Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific updates from Arnd Bergmann:
 "These changes are all for individual board files.  In the long run,
  those files will largely go away, and the amount of changes appears to
  be continuously decreasing, which is a good sign.  This time around,
  changes are focused on tegra, omap and samsung."

Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot}
as per the 'for-linus' branch.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: EXYNOS: Add leds status1 and status2 on Origen board
  ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
  ARM: EXYNOS: Add missing .reserve field to SMDKC210
  ARM: EXYNOS: Add DRM device to SMDK4X12 board
  ARM: S3C64XX: Clean up after SPI driver platform data updates
  ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
  ARM: EXYNOS: Add framebuffer support for SMDK4X12
  ARM: EXYNOS: Add HSOTG support to SMDK4X12
  ARM: S5PV210: Add audio platform device in Goni board
  ARM: S5PV210: Add audio platform device in Aquila board
  ARM: EXYNOS: Add audio platform device in SMDKV310 board
  ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board
  ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
  ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
  ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
  ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
  ARM: omap3evm: enable VBUS switch for EHCI tranceiver
  ARM: OMAP3EVM: Adding USB internal LDOs board file
  ARM: OMAP3EVM: Add NAND flash definition
  ARM: OMAP3: cm-t35: add tvp5150 decoder support
  ...

4 files changed, 26 insertions, 4 deletions

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 88e983b0c82..77185c38188 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -152,6 +152,7 @@ config MACH_SMDKV210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -170,6 +171,7 @@ config MACH_SMDKV210
 	select S5PV210_SETUP_IDE
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV210
 
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index af528f9e97f..78028df86c5 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -600,10 +600,17 @@ static void aquila_setup_sdhci(void)
 	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
 };
 
+/* Audio device */
+static struct platform_device aquila_device_audio = {
+	.name = "smdk-audio",
+	.id = -1,
+};
+
 static struct platform_device *aquila_devices[] __initdata = {
 	&aquila_i2c_gpio_pmic,
 	&aquila_i2c_gpio5,
 	&aquila_device_gpiokeys,
+	&aquila_device_audio,
 	&s3c_device_fb,
 	&s5p_device_onenand,
 	&s3c_device_hsmmc0,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index bf5087c2b7f..822a5595068 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -859,12 +859,19 @@ static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
 	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
 };
 
+/* Audio device */
+static struct platform_device goni_device_audio = {
+	.name = "smdk-audio",
+	.id = -1,
+};
+
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
 	&goni_spi_gpio,
 	&goni_i2c_gpio_pmic,
 	&goni_i2c_gpio5,
+	&goni_device_audio,
 	&mmc2_fixed_voltage,
 	&goni_device_gpiokeys,
 	&s5p_device_mfc,
@@ -901,7 +908,7 @@ static void __init goni_sound_init(void)
 static void __init goni_map_io(void)
 {
 	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
@@ -959,8 +966,6 @@ static void __init goni_machine_init(void)
 	/* KEYPAD */
 	samsung_keypad_set_platdata(&keypad_data);
 
-	clk_xusbxti.rate = 24000000;
-
 	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
 }
 
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0d7ddec88eb..918b23d71fd 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
@@ -47,6 +48,7 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/mfc.h>
+#include <plat/clock.h>
 
 #include "common.h"
 
@@ -203,6 +205,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_cfcon,
@@ -216,6 +221,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_i2c2,
 	&s3c_device_rtc,
 	&s3c_device_ts,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
@@ -279,7 +285,7 @@ static struct platform_pwm_backlight_data smdkv210_bl_data = {
 static void __init smdkv210_map_io(void)
 {
 	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
 	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
@@ -314,6 +320,8 @@ static void __init smdkv210_machine_init(void)
 
 	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
 
+	s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
+
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }