Merge ../linux-2.6

37 files changed, 3834 insertions, 163 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bf2e72698d0..ba46d779ede 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
 config ARM
 	bool
 	default y
+	select RTC_LIB
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -152,6 +153,12 @@ config ARCH_IXP2000
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
+config ARCH_IXP23XX
+ 	bool "IXP23XX-based"
+ 	select PCI
+	help
+	  Support for Intel's IXP23xx (XScale) family of processors.
+
 config ARCH_L7200
 	bool "LinkUp-L7200"
 	select FIQ
@@ -273,6 +280,8 @@ source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-ixp2000/Kconfig"
 
+source "arch/arm/mach-ixp23xx/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
@@ -791,7 +800,8 @@ source "drivers/acorn/block/Kconfig"
 
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
-	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+	|| ARCH_IXP23XX
 source "drivers/ide/Kconfig"
 endif
 
@@ -839,6 +849,8 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/rtc/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 99c0d323719..ce3e804ea0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -57,6 +57,7 @@ tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
@@ -97,6 +98,7 @@ endif
  machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
+ machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
   incdir-$(CONFIG_ARCH_OMAP)	   := omap
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 35ffe0f4ece..2adc1527e0e 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -50,10 +50,6 @@ ifeq ($(CONFIG_ARCH_AT91RM9200),y)
 OBJS		+= head-at91rm9200.o
 endif
 
-ifeq ($(CONFIG_DEBUG_ICEDCC),y)
-OBJS            += ice-dcc.o
-endif
-
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 OBJS		+= big-endian.o
 endif
diff --git a/arch/arm/boot/compressed/ice-dcc.S b/arch/arm/boot/compressed/ice-dcc.S
deleted file mode 100644
index 104377a199b..00000000000
--- a/arch/arm/boot/compressed/ice-dcc.S
+++ /dev/null
@@ -1,17 +0,0 @@
-
-
-	.text
-
-	.global	icedcc_putc
-
-icedcc_putc:
-	mov	r2, #0x4000000
-1:
-	subs	r2, r2, #1
-	movlt	pc, r14
-	mrc	p14, 0, r1, c0, c0, 0
-	tst	r1, #2
-	bne	1b
-
-	mcr	p14, 0, r0, c1, c0, 0
-	mov	pc, r14
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 5ab94584bae..0af3772efcb 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -20,24 +20,45 @@ unsigned int __machine_arch_type;
 
 #include <linux/string.h>
 
-#include <asm/arch/uncompress.h>
-
 #ifdef STANDALONE_DEBUG
 #define putstr printf
-#endif
+#else
+
+static void putstr(const char *ptr);
+
+#include <linux/compiler.h>
+#include <asm/arch/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
-#define putstr icedcc_putstr
-#define putc icedcc_putc
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
 
-extern void icedcc_putc(int ch);
+	do {
+		if (--i < 0)
+			return;
 
-static void
-icedcc_putstr(const char *ptr)
+		asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
+	} while (status & 2);
+
+	asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch));
+}
+
+#define putc(ch)	icedcc_putc(ch)
+#define flush()	do { } while (0)
+#endif
+
+static void putstr(const char *ptr)
 {
-	for (; *ptr != '\0'; ptr++) {
-		icedcc_putc(*ptr);
+	char c;
+
+	while ((c = *ptr++) != '\0') {
+		if (c == '\n')
+			putc('\r');
+		putc(c);
 	}
+
+	flush();
 }
 
 #endif
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
index e851d86c212..35c9a64ac14 100644
--- a/arch/arm/common/rtctime.c
+++ b/arch/arm/common/rtctime.c
@@ -20,6 +20,7 @@
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/rtc.h>
 
 #include <asm/rtc.h>
 #include <asm/semaphore.h>
@@ -42,89 +43,6 @@ static struct rtc_ops *rtc_ops;
 
 #define rtc_epoch 1900UL
 
-static const unsigned char days_in_month[] = {
-	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
-#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
-
-static int month_days(unsigned int month, unsigned int year)
-{
-	return days_in_month[month] + (LEAP_YEAR(year) && month == 1);
-}
-
-/*
- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
- */
-void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
-{
-	int days, month, year;
-
-	days = time / 86400;
-	time -= days * 86400;
-
-	tm->tm_wday = (days + 4) % 7;
-
-	year = 1970 + days / 365;
-	days -= (year - 1970) * 365
-	        + LEAPS_THRU_END_OF(year - 1)
-	        - LEAPS_THRU_END_OF(1970 - 1);
-	if (days < 0) {
-		year -= 1;
-		days += 365 + LEAP_YEAR(year);
-	}
-	tm->tm_year = year - 1900;
-	tm->tm_yday = days + 1;
-
-	for (month = 0; month < 11; month++) {
-		int newdays;
-
-		newdays = days - month_days(month, year);
-		if (newdays < 0)
-			break;
-		days = newdays;
-	}
-	tm->tm_mon = month;
-	tm->tm_mday = days + 1;
-
-	tm->tm_hour = time / 3600;
-	time -= tm->tm_hour * 3600;
-	tm->tm_min = time / 60;
-	tm->tm_sec = time - tm->tm_min * 60;
-}
-EXPORT_SYMBOL(rtc_time_to_tm);
-
-/*
- * Does the rtc_time represent a valid date/time?
- */
-int rtc_valid_tm(struct rtc_time *tm)
-{
-	if (tm->tm_year < 70 ||
-	    tm->tm_mon >= 12 ||
-	    tm->tm_mday < 1 ||
-	    tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) ||
-	    tm->tm_hour >= 24 ||
-	    tm->tm_min >= 60 ||
-	    tm->tm_sec >= 60)
-		return -EINVAL;
-
-	return 0;
-}
-EXPORT_SYMBOL(rtc_valid_tm);
-
-/*
- * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
- */
-int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
-{
-	*time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-		       tm->tm_hour, tm->tm_min, tm->tm_sec);
-
-	return 0;
-}
-EXPORT_SYMBOL(rtc_tm_to_time);
-
 /*
  * Calculate the next alarm time given the requested alarm time mask
  * and the current time.
@@ -151,13 +69,13 @@ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc
 	}
 }
 
-static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
+static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
 {
 	memset(tm, 0, sizeof(struct rtc_time));
 	return ops->read_time(tm);
 }
 
-static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
+static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
 {
 	int ret;
 
@@ -168,7 +86,7 @@ static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
 	return ret;
 }
 
-static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
+static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
 {
 	int ret = -EINVAL;
 	if (ops->read_alarm) {
@@ -178,7 +96,7 @@ static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
 	return ret;
 }
 
-static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
+static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
 {
 	int ret = -EINVAL;
 	if (ops->set_alarm)
@@ -266,7 +184,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 	switch (cmd) {
 	case RTC_ALM_READ:
-		ret = rtc_read_alarm(ops, &alrm);
+		ret = rtc_arm_read_alarm(ops, &alrm);
 		if (ret)
 			break;
 		ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
@@ -288,11 +206,11 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		alrm.time.tm_wday = -1;
 		alrm.time.tm_yday = -1;
 		alrm.time.tm_isdst = -1;
-		ret = rtc_set_alarm(ops, &alrm);
+		ret = rtc_arm_set_alarm(ops, &alrm);
 		break;
 
 	case RTC_RD_TIME:
-		ret = rtc_read_time(ops, &tm);
+		ret = rtc_arm_read_time(ops, &tm);
 		if (ret)
 			break;
 		ret = copy_to_user(uarg, &tm, sizeof(tm));
@@ -310,7 +228,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			ret = -EFAULT;
 			break;
 		}
-		ret = rtc_set_time(ops, &tm);
+		ret = rtc_arm_set_time(ops, &tm);
 		break;
 
 	case RTC_EPOCH_SET:
@@ -341,11 +259,11 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			ret = -EFAULT;
 			break;
 		}
-		ret = rtc_set_alarm(ops, &alrm);
+		ret = rtc_arm_set_alarm(ops, &alrm);
 		break;
 
 	case RTC_WKALM_RD:
-		ret = rtc_read_alarm(ops, &alrm);
+		ret = rtc_arm_read_alarm(ops, &alrm);
 		if (ret)
 			break;
 		ret = copy_to_user(uarg, &alrm, sizeof(alrm));
@@ -435,7 +353,7 @@ static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eo
 	struct rtc_time tm;
 	char *p = page;
 
-	if (rtc_read_time(ops, &tm) == 0) {
+	if (rtc_arm_read_time(ops, &tm) == 0) {
 		p += sprintf(p,
 			"rtc_time\t: %02d:%02d:%02d\n"
 			"rtc_date\t: %04d-%02d-%02d\n"
@@ -445,7 +363,7 @@ static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eo
 			rtc_epoch);
 	}
 
-	if (rtc_read_alarm(ops, &alrm) == 0) {
+	if (rtc_arm_read_alarm(ops, &alrm) == 0) {
 		p += sprintf(p, "alrm_time\t: ");
 		if ((unsigned int)alrm.time.tm_hour <= 24)
 			p += sprintf(p, "%02d:", alrm.time.tm_hour);
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
new file mode 100644
index 00000000000..1a2751e9ab0
--- /dev/null
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -0,0 +1,1302 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16
+# Tue Mar 21 03:27:20 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+CONFIG_ARCH_IXP23XX=y
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP23xx Implementation Options
+#
+
+#
+# IXP23xx Platforms
+#
+CONFIG_MACH_ESPRESSO=y
+CONFIG_MACH_IXDP2351=y
+CONFIG_MACH_ROADRUNNER=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+CONFIG_CPU_BIG_ENDIAN=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_SYNCLINK_SYNCPPP is not set
+CONFIG_HDLC=y
+CONFIG_HDLC_RAW=y
+# CONFIG_HDLC_RAW_ETH is not set
+CONFIG_HDLC_CISCO=y
+CONFIG_HDLC_FR=y
+CONFIG_HDLC_PPP=y
+
+#
+# X.25/LAPB support is disabled
+#
+# CONFIG_PCI200SYN is not set
+# CONFIG_WANXL is not set
+# CONFIG_PC300 is not set
+# CONFIG_FARSYNC is not set
+CONFIG_DLCI=y
+CONFIG_DLCI_COUNT=24
+CONFIG_DLCI_MAX=8
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 391f3ab3ff3..7b726b627ea 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -18,7 +18,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 
 # the code in uaccess.S is not preemption safe and
 # probably faster on ARMv3 only
-ifeq ($CONFIG_PREEMPT,y)
+ifeq ($(CONFIG_PREEMPT),y)
   lib-y	+= copy_from_user.o copy_to_user.o
 else
 ifneq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 838e435e492..cab355c0c1f 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -236,7 +236,7 @@
 
 
 /*
- * Abort preanble and completion macros.
+ * Abort preamble and completion macros.
  * If a fixup handler is required then those macros must surround it.
  * It is assumed that the fixup code will handle the private part of
  * the exit macro.
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 865427bfad7..2d892e4daa0 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -30,7 +30,9 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/delay.h>
+#include <linux/termios.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -360,6 +362,68 @@ void __init ep93xx_init_irq(void)
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
+#define EP93XX_UART_MCR_OFFSET		(0x0100)
+
+static void ep93xx_uart_set_mctrl(struct amba_device *dev,
+				  void __iomem *base, unsigned int mctrl)
+{
+	unsigned int mcr;
+
+	mcr = 0;
+	if (!(mctrl & TIOCM_RTS))
+		mcr |= 2;
+	if (!(mctrl & TIOCM_DTR))
+		mcr |= 1;
+
+	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
+}
+
+static struct amba_pl010_data ep93xx_uart_data = {
+	.set_mctrl	= ep93xx_uart_set_mctrl,
+};
+
+static struct amba_device uart1_device = {
+	.dev		= {
+		.bus_id		= "apb:uart1",
+		.platform_data	= &ep93xx_uart_data,
+	},
+	.res		= {
+		.start	= EP93XX_UART1_PHYS_BASE,
+		.end	= EP93XX_UART1_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { IRQ_EP93XX_UART1, NO_IRQ },
+	.periphid	= 0x00041010,
+};
+
+static struct amba_device uart2_device = {
+	.dev		= {
+		.bus_id		= "apb:uart2",
+		.platform_data	= &ep93xx_uart_data,
+	},
+	.res		= {
+		.start	= EP93XX_UART2_PHYS_BASE,
+		.end	= EP93XX_UART2_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { IRQ_EP93XX_UART2, NO_IRQ },
+	.periphid	= 0x00041010,
+};
+
+static struct amba_device uart3_device = {
+	.dev		= {
+		.bus_id		= "apb:uart3",
+		.platform_data	= &ep93xx_uart_data,
+	},
+	.res		= {
+		.start	= EP93XX_UART3_PHYS_BASE,
+		.end	= EP93XX_UART3_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { IRQ_EP93XX_UART3, NO_IRQ },
+	.periphid	= 0x00041010,
+};
+
 void __init ep93xx_init_devices(void)
 {
 	unsigned int v;
@@ -371,4 +435,8 @@ void __init ep93xx_init_devices(void)
 	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+
+	amba_device_register(&uart1_device, &iomem_resource);
+	amba_device_register(&uart2_device, &iomem_resource);
+	amba_device_register(&uart3_device, &iomem_resource);
 }
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index 2c64a0b0502..5d02e95dede 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -34,27 +34,12 @@ static int rtc_base;
 static unsigned long __init get_isa_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
-	int i;
 
 	// check to see if the RTC makes sense.....
 	if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0)
 		return mktime(1970, 1, 1, 0, 0, 0);
 
-	/* The Linux interpretation of the CMOS clock register contents:
-	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-	 * RTC registers show the second which has precisely just started.
-	 * Let's hope other operating systems interpret the RTC the same way.
-	 */
-	/* read RTC exactly on falling edge of update flag */
-	for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
-		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
-			break;
-
-	for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
-		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
-			break;
-
-	do { /* Isn't this overkill ? UIP above should guarantee consistency */
+	do {
 		sec  = CMOS_READ(RTC_SECONDS);
 		min  = CMOS_READ(RTC_MINUTES);
 		hour = CMOS_READ(RTC_HOURS);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 20071a2767c..576a5e979c0 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -15,7 +15,9 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/termios.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -28,6 +30,8 @@
 
 #include "common.h"
 
+static struct amba_pl010_data integrator_uart_data;
+
 static struct amba_device rtc_device = {
 	.dev		= {
 		.bus_id	= "mb:15",
@@ -44,6 +48,7 @@ static struct amba_device rtc_device = {
 static struct amba_device uart0_device = {
 	.dev		= {
 		.bus_id	= "mb:16",
+		.platform_data = &integrator_uart_data,
 	},
 	.res		= {
 		.start	= INTEGRATOR_UART0_BASE,
@@ -57,6 +62,7 @@ static struct amba_device uart0_device = {
 static struct amba_device uart1_device = {
 	.dev		= {
 		.bus_id	= "mb:17",
+		.platform_data = &integrator_uart_data,
 	},
 	.res		= {
 		.start	= INTEGRATOR_UART1_BASE,
@@ -115,6 +121,46 @@ static int __init integrator_init(void)
 
 arch_initcall(integrator_init);
 
+/*
+ * On the Integrator platform, the port RTS and DTR are provided by
+ * bits in the following SC_CTRLS register bits:
+ *        RTS  DTR
+ *  UART0  7    6
+ *  UART1  5    4
+ */
+#define SC_CTRLC	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
+#define SC_CTRLS	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+
+static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
+{
+	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+
+	if (dev == &uart0_device) {
+		rts_mask = 1 << 4;
+		dtr_mask = 1 << 5;
+	} else {
+		rts_mask = 1 << 6;
+		dtr_mask = 1 << 7;
+	}
+
+	if (mctrl & TIOCM_RTS)
+		ctrlc |= rts_mask;
+	else
+		ctrls |= rts_mask;
+
+	if (mctrl & TIOCM_DTR)
+		ctrlc |= dtr_mask;
+	else
+		ctrls |= dtr_mask;
+
+	__raw_writel(ctrls, SC_CTRLS);
+	__raw_writel(ctrlc, SC_CTRLC);
+}
+
+static struct amba_pl010_data integrator_uart_data = {
+	.set_mctrl = integrator_uart_set_mctrl,
+};
+
 #define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
 
 static DEFINE_SPINLOCK(cm_lock);
diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c
index 3c22c16b38b..bc07f52a6fd 100644
--- a/arch/arm/mach-integrator/time.c
+++ b/arch/arm/mach-integrator/time.c
@@ -40,13 +40,13 @@ static int integrator_set_rtc(void)
 	return 1;
 }
 
-static int rtc_read_alarm(struct rtc_wkalrm *alrm)
+static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm)
 {
 	rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time);
 	return 0;
 }
 
-static inline int rtc_set_alarm(struct rtc_wkalrm *alrm)
+static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm)
 {
 	unsigned long time;
 	int ret;
@@ -62,7 +62,7 @@ static inline int rtc_set_alarm(struct rtc_wkalrm *alrm)
 	return ret;
 }
 
-static int rtc_read_time(struct rtc_time *tm)
+static int integrator_rtc_read_time(struct rtc_time *tm)
 {
 	rtc_time_to_tm(readl(rtc_base + RTC_DR), tm);
 	return 0;
@@ -76,7 +76,7 @@ static int rtc_read_time(struct rtc_time *tm)
  * edge of the 1Hz clock, we must write the time one second
  * in advance.
  */
-static inline int rtc_set_time(struct rtc_time *tm)
+static inline int integrator_rtc_set_time(struct rtc_time *tm)
 {
 	unsigned long time;
 	int ret;
@@ -90,10 +90,10 @@ static inline int rtc_set_time(struct rtc_time *tm)
 
 static struct rtc_ops rtc_ops = {
 	.owner		= THIS_MODULE,
-	.read_time	= rtc_read_time,
-	.set_time	= rtc_set_time,
-	.read_alarm	= rtc_read_alarm,
-	.set_alarm	= rtc_set_alarm,
+	.read_time	= integrator_rtc_read_time,
+	.set_time	= integrator_rtc_set_time,
+	.read_alarm	= integrator_rtc_read_alarm,
+	.set_alarm	= integrator_rtc_set_alarm,
 };
 
 static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id,
diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig
new file mode 100644
index 00000000000..982670ec386
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/Kconfig
@@ -0,0 +1,25 @@
+if ARCH_IXP23XX
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+	bool
+	default y
+
+menu "Intel IXP23xx Implementation Options"
+
+comment "IXP23xx Platforms"
+
+config MACH_ESPRESSO
+	bool "Support IP Fabrics Double Espresso platform"
+	help
+
+config MACH_IXDP2351
+	bool "Support Intel IXDP2351 platform"
+	help
+
+config MACH_ROADRUNNER
+	bool "Support ADI RoadRunner platform"
+	help
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile
new file mode 100644
index 00000000000..288b371b6d0
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+obj-y			:= core.o pci.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_MACH_ESPRESSO)	+= espresso.o
+obj-$(CONFIG_MACH_IXDP2351)	+= ixdp2351.o
+obj-$(CONFIG_MACH_ROADRUNNER)	+= roadrunner.o
diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot
new file mode 100644
index 00000000000..d5561ad15ba
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
new file mode 100644
index 00000000000..092ee12ced4
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-ixp23xx/core.c
+ *
+ * Core routines for IXP23xx chips
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+
+
+/*************************************************************************
+ * Chip specific mappings shared by all IXP23xx systems
+ *************************************************************************/
+static struct map_desc ixp23xx_io_desc[] __initdata = {
+	{ /* XSI-CPP CSRs */
+	 	.virtual	= IXP23XX_XSI2CPP_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
+	 	.length		= IXP23XX_XSI2CPP_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* Expansion Bus Config */
+	 	.virtual	= IXP23XX_EXP_CFG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
+	 	.length		= IXP23XX_EXP_CFG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
+	 	.virtual	= IXP23XX_PERIPHERAL_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
+	 	.length		= IXP23XX_PERIPHERAL_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* CAP CSRs */
+	 	.virtual	= IXP23XX_CAP_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
+	 	.length		= IXP23XX_CAP_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* MSF CSRs */
+	 	.virtual	= IXP23XX_MSF_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
+	 	.length		= IXP23XX_MSF_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI I/O Space */
+	 	.virtual	= IXP23XX_PCI_IO_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
+	 	.length		= IXP23XX_PCI_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI Config Space */
+	 	.virtual	= IXP23XX_PCI_CFG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
+	 	.length		= IXP23XX_PCI_CFG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI local CFG CSRs */
+	 	.virtual	= IXP23XX_PCI_CREG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
+	 	.length		= IXP23XX_PCI_CREG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI MEM Space */
+	 	.virtual	= IXP23XX_PCI_MEM_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
+	 	.length		= IXP23XX_PCI_MEM_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+void __init ixp23xx_map_io(void)
+{
+	iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
+}
+
+
+/***************************************************************************
+ * IXP23xx Interrupt Handling
+ ***************************************************************************/
+enum ixp23xx_irq_type {
+	IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
+};
+
+static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
+
+static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+	u32 int_style;
+	enum ixp23xx_irq_type irq_type;
+	volatile u32 *int_reg;
+
+	/*
+	 * Only GPIOs 6-15 are wired to interrupts on IXP23xx
+	 */
+	if (line < 6 || line > 15)
+		return -EINVAL;
+
+	switch (type) {
+	case IRQT_BOTHEDGE:
+		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQT_RISING:
+		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQT_FALLING:
+		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQT_HIGH:
+		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
+		irq_type = IXP23XX_IRQ_LEVEL;
+		break;
+	case IRQT_LOW:
+		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
+		irq_type = IXP23XX_IRQ_LEVEL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ixp23xx_config_irq(irq, irq_type);
+
+	if (line >= 8) {	/* pins 8-15 */
+		line -= 8;
+		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
+	} else {		/* pins 0-7 */
+		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
+	}
+
+	/*
+	 * Clear pending interrupts
+	 */
+	*IXP23XX_GPIO_GPISR = (1 << line);
+
+	/* Clear the style for the appropriate pin */
+	*int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
+			(line * IXP23XX_GPIO_STYLE_SIZE));
+
+	/* Set the new style */
+	*int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
+
+	return 0;
+}
+
+static void ixp23xx_irq_mask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+	*intr_reg &= ~(1 << (irq % 32));
+}
+
+static void ixp23xx_irq_ack(unsigned int irq)
+{
+	int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+
+	if ((line < 6) || (line > 15))
+		return;
+
+	*IXP23XX_GPIO_GPISR = (1 << line);
+}
+
+/*
+ * Level triggered interrupts on GPIO lines can only be cleared when the
+ * interrupt condition disappears.
+ */
+static void ixp23xx_irq_level_unmask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+	ixp23xx_irq_ack(irq);
+
+	*intr_reg |= (1 << (irq % 32));
+}
+
+static void ixp23xx_irq_edge_unmask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+	*intr_reg |= (1 << (irq % 32));
+}
+
+static struct irqchip ixp23xx_irq_level_chip = {
+	.ack		= ixp23xx_irq_mask,
+	.mask		= ixp23xx_irq_mask,
+	.unmask		= ixp23xx_irq_level_unmask,
+	.set_type	= ixp23xx_irq_set_type
+};
+
+static struct irqchip ixp23xx_irq_edge_chip = {
+	.ack		= ixp23xx_irq_ack,
+	.mask		= ixp23xx_irq_mask,
+	.unmask		= ixp23xx_irq_edge_unmask,
+	.set_type	= ixp23xx_irq_set_type
+};
+
+static void ixp23xx_pci_irq_mask(unsigned int irq)
+{
+	*IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+static void ixp23xx_pci_irq_unmask(unsigned int irq)
+{
+	*IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+/*
+ * TODO: Should this just be done at ASM level?
+ */
+static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	u32 pci_interrupt;
+	unsigned int irqno;
+	struct irqdesc *int_desc;
+
+	pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
+
+	desc->chip->ack(irq);
+
+	/* See which PCI_INTA, or PCI_INTB interrupted */
+	if (pci_interrupt & (1 << 26)) {
+		irqno = IRQ_IXP23XX_INTB;
+	} else if (pci_interrupt & (1 << 27)) {
+		irqno = IRQ_IXP23XX_INTA;
+	} else {
+		BUG();
+	}
+
+	int_desc = irq_desc + irqno;
+	int_desc->handle(irqno, int_desc, regs);
+
+	desc->chip->unmask(irq);
+}
+
+static struct irqchip ixp23xx_pci_irq_chip = {
+	.ack	= ixp23xx_pci_irq_mask,
+	.mask	= ixp23xx_pci_irq_mask,
+	.unmask	= ixp23xx_pci_irq_unmask
+};
+
+static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
+{
+	switch (type) {
+	case IXP23XX_IRQ_LEVEL:
+		set_irq_chip(irq, &ixp23xx_irq_level_chip);
+		set_irq_handler(irq, do_level_IRQ);
+		break;
+	case IXP23XX_IRQ_EDGE:
+		set_irq_chip(irq, &ixp23xx_irq_edge_chip);
+		set_irq_handler(irq, do_edge_IRQ);
+		break;
+	}
+	set_irq_flags(irq, IRQF_VALID);
+}
+
+void __init ixp23xx_init_irq(void)
+{
+	int irq;
+
+	/* Route everything to IRQ */
+	*IXP23XX_INTR_SEL1 = 0x0;
+	*IXP23XX_INTR_SEL2 = 0x0;
+	*IXP23XX_INTR_SEL3 = 0x0;
+	*IXP23XX_INTR_SEL4 = 0x0;
+
+	/* Mask all sources */
+	*IXP23XX_INTR_EN1 = 0x0;
+	*IXP23XX_INTR_EN2 = 0x0;
+	*IXP23XX_INTR_EN3 = 0x0;
+	*IXP23XX_INTR_EN4 = 0x0;
+
+	/*
+	 * Configure all IRQs for level-sensitive operation
+	 */
+	for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
+		ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
+	}
+
+	for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
+		set_irq_chip(irq, &ixp23xx_pci_irq_chip);
+		set_irq_handler(irq, do_level_IRQ);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
+}
+
+
+/*************************************************************************
+ * Timer-tick functions for IXP23xx
+ *************************************************************************/
+#define CLOCK_TICKS_PER_USEC	CLOCK_TICK_RATE / (USEC_PER_SEC)
+
+static unsigned long next_jiffy_time;
+
+static unsigned long
+ixp23xx_gettimeoffset(void)
+{
+	unsigned long elapsed;
+
+	elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
+
+	return elapsed / CLOCK_TICKS_PER_USEC;
+}
+
+static irqreturn_t
+ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* Clear Pending Interrupt by writing '1' to it */
+	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+	while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) {
+		timer_tick(regs);
+		next_jiffy_time += LATCH;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ixp23xx_timer_irq = {
+	.name		= "IXP23xx Timer Tick",
+	.handler	= ixp23xx_timer_interrupt,
+	.flags		= SA_INTERRUPT | SA_TIMER,
+};
+
+void __init ixp23xx_init_timer(void)
+{
+	/* Clear Pending Interrupt by writing '1' to it */
+	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+
+	/* Setup the Timer counter value */
+	*IXP23XX_TIMER1_RELOAD =
+		(LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
+
+	*IXP23XX_TIMER_CONT = 0;
+	next_jiffy_time = LATCH;
+
+	/* Connect the interrupt handler and enable the interrupt */
+	setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
+}
+
+struct sys_timer ixp23xx_timer = {
+	.init		= ixp23xx_init_timer,
+	.offset		= ixp23xx_gettimeoffset,
+};
+
+
+/*************************************************************************
+ * IXP23xx Platform Initializaion
+ *************************************************************************/
+static struct resource ixp23xx_uart_resources[] = {
+	{
+		.start		= IXP23XX_UART1_PHYS,
+		.end		= IXP23XX_UART1_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}, {
+		.start		= IXP23XX_UART2_PHYS,
+		.end		= IXP23XX_UART2_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port ixp23xx_uart_data[] = {
+	{
+		.mapbase	= IXP23XX_UART1_PHYS,
+		.membase	= (char *)(IXP23XX_UART1_VIRT + 3),
+		.irq		= IRQ_IXP23XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP23XX_UART_XTAL,
+	}, {
+		.mapbase	= IXP23XX_UART2_PHYS,
+		.membase	= (char *)(IXP23XX_UART2_VIRT + 3),
+		.irq		= IRQ_IXP23XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP23XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device ixp23xx_uart = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev.platform_data	= ixp23xx_uart_data,
+	.num_resources		= 2,
+	.resource		= ixp23xx_uart_resources,
+};
+
+static struct platform_device *ixp23xx_devices[] __initdata = {
+	&ixp23xx_uart,
+};
+
+void __init ixp23xx_sys_init(void)
+{
+	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
+}
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
new file mode 100644
index 00000000000..2327c979041
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-ixp23xx/espresso.c
+ *
+ * Double Espresso-specific routines
+ *
+ * Author: Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+static void __init espresso_init(void)
+{
+	physmap_configure(0x90000000, 0x02000000, 2, NULL);
+
+	/*
+	 * Mark flash as writeable.
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
+	/* Maintainer: Lennert Buytenhek */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixp23xx_map_io,
+	.init_irq	= ixp23xx_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= espresso_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
new file mode 100644
index 00000000000..00146c35daa
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -0,0 +1,325 @@
+/*
+ * arch/arm/mach-ixp23xx/ixdp2351.c
+ *
+ * IXDP2351 board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * IXDP2351 Interrupt Handling
+ */
+static void ixdp2351_inta_mask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_unmask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	u16 ex_interrupt =
+		*IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
+	int i;
+
+	desc->chip->mask(irq);
+
+	for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
+		if (ex_interrupt & (1 << i)) {
+			struct irqdesc *cpld_desc;
+			int cpld_irq =
+				IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
+			cpld_desc = irq_desc + cpld_irq;
+			cpld_desc->handle(cpld_irq, cpld_desc, regs);
+		}
+	}
+
+	desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_inta_chip = {
+	.ack	= ixdp2351_inta_mask,
+	.mask	= ixdp2351_inta_mask,
+	.unmask	= ixdp2351_inta_unmask
+};
+
+static void ixdp2351_intb_mask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_unmask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	u16 ex_interrupt =
+		*IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
+	int i;
+
+	desc->chip->ack(irq);
+
+	for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
+		if (ex_interrupt & (1 << i)) {
+			struct irqdesc *cpld_desc;
+			int cpld_irq =
+				IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
+			cpld_desc = irq_desc + cpld_irq;
+			cpld_desc->handle(cpld_irq, cpld_desc, regs);
+		}
+	}
+
+	desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_intb_chip = {
+	.ack	= ixdp2351_intb_mask,
+	.mask	= ixdp2351_intb_mask,
+	.unmask	= ixdp2351_intb_unmask
+};
+
+void ixdp2351_init_irq(void)
+{
+	int irq;
+
+	/* Mask all interrupts from CPLD, disable simulation */
+	*IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
+	*IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
+	*IXDP2351_CPLD_INTA_SIM_REG = 0;
+	*IXDP2351_CPLD_INTB_SIM_REG = 0;
+
+	ixp23xx_init_irq();
+
+	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
+	     irq <
+	     IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
+	     irq++) {
+		if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
+			set_irq_flags(irq, IRQF_VALID);
+			set_irq_handler(irq, do_level_IRQ);
+			set_irq_chip(irq, &ixdp2351_inta_chip);
+		}
+	}
+
+	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
+	     irq <
+	     IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
+	     irq++) {
+		if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
+			set_irq_flags(irq, IRQF_VALID);
+			set_irq_handler(irq, do_level_IRQ);
+			set_irq_chip(irq, &ixdp2351_intb_chip);
+		}
+	}
+
+	set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler);
+	set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler);
+}
+
+/*
+ * IXDP2351 PCI
+ */
+
+/*
+ * This board does not do normal PCI IRQ routing, or any
+ * sort of swizzling, so we just need to check where on the
+ * bus the device is and figure out what CPLD pin it is
+ * being routed to.
+ */
+#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
+
+static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	u8 bus = dev->bus->number;
+	u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
+	struct pci_bus *tmp_bus = dev->bus;
+
+	/* Primary bus, no interrupts here */
+	if (!bus)
+		return -1;
+
+	/* Lookup first leaf in bus tree */
+	while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
+		tmp_bus = tmp_bus->parent;
+
+	/* Select between known bridges */
+	switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
+		/* Device is located after first bridge */
+	case 0x0008:
+		if (tmp_bus == dev->bus) {
+			/* Device is located directy after first bridge */
+			switch (devpin) {
+				/* Onboard 82546 */
+			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
+				return IRQ_IXDP2351_INTA_82546;
+			case DEVPIN(1, 2):	/* Onboard 82546 ch 1 */
+				return IRQ_IXDP2351_INTB_82546;
+				/* PMC SLOT */
+			case DEVPIN(0, 1):	/* PMCP INTA# */
+			case DEVPIN(2, 4):	/* PMCS INTD# */
+				return IRQ_IXDP2351_SPCI_PMC_INTA;
+			case DEVPIN(0, 2):	/* PMCP INTB# */
+			case DEVPIN(2, 1):	/* PMCS INTA# */
+				return IRQ_IXDP2351_SPCI_PMC_INTB;
+			case DEVPIN(0, 3):	/* PMCP INTC# */
+			case DEVPIN(2, 2):	/* PMCS INTB# */
+				return IRQ_IXDP2351_SPCI_PMC_INTC;
+			case DEVPIN(0, 4):	/* PMCP INTD# */
+			case DEVPIN(2, 3):	/* PMCS INTC# */
+				return IRQ_IXDP2351_SPCI_PMC_INTD;
+			}
+		} else {
+			/* Device is located indirectly after first bridge */
+			/* Not supported now */
+			return -1;
+		}
+		break;
+	case 0x0010:
+		if (tmp_bus == dev->bus) {
+			/* Device is located directy after second bridge */
+			/* Secondary bus of second bridge */
+			switch (devpin) {
+			case DEVPIN(0, 1):	/* DB#0 */
+			case DEVPIN(0, 2):
+			case DEVPIN(0, 3):
+			case DEVPIN(0, 4):
+				return IRQ_IXDP2351_SPCI_DB_0;
+			case DEVPIN(1, 1):	/* DB#1 */
+			case DEVPIN(1, 2):
+			case DEVPIN(1, 3):
+			case DEVPIN(1, 4):
+				return IRQ_IXDP2351_SPCI_DB_1;
+			case DEVPIN(2, 1):	/* FIC1 */
+			case DEVPIN(2, 2):
+			case DEVPIN(2, 3):
+			case DEVPIN(2, 4):
+			case DEVPIN(3, 1):	/* FIC2 */
+			case DEVPIN(3, 2):
+			case DEVPIN(3, 3):
+			case DEVPIN(3, 4):
+				return IRQ_IXDP2351_SPCI_FIC;
+			}
+		} else {
+			/* Device is located indirectly after second bridge */
+			/* Not supported now */
+			return -1;
+		}
+		break;
+	}
+
+	return -1;
+}
+
+struct hw_pci ixdp2351_pci __initdata = {
+	.nr_controllers	= 1,
+	.preinit	= ixp23xx_pci_preinit,
+	.setup		= ixp23xx_pci_setup,
+	.scan		= ixp23xx_pci_scan_bus,
+	.map_irq	= ixdp2351_map_irq,
+};
+
+int __init ixdp2351_pci_init(void)
+{
+	if (machine_is_ixdp2351())
+		pci_common_init(&ixdp2351_pci);
+
+	return 0;
+}
+
+subsys_initcall(ixdp2351_pci_init);
+
+/*
+ * IXDP2351 Static Mapped I/O
+ */
+static struct map_desc ixdp2351_io_desc[] __initdata = {
+	{
+		.virtual	= IXDP2351_NP_VIRT_BASE,
+		.pfn		= __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
+		.length		= IXDP2351_NP_PHYS_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IXDP2351_BB_BASE_VIRT,
+		.pfn		= __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
+		.length		= IXDP2351_BB_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init ixdp2351_map_io(void)
+{
+	ixp23xx_map_io();
+	iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
+}
+
+static void __init ixdp2351_init(void)
+{
+	physmap_configure(0x90000000, 0x04000000, 1, NULL);
+
+	/*
+	 * Mark flash as writeable
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixdp2351_map_io,
+	.init_irq	= ixdp2351_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= ixdp2351_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
new file mode 100644
index 00000000000..5330ad78c1b
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...)	printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+	u32 *paddress;
+
+	/*
+	 * Must be dword aligned
+	 */
+	where &= ~3;
+
+	/*
+	 * For top bus, generate type 0, else type 1
+	 */
+	if (!bus_nr) {
+		if (PCI_SLOT(devfn) >= 8)
+			return 0;
+
+		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+				    | (1 << (PCI_SLOT(devfn) + 16))
+				    | (PCI_FUNC(devfn) << 8) | where);
+	} else {
+		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+				    | (bus_nr << 16)
+				    | (PCI_SLOT(devfn) << 11)
+				    | (PCI_FUNC(devfn) << 8) | where);
+	}
+
+	return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+	/*0*/	0,
+	/*1*/	0xff,
+	/*2*/	0xffff,
+	/*3*/	0,
+	/*4*/	0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 *value)
+{
+	u32 n;
+	u32 *addr;
+
+	n = where % 4;
+
+	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	pci_master_aborts = 0;
+	*value = (*addr >> (8*n)) & bytemask[size];
+	if (pci_master_aborts) {
+			pci_master_aborts = 0;
+			*value = 0xffffffff;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+					int where, int size, u32 value)
+{
+	u32 mask;
+	u32 *addr;
+	u32 temp;
+
+	mask = ~(bytemask[size] << ((where % 0x4) * 8));
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	temp = (u32) (value) << ((where % 0x4) * 8);
+	*addr = (*addr & mask) | temp;
+
+	clear_master_aborts();
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+	.read	= ixp23xx_pci_read_config,
+	.write	= ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+	return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	volatile unsigned long temp;
+	unsigned long flags;
+
+	pci_master_aborts = 1;
+
+	local_irq_save(flags);
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+	local_irq_restore(flags);
+
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	return 0;
+}
+
+int clear_master_aborts(void)
+{
+	volatile u32 temp;
+
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+
+	return 0;
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+#ifdef __ARMEB__
+	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
+#endif
+	/*
+	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
+	 */
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+	/*
+	 * Select correct memory for PCI inbound transactions
+	 */
+	if (ixp23xx_cpp_boot()) {
+		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+	} else {
+		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+	}
+
+	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+			"PCI config cycle to non-existent device");
+
+	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+	int i;
+
+	dev->class &= 0xff;
+	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end   = 0;
+		dev->resource[i].flags = 0;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+	.start	= IXP23XX_PCI_MEM_START,
+	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+	.name	= "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+	.start	= 0x00000100,
+	.end	= 0x01ffffff,
+	.flags	= IORESOURCE_IO,
+	.name	= "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	if (nr >= 1)
+		return 0;
+
+	sys->resource[0] = &ixp23xx_pci_io_space;
+	sys->resource[1] = &ixp23xx_pci_mem_space;
+	sys->resource[2] = NULL;
+
+	return 1;
+}
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
new file mode 100644
index 00000000000..43c14e74079
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ixp23xx/roadrunner.c
+ *
+ * RoadRunner board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * Interrupt mapping
+ */
+#define INTA		IRQ_ROADRUNNER_PCI_INTA
+#define INTB		IRQ_ROADRUNNER_PCI_INTB
+#define INTC		IRQ_ROADRUNNER_PCI_INTC
+#define INTD		IRQ_ROADRUNNER_PCI_INTD
+
+#define INTC_PIN	IXP23XX_GPIO_PIN_11
+#define INTD_PIN	IXP23XX_GPIO_PIN_12
+
+static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+	static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
+	static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
+	static int usb_irq[] = {INTB, INTC, INTD, -1};
+	static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
+	static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
+
+	switch(dev->bus->number) {
+		case 0:
+			switch(dev->devfn) {
+			case 0x0: // PCI-PCI bridge
+				break;
+			case 0x8: // PCI Card Slot
+				return pci_card_slot_irq[pin - 1];
+			case 0x10: // PMC Slot
+				return pmc_card_slot_irq[pin - 1];
+			case 0x18: // PMC Slot Secondary Agent
+				break;
+			case 0x20: // IXP Processor
+				break;
+			default:
+				return NO_IRQ;
+			}
+			break;
+
+		case 1:
+			switch(dev->devfn) {
+			case 0x0: // IDE Controller
+				return (pin == 1) ? INTC : -1;
+			case 0x8: // USB fun 0
+			case 0x9: // USB fun 1
+			case 0xa: // USB fun 2
+				return usb_irq[pin - 1];
+			case 0x10: // Mini PCI 1
+				return mini_pci_1_irq[pin-1];
+			case 0x18: // Mini PCI 2
+				return mini_pci_2_irq[pin-1];
+			case 0x20: // MEM slot
+				return (pin == 1) ? INTA : -1;
+			default:
+				return NO_IRQ;
+			}
+			break;
+
+		default:
+			return NO_IRQ;
+	}
+
+	return NO_IRQ;
+}
+
+static void roadrunner_pci_preinit(void)
+{
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+
+	ixp23xx_pci_preinit();
+}
+
+static struct hw_pci roadrunner_pci __initdata = {
+	.nr_controllers	= 1,
+	.preinit	= roadrunner_pci_preinit,
+	.setup		= ixp23xx_pci_setup,
+	.scan		= ixp23xx_pci_scan_bus,
+	.map_irq	= roadrunner_map_irq,
+};
+
+static int __init roadrunner_pci_init(void)
+{
+	if (machine_is_roadrunner())
+		pci_common_init(&roadrunner_pci);
+
+	return 0;
+};
+
+subsys_initcall(roadrunner_pci_init);
+
+static void __init roadrunner_init(void)
+{
+	physmap_configure(0x90000000, 0x04000000, 2, NULL);
+
+	/*
+	 * Mark flash as writeable
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
+	/* Maintainer: Deepak Saxena */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixp23xx_map_io,
+	.init_irq	= ixp23xx_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= roadrunner_init,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index 60d5f8a3339..7520e602d7a 100644
--- a/arch/arm/mach-omap1/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -141,7 +141,7 @@ static int __init netstar_late_init(void)
 	/* TODO: Setup front panel switch here */
 
 	/* Setup panic notifier */
-	notifier_chain_register(&panic_notifier_list, &panic_block);
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index bfd5fdd1a87..52e4a9d6964 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -235,7 +235,7 @@ static struct notifier_block panic_block = {
 static int __init voiceblue_setup(void)
 {
 	/* Setup panic notifier */
-	notifier_chain_register(&panic_notifier_list, &panic_block);
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index c1d77f5b382..0104fd142e7 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -10,6 +10,11 @@ config ARCH_LUBBOCK
 	select PXA25x
 	select SA1111
 
+config MACH_LOGICPD_PXA270
+	bool "LogicPD PXA270 Card Engine Development Platform"
+	select PXA27x
+	select IWMMXT
+
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 382644401a4..4e8a983e2b8 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 9b48a90aefc..5efa84749f3 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -319,6 +319,11 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
 	pxaficp_device.dev.platform_data = info;
 }
 
+static struct platform_device pxartc_device = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
@@ -329,6 +334,7 @@ static struct platform_device *devices[] __initdata = {
 	&pxaficp_device,
 	&i2c_device,
 	&i2s_device,
+	&pxartc_device,
 };
 
 static int __init pxa_init(void)
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
new file mode 100644
index 00000000000..ec0f43a102c
--- /dev/null
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -0,0 +1,393 @@
+/*
+ * linux/arch/arm/mach-pxa/lpd270.c
+ *
+ * Support for the LogicPD PXA270 Card Engine.
+ * Derived from the mainstone code, which carries these notices:
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 05, 2002
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/lpd270.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+
+static unsigned int lpd270_irq_enabled;
+
+static void lpd270_mask_irq(unsigned int irq)
+{
+	int lpd270_irq = irq - LPD270_IRQ(0);
+
+	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
+
+	lpd270_irq_enabled &= ~(1 << lpd270_irq);
+	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static void lpd270_unmask_irq(unsigned int irq)
+{
+	int lpd270_irq = irq - LPD270_IRQ(0);
+
+	lpd270_irq_enabled |= 1 << lpd270_irq;
+	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static struct irqchip lpd270_irq_chip = {
+	.ack		= lpd270_mask_irq,
+	.mask		= lpd270_mask_irq,
+	.unmask		= lpd270_unmask_irq,
+};
+
+static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc,
+				  struct pt_regs *regs)
+{
+	unsigned long pending;
+
+	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
+	do {
+		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+		if (likely(pending)) {
+			irq = LPD270_IRQ(0) + __ffs(pending);
+			desc = irq_desc + irq;
+			desc_handle_irq(irq, desc, regs);
+
+			pending = __raw_readw(LPD270_INT_STATUS) &
+						lpd270_irq_enabled;
+		}
+	} while (pending);
+}
+
+static void __init lpd270_init_irq(void)
+{
+	int irq;
+
+	pxa_init_irq();
+
+	__raw_writew(0, LPD270_INT_MASK);
+	__raw_writew(0, LPD270_INT_STATUS);
+
+	/* setup extra LogicPD PXA270 irqs */
+	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
+		set_irq_chip(irq, &lpd270_irq_chip);
+		set_irq_handler(irq, do_level_IRQ);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+	set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
+	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+}
+
+
+#ifdef CONFIG_PM
+static int lpd270_irq_resume(struct sys_device *dev)
+{
+	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+	return 0;
+}
+
+static struct sysdev_class lpd270_irq_sysclass = {
+	set_kset_name("cpld_irq"),
+	.resume = lpd270_irq_resume,
+};
+
+static struct sys_device lpd270_irq_device = {
+	.cls = &lpd270_irq_sysclass,
+};
+
+static int __init lpd270_irq_device_init(void)
+{
+	int ret = sysdev_class_register(&lpd270_irq_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&lpd270_irq_device);
+	return ret;
+}
+
+device_initcall(lpd270_irq_device_init);
+#endif
+
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= LPD270_ETH_PHYS,
+		.end	= (LPD270_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= LPD270_ETHERNET_IRQ,
+		.end	= LPD270_ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device lpd270_audio_device = {
+	.name		= "pxa2xx-ac97",
+	.id		= -1,
+};
+
+static struct resource lpd270_flash_resources[] = {
+	[0] = {
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition lpd270_flash0_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000,
+	}, {
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	},
+};
+
+static struct flash_platform_data lpd270_flash_data[2] = {
+	{
+		.name		= "processor-flash",
+		.map_name	= "cfi_probe",
+		.parts		= lpd270_flash0_partitions,
+		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
+	}, {
+		.name		= "mainboard-flash",
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device lpd270_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data	= &lpd270_flash_data[0],
+		},
+		.resource	= &lpd270_flash_resources[0],
+		.num_resources	= 1,
+	}, {
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data	= &lpd270_flash_data[1],
+		},
+		.resource	= &lpd270_flash_resources[1],
+		.num_resources	= 1,
+	},
+};
+
+static void lpd270_backlight_power(int on)
+{
+	if (on) {
+		pxa_gpio_mode(GPIO16_PWM0_MD);
+		pxa_set_cken(CKEN0_PWM0, 1);
+		PWM_CTRL0 = 0;
+		PWM_PWDUTY0 = 0x3ff;
+		PWM_PERVAL0 = 0x3ff;
+	} else {
+		PWM_CTRL0 = 0;
+		PWM_PWDUTY0 = 0x0;
+		PWM_PERVAL0 = 0x3FF;
+		pxa_set_cken(CKEN0_PWM0, 0);
+	}
+}
+
+/* 5.7" TFT QVGA (LoLo display number 1) */
+static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
+	.pixclock		= 100000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 64,
+	.left_margin		= 0x27,
+	.right_margin		= 0x09,
+	.vsync_len		= 0x04,
+	.upper_margin		= 0x08,
+	.lower_margin		= 0x14,
+	.sync			= 0,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x04400007,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 6.4" TFT VGA (LoLo display number 5) */
+static struct pxafb_mach_info sharp_lq64d343 __initdata = {
+	.pixclock		= 20000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 49,
+	.left_margin		= 0x89,
+	.right_margin		= 0x19,
+	.vsync_len		= 18,
+	.upper_margin		= 0x22,
+	.lower_margin		= 0,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x04400001,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 3.5" TFT QVGA (LoLo display number 8) */
+static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
+	.pixclock		= 100000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 0x34,
+	.left_margin		= 0x09,
+	.right_margin		= 0x09,
+	.vsync_len		= 0x08,
+	.upper_margin		= 0x05,
+	.lower_margin		= 0x14,
+	.sync			= 0,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x04400007,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&smc91x_device,
+	&lpd270_audio_device,
+	&lpd270_flash_device[0],
+	&lpd270_flash_device[1],
+};
+
+static int lpd270_ohci_init(struct device *dev)
+{
+	/* setup Port1 GPIO pin. */
+	pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
+	pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
+
+	/* Set the Power Control Polarity Low and Power Sense
+	   Polarity Low to active low. */
+	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+	return 0;
+}
+
+static struct pxaohci_platform_data lpd270_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= lpd270_ohci_init,
+};
+
+static void __init lpd270_init(void)
+{
+	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	lpd270_flash_data[1].width = 4;
+
+	/*
+	 * System bus arbiter setting:
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	/*
+	 * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
+	 */
+	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	// set_pxa_fb_info(&sharp_lq057q3dc02);
+	set_pxa_fb_info(&sharp_lq64d343);
+	// set_pxa_fb_info(&sharp_lq035q7db02_20);
+
+	pxa_set_ohci_info(&lpd270_ohci_platform_data);
+}
+
+
+static struct map_desc lpd270_io_desc[] __initdata = {
+	{
+		.virtual	= LPD270_CPLD_VIRT,
+		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
+		.length		= LPD270_CPLD_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init lpd270_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
+
+	/* initialize sleep mode regs (wake-up sources, etc) */
+	PGSR0 = 0x00008800;
+	PGSR1 = 0x00000002;
+	PGSR2 = 0x0001FC00;
+	PGSR3 = 0x00001F81;
+	PWER  = 0xC0000002;
+	PRER  = 0x00000002;
+	PFER  = 0x00000002;
+
+	/* for use I SRAM as framebuffer.  */
+	PSLR |= 0x00000F04;
+	PCFR  = 0x00000066;
+}
+
+MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
+	/* Maintainer: Peter Barada */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= lpd270_map_io,
+	.init_irq	= lpd270_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= lpd270_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 30ec317bbb9..0dbb079ecd2 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -467,6 +467,8 @@ struct platform_device akitaioexp_device = {
 	.id		= -1,
 };
 
+EXPORT_SYMBOL_GPL(akitaioexp_device);
+
 static void __init akita_init(void)
 {
 	spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 6923316b3d0..cd67ab1b217 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -111,7 +111,7 @@ config SA1100_LART
 	bool "LART"
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
-	  (also known as the LART).  See <http://www.lart.tudelft.nl/> for
+	  (also known as the LART).  See <http://www.lartmaker.nl/> for
 	  information on the LART.
 
 config SA1100_PLEB
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 6435b2e48ff..d68630b74d7 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -11,7 +11,7 @@
  *     linux-2.4.5-rmk1
  *
  * This software has been developed while working on the LART
- * computing board (http://www.lart.tudelft.nl/), which is
+ * computing board (http://www.lartmaker.nl/), which is
  * sponsored by the Mobile Multi-media Communications
  * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications 
  * (http://www.ubicom.tudelft.nl/) projects.
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 2abdc419e98..9ea71551fc0 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -324,6 +324,11 @@ void sa11x0_set_irda_data(struct irda_platform_data *irda)
 	sa11x0ir_device.dev.platform_data = irda;
 }
 
+static struct platform_device sa11x0rtc_device = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+};
+
 static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
@@ -333,6 +338,7 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0pcmcia_device,
 	&sa11x0fb_device,
 	&sa11x0mtd_device,
+	&sa11x0rtc_device,
 };
 
 static int __init sa1100_init(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e680c5fd93b..c55b739e10b 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -239,6 +239,17 @@ config CPU_XSCALE
 	select CPU_CACHE_VIVT
 	select CPU_TLB_V4WBI
 
+# XScale Core Version 3
+config CPU_XSC3
+	bool
+	depends on ARCH_IXP23XX
+	default y
+	select CPU_32v5
+	select CPU_ABRT_EV5T
+	select CPU_CACHE_VIVT
+	select CPU_TLB_V4WBI
+	select IO_36
+
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
@@ -361,11 +372,17 @@ config CPU_TLB_V4WBI
 config CPU_TLB_V6
 	bool
 
+#
+# CPU supports 36-bit I/O
+#
+config IO_36
+	bool
+
 comment "Processor Features"
 
 config ARM_THUMB
 	bool "Support Thumb user binaries"
-	depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6
+	depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
 	default y
 	help
 	  Say Y if you want to include kernel support for running user space
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index ffe73ba2bf1..07a53850578 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
 obj-$(CONFIG_CPU_COPY_V6)	+= copypage-v6.o mmu.o
 obj-$(CONFIG_CPU_SA1100)	+= copypage-v4mc.o
 obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
+obj-$(CONFIG_CPU_XSC3)		+= copypage-xsc3.o
 
 obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
 obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
@@ -51,4 +52,5 @@ obj-$(CONFIG_CPU_ARM1026)	+= proc-arm1026.o
 obj-$(CONFIG_CPU_SA110)		+= proc-sa110.o
 obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
+obj-$(CONFIG_CPU_XSC3)		+= proc-xsc3.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
diff --git a/arch/arm/mm/copypage-xsc3.S b/arch/arm/mm/copypage-xsc3.S
new file mode 100644
index 00000000000..9a2cb4332b4
--- /dev/null
+++ b/arch/arm/mm/copypage-xsc3.S
@@ -0,0 +1,97 @@
+/*
+ *  linux/arch/arm/lib/copypage-xsc3.S
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adapted for 3rd gen XScale core, no more mini-dcache
+ * Author: Matt Gilbert (matthew.m.gilbert@intel.com)
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * General note:
+ *  We don't really want write-allocate cache behaviour for these functions
+ *  since that will just eat through 8K of the cache.
+ */
+
+	.text
+	.align	5
+/*
+ * XSC3 optimised copy_user_page
+ *  r0 = destination
+ *  r1 = source
+ *  r2 = virtual user address of ultimate destination page
+ *
+ * The source page may have some clean entries in the cache already, but we
+ * can safely ignore them - break_cow() will flush them out of the cache
+ * if we eventually end up using our copied page.
+ *
+ */
+ENTRY(xsc3_mc_copy_user_page)
+	stmfd	sp!, {r4, r5, lr}
+	mov	lr, #PAGE_SZ/64-1
+
+	pld	[r1, #0]
+	pld	[r1, #32]
+1:	pld	[r1, #64]
+	pld	[r1, #96]
+
+2:	ldrd	r2, [r1], #8
+	mov	ip, r0
+	ldrd	r4, [r1], #8
+	mcr	p15, 0, ip, c7, c6, 1		@ invalidate
+	strd	r2, [r0], #8
+	ldrd	r2, [r1], #8
+	strd	r4, [r0], #8
+	ldrd	r4, [r1], #8
+	strd	r2, [r0], #8
+	strd	r4, [r0], #8
+	ldrd	r2, [r1], #8
+	mov	ip, r0
+	ldrd	r4, [r1], #8
+	mcr	p15, 0, ip, c7, c6, 1		@ invalidate
+	strd	r2, [r0], #8
+	ldrd	r2, [r1], #8
+	subs	lr, lr, #1
+	strd	r4, [r0], #8
+	ldrd	r4, [r1], #8
+	strd	r2, [r0], #8
+	strd	r4, [r0], #8
+	bgt	1b
+	beq	2b
+
+	ldmfd	sp!, {r4, r5, pc}
+
+	.align	5
+/*
+ * XScale optimised clear_user_page
+ *  r0 = destination
+ *  r1 = virtual user address of ultimate destination page
+ */
+ENTRY(xsc3_mc_clear_user_page)
+	mov	r1, #PAGE_SZ/32
+	mov	r2, #0
+	mov	r3, #0
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate line
+	strd	r2, [r0], #8
+	strd	r2, [r0], #8
+	strd	r2, [r0], #8
+	strd	r2, [r0], #8
+	subs	r1, r1, #1
+	bne	1b
+	mov	pc, lr
+
+	__INITDATA
+
+	.type	xsc3_mc_user_fns, #object
+ENTRY(xsc3_mc_user_fns)
+	.long	xsc3_mc_clear_user_page
+	.long	xsc3_mc_copy_user_page
+	.size	xsc3_mc_user_fns, . - xsc3_mc_user_fns
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index ef8d30a185a..5e5d05bcad5 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -557,7 +557,8 @@ void __init create_mapping(struct map_desc *md)
 	 *	supersections are only allocated for domain 0 regardless
 	 *	of the actual domain assignments in use.
 	 */
-	if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
+	if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())
+		&& domain == 0) {
 		/*
 		 * Align to supersection boundary if !high pages.
 		 * High pages have already been checked for proper
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 9a7e7c096aa..ee6f1529873 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -21,6 +21,14 @@
 
 #define D_CACHE_LINE_SIZE	32
 
+#define TTB_C		(1 << 0)
+#define TTB_S		(1 << 1)
+#define TTB_IMP		(1 << 2)
+#define TTB_RGN_NC	(0 << 3)
+#define TTB_RGN_WBWA	(1 << 3)
+#define TTB_RGN_WT	(2 << 3)
+#define TTB_RGN_WB	(3 << 3)
+
 	.macro	cpsie, flags
 	.ifc \flags, f
 	.long	0xf1080040
@@ -115,7 +123,7 @@ ENTRY(cpu_v6_switch_mm)
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
 #ifdef CONFIG_SMP
-	orr	r0, r0, #2			@ set shared pgtable
+	orr	r0, r0, #TTB_RGN_WBWA|TTB_S	@ mark PTWs shared, outer cacheable
 #endif
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
@@ -161,8 +169,8 @@ ENTRY(cpu_v6_set_pte)
 	tst	r1, #L_PTE_YOUNG
 	biceq	r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
 
-@	tst	r1, #L_PTE_EXEC
-@	orreq	r2, r2, #PTE_EXT_XN
+	tst	r1, #L_PTE_EXEC
+	orreq	r2, r2, #PTE_EXT_XN
 
 	tst	r1, #L_PTE_PRESENT
 	moveq	r2, #0
@@ -221,7 +229,7 @@ __v6_setup:
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
 #ifdef CONFIG_SMP
-	orr	r4, r4, #2			@ set shared pgtable
+	orr	r4, r4, #TTB_RGN_WBWA|TTB_S	@ mark PTWs shared, outer cacheable
 #endif
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 #ifdef CONFIG_VFP
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
new file mode 100644
index 00000000000..f90513e9af0
--- /dev/null
+++ b/arch/arm/mm/proc-xsc3.S
@@ -0,0 +1,498 @@
+/*
+ * linux/arch/arm/mm/proc-xsc3.S
+ *
+ * Original Author: Matthew Gilbert
+ * Current Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (C) Intel Corp.
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for the Intel XScale3 Core (XSC3).  The XSC3 core is an
+ * extension to Intel's original XScale core that adds the following
+ * features:
+ *
+ * - ARMv6 Supersections
+ * - Low Locality Reference pages (replaces mini-cache)
+ * - 36-bit addressing
+ * - L2 cache
+ * - Cache-coherency if chipset supports it
+ *
+ * Based on orignal XScale code by Nicolas Pitre
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed.  If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define MAX_AREA_SIZE	32768
+
+/*
+ * The cache line size of the I and D cache.
+ */
+#define CACHELINESIZE	32
+
+/*
+ * The size of the data cache.
+ */
+#define CACHESIZE	32768
+
+/*
+ * Run with L2 enabled.
+ */
+#define L2_CACHE_ENABLE	1
+
+/*
+ * Enable the Branch Target Buffer (can cause crashes, see erratum #42.)
+ */
+#define BTB_ENABLE	0
+
+/*
+ * This macro is used to wait for a CP15 write and is needed
+ * when we have to ensure that the last operation to the co-pro
+ * was completed before continuing with operation.
+ */
+	.macro	cpwait_ret, lr, rd
+	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
+	sub	pc, \lr, \rd, LSR #32		@ wait for completion and
+						@ flush instruction pipeline
+	.endm
+
+/*
+ * This macro cleans & invalidates the entire xsc3 dcache by set & way.
+ */
+
+ 	.macro  clean_d_cache rd, rs
+	mov	\rd, #0x1f00
+	orr	\rd, \rd, #0x00e0
+1:	mcr	p15, 0, \rd, c7, c14, 2		@ clean/inv set/way
+	adds	\rd, \rd, #0x40000000
+	bcc	1b
+	subs	\rd, \rd, #0x20
+	bpl	1b
+	.endm
+
+	.text
+
+/*
+ * cpu_xsc3_proc_init()
+ *
+ * Nothing too exciting at the moment
+ */
+ENTRY(cpu_xsc3_proc_init)
+	mov	pc, lr
+
+/*
+ * cpu_xsc3_proc_fin()
+ */
+ENTRY(cpu_xsc3_proc_fin)
+	str	lr, [sp, #-4]!
+	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+	msr	cpsr_c, r0
+	bl	xsc3_flush_kern_cache_all	@ clean caches
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1800			@ ...IZ...........
+	bic	r0, r0, #0x0006			@ .............CA.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldr	pc, [sp], #4
+
+/*
+ * cpu_xsc3_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_xsc3_reset)
+	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+	msr	cpsr_c, r1			@ reset CPSR
+	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
+	bic	r1, r1, #0x0086			@ ........B....CA.
+	bic	r1, r1, #0x3900			@ ..VIZ..S........
+	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
+	bic	r1, r1, #0x0001			@ ...............M
+	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
+	@ CAUTION: MMU turned off from this point.  We count on the pipeline
+	@ already containing those two last instructions to survive.
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, r0
+
+/*
+ * cpu_xsc3_do_idle()
+ *
+ * Cause the processor to idle
+ *
+ * For now we do nothing but go to idle mode for every case
+ *
+ * XScale supports clock switching, but using idle mode support
+ * allows external hardware to react to system state changes.
+
+ MMG: Come back to this one.
+ */
+	.align	5
+
+ENTRY(cpu_xsc3_do_idle)
+	mov	r0, #1
+	mcr	p14, 0, r0, c7, c0, 0		@ Go to IDLE
+	mov	pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Invalidate all cache entries in a particular address
+ *	space.
+ */
+ENTRY(xsc3_flush_user_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(xsc3_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+	clean_d_cache r0, r1
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
+	mcrne	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, vm_flags)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end	- end address (exclusive, may not be aligned)
+ *	- vma	- vma_area_struct describing address space
+ */
+	.align	5
+ENTRY(xsc3_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #MAX_AREA_SIZE
+	bhs	__flush_whole_cache
+
+1:	tst	r2, #VM_EXEC
+	mcrne	p15, 0, r0, c7, c5, 1		@ Invalidate I cache line
+	mcr	p15, 0, r0, c7, c14, 1		@ Clean/invalidate D cache line
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 6		@ Invalidate BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
+	mcrne	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ *
+ *	Note: single I-cache line invalidation isn't used here since
+ *	it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xsc3_coherent_kern_range)
+/* FALLTHROUGH */
+ENTRY(xsc3_coherent_user_range)
+	bic	r0, r0, #CACHELINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c5, 4		@ Prefetch Flush
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(xsc3_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+1:	mcr	p15, 0, r0, c7, c14, 1		@ Clean/Invalidate D Cache line
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c5, 4		@ Prefetch Flush
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(xsc3_dma_inv_range)
+	tst	r0, #CACHELINESIZE - 1
+	bic	r0, r0, #CACHELINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D entry
+	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 D entry
+	tst	r1, #CACHELINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D entry
+	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 D entry
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D entry
+	mcr	p15, 1, r0, c7, c7, 1		@ Invalidate L2 D cache line
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(xsc3_dma_clean_range)
+	bic	r0, r0, #CACHELINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D entry
+	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 D entry
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(xsc3_dma_flush_range)
+	bic	r0, r0, #CACHELINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c14, 1	@ Clean/invalidate L1 D cache line
+	mcr	p15, 1, r0, c7, c11, 1	@ Clean L2 D cache line
+	mcr	p15, 1, r0, c7, c7, 1	@ Invalidate L2 D cache line
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mov	pc, lr
+
+ENTRY(xsc3_cache_fns)
+	.long	xsc3_flush_kern_cache_all
+	.long	xsc3_flush_user_cache_all
+	.long	xsc3_flush_user_cache_range
+	.long	xsc3_coherent_kern_range
+	.long	xsc3_coherent_user_range
+	.long	xsc3_flush_kern_dcache_page
+	.long	xsc3_dma_inv_range
+	.long	xsc3_dma_clean_range
+	.long	xsc3_dma_flush_range
+
+ENTRY(cpu_xsc3_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHELINESIZE
+	subs	r1, r1, #CACHELINESIZE
+	bhi	1b
+	mov	pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_xsc3_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_xsc3_switch_mm)
+	clean_d_cache r1, r2
+	mcr	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+#ifdef L2_CACHE_ENABLE
+	orr	r0, r0, #0x18			@ cache the page table in L2
+#endif
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	cpwait_ret lr, ip
+
+/*
+ * cpu_xsc3_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ *
+ */
+	.align	5
+ENTRY(cpu_xsc3_set_pte)
+	str	r1, [r0], #-2048		@ linux version
+
+	bic	r2, r1, #0xff0
+	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
+
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	tst	r3, #L_PTE_USER			@ User?
+	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
+
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
+	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
+						@ combined with user -> user r/w
+
+#if L2_CACHE_ENABLE
+	@ If its cacheable it needs to be in L2 also.
+	eor	ip, r1, #L_PTE_CACHEABLE
+	tst	ip, #L_PTE_CACHEABLE
+	orreq	r2, r2, #PTE_EXT_TEX(0x5)
+#endif
+
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
+	movne	r2, #0				@ no -> fault
+
+	str	r2, [r0]			@ hardware version
+	mov	ip, #0
+	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line mcr
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
+	mov	pc, lr
+
+	.ltorg
+
+	.align
+
+	__INIT
+
+	.type	__xsc3_setup, #function
+__xsc3_setup:
+	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+	msr	cpsr_c, r0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I, D caches & BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I, D TLBs
+#if L2_CACHE_ENABLE
+	orr	r4, r4, #0x18			@ cache the page table in L2
+#endif
+	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+	mov	r0, #1				@ Allow access to CP0 and CP13
+	orr	r0, r0, #1 << 13		@ Its undefined whether this
+	mcr	p15, 0, r0, c15, c1, 0		@ affects USR or SVC modes
+	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
+	and	r0, r0, #2			@ preserve bit P bit setting
+#if L2_CACHE_ENABLE
+	orr	r0, r0, #(1 << 10)		@ enable L2 for LLR cache
+#endif
+	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
+	mrc	p15, 0, r0, c1, c0, 0		@ get control register
+	bic	r0, r0, #0x0200			@ .... ..R. .... ....
+	bic	r0, r0, #0x0002			@ .... .... .... ..A.
+	orr	r0, r0, #0x0005			@ .... .... .... .C.M
+#if BTB_ENABLE
+	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
+#else
+	orr	r0, r0, #0x3100			@ ..VI ...S .... ....
+#endif
+#if L2_CACHE_ENABLE
+	orr 	r0, r0, #0x4000000		@ L2 enable
+#endif
+	mov	pc, lr
+
+	.size	__xsc3_setup, . - __xsc3_setup
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+
+	.type	xsc3_processor_functions, #object
+ENTRY(xsc3_processor_functions)
+	.word	v5t_early_abort
+	.word	cpu_xsc3_proc_init
+	.word	cpu_xsc3_proc_fin
+	.word	cpu_xsc3_reset
+	.word	cpu_xsc3_do_idle
+	.word	cpu_xsc3_dcache_clean_area
+	.word	cpu_xsc3_switch_mm
+	.word	cpu_xsc3_set_pte
+	.size	xsc3_processor_functions, . - xsc3_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv5te"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v5"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_xsc3_name, #object
+cpu_xsc3_name:
+	.asciz	"XScale-Core3"
+	.size	cpu_xsc3_name, . - cpu_xsc3_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+
+	.type	__xsc3_proc_info,#object
+__xsc3_proc_info:
+	.long	0x69056000
+	.long	0xffffe000
+	.long	0x00000c0e
+	b	__xsc3_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_xsc3_name
+	.long	xsc3_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xsc3_mc_user_fns
+	.long	xsc3_cache_fns
+	.size	__xsc3_proc_info, . - __xsc3_proc_info