Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits)
  omap4: Add support for i2c init
  omap: Fix i2c platform init code for omap4
  OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
  OMAP powerdomain, hwmod, omap_device: add some credits
  OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
  OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate
  OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
  OMAP: timers: Fix clock source names for OMAP4
  OMAP4 clock: Support clk_set_parent
  OMAP4: PRCM: Add offset defines for all CM registers
  OMAP4: PRCM: Add offset defines for all PRM registers
  OMAP4: PRCM: Remove duplicate definition of base addresses
  OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
  OMAP4: CM: Remove non-functional registers in ES1.0
  OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  OMAP: hwmod: Rename hwmod name for the MPU
  OMAP: hwmod: Do not exit the iteration if one clock init failed
  OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
  OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value
  OMAP: hwmod: Fix wrong pointer iteration in oh->slaves
  ...

1 files changed, 72 insertions, 26 deletions

diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index f044b592750..eec2b4993c6 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -38,6 +38,7 @@
 #define OMAP2_I2C_BASE1		0x48070000
 #define OMAP2_I2C_BASE2		0x48072000
 #define OMAP2_I2C_BASE3		0x48060000
+#define OMAP4_I2C_BASE4		0x48350000
 
 static const char name[] = "i2c_omap";
 
@@ -54,11 +55,14 @@ static const char name[] = "i2c_omap";
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, 0) },
 #endif
-#if	defined(CONFIG_ARCH_OMAP3)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, 0) },
+#endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP4_I2C_BASE4, 0) },
 #endif
 };
 
@@ -76,12 +80,15 @@ static struct resource i2c_resources[][2] = {
 static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
 	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
 	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
 #endif
-#if	defined(CONFIG_ARCH_OMAP3)
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
 #endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_pdata[3]),
+#endif
 };
 
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
@@ -96,37 +103,60 @@ static int __init omap_i2c_nr_ports(void)
 		ports = 2;
 	else if (cpu_is_omap34xx())
 		ports = 3;
+	else if (cpu_is_omap44xx())
+		ports = 4;
 
 	return ports;
 }
 
-static int __init omap_i2c_add_bus(int bus_id)
+/* Shared between omap2 and 3 */
+static resource_size_t omap2_i2c_irq[3] __initdata = {
+	INT_24XX_I2C1_IRQ,
+	INT_24XX_I2C2_IRQ,
+	INT_34XX_I2C3_IRQ,
+};
+
+static resource_size_t omap4_i2c_irq[4] __initdata = {
+	OMAP44XX_IRQ_I2C1,
+	OMAP44XX_IRQ_I2C2,
+	OMAP44XX_IRQ_I2C3,
+	OMAP44XX_IRQ_I2C4,
+};
+
+static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
 {
-	struct platform_device *pdev;
 	struct omap_i2c_bus_platform_data *pd;
 	struct resource *res;
-	resource_size_t base, irq;
 
-	pdev = &omap_i2c_devices[bus_id - 1];
 	pd = pdev->dev.platform_data;
+	res = pdev->resource;
+	res[0].start = OMAP1_I2C_BASE;
+	res[0].end = res[0].start + OMAP_I2C_SIZE;
+	res[1].start = INT_I2C;
+	omap1_i2c_mux_pins(bus_id);
+
+	return platform_device_register(pdev);
+}
+
+static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
+{
+	struct resource *res;
+	resource_size_t *irq;
+
+	res = pdev->resource;
+
+	if (!cpu_is_omap44xx())
+		irq = omap2_i2c_irq;
+	else
+		irq = omap4_i2c_irq;
+
 	if (bus_id == 1) {
-		res = pdev->resource;
-		if (cpu_class_is_omap1()) {
-			base = OMAP1_I2C_BASE;
-			irq = INT_I2C;
-		} else {
-			base = OMAP2_I2C_BASE1;
-			irq = INT_24XX_I2C1_IRQ;
-		}
-		res[0].start = base;
-		res[0].end = base + OMAP_I2C_SIZE;
-		res[1].start = irq;
+		res[0].start = OMAP2_I2C_BASE1;
+		res[0].end = res[0].start + OMAP_I2C_SIZE;
 	}
 
-	if (cpu_class_is_omap1())
-		omap1_i2c_mux_pins(bus_id);
-	if (cpu_class_is_omap2())
-		omap2_i2c_mux_pins(bus_id);
+	res[1].start = irq[bus_id - 1];
+	omap2_i2c_mux_pins(bus_id);
 
 	/*
 	 * When waiting for completion of a i2c transfer, we need to
@@ -134,12 +164,28 @@ static int __init omap_i2c_add_bus(int bus_id)
 	 * ensure quick enough wakeup from idle, when transfer
 	 * completes.
 	 */
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx()) {
+		struct omap_i2c_bus_platform_data *pd;
+
+		pd = pdev->dev.platform_data;
 		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
+	}
 
 	return platform_device_register(pdev);
 }
 
+static int __init omap_i2c_add_bus(int bus_id)
+{
+	struct platform_device *pdev;
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+
+	if (cpu_class_is_omap1())
+		return omap1_i2c_add_bus(pdev, bus_id);
+	else
+		return omap2_i2c_add_bus(pdev, bus_id);
+}
+
 /**
  * omap_i2c_bus_setup - Process command line options for the I2C bus speed
  * @str: String of options