ARM i.MX ehci: do ehci init in board specific functions

The mxc-ehci driver calls SoC specific phy initialization right after
calling board specific initialization. To offer greater flexibility for
boards to setup the phy and to get rid of some unnecessary flags in
platform data this patch lets the boards call the SoC specific phy
initialization and remove it from the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

26 files changed, 191 insertions, 112 deletions

diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index cabb800adbb..6b724c2ed0a 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -210,14 +210,24 @@ static struct platform_device serial_device = {
 #endif
 
 #if defined(CONFIG_USB_ULPI)
+static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= eukrea_cpuimx27_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= eukrea_cpuimx27_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 439167dbe8f..9da8d18eeb0 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -84,15 +84,25 @@ static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
 	},
 };
 
+static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
+{
+	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.init	= eukrea_cpuimx25_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
+{
+	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.init	= eukrea_cpuimx25_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 494723bf7ea..ffff2d03f78 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -210,14 +211,16 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static const struct mxc_usbh_platform_data
 visstrim_m10_usbotg_pdata __initconst = {
 	.init = otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static void __init visstrim_m10_board_init(void)
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index cd18a0c91b8..aafc6f7f181 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -185,9 +185,14 @@ static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
 	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
 };
 
+static int mx25pdk_usbh2_init(struct platform_device *pdev)
+{
+	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.init	= mx25pdk_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 4e0e225ca4a..ba88417345a 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -160,10 +160,14 @@ static int otg_phy_init(void)
 }
 
 #if defined(CONFIG_USB_ULPI)
+static int mx27_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx27_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 3514178caed..f754bab040b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -271,25 +271,29 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.init	= otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static int usbh2_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 9656ef38ca9..38c77084b61 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -281,9 +281,15 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
 	}
 };
 
+static int pcm038_usbh2_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.init	= pcm038_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static void __init pcm038_init(void)
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 835e2a082b4..34e619e811e 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -176,8 +176,10 @@ static int usbotg_init(struct platform_device *pdev)
 	gpio_set_value(OTG_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 otg_free_reset:
 	gpio_free(OTG_RESET);
@@ -233,8 +235,10 @@ static int usbh2_init(struct platform_device *pdev)
 	gpio_set_value(USBH2_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 h2_free_reset:
 	gpio_free(USBH2_RESET);
@@ -246,13 +250,11 @@ h2_free_cs:
 static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
 	.init	= usbotg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif /* CONFIG_USB_ULPI */
 
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 3eedf0fcaed..0f2305626e1 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -111,15 +111,25 @@ static const struct mxc_nand_platform_data
 	.flash_bbt	= 1,
 };
 
+static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.init	= eukrea_cpuimx35_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= eukrea_cpuimx35_usbh1_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 3d0ded92a8a..2d744b27f63 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -245,7 +245,13 @@ usbotg_free_reset:
 	return err;
 }
 
-static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev)
+#if defined(CONFIG_USB_ULPI)
+static int mx31_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static int mx31_3ds_host2_init(struct platform_device *pdev)
 {
 	int err;
 
@@ -276,23 +282,24 @@ static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev)
 
 	mdelay(1);
 	gpio_set_value(USBH2_RST_B, 1);
-	return 0;
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 
 usbotg_free_reset:
 	gpio_free(USBH2_RST_B);
 	return err;
 }
 
-#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx31_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init = mx31_3ds_host2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 #endif
 
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 1c3f4913d1e..be79a0d6301 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
@@ -156,7 +157,9 @@ static int usbotg_init(struct platform_device *pdev)
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
 	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static int usbh1_init(struct platform_device *pdev)
@@ -183,7 +186,10 @@ static int usbh1_init(struct platform_device *pdev)
 
 	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 static int usbh2_init(struct platform_device *pdev)
@@ -220,25 +226,24 @@ static int usbh2_init(struct platform_device *pdev)
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
 	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static struct mxc_usbh_platform_data usbotg_pdata = {
 	.init	= usbotg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.init	= usbh1_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static void lilly1131_usb_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 01e24b5045e..e146f1a72da 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -27,6 +27,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/mtd/physmap.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -167,13 +168,14 @@ static int usbh2_init(struct platform_device *pdev)
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
 	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init   = usbh2_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
 #endif
 
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index fd988a0d9a5..ea880330e83 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -401,10 +401,14 @@ static void usb_xcvr_reset(void)
 }
 
 #if defined(CONFIG_USB_ULPI)
+static int moboard_usbh2_init_hw(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= moboard_usbh2_init_hw,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init moboard_usbh2_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index c5115dc5c0c..dac1896a5b2 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -120,6 +120,11 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
+static int mx35_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
 /* OTG config */
 static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
@@ -127,15 +132,20 @@ static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
 };
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx35_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
+static int mx35_3ds_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+	.init		= mx35_3ds_usbh_init,
 	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
 };
 
 static int otg_mode_host;
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 7d444f714f3..55f95d42f71 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -534,14 +534,24 @@ static struct platform_device pcm970_sja1000 = {
 };
 
 #if defined(CONFIG_USB_ULPI)
+static int pcm037_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm037_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int pcm037_usbh2_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= pcm037_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index b03e19d6548..4fa07142a9b 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -306,16 +306,26 @@ pcm037_nand_board_info __initconst = {
 };
 
 #if defined(CONFIG_USB_ULPI)
+static int pcm043_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm043_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
+static int pcm043_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= pcm043_usbh1_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 94a0b9e4b7f..6410b9c48a0 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -15,6 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -149,7 +150,10 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev)
 	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
@@ -187,7 +191,6 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= devboard_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static int __init devboard_usbh1_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index f449a97ae1a..57f7b00cb70 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -265,7 +265,10 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev)
 	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
@@ -303,7 +306,6 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= marxbot_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static int __init marxbot_usbh1_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index bbec3c82264..87d556f40ec 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -123,9 +123,14 @@ static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 
 #if defined(CONFIG_USB_ULPI)
 
+static int smartbot_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
 static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
+	.init	= smartbot_otg_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init smartbot_otg_host_init(void)
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 2d4199d3790..d0296a94c47 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -184,7 +184,10 @@ static int initialize_otg_port(struct platform_device *pdev)
 	v |= MX51_USB_PLL_DIV_19_2_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -202,13 +205,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
 	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -219,7 +225,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 6c3b445e395..f38b341ac40 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -167,7 +167,10 @@ static int initialize_otg_port(struct platform_device *pdev)
 	v |= MX51_USB_PLL_DIV_19_2_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -186,13 +189,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
 			usbother_base + MX51_USB_CTRL_1_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -203,7 +209,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 2bd9c9e4e6b..7874bcd41db 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -259,7 +259,10 @@ static int initialize_otg_port(struct platform_device *pdev)
 	v |= MX51_USB_PLL_DIV_19_2_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -277,13 +280,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
 	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -294,7 +300,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 2aac4c5b7b5..b0fa55327c3 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -145,13 +145,15 @@ static int initialize_otg_port(struct platform_device *pdev)
 	v |= MX51_USB_PLL_DIV_24_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init   = initialize_otg_port,
 	.portsc = MXC_EHCI_UTMI_16BIT,
-	.flags  = MXC_EHCI_INTERNAL_PHY,
 };
 
 /*   PCBID2  PCBID1 PCBID0  STATE
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 5fd20e96876..a1387875a49 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
-obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
deleted file mode 100644
index 06fb3a4d7c2..00000000000
--- a/arch/arm/plat-mxc/ehci.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-int mxc_initialize_usb_hw(int port, unsigned int flags)
-{
-#if defined(CONFIG_SOC_IMX25)
-	if (cpu_is_mx25())
-		return mx25_initialize_usb_hw(port, flags);
-#endif /* if defined(CONFIG_SOC_IMX25) */
-#if defined(CONFIG_ARCH_MX3)
-	if (cpu_is_mx31())
-		return mx31_initialize_usb_hw(port, flags);
-	if (cpu_is_mx35())
-		return mx35_initialize_usb_hw(port, flags);
-#endif /* CONFIG_ARCH_MX3 */
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
-		return mx27_initialize_usb_hw(port, flags);
-#endif /* CONFIG_MACH_MX27 */
-#ifdef CONFIG_SOC_IMX51
-	if (cpu_is_mx51())
-		return mx51_initialize_usb_hw(port, flags);
-#endif
-	printk(KERN_WARNING
-		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
-	return -EINVAL;
-}
-EXPORT_SYMBOL(mxc_initialize_usb_hw);
-
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 7e555a1f4a4..2c159dc2398 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -44,12 +44,9 @@ struct mxc_usbh_platform_data {
 	int (*exit)(struct platform_device *pdev);
 
 	unsigned int		 portsc;
-	unsigned int		 flags;
 	struct otg_transceiver	*otg;
 };
 
-int mxc_initialize_usb_hw(int port, unsigned int flags);
-
 int mx51_initialize_usb_hw(int port, unsigned int flags);
 int mx25_initialize_usb_hw(int port, unsigned int flags);
 int mx31_initialize_usb_hw(int port, unsigned int flags);