Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late cleanups from Arnd Bergmann:
 "These could not be part of the first cleanup branch, because they
  either came too late in the cycle, or they have dependencies on other
  branches.  Important changes are:

   - The integrator platform is almost multiplatform capable after some
     reorganization (Linus Walleij)
   - Minor cleanups on Zynq (Michal Simek)
   - Lots of changes for Exynos and other Samsung platforms, including
     further preparations for multiplatform support and the clocks
     bindings are rearranged"

* tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  devicetree: fix newly added exynos sata bindings
  ARM: EXYNOS: Fix compilation error in cpuidle.c
  ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h
  ARM: EXYNOS: Remove hardware.h file
  ARM: SAMSUNG: Remove hardware.h inclusion
  ARM: S3C24XX: Remove invalid code from hardware.h
  dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock
  ARM: dts: Keep some essential LDOs enabled for arndale-octa board
  ARM: dts: Disable MDMA1 node for arndale-octa board
  ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion
  serial: s3c: Fix build of header without serial_core.h preinclusion
  ARM: EXYNOS: Allow wake-up using GIC interrupts
  ARM: EXYNOS: Stop using legacy Samsung PM code
  ARM: EXYNOS: Remove PM initcalls and useless indirection
  ARM: EXYNOS: Fix abuse of CONFIG_PM
  ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h
  ARM: SAMSUNG: Move common save/restore helpers to separate file
  ARM: SAMSUNG: Move Samsung PM debug code into separate file
  ARM: SAMSUNG: Consolidate PM debug functions
  ARM: SAMSUNG: Use debug_ll_addr() to get UART base address
  ...

4 files changed, 98 insertions, 17 deletions

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 0e001a489a7..58c2b844e0a 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,5 +9,6 @@ config ARCH_ZYNQ
 	select ICST
 	select CADENCE_TTC_TIMER
 	select ARM_GLOBAL_TIMER if !CPU_FREQ
+	select MFD_SYSCON
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index a39be8e8085..6fcc584c1a1 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -19,6 +19,7 @@
 #include <linux/cpumask.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/clk/zynq.h>
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
@@ -75,11 +76,16 @@ static void __init zynq_init_machine(void)
 
 	platform_device_register(&zynq_cpuidle_device);
 	platform_device_register_full(&devinfo);
+
+	zynq_slcr_init();
 }
 
 static void __init zynq_timer_init(void)
 {
-	zynq_slcr_init();
+	zynq_early_slcr_init();
+
+	zynq_clock_init();
+	of_clk_init(NULL);
 	clocksource_of_init();
 }
 
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index c22c92cea8c..b097844d317 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -20,6 +20,7 @@
 void zynq_secondary_startup(void);
 
 extern int zynq_slcr_init(void);
+extern int zynq_early_slcr_init(void);
 extern void zynq_slcr_system_reset(void);
 extern void zynq_slcr_cpu_stop(int cpu);
 extern void zynq_slcr_cpu_start(int cpu);
@@ -33,7 +34,6 @@ extern int zynq_cpun_start(u32 address, int cpu);
 extern struct smp_operations zynq_smp_ops __initdata;
 #endif
 
-extern void __iomem *zynq_slcr_base;
 extern void __iomem *zynq_scu_base;
 
 /* Hotplug */
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 1836d5a3460..a37d49a6e65 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -15,7 +15,9 @@
  */
 
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/clk/zynq.h>
 #include "common.h"
 
@@ -29,7 +31,56 @@
 #define SLCR_A9_CPU_CLKSTOP		0x10
 #define SLCR_A9_CPU_RST			0x1
 
-void __iomem *zynq_slcr_base;
+static void __iomem *zynq_slcr_base;
+static struct regmap *zynq_slcr_regmap;
+
+/**
+ * zynq_slcr_write - Write to a register in SLCR block
+ *
+ * @val:	Value to write to the register
+ * @offset:	Register offset in SLCR block
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static int zynq_slcr_write(u32 val, u32 offset)
+{
+	if (!zynq_slcr_regmap) {
+		writel(val, zynq_slcr_base + offset);
+		return 0;
+	}
+
+	return regmap_write(zynq_slcr_regmap, offset, val);
+}
+
+/**
+ * zynq_slcr_read - Read a register in SLCR block
+ *
+ * @val:	Pointer to value to be read from SLCR
+ * @offset:	Register offset in SLCR block
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static int zynq_slcr_read(u32 *val, u32 offset)
+{
+	if (zynq_slcr_regmap)
+		return regmap_read(zynq_slcr_regmap, offset, val);
+
+	*val = readl(zynq_slcr_base + offset);
+
+	return 0;
+}
+
+/**
+ * zynq_slcr_unlock - Unlock SLCR registers
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static inline int zynq_slcr_unlock(void)
+{
+	zynq_slcr_write(SLCR_UNLOCK_MAGIC, SLCR_UNLOCK_OFFSET);
+
+	return 0;
+}
 
 /**
  * zynq_slcr_system_reset - Reset the entire system.
@@ -43,16 +94,16 @@ void zynq_slcr_system_reset(void)
 	 * Note that this seems to require raw i/o
 	 * functions or there's a lockup?
 	 */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+	zynq_slcr_unlock();
 
 	/*
 	 * Clear 0x0F000000 bits of reboot status register to workaround
 	 * the FSBL not loading the bitstream after soft-reboot
 	 * This is a temporary solution until we know more.
 	 */
-	reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
-	writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
-	writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
+	zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET);
+	zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET);
+	zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET);
 }
 
 /**
@@ -61,11 +112,13 @@ void zynq_slcr_system_reset(void)
  */
 void zynq_slcr_cpu_start(int cpu)
 {
-	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	u32 reg;
+
+	zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg &= ~(SLCR_A9_CPU_RST << cpu);
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
@@ -74,19 +127,40 @@ void zynq_slcr_cpu_start(int cpu)
  */
 void zynq_slcr_cpu_stop(int cpu)
 {
-	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	u32 reg;
+
+	zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
- * zynq_slcr_init
- * Returns 0 on success, negative errno otherwise.
+ * zynq_slcr_init - Regular slcr driver init
+ *
+ * Return:	0 on success, negative errno otherwise.
  *
  * Called early during boot from platform code to remap SLCR area.
  */
 int __init zynq_slcr_init(void)
 {
+	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
+	if (IS_ERR(zynq_slcr_regmap)) {
+		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * zynq_early_slcr_init - Early slcr init function
+ *
+ * Return:	0 on success, negative errno otherwise.
+ *
+ * Called very early during boot from platform code to unlock SLCR.
+ */
+int __init zynq_early_slcr_init(void)
+{
 	struct device_node *np;
 
 	np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
@@ -101,13 +175,13 @@ int __init zynq_slcr_init(void)
 		BUG();
 	}
 
+	np->data = (__force void *)zynq_slcr_base;
+
 	/* unlock the SLCR so that registers can be changed */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+	zynq_slcr_unlock();
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
 
-	zynq_clock_init(zynq_slcr_base);
-
 	of_node_put(np);
 
 	return 0;