Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
  ARM: S5P64X0: External Interrupt Support
  ARM: EXYNOS4: Enable MFC on Samsung NURI
  ARM: EXYNOS4: Enable MFC on universal_c210
  ARM: S5PV210: Enable MFC on Goni
  ARM: S5P: Add support for MFC device
  ARM: EXYNOS4: Add support FIMD on SMDKC210
  ARM: EXYNOS4: Add platform device and helper functions for FIMD
  ARM: EXYNOS4: Add resource definition for FIMD
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: SAMSUNG: Add IRQ_I2S0 definition
  ARM: SAMSUNG: Add platform device for idma
  ARM: EXYNOS4: Add more registers to be saved and restored for PM
  ARM: EXYNOS4: Add more register addresses of CMU
  ARM: EXYNOS4: Add platform device for dwmci driver
  ARM: EXYNOS4: configure rtc-s3c on NURI
  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
  ARM: EXYNOS4: configure ADC on NURI
  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
  ...

Fix up tons of silly conflicts:
 - arch/arm/mach-davinci/include/mach/psc.h
 - arch/arm/mach-exynos4/Kconfig
 - arch/arm/mach-exynos4/mach-smdkc210.c
 - arch/arm/mach-exynos4/pm.c
 - arch/arm/mach-imx/mm-imx1.c
 - arch/arm/mach-imx/mm-imx21.c
 - arch/arm/mach-imx/mm-imx25.c
 - arch/arm/mach-imx/mm-imx27.c
 - arch/arm/mach-imx/mm-imx31.c
 - arch/arm/mach-imx/mm-imx35.c
 - arch/arm/mach-mx5/mm.c
 - arch/arm/mach-s5pv210/mach-goni.c
 - arch/arm/mm/Kconfig

12 files changed, 146 insertions, 108 deletions

diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 30e18bc6064..846cd7d69e3 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -25,7 +25,6 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
 
 #include <sound/wm8903.h>
 
@@ -83,22 +82,6 @@ static struct platform_device harmony_audio_device = {
 	},
 };
 
-static struct tegra_i2c_platform_data harmony_i2c1_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_i2c2_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_i2c3_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_dvc_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
 static struct wm8903_platform_data harmony_wm8903_pdata = {
 	.irq_active_low = 0,
 	.micdet_cfg = 0,
@@ -121,11 +104,6 @@ static struct i2c_board_info __initdata wm8903_board_info = {
 
 static void __init harmony_i2c_init(void)
 {
-	tegra_i2c_device1.dev.platform_data = &harmony_i2c1_platform_data;
-	tegra_i2c_device2.dev.platform_data = &harmony_i2c2_platform_data;
-	tegra_i2c_device3.dev.platform_data = &harmony_i2c3_platform_data;
-	tegra_i2c_device4.dev.platform_data = &harmony_dvc_platform_data;
-
 	platform_device_register(&tegra_i2c_device1);
 	platform_device_register(&tegra_i2c_device2);
 	platform_device_register(&tegra_i2c_device3);
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index 2643d1bd568..bdd2627dd87 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -141,12 +141,10 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
 };
 
 static struct tegra_gpio_table gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_SD1_CD,	.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_CD,	.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_WP,	.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_POWER,	.enable = true	},
+	{ .gpio = TEGRA_GPIO_SD1_CD,	.enable = true },
+	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
+	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
+	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
 };
 
 void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 57e50a823ee..ea2f79c9879 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/pda_power.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -34,6 +35,7 @@
 #include <mach/iomap.h>
 #include <mach/irqs.h>
 #include <mach/sdhci.h>
+#include <mach/gpio.h>
 
 #include "board.h"
 #include "board-paz00.h"
@@ -66,10 +68,22 @@ static struct platform_device debug_uart = {
 static struct platform_device *paz00_devices[] __initdata = {
 	&debug_uart,
 	&tegra_sdhci_device1,
-	&tegra_sdhci_device2,
 	&tegra_sdhci_device4,
 };
 
+static void paz00_i2c_init(void)
+{
+	platform_device_register(&tegra_i2c_device1);
+	platform_device_register(&tegra_i2c_device2);
+	platform_device_register(&tegra_i2c_device4);
+}
+
+static void paz00_usb_init(void)
+{
+	platform_device_register(&tegra_ehci2_device);
+	platform_device_register(&tegra_ehci3_device);
+}
+
 static void __init tegra_paz00_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
@@ -84,23 +98,16 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	{ NULL,		NULL,		0,		0},
 };
 
-
 static struct tegra_sdhci_platform_data sdhci_pdata1 = {
 	.cd_gpio	= TEGRA_GPIO_SD1_CD,
 	.wp_gpio	= TEGRA_GPIO_SD1_WP,
 	.power_gpio	= TEGRA_GPIO_SD1_POWER,
 };
 
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
+static struct tegra_sdhci_platform_data sdhci_pdata4 = {
 	.cd_gpio	= -1,
 	.wp_gpio	= -1,
 	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= TEGRA_GPIO_SD4_CD,
-	.wp_gpio	= TEGRA_GPIO_SD4_WP,
-	.power_gpio	= TEGRA_GPIO_SD4_POWER,
 	.is_8bit	= 1,
 };
 
@@ -111,13 +118,15 @@ static void __init tegra_paz00_init(void)
 	paz00_pinmux_init();
 
 	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
 	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
 
 	platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
+
+	paz00_i2c_init();
+	paz00_usb_init();
 }
 
-MACHINE_START(PAZ00, "paz00")
+MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
 	.boot_params	= 0x00000100,
 	.fixup		= tegra_paz00_fixup,
 	.map_io         = tegra_map_common_io,
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index da193ca76d3..d4ff39ddaeb 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,12 +17,10 @@
 #ifndef _MACH_TEGRA_BOARD_PAZ00_H
 #define _MACH_TEGRA_BOARD_PAZ00_H
 
-#define TEGRA_GPIO_SD1_CD               TEGRA_GPIO_PV5
-#define TEGRA_GPIO_SD1_WP               TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER            TEGRA_GPIO_PT3
-#define TEGRA_GPIO_SD4_CD               TEGRA_GPIO_PH2
-#define TEGRA_GPIO_SD4_WP               TEGRA_GPIO_PH3
-#define TEGRA_GPIO_SD4_POWER            TEGRA_GPIO_PI6
+#define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
+#define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
+#define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
+#define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
 
 void paz00_pinmux_init(void);
 
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 10fbbdc8699..56cbabf6aa6 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -19,7 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
@@ -66,22 +65,6 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
 	{ NULL,		NULL,		0,		0},
 };
 
-static struct tegra_i2c_platform_data seaboard_i2c1_platform_data = {
-	.bus_clk_rate	= 400000.
-};
-
-static struct tegra_i2c_platform_data seaboard_i2c2_platform_data = {
-	.bus_clk_rate	= 400000,
-};
-
-static struct tegra_i2c_platform_data seaboard_i2c3_platform_data = {
-	.bus_clk_rate	= 400000,
-};
-
-static struct tegra_i2c_platform_data seaboard_dvc_platform_data = {
-	.bus_clk_rate	= 400000,
-};
-
 static struct gpio_keys_button seaboard_gpio_keys_buttons[] = {
 	{
 		.code		= SW_LID,
@@ -137,9 +120,9 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
 static struct platform_device *seaboard_devices[] __initdata = {
 	&debug_uart,
 	&tegra_pmu_device,
-	&tegra_sdhci_device1,
-	&tegra_sdhci_device3,
 	&tegra_sdhci_device4,
+	&tegra_sdhci_device3,
+	&tegra_sdhci_device1,
 	&seaboard_gpio_keys_device,
 };
 
@@ -161,11 +144,6 @@ static void __init seaboard_i2c_init(void)
 
 	i2c_register_board_info(3, &adt7461_device, 1);
 
-	tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data;
-	tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data;
-	tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data;
-	tegra_i2c_device4.dev.platform_data = &seaboard_dvc_platform_data;
-
 	platform_device_register(&tegra_i2c_device1);
 	platform_device_register(&tegra_i2c_device2);
 	platform_device_register(&tegra_i2c_device3);
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index d9dc5d297ed..47c596cdbf3 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -29,7 +29,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
 	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
@@ -126,7 +126,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
 	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
@@ -145,6 +145,9 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
 static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true	}, /* mmc4 cd */
 	{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true	}, /* mmc4 wp */
+
+	{ .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */
+	{ .gpio = TRIMSLICE_GPIO_USB2_RST,  .enable = true }, /* USB2 PHY rst */
 };
 
 void __init trimslice_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index cda4cfd78e8..89a6d2adc1d 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -23,6 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -30,6 +32,7 @@
 
 #include <mach/iomap.h>
 #include <mach/sdhci.h>
+#include <mach/gpio.h>
 
 #include "board.h"
 #include "clock.h"
@@ -71,12 +74,58 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
 	.power_gpio	= -1,
 };
 
+static struct platform_device trimslice_audio_device = {
+	.name	= "tegra-snd-trimslice",
+	.id	= 0,
+};
+
 static struct platform_device *trimslice_devices[] __initdata = {
 	&debug_uart,
 	&tegra_sdhci_device1,
 	&tegra_sdhci_device4,
+	&tegra_i2s_device1,
+	&tegra_das_device,
+	&tegra_pcm_device,
+	&trimslice_audio_device,
 };
 
+static struct i2c_board_info trimslice_i2c3_board_info[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+	{
+		I2C_BOARD_INFO("em3027", 0x56),
+	},
+};
+
+static void trimslice_i2c_init(void)
+{
+	platform_device_register(&tegra_i2c_device1);
+	platform_device_register(&tegra_i2c_device2);
+	platform_device_register(&tegra_i2c_device3);
+
+	i2c_register_board_info(2, trimslice_i2c3_board_info,
+				ARRAY_SIZE(trimslice_i2c3_board_info));
+}
+
+static void trimslice_usb_init(void)
+{
+	int err;
+
+	platform_device_register(&tegra_ehci3_device);
+
+	platform_device_register(&tegra_ehci2_device);
+
+	err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH,
+			       "usb1mode");
+	if (err) {
+		pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err);
+		return;
+	}
+
+	platform_device_register(&tegra_ehci1_device);
+}
+
 static void __init tegra_trimslice_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
@@ -90,6 +139,10 @@ static void __init tegra_trimslice_fixup(struct machine_desc *desc,
 static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uarta",	"pll_p",	216000000,	true },
+	{ "pll_a",	"pll_p_out1",	56448000,	true },
+	{ "pll_a_out0",	"pll_a",	11289600,	true },
+	{ "cdev1",	NULL,		0,		true },
+	{ "i2s1",	"pll_a_out0",	11289600,	false},
 	{ NULL,		NULL,		0,		0},
 };
 
@@ -112,6 +165,9 @@ static void __init tegra_trimslice_init(void)
 	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
 
 	platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices));
+
+	trimslice_i2c_init();
+	trimslice_usb_init();
 }
 
 MACHINE_START(TRIMSLICE, "trimslice")
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
index e8ef6291c6f..7a7dee86b4d 100644
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ b/arch/arm/mach-tegra/board-trimslice.h
@@ -20,6 +20,9 @@
 #define TRIMSLICE_GPIO_SD4_CD	TEGRA_GPIO_PP1	/* mmc4 cd */
 #define TRIMSLICE_GPIO_SD4_WP	TEGRA_GPIO_PP2	/* mmc4 wp */
 
+#define TRIMSLICE_GPIO_USB1_MODE	TEGRA_GPIO_PV2 /* USB1 mode */
+#define TRIMSLICE_GPIO_USB2_RST		TEGRA_GPIO_PV0 /* USB2 PHY reset */
+
 void trimslice_pinmux_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 1528f9daef1..57e35d20c24 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -22,10 +22,14 @@
 #include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
 #include <linux/serial_8250.h>
+#include <linux/i2c-tegra.h>
+#include <linux/platform_data/tegra_usb.h>
 #include <asm/pmu.h>
 #include <mach/irqs.h>
 #include <mach/iomap.h>
 #include <mach/dma.h>
+#include <mach/usb_phy.h>
+#include "gpio-names.h"
 
 static struct resource i2c_resource1[] = {
 	[0] = {
@@ -79,13 +83,29 @@ static struct resource i2c_resource4[] = {
 	},
 };
 
+static struct tegra_i2c_platform_data tegra_i2c1_platform_data = {
+	.bus_clk_rate   = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_i2c2_platform_data = {
+	.bus_clk_rate   = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_i2c3_platform_data = {
+	.bus_clk_rate   = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_dvc_platform_data = {
+	.bus_clk_rate   = 400000,
+};
+
 struct platform_device tegra_i2c_device1 = {
 	.name		= "tegra-i2c",
 	.id		= 0,
 	.resource	= i2c_resource1,
 	.num_resources	= ARRAY_SIZE(i2c_resource1),
 	.dev = {
-		.platform_data = 0,
+		.platform_data = &tegra_i2c1_platform_data,
 	},
 };
 
@@ -95,7 +115,7 @@ struct platform_device tegra_i2c_device2 = {
 	.resource	= i2c_resource2,
 	.num_resources	= ARRAY_SIZE(i2c_resource2),
 	.dev = {
-		.platform_data = 0,
+		.platform_data = &tegra_i2c2_platform_data,
 	},
 };
 
@@ -105,7 +125,7 @@ struct platform_device tegra_i2c_device3 = {
 	.resource	= i2c_resource3,
 	.num_resources	= ARRAY_SIZE(i2c_resource3),
 	.dev = {
-		.platform_data = 0,
+		.platform_data = &tegra_i2c3_platform_data,
 	},
 };
 
@@ -115,7 +135,7 @@ struct platform_device tegra_i2c_device4 = {
 	.resource	= i2c_resource4,
 	.num_resources	= ARRAY_SIZE(i2c_resource4),
 	.dev = {
-		.platform_data = 0,
+		.platform_data = &tegra_dvc_platform_data,
 	},
 };
 
@@ -334,6 +354,28 @@ static struct resource tegra_usb3_resources[] = {
 	},
 };
 
+static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+	/* All existing boards use GPIO PV0 for phy reset */
+	.reset_gpio = TEGRA_GPIO_PV0,
+	.clk = "cdev2",
+};
+
+static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+	.operating_mode = TEGRA_USB_OTG,
+	.power_down_on_bus_suspend = 1,
+};
+
+static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+	.phy_config = &tegra_ehci2_ulpi_phy_config,
+	.operating_mode = TEGRA_USB_HOST,
+	.power_down_on_bus_suspend = 1,
+};
+
+static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+	.operating_mode = TEGRA_USB_HOST,
+	.power_down_on_bus_suspend = 1,
+};
+
 static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32);
 
 struct platform_device tegra_ehci1_device = {
@@ -342,6 +384,7 @@ struct platform_device tegra_ehci1_device = {
 	.dev	= {
 		.dma_mask	= &tegra_ehci_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &tegra_ehci1_pdata,
 	},
 	.resource = tegra_usb1_resources,
 	.num_resources = ARRAY_SIZE(tegra_usb1_resources),
@@ -353,6 +396,7 @@ struct platform_device tegra_ehci2_device = {
 	.dev	= {
 		.dma_mask	= &tegra_ehci_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &tegra_ehci2_pdata,
 	},
 	.resource = tegra_usb2_resources,
 	.num_resources = ARRAY_SIZE(tegra_usb2_resources),
@@ -364,6 +408,7 @@ struct platform_device tegra_ehci3_device = {
 	.dev	= {
 		.dma_mask	= &tegra_ehci_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &tegra_ehci3_pdata,
 	},
 	.resource = tegra_usb3_resources,
 	.num_resources = ARRAY_SIZE(tegra_usb3_resources),
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
deleted file mode 100644
index 425b42e91ef..00000000000
--- a/arch/arm/mach-tegra/include/mach/barriers.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/barriers.h
- *
- * Copyright (C) 2010 ARM Ltd.
- * Written by Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_BARRIERS_H
-#define __MACH_BARRIERS_H
-
-#include <asm/outercache.h>
-
-#define rmb()		dsb()
-#define wmb()		do { dsb(); outer_sync(); } while (0)
-#define mb()		wmb()
-
-#endif	/* __MACH_BARRIERS_H */
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 32ca6267b9f..0886cbccdde 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -121,7 +121,7 @@ void __init smp_init_cpus(void)
 	}
 
 	for (i = 0; i < ncores; i++)
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 
 	set_smp_cross_call(gic_raise_softirq);
 }
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index bb618075fab..0fe9b3ee294 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -2182,8 +2182,8 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("disp1",	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("disp2",	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* scales with voltage and process_id */
+	PERIPH_CLK("disp1",	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_plld_pllc_clkm,	MUX), /* scales with voltage and process_id */
+	PERIPH_CLK("disp2",	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_plld_pllc_clkm,	MUX), /* scales with voltage and process_id */
 	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
 	PERIPH_CLK("usb2",	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
 	PERIPH_CLK("usb3",	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0), /* requires min voltage */