Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 119 insertions, 0 deletions

diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
new file mode 100644
index 00000000000..1dc13bc6d81
--- /dev/null
+++ b/arch/arm/nwfpe/entry.S
@@ -0,0 +1,119 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998
+    (c) 1998, 1999 Philip Blundell
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This is the kernel's entry point into the floating point emulator.
+It is called from the kernel with code similar to this:
+
+	sub	r4, r5, #4
+	ldrt	r0, [r4]			@ r0  = instruction
+	adrsvc	al, r9, ret_from_exception	@ r9  = normal FP return
+	adrsvc	al, lr, fpundefinstr		@ lr  = undefined instr return
+
+	get_current_task r10
+	mov	r8, #1
+	strb	r8, [r10, #TSK_USED_MATH]	@ set current->used_math
+	add	r10, r10, #TSS_FPESAVE		@ r10 = workspace
+	ldr	r4, .LC2
+	ldr	pc, [r4]			@ Call FP emulator entry point
+
+The kernel expects the emulator to return via one of two possible
+points of return it passes to the emulator.  The emulator, if
+successful in its emulation, jumps to ret_from_exception (passed in
+r9) and the kernel takes care of returning control from the trap to
+the user code.  If the emulator is unable to emulate the instruction,
+it returns via _fpundefinstr (passed via lr) and the kernel halts the
+user program with a core dump.
+
+On entry to the emulator r10 points to an area of private FP workspace
+reserved in the thread structure for this process.  This is where the
+emulator saves its registers across calls.  The first word of this area
+is used as a flag to detect the first time a process uses floating point,
+so that the emulator startup cost can be avoided for tasks that don't
+want it.
+
+This routine does three things:
+
+1) The kernel has created a struct pt_regs on the stack and saved the
+user registers into it.  See /usr/include/asm/proc/ptrace.h for details.
+
+2) It calls EmulateAll to emulate a floating point instruction.
+EmulateAll returns 1 if the emulation was successful, or 0 if not.
+
+3) If an instruction has been emulated successfully, it looks ahead at
+the next instruction.  If it is a floating point instruction, it
+executes the instruction, without returning to user space.  In this
+way it repeatedly looks ahead and executes floating point instructions
+until it encounters a non floating point instruction, at which time it
+returns via _fpreturn.
+
+This is done to reduce the effect of the trap overhead on each
+floating point instructions.  GCC attempts to group floating point
+instructions to allow the emulator to spread the cost of the trap over
+several floating point instructions.  */
+
+	.globl	nwfpe_enter
+nwfpe_enter:
+	mov	r4, lr			@ save the failure-return addresses
+	mov	sl, sp			@ we access the registers via 'sl'
+
+	ldr	r5, [sp, #60]		@ get contents of PC;
+emulate:
+	bl	EmulateAll		@ emulate the instruction
+	cmp	r0, #0			@ was emulation successful
+	moveq	pc, r4			@ no, return failure
+
+next:
+.Lx1:	ldrt	r6, [r5], #4		@ get the next instruction and
+					@ increment PC
+
+	and	r2, r6, #0x0F000000	@ test for FP insns
+	teq	r2, #0x0C000000
+	teqne	r2, #0x0D000000
+	teqne	r2, #0x0E000000
+	movne	pc, r9			@ return ok if not a fp insn
+
+	str	r5, [sp, #60]		@ update PC copy in regs
+
+	mov	r0, r6			@ save a copy
+	ldr	r1, [sp, #64]		@ fetch the condition codes
+	bl	checkCondition		@ check the condition
+	cmp	r0, #0			@ r0 = 0 ==> condition failed
+
+	@ if condition code failed to match, next insn
+	beq	next			@ get the next instruction;
+
+	mov	r0, r6			@ prepare for EmulateAll()
+	b	emulate			@ if r0 != 0, goto EmulateAll
+
+	@ We need to be prepared for the instructions at .Lx1 and .Lx2 
+	@ to fault.  Emit the appropriate exception gunk to fix things up.
+	@ ??? For some reason, faults can happen at .Lx2 even with a
+	@ plain LDR instruction.  Weird, but it seems harmless.
+	.section .fixup,"ax"
+	.align	2
+.Lfix:	mov	pc, r9			@ let the user eat segfaults
+	.previous
+
+	.section __ex_table,"a"
+	.align	3
+	.long	.Lx1, .Lfix
+	.previous