Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates (part 2) from Arnd Bergmann:
 "These are mostly new device tree bindings for existing drivers, as
  well as changes to the device tree source files to add support for
  those devices, and a couple of new boards, most notably Samsung's
  Exynos5 based Chromebook.

  The changes depend on earlier platform specific updates and touch the
  usual platforms: omap, exynos, tegra, mxs, mvebu and davinci."

* tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: add mshc controller node for Exynos4x12 SoCs
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM/dts: OMAP3: fix pinctrl-single configuration
  ARM: dts: Add OMAP3430 SDP NOR flash memory binding
  ARM: dts: Add NOR flash bindings for OMAP2420 H4
  ...

106 files changed, 7082 insertions, 2576 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2ab88e91e65..e6611eaa288 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -53,6 +53,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-origen.dtb \
 	exynos5250-arndale.dtb \
+	exynos5440-sd5v1.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5440-ssdk5440.dtb
@@ -134,10 +135,14 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
+	omap3-igep0020.dtb \
+	omap3-igep0030.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 11b240c5d32..5302f79c05b 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -43,7 +43,7 @@
 			status = "okay";
 		};
 
-		i2c1: i2c@44e0b000 {
+		i2c0: i2c@44e0b000 {
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -59,27 +59,27 @@
 
 		led@2 {
 			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio2 21 0>;
+			gpios = <&gpio1 21 0>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "beaglebone:green:mmc0";
-			gpios = <&gpio2 22 0>;
+			gpios = <&gpio1 22 0>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "beaglebone:green:usr2";
-			gpios = <&gpio2 23 0>;
+			gpios = <&gpio1 23 0>;
 			default-state = "off";
 		};
 
 		led@5 {
 			label = "beaglebone:green:usr3";
-			gpios = <&gpio2 24 0>;
+			gpios = <&gpio1 24 0>;
 			default-state = "off";
 		};
 	};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6496440fce..0423298a26f 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -51,7 +51,7 @@
 			status = "okay";
 		};
 
-		i2c1: i2c@44e0b000 {
+		i2c0: i2c@44e0b000 {
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -60,7 +60,7 @@
 			};
 		};
 
-		i2c2: i2c@4802a000 {
+		i2c1: i2c@4802a000 {
 			status = "okay";
 			clock-frequency = <100000>;
 
@@ -123,12 +123,12 @@
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
 
-		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */
-			     &gpio2 26 0	/* Bank1, pin26 */
-			     &gpio2 27 0>;	/* Bank1, pin27 */
+		row-gpios = <&gpio1 25 0	/* Bank1, pin25 */
+			     &gpio1 26 0	/* Bank1, pin26 */
+			     &gpio1 27 0>;	/* Bank1, pin27 */
 
-		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */
-			     &gpio2 22 0>;	/* Bank1, pin22 */
+		col-gpios = <&gpio1 21 0	/* Bank1, pin21 */
+			     &gpio1 22 0>;	/* Bank1, pin22 */
 
 		linux,keymap = <0x0000008b	/* MENU */
 				0x0100009e	/* BACK */
@@ -147,14 +147,14 @@
 		switch@9 {
 			label = "volume-up";
 			linux,code = <115>;
-			gpios = <&gpio1 2 1>;
+			gpios = <&gpio0 2 1>;
 			gpio-key,wakeup;
 		};
 
 		switch@10 {
 			label = "volume-down";
 			linux,code = <114>;
-			gpios = <&gpio1 3 1>;
+			gpios = <&gpio0 3 1>;
 			gpio-key,wakeup;
 		};
 	};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index f5a6162a4ff..f67c360844f 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -58,7 +58,7 @@
 			status = "okay";
 		};
 
-		i2c1: i2c@44e0b000 {
+		i2c0: i2c@44e0b000 {
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -115,26 +115,26 @@
 
 		led@1 {
 			label = "evmsk:green:usr0";
-			gpios = <&gpio2 4 0>;
+			gpios = <&gpio1 4 0>;
 			default-state = "off";
 		};
 
 		led@2 {
 			label = "evmsk:green:usr1";
-			gpios = <&gpio2 5 0>;
+			gpios = <&gpio1 5 0>;
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "evmsk:green:mmc0";
-			gpios = <&gpio2 6 0>;
+			gpios = <&gpio1 6 0>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "evmsk:green:heartbeat";
-			gpios = <&gpio2 7 0>;
+			gpios = <&gpio1 7 0>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
@@ -148,26 +148,26 @@
 		switch@1 {
 			label = "button0";
 			linux,code = <0x100>;
-			gpios = <&gpio3 3 0>;
+			gpios = <&gpio2 3 0>;
 		};
 
 		switch@2 {
 			label = "button1";
 			linux,code = <0x101>;
-			gpios = <&gpio3 2 0>;
+			gpios = <&gpio2 2 0>;
 		};
 
 		switch@3 {
 			label = "button2";
 			linux,code = <0x102>;
-			gpios = <&gpio1 30 0>;
+			gpios = <&gpio0 30 0>;
 			gpio-key,wakeup;
 		};
 
 		switch@4 {
 			label = "button3";
 			linux,code = <0x103>;
-			gpios = <&gpio3 5 0>;
+			gpios = <&gpio2 5 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 91fe4f148f8..d1101103aa5 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -21,6 +21,8 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
+		d_can0 =