Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...

17 files changed, 38 insertions, 1199 deletions

diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c910127..645a8fe55f8 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core
 
-obj-y				+= common.o clock.o
+obj-y				+= common.o
 
 # Core support
 
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index c1bcc4a6d3a..00000000000
--- a/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-#include "regs-sys.h"
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
-	.name		= "xusbxti",
-	.rate		= 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.devname        = "s3c2440-i2c.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C6410_CLKCON_PCLK_I2C1,
-	}, {
-		.name		= "keypad",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
-	}, {
-		.name		= "dma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	}, {
-		.name		= "3dse",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_3DSE,
-	}, {
-		.name		= "hclk_secur",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SECUR,
-	}, {
-		.name		= "sdma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA1,
-	}, {
-		.name		= "sdma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA0,
-	}, {
-		.name		= "hclk_jpeg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_JPEG,
-	}, {
-		.name		= "camif",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_CAMIF,
-	}, {
-		.name		= "hclk_scaler",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SCALER,
-	}, {
-		.name		= "2d",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_2D,
-	}, {
-		.name		= "tv",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_TV,
-	}, {
-		.name		= "post0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_POST0,
-	}, {
-		.name		= "rot",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_ROT,
-	}, {
-		.name		= "hclk_mfc",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_MFC,
-	}, {
-		.name		= "pclk_mfc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_MFC,
-	}, {
-		.name		= "dac27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_DAC27,
-	}, {
-		.name		= "tv27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_TV27,
-	}, {
-		.name		= "scaler27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER27,
-	}, {
-		.name		= "sclk_scaler",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER,
-	}, {
-		.name		= "post0_27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_POST0_27,
-	}, {
-		.name		= "secur",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SECUR,
-	}, {
-		.name		= "sclk_mfc",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MFC,
-	}, {
-		.name		= "sclk_jpeg",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_JPEG,
-	},
-};
-
-static struct clk clk_48m_spi0 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.0",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.1",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk clk_i2s0 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.0",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-};
-
-static struct clk clk_i2s1 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.1",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk clk_i2s2 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.2",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
-};
-#endif
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "otg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_USB,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	},
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c64xx_clk_arm_get_rate,
-		.set_rate	= s3c64xx_clk_arm_set_rate,
-		.round_rate	= s3c64xx_clk_arm_round_rate,
-	},
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.parent		= &clk_mout_mpll.clk,
-	.ops		= &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
-	.name		= "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk *clkset_audio2_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iisv4_cd,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-#endif
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "usb-bus-host",
-			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
-		.sources	= &clkset_uhost,
-	}, {
-		.clk	= {
-			.name		= "irda-bus",
-			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
-		.sources	= &clkset_irda,
-	}, {
-		.clk	= {
-			.name		= "camera",
-			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-			.enable		= s3c64xx_sclk_ctrl,
-			.parent		= &clk_h2,
-		},
-		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
-	},
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
-	.sources	= &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_audio_bus0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
-	.sources	= &clkset_audio0,
-};
-
-static struct clksrc_clk clk_audio_bus1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
-	.sources	= &clkset_audio1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clksrc_clk clk_audio_bus2 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.2",
-		.ctrlbit	= S3C6410_CLKCON_SCLK_AUDIO2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4  },
-	.sources	= &clkset_audio2,
-};
-#endif
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uclk,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_audio_bus0,
-	&clk_audio_bus1,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_48m_spi0,
-	&clk_48m_spi1,
-	&clk_i2s0,
-	&clk_i2s1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
-#ifdef CONFIG_CPU_S3C6410
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
-#endif
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
-		/* Synchronous mode */
-		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	else
-		/* Asynchronous mode */
-		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iisv4_cd,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-	&clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal, 
-				    unsigned armclk_divlimit)
-{
-	unsigned int cnt;
-
-	armclk_mask = armclk_divlimit;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
-		s3c_disable_clocks(clk_cdev[cnt], 1);
-
-	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
-		s3c_register_clksrc(clksrc_cdev[cnt], 1);
-	clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 73d79cf5e14..7d3cb58f185 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/clk-provider.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
@@ -38,7 +39,6 @@
 #include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/gpio-cfg.h>
@@ -50,6 +50,19 @@
 
 #include "common.h"
 
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+	xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+	xusbxti_f = freq;
+}
+
 /* uart registration process */
 
 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -67,7 +80,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= S3C6400_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
@@ -75,7 +87,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= S3C6410_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6410_init,
 		.name		= name_s3c6410,
@@ -213,8 +224,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 {
 	/*
 	 * FIXME: there is no better place to put this at the moment
-	 * (samsung_wdt_reset_init needs clocks)
+	 * (s3c64xx_clk_init needs ioremap and must happen before init_time
+	 * samsung_wdt_reset_init needs clocks)
 	 */
+	s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
 	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b3766..bd3bd562011 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,21 +22,21 @@
 void s3c64xx_init_irq(u32 vic0, u32 vic1);
 void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
 void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
 void s3c64xx_init_late(void);
 
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+	unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
 extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
 
 #else
-#define s3c6400_init_clocks NULL
 #define s3c6400_map_io NULL
 #define s3c6400_init NULL
 #endif
@@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal);
 extern  int s3c6410_init(void);
 extern void s3c6410_init_irq(void);
 extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
 
 #else
-#define s3c6410_init_clocks NULL
 #define s3c6410_map_io NULL
 #define s3c6410_init NULL
 #endif
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 759846c28d1..c511dfaae14 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -677,7 +677,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 		goto err_map;
 	}
 
-	clk_enable(dmac->clk);
+	clk_prepare_enable(dmac->clk);
 
 	dmac->regs = regs;
 	dmac->chanbase = chbase;
@@ -711,7 +711,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 	return 0;
 
 err_clk:
-	clk_disable(dmac->clk);
+	clk_disable_unprepare(dmac->clk);
 	clk_put(dmac->clk);
 err_map:
 	iounmap(regs);
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 05332b998ec..4f44aac7709 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -15,145 +15,21 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
+/*
+ * FIXME: Remove remaining definitions
+ */
+
 #define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
 
-#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
-#define S3C_APLL_CON		S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON		S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
-#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
-#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 #define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
 #define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
 
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
-#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
-#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
-#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-
-#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE	(1<<31)
-#define S3C_CLKCON_HCLK_UHOST	(1<<29)
-#define S3C_CLKCON_HCLK_SECUR	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
-#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
-#define S3C_CLKCON_HCLK_IROM	(1<<25)
-#define S3C_CLKCON_HCLK_DDR1	(1<<24)
-#define S3C_CLKCON_HCLK_DDR0	(1<<23)
-#define S3C_CLKCON_HCLK_MEM1	(1<<22)
-#define S3C_CLKCON_HCLK_MEM0	(1<<21)
-#define S3C_CLKCON_HCLK_USB	(1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
-#define S3C_CLKCON_HCLK_MDP	(1<<16)
-#define S3C_CLKCON_HCLK_DHOST	(1<<15)
-#define S3C_CLKCON_HCLK_IHOST	(1<<14)
-#define S3C_CLKCON_HCLK_DMA1	(1<<13)
-#define S3C_CLKCON_HCLK_DMA0	(1<<12)
-#define S3C_CLKCON_HCLK_JPEG	(1<<11)
-#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
-#define S3C_CLKCON_HCLK_SCALER	(1<<9)
-#define S3C_CLKCON_HCLK_2D	(1<<8)
-#define S3C_CLKCON_HCLK_TV	(1<<7)
-#define S3C_CLKCON_HCLK_POST0	(1<<5)
-#define S3C_CLKCON_HCLK_ROT	(1<<4)
-#define S3C_CLKCON_HCLK_LCD	(1<<3)
-#define S3C_CLKCON_HCLK_TZIC	(1<<2)
-#define S3C_CLKCON_HCLK_INTC	(1<<1)
-#define S3C_CLKCON_HCLK_MFC	(1<<0)
-
 /* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
-#define S3C_CLKCON_PCLK_SKEY		(1<<24)
-#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
-#define S3C_CLKCON_PCLK_SPI1		(1<<22)
-#define S3C_CLKCON_PCLK_SPI0		(1<<21)
-#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
-#define S3C_CLKCON_PCLK_HSITX		(1<<19)
-#define S3C_CLKCON_PCLK_GPIO		(1<<18)
-#define S3C_CLKCON_PCLK_IIC		(1<<17)
-#define S3C_CLKCON_PCLK_IIS1		(1<<16)
-#define S3C_CLKCON_PCLK_IIS0		(1<<15)
-#define S3C_CLKCON_PCLK_AC97		(1<<14)
-#define S3C_CLKCON_PCLK_TZPC		(1<<13)
-#define S3C_CLKCON_PCLK_TSADC		(1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
-#define S3C_CLKCON_PCLK_IRDA		(1<<10)
-#define S3C_CLKCON_PCLK_PCM1		(1<<9)
-#define S3C_CLKCON_PCLK_PCM0		(1<<8)
-#define S3C_CLKCON_PCLK_PWM		(1<<7)
-#define S3C_CLKCON_PCLK_RTC		(1<<6)
-#define S3C_CLKCON_PCLK_WDT		(1<<5)
 #define S3C_CLKCON_PCLK_UART3		(1<<4)
 #define S3C_CLKCON_PCLK_UART2		(1<<3)
 #define S3C_CLKCON_PCLK_UART1		(1<<2)
 #define S3C_CLKCON_PCLK_UART0		(1<<1)
-#define S3C_CLKCON_PCLK_MFC		(1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST		(1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
-#define S3C_CLKCON_SCLK_MMC2		(1<<26)
-#define S3C_CLKCON_SCLK_MMC1		(1<<25)
-#define S3C_CLKCON_SCLK_MMC0		(1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
-#define S3C_CLKCON_SCLK_SPI1		(1<<21)
-#define S3C_CLKCON_SCLK_SPI0		(1<<20)
-#define S3C_CLKCON_SCLK_DAC27		(1<<19)
-#define S3C_CLKCON_SCLK_TV27		(1<<18)
-#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
-#define S3C_CLKCON_SCLK_SCALER		(1<<16)
-#define S3C_CLKCON_SCLK_LCD27		(1<<15)
-#define S3C_CLKCON_SCLK_LCD		(1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
-#define S3C6410_CLKCON_FIMC		(1<<13)
-#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
-#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
-#define S3C_CLKCON_SCLK_POST0		(1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
-#define S3C_CLKCON_SCLK_SECUR		(1<<7)
-#define S3C_CLKCON_SCLK_IRDA		(1<<6)
-#define S3C_CLKCON_SCLK_UART		(1<<5)
-#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
-#define S3C_CLKCON_SCLK_MFC		(1<<3)
-#define S3C_CLKCON_SCLK_CAM		(1<<2)
-#define S3C_CLKCON_SCLK_JPEG		(1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
-#define S3C6400_CLKSRC_MFC		(1 << 4)
 
 /* MEM_SYS_CFG */
 #define MEM_SYS_CFG_INDEP_CF		0x4000
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54574e..d266dd5f706 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = {
 static void __init anw6410_map_io(void)
 {
 	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index eb8e5a1aca4..1a911df9e45 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -743,7 +743,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = {
 static void __init crag6410_map_io(void)
 {
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index f39569e0f2e..e8064044ef7 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -247,7 +247,7 @@ static struct platform_device *hmt_devices[] __initdata = {
 static void __init hmt_map_io(void)
 {
 	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fc043e3ecdf..58d46a3d7b7 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@ static void __init mini6410_map_io(void)
 	u32 tmp;
 
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c3908f1f..2067b0bf55b 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {};
 static void __init ncp_map_io(void)
 {
 	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 86d980b448f..0f47237be3b 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -337,13 +337,6 @@ err:
 	return ret;
 }
 
-static int __init smartq_usb_otg_init(void)
-{
-	clk_xusbxti.rate = 12000000;
-
-	return 0;
-}
-
 static int __init smartq_wifi_init(void)
 {
 	int ret;
@@ -377,7 +370,8 @@ static struct map_desc smartq_iodesc[] __initdata = {};
 void __init smartq_map_io(void)
 {
 	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
+	s3c64xx_set_xusbxti_freq(12000000);
 	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -399,7 +393,6 @@ void __init smartq_machine_init(void)
 	WARN_ON(smartq_lcd_setup_gpio());
 	WARN_ON(smartq_power_off_init());
 	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_usb_otg_init());
 	WARN_ON(smartq_wifi_init());
 
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c0843aea..27381cfcabb 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {};
 static void __init smdk6400_map_io(void)
 {
 	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d90b450c564..2a7b32ca5c9 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -634,7 +634,7 @@ static void __init smdk6410_map_io(void)
 	u32 tmp;
 
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 6a1f91fea67..8cdb824a3b4 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear)
 #endif
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C_APLL_LOCK),
-	SAVE_ITEM(S3C_MPLL_LOCK),
-	SAVE_ITEM(S3C_EPLL_LOCK),
-	SAVE_ITEM(S3C_CLK_SRC),
-	SAVE_ITEM(S3C_CLK_DIV0),
-	SAVE_ITEM(S3C_CLK_DIV1),
-	SAVE_ITEM(S3C_CLK_DIV2),
-	SAVE_ITEM(S3C_CLK_OUT),
-	SAVE_ITEM(S3C_HCLK_GATE),
-	SAVE_ITEM(S3C_PCLK_GATE),
-	SAVE_ITEM(S3C_SCLK_GATE),
-	SAVE_ITEM(S3C_MEM0_GATE),
-
-	SAVE_ITEM(S3C_EPLL_CON1),
-	SAVE_ITEM(S3C_EPLL_CON0),
-
 	SAVE_ITEM(S3C64XX_MEM0DRVCON),
 	SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C_APLL_CON),
-	SAVE_ITEM(S3C_MPLL_CON),
-#endif
 };
 
 static struct sleep_save misc_save[] = {
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714c6f1..331fe8e5814 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -58,12 +58,6 @@ void __init s3c6400_map_io(void)
 	s3c64xx_onenand1_setname("s3c6400-onenand");
 }
 
-void __init s3c6400_init_clocks(int xtal)
-{
-	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6400_init_irq(void)
 {
 	/* VIC0 does not have IRQS 5..7,
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fdf180..7e6fa125584 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -62,13 +62,6 @@ void __init s3c6410_map_io(void)
 	s3c_cfcon_setname("s3c64xx-pata");
 }
 
-void __init s3c6410_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6410_init_irq(void)
 {
 	/* VIC0 is missing IRQ7, VIC1 is fully populated. */