Merge branch 'imx/imx6q' into next/soc

Conflicts:
	Documentation/devicetree/bindings/arm/fsl.txt
	arch/arm/Kconfig
	arch/arm/Kconfig.debug
	arch/arm/plat-mxc/include/mach/common.h

6 files changed, 90 insertions, 34 deletions

diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index c850af3650e..83b745a5e1b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -13,6 +13,7 @@
 
 struct platform_device;
 struct clk;
+enum mxc_cpu_pwr_mode;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
@@ -66,6 +67,7 @@ extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx51_clocks_init_dt(void);
 extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);
@@ -88,6 +90,7 @@ extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
+void gic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
@@ -98,10 +101,36 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx50_handle_irq tzic_handle_irq
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
+#define imx6q_handle_irq gic_handle_irq
 
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
 extern void imx51_babbage_common_init(void);
 extern void imx53_ard_common_init(void);
 extern void imx53_evk_common_init(void);
 extern void imx53_qsb_common_init(void);
 extern void imx53_smd_common_init(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_pm_init(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index a3045937fc2..6e192c4a391 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -12,44 +12,20 @@
  */
 #include <mach/hardware.h>
 
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
 #define UART_PADDR	MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
 #define UART_PADDR	MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR	MX6Q_UART4_BASE_ADDR
 #endif
 
 #define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 842fbcb0d6c..9fe0dfcf4e7 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -22,3 +22,9 @@
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 	.endm
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	.endm
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	.endm
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index eba3118adfb..a599f01f8b9 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -91,6 +91,11 @@
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
+ * mx6q:
+ *	SCU	0x00a00000+0x001000	->	0xf4000000+0x001000
+ *	CCM	0x020c4000+0x004000	->	0xf42c4000+0x004000
+ *	ANATOP	0x020c8000+0x001000	->	0xf42c8000+0x001000
+ *	UART4	0x021f0000+0x004000	->	0xf42f0000+0x004000
  */
 #define IMX_IO_P2V(x)	(						\
 			0xf4000000 +					\
@@ -102,6 +107,7 @@
 
 #include <mach/mxc.h>
 
+#include <mach/mx6q.h>
 #include <mach/mx50.h>
 #include <mach/mx51.h>
 #include <mach/mx53.h>
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 00e812bbd81..fd9efb04465 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -14,9 +14,15 @@
 #include <asm-generic/gpio.h>
 
 /*
- * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
+ * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
+ * have 128 IRQs, and those with AVIC have 64.
+ *
+ * To support single image, the biggest number should be defined on
+ * top of the list.
  */
-#ifdef CONFIG_MXC_TZIC
+#if defined CONFIG_ARM_GIC
+#define MXC_INTERNAL_IRQS	160
+#elif defined CONFIG_MXC_TZIC
 #define MXC_INTERNAL_IRQS	128
 #else
 #define MXC_INTERNAL_IRQS	64
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
new file mode 100644
index 00000000000..254a561a279
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x)		IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR		0x00a00000
+#define MX6Q_SCU_SIZE			0x1000
+#define MX6Q_CCM_BASE_ADDR		0x020c4000
+#define MX6Q_CCM_SIZE			0x4000
+#define MX6Q_ANATOP_BASE_ADDR		0x020c8000
+#define MX6Q_ANATOP_SIZE		0x1000
+#define MX6Q_UART4_BASE_ADDR		0x021f0000
+#define MX6Q_UART4_SIZE			0x4000
+
+#endif	/* __MACH_MX6Q_H__ */