaddr); + xsc3_l2_inv_mva(vaddr); start = (start | (CACHE_LINE_SIZE - 1)) + 1; } /* - * Clean and invalidate partial last cache line. + * Invalidate all full cache lines between 'start' and 'end'. */ - if (start < end && (end & (CACHE_LINE_SIZE - 1))) { - xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1)); - xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); - end &= ~(CACHE_LINE_SIZE - 1); + while (start < (end & ~(CACHE_LINE_SIZE - 1))) { + vaddr = l2_map_va(start, vaddr, flags); + xsc3_l2_inv_mva(vaddr); + start += CACHE_LINE_SIZE; } /* - * Invalidate all full cache lines between 'start' and 'end'. + * Clean and invalidate partial last cache line. */ - while (start < end) { - xsc3_l2_inv_pa(start); - start += CACHE_LINE_SIZE; + if (start < end) { + vaddr = l2_map_va(start, vaddr, flags); + xsc3_l2_clean_mva(vaddr); + xsc3_l2_inv_mva(vaddr); } + l2_map_restore_flags(flags); + dsb(); } static void xsc3_l2_clean_range(unsigned long start, unsigned long end) { + unsigned long vaddr, flags; + + vaddr = -1; /* to force the first mapping */ + l2_map_save_flags(flags); + start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { - xsc3_l2_clean_pa(start); + vaddr = l2_map_va(start, vaddr, flags); + xsc3_l2_clean_mva(vaddr); start += CACHE_LINE_SIZE; } + l2_map_restore_flags(flags); + dsb(); } @@ -148,18 +193,26 @@ static inline void xsc3_l2_flush_all(void) static void xsc3_l2_flush_range(unsigned long start, unsigned long end) { + unsigned long vaddr, flags; + if (start == 0 && end == -1ul) { xsc3_l2_flush_all(); return; } + vaddr = -1; /* to force the first mapping */ + l2_map_save_flags(flags); + start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { - xsc3_l2_clean_pa(start); - xsc3_l2_inv_pa(start); + vaddr = l2_map_va(start, vaddr, flags); + xsc3_l2_clean_mva(vaddr); + xsc3_l2_inv_mva(vaddr); start += CACHE_LINE_SIZE; } + l2_map_restore_flags(flags); + dsb(); } diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c new file mode 100644 index 00000000000..b2a6008b011 --- /dev/null +++ b/arch/arm/mm/copypage-fa.c @@ -0,0 +1,86 @@ +/* + * linux/arch/arm/lib/copypage-fa.S + * + * Copyright (C) 2005 Faraday Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * Based on copypage-v4wb.S: + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/highmem.h> + +/* + * Faraday optimised copy_user_page + */ +static void __naked +fa_copy_user_page(void *kto, const void *kfrom) +{ + asm("\ + stmfd sp!, {r4, lr} @ 2\n\ + mov r2, %0 @ 1\n\ +1: ldmia r1!, {r3, r4, ip, lr} @ 4\n\ + stmia r0, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add r0, r0, #16 @ 1\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4\n\ + stmia r0, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add r0, r0, #16 @ 1\n\ + subs r2, r2, #1 @ 1\n\ + bne 1b @ 1\n\ + mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB\n\ + ldmfd sp!, {r4, pc} @ 3" + : + : "I" (PAGE_SIZE / 32)); +} + +void fa_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr) +{ + void *kto, *kfrom; + + kto = kmap_atomic(to, KM_USER0); + kfrom = kmap_atomic(from, KM_USER1); + fa_copy_user_page(kto, kfrom); + kunmap_atomic(kfrom, KM_USER1); + kunmap_atomic(kto, KM_USER0); +} + +/* + * Faraday optimised clear_user_page + * + * Same story as above. + */ +void fa_clear_user_highpage(struct page *page, unsigned long vaddr) +{ + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + asm volatile("\ + mov r1, %2 @ 1\n\ + mov r2, #0 @ 1\n\ + mov r3, #0 @ 1\n\ + mov ip, #0 @ 1\n\ + mov lr, #0 @ 1\n\ +1: stmia %0, {r2, r3, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add %0, %0, #16 @ 1\n\ + stmia %0, {r2, r3, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add %0, %0, #16 @ 1\n\ + subs r1, r1, #1 @ 1\n\ + bne 1b @ 1\n\ + mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 32) + : "r1", "r2", "r3", "ip", "lr"); + kunmap_atomic(kaddr, KM_USER0); +} + +struct cpu_user_fns fa_user_fns __initdata = { + .cpu_clear_user_highpage = fa_clear_user_highpage, + .cpu_copy_user_highpage = fa_copy_user_highpage, +}; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f1ef5613ccd..510c179b0ac 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -19,6 +19,7 @@ #include <linux/dma-mapping.h> #include <asm/memory.h> +#include <asm/highmem.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/sizes.h> @@ -517,6 +518,74 @@ void dma_cache_maint(const void *start, size_t size, int direction) } EXPORT_SYMBOL(dma_cache_maint); +static void dma_cache_maint_contiguous(struct page *page, unsigned long offset, + size_t size, int direction) +{ + void *vaddr; + unsigned long paddr; + void (*inner_op)(const void *, const void *); + void (*outer_op)(unsigned long, unsigned long); + + switch (direction) { + case DMA_FROM_DEVICE: /* invalidate only */ + inner_op = dmac_inv_range; + outer_op = outer_inv_range; + break; + case DMA_TO_DEVICE: /* writeback only */ + inner_op = dmac_clean_range; + outer_op = outer_clean_range; + break; + case DMA_BIDIRECTIONAL: /* writeback and invalidate */ + inner_op = dmac_flush_range; + outer_op = outer_flush_range; + break; + default: + BUG(); + } + + if (!PageHighMem(page)) { + vaddr = page_address(page) + offset; + inner_op(vaddr, vaddr + size); + } else { + vaddr = kmap_high_get(page); + if (vaddr) { + vaddr += offset; + inner_op(vaddr, vaddr + size); + kunmap_high(page); + } + } + + paddr = page_to_phys(page) + offset; + outer_op(paddr, paddr + size); +} + +void dma_cache_maint_page(struct page *page, unsigned long offset, + size_t size, int dir) +{ + /* + * A single sg entry may refer to multiple physically contiguous + * pages. But we still need to process highmem pages individually. + * If highmem is not configured then the bulk of this loop gets + * optimized out. + */ + size_t left = size; + do { + size_t len = left; + if (PageHighMem(page) && len + offset > PAGE_SIZE) { + if (offset >= PAGE_SIZE) { + page += offset / PAGE_SIZE; + offset %= PAGE_SIZE; + } + len = PAGE_SIZE - offset; + } + dma_cache_maint_contiguous(page, offset, len, dir); + offset = 0; + page++; + left -= len; + } while (left); +} +EXPORT_SYMBOL(dma_cache_maint_page); + /** * dma_map_sg - map a set of SG buffers for streaming mode DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices @@ -614,7 +683,8 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, continue; if (!arch_is_coherent()) - dma_cache_maint(sg_virt(s), s->length, dir); + dma_cache_maint_page(sg_page(s), s->offset, + s->length, dir); } } EXPORT_SYMBOL(dma_sync_sg_for_device); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 0fa9bf388f0..4e283481cee 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -192,7 +192,7 @@ void flush_dcache_page(struct page *page) struct address_space *mapping = page_mapping(page); #ifndef CONFIG_SMP - if (mapping && !mapping_mapped(mapping)) + if (!PageHighMem(page) && mapping && !mapping_mapped(mapping)) set_bit(PG_dcache_dirty, &page->flags); else #endif diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c new file mode 100644 index 00000000000..a34954d9df7 --- /dev/null +++ b/arch/arm/mm/highmem.c @@ -0,0 +1,116 @@ +/* + * arch/arm/mm/highmem.c -- ARM highmem support + * + * Author: Nicolas Pitre + * Created: september 8, 2008 + * Copyright: Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/highmem.h> +#include <linux/interrupt.h> +#include <asm/fixmap.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include "mm.h" + +void *kmap(struct page *page) +{ + might_sleep(); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} +EXPORT_SYMBOL(kmap); + +void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} +EXPORT_SYMBOL(kunmap); + +void *kmap_atomic(struct page *page, enum km_type type) +{ + unsigned int idx; + unsigned long vaddr; + + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + idx = type + KM_TYPE_NR * smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#ifdef CONFIG_DEBUG_HIGHMEM + /* + * With debugging enabled, kunmap_atomic forces that entry to 0. + * Make sure it was indeed properly unmapped. + */ + BUG_ON(!pte_none(*(TOP_PTE(vaddr)))); +#endif + set_pte_ext(TOP_PTE(vaddr), mk_pte(page, kmap_prot), 0); + /* + * When debugging is off, kunmap_atomic leaves the previous mapping + * in place, so this TLB flush ensures the TLB is updated with the + * new mapping. + */ + local_flush_tlb_kernel_page(vaddr); + + return (void *)vaddr; +} +EXPORT_SYMBOL(kmap_atomic); + +void kunmap_atomic(void *kvaddr, enum km_type type) +{ + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + unsigned int idx = type + KM_TYPE_NR * smp_processor_id(); + + if (kvaddr >= (void *)FIXADDR_START) { + __cpuc_flush_dcache_page((void *)vaddr); +#ifdef CONFIG_DEBUG_HIGHMEM + BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); + set_pte_ext(TOP_PTE(vaddr), __pte(0), 0); + local_flush_tlb_kernel_page(vaddr); +#else + (void) idx; /* to kill a warning */ +#endif + } + pagefault_enable(); +} +EXPORT_SYMBOL(kunmap_atomic); + +void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) +{ + unsigned int idx; + unsigned long vaddr; + + pagefault_disable(); + + idx = type + KM_TYPE_NR * smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#ifdef CONFIG_DEBUG_HIGHMEM + BUG_ON(!pte_none(*(TOP_PTE(vaddr)))); +#endif + set_pte_ext(TOP_PTE(vaddr), pfn_pte(pfn, kmap_prot), 0); + local_flush_tlb_kernel_page(vaddr); + + return (void *)vaddr; +} + +struct page *kmap_atomic_to_page(const void *ptr) +{ + unsigned long vaddr = (unsigned long)ptr; + pte_t *pte; + + if (vaddr < FIXADDR_START) + return virt_to_page(ptr); + + pte = TOP_PTE(vaddr); + return pte_page(*pte); +} diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 80fd3b69ae1..8277802ec85 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,6 +15,7 @@ #include <linux/mman.h> #include <linux/nodemask.h> #include <linux/initrd.h> +#include <linux/highmem.h> #include <asm/mach-types.h> #include <asm/sections.h> @@ -485,7 +486,7 @@ void __init mem_init(void) int i, node; #ifndef CONFIG_DISCONTIGMEM - max_mapnr = virt_to_page(high_memory) - mem_map; + max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map; #endif /* this will put all unused low memory onto the freelists */ @@ -504,6 +505,19 @@ void __init mem_init(void) __phys_to_pfn(__pa(swapper_pg_dir)), NULL); #endif +#ifdef CONFIG_HIGHMEM + /* set highmem page free */ + for_each_online_node(node) { + for_each_nodebank (i, &meminfo, node) { + unsigned long start = bank_pfn_start(&meminfo.bank[i]); + unsigned long end = bank_pfn_end(&meminfo.bank[i]); + if (start >= max_low_pfn + PHYS_PFN_OFFSET) + totalhigh_pages += free_area(start, end, NULL); + } + } + totalram_pages += totalhigh_pages; +#endif + /* * Since our memory may not be contiguous, calculate the * real number of pages we have in this system @@ -521,9 +535,10 @@ void __init mem_init(void) initsize = __init_end - __init_begin; printk(KERN_NOTICE "Memory: %luKB available (%dK code, " - "%dK data, %dK init)\n", + "%dK data, %dK init, %luK highmem)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), - codesize >> 10, datasize >> 10, initsize >> 10); + codesize >> 10, datasize >> 10, initsize >> 10, + (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); if (PAGE_SIZE >= 16384 && num_physpages <= 128) { extern int sysctl_overcommit_memory; diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 95bbe112965..c4f6f05198e 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -1,7 +1,6 @@ -/* the upper-most page table pointer */ - #ifdef CONFIG_MMU +/* the upper-most page table pointer */ extern pmd_t *top_pmd; #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index d4d082c5c2d..b438fc4fb77 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -18,9 +18,11 @@ #include <asm/cputype.h> #include <asm/mach-types.h> #include <asm/sections.h> +#include <asm/cachetype.h> #include <asm/setup.h> #include <asm/sizes.h> #include <asm/tlb.h> +#include <asm/highmem.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -243,6 +245,10 @@ static struct mem_type mem_types[] = { .prot_sect = PMD_TYPE_SECT, .domain = DOMAIN_KERNEL, }, + [MT_MEMORY_NONCACHED] = { + .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, + .domain = DOMAIN_KERNEL, + }, }; const struct mem_type *get_mem_type(unsigned int type) @@ -406,9 +412,28 @@ static void __init build_mem_type_table(void) kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; #endif } + /* + * Non-cacheable Normal - intended for memory areas that must + * not cause dirty cache line writebacks when used + */ + if (cpu_arch >= CPU_ARCH_ARMv6) { + if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) { + /* Non-cacheable Normal is XCB = 001 */ + mem_types[MT_MEMORY_NONCACHED].prot_sect |= + PMD_SECT_BUFFERED; + } else { + /* For both ARMv6 and non-TEX-remapping ARMv7 */ + mem_types[MT_MEMORY_NONCACHED].prot_sect |= + PMD_SECT_TEX(1); + } + } else { + mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE; + } + for (i = 0; i < 16; i++) { unsigned long v = pgprot_val(protection_map[i]); protection_map[i] = __pgprot(v | user_pgprot); @@ -677,6 +702,10 @@ static void __init sanity_check_meminfo(void) if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " "ignoring high memory\n"); + } else if (cache_is_vipt_aliasing()) { + printk(KERN_CRIT "HIGHMEM is not yet supported " + "with VIPT aliasing cache, " + "ignoring high memory\n"); } else { memmove(bank + 1, bank, (meminfo.nr_banks - i) * sizeof(*bank)); @@ -694,7 +723,7 @@ static void __init sanity_check_meminfo(void) * the vmalloc area. */ if (__va(bank->start) >= VMALLOC_MIN || - __va(bank->start) < PAGE_OFFSET) { + __va(bank->start) < (void *)PAGE_OFFSET) { printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " "(vmalloc region overlap).\n", bank->start, bank->start + bank->size - 1); @@ -895,6 +924,17 @@ static void __init devicemaps_init(struct machine_desc *mdesc) flush_cache_all(); } +static void __init kmap_init(void) +{ +#ifdef CONFIG_HIGHMEM + pmd_t *pmd = pmd_off_k(PKMAP_BASE); + pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t)); + BUG_ON(!pmd_none(*pmd) || !pte); + __pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE); + pkmap_page_table = pte + PTRS_PER_PTE; +#endif +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. @@ -908,6 +948,7 @@ void __init paging_init(struct machine_desc *mdesc) prepare_page_table(); bootmem_init(); devicemaps_init(mdesc); + kmap_init(); top_pmd = pmd_off_k(0xffff0000); diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S new file mode 100644 index 00000000000..08b8a955d5d --- /dev/null +++ b/arch/arm/mm/proc-fa526.S @@ -0,0 +1,248 @@ +/* + * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526 + * + * Written by : Luke Lee + * Copyright (C) 2005 Faraday Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * These are the low level assembler for performing cache and TLB + * functions on the fa526. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/hwcap.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/ptrace.h> +#include <asm/system.h> + +#include "proc-macros.S" + +#define CACHE_DLINESIZE 16 + + .text +/* + * cpu_fa526_proc_init() + */ +ENTRY(cpu_fa526_proc_init) + mov pc, lr + +/* + * cpu_fa526_proc_fin() + */ +ENTRY(cpu_fa526_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl fa_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x000e @ ............wca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + nop + nop + ldmfd sp!, {pc} + +/* + * cpu_fa526_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 4 +ENTRY(cpu_fa526_reset) +/* TODO: Use CP8 if possible... */ + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches + mcr p15, 0, ip, c7, c10, 4 @ drain WB +#ifdef CONFIG_MMU + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs +#endif + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x000f @ ............wcam + bic ip, ip, #0x1100 @ ...i...s........ + bic ip, ip, #0x0800 @ BTB off + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + nop + nop + mov pc, r0 + +/* + * cpu_fa526_do_idle() + */ + .align 4 +ENTRY(cpu_fa526_do_idle) + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mov pc, lr + + +ENTRY(cpu_fa526_dcache_clean_area) +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_fa526_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 4 +ENTRY(cpu_fa526_switch_mm) +#ifdef CONFIG_MMU + mov ip, #0 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache +#else + mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache +#endif + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed + mcr p15, 0, ip, c7, c10, 4 @ data write barrier + mcr p15, 0, ip, c7, c5, 4 @ prefetch flush + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB +#endif + mov pc, lr + +/* + * cpu_fa526_set_pte_ext(ptep, pte, ext) + * + * Set a PTE and flush it out + */ + .align 4 +ENTRY(cpu_fa526_set_pte_ext) +#ifdef CONFIG_MMU + armv3_set_pte_ext + mov r0, r0 + mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain WB +#endif + mov pc, lr + + __INIT + + .type __fa526_setup, #function +__fa526_setup: + /* On return of this routine, r0 must carry correct flags for CFG register */ + mov r0, #0 + mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 +#ifdef CONFIG_MMU + mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 +#endif + mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM + + mov r0, #1 + mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c5, 4 @ prefetch flush + + mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client + mcr p15, 0, r0, c3, c0 @ load domain access register + + mrc p15, 0, r0, c1, c0 @ get control register v4 + ldr r5, fa526_cr1_clear + bic r0, r0, r5 + ldr r5, fa526_cr1_set + orr r0, r0, r5 + mov pc, lr + .size __fa526_setup, . - __fa526_setup + + /* + * .RVI ZFRS BLDP WCAM + * ..11 1001 .111 1101 + * + */ + .type fa526_cr1_clear, #object + .type fa526_cr1_set, #object +fa526_cr1_clear: + .word 0x3f3f +fa526_cr1_set: + .word 0x397D + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type fa526_processor_functions, #object +fa526_processor_functions: + .word v4_early_abort + .word pabort_noifar + .word cpu_fa526_proc_init + .word cpu_fa526_proc_fin + .word cpu_fa526_reset + .word cpu_fa526_do_idle + .word cpu_fa526_dcache_clean_area + .word cpu_fa526_switch_mm + .word cpu_fa526_set_pte_ext + .size fa526_processor_functions, . - fa526_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv4" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v4" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_fa526_name, #object +cpu_fa526_name: + .asciz "FA526" + .size cpu_fa526_name, . - cpu_fa526_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __fa526_proc_info,#object +__fa526_proc_info: + .long 0x66015261 + .long 0xff01fff1 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __fa526_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_HALF + .long cpu_fa526_name + .long fa526_processor_functions + .long fa_tlb_fns + .long fa_user_fns + .long fa_cache_fns + .size __fa526_proc_info, . - __fa526_proc_info diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S new file mode 100644 index 00000000000..540f5078496 --- /dev/null +++ b/arch/arm/mm/proc-mohawk.S @@ -0,0 +1,416 @@ +/* + * linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core + * + * PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core. + * + * Heavily based on proc-arm926.S and proc-xsc3.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/hwcap.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/ptrace.h> +#include "proc-macros.S" + +/* + * This is the maximum size of an area which will be flushed. If the + * area is larger than this, then we flush the whole cache. + */ +#define CACHE_DLIMIT 32768 + +/* + * The cache line size of the L1 D cache. + */ +#define CACHE_DLINESIZE 32 + +/* + * cpu_mohawk_proc_init() + */ +ENTRY(cpu_mohawk_proc_init) + mov pc, lr + +/* + * cpu_mohawk_proc_fin() + */ +ENTRY(cpu_mohawk_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl mohawk_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1800 @ ...iz........... + bic r0, r0, #0x0006 @ .............ca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_mohawk_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + * + * (same as arm926) + */ + .align 5 +ENTRY(cpu_mohawk_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x0007 @ .............cam + bic ip, ip, #0x1100 @ ...i...s........ + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_mohawk_do_idle() + * + * Called with IRQs disabled + */ + .align 5 +ENTRY(cpu_mohawk_do_idle) + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt + mov pc, lr + +/* + * flush_user_cache_all() + * + * Clean and invalidate all cache entries in a particular + * address space. + */ +ENTRY(mohawk_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(mohawk_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: + mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer + mov pc, lr + +/* + * flush_user_cache_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address range. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags describing address space + * + * (same as arm926) + */ +ENTRY(mohawk_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #CACHE_DLIMIT + bgt __flush_whole_cache +1: tst r2, #VM_EXEC + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(mohawk_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as arm926) + */ +ENTRY(mohawk_coherent_user_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(mohawk_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(mohawk_dma_inv_range) + tst r0, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean D entry + tst r1, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean D entry + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(mohawk_dma_clean_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(mohawk_dma_flush_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: + mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(mohawk_cache_fns) + .long mohawk_flush_kern_cache_all + .long mohawk_flush_user_cache_all + .long mohawk_flush_user_cache_range + .long mohawk_coherent_kern_range + .long mohawk_coherent_user_range + .long mohawk_flush_kern_dcache_page + .long mohawk_dma_inv_range + .long mohawk_dma_clean_range + .long mohawk_dma_flush_range + +ENTRY(cpu_mohawk_dcache_clean_area) +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * cpu_mohawk_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_mohawk_switch_mm) + mov ip, #0 + mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + orr r0, r0, #0x18 @ cache the page table in L2 + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mov pc, lr + +/* + * cpu_mohawk_set_pte_ext(ptep, pte, ext) + * + * Set a PTE and flush it out + */ + .align 5 +ENTRY(cpu_mohawk_set_pte_ext) + armv3_set_pte_ext + mov r0, r0 + mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + + __INIT + + .type __mohawk_setup, #function +__mohawk_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c7 @ invalidate I,D caches + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs + orr r4, r4, #0x18 @ cache the page table in L2 + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer + + mov r0, #0 @ don't allow CP access + mcr p15, 0, r0, c15, c1, 0 @ write CP access register + + adr r5, mohawk_crval + ldmia r5, {r5, r6} + mrc p15, 0, r0, c1, c0 @ get control register + bic r0, r0, r5 + orr r0, r0, r6 + mov pc, lr + + .size __mohawk_setup, . - __mohawk_setup + + /* + * R + * .RVI ZFRS BLDP WCAM + * .011 1001 ..00 0101 + * + */ + .type mohawk_crval, #object +mohawk_crval: + crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134 + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type mohawk_processor_functions, #object +mohawk_processor_functions: + .word v5t_early_abort + .word pabort_noifar + .word cpu_mohawk_proc_init + .word cpu_mohawk_proc_fin + .word cpu_mohawk_reset + .word cpu_mohawk_do_idle + .word cpu_mohawk_dcache_clean_area + .word cpu_mohawk_switch_mm + .word cpu_mohawk_set_pte_ext + .size mohawk_processor_functions, . - mohawk_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_mohawk_name, #object +cpu_mohawk_name: + .asciz "Marvell 88SV331x" + .size cpu_mohawk_name, . - cpu_mohawk_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __88sv331x_proc_info,#object +__88sv331x_proc_info: + .long 0x56158000 @ Marvell 88SV331x (MOHAWK) + .long 0xfffff000 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __mohawk_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_mohawk_name + .long mohawk_processor_functions + .long v4wbi_tlb_fns + .long v4wb_user_fns + .long mohawk_cache_fns + .size __88sv331x_proc_info, . - __88sv331x_proc_info diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S new file mode 100644 index 00000000000..9694f1f6f48 --- /dev/null +++ b/arch/arm/mm/tlb-fa.S @@ -0,0 +1,75 @@ +/* + * linux/arch/arm/mm/tlb-fa.S + * + * Copyright (C) 2005 Faraday Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * Based on tlb-v4wbi.S: + * Copyright (C) 1997-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ARM architecture version 4, Faraday variation. + * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB) + * + * Processors: FA520 FA526 FA626 + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/asm-offsets.h> +#include <asm/tlbflush.h> +#include "proc-macros.S" + + +/* + * flush_user_tlb_range(start, end, mm) + * + * Invalidate a range of TLB entries in the specified address space. + * + * - start - range start address + * - end - range end address + * - mm - mm_struct describing address space + */ + .align 4 +ENTRY(fa_flush_user_tlb_range) + vma_vm_mm ip, r2 + act_mm r3 @ get current->active_mm + eors r3, ip, r3 @ == mm ? + movne pc, lr @ no, we dont do anything + mov r3, #0 + mcr p15, 0, r3, c7, c10, 4 @ drain WB + bic r0, r0, #0x0ff + bic r0, r0, #0xf00 +1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry + add r0, r0, #PAGE_SZ + cmp r0, r1 + blo 1b + mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB + mcr p15, 0, r3, c7, c10, 4 @ data write barrier + mov pc, lr + + +ENTRY(fa_flush_kern_tlb_range) + mov r3, #0 + mcr p15, 0, r3, c7, c10, 4 @ drain WB + bic r0, r0, #0x0ff + bic r0, r0, #0xf00 +1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry + add r0, r0, #PAGE_SZ + cmp r0, r1 + blo 1b + mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB + mcr p15, 0, r3, c7, c10, 4 @ data write barrier + mcr p15, 0, r3, c7, c5, 4 @ prefetch flush + mov pc, lr + + __INITDATA + + .type fa_tlb_fns, #object +ENTRY(fa_tlb_fns) + .long fa_flush_user_tlb_range + .long fa_flush_kern_tlb_range + .long fa_tlb_flags + .size fa_tlb_fns, . - fa_tlb_fns diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c index cefc21c2eee..d805a52b503 100644 --- a/arch/arm/oprofile/backtrace.c +++ b/arch/arm/oprofile/backtrace.c @@ -18,15 +18,14 @@ #include <linux/mm.h> #include <linux/uaccess.h> #include <asm/ptrace.h> - -#include "../kernel/stacktrace.h" +#include <asm/stacktrace.h> static int report_trace(struct stackframe *frame, void *d) { unsigned int *depth = d; if (*depth) { - oprofile_add_trace(frame->lr); + oprofile_add_trace(frame->pc); (*depth)--; } @@ -70,9 +69,12 @@ void arm_backtrace(struct pt_regs * const regs, unsigned int depth) struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1; if (!user_mode(regs)) { - unsigned long base = ((unsigned long)regs) & ~(THREAD_SIZE - 1); - walk_stackframe(regs->ARM_fp, base, base + THREAD_SIZE, - report_trace, &depth); + struct stackframe frame; + frame.fp = regs->ARM_fp; + frame.sp = regs->ARM_sp; + frame.lr = regs->ARM_lr; + frame.pc = regs->ARM_pc; + walk_stackframe(&frame, report_trace, &depth); return; } diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c index 6d6bd589924..853d42bb868 100644 --- a/arch/arm/oprofile/op_model_mpcore.c +++ b/arch/arm/oprofile/op_model_mpcore.c @@ -263,7 +263,7 @@ static void em_route_irq(int irq, unsigned int cpu) const struct cpumask *mask = cpumask_of(cpu); spin_lock_irq(&desc->lock); - desc->affinity = *mask; + cpumask_copy(desc->affinity, mask); desc->chip->set_affinity(irq, mask); spin_unlock_irq(&desc->lock); } diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 9cc2b16fdf7..17d0e9906d5 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -3,7 +3,7 @@ if ARCH_MXC menu "Freescale MXC Implementations" choice - prompt "MXC/iMX Base Type" + prompt "Freescale CPU family:" default ARCH_MX3 config ARCH_MX1 @@ -15,12 +15,14 @@ config ARCH_MX1 config ARCH_MX2 bool "MX2-based" select CPU_ARM926T + select COMMON_CLKDEV help This enables support for systems based on the Freescale i.MX2 family config ARCH_MX3 bool "MX3-based" select CPU_V6 + select COMMON_CLKDEV help This enables support for systems based on the Freescale i.MX3 family @@ -43,4 +45,10 @@ config MXC_IRQ_PRIOR requirements for timing. Say N here, unless you have a specialized requirement. +config MXC_PWM + tristate "Enable PWM driver" + depends on ARCH_MXC + help + Enable support for the i.MX PWM controller(s). + endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index db74a929179..055406312b6 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := irq.o clock.o gpio.o time.o devices.o +obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o +obj-$(CONFIG_MXC_PWM) += pwm.o diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 0a38f0b396e..92e13566cd4 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -48,6 +48,11 @@ static DEFINE_MUTEX(clocks_mutex); *-------------------------------------------------------------------------*/ /* + * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all + * MXC architectures have switched to using clkdev. + */ +#ifndef CONFIG_COMMON_CLKDEV +/* * Retrieve a clock by name. * * Note that we first try to use device id on the bus @@ -110,6 +115,7 @@ found: return clk; } EXPORT_SYMBOL(clk_get); +#endif static void __clk_disable(struct clk *clk) { @@ -187,6 +193,7 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); +#ifndef CONFIG_COMMON_CLKDEV /* Decrement the clock's module reference count */ void clk_put(struct clk *clk) { @@ -194,6 +201,7 @@ void clk_put(struct clk *clk) module_put(clk->owner); } EXPORT_SYMBOL(clk_put); +#endif /* Round the requested clock rate to the nearest supported * rate that is less than or equal to the requested rate. @@ -257,6 +265,7 @@ struct clk *clk_get_parent(struct clk *clk) } EXPORT_SYMBOL(clk_get_parent); +#ifndef CONFIG_COMMON_CLKDEV /* * Add a new clock to the clock tree. */ @@ -327,4 +336,49 @@ static int __init mxc_setup_proc_entry(void) } late_initcall(mxc_setup_proc_entry); +#endif /* CONFIG_PROC_FS */ +#endif + +/* + * Get the resulting clock rate from a PLL register value and the input + * frequency. PLLs with this register layout can at least be found on + * MX1, MX21, MX27 and MX31 + * + * mfi + mfn / (mfd + 1) + * f = 2 * f_ref * -------------------- + * pd + 1 + */ +unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq) +{ + long long ll; + int mfn_abs; + unsigned int mfi, mfn, mfd, pd; + + mfi = (reg_val >> 10) & 0xf; + mfn = reg_val & 0x3ff; + mfd = (reg_val >> 16) & 0x3ff; + pd = (reg_val >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + + mfn_abs = mfn; + +#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21 + if (mfn >= 0x200) { + mfn |= 0xFFFFFE00; + mfn_abs = -mfn; + } #endif + + freq *= 2; + freq /= pd + 1; + + ll = (unsigned long long)freq * mfn_abs; + + do_div(ll, mfd + 1); + if (mfn < 0) + ll = -ll; + ll = (freq * mfi) + ll; + + return ll; +} diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c new file mode 100644 index 00000000000..386e0d52cf5 --- /dev/null +++ b/arch/arm/plat-mxc/cpu.c @@ -0,0 +1,11 @@ + +#include <linux/module.h> + +unsigned int __mxc_cpu_type; +EXPORT_SYMBOL(__mxc_cpu_type); + +void mxc_set_cpu_type(unsigned int type) +{ + __mxc_cpu_type = type; +} + diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index c66748267c4..56f2fb5cc45 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <mach/common.h> int __init mxc_register_device(struct platform_device *pdev, void *data) { diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index 2905ec75875..e364a5ed10f 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -113,7 +113,7 @@ struct imx_dma_channel { void (*err_handler) (int, void *, int errcode); void (*prog_handler) (int, void *, struct scatterlist *); void *data; - unsigned int dma_mode; + unsigned int dma_mode; struct scatterlist *sg; unsigned int resbytes; int dma_num; @@ -802,7 +802,7 @@ static int __init imx_dma_init(void) int ret = 0; int i; - dma_clk = clk_get(NULL, "dma_clk"); + dma_clk = clk_get(NULL, "dma"); clk_enable(dma_clk); /* reset DMA module */ diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index ccbd94adc66..c6483bad8a2 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -200,8 +200,8 @@ static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) static int mxc_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { - _set_gpio_direction(chip, offset, 1); mxc_gpio_set(chip, offset, value); + _set_gpio_direction(chip, offset, 1); return 0; } diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 8f34a05afc8..1cac9d1135c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -48,7 +48,8 @@ * Base address of PBC controller, CS4 */ #define PBC_BASE_ADDRESS 0xEB000000 -#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset)) +#define PBC_REG_ADDR(offset) (void __force __iomem *) \ + (PBC_BASE_ADDRESS + (offset)) /* * PBC Interupt name definitions diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 451d510d08c..318c72ada13 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ +#include <mach/hardware.h> + /* Base address of PBC controller */ #define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) /* Offsets for the PBC Controller register */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h new file mode 100644 index 00000000000..f8aef1babb7 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ +#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) + +#ifndef __ASSEMBLY__ + +enum mx31moboard_boards { + MX31NOBOARD = 0, + MX31DEVBOARD = 1, + MX31MARXBOT = 2, +}; + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + */ + +extern void mx31moboard_devboard_init(void); +extern void mx31moboard_marxbot_init(void); + +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h new file mode 100644 index 00000000000..4ff762dd45c --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-qong.h @@ -0,0 +1,22 @@ +/* + * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ +#define __ASM_ARCH_MXC_BOARD_QONG_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +/* NOR FLASH */ +#define QONG_NOR_SIZE (128*1024*1024) + +#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/clkdev.h b/arch/arm/plat-mxc/include/mach/clkdev.h new file mode 100644 index 00000000000..04b37a89801 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h index d21f78e7881..43a82d0c534 100644 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ b/arch/arm/plat-mxc/include/mach/clock.h @@ -26,9 +26,13 @@ struct module; struct clk { +#ifndef CONFIG_COMMON_CLKDEV + /* As soon as i.MX1 and i.MX31 switched to clkdev, this + * block can go away */ struct list_head node; struct module *owner; const char *name; +#endif int id; /* Source clock this clk depends on */ struct clk *parent; @@ -63,5 +67,7 @@ struct clk { int clk_register(struct clk *clk); void clk_unregister(struct clk *clk); +unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref); + #endif /* __ASSEMBLY__ */ #endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 6350287a59b..b2f9b72644d 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -12,12 +12,18 @@ #define __ASM_ARCH_MXC_COMMON_H__ struct platform_device; +struct clk; extern void mxc_map_io(void); extern void mxc_init_irq(void); -extern void mxc_timer_init(const char *clk_timer); -extern int mxc_clocks_init(unsigned long fref); +extern void mxc_timer_init(struct clk *timer_clk); +extern int mx1_clocks_init(unsigned long fref); +extern int mx21_clocks_init(unsigned long lref, unsigned long fref); +extern int mx27_clocks_init(unsigned long fref); +extern int mx31_clocks_init(unsigned long fref); +extern int mx35_clocks_init(void); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); +extern void mxc_set_cpu_type(unsigned int type); #endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 602768b427e..4f773148bc2 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -31,6 +31,9 @@ #ifdef CONFIG_MACH_MX31_3DS #include <mach/board-mx31pdk.h> #endif +#ifdef CONFIG_MACH_QONG +#include <mach/board-qong.h> +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index a612d8bb73c..42e4ee37ca1 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -23,10 +23,16 @@ #include <asm/sizes.h> #ifdef CONFIG_ARCH_MX3 -# include <mach/mx31.h> +#include <mach/mx3x.h> +#include <mach/mx31.h> +#include <mach/mx35.h> #endif #ifdef CONFIG_ARCH_MX2 +# include <mach/mx2x.h> +# ifdef CONFIG_MACH_MX21 +# include <mach/mx21.h> +# endif # ifdef CONFIG_MACH_MX27 # include <mach/mx27.h> # endif diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h index 870d0d93961..762a7b0430e 100644 --- a/arch/arm/mach-imx/include/mach/imxfb.h +++ b/arch/arm/plat-mxc/include/mach/imxfb.h @@ -76,6 +76,9 @@ struct imx_fb_platform_data { u_char * fixed_screen_cpu; dma_addr_t fixed_screen_dma; + int (*init)(struct platform_device*); + int (*exit)(struct platform_device*); + void (*lcd_power)(int); void (*backlight_power)(int); }; diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h deleted file mode 100644 index 95a383be628..00000000000 --- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h +++ /dev/null @@ -1,416 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef _MXC_GPIO_MX1_MX2_H -#define _MXC_GPIO_MX1_MX2_H - -#include <linux/io.h> - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#ifdef CONFIG_ARCH_MX1 -# define GPIO_PORT_MAX 3 -#endif -#ifdef CONFIG_ARCH_MX2 -# define GPIO_PORT_MAX 5 -#endif - -#ifndef GPIO_PORT_MAX -# error "GPIO config port count unknown!" -#endif - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) - -extern void mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); - -/*-------------------------------------------------------------------------*/ - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#ifdef CONFIG_ARCH_MX1 -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_IN | GPIO_AF | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) -#endif - -#ifdef CONFIG_ARCH_MX2 -#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) -#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) -#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31) -#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) -#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) -#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) -#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) -#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) -#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21) -#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USB_OC_B (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBH1_OE_B (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) -#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) -#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) -#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6) -#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 7) -#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 8) -#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) -#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 10) -#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) -#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 12) -#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 13) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13) -#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) -#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) -#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) -#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) -#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) -#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23) -#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_OUT | GPIO_PF | 0) -#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_OUT | GPIO_PF | 1) -#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_OUT | GPIO_PF | 2) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) -#define PE16_AF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 16) -#define PE16_PF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 16) -#define PE18_PF_SDHC1_D0 (GPIO_PORTE | GPIO_PF | 18) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18) -#define PE19_PF_SDHC1_D1 (GPIO_PORTE | GPIO_PF | 19) -#define PE20_PF_SDHC1_D2 (GPIO_PORTE | GPIO_PF | 20) -#define PE21_PF_SDHC1_D3 (GPIO_PORTE | GPIO_PF | 21) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21) -#define PE22_PF_SDHC1_CMD (GPIO_PORTE | GPIO_PF | 22) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22) -#define PE22_PF_SDHC1_CLK (GPIO_PORTE | GPIO_PF | 23) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23) -#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 24) -#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_OUT | GPIO_PF | 25) -#endif - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - -#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) -#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) - -#endif /* _MXC_GPIO_MX1_MX2_H */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h new file mode 100644 index 00000000000..bf23305c19c --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h @@ -0,0 +1,166 @@ +/* +* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301, USA. +*/ + +#ifndef _MXC_IOMUX_MX1_H +#define _MXC_IOMUX_MX1_H + +#ifndef GPIO_PORTA +#error Please include mach/iomux.h +#endif + +/* FIXME: This list is not completed. The correct directions are +* missing on some (many) pins +*/ + + +/* Primary GPIO pin functions */ + +#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) +#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) +#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) +#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) +#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) +#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) +#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) +#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) +#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) +#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) +#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) +#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) +#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) +#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) +#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) +#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) +#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) +#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) +#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) +#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) +#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) +#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) +#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) +#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) +#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) +#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) +#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) +#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) +#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) +#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) +#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) +#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) +#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) +#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) +#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) +#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) +#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) +#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) +#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) +#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) +#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) +#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) +#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) +#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) +#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) +#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) +#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) +#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) +#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) +#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) +#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) +#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) +#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) +#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) +#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) +#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) +#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) +#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) +#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) +#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) +#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) +#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) +#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) +#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) +#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) +#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) +#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) +#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) +#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) +#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) +#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) +#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) +#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) +#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) +#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) +#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) +#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) +#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) +#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) +#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) +#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) +#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) +#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) +#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) +#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) +#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) +#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) +#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) +#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) +#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) +#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) +#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) +#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) +#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) +#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) +#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) +#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) +#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) +#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) +#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) +#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) +#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) +#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) +#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) +#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) + + +#endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h new file mode 100644 index 00000000000..63aaa972e27 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h @@ -0,0 +1,126 @@ +/* +* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301, USA. +*/ + +#ifndef _MXC_IOMUX_MX21_H +#define _MXC_IOMUX_MX21_H + +#ifndef GPIO_PORTA +#error Please include mach/iomux.h +#endif + + +/* Primary GPIO pin functions */ + +#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) +#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) +#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) +#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) +#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) +#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) +#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) +#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) +#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) +#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) +#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) +#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) +#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) +#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) + +/* Alternate GPIO pin functions */ + +#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) +#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) +#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) +#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) +#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) +#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) +#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) +#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) +#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) +#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) +#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) +#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) +#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) +#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) +#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) +#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) +#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) +#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) + +/* AIN GPIO pin functions */ + +#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) +#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) +#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) +#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) +#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) +#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) +#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) +#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) +#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) +#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) +#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) + +/* BIN GPIO pin functions */ + +#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) + +/* CIN GPIO pin functions */ + +#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) + +/* AOUT GPIO pin functions */ + +#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) +#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) +#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) +#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) +#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) +#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) +#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) +#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) +#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) +#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) +#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) +#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) +#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) +#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) +#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) + + +#endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h new file mode 100644 index 00000000000..5ac158b70f6 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h @@ -0,0 +1,207 @@ +/* +* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> +* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301, USA. +*/ + +#ifndef _MXC_IOMUX_MX27_H +#define _MXC_IOMUX_MX27_H + +#ifndef GPIO_PORTA +#error Please include mach/iomux.h +#endif + + +/* Primary GPIO pin functions */ + +#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) +#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) +#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) +#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) +#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) +#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) +#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) +#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) +#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) +#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) +#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) +#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) +#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) +#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) +#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) +#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) +#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) +#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) +#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) +#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) +#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) +#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) +#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) +#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) +#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) +#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) +#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) +#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) +#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) +#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) +#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) +#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) +#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) +#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) +#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) +#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) +#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) +#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) +#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) +#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) +#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) +#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) +#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) + +/* Alternate GPIO pin functions */ + +#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) +#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) +#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) +#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) +#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) +#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) +#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) +#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) +#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) +#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) +#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) +#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) +#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) +#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) +#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) +#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) +#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) +#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) +#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) +#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) +#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) +#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) +#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) +#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) +#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) +#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) +#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) +#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) +#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) +#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) +#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) +#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) +#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) +#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) +#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) +#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) +#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) +#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) +#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) +#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) +#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) +#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) +#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) +#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) +#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) +#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) +#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) +#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) +#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) +#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) +#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) +#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) + +/* AIN GPIO pin functions */ + +#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) +#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) +#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) +#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) +#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) +#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) +#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) +#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) +#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) + +/* BIN GPIO pin functions */ + +#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) + +/* CIN GPIO pin functions */ + +#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) +#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) +#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) +#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) +#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) +#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) +#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) +#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) +#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) +#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) +#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) +#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) +#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) +#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) +#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) +#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) +#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) +/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */ + +/* AOUT GPIO pin functions */ + +#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) +#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) +#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) +#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) +#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) +#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) +#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) +#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) +#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) +#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) +#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) + +#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) +#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) +#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) +#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) +#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) +#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) +#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) + + +#endif /* _MXC_GPIO_MX1_MX2_H */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h new file mode 100644 index 00000000000..fb5ae638e79 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h @@ -0,0 +1,237 @@ +/* +* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> +* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301, USA. +*/ + +#ifndef _MXC_IOMUX_MX2x_H +#define _MXC_IOMUX_MX2x_H + +#ifndef GPIO_PORTA +#error Please include mach/iomux.h +#endif + + +/* Primary GPIO pin functions */ + +#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) +#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) +#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) +#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) +#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) +#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) +#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) +#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) +#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) +#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) +#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) +#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) +#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) +#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) +#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) +#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) +#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) +#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) +#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) +#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) +#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) +#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) +#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) +#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) +#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) +#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) +#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) +#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) +#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) +#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) +#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) +#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) +#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) +#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) +#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) +#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) +#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) +#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) +#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) +#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) +#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) +#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) +#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) +#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) +#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) +#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) +#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) +#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) +#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) +#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) +#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) +#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) +#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) +#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) +#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) +#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) +#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) +#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) +#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) +#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) +#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) +#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) +#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) +#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) +#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) +#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) +#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) +#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) +#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) +#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) +#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) +#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) +#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) +#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) +#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) +#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) +#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) +#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) +#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) +#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) +#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) +#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) +#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) +#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) +#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) +#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) +#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) +#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) +#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) +#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) +#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) +#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) +#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) +#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) +#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) +#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) +#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) +#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) + +/* Alternate GPIO pin functions */ + +#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) +#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) +#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) +#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) +#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) +#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) +#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) +#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) +#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) +#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) +#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) +#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) +#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) +#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) +#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) +#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) +#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) +#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) +#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) +#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) +#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) +#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) +#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) +#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) +#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) +#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) +#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) + +/* AIN GPIO pin functions */ + +#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) +#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) +#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) +#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) +#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) +#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) +#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) +#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) +#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) +#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) +#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) +#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) +#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) +#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) +#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) +#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) +#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) +#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) +#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) +#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) +#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) +#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) +#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) +#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) +#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) +#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) +#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) +#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) +#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) +#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) +#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) +#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) +#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) +#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) + +/* BIN GPIO pin functions */ + +#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) + +/* CIN GPIO pin functions */ + +#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) +#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) +#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) +#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) +#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) +#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) +#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) +#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) +#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) +#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) + +/* AOUT GPIO pin functions */ + +#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) +#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) +#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8) +#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) +#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) + + +#endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index c9198c0aea1..ab838cfe94f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -92,7 +92,7 @@ enum iomux_gp_func { MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, MUX_TAMPER_DETECT_EN = 1 << 16, MUX_PGP_USB_4WIRE = 1 << 17, - MUX_PGB_USB_COMMON = 1 << 18, + MUX_PGP_USB_COMMON = 1 << 18, MUX_SDHC_MEMSTICK1 = 1 << 19, MUX_SDHC_MEMSTICK2 = 1 << 20, MUX_PGP_SPLL_BYP = 1 << 21, @@ -109,21 +109,44 @@ enum iomux_gp_func { }; /* - * This function enables/disables the general purpose function for a particular - * signal. + * setups a single pin: + * - reserves the pin so that it is not claimed by another driver + * - setups the iomux according to the configuration + * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + */ +int mxc_iomux_setup_pin(const unsigned int pin, const char *label); +/* + * setups mutliple pins + * convenient way to call the above function with tables */ -void iomux_config_gpr(enum iomux_gp_func , bool); +int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, + const char *label); /* - * set the mode for a IOMUX pin. + * releases a single pin: + * - make it available for a future use by another driver + * - frees the GPIO if the pin was configured as GPIO + * - DOES NOT reconfigure the IOMUX in its reset state */ -int mxc_iomux_mode(unsigned int); +void mxc_iomux_release_pin(const unsigned int pin); +/* + * releases multiple pins + * convenvient way to call the above function with tables + */ +void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count); /* * This function enables/disables the general purpose function for a particular * signal. */ -void mxc_iomux_set_gpr(enum iomux_gp_func, bool); +void mxc_iomux_set_gpr(enum iomux_gp_func, bool en); + +/* + * This function only configures the iomux hardware. + * It is called by the setup functions and should not be called directly anymore. + * It is here visible for backward compatibility + */ +int mxc_iomux_mode(unsigned int pin_mode); #define IOMUX_PADNUM_MASK 0x1ff #define IOMUX_GPIONUM_SHIFT 9 @@ -144,6 +167,11 @@ void mxc_iomux_set_gpr(enum iomux_gp_func, bool); MXC_GPIO_IRQ_START) /* + * The number of gpio devices among the pads + */ +#define GPIO_PORT_MAX 3 + +/* * This enumeration is constructed based on the Section * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated * value is constructed based on the rules described above. @@ -480,6 +508,9 @@ enum iomux_pins { MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), }; +#define PIN_MAX 327 +#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */ + /* * Convenience values for use with mxc_iomux_mode() * @@ -507,7 +538,9 @@ enum iomux_pins { #define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC) @@ -525,6 +558,33 @@ enum iomux_pins { #define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC) +#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC) +#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) +#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) +#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h new file mode 100644 index 00000000000..171f8adc110 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux.h @@ -0,0 +1,127 @@ +/* +* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> +* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301, USA. +*/ + +#ifndef _MXC_IOMUX_H +#define _MXC_IOMUX_H + +/* +* GPIO Module and I/O Multiplexer +* x = 0..3 for reg_A, reg_B, reg_C, reg_D +*/ +#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) +#define MXC_DDIR(x) (0x00 + ((x) << 8)) +#define MXC_OCR1(x) (0x04 + ((x) << 8)) +#define MXC_OCR2(x) (0x08 + ((x) << 8)) +#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) +#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) +#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) +#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) +#define MXC_DR(x) (0x1c + ((x) << 8)) +#define MXC_GIUS(x) (0x20 + ((x) << 8)) +#define MXC_SSR(x) (0x24 + ((x) << 8)) +#define MXC_ICR1(x) (0x28 + ((x) << 8)) +#define MXC_ICR2(x) (0x2c + ((x) << 8)) +#define MXC_IMR(x) (0x30 + ((x) << 8)) +#define MXC_ISR(x) (0x34 + ((x) << 8)) +#define MXC_GPR(x) (0x38 + ((x) << 8)) +#define MXC_SWR(x) (0x3c + ((x) << 8)) +#define MXC_PUEN(x) (0x40 + ((x) << 8)) + +#ifdef CONFIG_ARCH_MX1 +# define GPIO_PORT_MAX 3 +#endif +#ifdef CONFIG_ARCH_MX2 +# define GPIO_PORT_MAX 5 +#endif + +#ifndef GPIO_PORT_MAX +# error "GPIO config port count unknown!" +#endif + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +#define GPIO_OUT (1 << 8) +#define GPIO_IN (0 << 8) +#define GPIO_PUEN (1 << 9) + +#define GPIO_PF (1 << 10) +#define GPIO_AF (1 << 11) + +#define GPIO_OCR_SHIFT 12 +#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) +#define GPIO_AIN (0 << GPIO_OCR_SHIFT) +#define GPIO_BIN (1 << GPIO_OCR_SHIFT) +#define GPIO_CIN (2 << GPIO_OCR_SHIFT) +#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) + +#define GPIO_AOUT_SHIFT 14 +#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) + +#define GPIO_BOUT_SHIFT 16 +#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + + +#ifdef CONFIG_ARCH_MX1 +#include <mach/iomux-mx1.h> +#endif +#ifdef CONFIG_ARCH_MX2 +#include <mach/iomux-mx2x.h> +#ifdef CONFIG_MACH_MX21 +#include <mach/iomux-mx21.h> +#endif +#ifdef CONFIG_MACH_MX27 +#include <mach/iomux-mx27.h> +#endif +#endif + + +/* decode irq number to use with IMR(x), ISR(x) and friends */ +#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) + +#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) +#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) +#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) +#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) +#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) + + +extern void mxc_gpio_mode(int gpio_mode); +extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label); +extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); + +#endif diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 0b808399097..e0783e61958 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -14,7 +14,12 @@ #if defined CONFIG_ARCH_MX1 #define PHYS_OFFSET UL(0x08000000) #elif defined CONFIG_ARCH_MX2 +#ifdef CONFIG_MACH_MX21 +#define PHYS_OFFSET UL(0xC0000000) +#endif +#ifdef CONFIG_MACH_MX27 #define PHYS_OFFSET UL(0xA0000000) +#endif #elif defined CONFIG_ARCH_MX3 #define PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h new file mode 100644 index 00000000000..e8c4cf56c24 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -0,0 +1,78 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de + * + * This contains i.MX21-specific hardware definitions. For those + * hardware pieces that are common between i.MX21 and i.MX27, have a + * look at mx2x.h. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_MX21_H__ +#define __ASM_ARCH_MXC_MX21_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + + +/* Memory regions and CS */ +#define SDRAM_BASE_ADDR 0xC0000000 +#define CSD1_BASE_ADDR 0xC4000000 + +#define CS0_BASE_ADDR 0xC8000000 +#define CS1_BASE_ADDR 0xCC000000 +#define CS2_BASE_ADDR 0xD0000000 +#define CS3_BASE_ADDR 0xD1000000 +#define CS4_BASE_ADDR 0xD2000000 +#define CS5_BASE_ADDR 0xDD000000 +#define PCMCIA_MEM_BASE_ADDR 0xD4000000 + +/* NAND, SDRAM, WEIM etc controllers */ +#define X_MEMC_BASE_ADDR 0xDF000000 +#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 +#define X_MEMC_SIZE SZ_256K + +#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) +#define EIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) +#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) +#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) + +#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */ + +/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ +#define ARCH_NR_GPIOS (6*32 + 16) + +/* fixed interrupt numbers */ +#define MXC_INT_USBCTRL 58 +#define MXC_INT_USBCTRL 58 +#define MXC_INT_USBMNP 57 +#define MXC_INT_USBFUNC 56 +#define MXC_INT_USBHOST 55 +#define MXC_INT_USBDMA 54 +#define MXC_INT_USBWKUP 53 +#define MXC_INT_EMMADEC 50 +#define MXC_INT_EMMAENC 49 +#define MXC_INT_BMI 30 +#define MXC_INT_FIRI 9 + +/* fixed DMA request numbers */ +#define DMA_REQ_BMI_RX 29 +#define DMA_REQ_BMI_TX 28 +#define DMA_REQ_FIRI_RX 4 + +#endif /* __ASM_ARCH_MXC_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 0313be72055..6e93f2c0b7b 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -2,6 +2,10 @@ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de * + * This contains i.MX27-specific hardware definitions. For those + * hardware pieces that are common between i.MX21 and i.MX27, have a + * look at mx2x.h. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 @@ -27,35 +31,6 @@ /* IRAM */ #define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ -/* Register offests */ -#define AIPI_BASE_ADDR 0x10000000 -#define AIPI_BASE_ADDR_VIRT 0xF4000000 -#define AIPI_SIZE SZ_1M - -#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) -#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) -#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) -#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) -#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) -#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) -#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) -#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) -#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) -#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) -#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) -#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) -#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) -#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) -#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) -#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) -#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) -#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) -#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) -#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) -#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) -#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) - -#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) #define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000) #define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000) #define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000) @@ -64,55 +39,24 @@ #define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000) #define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000) #define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000) - -#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) -#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) #define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000) -#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) -/* for mx27*/ #define OTG_BASE_ADDR USBOTG_BASE_ADDR #define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000) -#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000) -#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) -#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) -#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) #define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000) - #define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000) #define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000) #define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000) #define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000) #define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000) -#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) -#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) - -/* ROMP and AVIC */ +/* ROM patch */ #define ROMP_BASE_ADDR 0x10041000 -#define AVIC_BASE_ADDR 0x10040000 - -#define SAHB1_BASE_ADDR 0x80000000 -#define SAHB1_BASE_ADDR_VIRT 0xF4100000 -#define SAHB1_SIZE SZ_1M - -#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) #define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000) -/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ -#define X_MEMC_BASE_ADDR 0xD8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 -#define X_MEMC_SIZE SZ_1M - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) -#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) - /* Memory regions and CS */ -#define SDRAM_BASE_ADDR 0xA0000000 -#define CSD1_BASE_ADDR 0xB0000000 +#define SDRAM_BASE_ADDR 0xA0000000 +#define CSD1_BASE_ADDR 0xB0000000 #define CS0_BASE_ADDR 0xC0000000 #define CS1_BASE_ADDR 0xC8000000 @@ -122,44 +66,20 @@ #define CS5_BASE_ADDR 0xD6000000 #define PCMCIA_MEM_BASE_ADDR 0xDC000000 -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (void __iomem *) \ - (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ - AIPI_IO_ADDRESS(x) : \ - ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ - SAHB1_IO_ADDRESS(x) : \ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ - X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) - -/* define the address mapping macros: in physical address order */ -#define AIPI_IO_ADDRESS(x) \ - (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) - -#define SAHB1_IO_ADDRESS(x) \ - (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) +/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ +#define X_MEMC_BASE_ADDR 0xD8000000 +#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 +#define X_MEMC_SIZE SZ_1M -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) +#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) +#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) +#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) +#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) +#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) -/* fixed interrput numbers */ +/* fixed interrupt numbers */ #define MXC_INT_CCM 63 #define MXC_INT_IIM 62 -#define MXC_INT_LCDC 61 -#define MXC_INT_SLCDC 60 #define MXC_INT_SAHARA 59 #define MXC_INT_SCC_SCM 58 #define MXC_INT_SCC_SMN 57 @@ -167,54 +87,12 @@ #define MXC_INT_USB2 55 #define MXC_INT_USB1 54 #define MXC_INT_VPU 53 -#define MXC_INT_EMMAPP 52 -#define MXC_INT_EMMAPRP 51 #define MXC_INT_FEC 50 #define MXC_INT_UART5 49 #define MXC_INT_UART6 48 -#define MXC_INT_DMACH15 47 -#define MXC_INT_DMACH14 46 -#define MXC_INT_DMACH13 45 -#define MXC_INT_DMACH12 44 -#define MXC_INT_DMACH11 43 -#define MXC_INT_DMACH10 42 -#define MXC_INT_DMACH9 41 -#define MXC_INT_DMACH8 40 -#define MXC_INT_DMACH7 39 -#define MXC_INT_DMACH6 38 -#define MXC_INT_DMACH5 37 -#define MXC_INT_DMACH4 36 -#define MXC_INT_DMACH3 35 -#define MXC_INT_DMACH2 34 -#define MXC_INT_DMACH1 33 -#define MXC_INT_DMACH0 32 -#define MXC_INT_CSI 31 #define MXC_INT_ATA 30 -#define MXC_INT_NANDFC 29 -#define MXC_INT_PCMCIA 28 -#define MXC_INT_WDOG 27 -#define MXC_INT_GPT1 26 -#define MXC_INT_GPT2 25 -#define MXC_INT_GPT3 24 -#define MXC_INT_GPT INT_GPT1 -#define MXC_INT_PWM 23 -#define MXC_INT_RTC 22 -#define MXC_INT_KPP 21 -#define MXC_INT_UART1 20 -#define MXC_INT_UART2 19 -#define MXC_INT_UART3 18 -#define MXC_INT_UART4 17 -#define MXC_INT_CSPI1 16 -#define MXC_INT_CSPI2 15 -#define MXC_INT_SSI1 14 -#define MXC_INT_SSI2 13 -#define MXC_INT_I2C 12 -#define MXC_INT_SDHC1 11 -#define MXC_INT_SDHC2 10 #define MXC_INT_SDHC3 9 -#define MXC_INT_GPIO 8 #define MXC_INT_SDHC 7 -#define MXC_INT_CSPI3 6 #define MXC_INT_RTIC 5 #define MXC_INT_GPT4 4 #define MXC_INT_GPT5 3 @@ -228,36 +106,9 @@ #define DMA_REQ_UART6_TX 34 #define DMA_REQ_UART5_RX 33 #define DMA_REQ_UART5_TX 32 -#define DMA_REQ_CSI_RX 31 -#define DMA_REQ_CSI_STAT 30 #define DMA_REQ_ATA_RCV 29 #define DMA_REQ_ATA_TX 28 -#define DMA_REQ_UART1_TX 27 -#define DMA_REQ_UART1_RX 26 -#define DMA_REQ_UART2_TX 25 -#define DMA_REQ_UART2_RX 24 -#define DMA_REQ_UART3_TX 23 -#define DMA_REQ_UART3_RX 22 -#define DMA_REQ_UART4_TX 21 -#define DMA_REQ_UART4_RX 20 -#define DMA_REQ_CSPI1_TX 19 -#define DMA_REQ_CSPI1_RX 18 -#define DMA_REQ_CSPI2_TX 17 -#define DMA_REQ_CSPI2_RX 16 -#define DMA_REQ_SSI1_TX1 15 -#define DMA_REQ_SSI1_RX1 14 -#define DMA_REQ_SSI1_TX0 13 -#define DMA_REQ_SSI1_RX0 12 -#define DMA_REQ_SSI2_TX1 11 -#define DMA_REQ_SSI2_RX1 10 -#define DMA_REQ_SSI2_TX0 9 -#define DMA_REQ_SSI2_RX0 8 -#define DMA_REQ_SDHC1 7 -#define DMA_REQ_SDHC2 6 #define DMA_REQ_MSHC 4 -#define DMA_REQ_EXT 3 -#define DMA_REQ_CSPI3_TX 2 -#define DMA_REQ_CSPI3_RX 1 /* silicon revisions specific to i.MX27 */ #define CHIP_REV_1_0 0x00 @@ -267,25 +118,8 @@ extern int mx27_revision(void); #endif -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x1C -#define GPIO_GDIR 0x00 -#define GPIO_PSR 0x24 -#define GPIO_ICR1 0x28 -#define GPIO_ICR2 0x2C -#define GPIO_IMR 0x30 -#define GPIO_ISR 0x34 -#define GPIO_INT_LOW_LEV 0x3 -#define GPIO_INT_HIGH_LEV 0x2 -#define GPIO_INT_RISE_EDGE 0x0 -#define GPIO_INT_FALL_EDGE 0x1 -#define GPIO_INT_NONE 0x4 - /* Mandatory defines used globally */ -/* this is an i.MX27 CPU */ -#define cpu_is_mx27() (1) - /* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ #define ARCH_NR_GPIOS (192 + 16) diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h new file mode 100644 index 00000000000..fc40d3ab8c5 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -0,0 +1,200 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This contains hardware definitions that are common between i.MX21 and + * i.MX27. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_MX2x_H__ +#define __ASM_ARCH_MXC_MX2x_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +/* The following addresses are common between i.MX21 and i.MX27 */ + +/* Register offests */ +#define AIPI_BASE_ADDR 0x10000000 +#define AIPI_BASE_ADDR_VIRT 0xF4000000 +#define AIPI_SIZE SZ_1M + +#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) +#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) +#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) +#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) +#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) +#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) +#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) +#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) +#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) +#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) +#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) +#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) +#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) +#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) +#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) +#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) +#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) +#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) +#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) +#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) +#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) +#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) +#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) +#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) +#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) +#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) +#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000) +#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) +#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) +#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) +#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) +#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) + +#define AVIC_BASE_ADDR 0x10040000 + +#define SAHB1_BASE_ADDR 0x80000000 +#define SAHB1_BASE_ADDR_VIRT 0xF4100000 +#define SAHB1_SIZE SZ_1M + +#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) + +/* + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ +#define IO_ADDRESS(x) \ + (void __force __iomem *) \ + (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ + AIPI_IO_ADDRESS(x) : \ + ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ + SAHB1_IO_ADDRESS(x) : \ + ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ + X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) + +/* define the address mapping macros: in physical address order */ +#define AIPI_IO_ADDRESS(x) \ + (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) + +#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) + +#define SAHB1_IO_ADDRESS(x) \ + (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) + +#define CS4_IO_ADDRESS(x) \ + (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) + +#define X_MEMC_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +#define PCMCIA_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +/* fixed interrupt numbers */ +#define MXC_INT_LCDC 61 +#define MXC_INT_SLCDC 60 +#define MXC_INT_EMMAPP 52 +#define MXC_INT_EMMAPRP 51 +#define MXC_INT_DMACH15 47 +#define MXC_INT_DMACH14 46 +#define MXC_INT_DMACH13 45 +#define MXC_INT_DMACH12 44 +#define MXC_INT_DMACH11 43 +#define MXC_INT_DMACH10 42 +#define MXC_INT_DMACH9 41 +#define MXC_INT_DMACH8 40 +#define MXC_INT_DMACH7 39 +#define MXC_INT_DMACH6 38 +#define MXC_INT_DMACH5 37 +#define MXC_INT_DMACH4 36 +#define MXC_INT_DMACH3 35 +#define MXC_INT_DMACH2 34 +#define MXC_INT_DMACH1 33 +#define MXC_INT_DMACH0 32 +#define MXC_INT_CSI 31 +#define MXC_INT_NANDFC 29 +#define MXC_INT_PCMCIA 28 +#define MXC_INT_WDOG 27 +#define MXC_INT_GPT1 26 +#define MXC_INT_GPT2 25 +#define MXC_INT_GPT3 24 +#define MXC_INT_GPT INT_GPT1 +#define MXC_INT_PWM 23 +#define MXC_INT_RTC 22 +#define MXC_INT_KPP 21 +#define MXC_INT_UART1 20 +#define MXC_INT_UART2 19 +#define MXC_INT_UART3 18 +#define MXC_INT_UART4 17 +#define MXC_INT_CSPI1 16 +#define MXC_INT_CSPI2 15 +#define MXC_INT_SSI1 14 +#define MXC_INT_SSI2 13 +#define MXC_INT_I2C 12 +#define MXC_INT_SDHC1 11 +#define MXC_INT_SDHC2 10 +#define MXC_INT_GPIO 8 +#define MXC_INT_CSPI3 6 + +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x1C +#define GPIO_GDIR 0x00 +#define GPIO_PSR 0x24 +#define GPIO_ICR1 0x28 +#define GPIO_ICR2 0x2C +#define GPIO_IMR 0x30 +#define GPIO_ISR 0x34 +#define GPIO_INT_LOW_LEV 0x3 +#define GPIO_INT_HIGH_LEV 0x2 +#define GPIO_INT_RISE_EDGE 0x0 +#define GPIO_INT_FALL_EDGE 0x1 +#define GPIO_INT_NONE 0x4 + +/* fixed DMA request numbers */ +#define DMA_REQ_CSI_RX 31 +#define DMA_REQ_CSI_STAT 30 +#define DMA_REQ_UART1_TX 27 +#define DMA_REQ_UART1_RX 26 +#define DMA_REQ_UART2_TX 25 +#define DMA_REQ_UART2_RX 24 +#define DMA_REQ_UART3_TX 23 +#define DMA_REQ_UART3_RX 22 +#define DMA_REQ_UART4_TX 21 +#define DMA_REQ_UART4_RX 20 +#define DMA_REQ_CSPI1_TX 19 +#define DMA_REQ_CSPI1_RX 18 +#define DMA_REQ_CSPI2_TX 17 +#define DMA_REQ_CSPI2_RX 16 +#define DMA_REQ_SSI1_TX1 15 +#define DMA_REQ_SSI1_RX1 14 +#define DMA_REQ_SSI1_TX0 13 +#define DMA_REQ_SSI1_RX0 12 +#define DMA_REQ_SSI2_TX1 11 +#define DMA_REQ_SSI2_RX1 10 +#define DMA_REQ_SSI2_TX0 9 +#define DMA_REQ_SSI2_RX0 8 +#define DMA_REQ_SDHC1 7 +#define DMA_REQ_SDHC2 6 +#define DMA_REQ_EXT 3 +#define DMA_REQ_CSPI3_TX 2 +#define DMA_REQ_CSPI3_RX 1 + +#endif /* __ASM_ARCH_MXC_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index de026654b00..0b06941b613 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,360 +1,45 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* - * MX31 memory map: - * - * Virt Phys Size What - * --------------------------------------------------------------------------- - * F8000000 1FFC0000 16K IRAM - * F9000000 30000000 256M L2CC - * FC000000 43F00000 1M AIPS 1 - * FC100000 50000000 1M SPBA - * FC200000 53F00000 1M AIPS 2 - * FC500000 60000000 128M ROMPATCH - * FC400000 68000000 128M AVIC - * 70000000 256M IPU (MAX M2) - * 80000000 256M CSD0 SDRAM/DDR - * 90000000 256M CSD1 SDRAM/DDR - * A0000000 128M CS0 Flash - * A8000000 128M CS1 Flash - * B0000000 32M CS2 - * B2000000 32M CS3 - * F4000000 B4000000 32M CS4 - * B6000000 32M CS5 - * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers - * C0000000 64M PCMCIA/CF - */ - -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/* * IRAM */ -#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ -#define IRAM_BASE_ADDR_VIRT 0xF8000000 -#define IRAM_SIZE SZ_16K - -/* - * L2CC - */ -#define L2CC_BASE_ADDR 0x30000000 -#define L2CC_BASE_ADDR_VIRT 0xF9000000 -#define L2CC_SIZE SZ_1M - -/* - * AIPS 1 - */ -#define AIPS1_BASE_ADDR 0x43F00000 -#define AIPS1_BASE_ADDR_VIRT 0xFC000000 -#define AIPS1_SIZE SZ_1M +#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ +#define MX31_IRAM_SIZE SZ_16K -#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) -#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) -#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) -#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) -#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) -#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) -#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) -#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) #define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) #define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) -#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) -#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) -#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) -#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) -#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) -#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) #define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) #define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) -#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) - -/* - * SPBA global module enabled #0 - */ -#define SPBA0_BASE_ADDR 0x50000000 -#define SPBA0_BASE_ADDR_VIRT 0xFC100000 -#define SPBA0_SIZE SZ_1M #define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) #define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) -#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) -#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) #define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) #define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000) -#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) -#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) -/* - * AIPS 2 - */ -#define AIPS2_BASE_ADDR 0x53F00000 -#define AIPS2_BASE_ADDR_VIRT 0xFC200000 -#define AIPS2_SIZE SZ_1M -#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) #define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) #define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) -#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) -#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) -#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) -#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) -#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) #define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000) #define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000) -#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) -#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) -#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) #define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) -#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) -#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) -#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) -#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) -#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) -#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) -#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) - -/* - * ROMP and AVIC - */ -#define ROMP_BASE_ADDR 0x60000000 -#define ROMP_BASE_ADDR_VIRT 0xFC500000 -#define ROMP_SIZE SZ_1M - -#define AVIC_BASE_ADDR 0x68000000 -#define AVIC_BASE_ADDR_VIRT 0xFC400000 -#define AVIC_SIZE SZ_1M - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ -#define X_MEMC_BASE_ADDR 0xB8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 -#define X_MEMC_SIZE SZ_64K -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) -#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR +#define MX31_NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -/* - * Memory regions and CS - */ -#define IPU_MEM_BASE_ADDR 0x70000000 -#define CSD0_BASE_ADDR 0x80000000 -#define CSD1_BASE_ADDR 0x90000000 -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/*! - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (void __iomem *) \ - (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\ - ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\ - ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ - ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ - ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ - ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ - ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ - ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ - -#define IRAM_IO_ADDRESS(x) \ - (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT) - -#define L2CC_IO_ADDRESS(x) \ - (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) - -#define AIPS1_IO_ADDRESS(x) \ - (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) - -#define SPBA0_IO_ADDRESS(x) \ - (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) - -#define AIPS2_IO_ADDRESS(x) \ - (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) - -#define ROMP_IO_ADDRESS(x) \ - (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) \ - (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* - * Interrupt numbers - */ -#define MXC_INT_PEN_ADS7843 0 -#define MXC_INT_RESV1 1 -#define MXC_INT_CS8900A 2 -#define MXC_INT_I2C3 3 -#define MXC_INT_I2C2 4 #define MXC_INT_MPEG4_ENCODER 5 -#define MXC_INT_RTIC 6 #define MXC_INT_FIRI 7 -#define MXC_INT_MMC_SDHC2 8 +#define MX31_INT_MMC_SDHC2 8 #define MXC_INT_MMC_SDHC1 9 -#define MXC_INT_I2C 10 -#define MXC_INT_SSI2 11 -#define MXC_INT_SSI1 12 -#define MXC_INT_CSPI2 13 -#define MXC_INT_CSPI1 14 -#define MXC_INT_ATA 15 +#define MX31_INT_SSI2 11 +#define MX31_INT_SSI1 12 #define MXC_INT_MBX 16 #define MXC_INT_CSPI3 17 -#define MXC_INT_UART3 18 -#define MXC_INT_IIM 19 #define MXC_INT_SIM2 20 #define MXC_INT_SIM1 21 -#define MXC_INT_RNGA 22 -#define MXC_INT_EVTMON 23 -#define MXC_INT_KPP 24 -#define MXC_INT_RTC 25 -#define MXC_INT_PWM 26 -#define MXC_INT_EPIT2 27 -#define MXC_INT_EPIT1 28 -#define MXC_INT_GPT 29 -#define MXC_INT_RESV30 30 -#define MXC_INT_RESV31 31 -#define MXC_INT_UART2 32 -#define MXC_INT_NANDFC 33 -#define MXC_INT_SDMA 34 +#define MXC_INT_CCM_DVFS 31 #define MXC_INT_USB1 35 #define MXC_INT_USB2 36 #define MXC_INT_USB3 37 #define MXC_INT_USB4 38 -#define MXC_INT_MSHC1 39 #define MXC_INT_MSHC2 40 -#define MXC_INT_IPU_ERR 41 -#define MXC_INT_IPU_SYN 42 -#define MXC_INT_RESV43 43 -#define MXC_INT_RESV44 44 -#define MXC_INT_UART1 45 #define MXC_INT_UART4 46 #define MXC_INT_UART5 47 -#define MXC_INT_ECT 48 -#define MXC_INT_SCC_SCM 49 -#define MXC_INT_SCC_SMN 50 -#define MXC_INT_GPIO2 51 -#define MXC_INT_GPIO1 52 #define MXC_INT_CCM 53 #define MXC_INT_PCMCIA 54 -#define MXC_INT_WDOG 55 -#define MXC_INT_GPIO3 56 -#define MXC_INT_RESV57 57 -#define MXC_INT_EXT_POWER 58 -#define MXC_INT_EXT_TEMPER 59 -#define MXC_INT_EXT_SENSOR60 60 -#define MXC_INT_EXT_SENSOR61 61 -#define MXC_INT_EXT_WDOG 62 -#define MXC_INT_EXT_TV 63 - -#define PROD_SIGNATURE 0x1 /* For MX31 */ - -/* silicon revisions specific to i.MX31 */ -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_1_2 0x12 -#define CHIP_REV_1_3 0x13 -#define CHIP_REV_2_0 0x20 -#define CHIP_REV_2_1 0x21 -#define CHIP_REV_2_2 0x22 -#define CHIP_REV_2_3 0x23 -#define CHIP_REV_3_0 0x30 -#define CHIP_REV_3_1 0x31 -#define CHIP_REV_3_2 0x32 - -#define SYSTEM_REV_MIN CHIP_REV_1_0 -#define SYSTEM_REV_NUM 3 - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x00 -#define GPIO_GDIR 0x04 -#define GPIO_PSR 0x08 -#define GPIO_ICR1 0x0C -#define GPIO_ICR2 0x10 -#define GPIO_IMR 0x14 -#define GPIO_ISR 0x18 -#define GPIO_INT_LOW_LEV 0x0 -#define GPIO_INT_HIGH_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_FALL_EDGE 0x3 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this CPU supports up to 96 GPIOs */ -#define ARCH_NR_GPIOS 96 - -#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - -/* this is a i.MX31 CPU */ -#define cpu_is_mx31() (1) - -extern unsigned int system_rev; - -static inline int mx31_revision(void) -{ - return system_rev; -} -#endif -#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h new file mode 100644 index 00000000000..6465fefb42e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -0,0 +1,29 @@ +/* + * IRAM + */ +#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */ +#define MX35_IRAM_SIZE SZ_128K + +#define MXC_FEC_BASE_ADDR 0x50038000 +#define MX35_NFC_BASE_ADDR 0xBB000000 + +/* + * Interrupt numbers + */ +#define MXC_INT_OWIRE 2 +#define MX35_INT_MMC_SDHC1 7 +#define MXC_INT_MMC_SDHC2 8 +#define MXC_INT_MMC_SDHC3 9 +#define MX35_INT_SSI1 11 +#define MX35_INT_SSI2 12 +#define MXC_INT_GPU2D 16 +#define MXC_INT_ASRC 17 +#define MXC_INT_USBHS 35 +#define MXC_INT_USBOTG 37 +#define MXC_INT_ESAI 40 +#define MXC_INT_CAN1 43 +#define MXC_INT_CAN2 44 +#define MXC_INT_MLB 46 +#define MXC_INT_SPDIF 47 +#define MXC_INT_FEC 57 + diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h new file mode 100644 index 00000000000..36d7ff27b5e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h @@ -0,0 +1,52 @@ +/* + * mx3_camera.h - i.MX3x camera driver header file + * + * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _MX3_CAMERA_H_ +#define _MX3_CAMERA_H_ + +#include <linux/device.h> + +#define MX3_CAMERA_CLK_SRC 1 +#define MX3_CAMERA_EXT_VSYNC 2 +#define MX3_CAMERA_DP 4 +#define MX3_CAMERA_PCP 8 +#define MX3_CAMERA_HSP 0x10 +#define MX3_CAMERA_VSP 0x20 +#define MX3_CAMERA_DATAWIDTH_4 0x40 +#define MX3_CAMERA_DATAWIDTH_8 0x80 +#define MX3_CAMERA_DATAWIDTH_10 0x100 +#define MX3_CAMERA_DATAWIDTH_15 0x200 + +#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ + MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) + +/** + * struct mx3_camera_pdata - i.MX3x camera platform data + * @flags: MX3_CAMERA_* flags + * @mclk_10khz: master clock frequency in 10kHz units + * @dma_dev: IPU DMA device to match against in channel allocation + */ +struct mx3_camera_pdata { + unsigned long flags; + unsigned long mclk_10khz; + struct device *dma_dev; +}; + +#endif diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h index e391a76ca87..ac24c5c4bc8 100644 --- a/arch/arm/plat-mxc/include/mach/mx3fb.h +++ b/arch/arm/plat-mxc/include/mach/mx3fb.h @@ -14,25 +14,25 @@ #include <linux/fb.h> /* Proprietary FB_SYNC_ flags */ -#define FB_SYNC_OE_ACT_HIGH 0x80000000 -#define FB_SYNC_CLK_INVERT 0x40000000 -#define FB_SYNC_DATA_INVERT 0x20000000 -#define FB_SYNC_CLK_IDLE_EN 0x10000000 -#define FB_SYNC_SHARP_MODE 0x08000000 -#define FB_SYNC_SWAP_RGB 0x04000000 -#define FB_SYNC_CLK_SEL_EN 0x02000000 +#define FB_SYNC_OE_ACT_HIGH 0x80000000 +#define FB_SYNC_CLK_INVERT 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 +#define FB_SYNC_CLK_SEL_EN 0x02000000 /** * struct mx3fb_platform_data - mx3fb platform data * - * @dma_dev: pointer to the dma-device, used for dma-slave connection - * @mode: pointer to a platform-provided per mxc_register_fb() videomode + * @dma_dev: pointer to the dma-device, used for dma-slave connection + * @mode: pointer to a platform-provided per mxc_register_fb() videomode */ struct mx3fb_platform_data { - struct device *dma_dev; - const char *name; - const struct fb_videomode *mode; - int num_modes; + struct device *dma_dev; + const char *name; + const struct fb_videomode *mode; + int num_modes; }; #endif diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h new file mode 100644 index 00000000000..3878c6085d5 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -0,0 +1,290 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_MX31_H__ +#define __ASM_ARCH_MXC_MX31_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +/* + * MX31 memory map: + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * FC000000 43F00000 1M AIPS 1 + * FC100000 50000000 1M SPBA + * FC200000 53F00000 1M AIPS 2 + * FC500000 60000000 128M ROMPATCH + * FC400000 68000000 128M AVIC + * 70000000 256M IPU (MAX M2) + * 80000000 256M CSD0 SDRAM/DDR + * 90000000 256M CSD1 SDRAM/DDR + * A0000000 128M CS0 Flash + * A8000000 128M CS1 Flash + * B0000000 32M CS2 + * B2000000 32M CS3 + * F4000000 B4000000 32M CS4 + * B6000000 32M CS5 + * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers + * C0000000 64M PCMCIA/CF + */ + +#define CS0_BASE_ADDR 0xA0000000 +#define CS1_BASE_ADDR 0xA8000000 +#define CS2_BASE_ADDR 0xB0000000 +#define CS3_BASE_ADDR 0xB2000000 + +#define CS4_BASE_ADDR 0xB4000000 +#define CS4_BASE_ADDR_VIRT 0xF4000000 +#define CS4_SIZE SZ_32M + +#define CS5_BASE_ADDR 0xB6000000 +#define PCMCIA_MEM_BASE_ADDR 0xBC000000 + +/* + * L2CC + */ +#define L2CC_BASE_ADDR 0x30000000 +#define L2CC_SIZE SZ_1M + +/* + * AIPS 1 + */ +#define AIPS1_BASE_ADDR 0x43F00000 +#define AIPS1_BASE_ADDR_VIRT 0xFC000000 +#define AIPS1_SIZE SZ_1M + +#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) +#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) +#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) +#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) +#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) +#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) +#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) +#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) +#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) +#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) +#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) +#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) +#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) +#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) +#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) +#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) +#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) +#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) + +/* + * SPBA global module enabled #0 + */ +#define SPBA0_BASE_ADDR 0x50000000 +#define SPBA0_BASE_ADDR_VIRT 0xFC100000 +#define SPBA0_SIZE SZ_1M + +#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) +#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) +#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) +#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) +#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) + +/* + * AIPS 2 + */ +#define AIPS2_BASE_ADDR 0x53F00000 +#define AIPS2_BASE_ADDR_VIRT 0xFC200000 +#define AIPS2_SIZE SZ_1M +#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) +#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) +#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) +#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) +#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) +#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) +#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) +#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) +#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) +#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) +#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) +#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) +#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) +#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) +#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) +#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) + +/* + * ROMP and AVIC + */ +#define ROMP_BASE_ADDR 0x60000000 +#define ROMP_BASE_ADDR_VIRT 0xFC500000 +#define ROMP_SIZE SZ_1M + +#define AVIC_BASE_ADDR 0x68000000 +#define AVIC_BASE_ADDR_VIRT 0xFC400000 +#define AVIC_SIZE SZ_1M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define X_MEMC_BASE_ADDR 0xB8000000 +#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 +#define X_MEMC_SIZE SZ_64K + +#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) +#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) +#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) +#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) +#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR + +/* + * Memory regions and CS + */ +#define IPU_MEM_BASE_ADDR 0x70000000 +#define CSD0_BASE_ADDR 0x80000000 +#define CSD1_BASE_ADDR 0x90000000 + +/*! + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ +#define IO_ADDRESS(x) \ + (void __force __iomem *) \ + (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ + ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ + ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ + ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ + ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ + ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ + ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ + 0xDEADBEEF) + +/* + * define the address mapping macros: in physical address order + */ +#define L2CC_IO_ADDRESS(x) \ + (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) + +#define AIPS1_IO_ADDRESS(x) \ + (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) + +#define SPBA0_IO_ADDRESS(x) \ + (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) + +#define AIPS2_IO_ADDRESS(x) \ + (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) + +#define ROMP_IO_ADDRESS(x) \ + (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) + +#define AVIC_IO_ADDRESS(x) \ + (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) + +#define CS4_IO_ADDRESS(x) \ + (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) + +#define X_MEMC_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +#define PCMCIA_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +/* + * Interrupt numbers + */ +#define MXC_INT_I2C3 3 +#define MXC_INT_I2C2 4 +#define MXC_INT_RTIC 6 +#define MXC_INT_I2C 10 +#define MXC_INT_CSPI2 13 +#define MXC_INT_CSPI1 14 +#define MXC_INT_ATA 15 +#define MXC_INT_UART3 18 +#define MXC_INT_IIM 19 +#define MXC_INT_RNGA 22 +#define MXC_INT_EVTMON 23 +#define MXC_INT_KPP 24 +#define MXC_INT_RTC 25 +#define MXC_INT_PWM 26 +#define MXC_INT_EPIT2 27 +#define MXC_INT_EPIT1 28 +#define MXC_INT_GPT 29 +#define MXC_INT_POWER_FAIL 30 +#define MXC_INT_UART2 32 +#define MXC_INT_NANDFC 33 +#define MXC_INT_SDMA 34 +#define MXC_INT_MSHC1 39 +#define MXC_INT_IPU_ERR 41 +#define MXC_INT_IPU_SYN 42 +#define MXC_INT_UART1 45 +#define MXC_INT_ECT 48 +#define MXC_INT_SCC_SCM 49 +#define MXC_INT_SCC_SMN 50 +#define MXC_INT_GPIO2 51 +#define MXC_INT_GPIO1 52 +#define MXC_INT_WDOG 55 +#define MXC_INT_GPIO3 56 +#define MXC_INT_EXT_POWER 58 +#define MXC_INT_EXT_TEMPER 59 +#define MXC_INT_EXT_SENSOR60 60 +#define MXC_INT_EXT_SENSOR61 61 +#define MXC_INT_EXT_WDOG 62 +#define MXC_INT_EXT_TV 63 + +#define PROD_SIGNATURE 0x1 /* For MX31 */ + +/* silicon revisions specific to i.MX31 */ +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_1_2 0x12 +#define CHIP_REV_1_3 0x13 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_1 0x21 +#define CHIP_REV_2_2 0x22 +#define CHIP_REV_2_3 0x23 +#define CHIP_REV_3_0 0x30 +#define CHIP_REV_3_1 0x31 +#define CHIP_REV_3_2 0x32 + +#define SYSTEM_REV_MIN CHIP_REV_1_0 +#define SYSTEM_REV_NUM 3 + +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x00 +#define GPIO_GDIR 0x04 +#define GPIO_PSR 0x08 +#define GPIO_ICR1 0x0C +#define GPIO_ICR2 0x10 +#define GPIO_IMR 0x14 +#define GPIO_ISR 0x18 +#define GPIO_INT_LOW_LEV 0x0 +#define GPIO_INT_HIGH_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_FALL_EDGE 0x3 +#define GPIO_INT_NONE 0x4 + +/* Mandatory defines used globally */ + +/* this CPU supports up to 96 GPIOs */ +#define ARCH_NR_GPIOS 96 + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +extern unsigned int system_rev; + +static inline int mx31_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX31_H__ */ + diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index f6caab06213..5fa2a07f4ea 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -24,13 +24,74 @@ #error "Do not include directly." #endif -/* clean up all things that are not used */ -#ifndef CONFIG_ARCH_MX3 -# define cpu_is_mx31() (0) +#define MXC_CPU_MX1 1 +#define MXC_CPU_MX21 21 +#define MXC_CPU_MX27 27 +#define MXC_CPU_MX31 31 +#define MXC_CPU_MX35 35 + +#ifndef __ASSEMBLY__ +extern unsigned int __mxc_cpu_type; +#endif + +#ifdef CONFIG_ARCH_MX1 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX1 +# endif +# define cpu_is_mx1() (mxc_cpu_type == MXC_CPU_MX1) +#else +# define cpu_is_mx1() (0) +#endif + +#ifdef CONFIG_MACH_MX21 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX21 +# endif +# define cpu_is_mx21() (mxc_cpu_type == MXC_CPU_MX21) +#else +# define cpu_is_mx21() (0) #endif -#ifndef CONFIG_MACH_MX27 -# define cpu_is_mx27() (0) +#ifdef CONFIG_MACH_MX27 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX27 +# endif +# define cpu_is_mx27() (mxc_cpu_type == MXC_CPU_MX27) +#else +# define cpu_is_mx27() (0) +#endif + +#ifdef CONFIG_ARCH_MX31 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX31 +# endif +# define cpu_is_mx31() (mxc_cpu_type == MXC_CPU_MX31) +#else +# define cpu_is_mx31() (0) +#endif + +#ifdef CONFIG_ARCH_MX35 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX35 +# endif +# define cpu_is_mx35() (mxc_cpu_type == MXC_CPU_MX35) +#else +# define cpu_is_mx35() (0) #endif #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) @@ -39,4 +100,7 @@ #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8) #endif +#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) +#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) + #endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index bbfc37465fc..e56241af870 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -26,9 +26,6 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} +void arch_reset(char mode, const char *cmd); #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c index df6f1839568..a37163ce280 100644 --- a/arch/arm/plat-mxc/iomux-mx1-mx2.c +++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c @@ -32,7 +32,7 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/iomux-mx1-mx2.h> +#include <mach/iomux.h> void mxc_gpio_mode(int gpio_mode) { diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c new file mode 100644 index 00000000000..9bffbc507cc --- /dev/null +++ b/arch/arm/plat-mxc/pwm.c @@ -0,0 +1,300 @@ +/* + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> + +#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21 +#define PWM_VER_1 + +#define PWMCR 0x00 /* PWM Control Register */ +#define PWMSR 0x04 /* PWM Sample Register */ +#define PWMPR 0x08 /* PWM Period Register */ +#define PWMCNR 0x0C /* PWM Counter Register */ + +#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */ +#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */ +#define PWMCR_SWR (1 << 16) /* Software Reset */ +#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */ +#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */ +#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */ +#define PWMCR_IRQ (1 << 7) /* Interrupt Request */ +#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */ +#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */ +#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */ +#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ +#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */ + +#define MAX_DIV (128 * 16) +#endif + +#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31 +#define PWM_VER_2 + +#define PWMCR 0x00 /* PWM Control Register */ +#define PWMSR 0x04 /* PWM Status Register */ +#define PWMIR 0x08 /* PWM Interrupt Register */ +#define PWMSAR 0x0C /* PWM Sample Register */ +#define PWMPR 0x10 /* PWM Period Register */ +#define PWMCNR 0x14 /* PWM Counter Register */ + +#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */ +#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */ +#define PWMCR_SWR (1 << 3) /* Software Reset */ +#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */ +#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16) +#define PWMCR_CLKSRC_OFF (0 << 16) +#define PWMCR_CLKSRC_IPG (1 << 16) +#define PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define PWMCR_CLKSRC_CLK32 (3 << 16) +#define PWMCR_POUTC +#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */ +#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */ +#define PWMCR_DBGEN (1 << 22) /* Debug Mode */ +#define PWMCR_WAITEN (1 << 23) /* Wait Mode */ +#define PWMCR_DOZEN (1 << 24) /* Doze Mode */ +#define PWMCR_STOPEN (1 << 25) /* Stop Mode */ +#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */ + +#define MAX_DIV 4096 +#endif + +#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ +#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ +#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ + +struct pwm_device { + struct list_head node; + struct platform_device *pdev; + + const char *label; + struct clk *clk; + + int clk_enabled; + void __iomem *mmio_base; + + unsigned int use_count; + unsigned int pwm_id; +}; + +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + + if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) + return -EINVAL; + + c = clk_get_rate(pwm->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + +#ifdef PWM_VER_2 + writel(duty_cycles, pwm->mmio_base + PWMSAR); + writel(period_cycles, pwm->mmio_base + PWMPR); + writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN, + pwm->mmio_base + PWMCR); +#elif defined PWM_VER_1 +#error PWM not yet working on MX1 / MX21 +#endif + + return 0; +} +EXPORT_SYMBOL(pwm_config); + +int pwm_enable(struct pwm_device *pwm) +{ + int rc = 0; + + if (!pwm->clk_enabled) { + rc = clk_enable(pwm->clk); + if (!rc) + pwm->clk_enabled = 1; + } + return rc; +} +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + if (pwm->clk_enabled) { + clk_disable(pwm->clk); + pwm->clk_enabled = 0; + } +} +EXPORT_SYMBOL(pwm_disable); + +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_list); + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + struct pwm_device *pwm; + int found = 0; + + mutex_lock(&pwm_lock); + + list_for_each_entry(pwm, &pwm_list, node) { + if (pwm->pwm_id == pwm_id) { + found = 1; + break; + } + } + + if (found) { + if (pwm->use_count == 0) { + pwm->use_count++; + pwm->label = label; + } else + pwm = ERR_PTR(-EBUSY); + } else + pwm = ERR_PTR(-ENOENT); + + mutex_unlock(&pwm_lock); + return pwm; +} +EXPORT_SYMBOL(pwm_request); + +void pwm_free(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + + if (pwm->use_count) { + pwm->use_count--; + pwm->label = NULL; + } else + pr_warning("PWM device already freed\n"); + + mutex_unlock(&pwm_lock); +} +EXPORT_SYMBOL(pwm_free); + +static int __devinit mxc_pwm_probe(struct platform_device *pdev) +{ + struct pwm_device *pwm; + struct resource *r; + int ret = 0; + + pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); + if (pwm == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + pwm->clk = clk_get(&pdev->dev, "pwm"); + + if (IS_ERR(pwm->clk)) { + ret = PTR_ERR(pwm->clk); + goto err_free; + } + + pwm->clk_enabled = 0; + + pwm->use_count = 0; + pwm->pwm_id = pdev->id; + pwm->pdev = pdev; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + if (r == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + if (pwm->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + mutex_lock(&pwm_lock); + list_add_tail(&pwm->node, &pwm_list); + mutex_unlock(&pwm_lock); + + platform_set_drvdata(pdev, pwm); + return 0; + +err_free_mem: + release_mem_region(r->start, r->end - r->start + 1); +err_free_clk: + clk_put(pwm->clk); +err_free: + kfree(pwm); + return ret; +} + +static int __devexit mxc_pwm_remove(struct platform_device *pdev) +{ + struct pwm_device *pwm; + struct resource *r; + + pwm = platform_get_drvdata(pdev); + if (pwm == NULL) + return -ENODEV; + + mutex_lock(&pwm_lock); + list_del(&pwm->node); + mutex_unlock(&pwm_lock); + + iounmap(pwm->mmio_base); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, r->end - r->start + 1); + + clk_put(pwm->clk); + + kfree(pwm); + return 0; +} + +static struct platform_driver mxc_pwm_driver = { + .driver = { + .name = "mxc_pwm", + }, + .probe = mxc_pwm_probe, + .remove = __devexit_p(mxc_pwm_remove), +}; + +static int __init mxc_pwm_init(void) +{ + return platform_driver_register(&mxc_pwm_driver); +} +arch_initcall(mxc_pwm_init); + +static void __exit mxc_pwm_exit(void) +{ + platform_driver_unregister(&mxc_pwm_driver); +} +module_exit(mxc_pwm_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); + diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/plat-mxc/system.c index 7b8269719d1..79c37577c91 100644 --- a/arch/arm/mach-mx2/system.c +++ b/arch/arm/plat-mxc/system.c @@ -3,6 +3,7 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,42 +23,45 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/system.h> -/* - * Put the CPU into idle mode. It is called by default_idle() - * in process.c file. - */ -void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks. - */ - cpu_do_idle(); -} - -#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR) -#define WDOG_WCR_SRS (1 << 4) +#ifdef CONFIG_ARCH_MX1 +#define WDOG_WCR_REG IO_ADDRESS(WDT_BASE_ADDR) +#define WDOG_WCR_ENABLE (1 << 0) +#else +#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR) +#define WDOG_WCR_ENABLE (1 << 2) +#endif /* * Reset the system. It is called by machine_restart(). */ -void arch_reset(char mode) +void arch_reset(char mode, const char *cmd) { - struct clk *clk; + if (!cpu_is_mx1()) { + struct clk *clk; - clk = clk_get(NULL, "wdog_clk"); - if (!clk) { - printk(KERN_ERR"Cannot activate the watchdog. Giving up\n"); - return; + clk = clk_get_sys("imx-wdt.0", NULL); + if (!IS_ERR(clk)) + clk_enable(clk); } - clk_enable(clk); - /* Assert SRS signal */ - __raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG); + __raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + + /* we'll take a jump through zero as a poor second */ + cpu_reset(0); } diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 758a1293bcf..ef1b3cd85bd 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -34,9 +34,6 @@ static struct clock_event_device clockevent_mxc; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; -/* clock source for the timer */ -static struct clk *timer_clk; - /* clock source */ static cycle_t mxc_get_cycles(void) @@ -53,13 +50,11 @@ static struct clocksource clocksource_mxc = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int __init mxc_clocksource_init(void) +static int __init mxc_clocksource_init(struct clk *timer_clk) { - unsigned int clock; - - clock = clk_get_rate(timer_clk); + unsigned int c = clk_get_rate(timer_clk); - clocksource_mxc.mult = clocksource_hz2mult(clock, + clocksource_mxc.mult = clocksource_hz2mult(c, clocksource_mxc.shift); clocksource_register(&clocksource_mxc); @@ -177,13 +172,11 @@ static struct clock_event_device clockevent_mxc = { .rating = 200, }; -static int __init mxc_clockevent_init(void) +static int __init mxc_clockevent_init(struct clk *timer_clk) { - unsigned int clock; - - clock = clk_get_rate(timer_clk); + unsigned int c = clk_get_rate(timer_clk); - clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC, + clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, clockevent_mxc.shift); clockevent_mxc.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_mxc); @@ -197,14 +190,8 @@ static int __init mxc_clockevent_init(void) return 0; } -void __init mxc_timer_init(const char *clk_timer) +void __init mxc_timer_init(struct clk *timer_clk) { - timer_clk = clk_get(NULL, clk_timer); - if (!timer_clk) { - printk(KERN_ERR"Cannot determine timer clock. Giving up.\n"); - return; - } - clk_enable(timer_clk); /* @@ -219,10 +206,9 @@ void __init mxc_timer_init(const char *clk_timer) TIMER_BASE + MXC_TCTL); /* init and register the timer to the framework */ - mxc_clocksource_init(); - mxc_clockevent_init(); + mxc_clocksource_init(timer_clk); + mxc_clockevent_init(timer_clk); /* Make irqs happen */ setup_irq(TIMER_INTERRUPT, &mxc_timer_irq); } - diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 46d3b0b9ce6..9dd68fafb37 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -11,14 +11,17 @@ choice config ARCH_OMAP1 bool "TI OMAP1" + select COMMON_CLKDEV config ARCH_OMAP2 bool "TI OMAP2" select CPU_V6 + select COMMON_CLKDEV config ARCH_OMAP3 bool "TI OMAP3" select CPU_V7 + select COMMON_CLKDEV endchoice @@ -104,6 +107,14 @@ config OMAP_MCBSP Say Y here if you want support for the OMAP Multichannel Buffered Serial Port. +config OMAP_MBOX_FWK + tristate "Mailbox framework support" + depends on ARCH_OMAP + default n + help + Say Y here if you want to use OMAP Mailbox framework support for + DSP, IVA1.0 and IVA2 in OMAP1/2/3. + choice prompt "System timer" default OMAP_MPU_TIMER diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index be6aab9c683..2e0614552ac 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -36,44 +36,6 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk * clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); - int clk_enable(struct clk *clk) { unsigned long flags; @@ -114,22 +76,6 @@ out: } EXPORT_SYMBOL(clk_disable); -int clk_get_usecount(struct clk *clk) -{ - unsigned long flags; - int ret = 0; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->usecount; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_usecount); - unsigned long clk_get_rate(struct clk *clk) { unsigned long flags; @@ -146,13 +92,6 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); -void clk_put(struct clk *clk) -{ - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - /*------------------------------------------------------------------------- * Optional clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ @@ -185,6 +124,11 @@ int clk_set_rate(struct clk *clk, unsigned long rate) spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_set_rate) ret = arch_clock->clk_set_rate(clk, rate); + if (ret == 0) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } spin_unlock_irqrestore(&clockfw_lock, flags); return ret; @@ -200,8 +144,16 @@ int clk_set_parent(struct clk *clk, struct clk *parent) return ret; spin_lock_irqsave(&clockfw_lock, flags); - if (arch_clock->clk_set_parent) - ret = arch_clock->clk_set_parent(clk, parent); + if (clk->usecount == 0) { + if (arch_clock->clk_set_parent) + ret = arch_clock->clk_set_parent(clk, parent); + if (ret == 0) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } + } else + ret = -EBUSY; spin_unlock_irqrestore(&clockfw_lock, flags); return ret; @@ -210,18 +162,7 @@ EXPORT_SYMBOL(clk_set_parent); struct clk *clk_get_parent(struct clk *clk) { - unsigned long flags; - struct clk * ret = NULL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - if (arch_clock->clk_get_parent) - ret = arch_clock->clk_get_parent(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; + return clk->parent; } EXPORT_SYMBOL(clk_get_parent); @@ -250,14 +191,20 @@ static int __init omap_clk_setup(char *str) __setup("mpurate=", omap_clk_setup); /* Used for clocks that always have same value as the parent clock */ -void followparent_recalc(struct clk *clk) +unsigned long followparent_recalc(struct clk *clk) { - if (clk == NULL || IS_ERR(clk)) - return; + return clk->parent->rate; +} - clk->rate = clk->parent->rate; - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ } /* Propagate rate to children */ @@ -265,17 +212,15 @@ void propagate_rate(struct clk * tclk) { struct clk *clkp; - if (tclk == NULL || IS_ERR(tclk)) - return; - - list_for_each_entry(clkp, &clocks, node) { - if (likely(clkp->parent != tclk)) - continue; - if (likely((u32)clkp->recalc)) - clkp->recalc(clkp); + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); } } +static LIST_HEAD(root_clks); + /** * recalculate_root_clocks - recalculate and propagate all root clocks * @@ -287,18 +232,35 @@ void recalculate_root_clocks(void) { struct clk *clkp; - list_for_each_entry(clkp, &clocks, node) { - if (unlikely(!clkp->parent) && likely((u32)clkp->recalc)) - clkp->recalc(clkp); + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); } } +void clk_init_one(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + int clk_register(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) return -EINVAL; + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + list_add(&clk->node, &clocks); if (clk->init) clk->init(clk); @@ -314,39 +276,12 @@ void clk_unregister(struct clk *clk) return; mutex_lock(&clocks_mutex); + list_del(&clk->sibling); list_del(&clk->node); mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); -void clk_deny_idle(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (arch_clock->clk_deny_idle) - arch_clock->clk_deny_idle(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_deny_idle); - -void clk_allow_idle(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (arch_clock->clk_allow_idle) - arch_clock->clk_allow_idle(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_allow_idle); - void clk_enable_init_clocks(void) { struct clk *clkp; @@ -358,6 +293,23 @@ void clk_enable_init_clocks(void) } EXPORT_SYMBOL(clk_enable_init_clocks); +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + #ifdef CONFIG_CPU_FREQ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) { @@ -383,8 +335,10 @@ static int __init clk_disable_unused(void) unsigned long flags; list_for_each_entry(ck, &clocks, node) { - if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || - ck->enable_reg == 0) + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || ck->enable_reg == 0) continue; spin_lock_irqsave(&clockfw_lock, flags); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 6825fbb5a05..d1797147732 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -245,7 +245,7 @@ static struct omap_globals *omap2_globals; static void __init __omap2_set_globals(void) { omap2_set_globals_tap(omap2_globals); - omap2_set_globals_memory(omap2_globals); + omap2_set_globals_sdrc(omap2_globals); omap2_set_globals_control(omap2_globals); omap2_set_globals_prcm(omap2_globals); } diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index b2690242a39..843e8af6406 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -23,10 +23,13 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/clock.h> #include <asm/system.h> #define VERY_HI_RATE 900000000 +static struct cpufreq_frequency_table *freq_table; + #ifdef CONFIG_ARCH_OMAP1 #define MPU_CLK "mpu" #else @@ -39,6 +42,9 @@ static struct clk *mpu_clk; int omap_verify_speed(struct cpufreq_policy *policy) { + if (freq_table) + return cpufreq_frequency_table_verify(policy, freq_table); + if (policy->cpu) return -EINVAL; @@ -70,12 +76,26 @@ static int omap_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; int ret = 0; + /* Ensure desired rate is within allowed range. Some govenors + * (ondemand) will just pass target_freq=0 to get the minimum. */ + if (target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + if (target_freq > policy->cpuinfo.max_freq) + target_freq = policy->cpuinfo.max_freq; + freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; freqs.cpu = 0; + if (freqs.old == freqs.new) + return ret; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - ret = clk_set_rate(mpu_clk, target_freq * 1000); +#ifdef CONFIG_CPU_FREQ_DEBUG + printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n", + freqs.old, freqs.new); +#endif + ret = clk_set_rate(mpu_clk, freqs.new * 1000); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); return ret; @@ -83,16 +103,31 @@ static int omap_target(struct cpufreq_policy *policy, static int __init omap_cpu_init(struct cpufreq_policy *policy) { + int result = 0; + mpu_clk = clk_get(NULL, MPU_CLK); if (IS_ERR(mpu_clk)) return PTR_ERR(mpu_clk); if (policy->cpu != 0) return -EINVAL; + policy->cur = policy->min = policy->max = omap_getspeed(0); - policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; - policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + clk_init_cpufreq_table(&freq_table); + if (freq_table) { + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (!result) + cpufreq_frequency_table_get_attr(freq_table, + policy->cpu); + } else { + policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; + policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, + VERY_HI_RATE) / 1000; + } + + /* FIXME: what's the actual transition time? */ + policy->cpuinfo.transition_latency = 10 * 1000 * 1000; return 0; } @@ -103,6 +138,11 @@ static int omap_cpu_exit(struct cpufreq_policy *policy) return 0; } +static struct freq_attr *omap_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static struct cpufreq_driver omap_driver = { .flags = CPUFREQ_STICKY, .verify = omap_verify_speed, @@ -111,6 +151,7 @@ static struct cpufreq_driver omap_driver = { .init = omap_cpu_init, .exit = omap_cpu_exit, .name = "omap", + .attr = omap_cpufreq_attr, }; static int __init omap_cpufreq_init(void) @@ -119,3 +160,11 @@ static int __init omap_cpufreq_init(void) } arch_initcall(omap_cpufreq_init); + +/* + * if ever we want to remove this, upon cleanup call: + * + * cpufreq_unregister_driver() + * cpufreq_frequency_table_put_attr() + */ + diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 208dbb121f4..87fb7ff4179 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -228,6 +228,9 @@ int __init omap_mmc_add(const char *name, int id, unsigned long base, ret = platform_device_add(pdev); if (ret) goto fail; + + /* return device handle to board setup code */ + data->dev = &pdev->dev; return 0; fail: diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 47ec77af4cc..21cc0142b97 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -123,6 +123,7 @@ static struct dma_link_info *dma_linked_lch; static int dma_lch_count; static int dma_chan_count; +static int omap_dma_reserve_channels; static spinlock_t dma_chan_lock; static struct omap_dma_lch *dma_chan; @@ -737,7 +738,7 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ dma_write(dev_id | (1 << 10), CCR(free_ch)); - } else if (cpu_is_omap730() || cpu_is_omap15xx()) { + } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { dma_write(dev_id, CCR(free_ch)); } @@ -1900,7 +1901,7 @@ static int omap2_dma_handle_ch(int ch) /* STATUS register count is from 1-32 while our is 0-31 */ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id) { - u32 val; + u32 val, enable_reg; int i; val = dma_read(IRQSTATUS_L0); @@ -1909,6 +1910,8 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id) printk(KERN_WARNING "Spurious DMA IRQ\n"); return IRQ_HANDLED; } + enable_reg = dma_read(IRQENABLE_L0); + val &= enable_reg; /* Dispatch only relevant interrupts */ for (i = 0; i < dma_lch_count && val != 0; i++) { if (val & 1) omap2_dma_handle_ch(i); @@ -2321,6 +2324,10 @@ static int __init omap_init_dma(void) return -ENODEV; } + if (cpu_class_is_omap2() && omap_dma_reserve_channels + && (omap_dma_reserve_channels <= dma_lch_count)) + dma_lch_count = omap_dma_reserve_channels; + dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count, GFP_KERNEL); if (!dma_chan) @@ -2339,7 +2346,7 @@ static int __init omap_init_dma(void) printk(KERN_INFO "DMA support for OMAP15xx initialized\n"); dma_chan_count = 9; enable_1510_mode = 1; - } else if (cpu_is_omap16xx() || cpu_is_omap730()) { + } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) { printk(KERN_INFO "OMAP DMA hardware version %d\n", dma_read(HW_ID)); printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", @@ -2371,7 +2378,7 @@ static int __init omap_init_dma(void) u8 revision = dma_read(REVISION) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", revision >> 4, revision & 0xf); - dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; + dma_chan_count = dma_lch_count; } else { dma_chan_count = 0; return 0; @@ -2437,4 +2444,17 @@ static int __init omap_init_dma(void) arch_initcall(omap_init_dma); +/* + * Reserve the omap SDMA channels using cmdline bootarg + * "omap_dma_reserve_ch=". The valid range is 1 to 32 + */ +static int __init omap_dma_cmdline_reserve_ch(char *str) +{ + if (get_option(&str, &omap_dma_reserve_channels) != 1) + omap_dma_reserve_channels = 0; + return 1; +} + +__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch); + diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index e4f0ce04ba9..bfd47570cc9 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -33,6 +33,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/module.h> #include <mach/hardware.h> #include <mach/dmtimer.h> #include <mach/irqs.h> @@ -362,6 +363,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) return timer; } +EXPORT_SYMBOL_GPL(omap_dm_timer_request); struct omap_dm_timer *omap_dm_timer_request_specific(int id) { @@ -385,6 +387,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) return timer; } +EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); void omap_dm_timer_free(struct omap_dm_timer *timer) { @@ -395,6 +398,7 @@ void omap_dm_timer_free(struct omap_dm_timer *timer) WARN_ON(!timer->reserved); timer->reserved = 0; } +EXPORT_SYMBOL_GPL(omap_dm_timer_free); void omap_dm_timer_enable(struct omap_dm_timer *timer) { @@ -406,6 +410,7 @@ void omap_dm_timer_enable(struct omap_dm_timer *timer) timer->enabled = 1; } +EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { @@ -417,11 +422,13 @@ void omap_dm_timer_disable(struct omap_dm_timer *timer) timer->enabled = 0; } +EXPORT_SYMBOL_GPL(omap_dm_timer_disable); int omap_dm_timer_get_irq(struct omap_dm_timer *timer) { return timer->irq; } +EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) @@ -452,6 +459,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) return inputmask; } +EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); #elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3) @@ -459,6 +467,7 @@ struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { return timer->fclk; } +EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk); __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) { @@ -466,6 +475,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) return 0; } +EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); #endif @@ -473,6 +483,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer) { omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0); } +EXPORT_SYMBOL_GPL(omap_dm_timer_trigger); void omap_dm_timer_start(struct omap_dm_timer *timer) { @@ -484,6 +495,7 @@ void omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); } } +EXPORT_SYMBOL_GPL(omap_dm_timer_start); void omap_dm_timer_stop(struct omap_dm_timer *timer) { @@ -495,6 +507,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer) omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); } } +EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 @@ -507,6 +520,7 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else @@ -523,6 +537,7 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * cause an abort. */ __delay(150000); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #endif @@ -541,6 +556,7 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_load); /* Optimized set_load which removes costly spin wait in timer_start */ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, @@ -560,6 +576,7 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load); omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match) @@ -574,6 +591,7 @@ void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_match); void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger) @@ -590,6 +608,7 @@ void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, l |= trigger << 10; omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm); void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) { @@ -603,6 +622,7 @@ void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) } omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler); void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value) @@ -610,6 +630,7 @@ void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value); } +EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { @@ -619,11 +640,13 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) return l; } +EXPORT_SYMBOL_GPL(omap_dm_timer_read_status); void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); } +EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) { @@ -633,11 +656,13 @@ unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) return l; } +EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter); void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value) { omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value); } +EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter); int omap_dm_timers_active(void) { @@ -658,6 +683,7 @@ int omap_dm_timers_active(void) } return 0; } +EXPORT_SYMBOL_GPL(omap_dm_timers_active); int __init omap_dm_timer_init(void) { diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index f856a90b264..d3fa41e3d8c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -81,6 +81,22 @@ #define OMAP730_GPIO_INT_STATUS 0x14 /* + * OMAP850 specific GPIO registers + */ +#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000) +#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800) +#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000) +#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800) +#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000) +#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800) +#define OMAP850_GPIO_DATA_INPUT 0x00 +#define OMAP850_GPIO_DATA_OUTPUT 0x04 +#define OMAP850_GPIO_DIR_CONTROL 0x08 +#define OMAP850_GPIO_INT_CONTROL 0x0c +#define OMAP850_GPIO_INT_MASK 0x10 +#define OMAP850_GPIO_INT_STATUS 0x14 + +/* * omap24xx specific GPIO registers */ #define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000) @@ -159,7 +175,8 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 -#define METHOD_GPIO_24XX 4 +#define METHOD_GPIO_850 4 +#define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { @@ -190,6 +207,19 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif +#ifdef CONFIG_ARCH_OMAP850 +static struct gpio_bank gpio_bank_850[7] = { + { OMAP_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, + { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, + { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, + { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, + { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, + { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, +}; +#endif + + #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { @@ -236,7 +266,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 4)]; } - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 5)]; @@ -251,7 +281,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) static inline int get_gpio_index(int gpio) { - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) return gpio & 0x1f; if (cpu_is_omap24xx()) return gpio & 0x1f; @@ -273,7 +303,7 @@ static inline int gpio_valid(int gpio) return 0; if ((cpu_is_omap16xx()) && gpio < 64) return 0; - if (cpu_is_omap730() && gpio < 192) + if (cpu_is_omap7xx() && gpio < 192) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; @@ -318,6 +348,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP730_GPIO_DIR_CONTROL; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -380,6 +415,16 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_OUTPUT; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -426,6 +471,11 @@ static int __omap_get_gpio_datain(int gpio) reg += OMAP730_GPIO_DATA_INPUT; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_INPUT; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; @@ -598,6 +648,18 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_CONTROL; + l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); @@ -678,6 +740,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP730_GPIO_INT_STATUS; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_STATUS; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; @@ -736,6 +803,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_MASK; + mask = 0xffffffff; + inv = 1; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; @@ -799,6 +873,16 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_INT_MASK; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) @@ -983,6 +1067,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif +#ifdef CONFIG_ARCH_OMAP850 + if (bank->method == METHOD_GPIO_850) + isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; +#endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; @@ -1372,6 +1460,13 @@ static int __init _omap_gpio_init(void) gpio_bank = gpio_bank_730; } #endif +#ifdef CONFIG_ARCH_OMAP850 + if (cpu_is_omap850()) { + printk(KERN_INFO "OMAP850 GPIO hardware\n"); + gpio_bank_count = 7; + gpio_bank = gpio_bank_850; + } +#endif #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { @@ -1420,7 +1515,7 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) { + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); @@ -1743,6 +1838,9 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -1762,7 +1860,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730()) + else if (cpu_class_is_omap2() || cpu_is_omap730() || + cpu_is_omap850()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 467531edefd..a303071d5e3 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -98,6 +98,8 @@ static const int omap34xx_pins[][2] = { static const int omap34xx_pins[][2] = {}; #endif +#define OMAP_I2C_CMDLINE_SETUP (BIT(31)) + static void __init omap_i2c_mux_pins(int bus) { int scl, sda; @@ -119,14 +121,9 @@ static void __init omap_i2c_mux_pins(int bus) omap_cfg_reg(scl); } -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) +static int __init omap_i2c_nr_ports(void) { - int ports, err; - struct platform_device *pdev; - struct resource *res; - resource_size_t base, irq; + int ports = 0; if (cpu_class_is_omap1()) ports = 1; @@ -135,17 +132,16 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, else if (cpu_is_omap34xx()) ports = 3; - BUG_ON(bus_id < 1 || bus_id > ports); + return ports; +} - if (info) { - err = i2c_register_board_info(bus_id, info, len); - if (err) - return err; - } +static int __init omap_i2c_add_bus(int bus_id) +{ + struct platform_device *pdev; + struct resource *res; + resource_size_t base, irq; pdev = &omap_i2c_devices[bus_id - 1]; - *(u32 *)pdev->dev.platform_data = clkrate; - if (bus_id == 1) { res = pdev->resource; if (cpu_class_is_omap1()) { @@ -163,3 +159,81 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, omap_i2c_mux_pins(bus_id - 1); return platform_device_register(pdev); } + +/** + * omap_i2c_bus_setup - Process command line options for the I2C bus speed + * @str: String of options + * + * This function allow to override the default I2C bus speed for given I2C + * bus with a command line option. + * + * Format: i2c_bus=bus_id,clkrate (in kHz) + * + * Returns 1 on success, 0 otherwise. + */ +static int __init omap_i2c_bus_setup(char *str) +{ + int ports; + int ints[3]; + + ports = omap_i2c_nr_ports(); + get_options(str, 3, ints); + if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + return 0; + i2c_rate[ints[1] - 1] = ints[2]; + i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP; + + return 1; +} +__setup("i2c_bus=", omap_i2c_bus_setup); + +/* + * Register busses defined in command line but that are not registered with + * omap_register_i2c_bus from board initialization code. + */ +static int __init omap_register_i2c_bus_cmdline(void) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(i2c_rate); i++) + if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) { + i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP; + err = omap_i2c_add_bus(i + 1); + if (err) + goto out; + } + +out: + return err; +} +subsys_initcall(omap_register_i2c_bus_cmdline); + +/** + * omap_register_i2c_bus - register I2C bus with device descriptors + * @bus_id: bus id counting from number 1 + * @clkrate: clock rate of the bus in kHz + * @info: pointer into I2C device descriptor table or NULL + * @len: number of descriptors in the table + * + * Returns 0 on success or an error code. + */ +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + int err; + + BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + + if (info) { + err = i2c_register_board_info(bus_id, info, len); + if (err) + return err; + } + + if (!i2c_rate[bus_id - 1]) + i2c_rate[bus_id - 1] = clkrate; + i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP; + + return omap_i2c_add_bus(bus_id); +} diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h deleted file mode 100644 index 10d449ea7ed..00000000000 --- a/arch/arm/plat-omap/include/mach/board-2430sdp.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-2430sdp.h - * - * Hardware definitions for TI OMAP2430 SDP board. - * - * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_2430SDP_H -#define __ASM_ARCH_OMAP_2430SDP_H - -/* Placeholder for 2430SDP specific defines */ -#define OMAP24XX_ETHR_START 0x08000300 -#define OMAP24XX_ETHR_GPIO_IRQ 149 -#define SDP2430_CS0_BASE 0x04000000 - -/* Function prototypes */ -extern void sdp2430_flash_init(void); -extern void sdp2430_usb_init(void); - -#endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h deleted file mode 100644 index 61bd5e8f09b..00000000000 --- a/arch/arm/plat-omap/include/mach/board-apollon.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-apollon.h - * - * Hardware definitions for Samsung OMAP24XX Apollon board. - * - * Initial creation by Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_APOLLON_H -#define __ASM_ARCH_OMAP_APOLLON_H - -#include <mach/cpu.h> - -extern void apollon_mmc_init(void); - -static inline int apollon_plus(void) -{ - /* The apollon plus has IDCODE revision 5 */ - return omap_rev() & 0xc0; -} - -/* Placeholder for APOLLON specific defines */ -#define APOLLON_ETHR_GPIO_IRQ 74 - -#endif /* __ASM_ARCH_OMAP_APOLLON_H */ - diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h deleted file mode 100644 index cb3c5ae1277..00000000000 --- a/arch/arm/plat-omap/include/mach/board-fsample.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-fsample.h - * - * Board-specific goodies for TI F-Sample. - * - * Copyright (C) 2006 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FSAMPLE_H -#define __ASM_ARCH_OMAP_FSAMPLE_H - -/* fsample is pretty close to p2-sample */ -#include <mach/board-perseus2.h> - -#define fsample_cpld_read(reg) __raw_readb(reg) -#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) - -#define FSAMPLE_CPLD_BASE 0xE8100000 -#define FSAMPLE_CPLD_SIZE SZ_4K -#define FSAMPLE_CPLD_START 0x05080000 - -#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) -#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) -#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) -#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) - -#define FSAMPLE_CPLD_BIT_BT_RESET 0 -#define FSAMPLE_CPLD_BIT_LCD_RESET 1 -#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 -#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 -#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 -#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 -#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 -#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 -#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 -#define FSAMPLE_CPLD_BIT_OTG_RESET 9 - -#define fsample_cpld_set(bit) \ - fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) - -#define fsample_cpld_clear(bit) \ - fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) - -#endif diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h deleted file mode 100644 index 7c3fa0f0a65..00000000000 --- a/arch/arm/plat-omap/include/mach/board-h4.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-h4.h - * - * Hardware definitions for TI OMAP2420 H4 board. - * - * Initial creation by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_H4_H -#define __ASM_ARCH_OMAP_H4_H - -/* MMC Prototypes */ -extern void h4_mmc_init(void); - -/* Placeholder for H4 specific defines */ -#define OMAP24XX_ETHR_GPIO_IRQ 92 -#endif /* __ASM_ARCH_OMAP_H4_H */ - diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h deleted file mode 100644 index 5ae3e79b9f9..00000000000 --- a/arch/arm/plat-omap/include/mach/board-innovator.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-innovator.h - * - * Copyright (C) 2001 RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_INNOVATOR_H -#define __ASM_ARCH_OMAP_INNOVATOR_H - -#if defined (CONFIG_ARCH_OMAP15XX) - -#ifndef OMAP_SDRAM_DEVICE -#define OMAP_SDRAM_DEVICE D256M_1X16_4B -#endif - -#define OMAP1510P1_IMIF_PRI_VALUE 0x00 -#define OMAP1510P1_EMIFS_PRI_VALUE 0x00 -#define OMAP1510P1_EMIFF_PRI_VALUE 0x00 - -#ifndef __ASSEMBLY__ -void fpga_write(unsigned char val, int reg); -unsigned char fpga_read(int reg); -#endif - -#endif /* CONFIG_ARCH_OMAP15XX */ - -#if defined (CONFIG_ARCH_OMAP16XX) - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define INNOVATOR1610_ETHR_START 0x04000300 - -#endif /* CONFIG_ARCH_OMAP1610 */ -#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */ diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h deleted file mode 100644 index f2339966521..00000000000 --- a/arch/arm/plat-omap/include/mach/board-ldp.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-ldp.h - * - * Hardware definitions for TI OMAP3 LDP. - * - * Copyright (C) 2008 Texas Instruments Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_LDP_H -#define __ASM_ARCH_OMAP_LDP_H - -extern void twl4030_bci_battery_init(void); - -#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ -#define LDP_SMC911X_CS 1 -#define LDP_SMC911X_GPIO 152 -#define DEBUG_BASE 0x08000000 -#define OMAP34XX_ETHR_START DEBUG_BASE -#endif /* __ASM_ARCH_OMAP_LDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h deleted file mode 100644 index 2abbe001af8..00000000000 --- a/arch/arm/plat-omap/include/mach/board-nokia.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-nokia.h - * - * Information structures for Nokia-specific board config data - * - * Copyright (C) 2005 Nokia Corporation - */ - -#ifndef _OMAP_BOARD_NOKIA_H -#define _OMAP_BOARD_NOKIA_H - -#include <linux/types.h> - -#define OMAP_TAG_NOKIA_BT 0x4e01 -#define OMAP_TAG_WLAN_CX3110X 0x4e02 -#define OMAP_TAG_CBUS 0x4e03 -#define OMAP_TAG_EM_ASIC_BB5 0x4e04 - - -#define BT_CHIP_CSR 1 -#define BT_CHIP_TI 2 - -#define BT_SYSCLK_12 1 -#define BT_SYSCLK_38_4 2 - -struct omap_bluetooth_config { - u8 chip_type; - u8 bt_wakeup_gpio; - u8 host_wakeup_gpio; - u8 reset_gpio; - u8 bt_uart; - u8 bd_addr[6]; - u8 bt_sysclk; -}; - -struct omap_wlan_cx3110x_config { - u8 chip_type; - s16 power_gpio; - s16 irq_gpio; - s16 spi_cs_gpio; -}; - -struct omap_cbus_config { - s16 clk_gpio; - s16 dat_gpio; - s16 sel_gpio; -}; - -struct omap_em_asic_bb5_config { - s16 retu_irq_gpio; - s16 tahvo_irq_gpio; -}; - -#endif diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h deleted file mode 100644 index 3080d52d877..00000000000 --- a/arch/arm/plat-omap/include/mach/board-omap3beagle.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-omap3beagle.h - * - * Hardware definitions for TI OMAP3 BEAGLE. - * - * Initial creation by Syed Mohammed Khasim <khasim@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP3_BEAGLE_H -#define __ASM_ARCH_OMAP3_BEAGLE_H - -#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ - diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h deleted file mode 100644 index 3850cb1f220..00000000000 --- a/arch/arm/plat-omap/include/mach/board-osk.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-osk.h - * - * Hardware definitions for TI OMAP5912 OSK board. - * - * Written by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_OSK_H -#define __ASM_ARCH_OMAP_OSK_H - -/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ -#define OMAP_OSK_ETHR_START 0x04800300 - -/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with - * alternate pin configurations for hardware-controlled blinking. - */ -#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) -# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) -# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) -# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) -# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) -# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) - -#endif /* __ASM_ARCH_OMAP_OSK_H */ - diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h deleted file mode 100644 index 7ecae66966d..00000000000 --- a/arch/arm/plat-omap/include/mach/board-overo.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * board-overo.h (Gumstix Overo) - * - * Initial code: Steve Sakoman <steve@sakoman.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OVERO_H -#define __ASM_ARCH_OVERO_H - -#define OVERO_GPIO_BT_XGATE 15 -#define OVERO_GPIO_W2W_NRESET 16 -#define OVERO_GPIO_BT_NRESET 164 -#define OVERO_GPIO_USBH_CPEN 168 -#define OVERO_GPIO_USBH_NRESET 183 - -#endif /* ____ASM_ARCH_OVERO_H */ - diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h deleted file mode 100644 index 6906cdebbcf..00000000000 --- a/arch/arm/plat-omap/include/mach/board-palmte.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-palmte.h - * - * Hardware definitions for the Palm Tungsten E device. - * - * Maintainters : http://palmtelinux.sf.net - * palmtelinux-developpers@lists.sf.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMTE_H -#define __OMAP_BOARD_PALMTE_H - -#define PALMTE_USBDETECT_GPIO 0 -#define PALMTE_USB_OR_DC_GPIO 1 -#define PALMTE_TSC_GPIO 4 -#define PALMTE_PINTDAV_GPIO 6 -#define PALMTE_MMC_WP_GPIO 8 -#define PALMTE_MMC_POWER_GPIO 9 -#define PALMTE_HDQ_GPIO 11 -#define PALMTE_HEADPHONES_GPIO 14 -#define PALMTE_SPEAKER_GPIO 15 -#define PALMTE_DC_GPIO OMAP_MPUIO(2) -#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4) -#define PALMTE_MMC1_GPIO OMAP_MPUIO(6) -#define PALMTE_MMC2_GPIO OMAP_MPUIO(7) -#define PALMTE_MMC3_GPIO OMAP_MPUIO(11) - -#endif /* __OMAP_BOARD_PALMTE_H */ diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h deleted file mode 100644 index e79f382b593..00000000000 --- a/arch/arm/plat-omap/include/mach/board-palmtt.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-palmte.h - * - * Hardware definitions for the Palm Tungsten|T device. - * - * Maintainters : Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMTT_H -#define __OMAP_BOARD_PALMTT_H - -#define PALMTT_USBDETECT_GPIO 0 -#define PALMTT_CABLE_GPIO 1 -#define PALMTT_LED_GPIO 3 -#define PALMTT_PENIRQ_GPIO 6 -#define PALMTT_MMC_WP_GPIO 8 -#define PALMTT_HDQ_GPIO 11 - -#endif /* __OMAP_BOARD_PALMTT_H */ diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h deleted file mode 100644 index b1d7d579b31..00000000000 --- a/arch/arm/plat-omap/include/mach/board-palmz71.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-palmz71.h - * - * Hardware definitions for the Palm Zire71 device. - * - * Maintainters : Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMZ71_H -#define __OMAP_BOARD_PALMZ71_H - -#define PALMZ71_USBDETECT_GPIO 0 -#define PALMZ71_PENIRQ_GPIO 6 -#define PALMZ71_MMC_WP_GPIO 8 -#define PALMZ71_HDQ_GPIO 11 - -#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) -#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) -#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) -#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) - -#endif /* __OMAP_BOARD_PALMZ71_H */ diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h deleted file mode 100644 index c06c3d717d5..00000000000 --- a/arch/arm/plat-omap/include/mach/board-perseus2.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-perseus2.h - * - * Copyright 2003 by Texas Instruments Incorporated - * OMAP730 / Perseus2 support by Jean Pihet - * - * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com) - * Author: RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_PERSEUS2_H -#define __ASM_ARCH_OMAP_PERSEUS2_H - -#include <mach/fpga.h> - -#ifndef OMAP_SDRAM_DEVICE -#define OMAP_SDRAM_DEVICE D256M_1X16_4B -#endif - -#endif diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h index ed6d346ee12..27916b210f5 100644 --- a/arch/arm/plat-omap/include/mach/board-voiceblue.h +++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h @@ -14,7 +14,6 @@ extern void voiceblue_wdt_enable(void); extern void voiceblue_wdt_disable(void); extern void voiceblue_wdt_ping(void); -extern void voiceblue_reset(void); #endif /* __ASM_ARCH_VOICEBLUE_H */ diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h index 9466772fc7c..50ea79a0efa 100644 --- a/arch/arm/plat-omap/include/mach/board.h +++ b/arch/arm/plat-omap/include/mach/board.h @@ -17,7 +17,6 @@ /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03 -#define OMAP_TAG_USB 0x4f04 #define OMAP_TAG_LCD 0x4f05 #define OMAP_TAG_GPIO_SWITCH 0x4f06 #define OMAP_TAG_UART 0x4f07 @@ -133,9 +132,6 @@ struct omap_version_config { char version[12]; }; - -#include <mach/board-nokia.h> - struct omap_board_config_entry { u16 tag; u16 len; diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/mach/clkdev.h new file mode 100644 index 00000000000..730c49d1ebd --- /dev/null +++ b/arch/arm/plat-omap/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 719298554ed..073a2c5569f 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -17,11 +17,16 @@ struct module; struct clk; struct clockdomain; +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); +}; + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) struct clksel_rate { - u8 div; u32 val; + u8 div; u8 flags; }; @@ -34,24 +39,28 @@ struct dpll_data { void __iomem *mult_div1_reg; u32 mult_mask; u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned int rate_tolerance; + unsigned long last_rounded_rate; u16 last_rounded_m; u8 last_rounded_n; - unsigned long last_rounded_rate; - unsigned int rate_tolerance; - u16 max_multiplier; + u8 min_divider; u8 max_divider; u32 max_tolerance; + u16 max_multiplier; # if defined(CONFIG_ARCH_OMAP3) u8 modes; - void __iomem *control_reg; - u32 enable_mask; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; - void __iomem *autoidle_reg; - u32 autoidle_mask; - void __iomem *idlest_reg; - u8 idlest_bit; # endif }; @@ -59,21 +68,21 @@ struct dpll_data { struct clk { struct list_head node; - struct module *owner; + const struct clkops *ops; const char *name; int id; struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ unsigned long rate; __u32 flags; void __iomem *enable_reg; - __u8 enable_bit; - __s8 usecount; - void (*recalc)(struct clk *); + unsigned long (*recalc)(struct clk *); int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*init)(struct clk *); - int (*enable)(struct clk *); - void (*disable)(struct clk *); + __u8 enable_bit; + __s8 usecount; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) u8 fixed_div; void __iomem *clksel_reg; @@ -99,7 +108,6 @@ struct clk_functions { long (*clk_round_rate)(struct clk *clk, unsigned long rate); int (*clk_set_rate)(struct clk *clk, unsigned long rate); int (*clk_set_parent)(struct clk *clk, struct clk *parent); - struct clk * (*clk_get_parent)(struct clk *clk); void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); @@ -110,42 +118,33 @@ struct clk_functions { extern unsigned int mpurate; -extern int clk_init(struct clk_functions * custom_clocks); +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_init_one(struct clk *clk); extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); extern void recalculate_root_clocks(void); -extern void followparent_recalc(struct clk * clk); -extern void clk_allow_idle(struct clk *clk); -extern void clk_deny_idle(struct clk *clk); -extern int clk_get_usecount(struct clk *clk); +extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); +#ifdef CONFIG_CPU_FREQ +extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); +#endif + +extern const struct clkops clkops_null; /* Clock flags */ -#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ +/* bit 0 is free */ #define RATE_FIXED (1 << 1) /* Fixed clock rate */ -#define RATE_PROPAGATES (1 << 2) /* Program children too */ -#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */ -#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */ +/* bits 2-4 are free */ #define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ -#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ #define CLOCK_IDLE_CONTROL (1 << 7) #define CLOCK_NO_IDLE_PARENT (1 << 8) #define DELAYED_APP (1 << 9) /* Delay application of clock */ #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ #define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ -/* bits 13-20 are currently free */ -#define CLOCK_IN_OMAP310 (1 << 21) -#define CLOCK_IN_OMAP730 (1 << 22) -#define CLOCK_IN_OMAP1510 (1 << 23) -#define CLOCK_IN_OMAP16XX (1 << 24) -#define CLOCK_IN_OMAP242X (1 << 25) -#define CLOCK_IN_OMAP243X (1 << 26) -#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ -#define PARENT_CONTROLS_CLOCK (1 << 28) -#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ -#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ +/* bits 13-31 are currently free */ /* Clksel_rate flags */ #define DEFAULT_RATE (1 << 0) @@ -157,9 +156,4 @@ extern void clk_enable_init_clocks(void); #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) -/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */ -#define CORE_CLK_SRC_32K 0 -#define CORE_CLK_SRC_DPLL 1 -#define CORE_CLK_SRC_DPLL_X2 2 - #endif diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h index 1f51f017378..b9d0dd2da89 100644 --- a/arch/arm/plat-omap/include/mach/clockdomain.h +++ b/arch/arm/plat-omap/include/mach/clockdomain.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-omap/clockdomain.h + * arch/arm/plat-omap/include/mach/clockdomain.h * * OMAP2/3 clockdomain framework functions * @@ -48,11 +48,13 @@ */ struct clkdm_pwrdm_autodep { - /* Name of the powerdomain to add a wkdep/sleepdep on */ - const char *pwrdm_name; + union { + /* Name of the powerdomain to add a wkdep/sleepdep on */ + const char *name; - /* Powerdomain pointer (looked up at clkdm_init() time) */ - struct powerdomain *pwrdm; + /* Powerdomain pointer (looked up at clkdm_init() time) */ + struct powerdomain *ptr; + } pwrdm; /* OMAP chip types that this clockdomain dep is valid on */ const struct omap_chip_id omap_chip; @@ -64,8 +66,13 @@ struct clockdomain { /* Clockdomain name */ const char *name; - /* Powerdomain enclosing this clockdomain */ - const char *pwrdm_name; + union { + /* Powerdomain enclosing this clockdomain */ + const char *name; + + /* Powerdomain pointer assigned at clkdm_register() */ + struct powerdomain *ptr; + } pwrdm; /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */ const u16 clktrctrl_mask; @@ -79,9 +86,6 @@ struct clockdomain { /* Usecount tracking */ atomic_t usecount; - /* Powerdomain pointer assigned at clkdm_register() */ - struct powerdomain *pwrdm; - struct list_head node; }; diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index e746ec7e785..0ecf36deb17 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -65,7 +65,7 @@ void omap2_set_globals_343x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); -void omap2_set_globals_memory(struct omap_globals *); +void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index a8e1178a946..98b14425236 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -56,6 +56,14 @@ unsigned int omap_rev(void); # define OMAP_NAME omap730 # endif #endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif #ifdef CONFIG_ARCH_OMAP15XX # ifdef OMAP_NAME # undef MULTI_OMAP1 @@ -105,7 +113,7 @@ unsigned int omap_rev(void); /* * Macros to group OMAP into cpu classes. * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730 + * cpu_is_omap7xx(): True for OMAP730, OMAP850 * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 @@ -153,6 +161,10 @@ IS_OMAP_SUBCLASS(343x, 0x343) # undef cpu_is_omap7xx # define cpu_is_omap7xx() is_omap7xx() # endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif # if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() is_omap15xx() @@ -166,6 +178,10 @@ IS_OMAP_SUBCLASS(343x, 0x343) # undef cpu_is_omap7xx # define cpu_is_omap7xx() 1 # endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif # if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() 1 @@ -219,6 +235,7 @@ IS_OMAP_SUBCLASS(343x, 0x343) * These are only rarely needed. * cpu_is_omap330(): True for OMAP330 * cpu_is_omap730(): True for OMAP730 + * cpu_is_omap850(): True for OMAP850 * cpu_is_omap1510(): True for OMAP1510 * cpu_is_omap1610(): True for OMAP1610 * cpu_is_omap1611(): True for OMAP1611 @@ -241,6 +258,7 @@ static inline int is_omap ##type (void) \ IS_OMAP_TYPE(310, 0x0310) IS_OMAP_TYPE(730, 0x0730) +IS_OMAP_TYPE(850, 0x0850) IS_OMAP_TYPE(1510, 0x1510) IS_OMAP_TYPE(1610, 0x1610) IS_OMAP_TYPE(1611, 0x1611) @@ -255,6 +273,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 +#define cpu_is_omap850() 0 #define cpu_is_omap1510() 0 #define cpu_is_omap1610() 0 #define cpu_is_omap5912() 0 @@ -272,12 +291,22 @@ IS_OMAP_TYPE(3430, 0x3430) # undef cpu_is_omap730 # define cpu_is_omap730() is_omap730() # endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap850 +# define cpu_is_omap850() is_omap850() +# endif #else # if defined(CONFIG_ARCH_OMAP730) # undef cpu_is_omap730 # define cpu_is_omap730() 1 # endif #endif +#else +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap850 +# define cpu_is_omap850() 1 +# endif +#endif /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish @@ -320,7 +349,7 @@ IS_OMAP_TYPE(3430, 0x3430) #endif /* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \ +#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) @@ -355,13 +384,27 @@ IS_OMAP_TYPE(3430, 0x3430) * use omap_chip_is(). * */ -#define CHIP_IS_OMAP2420 (1 << 0) -#define CHIP_IS_OMAP2430 (1 << 1) -#define CHIP_IS_OMAP3430 (1 << 2) -#define CHIP_IS_OMAP3430ES1 (1 << 3) -#define CHIP_IS_OMAP3430ES2 (1 << 4) +#define CHIP_IS_OMAP2420 (1 << 0) +#define CHIP_IS_OMAP2430 (1 << 1) +#define CHIP_IS_OMAP3430 (1 << 2) +#define CHIP_IS_OMAP3430ES1 (1 << 3) +#define CHIP_IS_OMAP3430ES2 (1 << 4) +#define CHIP_IS_OMAP3430ES3_0 (1 << 5) +#define CHIP_IS_OMAP3430ES3_1 (1 << 6) + +#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) + +/* + * "GE" here represents "greater than or equal to" in terms of ES + * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430 + * chips at ES2 and beyond, but not, for example, any OMAP lines after + * OMAP3. + */ +#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ + CHIP_IS_OMAP3430ES3_0 | \ + CHIP_IS_OMAP3430ES3_1) +#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1) -#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) int omap_chip_is(struct omap_chip_id oci); int omap_type(void); @@ -378,5 +421,3 @@ int omap_type(void); void omap2_check_revision(void); #endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ - -#endif diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 8d9dfe31438..2b22a8799bc 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -31,7 +31,8 @@ #define OMAP_MPUIO_BASE 0xfffb5000 -#ifdef CONFIG_ARCH_OMAP730 +#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)) + #define OMAP_MPUIO_INPUT_LATCH 0x00 #define OMAP_MPUIO_OUTPUT 0x02 #define OMAP_MPUIO_IO_CNTL 0x04 diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 45b678439bb..921b16532ff 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -103,6 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern void gpmc_init(void); +extern void __init gpmc_init(void); #endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 6589ddbb63b..3dc423ed3e8 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -286,78 +286,4 @@ #include "omap24xx.h" #include "omap34xx.h" -#ifndef __ASSEMBLER__ - -/* - * --------------------------------------------------------------------------- - * Board specific defines - * --------------------------------------------------------------------------- - */ - -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#include "board-innovator.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H2 -#include "board-h2.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 -#include "board-perseus2.h" -#endif - -#ifdef CONFIG_MACH_OMAP_FSAMPLE -#include "board-fsample.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H3 -#include "board-h3.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H4 -#include "board-h4.h" -#endif - -#ifdef CONFIG_MACH_OMAP_2430SDP -#include "board-2430sdp.h" -#endif - -#ifdef CONFIG_MACH_OMAP3_BEAGLE -#include "board-omap3beagle.h" -#endif - -#ifdef CONFIG_MACH_OMAP_LDP -#include "board-ldp.h" -#endif - -#ifdef CONFIG_MACH_OMAP_APOLLON -#include "board-apollon.h" -#endif - -#ifdef CONFIG_MACH_OMAP_OSK -#include "board-osk.h" -#endif - -#ifdef CONFIG_MACH_VOICEBLUE -#include "board-voiceblue.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMTE -#include "board-palmte.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMZ71 -#include "board-palmz71.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMTT -#include "board-palmtt.h" -#endif - -#ifdef CONFIG_MACH_SX1 -#include "board-sx1.h" -#endif - -#endif /* !__ASSEMBLER__ */ - #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index d92bf796448..0610d7e2b3d 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -185,11 +185,13 @@ #define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a)) #define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a)) +struct omap_sdrc_params; + extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(void); +extern void omap2_init_common_hw(struct omap_sdrc_params *sp); #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_iounmap(v) omap_iounmap(v) diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index bed5274c910..7f57ee66f36 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -105,6 +105,29 @@ #define INT_730_SPGIO_WR 29 /* + * OMAP-850 specific IRQ numbers for interrupt handler 1 + */ +#define INT_850_IH2_FIQ 0 +#define INT_850_IH2_IRQ 1 +#define INT_850_USB_NON_ISO 2 +#define INT_850_USB_ISO 3 +#define INT_850_ICR 4 +#define INT_850_EAC 5 +#define INT_850_GPIO_BANK1 6 +#define INT_850_GPIO_BANK2 7 +#define INT_850_GPIO_BANK3 8 +#define INT_850_McBSP2TX 10 +#define INT_850_McBSP2RX 11 +#define INT_850_McBSP2RX_OVF 12 +#define INT_850_LCD_LINE 14 +#define INT_850_GSM_PROTECT 15 +#define INT_850_TIMER3 16 +#define INT_850_GPIO_BANK5 17 +#define INT_850_GPIO_BANK6 18 +#define INT_850_SPGIO_WR 29 + + +/* * IRQ numbers for interrupt handler 2 * * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below @@ -237,6 +260,64 @@ #define INT_730_DMA_CH15 (62 + IH2_BASE) #define INT_730_NAND (63 + IH2_BASE) +/* + * OMAP-850 specific IRQ numbers for interrupt handler 2 + */ +#define INT_850_HW_ERRORS (0 + IH2_BASE) +#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_850_CFCD (2 + IH2_BASE) +#define INT_850_CFIREQ (3 + IH2_BASE) +#define INT_850_I2C (4 + IH2_BASE) +#define INT_850_PCC (5 + IH2_BASE) +#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_850_SPI_100K_1 (7 + IH2_BASE) +#define INT_850_SYREN_SPI (8 + IH2_BASE) +#define INT_850_VLYNQ (9 + IH2_BASE) +#define INT_850_GPIO_BANK4 (10 + IH2_BASE) +#define INT_850_McBSP1TX (11 + IH2_BASE) +#define INT_850_McBSP1RX (12 + IH2_BASE) +#define INT_850_McBSP1RX_OF (13 + IH2_BASE) +#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_850_UART_MODEM_1 (15 + IH2_BASE) +#define INT_850_MCSI (16 + IH2_BASE) +#define INT_850_uWireTX (17 + IH2_BASE) +#define INT_850_uWireRX (18 + IH2_BASE) +#define INT_850_SMC_CD (19 + IH2_BASE) +#define INT_850_SMC_IREQ (20 + IH2_BASE) +#define INT_850_HDQ_1WIRE (21 + IH2_BASE) +#define INT_850_TIMER32K (22 + IH2_BASE) +#define INT_850_MMC_SDIO (23 + IH2_BASE) +#define INT_850_UPLD (24 + IH2_BASE) +#define INT_850_USB_HHC_1 (27 + IH2_BASE) +#define INT_850_USB_HHC_2 (28 + IH2_BASE) +#define INT_850_USB_GENI (29 + IH2_BASE) +#define INT_850_USB_OTG (30 + IH2_BASE) +#define INT_850_CAMERA_IF (31 + IH2_BASE) +#define INT_850_RNG (32 + IH2_BASE) +#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_850_DBB_RF_EN (34 + IH2_BASE) +#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_850_SHA1_MD5 (36 + IH2_BASE) +#define INT_850_SPI_100K_2 (37 + IH2_BASE) +#define INT_850_RNG_IDLE (38 + IH2_BASE) +#define INT_850_MPUIO (39 + IH2_BASE) +#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_850_LLPC_VSYNC (43 + IH2_BASE) +#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_850_DMA_CH6 (53 + IH2_BASE) +#define INT_850_DMA_CH7 (54 + IH2_BASE) +#define INT_850_DMA_CH8 (55 + IH2_BASE) +#define INT_850_DMA_CH9 (56 + IH2_BASE) +#define INT_850_DMA_CH10 (57 + IH2_BASE) +#define INT_850_DMA_CH11 (58 + IH2_BASE) +#define INT_850_DMA_CH12 (59 + IH2_BASE) +#define INT_850_DMA_CH13 (60 + IH2_BASE) +#define INT_850_DMA_CH14 (61 + IH2_BASE) +#define INT_850_DMA_CH15 (62 + IH2_BASE) +#define INT_850_NAND (63 + IH2_BASE) + #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 #define INT_24XX_SDMA_IRQ1 13 @@ -341,7 +422,7 @@ #define INT_34XX_BENCH_MPU_EMUL 3 -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 #define IH_GPIO_BASE (128 + IH2_BASE) diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h index 7cbed9332e1..b7a6991814e 100644 --- a/arch/arm/plat-omap/include/mach/mailbox.h +++ b/arch/arm/plat-omap/include/mach/mailbox.h @@ -33,6 +33,9 @@ struct omap_mbox_ops { void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + /* ctx */ + void (*save_ctx)(struct omap_mbox *mbox); + void (*restore_ctx)(struct omap_mbox *mbox); }; struct omap_mbox_queue { @@ -53,7 +56,7 @@ struct omap_mbox { mbox_msg_t seq_snd, seq_rcv; - struct device dev; + struct device *dev; struct omap_mbox *next; void *priv; @@ -67,7 +70,27 @@ void omap_mbox_init_seq(struct omap_mbox *); struct omap_mbox *omap_mbox_get(const char *); void omap_mbox_put(struct omap_mbox *); -int omap_mbox_register(struct omap_mbox *); +int omap_mbox_register(struct device *parent, struct omap_mbox *); int omap_mbox_unregister(struct omap_mbox *); +static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) +{ + if (!mbox->ops->save_ctx) { + dev_err(mbox->dev, "%s:\tno save\n", __func__); + return; + } + + mbox->ops->save_ctx(mbox); +} + +static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox) +{ + if (!mbox->ops->restore_ctx) { + dev_err(mbox->dev, "%s:\tno restore\n", __func__); + return; + } + + mbox->ops->restore_ctx(mbox); +} + #endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 113c2466c86..bb154ea7676 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -344,8 +344,6 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; - char const **clk_names; - int num_clks; }; struct omap_mcbsp { @@ -377,8 +375,8 @@ struct omap_mcbsp { /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; struct omap_mcbsp_platform_data *pdata; - struct clk **clks; - int num_clks; + struct clk *iclk; + struct clk *fclk; }; extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count; diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index d6b5ca6c7da..99ed564d927 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -61,9 +61,11 @@ #define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) #define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0)) -#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \ - (dma_addr_t)virt_to_lbus(page_address(page)) : \ - (dma_addr_t)__virt_to_phys(page_address(page));}) +#define __arch_page_to_dma(dev, page) \ + ({ dma_addr_t __dma = page_to_phys(page); \ + if (is_lbus_device(dev)) \ + __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \ + __dma; }) #define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ lbus_to_virt(addr) : \ diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 73a9e15031b..4435bd434e1 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -37,6 +37,8 @@ #define OMAP_MMC_MAX_SLOTS 2 struct omap_mmc_platform_data { + /* back-link to device */ + struct device *dev; /* number of slots per controller */ unsigned nr_slots:2; diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index f4362b8682c..85a62170576 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -61,6 +61,16 @@ .pull_bit = bit, \ .pull_val = status, +#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ + .mux_reg = OMAP850_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ + .pull_reg = OMAP850_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + #else #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ @@ -83,6 +93,15 @@ .pull_bit = bit, \ .pull_val = status, +#define MUX_REG_850(reg, mode_offset, mode) \ + .mux_reg = OMAP850_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + #endif /* CONFIG_OMAP_MUX_DEBUG */ #define MUX_CFG(desc, mux_reg, mode_offset, mode, \ @@ -98,7 +117,7 @@ /* - * OMAP730 has a slightly different config for the pin mux. + * OMAP730/850 has a slightly different config for the pin mux. * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register @@ -114,6 +133,17 @@ PU_PD_REG(NA, 0) \ }, +#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ + pull_bit, pull_status, debug_status)\ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG_850(mux_reg, mode_offset, mode) \ + PULL_REG_850(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(NA, 0) \ +}, + + #define MUX_CFG_24XX(desc, reg_offset, mode, \ pull_en, pull_mode, dbg) \ { \ @@ -221,6 +251,26 @@ enum omap730_index { W17_730_USB_VBUSI, }; +enum omap850_index { + /* OMAP 850 keyboard */ + E2_850_KBR0, + J7_850_KBR1, + E1_850_KBR2, + F3_850_KBR3, + D2_850_KBR4, + C2_850_KBC0, + D3_850_KBC1, + E4_850_KBC2, + F4_850_KBC3, + E3_850_KBC4, + + /* USB */ + AA17_850_USB_DM, + W16_850_USB_PU_EN, + W17_850_USB_VBUSI, +}; + + enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0, @@ -788,7 +838,20 @@ enum omap34xx_index { * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) */ + AF26_34XX_GPIO0, + AF22_34XX_GPIO9, AH8_34XX_GPIO29, + U8_34XX_GPIO54_OUT, + U8_34XX_GPIO54_DOWN, + L8_34XX_GPIO63, + G25_34XX_GPIO86_OUT, + AG4_34XX_GPIO134_OUT, + AE4_34XX_GPIO136_OUT, + AF6_34XX_GPIO140_UP, + AE6_34XX_GPIO141, + AF5_34XX_GPIO142, + AE5_34XX_GPIO143, + H19_34XX_GPIO164_OUT, J25_34XX_GPIO170, }; diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h index 8e0479fff05..ab640151d3e 100644 --- a/arch/arm/plat-omap/include/mach/omap34xx.h +++ b/arch/arm/plat-omap/include/mach/omap34xx.h @@ -49,11 +49,39 @@ #define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE #define OMAP34XX_IC_BASE 0x48200000 + +#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000) +#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100) +#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400) +#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600) +#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00) +#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00) +#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00) +#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000) +#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200) +#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400) +#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800) +#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970) + +#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F) +#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077) +#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF) +#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7) +#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047) +#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F) +#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F) +#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB) +#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB) +#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F) +#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F) +#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007) + #define OMAP34XX_IVA_INTC_BASE 0x40000000 #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) #define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) +#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) #if defined(CONFIG_ARCH_OMAP3430) diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/mach/omap850.h new file mode 100644 index 00000000000..c33f6798171 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap850.h @@ -0,0 +1,102 @@ +/* arch/arm/plat-omap/include/mach/omap850.h + * + * Hardware definitions for TI OMAP850 processor. + * + * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP850_H +#define __ASM_ARCH_OMAP850_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP850_DSP_BASE 0xE0000000 +#define OMAP850_DSP_SIZE 0x50000 +#define OMAP850_DSP_START 0xE0000000 + +#define OMAP850_DSPREG_BASE 0xE1000000 +#define OMAP850_DSPREG_SIZE SZ_128K +#define OMAP850_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_CONFIG_BASE 0xfffe1000 +#define OMAP850_IO_CONF_0 0xfffe1070 +#define OMAP850_IO_CONF_1 0xfffe1074 +#define OMAP850_IO_CONF_2 0xfffe1078 +#define OMAP850_IO_CONF_3 0xfffe107c +#define OMAP850_IO_CONF_4 0xfffe1080 +#define OMAP850_IO_CONF_5 0xfffe1084 +#define OMAP850_IO_CONF_6 0xfffe1088 +#define OMAP850_IO_CONF_7 0xfffe108c +#define OMAP850_IO_CONF_8 0xfffe1090 +#define OMAP850_IO_CONF_9 0xfffe1094 +#define OMAP850_IO_CONF_10 0xfffe1098 +#define OMAP850_IO_CONF_11 0xfffe109c +#define OMAP850_IO_CONF_12 0xfffe10a0 +#define OMAP850_IO_CONF_13 0xfffe10a4 + +#define OMAP850_MODE_1 0xfffe1010 +#define OMAP850_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP850_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_FLASH_CFG_0 0xfffecc10 +#define OMAP850_FLASH_ACFG_0 0xfffecc50 +#define OMAP850_FLASH_CFG_1 0xfffecc14 +#define OMAP850_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_ICR_BASE 0xfffbb800 +#define OMAP850_DSP_M_CTL 0xfffbb804 +#define OMAP850_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP850 PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP850_H */ + diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 37e2f0f38b4..ce6ee792753 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -118,18 +118,6 @@ extern void prevent_idle_sleep(void); extern void allow_idle_sleep(void); -/** - * clk_deny_idle - Prevents the clock from being idled during MPU idle - * @clk: clock signal handle - */ -void clk_deny_idle(struct clk *clk); - -/** - * clk_allow_idle - Counters previous clk_deny_idle - * @clk: clock signal handle - */ -void clk_allow_idle(struct clk *clk); - extern void omap_pm_idle(void); extern void omap_pm_suspend(void); extern void omap730_cpu_suspend(unsigned short, unsigned short); diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h index 2806a9c8e4d..69c9e675d8e 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -50,9 +50,9 @@ /* * Maximum number of clockdomains that can be associated with a powerdomain. - * CORE powerdomain is probably the worst case. + * CORE powerdomain on OMAP3 is the worst case */ -#define PWRDM_MAX_CLKDMS 3 +#define PWRDM_MAX_CLKDMS 4 /* XXX A completely arbitrary number. What is reasonable here? */ #define PWRDM_TRANSITION_BAILOUT 100000 @@ -145,6 +145,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_pwrst(struct powerdomain *pwrdm); int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm); int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm); diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h index 56eba0fd6f6..24ac3c71591 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -20,10 +20,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARM_ARCH_DPM_PRCM_H -#define __ASM_ARM_ARCH_DPM_PRCM_H +#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H +#define __ASM_ARM_ARCH_OMAP_PRCM_H u32 omap_prcm_get_reset_sources(void); +void omap_prcm_arch_reset(char mode); #endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index a98c6c3beb2..adc73522491 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -4,10 +4,12 @@ /* * OMAP2/3 SDRC/SMS register definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * - * Written by Paul Walmsley + * Tony Lindgren + * Paul Walmsley + * Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -64,14 +66,62 @@ * SMS register access */ - -#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg) +#define OMAP242X_SMS_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ #define SMS_SYSCONFIG 0x010 /* REVISIT: fill in other SMS registers here */ + +#ifndef __ASSEMBLER__ + +/** + * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate + * @rate: SDRC clock rate (in Hz) + * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate + * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate + * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate + * @mr: Value to program to SDRC_MR for this rate + * + * This structure holds a pre-computed set of register values for the + * SDRC for a given SDRC clock rate and SDRAM chip. These are + * intended to be pre-computed and specified in an array in the board-*.c + * files. The structure is keyed off the 'rate' field. + */ +struct omap_sdrc_params { + unsigned long rate; + u32 actim_ctrla; + u32 actim_ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + +void __init omap2_sdrc_init(struct omap_sdrc_params *sp); +struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r); + +#ifdef CONFIG_ARCH_OMAP2 + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); + +u32 omap2xxx_sdrc_dll_is_unlocked(void); +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); + +#endif /* CONFIG_ARCH_OMAP2 */ + +#endif /* __ASSEMBLER__ */ + #endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 06923f26154..1060e345423 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -9,12 +9,14 @@ #include <asm/mach-types.h> #include <mach/hardware.h> +#include <mach/prcm.h> + #ifndef CONFIG_MACH_VOICEBLUE #define voiceblue_reset() do {} while (0) +#else +extern void voiceblue_reset(void); #endif -extern void omap_prcm_arch_reset(char mode); - static inline void arch_idle(void) { cpu_do_idle(); @@ -38,7 +40,7 @@ static inline void omap1_arch_reset(char mode) omap_writew(1, ARM_RSTCT1); } -static inline void arch_reset(char mode) +static inline void arch_reset(char mode, const char *cmd) { if (!cpu_class_is_omap2()) omap1_arch_reset(mode); diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h index a56a610950c..69f0ceed500 100644 --- a/arch/arm/plat-omap/include/mach/usb.h +++ b/arch/arm/plat-omap/include/mach/usb.h @@ -27,8 +27,18 @@ #define UDC_BASE OMAP2_UDC_BASE #define OMAP_OHCI_BASE OMAP2_OHCI_BASE +#ifdef CONFIG_USB_MUSB_SOC +extern void usb_musb_init(void); +#else +static inline void usb_musb_init(void) +{ +} +#endif + #endif +void omap_usb_init(struct omap_usb_config *pdata); + /*-------------------------------------------------------------------------*/ /* diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index b52ce053e6f..0abfbaa5987 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -1,10 +1,9 @@ /* * OMAP mailbox driver * - * Copyright (C) 2006 Nokia Corporation. All rights reserved. + * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved. * - * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com> - * Restructured by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -22,21 +21,98 @@ * */ -#include <linux/init.h> #include <linux/module.h> -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/device.h> -#include <linux/blkdev.h> -#include <linux/err.h> #include <linux/delay.h> -#include <linux/io.h> + #include <mach/mailbox.h> -#include "mailbox.h" + +static int enable_seq_bit; +module_param(enable_seq_bit, bool, 0); +MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking."); static struct omap_mbox *mboxes; static DEFINE_RWLOCK(mboxes_lock); +/* + * Mailbox sequence bit API + */ + +/* seq_rcv should be initialized with any value other than + * 0 and 1 << 31, to allow either value for the first + * message. */ +static inline void mbox_seq_init(struct omap_mbox *mbox) +{ + if (!enable_seq_bit) + return; + + /* any value other than 0 and 1 << 31 */ + mbox->seq_rcv = 0xffffffff; +} + +static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg) +{ + if (!enable_seq_bit) + return; + + /* add seq_snd to msg */ + *msg = (*msg & 0x7fffffff) | mbox->seq_snd; + /* flip seq_snd */ + mbox->seq_snd ^= 1 << 31; +} + +static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg) +{ + mbox_msg_t seq; + + if (!enable_seq_bit) + return 0; + + seq = msg & (1 << 31); + if (seq == mbox->seq_rcv) + return -1; + mbox->seq_rcv = seq; + return 0; +} + +/* Mailbox FIFO handle functions */ +static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) +{ + return mbox->ops->fifo_read(mbox); +} +static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) +{ + mbox->ops->fifo_write(mbox, msg); +} +static inline int mbox_fifo_empty(struct omap_mbox *mbox) +{ + return mbox->ops->fifo_empty(mbox); +} +static inline int mbox_fifo_full(struct omap_mbox *mbox) +{ + return mbox->ops->fifo_full(mbox); +} + +/* Mailbox IRQ handle functions */ +static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + mbox->ops->enable_irq(mbox, irq); +} +static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + mbox->ops->disable_irq(mbox, irq); +} +static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + if (mbox->ops->ack_irq) + mbox->ops->ack_irq(mbox, irq); +} +static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + return mbox->ops->is_irq(mbox, irq); +} + /* Mailbox Sequence Bit function */ void omap_mbox_init_seq(struct omap_mbox *mbox) { @@ -136,7 +212,7 @@ static void mbox_rx_work(struct work_struct *work) unsigned long flags; if (mbox->rxq->callback == NULL) { - sysfs_notify(&mbox->dev.kobj, NULL, "mbox"); + sysfs_notify(&mbox->dev->kobj, NULL, "mbox"); return; } @@ -204,7 +280,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) /* no more messages in the fifo. clear IRQ source. */ ack_mbox_irq(mbox, IRQ_RX); enable_mbox_irq(mbox, IRQ_RX); - nomem: +nomem: schedule_work(&mbox->rxq->work); } @@ -286,7 +362,7 @@ static ssize_t mbox_show(struct class *class, char *buf) static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL); static struct class omap_mbox_class = { - .name = "omap_mbox", + .name = "omap-mailbox", }; static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, @@ -333,21 +409,6 @@ static int omap_mbox_init(struct omap_mbox *mbox) return ret; } - mbox->dev.class = &omap_mbox_class; - dev_set_name(&mbox->dev, "%s", mbox->name); - dev_set_drvdata(&mbox->dev, mbox); - - ret = device_register(&mbox->dev); - if (unlikely(ret)) - goto fail_device_reg; - - ret = device_create_file(&mbox->dev, &dev_attr_mbox); - if (unlikely(ret)) { - printk(KERN_ERR - "device_create_file failed: %d\n", ret); - goto fail_create_mbox; - } - ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED, mbox->name, mbox); if (unlikely(ret)) { @@ -377,10 +438,6 @@ static int omap_mbox_init(struct omap_mbox *mbox) fail_alloc_txq: free_irq(mbox->irq, mbox); fail_request_irq: - device_remove_file(&mbox->dev, &dev_attr_mbox); - fail_create_mbox: - device_unregister(&mbox->dev); - fail_device_reg: if (unlikely(mbox->ops->shutdown)) mbox->ops->shutdown(mbox); @@ -393,8 +450,6 @@ static void omap_mbox_fini(struct omap_mbox *mbox) mbox_queue_free(mbox->rxq); free_irq(mbox->irq, mbox); - device_remove_file(&mbox->dev, &dev_attr_mbox); - class_unregister(&omap_mbox_class); if (unlikely(mbox->ops->shutdown)) mbox->ops->shutdown(mbox); @@ -440,7 +495,7 @@ void omap_mbox_put(struct omap_mbox *mbox) } EXPORT_SYMBOL(omap_mbox_put); -int omap_mbox_register(struct omap_mbox *mbox) +int omap_mbox_register(struct device *parent, struct omap_mbox *mbox) { int ret = 0; struct omap_mbox **tmp; @@ -450,14 +505,31 @@ int omap_mbox_register(struct omap_mbox *mbox) if (mbox->next) return -EBUSY; + mbox->dev = device_create(&omap_mbox_class, + parent, 0, mbox, "%s", mbox->name); + if (IS_ERR(mbox->dev)) + return PTR_ERR(mbox->dev); + + ret = device_create_file(mbox->dev, &dev_attr_mbox); + if (ret) + goto err_sysfs; + write_lock(&mboxes_lock); tmp = find_mboxes(mbox->name); - if (*tmp) + if (*tmp) { ret = -EBUSY; - else - *tmp = mbox; + write_unlock(&mboxes_lock); + goto err_find; + } + *tmp = mbox; write_unlock(&mboxes_lock); + return 0; + +err_find: + device_remove_file(mbox->dev, &dev_attr_mbox); +err_sysfs: + device_unregister(mbox->dev); return ret; } EXPORT_SYMBOL(omap_mbox_register); @@ -473,6 +545,8 @@ int omap_mbox_unregister(struct omap_mbox *mbox) *tmp = mbox->next; mbox->next = NULL; write_unlock(&mboxes_lock); + device_remove_file(mbox->dev, &dev_attr_mbox); + device_unregister(mbox->dev); return 0; } tmp = &(*tmp)->next; @@ -501,4 +575,6 @@ static void __exit omap_mbox_class_exit(void) subsys_initcall(omap_mbox_class_init); module_exit(omap_mbox_class_exit); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging"); +MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU"); diff --git a/arch/arm/plat-omap/mailbox.h b/arch/arm/plat-omap/mailbox.h deleted file mode 100644 index 67c6740b8ad..00000000000 --- a/arch/arm/plat-omap/mailbox.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Mailbox internal functions - * - * Copyright (C) 2006 Nokia Corporation - * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ARCH_ARM_PLAT_MAILBOX_H -#define __ARCH_ARM_PLAT_MAILBOX_H - -/* - * Mailbox sequence bit API - */ -#if defined(CONFIG_ARCH_OMAP1) -# define MBOX_USE_SEQ_BIT -#elif defined(CONFIG_ARCH_OMAP2) -# define MBOX_USE_SEQ_BIT -#endif - -#ifdef MBOX_USE_SEQ_BIT -/* seq_rcv should be initialized with any value other than - * 0 and 1 << 31, to allow either value for the first - * message. */ -static inline void mbox_seq_init(struct omap_mbox *mbox) -{ - /* any value other than 0 and 1 << 31 */ - mbox->seq_rcv = 0xffffffff; -} - -static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg) -{ - /* add seq_snd to msg */ - *msg = (*msg & 0x7fffffff) | mbox->seq_snd; - /* flip seq_snd */ - mbox->seq_snd ^= 1 << 31; -} - -static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg) -{ - mbox_msg_t seq = msg & (1 << 31); - if (seq == mbox->seq_rcv) - return -1; - mbox->seq_rcv = seq; - return 0; -} -#else -static inline void mbox_seq_init(struct omap_mbox *mbox) -{ -} -static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg) -{ -} -static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg) -{ - return 0; -} -#endif - -/* Mailbox FIFO handle functions */ -static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_read(mbox); -} -static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - mbox->ops->fifo_write(mbox, msg); -} -static inline int mbox_fifo_empty(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_empty(mbox); -} -static inline int mbox_fifo_full(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_full(mbox); -} - -/* Mailbox IRQ handle functions */ -static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - mbox->ops->enable_irq(mbox, irq); -} -static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - mbox->ops->disable_irq(mbox, irq); -} -static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - if (mbox->ops->ack_irq) - mbox->ops->ack_irq(mbox, irq); -} -static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - return mbox->ops->is_irq(mbox, irq); -} - -#endif /* __ARCH_ARM_PLAT_MAILBOX_H */ diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e5842e30e53..28b0a824b8c 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -214,7 +214,6 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; - int i; int err; if (!omap_mcbsp_check_valid_id(id)) { @@ -223,23 +222,23 @@ int omap_mcbsp_request(unsigned int id) } mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) - mcbsp->pdata->ops->request(id); - - for (i = 0; i < mcbsp->num_clks; i++) - clk_enable(mcbsp->clks[i]); - spin_lock(&mcbsp->lock); if (!mcbsp->free) { dev_err(mcbsp->dev, "McBSP%d is currently in use\n", mcbsp->id); spin_unlock(&mcbsp->lock); - return -1; + return -EBUSY; } mcbsp->free = 0; spin_unlock(&mcbsp->lock); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) + mcbsp->pdata->ops->request(id); + + clk_enable(mcbsp->iclk); + clk_enable(mcbsp->fclk); + /* * Make sure that transmitter, receiver and sample-rate generator are * not running before activating IRQs. @@ -278,7 +277,6 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { struct omap_mcbsp *mcbsp; - int i; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -289,8 +287,14 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - for (i = mcbsp->num_clks - 1; i >= 0; i--) - clk_disable(mcbsp->clks[i]); + clk_disable(mcbsp->fclk); + clk_disable(mcbsp->iclk); + + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { + /* Free IRQs */ + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); + } spin_lock(&mcbsp->lock); if (mcbsp->free) { @@ -302,12 +306,6 @@ void omap_mcbsp_free(unsigned int id) mcbsp->free = 1; spin_unlock(&mcbsp->lock); - - if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { - /* Free IRQs */ - free_irq(mcbsp->rx_irq, (void *)mcbsp); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - } } EXPORT_SYMBOL(omap_mcbsp_free); @@ -876,7 +874,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; struct omap_mcbsp *mcbsp; int id = pdev->id - 1; - int i; int ret = 0; if (!pdata) { @@ -899,7 +896,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) ret = -ENOMEM; goto exit; } - mcbsp_ptr[id] = mcbsp; spin_lock_init(&mcbsp->lock); mcbsp->id = id + 1; @@ -921,39 +917,32 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dma_rx_sync = pdata->dma_rx_sync; mcbsp->dma_tx_sync = pdata->dma_tx_sync; - if (pdata->num_clks) { - mcbsp->num_clks = pdata->num_clks; - mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *), - GFP_KERNEL); - if (!mcbsp->clks) { - ret = -ENOMEM; - goto exit; - } - for (i = 0; i < mcbsp->num_clks; i++) { - mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]); - if (IS_ERR(mcbsp->clks[i])) { - dev_err(&pdev->dev, - "Invalid %s configuration for McBSP%d.\n", - pdata->clk_names[i], mcbsp->id); - ret = PTR_ERR(mcbsp->clks[i]); - goto err_clk; - } - } + mcbsp->iclk = clk_get(&pdev->dev, "ick"); + if (IS_ERR(mcbsp->iclk)) { + ret = PTR_ERR(mcbsp->iclk); + dev_err(&pdev->dev, "unable to get ick: %d\n", ret); + goto err_iclk; + } + mcbsp->fclk = clk_get(&pdev->dev, "fck"); + if (IS_ERR(mcbsp->fclk)) { + ret = PTR_ERR(mcbsp->fclk); + dev_err(&pdev->dev, "unable to get fck: %d\n", ret); + goto err_fclk; } mcbsp->pdata = pdata; mcbsp->dev = &pdev->dev; + mcbsp_ptr[id] = mcbsp; platform_set_drvdata(pdev, mcbsp); return 0; -err_clk: - while (i--) - clk_put(mcbsp->clks[i]); - kfree(mcbsp->clks); +err_fclk: + clk_put(mcbsp->iclk); +err_iclk: iounmap(mcbsp->io_base); err_ioremap: - mcbsp->free = 0; + kfree(mcbsp); exit: return ret; } @@ -961,7 +950,6 @@ exit: static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); - int i; platform_set_drvdata(pdev, NULL); if (mcbsp) { @@ -970,18 +958,15 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); - for (i = mcbsp->num_clks - 1; i >= 0; i--) { - clk_disable(mcbsp->clks[i]); - clk_put(mcbsp->clks[i]); - } + clk_disable(mcbsp->fclk); + clk_disable(mcbsp->iclk); + clk_put(mcbsp->fclk); + clk_put(mcbsp->iclk); iounmap(mcbsp->io_base); - if (mcbsp->num_clks) { - kfree(mcbsp->clks); - mcbsp->clks = NULL; - mcbsp->num_clks = 0; - } + mcbsp->fclk = NULL; + mcbsp->iclk = NULL; mcbsp->free = 0; mcbsp->dev = NULL; } @@ -1002,4 +987,3 @@ int __init omap_mcbsp_init(void) /* Register the McBSP driver */ return platform_driver_register(&omap_mcbsp_driver); } - diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index be7bcaf2b83..fa5297d643d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -148,7 +148,7 @@ void __init omap_detect_sram(void) omap_sram_base = OMAP1_SRAM_VA; omap_sram_start = OMAP1_SRAM_PA; - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_sram_size = 0x32000; /* 200K */ else if (cpu_is_omap15xx()) omap_sram_size = 0x30000; /* 192K */ diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index e278de6862a..509f2ed99e2 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -729,30 +729,13 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {} /*-------------------------------------------------------------------------*/ -static struct omap_usb_config platform_data; - -static int __init -omap_usb_init(void) +void __init omap_usb_init(struct omap_usb_config *pdata) { - const struct omap_usb_config *config; - - config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config); - if (config == NULL) { - printk(KERN_ERR "USB: No board-specific " - "platform config found\n"); - return -ENODEV; - } - platform_data = *config; - if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) - omap_otg_init(&platform_data); + omap_otg_init(pdata); else if (cpu_is_omap15xx()) - omap_1510_usb_init(&platform_data); - else { + omap_1510_usb_init(pdata); + else printk(KERN_ERR "USB: No init for your chip yet\n"); - return -ENODEV; - } - return 0; } -subsys_initcall(omap_usb_init); diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 0d12c216476..32eb9e33beb 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -19,7 +19,8 @@ static DEFINE_SPINLOCK(gpio_lock); static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ -static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; +static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)]; +static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)]; static inline void __set_direction(unsigned pin, int input) { @@ -53,7 +54,7 @@ int gpio_direction_input(unsigned pin) { unsigned long flags; - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) { pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -83,7 +84,7 @@ int gpio_direction_output(unsigned pin, int value) unsigned long flags; u32 u; - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) { pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -161,7 +162,9 @@ int gpio_request(unsigned pin, const char *label) unsigned long flags; int ret; - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + if (pin >= GPIO_MAX || + !(test_bit(pin, gpio_valid_input) || + test_bit(pin, gpio_valid_output))) { pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -183,7 +186,9 @@ EXPORT_SYMBOL(gpio_request); void gpio_free(unsigned pin) { - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + if (pin >= GPIO_MAX || + !(test_bit(pin, gpio_valid_input) || + test_bit(pin, gpio_valid_output))) { pr_debug("%s: invalid GPIO %d\n", __func__, pin); return; } @@ -208,12 +213,18 @@ void __init orion_gpio_set_unused(unsigned pin) __set_direction(pin, 0); } -void __init orion_gpio_set_valid(unsigned pin, int valid) +void __init orion_gpio_set_valid(unsigned pin, int mode) { - if (valid) - __set_bit(pin, gpio_valid); + if (mode == 1) + mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK; + if (mode & GPIO_INPUT_OK) + __set_bit(pin, gpio_valid_input); else - __clear_bit(pin, gpio_valid); + __clear_bit(pin, gpio_valid_input); + if (mode & GPIO_OUTPUT_OK) + __set_bit(pin, gpio_valid_output); + else + __clear_bit(pin, gpio_valid_output); } void orion_gpio_set_blink(unsigned pin, int blink) diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index ec743e82c87..33f6c6aec18 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -25,9 +25,13 @@ void gpio_set_value(unsigned pin, int value); * Orion-specific GPIO API extensions. */ void orion_gpio_set_unused(unsigned pin); -void orion_gpio_set_valid(unsigned pin, int valid); void orion_gpio_set_blink(unsigned pin, int blink); +#define GPIO_BIDI_OK (1 << 0) +#define GPIO_INPUT_OK (1 << 1) +#define GPIO_OUTPUT_OK (1 << 2) +void orion_gpio_set_valid(unsigned pin, int mode); + /* * GPIO interrupt handling. */ diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h new file mode 100644 index 00000000000..14ca8867600 --- /dev/null +++ b/arch/arm/plat-orion/include/plat/mvsdio.h @@ -0,0 +1,21 @@ +/* + * arch/arm/plat-orion/include/plat/mvsdio.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MVSDIO_H +#define __MACH_MVSDIO_H + +#include <linux/mbus.h> + +struct mvsdio_platform_data { + struct mbus_dram_target_info *dram; + unsigned int clock; + int gpio_card_detect; + int gpio_write_protect; +}; + +#endif diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion5x_wdt.h new file mode 100644 index 00000000000..3c9cf6a305e --- /dev/null +++ b/arch/arm/plat-orion/include/plat/orion5x_wdt.h @@ -0,0 +1,18 @@ +/* + * arch/arm/plat-orion/include/plat/orion5x_wdt.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_ORION5X_WDT_H +#define __PLAT_ORION5X_WDT_H + +struct orion5x_wdt_platform_data { + u32 tclk; /* no <linux/clk.h> support yet */ +}; + + +#endif + diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig new file mode 100644 index 00000000000..b158e98038e --- /dev/null +++ b/arch/arm/plat-pxa/Kconfig @@ -0,0 +1,3 @@ +if PLAT_PXA + +endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile new file mode 100644 index 00000000000..8f2c4c7fbd4 --- /dev/null +++ b/arch/arm/plat-pxa/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for code common across different PXA processor families +# + +obj-y := dma.o + +obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_PXA3xx) += mfp.o +obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 7de17fc5d54..70aeee407f7 100644 --- a/arch/arm/mach-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-pxa/dma.c + * linux/arch/arm/plat-pxa/dma.c * * PXA DMA registration and IRQ dispatching * @@ -23,8 +23,6 @@ #include <mach/hardware.h> #include <mach/dma.h> -#include <mach/pxa-regs.h> - struct dma_channel { char *name; pxa_dma_prio prio; @@ -36,8 +34,8 @@ static struct dma_channel *dma_channels; static int num_dma_channels; int pxa_request_dma (char *name, pxa_dma_prio prio, - void (*irq_handler)(int, void *), - void *data) + void (*irq_handler)(int, void *), + void *data) { unsigned long flags; int i, found = 0; @@ -113,7 +111,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -int __init pxa_init_dma(int num_ch) +int __init pxa_init_dma(int irq, int num_ch) { int i, ret; @@ -131,7 +129,7 @@ int __init pxa_init_dma(int num_ch) dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW); } - ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); + ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); if (ret) { printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n"); kfree(dma_channels); diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c new file mode 100644 index 00000000000..af819bf21b6 --- /dev/null +++ b/arch/arm/plat-pxa/gpio.c @@ -0,0 +1,337 @@ +/* + * linux/arch/arm/plat-pxa/gpio.c + * + * Generic PXA GPIO handling + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/bootmem.h> + +#include <mach/gpio.h> + +int pxa_last_gpio; + +struct pxa_gpio_chip { + struct gpio_chip chip; + void __iomem *regbase; + char label[10]; + + unsigned long irq_mask; + unsigned long irq_edge_rise; + unsigned long irq_edge_fall; + +#ifdef CONFIG_PM + unsigned long saved_gplr; + unsigned long saved_gpdr; + unsigned long saved_grer; + unsigned long saved_gfer; +#endif +}; + +static DEFINE_SPINLOCK(gpio_lock); +static struct pxa_gpio_chip *pxa_gpio_chips; + +#define for_each_gpio_chip(i, c) \ + for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) + +static inline void __iomem *gpio_chip_base(struct gpio_chip *c) +{ + return container_of(c, struct pxa_gpio_chip, chip)->regbase; +} + +static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio) +{ + return &pxa_gpio_chips[gpio_to_bank(gpio)]; +} + +static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + void __iomem *base = gpio_chip_base(chip); + uint32_t value, mask = 1 << offset; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + value = __raw_readl(base + GPDR_OFFSET); + if (__gpio_is_inverted(chip->base + offset)) + value |= mask; + else + value &= ~mask; + __raw_writel(value, base + GPDR_OFFSET); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} + +static int pxa_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + void __iomem *base = gpio_chip_base(chip); + uint32_t tmp, mask = 1 << offset; + unsigned long flags; + + __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET)); + + spin_lock_irqsave(&gpio_lock, flags); + + tmp = __raw_readl(base + GPDR_OFFSET); + if (__gpio_is_inverted(chip->base + offset)) + tmp &= ~mask; + else + tmp |= mask; + __raw_writel(tmp, base + GPDR_OFFSET); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} + +static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset); +} + +static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + __raw_writel(1 << offset, gpio_chip_base(chip) + + (value ? GPSR_OFFSET : GPCR_OFFSET)); +} + +static int __init pxa_init_gpio_chip(int gpio_end) +{ + int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; + struct pxa_gpio_chip *chips; + + /* this is early, we have to use bootmem allocator, and we really + * want this to be allocated dynamically for different 'gpio_end' + */ + chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip)); + if (chips == NULL) { + pr_err("%s: failed to allocate GPIO chips\n", __func__); + return -ENOMEM; + } + + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { + struct gpio_chip *c = &chips[i].chip; + + sprintf(chips[i].label, "gpio-%d", i); + chips[i].regbase = (void __iomem *)GPIO_BANK(i); + + c->base = gpio; + c->label = chips[i].label; + + c->direction_input = pxa_gpio_direction_input; + c->direction_output = pxa_gpio_direction_output; + c->get = pxa_gpio_get; + c->set = pxa_gpio_set; + + /* number of GPIOs on last bank may be less than 32 */ + c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; + gpiochip_add(c); + } + pxa_gpio_chips = chips; + return 0; +} + +static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) +{ + struct pxa_gpio_chip *c; + int gpio = irq_to_gpio(irq); + unsigned long gpdr, mask = GPIO_bit(gpio); + + c = gpio_to_chip(gpio); + + if (type == IRQ_TYPE_PROBE) { + /* Don't mess with enabled GPIOs using preconfigured edges or + * GPIOs set to alternate function or to output during probe + */ + if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio)) + return 0; + + if (__gpio_is_occupied(gpio)) + return 0; + + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + gpdr = __raw_readl(c->regbase + GPDR_OFFSET); + + if (__gpio_is_inverted(gpio)) + __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET); + else + __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET); + + if (type & IRQ_TYPE_EDGE_RISING) + c->irq_edge_rise |= mask; + else + c->irq_edge_rise &= ~mask; + + if (type & IRQ_TYPE_EDGE_FALLING) + c->irq_edge_fall |= mask; + else + c->irq_edge_fall &= ~mask; + + __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); + __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + + pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, + ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), + ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); + return 0; +} + +static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) +{ + struct pxa_gpio_chip *c; + int loop, gpio, gpio_base, n; + unsigned long gedr; + + do { + loop = 0; + for_each_gpio_chip(gpio, c) { + gpio_base = c->chip.base; + + gedr = __raw_readl(c->regbase + GEDR_OFFSET); + gedr = gedr & c->irq_mask; + __raw_writel(gedr, c->regbase + GEDR_OFFSET); + + n = find_first_bit(&gedr, BITS_PER_LONG); + while (n < BITS_PER_LONG) { + loop = 1; + + generic_handle_irq(gpio_to_irq(gpio_base + n)); + n = find_next_bit(&gedr, BITS_PER_LONG, n + 1); + } + } + } while (loop); +} + +static void pxa_ack_muxed_gpio(unsigned int irq) +{ + int gpio = irq_to_gpio(irq); + struct pxa_gpio_chip *c = gpio_to_chip(gpio); + + __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); +} + +static void pxa_mask_muxed_gpio(unsigned int irq) +{ + int gpio = irq_to_gpio(irq); + struct pxa_gpio_chip *c = gpio_to_chip(gpio); + uint32_t grer, gfer; + + c->irq_mask &= ~GPIO_bit(gpio); + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio); + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio); + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + +static void pxa_unmask_muxed_gpio(unsigned int irq) +{ + int gpio = irq_to_gpio(irq); + struct pxa_gpio_chip *c = gpio_to_chip(gpio); + + c->irq_mask |= GPIO_bit(gpio); + __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); + __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); +} + +static struct irq_chip pxa_muxed_gpio_chip = { + .name = "GPIO", + .ack = pxa_ack_muxed_gpio, + .mask = pxa_mask_muxed_gpio, + .unmask = pxa_unmask_muxed_gpio, + .set_type = pxa_gpio_irq_type, +}; + +void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn) +{ + struct pxa_gpio_chip *c; + int gpio, irq; + + pxa_last_gpio = end; + + /* Initialize GPIO chips */ + pxa_init_gpio_chip(end); + + /* clear all GPIO edge detects */ + for_each_gpio_chip(gpio, c) { + __raw_writel(0, c->regbase + GFER_OFFSET); + __raw_writel(0, c->regbase + GRER_OFFSET); + __raw_writel(~0,c->regbase + GEDR_OFFSET); + } + + for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) { + set_irq_chip(irq, &pxa_muxed_gpio_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + /* Install handler for GPIO>=2 edge detect interrupts */ + set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler); + pxa_muxed_gpio_chip.set_wake = fn; +} + +#ifdef CONFIG_PM +static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) +{ + struct pxa_gpio_chip *c; + int gpio; + + for_each_gpio_chip(gpio, c) { + c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET); + c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET); + c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET); + c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET); + + /* Clear GPIO transition detect bits */ + __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET); + } + return 0; +} + +static int pxa_gpio_resume(struct sys_device *dev) +{ + struct pxa_gpio_chip *c; + int gpio; + + for_each_gpio_chip(gpio, c) { + /* restore level with set/clear */ + __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET); + __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET); + + __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET); + __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET); + __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET); + } + return 0; +} +#else +#define pxa_gpio_suspend NULL +#define pxa_gpio_resume NULL +#endif + +struct sysdev_class pxa_gpio_sysclass = { + .name = "gpio", + .suspend = pxa_gpio_suspend, + .resume = pxa_gpio_resume, +}; + +static int __init pxa_gpio_init(void) +{ + return sysdev_class_register(&pxa_gpio_sysclass); +} + +core_initcall(pxa_gpio_init); diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h new file mode 100644 index 00000000000..a7b91dc0685 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/dma.h @@ -0,0 +1,85 @@ +#ifndef __PLAT_DMA_H +#define __PLAT_DMA_H + +#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x)))) + +#define DCSR(n) DMAC_REG((n) << 2) +#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */ +#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */ +#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4)) +#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4)) +#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4)) +#define DCMD(n) DMAC_REG(0x020c + ((n) << 4)) +#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \ + (((n) & 0x3f) << 2)) + +#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ + +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ +#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ +#define DDADR_STOP (1 << 0) /* Stop (read / write) */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* + * Descriptor structure for PXA's DMA engine + * Note: this structure must always be aligned to a 16-byte boundary. + */ + +typedef struct pxa_dma_desc { + volatile u32 ddadr; /* Points to the next descriptor + flags */ + volatile u32 dsadr; /* DSADR value for the current transfer */ + volatile u32 dtadr; /* DTADR value for the current transfer */ + volatile u32 dcmd; /* DCMD value for the current transfer */ +} pxa_dma_desc; + +typedef enum { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +} pxa_dma_prio; + +/* + * DMA registration + */ + +int __init pxa_init_dma(int irq, int num_ch); + +int pxa_request_dma (char *name, + pxa_dma_prio prio, + void (*irq_handler)(int, void *), + void *data); + +void pxa_free_dma (int dma_ch); + +#endif /* __PLAT_DMA_H */ diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h new file mode 100644 index 00000000000..44248cb926a --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/gpio.h @@ -0,0 +1,62 @@ +#ifndef __PLAT_GPIO_H +#define __PLAT_GPIO_H + +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935 + */ + +#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 + +static inline int gpio_get_value(unsigned gpio) +{ + if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) + return GPLR(gpio) & GPIO_bit(gpio); + else + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { + if (value) + GPSR(gpio) = GPIO_bit(gpio); + else + GPCR(gpio) = GPIO_bit(gpio); + } else + __gpio_set_value(gpio, value); +} + +#define gpio_cansleep __gpio_cansleep + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. + */ +extern int pxa_last_gpio; + +typedef int (*set_wake_t)(unsigned int irq, unsigned int on); + +extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); +#endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h new file mode 100644 index 00000000000..64019464c8d --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -0,0 +1,399 @@ +/* + * arch/arm/plat-pxa/include/plat/mfp.h + * + * Common Multi-Function Pin Definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * 2007-8-21: eric miao <eric.miao@marvell.com> + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_PLAT_MFP_H +#define __ASM_PLAT_MFP_H + +#define mfp_to_gpio(m) ((m) % 128) + +/* list of all the configurable MFP pins */ +enum { + MFP_PIN_INVALID = -1, + + MFP_PIN_GPIO0 = 0, + MFP_PIN_GPIO1, + MFP_PIN_GPIO2, + MFP_PIN_GPIO3, + MFP_PIN_GPIO4, + MFP_PIN_GPIO5, + MFP_PIN_GPIO6, + MFP_PIN_GPIO7, + MFP_PIN_GPIO8, + MFP_PIN_GPIO9, + MFP_PIN_GPIO10, + MFP_PIN_GPIO11, + MFP_PIN_GPIO12, + MFP_PIN_GPIO13, + MFP_PIN_GPIO14, + MFP_PIN_GPIO15, + MFP_PIN_GPIO16, + MFP_PIN_GPIO17, + MFP_PIN_GPIO18, + MFP_PIN_GPIO19, + MFP_PIN_GPIO20, + MFP_PIN_GPIO21, + MFP_PIN_GPIO22, + MFP_PIN_GPIO23, + MFP_PIN_GPIO24, + MFP_PIN_GPIO25, + MFP_PIN_GPIO26, + MFP_PIN_GPIO27, + MFP_PIN_GPIO28, + MFP_PIN_GPIO29, + MFP_PIN_GPIO30, + MFP_PIN_GPIO31, + MFP_PIN_GPIO32, + MFP_PIN_GPIO33, + MFP_PIN_GPIO34, + MFP_PIN_GPIO35, + MFP_PIN_GPIO36, + MFP_PIN_GPIO37, + MFP_PIN_GPIO38, + MFP_PIN_GPIO39, + MFP_PIN_GPIO40, + MFP_PIN_GPIO41, + MFP_PIN_GPIO42, + MFP_PIN_GPIO43, + MFP_PIN_GPIO44, + MFP_PIN_GPIO45, + MFP_PIN_GPIO46, + MFP_PIN_GPIO47, + MFP_PIN_GPIO48, + MFP_PIN_GPIO49, + MFP_PIN_GPIO50, + MFP_PIN_GPIO51, + MFP_PIN_GPIO52, + MFP_PIN_GPIO53, + MFP_PIN_GPIO54, + MFP_PIN_GPIO55, + MFP_PIN_GPIO56, + MFP_PIN_GPIO57, + MFP_PIN_GPIO58, + MFP_PIN_GPIO59, + MFP_PIN_GPIO60, + MFP_PIN_GPIO61, + MFP_PIN_GPIO62, + MFP_PIN_GPIO63, + MFP_PIN_GPIO64, + MFP_PIN_GPIO65, + MFP_PIN_GPIO66, + MFP_PIN_GPIO67, + MFP_PIN_GPIO68, + MFP_PIN_GPIO69, + MFP_PIN_GPIO70, + MFP_PIN_GPIO71, + MFP_PIN_GPIO72, + MFP_PIN_GPIO73, + MFP_PIN_GPIO74, + MFP_PIN_GPIO75, + MFP_PIN_GPIO76, + MFP_PIN_GPIO77, + MFP_PIN_GPIO78, + MFP_PIN_GPIO79, + MFP_PIN_GPIO80, + MFP_PIN_GPIO81, + MFP_PIN_GPIO82, + MFP_PIN_GPIO83, + MFP_PIN_GPIO84, + MFP_PIN_GPIO85, + MFP_PIN_GPIO86, + MFP_PIN_GPIO87, + MFP_PIN_GPIO88, + MFP_PIN_GPIO89, + MFP_PIN_GPIO90, + MFP_PIN_GPIO91, + MFP_PIN_GPIO92, + MFP_PIN_GPIO93, + MFP_PIN_GPIO94, + MFP_PIN_GPIO95, + MFP_PIN_GPIO96, + MFP_PIN_GPIO97, + MFP_PIN_GPIO98, + MFP_PIN_GPIO99, + MFP_PIN_GPIO100, + MFP_PIN_GPIO101, + MFP_PIN_GPIO102, + MFP_PIN_GPIO103, + MFP_PIN_GPIO104, + MFP_PIN_GPIO105, + MFP_PIN_GPIO106, + MFP_PIN_GPIO107, + MFP_PIN_GPIO108, + MFP_PIN_GPIO109, + MFP_PIN_GPIO110, + MFP_PIN_GPIO111, + MFP_PIN_GPIO112, + MFP_PIN_GPIO113, + MFP_PIN_GPIO114, + MFP_PIN_GPIO115, + MFP_PIN_GPIO116, + MFP_PIN_GPIO117, + MFP_PIN_GPIO118, + MFP_PIN_GPIO119, + MFP_PIN_GPIO120, + MFP_PIN_GPIO121, + MFP_PIN_GPIO122, + MFP_PIN_GPIO123, + MFP_PIN_GPIO124, + MFP_PIN_GPIO125, + MFP_PIN_GPIO126, + MFP_PIN_GPIO127, + MFP_PIN_GPIO0_2, + MFP_PIN_GPIO1_2, + MFP_PIN_GPIO2_2, + MFP_PIN_GPIO3_2, + MFP_PIN_GPIO4_2, + MFP_PIN_GPIO5_2, + MFP_PIN_GPIO6_2, + MFP_PIN_GPIO7_2, + MFP_PIN_GPIO8_2, + MFP_PIN_GPIO9_2, + MFP_PIN_GPIO10_2, + MFP_PIN_GPIO11_2, + MFP_PIN_GPIO12_2, + MFP_PIN_GPIO13_2, + MFP_PIN_GPIO14_2, + MFP_PIN_GPIO15_2, + MFP_PIN_GPIO16_2, + MFP_PIN_GPIO17_2, + + MFP_PIN_ULPI_STP, + MFP_PIN_ULPI_NXT, + MFP_PIN_ULPI_DIR, + + MFP_PIN_nXCVREN, + MFP_PIN_DF_CLE_nOE, + MFP_PIN_DF_nADV1_ALE, + MFP_PIN_DF_SCLK_E, + MFP_PIN_DF_SCLK_S, + MFP_PIN_nBE0, + MFP_PIN_nBE1, + MFP_PIN_DF_nADV2_ALE, + MFP_PIN_DF_INT_RnB, + MFP_PIN_DF_nCS0, + MFP_PIN_DF_nCS1, + MFP_PIN_nLUA, + MFP_PIN_nLLA, + MFP_PIN_DF_nWE, + MFP_PIN_DF_ALE_nWE, + MFP_PIN_DF_nRE_nOE, + MFP_PIN_DF_ADDR0, + MFP_PIN_DF_ADDR1, + MFP_PIN_DF_ADDR2, + MFP_PIN_DF_ADDR3, + MFP_PIN_DF_IO0, + MFP_PIN_DF_IO1, + MFP_PIN_DF_IO2, + MFP_PIN_DF_IO3, + MFP_PIN_DF_IO4, + MFP_PIN_DF_IO5, + MFP_PIN_DF_IO6, + MFP_PIN_DF_IO7, + MFP_PIN_DF_IO8, + MFP_PIN_DF_IO9, + MFP_PIN_DF_IO10, + MFP_PIN_DF_IO11, + MFP_PIN_DF_IO12, + MFP_PIN_DF_IO13, + MFP_PIN_DF_IO14, + MFP_PIN_DF_IO15, + MFP_PIN_DF_nCS0_SM_nCS2, + MFP_PIN_DF_nCS1_SM_nCS3, + MFP_PIN_SM_nCS0, + MFP_PIN_SM_nCS1, + MFP_PIN_DF_WEn, + MFP_PIN_DF_REn, + MFP_PIN_DF_CLE_SM_OEn, + MFP_PIN_DF_ALE_SM_WEn, + MFP_PIN_DF_RDY0, + MFP_PIN_DF_RDY1, + + MFP_PIN_SM_SCLK, + MFP_PIN_SM_BE0, + MFP_PIN_SM_BE1, + MFP_PIN_SM_ADV, + MFP_PIN_SM_ADVMUX, + MFP_PIN_SM_RDY, + + MFP_PIN_MMC1_DAT7, + MFP_PIN_MMC1_DAT6, + MFP_PIN_MMC1_DAT5, + MFP_PIN_MMC1_DAT4, + MFP_PIN_MMC1_DAT3, + MFP_PIN_MMC1_DAT2, + MFP_PIN_MMC1_DAT1, + MFP_PIN_MMC1_DAT0, + MFP_PIN_MMC1_CMD, + MFP_PIN_MMC1_CLK, + MFP_PIN_MMC1_CD, + MFP_PIN_MMC1_WP, + + /* additional pins on PXA930 */ + MFP_PIN_GSIM_UIO, + MFP_PIN_GSIM_UCLK, + MFP_PIN_GSIM_UDET, + MFP_PIN_GSIM_nURST, + MFP_PIN_PMIC_INT, + MFP_PIN_RDY, + + MFP_PIN_MAX, +}; + +/* + * a possible MFP configuration is represented by a 32-bit integer + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State + * + * to facilitate the definition, the following macros are provided + * + * MFP_CFG_DEFAULT - default MFP configuration value, with + * alternate function = 0, + * drive strength = fast 3mA (MFP_DS03X) + * low power mode = default + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + */ + +typedef unsigned long mfp_cfg_t; + +#define MFP_PIN(x) ((x) & 0x3ff) + +#define MFP_AF0 (0x0 << 10) +#define MFP_AF1 (0x1 << 10) +#define MFP_AF2 (0x2 << 10) +#define MFP_AF3 (0x3 << 10) +#define MFP_AF4 (0x4 << 10) +#define MFP_AF5 (0x5 << 10) +#define MFP_AF6 (0x6 << 10) +#define MFP_AF7 (0x7 << 10) +#define MFP_AF_MASK (0x7 << 10) +#define MFP_AF(x) (((x) >> 10) & 0x7) + +#define MFP_DS01X (0x0 << 13) +#define MFP_DS02X (0x1 << 13) +#define MFP_DS03X (0x2 << 13) +#define MFP_DS04X (0x3 << 13) +#define MFP_DS06X (0x4 << 13) +#define MFP_DS08X (0x5 << 13) +#define MFP_DS10X (0x6 << 13) +#define MFP_DS13X (0x7 << 13) +#define MFP_DS_MASK (0x7 << 13) +#define MFP_DS(x) (((x) >> 13) & 0x7) + +#define MFP_LPM_DEFAULT (0x0 << 16) +#define MFP_LPM_DRIVE_LOW (0x1 << 16) +#define MFP_LPM_DRIVE_HIGH (0x2 << 16) +#define MFP_LPM_PULL_LOW (0x3 << 16) +#define MFP_LPM_PULL_HIGH (0x4 << 16) +#define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_INPUT (0x6 << 16) +#define MFP_LPM_STATE_MASK (0x7 << 16) +#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) + +#define MFP_LPM_EDGE_NONE (0x0 << 19) +#define MFP_LPM_EDGE_RISE (0x1 << 19) +#define MFP_LPM_EDGE_FALL (0x2 << 19) +#define MFP_LPM_EDGE_BOTH (0x3 << 19) +#define MFP_LPM_EDGE_MASK (0x3 << 19) +#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) + +#define MFP_PULL_NONE (0x0 << 21) +#define MFP_PULL_LOW (0x1 << 21) +#define MFP_PULL_HIGH (0x2 << 21) +#define MFP_PULL_BOTH (0x3 << 21) +#define MFP_PULL_MASK (0x3 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x3) + +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ + MFP_LPM_EDGE_NONE | MFP_PULL_NONE) + +#define MFP_CFG(pin, af) \ + ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) + +#define MFP_CFG_DRV(pin, af, drv) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) + +#define MFP_CFG_LPM(pin, af, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) + +#define MFP_CFG_X(pin, af, drv, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) + +#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by mfp_init() + * + * mfp_init_base() - accepts a virtual base for all MFPR registers and + * initialize the MFP table to a default state + * + * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which + * represents a range of MFP pins from "start" to "end", with the offset + * begining at "offset", to define a single pin, let "end" = -1. + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +void __init mfp_init_base(unsigned long mfpr_base); +void __init mfp_init_addr(struct mfp_addr_map *map); + +/* + * mfp_{read, write}() - for direct read/write access to the MFPR register + * mfp_config() - for configuring a group of MFPR registers + * mfp_config_lpm() - configuring all low power MFPR registers for suspend + * mfp_config_run() - configuring all run time MFPR registers after resume + */ +unsigned long mfp_read(int mfp); +void mfp_write(int mfp, unsigned long mfpr_val); +void mfp_config(unsigned long *mfp_cfgs, int num); +void mfp_config_run(void); +void mfp_config_lpm(void); +#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ + +#endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c new file mode 100644 index 00000000000..e716c622a17 --- /dev/null +++ b/arch/arm/plat-pxa/mfp.c @@ -0,0 +1,278 @@ +/* + * linux/arch/arm/plat-pxa/mfp.c + * + * Multi-Function Pin Support + * + * Copyright (C) 2007 Marvell Internation Ltd. + * + * 2007-08-21: eric miao <eric.miao@marvell.com> + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/sysdev.h> + +#include <plat/mfp.h> + +#define MFPR_SIZE (PAGE_SIZE) + +/* MFPR register bit definitions */ +#define MFPR_PULL_SEL (0x1 << 15) +#define MFPR_PULLUP_EN (0x1 << 14) +#define MFPR_PULLDOWN_EN (0x1 << 13) +#define MFPR_SLEEP_SEL (0x1 << 9) +#define MFPR_SLEEP_OE_N (0x1 << 7) +#define MFPR_EDGE_CLEAR (0x1 << 6) +#define MFPR_EDGE_FALL_EN (0x1 << 5) +#define MFPR_EDGE_RISE_EN (0x1 << 4) + +#define MFPR_SLEEP_DATA(x) ((x) << 8) +#define MFPR_DRIVE(x) (((x) & 0x7) << 10) +#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) + +#define MFPR_EDGE_NONE (0) +#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) +#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) +#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) + +/* + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFPR_LPM_INPUT (0) +#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) +#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) +#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) +#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) +#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) +#define MFPR_LPM_MASK (0xe080) + +/* + * The pullup and pulldown state of the MFP pin at run mode is by default + * determined by the selected alternate function. In case that some buggy + * devices need to override this default behavior, the definitions below + * indicates the setting of corresponding MFPR bits + * + * Definition pull_sel pullup_en pulldown_en + * MFPR_PULL_NONE 0 0 0 + * MFPR_PULL_LOW 1 0 1 + * MFPR_PULL_HIGH 1 1 0 + * MFPR_PULL_BOTH 1 1 1 + */ +#define MFPR_PULL_NONE (0) +#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) +#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) +#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) + +/* mfp_spin_lock is used to ensure that MFP register configuration + * (most likely a read-modify-write operation) is atomic, and that + * mfp_table[] is consistent + */ +static DEFINE_SPINLOCK(mfp_spin_lock); + +static void __iomem *mfpr_mmio_base; + +struct mfp_pin { + unsigned long config; /* -1 for not configured */ + unsigned long mfpr_off; /* MFPRxx Register offset */ + unsigned long mfpr_run; /* Run-Mode Register Value */ + unsigned long mfpr_lpm; /* Low Power Mode Register Value */ +}; + +static struct mfp_pin mfp_table[MFP_PIN_MAX]; + +/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ +static const unsigned long mfpr_lpm[] = { + MFPR_LPM_INPUT, + MFPR_LPM_DRIVE_LOW, + MFPR_LPM_DRIVE_HIGH, + MFPR_LPM_PULL_LOW, + MFPR_LPM_PULL_HIGH, + MFPR_LPM_FLOAT, +}; + +/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ +static const unsigned long mfpr_pull[] = { + MFPR_PULL_NONE, + MFPR_PULL_LOW, + MFPR_PULL_HIGH, + MFPR_PULL_BOTH, +}; + +/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ +static const unsigned long mfpr_edge[] = { + MFPR_EDGE_NONE, + MFPR_EDGE_RISE, + MFPR_EDGE_FALL, + MFPR_EDGE_BOTH, +}; + +#define mfpr_readl(off) \ + __raw_readl(mfpr_mmio_base + (off)) + +#define mfpr_writel(off, val) \ + __raw_writel(val, mfpr_mmio_base + (off)) + +#define mfp_configured(p) ((p)->config != -1) + +/* + * perform a read-back of any MFPR register to make sure the + * previous writings are finished + */ +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) + +static inline void __mfp_config_run(struct mfp_pin *p) +{ + if (mfp_configured(p)) + mfpr_writel(p->mfpr_off, p->mfpr_run); +} + +static inline void __mfp_config_lpm(struct mfp_pin *p) +{ + if (mfp_configured(p)) { + unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR; + if (mfpr_clr != p->mfpr_run) + mfpr_writel(p->mfpr_off, mfpr_clr); + if (p->mfpr_lpm != mfpr_clr) + mfpr_writel(p->mfpr_off, p->mfpr_lpm); + } +} + +void mfp_config(unsigned long *mfp_cfgs, int num) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&mfp_spin_lock, flags); + + for (i = 0; i < num; i++, mfp_cfgs++) { + unsigned long tmp, c = *mfp_cfgs; + struct mfp_pin *p; + int pin, af, drv, lpm, edge, pull; + + pin = MFP_PIN(c); + BUG_ON(pin >= MFP_PIN_MAX); + p = &mfp_table[pin]; + + af = MFP_AF(c); + drv = MFP_DS(c); + lpm = MFP_LPM_STATE(c); + edge = MFP_LPM_EDGE(c); + pull = MFP_PULL(c); + + /* run-mode pull settings will conflict with MFPR bits of + * low power mode state, calculate mfpr_run and mfpr_lpm + * individually if pull != MFP_PULL_NONE + */ + tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv); + + if (likely(pull == MFP_PULL_NONE)) { + p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_lpm = p->mfpr_run; + } else { + p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_run = tmp | mfpr_pull[pull]; + } + + p->config = c; __mfp_config_run(p); + } + + mfpr_sync(); + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +unsigned long mfp_read(int mfp) +{ + unsigned long val, flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + val = mfpr_readl(mfp_table[mfp].mfpr_off); + spin_unlock_irqrestore(&mfp_spin_lock, flags); + + return val; +} + +void mfp_write(int mfp, unsigned long val) +{ + unsigned long flags; + + BUG_ON(mfp >= MFP_PIN_MAX); + + spin_lock_irqsave(&mfp_spin_lock, flags); + mfpr_writel(mfp_table[mfp].mfpr_off, val); + mfpr_sync(); + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void __init mfp_init_base(unsigned long mfpr_base) +{ + int i; + + /* initialize the table with default - unconfigured */ + for (i = 0; i < ARRAY_SIZE(mfp_table); i++) + mfp_table[i].config = -1; + + mfpr_mmio_base = (void __iomem *)mfpr_base; +} + +void __init mfp_init_addr(struct mfp_addr_map *map) +{ + struct mfp_addr_map *p; + unsigned long offset, flags; + int i; + + spin_lock_irqsave(&mfp_spin_lock, flags); + + for (p = map; p->start != MFP_PIN_INVALID; p++) { + offset = p->offset; + i = p->start; + + do { + mfp_table[i].mfpr_off = offset; + mfp_table[i].mfpr_run = 0; + mfp_table[i].mfpr_lpm = 0; + offset += 4; i++; + } while ((i <= p->end) && (p->end != -1)); + } + + spin_unlock_irqrestore(&mfp_spin_lock, flags); +} + +void mfp_config_lpm(void) +{ + struct mfp_pin *p = &mfp_table[0]; + int pin; + + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++) + __mfp_config_lpm(p); +} + +void mfp_config_run(void) +{ + struct mfp_pin *p = &mfp_table[0]; + int pin; + + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++) + __mfp_config_run(p); +} diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 39195f972d5..8d7815d25a5 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -18,6 +18,11 @@ obj-y += pwm-clock.o obj-y += gpio.o obj-y += gpio-config.o +# PM support + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o + # devices obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/plat-s3c/include/plat/audio.h index de0e8da48bc..de0e8da48bc 100644 --- a/arch/arm/mach-s3c2410/include/mach/audio.h +++ b/arch/arm/plat-s3c/include/plat/audio.h diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h new file mode 100644 index 00000000000..3779775133a --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -0,0 +1,174 @@ +/* linux/include/asm-arm/plat-s3c24xx/pm.h + * + * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Written by Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* s3c_pm_init + * + * called from board at initialisation time to setup the power + * management +*/ + +#ifdef CONFIG_PM + +extern __init int s3c_pm_init(void); + +#else + +static inline int s3c_pm_init(void) +{ + return 0; +} +#endif + +/* configuration for the IRQ mask over sleep */ +extern unsigned long s3c_irqwake_intmask; +extern unsigned long s3c_irqwake_eintmask; + +/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ +extern unsigned long s3c_irqwake_intallow; +extern unsigned long s3c_irqwake_eintallow; + +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + +/* Flags for PM Control */ + +extern unsigned long s3c_pm_flags; + +/* from sleep.S */ + +extern int s3c_cpu_save(unsigned long *saveblk); +extern void s3c_cpu_resume(void); + +extern void s3c2410_cpu_suspend(void); + +extern unsigned long s3c_sleep_save_phys; + +/* sleep save info */ + +/** + * struct sleep_save - save information for shared peripherals. + * @reg: Pointer to the register to save. + * @val: Holder for the value saved from reg. + * + * This describes a list of registers which is used by the pm core and + * other subsystem to save and restore register values over suspend. + */ +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; +}; + +/* helper functions to save/restore lists of registers. */ + +extern void s3c_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c_irqext_wake(unsigned int irqno, unsigned int state); +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c_irqext_wake NULL +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif + +/* PM debug functions */ + +#ifdef CONFIG_S3C2410_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) +#else +#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) +#endif + +/* suspend memory checking */ + +#ifdef CONFIG_S3C2410_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while(0) +#define s3c_pm_check_restore() do { } while(0) +#define s3c_pm_check_cleanup() do { } while(0) +#define s3c_pm_check_store() do { } while(0) +#endif + +/** + * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ + * + * Setup all the necessary GPIO pins for waking the system on external + * interrupt. + */ +extern void s3c_pm_configure_extint(void); + +/** + * s3c_pm_restore_gpios() - restore the state of the gpios after sleep. + * + * Restore the state of the GPIO pins after sleep, which may involve ensuring + * that we do not glitch the state of the pins from that the bootloader's + * resume code has done. +*/ +extern void s3c_pm_restore_gpios(void); + +/** + * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. + * + * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios(). + */ +extern void s3c_pm_save_gpios(void); + +/** + * s3c_pm_cb_flushcache - callback for assembly code + * + * Callback to issue flush_cache_all() as this call is + * not a directly callable object. + */ +extern void s3c_pm_cb_flushcache(void); + +extern void s3c_pm_save_core(void); +extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h new file mode 100644 index 00000000000..0fad7571030 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h @@ -0,0 +1,75 @@ +/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h + * + * Copyright 2007 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H +#define __ASM_ARCH_REGS_S3C2412_IIS_H + +#define S3C2412_IISCON (0x00) +#define S3C2412_IISMOD (0x04) +#define S3C2412_IISFIC (0x08) +#define S3C2412_IISPSR (0x0C) +#define S3C2412_IISTXD (0x10) +#define S3C2412_IISRXD (0x14) + +#define S3C2412_IISCON_LRINDEX (1 << 11) +#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) +#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) +#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) +#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) +#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) +#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) +#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) +#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) +#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) +#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) +#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) + +#define S3C64XX_IISMOD_IMS_PCLK (0 << 10) +#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) + +#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) +#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) +#define S3C2412_IISMOD_SLAVE (2 << 10) +#define S3C2412_IISMOD_MASTER_MASK (3 << 10) +#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) +#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) +#define S3C2412_IISMOD_MODE_TXRX (2 << 8) +#define S3C2412_IISMOD_MODE_MASK (3 << 8) +#define S3C2412_IISMOD_LR_LLOW (0 << 7) +#define S3C2412_IISMOD_LR_RLOW (1 << 7) +#define S3C2412_IISMOD_SDF_IIS (0 << 5) +#define S3C2412_IISMOD_SDF_MSB (1 << 5) +#define S3C2412_IISMOD_SDF_LSB (2 << 5) +#define S3C2412_IISMOD_SDF_MASK (3 << 5) +#define S3C2412_IISMOD_RCLK_256FS (0 << 3) +#define S3C2412_IISMOD_RCLK_512FS (1 << 3) +#define S3C2412_IISMOD_RCLK_384FS (2 << 3) +#define S3C2412_IISMOD_RCLK_768FS (3 << 3) +#define S3C2412_IISMOD_RCLK_MASK (3 << 3) +#define S3C2412_IISMOD_BCLK_32FS (0 << 1) +#define S3C2412_IISMOD_BCLK_48FS (1 << 1) +#define S3C2412_IISMOD_BCLK_16FS (2 << 1) +#define S3C2412_IISMOD_BCLK_24FS (3 << 1) +#define S3C2412_IISMOD_BCLK_MASK (3 << 1) +#define S3C2412_IISMOD_8BIT (1 << 0) + +#define S3C2412_IISPSR_PSREN (1 << 15) + +#define S3C2412_IISFIC_TXFLUSH (1 << 15) +#define S3C2412_IISFIC_RXFLUSH (1 << 7) +#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) + + + +#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ + diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h index 6061de87f22..dc66a477f62 100644 --- a/arch/arm/plat-s3c/include/plat/uncompress.h +++ b/arch/arm/plat-s3c/include/plat/uncompress.h @@ -90,7 +90,10 @@ static inline void flush(void) { } -#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) +#define __raw_writel(d, ad) \ + do { \ + *((volatile unsigned int __force *)(ad)) = (d); \ + } while (0) /* CONFIG_S3C_BOOT_WATCHDOG * diff --git a/arch/arm/mach-s3c2410/include/mach/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h index cd91d1591f3..822c87fe948 100644 --- a/arch/arm/mach-s3c2410/include/mach/usb-control.h +++ b/arch/arm/plat-s3c/include/plat/usb-control.h @@ -1,9 +1,9 @@ -/* arch/arm/mach-s3c2410/include/mach/usb-control.h +/* arch/arm/plat-s3c/include/plat/usb-control.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 - usb port information + * S3C - USB host port information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,7 +11,7 @@ */ #ifndef __ASM_ARCH_USBCONTROL_H -#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h" +#define __ASM_ARCH_USBCONTROL_H #define S3C_HCDFLG_USED (1) diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c new file mode 100644 index 00000000000..39f2555564d --- /dev/null +++ b/arch/arm/plat-s3c/pm-check.c @@ -0,0 +1,242 @@ +/* linux/arch/arm/plat-s3c/pm-check.c + * originally in linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004,2006,2008 Simtec Electronics + * http://armlinux.simtec.co.uk + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Power Mangament - suspend/resume memory corruptiuon check. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/init.h> +#include <linux/crc32.h> +#include <linux/ioport.h> + +#include <plat/pm.h> + +#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#endif + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c_pm_run_res + * + * go through the given resource list, and look for system ram +*/ + +static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_MEM) && + strcmp(ptr->name, "System RAM") == 0) { + S3C_PMDBG("Found system RAM at %08lx..%08lx\n", + (unsigned long)ptr->start, + (unsigned long)ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)(res->end - res->start)+1; + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", + (unsigned long)res->start, (unsigned long)res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +void s3c_pm_check_prepare(void) +{ + crc_size = 0; + + s3c_pm_run_sysram(s3c_pm_countram, &crc_size); + + S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +void s3c_pm_check_store(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contains the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +/** + * s3c_pm_runcheck() - helper to check a resource on restore. + * @res: The resource to check + * @vak: Pointer to list of CRC32 values to check. + * + * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this + * function runs the given memory resource checking it against the stored + * CRC to ensure that memory is restored. The function tries to skip as + * many of the areas used during the suspend process. + */ +static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) +{ + void *save_at = phys_to_virt(s3c_sleep_save_phys); + unsigned long addr; + unsigned long left; + void *stkpage; + void *ptr; + u32 calc; + + stkpage = (void *)((u32)&calc & ~PAGE_MASK); + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, stkpage, 4096)) { + S3C_PMDBG("skipping %08lx, has stack in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, crcs, crc_size)) { + S3C_PMDBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, save_at, 32*4 )) { + S3C_PMDBG("skipping %08lx, has save block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/** + * s3c_pm_check_restore() - memory check called on resume + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ +void s3c_pm_check_restore(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_runcheck, crcs); +} + +/** + * s3c_pm_check_cleanup() - free memory resources + * + * Free the resources that where allocated by the suspend + * memory check code. We do this separately from the + * s3c_pm_check_restore() function as we cannot call any + * functions that might sleep during that resume. + */ +void s3c_pm_check_cleanup(void) +{ + kfree(crcs); + crcs = NULL; +} + diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c new file mode 100644 index 00000000000..061182ca66e --- /dev/null +++ b/arch/arm/plat-s3c/pm.c @@ -0,0 +1,363 @@ +/* linux/arch/arm/plat-s3c/pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2004,2006,2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C common power management (suspend to ram) support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <mach/hardware.h> + +#include <plat/regs-serial.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/regs-mem.h> +#include <mach/regs-irq.h> +#include <asm/irq.h> + +#include <plat/pm.h> +#include <plat/pm-core.h> + +/* for external use */ + +unsigned long s3c_pm_flags; + +/* Debug code: + * + * This code supports debug output to the low level UARTs for use on + * resume before the console layer is available. +*/ + +#ifdef CONFIG_S3C2410_PM_DEBUG +extern void printascii(const char *); + +void s3c_pm_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +static inline void s3c_pm_debug_init(void) +{ + /* restart uart clocks so we can use them to output */ + s3c_pm_debug_init_uart(); +} + +#else +#define s3c_pm_debug_init() do { } while(0) + +#endif /* CONFIG_S3C2410_PM_DEBUG */ + +/* Save the UART configurations if we are configured for debug. */ + +#ifdef CONFIG_S3C2410_PM_DEBUG + +struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; + +static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + save->ulcon = __raw_readl(regs + S3C2410_ULCON); + save->ucon = __raw_readl(regs + S3C2410_UCON); + save->ufcon = __raw_readl(regs + S3C2410_UFCON); + save->umcon = __raw_readl(regs + S3C2410_UMCON); + save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV); +} + +static void s3c_pm_save_uarts(void) +{ + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_save_uart(uart, save); +} + +static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + __raw_writel(save->ulcon, regs + S3C2410_ULCON); + __raw_writel(save->ucon, regs + S3C2410_UCON); + __raw_writel(save->ufcon, regs + S3C2410_UFCON); + __raw_writel(save->umcon, regs + S3C2410_UMCON); + __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV); +} + +static void s3c_pm_restore_uarts(void) +{ + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_restore_uart(uart, save); +} +#else +static void s3c_pm_save_uarts(void) { } +static void s3c_pm_restore_uarts(void) { } +#endif + +/* The IRQ ext-int code goes here, it is too small to currently bother + * with its own file. */ + +unsigned long s3c_irqwake_intmask = 0xffffffffL; +unsigned long s3c_irqwake_eintmask = 0xffffffffL; + +int s3c_irqext_wake(unsigned int irqno, unsigned int state) +{ + unsigned long bit = 1L << IRQ_EINT_BIT(irqno); + + if (!(s3c_irqwake_eintallow & bit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_eintmask |= bit; + else + s3c_irqwake_eintmask &= ~bit; + + return 0; +} + +/* helper functions to save and restore register state */ + +/** + * s3c_pm_do_save() - save a set of registers for restoration on resume. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Run through the list of registers given, saving their contents in the + * array for later restoration when we wakeup. + */ +void s3c_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = __raw_readl(ptr->reg); + S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/** + * s3c_pm_do_restore() - restore register values from the save list. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Restore the register values saved from s3c_pm_do_save(). + * + * Note, we do not use S3C_PMDBG() in here, as the system may not have + * restore the UARTs state yet +*/ + +void s3c_pm_do_restore(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", + ptr->reg, ptr->val, __raw_readl(ptr->reg)); + + __raw_writel(ptr->val, ptr->reg); + } +} + +/** + * s3c_pm_do_restore_core() - early restore register values from save list. + * + * This is similar to s3c_pm_do_restore() except we try and minimise the + * side effects of the function in case registers that hardware might need + * to work has been restored. + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) + __raw_writel(ptr->val, ptr->reg); +} + +/* s3c2410_pm_show_resume_irqs + * + * print any IRQs asserted at resume time (ie, we woke from) +*/ +static void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask) +{ + int i; + + which &= ~mask; + + for (i = 0; i <= 31; i++) { + if (which & (1L<<i)) { + S3C_PMDBG("IRQ %d asserted at resume\n", start+i); + } + } +} + + +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + +#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) + +/* s3c_pm_enter + * + * central control for sleep/resume process +*/ + +static int s3c_pm_enter(suspend_state_t state) +{ + static unsigned long regs_save[16]; + + /* ensure the debug is initialised (if enabled) */ + + s3c_pm_debug_init(); + + S3C_PMDBG("%s(%d)\n", __func__, state); + + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__); + return -EINVAL; + } + + /* check if we have anything to wake-up with... bad things seem + * to happen if you suspend with no wakeup (system will often + * require a full power-cycle) + */ + + if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { + printk(KERN_ERR "%s: No wake-up sources!\n", __func__); + printk(KERN_ERR "%s: Aborting sleep\n", __func__); + return -EINVAL; + } + + /* store the physical address of the register recovery block */ + + s3c_sleep_save_phys = virt_to_phys(regs_save); + + S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys); + + /* save all necessary core registers not covered by the drivers */ + + s3c_pm_save_gpios(); + s3c_pm_save_uarts(); + s3c_pm_save_core(); + + /* set the irq configuration for wake */ + + s3c_pm_configure_extint(); + + S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n", + s3c_irqwake_intmask, s3c_irqwake_eintmask); + + s3c_pm_arch_prepare_irqs(); + + /* call cpu specific preparation */ + + pm_cpu_prep(); + + /* flush cache back to ram */ + + flush_cache_all(); + + s3c_pm_check_store(); + + /* send the cpu to sleep... */ + + s3c_pm_arch_stop_clocks(); + + /* s3c_cpu_save will also act as our return point from when + * we resume as it saves its own register state and restores it + * during the resume. */ + + s3c_cpu_save(regs_save); + + /* restore the cpu state using the kernel's cpu init code. */ + + cpu_init(); + + /* restore the system state */ + + s3c_pm_restore_core(); + s3c_pm_restore_uarts(); + s3c_pm_restore_gpios(); + + s3c_pm_debug_init(); + + /* check what irq (if any) restored the system */ + + s3c_pm_arch_show_resume_irqs(); + + S3C_PMDBG("%s: post sleep, preparing to return\n", __func__); + + s3c_pm_check_restore(); + + /* ok, let's return from sleep */ + + S3C_PMDBG("S3C PM Resume (post-restore)\n"); + return 0; +} + +/* callback from assembly code */ +void s3c_pm_cb_flushcache(void) +{ + flush_cache_all(); +} + +static int s3c_pm_prepare(void) +{ + /* prepare check area if configured */ + + s3c_pm_check_prepare(); + return 0; +} + +static void s3c_pm_finish(void) +{ + s3c_pm_check_cleanup(); +} + +static struct platform_suspend_ops s3c_pm_ops = { + .enter = s3c_pm_enter, + .prepare = s3c_pm_prepare, + .finish = s3c_pm_finish, + .valid = suspend_valid_only_mem, +}; + +/* s3c_pm_init + * + * Attach the power management functions. This should be called + * from the board specific initialisation if the board supports + * it. +*/ + +int __init s3c_pm_init(void) +{ + printk("S3C Power Management, Copyright 2004 Simtec Electronics\n"); + + suspend_set_ops(&s3c_pm_ops); + return 0; +} diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 1e0767b266b..636cb12711d 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 3d4837021ac..1a8347cec20 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -201,5 +201,5 @@ void __init smdk_machine_init(void) platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); - s3c2410_pm_init(); + s3c_pm_init(); } diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 542062f8cbc..1932b7e0da1 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -182,7 +182,7 @@ static unsigned long s3c24xx_read_idcode_v4(void) * with the caches enabled. It seems at least the S3C2440 has a problem * resetting if there is bus activity interrupted by the reset. */ -static void s3c24xx_pm_restart(char mode) +static void s3c24xx_pm_restart(char mode, const char *cmd) { if (mode != 's') { unsigned long flags; @@ -191,12 +191,12 @@ static void s3c24xx_pm_restart(char mode) __cpuc_flush_kern_all(); __cpuc_flush_user_all(); - arch_reset(mode); + arch_reset(mode, cmd); local_irq_restore(flags); } /* fallback, or unhandled */ - arm_machine_restart(mode); + arm_machine_restart(mode, cmd); } void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h index 45746a99534..69e1be8bec3 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-s3c24xx/include/plat/irq.h @@ -10,6 +10,12 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> + #define irqdbf(x...) #define irqdbf2(x...) diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index fef8ea8b8e1..eed8f78e759 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -31,6 +31,8 @@ #define S3C24XX_SZ_UART SZ_1M #define S3C_UART_OFFSET (0x4000) +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + /* Timers */ #define S3C24XX_VA_TIMER S3C_VA_TIMER #define S3C2410_PA_TIMER (0x51000000) diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h new file mode 100644 index 00000000000..c75882113e0 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h @@ -0,0 +1,59 @@ +/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +static inline void s3c_pm_debug_init_uart(void) +{ + unsigned long tmp = __raw_readl(S3C2410_CLKCON); + + /* re-start uart clocks */ + tmp |= S3C2410_CLKCON_UART0; + tmp |= S3C2410_CLKCON_UART1; + tmp |= S3C2410_CLKCON_UART2; + + __raw_writel(tmp, S3C2410_CLKCON); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); + __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); + + /* ack any outstanding external interrupts before we go to sleep */ + + __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ +} + +static void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask); + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n", + __raw_readl(S3C2410_SRCPND), + __raw_readl(S3C2410_EINTPEND)); + + s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), + s3c_irqwake_intmask); + + s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), + s3c_irqwake_eintmask); +} diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h deleted file mode 100644 index cc623667e48..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/pm.h +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/pm.h - * - * Copyright (c) 2004 Simtec Electronics - * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* s3c2410_pm_init - * - * called from board at initialisation time to setup the power - * management -*/ - -#ifdef CONFIG_PM - -extern __init int s3c2410_pm_init(void); - -#else - -static inline int s3c2410_pm_init(void) -{ - return 0; -} -#endif - -/* configuration for the IRQ mask over sleep */ -extern unsigned long s3c_irqwake_intmask; -extern unsigned long s3c_irqwake_eintmask; - -/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ -extern unsigned long s3c_irqwake_intallow; -extern unsigned long s3c_irqwake_eintallow; - -/* per-cpu sleep functions */ - -extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); - -/* Flags for PM Control */ - -extern unsigned long s3c_pm_flags; - -/* from sleep.S */ - -extern int s3c2410_cpu_save(unsigned long *saveblk); -extern void s3c2410_cpu_suspend(void); -extern void s3c2410_cpu_resume(void); - -extern unsigned long s3c2410_sleep_save_phys; - -/* sleep save info */ - -struct sleep_save { - void __iomem *reg; - unsigned long val; -}; - -#define SAVE_ITEM(x) \ - { .reg = (x) } - -extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); -extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); - -#ifdef CONFIG_PM -extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); -extern int s3c24xx_irq_resume(struct sys_device *dev); -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h new file mode 100644 index 00000000000..a6f1d5df13b --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h @@ -0,0 +1,77 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-iis.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_IIS_H +#define __ASM_ARCH_REGS_IIS_H + +#define S3C2410_IISCON (0x00) + +#define S3C2410_IISCON_LRINDEX (1<<8) +#define S3C2410_IISCON_TXFIFORDY (1<<7) +#define S3C2410_IISCON_RXFIFORDY (1<<6) +#define S3C2410_IISCON_TXDMAEN (1<<5) +#define S3C2410_IISCON_RXDMAEN (1<<4) +#define S3C2410_IISCON_TXIDLE (1<<3) +#define S3C2410_IISCON_RXIDLE (1<<2) +#define S3C2410_IISCON_PSCEN (1<<1) +#define S3C2410_IISCON_IISEN (1<<0) + +#define S3C2410_IISMOD (0x04) + +#define S3C2440_IISMOD_MPLL (1<<9) +#define S3C2410_IISMOD_SLAVE (1<<8) +#define S3C2410_IISMOD_NOXFER (0<<6) +#define S3C2410_IISMOD_RXMODE (1<<6) +#define S3C2410_IISMOD_TXMODE (2<<6) +#define S3C2410_IISMOD_TXRXMODE (3<<6) +#define S3C2410_IISMOD_LR_LLOW (0<<5) +#define S3C2410_IISMOD_LR_RLOW (1<<5) +#define S3C2410_IISMOD_IIS (0<<4) +#define S3C2410_IISMOD_MSB (1<<4) +#define S3C2410_IISMOD_8BIT (0<<3) +#define S3C2410_IISMOD_16BIT (1<<3) +#define S3C2410_IISMOD_BITMASK (1<<3) +#define S3C2410_IISMOD_256FS (0<<2) +#define S3C2410_IISMOD_384FS (1<<2) +#define S3C2410_IISMOD_16FS (0<<0) +#define S3C2410_IISMOD_32FS (1<<0) +#define S3C2410_IISMOD_48FS (2<<0) +#define S3C2410_IISMOD_FS_MASK (3<<0) + +#define S3C2410_IISPSR (0x08) +#define S3C2410_IISPSR_INTMASK (31<<5) +#define S3C2410_IISPSR_INTSHIFT (5) +#define S3C2410_IISPSR_EXTMASK (31<<0) +#define S3C2410_IISPSR_EXTSHFIT (0) + +#define S3C2410_IISFCON (0x0c) + +#define S3C2410_IISFCON_TXDMA (1<<15) +#define S3C2410_IISFCON_RXDMA (1<<14) +#define S3C2410_IISFCON_TXENABLE (1<<13) +#define S3C2410_IISFCON_RXENABLE (1<<12) +#define S3C2410_IISFCON_TXMASK (0x3f << 6) +#define S3C2410_IISFCON_TXSHIFT (6) +#define S3C2410_IISFCON_RXMASK (0x3f) +#define S3C2410_IISFCON_RXSHIFT (0) + +#define S3C2400_IISFCON_TXDMA (1<<11) +#define S3C2400_IISFCON_RXDMA (1<<10) +#define S3C2400_IISFCON_TXENABLE (1<<9) +#define S3C2400_IISFCON_RXENABLE (1<<8) +#define S3C2400_IISFCON_TXMASK (0x07 << 4) +#define S3C2400_IISFCON_TXSHIFT (4) +#define S3C2400_IISFCON_RXMASK (0x07) +#define S3C2400_IISFCON_RXSHIFT (0) + +#define S3C2410_IISFIFO (0x10) +#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c new file mode 100644 index 00000000000..b7acf1a8ecd --- /dev/null +++ b/arch/arm/plat-s3c24xx/irq-pm.c @@ -0,0 +1,95 @@ +/* linux/arch/arm/plat-s3c24xx/irq-om.c + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C24XX - IRQ PM code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ + +unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; +unsigned long s3c_irqwake_eintallow = 0x0000fff0L; + +int s3c_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long irqbit = 1 << (irqno - IRQ_EINT0); + + if (!(s3c_irqwake_intallow & irqbit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_intmask |= irqbit; + else + s3c_irqwake_intmask &= ~irqbit; + + return 0; +} + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C2410_INTMSK), + SAVE_ITEM(S3C2410_INTSUBMSK), +}; + +/* the extint values move between the s3c2410/s3c2440 and the s3c2412 + * so we use an array to hold them, and to calculate the address of + * the register at run-time +*/ + +static unsigned long save_extint[3]; +static unsigned long save_eintflt[4]; +static unsigned long save_eintmask; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); + + s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + save_eintmask = __raw_readl(S3C24XX_EINTMASK); + + return 0; +} + +int s3c24xx_irq_resume(struct sys_device *dev) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); + + s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + __raw_writel(save_eintmask, S3C24XX_EINTMASK); + + return 0; +} diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 0192ecdc144..958737775ad 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003,2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify @@ -16,38 +16,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog: - * - * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk> - * Fixed compile warnings - * - * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn> - * Fixed s3c_extirq_type - * - * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> - * Addition of ADC/TC demux - * - * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de> - * Fix for set_irq_type() on low EINT numbers - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Tidy up KF's patch and sort out new release - * - * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> - * Add support for power management controls - * - * 04-Nov-2004 Ben Dooks - * Fix standard IRQ wake for EINT0..4 and RTC - * - * 22-Feb-2005 Ben Dooks - * Fixed edge-triggering on ADC IRQ - * - * 28-Jun-2005 Ben Dooks - * Mark IRQ_LCD valid - * - * 25-Jul-2005 Ben Dooks - * Split the S3C2440 IRQ code to separate file */ #include <linux/init.h> @@ -55,81 +23,16 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/sysdev.h> -#include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> - #include <asm/mach/irq.h> #include <plat/regs-irqtype.h> -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> #include <plat/cpu.h> #include <plat/pm.h> #include <plat/irq.h> -/* wakeup irq control */ - -#ifdef CONFIG_PM - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; -unsigned long s3c_irqwake_intmask = 0xffffffffL; -unsigned long s3c_irqwake_eintallow = 0x0000fff0L; -unsigned long s3c_irqwake_eintmask = 0xffffffffL; - -int -s3c_irq_wake(unsigned int irqno, unsigned int state) -{ - unsigned long irqbit = 1 << (irqno - IRQ_EINT0); - - if (!(s3c_irqwake_intallow & irqbit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - - return 0; -} - -static int -s3c_irqext_wake(unsigned int irqno, unsigned int state) -{ - unsigned long bit = 1L << (irqno - EXTINT_OFF); - - if (!(s3c_irqwake_eintallow & bit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_eintmask |= bit; - else - s3c_irqwake_eintmask &= ~bit; - - return 0; -} - -#else -#define s3c_irqext_wake NULL -#define s3c_irq_wake NULL -#endif - - static void s3c_irq_mask(unsigned int irqno) { @@ -590,59 +493,6 @@ s3c_irq_demux_extint4t7(unsigned int irq, } } -#ifdef CONFIG_PM - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_INTMSK), - SAVE_ITEM(S3C2410_INTSUBMSK), -}; - -/* the extint values move between the s3c2410/s3c2440 and the s3c2412 - * so we use an array to hold them, and to calculate the address of - * the register at run-time -*/ - -static unsigned long save_extint[3]; -static unsigned long save_eintflt[4]; -static unsigned long save_eintmask; - -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - save_eintmask = __raw_readl(S3C24XX_EINTMASK); - - return 0; -} - -int s3c24xx_irq_resume(struct sys_device *dev) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); - - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - __raw_writel(save_eintmask, S3C24XX_EINTMASK); - - return 0; -} - -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif - /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 21dfa74773d..da0d3217d3e 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -61,7 +61,7 @@ static __init int pm_simtec_init(void) __raw_writel(gstatus4, S3C2410_GSTATUS4); - return s3c2410_pm_init(); + return s3c_pm_init(); } arch_initcall(pm_simtec_init); diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 34ef18e5b2a..062a29339a9 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -31,14 +31,9 @@ #include <linux/errno.h> #include <linux/time.h> #include <linux/interrupt.h> -#include <linux/crc32.h> -#include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/io.h> -#include <asm/cacheflush.h> -#include <mach/hardware.h> - #include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> @@ -49,10 +44,6 @@ #include <plat/pm.h> -/* for external use */ - -unsigned long s3c_pm_flags; - #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { @@ -120,328 +111,14 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; -#ifdef CONFIG_S3C2410_PM_DEBUG - -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C24XX_VA_UART0), - SAVE_UART(S3C24XX_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C24XX_VA_UART2), -#endif -}; - -/* debug - * - * we send the debug to printascii() to allow it to be seen if the - * system never wakes up from the sleep -*/ - -extern void printascii(const char *); - -void pm_dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -static void s3c2410_pm_debug_init(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - -#define DBG(fmt...) pm_dbg(fmt) -#else -#define DBG(fmt...) printk(KERN_DEBUG fmt) - -#define s3c2410_pm_debug_init() do { } while(0) - -static struct sleep_save uart_save[] = {}; -#endif - -#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 - -/* suspend checking code... - * - * this next area does a set of crc checks over all the installed - * memory, so the system can verify if the resume was ok. - * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, - * increasing it will mean that the area corrupted will be less easy to spot, - * and reducing the size will cause the CRC save area to grow -*/ - -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) - -static u32 crc_size; /* size needed for the crc block */ -static u32 *crcs; /* allocated over suspend/resume */ - -typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); - -/* s3c2410_pm_run_res - * - * go thorugh the given resource list, and look for system ram -*/ - -static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) -{ - while (ptr != NULL) { - if (ptr->child != NULL) - s3c2410_pm_run_res(ptr->child, fn, arg); - - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { - DBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); - arg = (fn)(ptr, arg); - } - - ptr = ptr->sibling; - } -} - -static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) -{ - s3c2410_pm_run_res(&iomem_resource, fn, arg); -} - -static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) -{ - u32 size = (u32)(res->end - res->start)+1; - - size += CHECK_CHUNKSIZE-1; - size /= CHECK_CHUNKSIZE; - - DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); - - *val += size * sizeof(u32); - return val; -} - -/* s3c2410_pm_prepare_check - * - * prepare the necessary information for creating the CRCs. This - * must be done before the final save, as it will require memory - * allocating, and thus touching bits of the kernel we do not - * know about. -*/ - -static void s3c2410_pm_check_prepare(void) -{ - crc_size = 0; - - s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); - - DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); - - crcs = kmalloc(crc_size+4, GFP_KERNEL); - if (crcs == NULL) - printk(KERN_ERR "Cannot allocated CRC save area\n"); -} - -static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) -{ - unsigned long addr, left; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - *val = crc32_le(~0, phys_to_virt(addr), left); - val++; - } - - return val; -} - -/* s3c2410_pm_check_store - * - * compute the CRC values for the memory blocks before the final - * sleep. -*/ - -static void s3c2410_pm_check_store(void) -{ - if (crcs != NULL) - s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); -} - -/* in_region - * - * return TRUE if the area defined by ptr..ptr+size contatins the - * what..what+whatsz -*/ - -static inline int in_region(void *ptr, int size, void *what, size_t whatsz) -{ - if ((what+whatsz) < ptr) - return 0; - - if (what > (ptr+size)) - return 0; - - return 1; -} - -static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) -{ - void *save_at = phys_to_virt(s3c2410_sleep_save_phys); - unsigned long addr; - unsigned long left; - void *ptr; - u32 calc; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - ptr = phys_to_virt(addr); - - if (in_region(ptr, left, crcs, crc_size)) { - DBG("skipping %08lx, has crc block in\n", addr); - goto skip_check; - } - - if (in_region(ptr, left, save_at, 32*4 )) { - DBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - - /* calculate and check the checksum */ - - calc = crc32_le(~0, ptr, left); - if (calc != *val) { - printk(KERN_ERR PFX "Restore CRC error at " - "%08lx (%08x vs %08x)\n", addr, calc, *val); - - DBG("Restore CRC error at %08lx (%08x vs %08x)\n", - addr, calc, *val); - } - - skip_check: - val++; - } - - return val; -} - -/* s3c2410_pm_check_restore - * - * check the CRCs after the restore event and free the memory used - * to hold them -*/ - -static void s3c2410_pm_check_restore(void) -{ - if (crcs != NULL) { - s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } -} - -#else - -#define s3c2410_pm_check_prepare() do { } while(0) -#define s3c2410_pm_check_restore() do { } while(0) -#define s3c2410_pm_check_store() do { } while(0) -#endif - -/* helper functions to save and restore register state */ - -void s3c2410_pm_do_save(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); - DBG("saved %p value %08lx\n", ptr->reg, ptr->val); - } -} - -/* s3c2410_pm_do_restore - * - * restore the system from the given list of saved registers - * - * Note, we do not use DBG() in here, as the system may not have - * restore the UARTs state yet -*/ - -void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); - } -} - -/* s3c2410_pm_do_restore_core - * - * similar to s3c2410_pm_do_restore_core - * - * WARNING: Do not put any debug in here that may effect memory or use - * peripherals, as things may be changing! -*/ - -static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - __raw_writel(ptr->val, ptr->reg); - } -} -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ - -static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) -{ - int i; - - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if ((which) & (1L<<i)) { - DBG("IRQ %d asserted at resume\n", start+i); - } - } -} - -/* s3c2410_pm_check_resume_pin +/* s3c_pm_check_resume_pin * * check to see if the pin is configured correctly for sleep mode, and * make any necessary adjustments if it is not */ -static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) { unsigned long irqstate; unsigned long pinstate; @@ -456,21 +133,21 @@ static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) if (!irqstate) { if (pinstate == S3C2410_GPIO_IRQ) - DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); + S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); } else { if (pinstate == S3C2410_GPIO_IRQ) { - DBG("Disabling IRQ %d (pin %d)\n", irq, pin); + S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin); s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); } } } -/* s3c2410_pm_configure_extint +/* s3c_pm_configure_extint * * configure all external interrupt pins */ -static void s3c2410_pm_configure_extint(void) +void s3c_pm_configure_extint(void) { int pin; @@ -480,11 +157,11 @@ static void s3c2410_pm_configure_extint(void) */ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); + s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0); } for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); } } @@ -494,12 +171,12 @@ static void s3c2410_pm_configure_extint(void) #define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON) #define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON) -/* s3c2410_pm_save_gpios() +/* s3c_pm_save_gpios() * * Save the state of the GPIOs */ -static void s3c2410_pm_save_gpios(void) +void s3c_pm_save_gpios(void) { struct gpio_sleep *gps = gpio_save; unsigned int gpio; @@ -538,7 +215,10 @@ static inline int is_out(unsigned long con) return con == 1; } -/* s3c2410_pm_restore_gpio() +/** + * s3c2410_pm_restore_gpio() - restore the given GPIO bank + * @index: The number of the GPIO bank being resumed. + * @gps: The sleep confgiuration for the bank. * * Restore one of the GPIO banks that was saved during suspend. This is * not as simple as once thought, due to the possibility of glitches @@ -646,8 +326,8 @@ static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) __raw_writel(gps->gpup, base + OFFS_UP); } - DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", - index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); + S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", + index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } @@ -656,7 +336,7 @@ static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) * Restore the state of the GPIOs */ -static void s3c2410_pm_restore_gpios(void) +void s3c_pm_restore_gpios(void) { struct gpio_sleep *gps = gpio_save; int gpio; @@ -666,150 +346,15 @@ static void s3c2410_pm_restore_gpios(void) } } -void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); - -#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) - -/* s3c2410_pm_enter - * - * central control for sleep/resume process -*/ - -static int s3c2410_pm_enter(suspend_state_t state) +void s3c_pm_restore_core(void) { - unsigned long regs_save[16]; - - /* ensure the debug is initialised (if enabled) */ - - s3c2410_pm_debug_init(); - - DBG("s3c2410_pm_enter(%d)\n", state); - - if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { - printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); - return -EINVAL; - } - - /* check if we have anything to wake-up with... bad things seem - * to happen if you suspend with no wakeup (system will often - * require a full power-cycle) - */ - - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && - !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { - printk(KERN_ERR PFX "No sources enabled for wake-up!\n"); - printk(KERN_ERR PFX "Aborting sleep\n"); - return -EINVAL; - } - - /* prepare check area if configured */ - - s3c2410_pm_check_prepare(); - - /* store the physical address of the register recovery block */ - - s3c2410_sleep_save_phys = virt_to_phys(regs_save); - - DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - - /* save all necessary core registers not covered by the drivers */ - - s3c2410_pm_save_gpios(); - s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); - s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); - - /* set the irq configuration for wake */ - - s3c2410_pm_configure_extint(); - - DBG("sleep: irq wakeup masks: %08lx,%08lx\n", - s3c_irqwake_intmask, s3c_irqwake_eintmask); - - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - - /* call cpu specific preparation */ - - pm_cpu_prep(); - - /* flush cache back to ram */ - - flush_cache_all(); - - s3c2410_pm_check_store(); - - /* send the cpu to sleep... */ - - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - - /* s3c2410_cpu_save will also act as our return point from when - * we resume as it saves its own register state, so use the return - * code to differentiate return from save and return from sleep */ - - if (s3c2410_cpu_save(regs_save) == 0) { - flush_cache_all(); - pm_cpu_sleep(); - } - - /* restore the cpu state */ - - cpu_init(); - - /* restore the system state */ - - s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); - s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); - s3c2410_pm_restore_gpios(); - - s3c2410_pm_debug_init(); - - /* check what irq (if any) restored the system */ - - DBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); - - DBG("post sleep, preparing to return\n"); - - s3c2410_pm_check_restore(); - - /* ok, let's return from sleep */ - - DBG("S3C2410 PM Resume (post-restore)\n"); - return 0; + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } -static struct platform_suspend_ops s3c2410_pm_ops = { - .enter = s3c2410_pm_enter, - .valid = suspend_valid_only_mem, -}; - -/* s3c2410_pm_init - * - * Attach the power management functions. This should be called - * from the board specific initialisation if the board supports - * it. -*/ - -int __init s3c2410_pm_init(void) +void s3c_pm_save_core(void) { - printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n"); - - suspend_set_ops(&s3c2410_pm_ops); - return 0; + s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } + diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index c1de6bb0101..1364317d421 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -145,13 +145,13 @@ static struct sleep_save s3c244x_sleep[] = { static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) { - s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); return 0; } static int s3c244x_resume(struct sys_device *dev) { - s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); return 0; } diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 76594b21280..e73e3b6e88d 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -41,25 +41,13 @@ .text - /* s3c2410_cpu_save - * - * save enough of the CPU state to allow us to re-start - * pm.c code. as we store items like the sp/lr, we will - * end up returning from this function when the cpu resumes - * so the return value is set to mark this. - * - * This arangement means we avoid having to flush the cache - * from this code. + /* s3c_cpu_save * * entry: - * r0 = pointer to save block - * - * exit: - * r0 = 0 => we stored everything - * 1 => resumed from sleep + * r0 = save address (virtual addr of s3c_sleep_save_phys) */ -ENTRY(s3c2410_cpu_save) +ENTRY(s3c_cpu_save) stmfd sp!, { r4 - r12, lr } @@ store co-processor registers @@ -71,20 +59,25 @@ ENTRY(s3c2410_cpu_save) stmia r0, { r4 - r13 } - mov r0, #0 - ldmfd sp, { r4 - r12, pc } + @@ write our state back to RAM + bl s3c_pm_cb_flushcache + @@ jump to final code to send system to sleep + ldr r0, =pm_cpu_sleep + @@ldr pc, [ r0 ] + ldr r0, [ r0 ] + mov pc, r0 + @@ return to the caller, after having the MMU @@ turned on, this restores the last bits from the @@ stack resume_with_mmu: - mov r0, #1 ldmfd sp!, { r4 - r12, pc } .ltorg @@ the next bits sit in the .data segment, even though they - @@ happen to be code... the s3c2410_sleep_save_phys needs to be + @@ happen to be code... the s3c_sleep_save_phys needs to be @@ accessed by the resume code before it can restore the MMU. @@ This means that the variable has to be close enough for the @@ code to read it... since the .text segment needs to be RO, @@ -92,19 +85,19 @@ resume_with_mmu: .data - .global s3c2410_sleep_save_phys -s3c2410_sleep_save_phys: + .global s3c_sleep_save_phys +s3c_sleep_save_phys: .word 0 /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the - * s3c2410_cpu_resume entry. + * s3c_cpu_resume entry. */ .word 0x2bedf00d - /* s3c2410_cpu_resume + /* s3c_cpu_resume * * resume code entry for bootloader to call * @@ -113,7 +106,7 @@ s3c2410_sleep_save_phys: * must not write to the code segment (code is read-only) */ -ENTRY(s3c2410_cpu_resume) +ENTRY(s3c_cpu_resume) mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE msr cpsr_c, r0 @@ -145,7 +138,7 @@ ENTRY(s3c2410_cpu_resume) mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches - ldr r0, s3c2410_sleep_save_phys @ address of restore block + ldr r0, s3c_sleep_save_phys @ address of restore block ldmia r0, { r4 - r13 } mcr p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c index fbde183a456..91f49a3a665 100644 --- a/arch/arm/plat-s3c64xx/cpu.c +++ b/arch/arm/plat-s3c64xx/cpu.c @@ -96,6 +96,11 @@ static struct map_desc s3c_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C64XX_PA_GPIO), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C64XX_VA_MODEM, + .pfn = __phys_to_pfn(S3C64XX_PA_MODEM), + .length = SZ_4K, + .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h new file mode 100644 index 00000000000..82342f6fd27 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIO memory port register definitions + */ + +#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H +#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__ + +#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0) +#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4) + +#define S3C64XX_MEM0CONSLP0 S3C64XX_GPIOREG(0x1C0) +#define S3C64XX_MEM0CONSLP1 S3C64XX_GPIOREG(0x1C4) +#define S3C64XX_MEM1CONSLP S3C64XX_GPIOREG(0x1C8) + +#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0) +#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4) + +#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */ + diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h index 75b873d8280..81f7f6e6832 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h @@ -13,23 +13,175 @@ /* Base addresses for each of the banks */ -#define S3C64XX_GPA_BASE (S3C64XX_VA_GPIO + 0x0000) -#define S3C64XX_GPB_BASE (S3C64XX_VA_GPIO + 0x0020) -#define S3C64XX_GPC_BASE (S3C64XX_VA_GPIO + 0x0040) -#define S3C64XX_GPD_BASE (S3C64XX_VA_GPIO + 0x0060) -#define S3C64XX_GPE_BASE (S3C64XX_VA_GPIO + 0x0080) -#define S3C64XX_GPF_BASE (S3C64XX_VA_GPIO + 0x00A0) -#define S3C64XX_GPG_BASE (S3C64XX_VA_GPIO + 0x00C0) -#define S3C64XX_GPH_BASE (S3C64XX_VA_GPIO + 0x00E0) -#define S3C64XX_GPI_BASE (S3C64XX_VA_GPIO + 0x0100) -#define S3C64XX_GPJ_BASE (S3C64XX_VA_GPIO + 0x0120) -#define S3C64XX_GPK_BASE (S3C64XX_VA_GPIO + 0x0800) -#define S3C64XX_GPL_BASE (S3C64XX_VA_GPIO + 0x0810) -#define S3C64XX_GPM_BASE (S3C64XX_VA_GPIO + 0x0820) -#define S3C64XX_GPN_BASE (S3C64XX_VA_GPIO + 0x0830) -#define S3C64XX_GPO_BASE (S3C64XX_VA_GPIO + 0x0140) -#define S3C64XX_GPP_BASE (S3C64XX_VA_GPIO + 0x0160) -#define S3C64XX_GPQ_BASE (S3C64XX_VA_GPIO + 0x0180) +#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg)) + +#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000) +#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020) +#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040) +#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060) +#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080) +#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0) +#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0) +#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0) +#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100) +#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120) +#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800) +#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810) +#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820) +#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830) +#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140) +#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160) +#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180) + +/* SPCON */ + +#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0) + +#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30) +#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30) +#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30) + +#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28) +#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28) +#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28) + +#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26) +#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26) +#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26) + +#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24) +#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24) +#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24) + +#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22) +#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22) +#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22) + +#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21) + +#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18) +#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18) + +#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16) +#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16) + +#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14) +#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14) +#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14) +#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14) +#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14) + +#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12) +#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12) +#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12) +#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12) +#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12) + +#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8) +#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8) +#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8) +#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8) +#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8) + +#define S3C64XX_SPCON_USBH_DMPD (1 << 7) +#define S3C64XX_SPCON_USBH_DPPD (1 << 6) +#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5) +#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4) +#define S3C64XX_SPCON_USBH_SUSPND (1 << 3) + +#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0) +#define S3C64XX_SPCON_LCD_SEL_SHIFT (0) +#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0) +#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0) +#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0) + + +/* External interrupt registers */ + +#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200) +#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204) +#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208) +#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C) +#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210) + +#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220) +#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224) +#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228) +#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C) +#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230) + +#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240) +#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244) +#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248) +#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C) +#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250) + +#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260) +#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264) +#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268) +#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C) +#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270) + +#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280) +#define S3C64XX_PRIORITY_ARB(x) (1 << (x)) + +#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284) +#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288) + +#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900) +#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904) +#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910) +#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914) +#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918) +#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C) + +#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920) +#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924) + +/* GPIO sleep configuration */ + +#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880) + +#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14) +#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5) + +#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12) +#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12) +#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12) +#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12) + +#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0) +#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0) +#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0) +#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0) + + +#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930) + +#define S3C64XX_SLPEN_USE_xSLP (1 << 0) +#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1) #endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/plat-s3c64xx/include/plat/regs-modem.h new file mode 100644 index 00000000000..49f7759dedf --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/regs-modem.h @@ -0,0 +1,31 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - modem block registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C64XX_REGS_MODEM_H +#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__ + +#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x)) + +#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0) +#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4) +#define S3C64XX_MODEM_MIFCON S3C64XX_MODEMREG(0x8) +#define S3C64XX_MODEM_MIFPCON S3C64XX_MODEMREG(0xC) +#define S3C64XX_MODEM_INTCLR S3C64XX_MODEMREG(0x10) +#define S3C64XX_MODEM_DMA_TXADDR S3C64XX_MODEMREG(0x14) +#define S3C64XX_MODEM_DMA_RXADDR S3C64XX_MODEMREG(0x18) + +#define MIFPCON_INT2M_LEVEL (1 << 4) +#define MIFPCON_LCD_BYPASS (1 << 3) + +#endif /* __PLAT_S3C64XX_REGS_MODEM_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h index d8ed8291709..69b78d9f83b 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h @@ -17,6 +17,10 @@ #define S3C_SYSREG(x) (S3C_VA_SYS + (x)) +#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100) +#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) +#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) + #define S3C64XX_OTHERS S3C_SYSREG(0x900) #define S3C64XX_OTHERS_USBMASK (1 << 16) diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h new file mode 100644 index 00000000000..270d96ac970 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h @@ -0,0 +1,116 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - syscon power and sleep control registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H +#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__ + +#define S3C64XX_PWR_CFG S3C_SYSREG(0x804) + +#define S3C64XX_PWRCFG_OSC_OTG_DISABLE (1 << 17) +#define S3C64XX_PWRCFG_MMC2_DISABLE (1 << 16) +#define S3C64XX_PWRCFG_MMC1_DISABLE (1 << 15) +#define S3C64XX_PWRCFG_MMC0_DISABLE (1 << 14) +#define S3C64XX_PWRCFG_HSI_DISABLE (1 << 13) +#define S3C64XX_PWRCFG_TS_DISABLE (1 << 12) +#define S3C64XX_PWRCFG_RTC_TICK_DISABLE (1 << 11) +#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE (1 << 10) +#define S3C64XX_PWRCFG_MSM_DISABLE (1 << 9) +#define S3C64XX_PWRCFG_KEY_DISABLE (1 << 8) +#define S3C64XX_PWRCFG_BATF_DISABLE (1 << 7) + +#define S3C64XX_PWRCFG_CFG_WFI_MASK (0x3 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_SHIFT (5) +#define S3C64XX_PWRCFG_CFG_WFI_IGNORE (0x0 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_IDLE (0x1 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_STOP (0x2 << 5) +#define S3C64XX_PWRCFG_CFG_WFI_SLEEP (0x3 << 5) + +#define S3C64XX_PWRCFG_CFG_BATFLT_MASK (0x3 << 3) +#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT (3) +#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE (0x0 << 3) +#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ (0x1 << 3) +#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP (0x3 << 3) + +#define S3C64XX_PWRCFG_CFG_BAT_WAKE (1 << 2) +#define S3C64XX_PWRCFG_OSC27_EN (1 << 0) + +#define S3C64XX_EINT_MASK S3C_SYSREG(0x808) + +#define S3C64XX_NORMAL_CFG S3C_SYSREG(0x810) + +#define S3C64XX_NORMALCFG_IROM_ON (1 << 30) +#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON (1 << 16) +#define S3C64XX_NORMALCFG_DOMAIN_S_ON (1 << 15) +#define S3C64XX_NORMALCFG_DOMAIN_F_ON (1 << 14) +#define S3C64XX_NORMALCFG_DOMAIN_P_ON (1 << 13) +#define S3C64XX_NORMALCFG_DOMAIN_I_ON (1 << 12) +#define S3C64XX_NORMALCFG_DOMAIN_G_ON (1 << 10) +#define S3C64XX_NORMALCFG_DOMAIN_V_ON (1 << 9) + +#define S3C64XX_STOP_CFG S3C_SYSREG(0x814) + +#define S3C64XX_STOPCFG_MEMORY_ARM_ON (1 << 29) +#define S3C64XX_STOPCFG_TOP_MEMORY_ON (1 << 20) +#define S3C64XX_STOPCFG_ARM_LOGIC_ON (1 << 17) +#define S3C64XX_STOPCFG_TOP_LOGIC_ON (1 << 8) +#define S3C64XX_STOPCFG_OSC_EN (1 << 0) + +#define S3C64XX_SLEEP_CFG S3C_SYSREG(0x818) + +#define S3C64XX_SLEEPCFG_OSC_EN (1 << 0) + +#define S3C64XX_STOP_MEM_CFG S3C_SYSREG(0x81c) + +#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN (1 << 6) +#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN (1 << 5) +#define S3C64XX_STOPMEMCFG_OTG_RETAIN (1 << 4) +#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN (1 << 3) +#define S3C64XX_STOPMEMCFG_IROM_RETAIN (1 << 2) +#define S3C64XX_STOPMEMCFG_IRDA_RETAIN (1 << 1) +#define S3C64XX_STOPMEMCFG_NFCON_RETAIN (1 << 0) + +#define S3C64XX_OSC_STABLE S3C_SYSREG(0x824) +#define S3C64XX_PWR_STABLE S3C_SYSREG(0x828) + +#define S3C64XX_WAKEUP_STAT S3C_SYSREG(0x908) + +#define S3C64XX_WAKEUPSTAT_MMC2 (1 << 11) +#define S3C64XX_WAKEUPSTAT_MMC1 (1 << 10) +#define S3C64XX_WAKEUPSTAT_MMC0 (1 << 9) +#define S3C64XX_WAKEUPSTAT_HSI (1 << 8) +#define S3C64XX_WAKEUPSTAT_BATFLT (1 << 6) +#define S3C64XX_WAKEUPSTAT_MSM (1 << 5) +#define S3C64XX_WAKEUPSTAT_KEY (1 << 4) +#define S3C64XX_WAKEUPSTAT_TS (1 << 3) +#define S3C64XX_WAKEUPSTAT_RTC_TICK (1 << 2) +#define S3C64XX_WAKEUPSTAT_RTC_ALARM (1 << 1) +#define S3C64XX_WAKEUPSTAT_EINT (1 << 0) + +#define S3C64XX_BLK_PWR_STAT S3C_SYSREG(0x90c) + +#define S3C64XX_BLKPWRSTAT_G (1 << 7) +#define S3C64XX_BLKPWRSTAT_ETM (1 << 6) +#define S3C64XX_BLKPWRSTAT_S (1 << 5) +#define S3C64XX_BLKPWRSTAT_F (1 << 4) +#define S3C64XX_BLKPWRSTAT_P (1 << 3) +#define S3C64XX_BLKPWRSTAT_I (1 << 2) +#define S3C64XX_BLKPWRSTAT_V (1 << 1) +#define S3C64XX_BLKPWRSTAT_TOP (1 << 0) + +#define S3C64XX_INFORM0 S3C_SYSREG(0xA00) +#define S3C64XX_INFORM1 S3C_SYSREG(0xA04) +#define S3C64XX_INFORM2 S3C_SYSREG(0xA08) +#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C) + +#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */ diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index cf524826c93..47e5155bb13 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -27,20 +27,6 @@ #include <mach/map.h> #include <plat/cpu.h> -/* GPIO is 0x7F008xxx, */ -#define S3C64XX_GPIOREG(x) (S3C64XX_VA_GPIO + (x)) - -#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900) -#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904) -#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910) -#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914) -#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918) -#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C) - -#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920) -#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924) - - #define eint_offset(irq) ((irq) - IRQ_EINT(0)) #define eint_irq_to_bit(irq) (1 << eint_offset(irq)) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index b4211d8b2ac..945e0d237a1 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Mar 12 18:01:45 2009 +# Last update: Mon Mar 23 20:09:01 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2124,3 +2124,11 @@ mx27wallace MACH_MX27WALLACE MX27WALLACE 2133 fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134 rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 smallogger MACH_SMALLOGGER SMALLOGGER 2136 +ccw9p9215 MACH_CCW9P9215 CCW9P9215 2137 +dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138 +ts219 MACH_TS219 TS219 2139 +tny_a9263 MACH_TNY_A9263 TNY_A9263 2140 +apollo MACH_APOLLO APOLLO 2141 +at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142 +spc300 MACH_SPC300 SPC300 2143 +eko MACH_EKO EKO 2144 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 8de86e4fead..c8c98dd44ad 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -377,6 +377,4 @@ struct op { u32 flags; }; -#if defined(CONFIG_SMP) || defined(CONFIG_PM) extern void vfp_save_state(void *location, u32 fpexc); -#endif diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index c92a08bd6a8..a5a4e57763c 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -172,7 +172,6 @@ process_exception: @ retry the faulted instruction ENDPROC(vfp_support_entry) -#if defined(CONFIG_SMP) || defined(CONFIG_PM) ENTRY(vfp_save_state) @ Save the current VFP state @ r0 - save location @@ -190,7 +189,6 @@ ENTRY(vfp_save_state) stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 mov pc, lr ENDPROC(vfp_save_state) -#endif last_VFP_context_address: .word last_VFP_context diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 9f476a1be2c..75457b30d81 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -377,6 +377,55 @@ static void vfp_pm_init(void) static inline void vfp_pm_init(void) { } #endif /* CONFIG_PM */ +/* + * Synchronise the hardware VFP state of a thread other than current with the + * saved one. This function is used by the ptrace mechanism. + */ +#ifdef CONFIG_SMP +void vfp_sync_state(struct thread_info *thread) +{ + /* + * On SMP systems, the VFP state is automatically saved at every + * context switch. We mark the thread VFP state as belonging to a + * non-existent CPU so that the saved one will be reloaded when + * needed. + */ + thread->vfpstate.hard.cpu = NR_CPUS; +} +#else +void vfp_sync_state(struct thread_info *thread) +{ + unsigned int cpu = get_cpu(); + u32 fpexc = fmrx(FPEXC); + + /* + * If VFP is enabled, the previous state was already saved and + * last_VFP_context updated. + */ + if (fpexc & FPEXC_EN) + goto out; + + if (!last_VFP_context[cpu]) + goto out; + + /* + * Save the last VFP state on this CPU. + */ + fmxr(FPEXC, fpexc | FPEXC_EN); + vfp_save_state(last_VFP_context[cpu], fpexc); + fmxr(FPEXC, fpexc); + + /* + * Set the context to NULL to force a reload the next time the thread + * uses the VFP. + */ + last_VFP_context[cpu] = NULL; + +out: + put_cpu(); +} +#endif + #include <linux/smp.h> /* @@ -427,6 +476,18 @@ static int __init vfp_init(void) * in place; report VFP support to userspace. */ elf_hwcap |= HWCAP_VFP; +#ifdef CONFIG_VFPv3 + if (VFP_arch >= 3) { + elf_hwcap |= HWCAP_VFPv3; + + /* + * Check for VFPv3 D16. CPUs in this configuration + * only have 16 x 64bit registers. + */ + if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1) + elf_hwcap |= HWCAP_VFPv3D16; + } +#endif #ifdef CONFIG_NEON /* * Check for the presence of the Advanced SIMD |